For internal use 1 © Nokia Siemens Networks

Flexi EDGE BTS Commissioning & Integration / FAs / 24.09.2007

Commissioning & Integration

Flexi EDGE BTS

2

© Nokia Siemens Networks


Intellectual Property Rights All copyrights and intellectual property rights for Nokia training documentation, product documentation and slide presentation material, all of which are forthwith known as Nokia training material, are the exclusive property of Nokia. Nokia owns the rights to copying, modification, translation, adaptation or derivatives including any improvements or developments. Nokia has the sole right to copy, distribute, amend, modify, develop, license, sublicense, sell, transfer and assign the Nokia training material. Individuals can use the Nokia training material for their own personal self-development only, those same individuals cannot subsequently on that same Intellectual Property to others without the prior written agreement of Nokia. The Nokia training material cannot be used outside of an agreed Nokia training session for development of groups without the prior written agreement of Nokia.

Legal notice

3



At the end of this module the participant will be able to: • Successfully commission & integrate the Flexi EDGE BTS

Objectives

4

•

•

•

•



(modules, cabling, antennas and radios) must be complete. Make sure you have a PC with Nokia Flexi EDGE BTS Manager installed. Make sure you have a 10/100 Mbit/s Ethernet cable available for the connection between the BTS and your PC. You need to have the parameter values available that need to be entered during commissioning. The parameter values are provided by the network planning process. BSC settings: the BTS site must already be created at the BSC for commissioning to be successfully completed.

• Before commissioning, the physical installation of the BTS

Commissioning Prerequisites 1/2

5



BSC and the BTS must already be set up so that there is a transmission path from the BSC to the BTS for all the Abis channels. • If there are any intermediate transmission hubs between the BSC and the BTS, the cross connections in the hubs should either be set up at the E1/T1 link level, or at the n x 64 kbit/s level for all the channels to the BTS in an E1/T1 link. • With the Flexi transmission interface Flexbus sub-module (FIFA), the transmission link will be established during commissioning.

• Transmission network setup: the transmission link(s) between the

Commissioning Prerequisites 2/2

6



In all other cases (IP setup is like for WCDMA BTS / AXC access)

If the Transmission unit type is FIFA, the IP settings of the PC should be as follows: IP address: 192.168.255.130 Subnet Mask: 255.255.255.128 Default Gateway: none

IP setup of the local Commissioning PC

7



Local Connection

8



Undo Commissioning 1/3

9




10




11



Commissioning options

12



Site Specific Information

13



Hardware Configuration

14



Cabling Configuration 1/4

By-

By-

2-way

2-way

4-way

4-way

3

4

1 to 2

3 to 4

3 to 4

5 to 8


By-

1 to 2

15

TX Combining

Number of TRXs

4

2

2

1

2

2

1

Number of Dual TRX Modules (EXxA)


2UD

1UD (no diversity)

2UD

1UD (no diversity)

2UD

2UD

2UD

RX diversity

1

1

1

1

2

2

1

Number of Dual Duplexer Modules (ERxA)

6

3

2

1

0

0

0

Number of Wideband Combiner SubModules (EWxB)

2

1

2

1

4

3

2

Number of Antennas

The following TRX / Sector configurations RF-CAD (Cable Auto Detection)



By-

1+1

16

TX Combining

HW Config.

1

Number of Dual TRX Modules (EXxA)

1

Number of DDU Modules (ERxA)


1UD (no diversity)

RX diversity

0

Number of Wideband Combiner SubModules (EWxB) 1

Number of System Modules (ESMA)

1

Number of Antennas per sector

The following TRX / Sector configurations RF-CAD (Cable Auto Detection)


2

Number of Antennas

17




18



Antenna Settings 1/3

19




20




21



Battery Backup Unit

22



Other ive Units

23



Transmission Parameters

24



Line interface settings

25



Synchronization

26



Abis Allocation 1/2

27



Abis Allocation 2/2

28



Abis Protection

29



Cross Connections 1/2

30



Cross Connections 2/2

31



Q1 Management

32



FlexiHub Manager

33



Site Commissioning File

34



SCF Save Dialog

35



Commissioning Progress…

36



BTS has been successfully commissioned

37



The Flexi EDGE BTS can be seen as operational, if: • Abis interface is connected • Operational state is Working (seen from the BSC as WO) • Local (BTS Manager) indications are: – O&M Link Established – BCF operational state: Supervisory – all TRXs operational states: Supervisory • Abis Loop Tests have run successfully • TRX Tests have run successfully • Test calls are successful • The BTS is free of unexpected alarms • Remote Management (BSC / NetAct) is working.

Operational Functionality

38



Check operational state: BCF

39



Check operational state: TRX

Overview 26281t

More details 6y5l6z

Related Documents 3h463d

Flexi Edge Bts Configurations 66423o

06 Ra41126en05gla0 Lte Flexi Multiradio Bts Commissioning And Integration 2p6o1l

Nokia Nsn Flexi Wcdma Bts Commissioning And Integration 4c1n29

Guide To Nokia Flexi Edge Bts Documentation g2u1g

Flexi Edge 5g4t12

More Documents from "Juan Tioluka" 5d44

110116 - Aportes Para Comentar Jn. 1, 19 - 34 5v2046

130324 - Aportes Para El Comentario Lucas 22, 14 - 23. 56 6n4r70

Actividad 04 Victor Quino 60q1x

Lm301.pdf 4q3g5o

Tus-etapas-camino-s-ed1803-ronces-santia-180407-rutasasantiago.pdf 472140