09 Manual Reluxsuite[1] 6b4t72

ReluxSuite

Welcome to the simulation world

Fit for ReluxSuite May 2010

INSTALLATION

2/81

CONTENT Content 1

.......................................................................................................2

Installation ..............................................................................................4

1.1

Recommended system requirements ......................................................... 4

1.2

Installation of the program and the luminaire catalogue off a DVD ................ 4

1.3

Installation of the program as a ................................................. 6

1.4

Relux Online Update ............................................................................... 6

1.5

Activation, registration ............................................................................ 8

2

About ReluxSuite and this guide ............................................................10

3

Part 1: get started in 5 minutes .............................................................11

3.1

New look and feel: the revised interface ........................................... 11

3.2

The logic governing the rotating and shifting of objects has been changed... 11

3.3

Import and Export dwg or dxf formatted files ........................................... 13

3.4

Edit and draw objects in the 3D view ...................................................... 14

3.5

ReluxEnergy ........................................................................................ 15

3.6

ReluxTunnel ......................................................................................... 15

3.7

New ReluxMovie module ........................................................................ 17

3.8

New, GR and TI glare rating outdoors ..................................................... 20

4

Part 2: enhanced features for advanced s .......................................22

4.1

Move or rotate objects in a new way ....................................................... 22

4.2

Move and rotate working plane .............................................................. 24

4.3

Edit and draw objects in the 3D view ...................................................... 25

4.4

Align objects to external walls ................................................................ 26

4.5

Modification of insertion points ............................................................... 28

4.6

Multiple insert function .......................................................................... 28

4.7

Placing grid/ raster snap........................................................................ 29

4.8

Move and scale room elements .............................................................. 30

4.9

Draw polygonal scenes (interior, exterior) ............................................... 31

4.10

CAD import with ReluxPro...................................................................... 35

4.11

New ReluxMovie Module ........................................................................ 44

4.11.1

Introduction ..................................................................................... 44

4.11.2

Animation bar .................................................................................. 44

4.11.3

Maintaining the observer height.......................................................... 45

4.11.4

Animation path ................................................................................. 45

4.11.5

Multiple animation paths .................................................................... 46

© Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

INSTALLATION

3/81

4.11.6

Interpolation .................................................................................... 46

4.11.7

Stretch-compress animation............................................................... 47

4.11.8

Animation properties ......................................................................... 48

4.11.9

Rendering the animation.................................................................... 48

4.12

New GR and TI glare rating for outdoors.................................................. 51

4.12.1

What is calculated? ........................................................................... 51

4.12.2

Measuring area and observers ............................................................ 52

4.13

Raytracing calculation in Relux Pro ......................................................... 54

4.13.1

How to use the Relux raytracing calculation ......................................... 54

4.13.2

The Standard mode parameters ......................................................... 56

4.13.3

The Expert mode parameters ............................................................. 58

4.13.4

Set up a viewpoint ............................................................................ 62

4.13.5

Raster measuring areas and start of calculation .................................... 62

4.14

ReluxEnergy ........................................................................................ 64

4.15

Tunnel module ..................................................................................... 73

© Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

INSTALLATION

1

4/81

INSTALLATION

1.1 Recommended system requirements Windows 2000/XP/Vista®/Windows7 Pentium duo core with 2 GHz or above, 1 GB RAM or more, > 2GB RAM with Vista® Graphics card ing OpenGL The disk space required on your hard disk can vary depending on the Installation type selected. 1.2 Installation of the program and the luminaire catalogue off a DVD Please close all other programs before installing the program. Place the DVD in your DVD drive. The setup for ReluxSuite ought to start automatically. If the setup routine does not start, this probably means that the „Autostart“ function has been deactivated. You should open Windows Explorer, select the drive in which the Relux DVD is located and start the setup manually by double-clicking on the start.exe file. The installation program starts with the opening screen for selecting the language. The language selected here applies for the installation only. Different languages can be selected later on when using the program and also for the program outputs. You start the installation of the main program by pressing on ReluxSuite (Fig. 1).

Fig. 1

Note: If the 2007 Version is already installed on your system, enter a new path for the ReluxSuite Version. If you need your projects from Relux Professional 2007 and the imported LDC’s at a later date, you can copy these into the ReluxSuite directory. You should now select Install ReluxSuite. You should now read the licence agreement and accept it so that you can continue with the installation (Fig. 2). Select the country in which you are located. In the next window, you can specify a path for the installation of ReluxPro. The default proposed for Relux is C:\Program Files.

© Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

INSTALLATION

5/81

Fig. 2 Once the setup routine has copied the program data, you can specify the language for the interface, the outputs and the database. You can change these settings in the program at any time (Extras – Language). You can choose whether you install the manufacturer data locally (this is recommended if you have sufficient memory space, duration approx. 20 minutes) or whether you wish to use this data off the DVD. In the case of a network, we recommend copying the data to a network drive, so that all s can access it. You can select the manufacturers by double-clicking the tick or by using +++ or ---. If necessary please refer the Relux Professional 2007 manual for a more detailed description of the installation process.

© Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

INSTALLATION

6/81

1.3 Installation of the program as a

Fig. 3 If you do not have a ReluxPro DVD, you can the program free-of-charge from the Relux Informatik AG homepage at www.relux.biz (Fig. 3). 1.4 Relux Online Update Once the installation has been successfully completed, you can start ReluxPro for the first time. We recommend that you now update ReluxPro and the manufacturer databases that have been installed via the menu option Help - Online Update. Your PC needs to be connected to the Internet to do this. The update manager will start and you can specify whether ReluxPro should look for updates on a regular basis. We recommend you to leave this option switched on, with a time interval of two weeks. You will then always be able to work with the latest program and database versions (Fig. 4).

Fig. 4 Click on the “Check now” button. In the “Relux Update” window, you must then enter the name and that you selected when ing under “My Relux” on

© Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

INSTALLATION

7/81

the Relux Informatik AG homepage. After you have entered your data and clicked on the “Update” button, ReluxPro will look for updates.

Fig. 5 The ”Select packages” window will open, showing you all the updates that are available for your Relux Installation. You can select each item individually for the update in order to keep down the size of the . From Fig. 5 "Select packages" window can start ing the files that you have selected by clicking on the “Update” button. If ReluxPro is still open, it will then be closed. If there are projects that have not been saved, you will be prompted to save these before the update is started.

© Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

INSTALLATION

8/81

1.5 Activation, registration All activations and licences are istrated in ReluxPro Menu “help” – “about Relux”.

Fig. 6 ReluxPro is costfree, but has to be activated within 30 days. For activation you will need Internet. The activation is anonym. E-mail address is optional for receiving Newsletter (Fig. 6). I

© Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

INSTALLATION

9/81

Fig. 7 ReluxCAD, plugIn for Autocad from Autodesk needs a licence. Please insert ReluxCAD licence code here and activate with button. For activation you will need Internet. The activation is anonym. ReluxTunnel runs with a USB stick, which can be ordered from Relux.

© Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

ABOUT RELUXSUITE AND THIS GUIDE

10/81

2 ABOUT RELUXSUITE AND THIS GUIDE The ReluxSuite contains a numerous package of software programs, all of which come under the same name of ReluxSuite. The name of the Version is the calendar year, followed by a number that is increased for each new version (e.g. 2010-1). ReluxSuite includes the following programs: ReluxPro Tunnel (new) Relux Raytracing calculation (new) ReluxEnergy (new) ReluxOffer ReluxCAD ReluxTools Relux ReluxLum ReluxPickIt ReluxUpdate ReluxUninstall

Note: This “Fit for Relux Suite ” reference containing about 70 pages full of in-

formation. For all s with a deeper interest in the use of Relux raytracing we recommend to have a look in our separate manual. All Information are available for your purpose either on our DVD ReluxSuite , or on www.relux.biz.

© Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

PART 1: GET STARTED IN 5 MINUTES

11/81

3 PART 1: GET STARTED IN 5 MINUTES The following 4 features will help all advanced Relux s to switch in the new ReluxSuite. Enjoy a new look and feel: the interface with the main menus has been revised. For your convenience it is clearly structured and much more -friendly. Beside this first approach to ReluxSuite 2010 the interested Relux will find all information around Relux Suite 2010 in the second part of this manual.

Note: please refer part 2 of this guide for a more detailed description of this features.

3.1 New look and feel: the revised interface General: The interface can be changed interactively. The software will be delivered in the “Standard layout“ and can be enhanced to achieve the complete interface layout under “Window - Extended layout” (Fig. 8).

Fig. 8

3.2 The logic governing the rotating and shifting of objects has been changed Move or rotate objects in a new way General: moving and rotating objects works consistently in the same way in both the floor plan and the 3D view. These commands have been refined for the movement or rotation of objects in the 3D view as of ReluxPro 2006. 1. Just click to an object in your current scene to select it. 2. The coordinate system appears (Fig. 9). © Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

PART 1: GET STARTED IN 5 MINUTES

12/81

3. As soon as the mouse pointer approaches the coordinate system (the x, y and zaxis (z-axis only in 3D view) as well as the square areas between the axes), its initial color changes to yellow. 4. Click once with the left mouse button (Fig. 10). The color of the handle will change from yellow to orange and you can move the object around without keeping the left mouse button pressed (Fig. 11). 5. Press „Esc“ to leave this command

Fig. 9

Fig. 10

© Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

PART 1: GET STARTED IN 5 MINUTES

13/81

Fig. 11 3.3 Import and Export dwg or dxf formatted files General: The new powerful CAD interface allows to import all dwg, or dxf files within a few steps. Just start ReluxPro and try the assistant CAD import. Follow the 7 steps to import a CAD file: step 1: enter project data step 2: select a file (dwg, or dxf) step 3: define layers to be turned on, or off step 4: define drawing units (usual 1000/m for interior projects and 1/m exterior projects) step 5: set rotation (requires knowledge of the drawing, otherwise proceed to step 6) step 6: set origin (requires knowledge of the drawing, otherwise proceed to step 7) step 7: draw scene (interior, or exterior)

© Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

PART 1: GET STARTED IN 5 MINUTES

14/81

Fig. 12 To Export a Scene from your current project as dwg-, or dxf-file select “File – Export - Scene as DWG/ DXF…”. 3.4 Edit and draw objects in the 3D view General: towards the previous versions all edit functionalities can be performed in 2D and 3D view mode. This allows for e.g. the move, draw and scale of objects that are located on a wall like doors, windows and figures (Fig. 13)..

Fig. 13 move Room element in the 3D view

© Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

PART 1: GET STARTED IN 5 MINUTES

15/81

3.5 ReluxEnergy ReluxEnergy is the powerful free of charge module to calculate the energy consumption for interior lighting of non residential buildings. It refers to energy standards and norms as EN 15193, DIN 18599-4, (SIA380/4 & CTE HE-3, May 09).

Fig. 14 excerpt from a German energy

3.6 ReluxTunnel The tunnel calculation software has been developed for experts and refers to norms CIE88, CIE140 and SLG201 (Fig. 15+ Fig. 16). You must purchase a license to run this module. For further information please us via e-mail at [email protected], or by telephone on +41613330770.

Fig. 15 ReluxTunnel module

© Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

PART 1: GET STARTED IN 5 MINUTES

Fig. 16 New project type: Tunnel

© Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

16/81

PART 1: GET STARTED IN 5 MINUTES

17/81

3.7 New ReluxMovie module

Fig. 17 Animation module By incorporating several camera positions in the 3D View, the program subsequently generates a camera flight through the scene. Use the 3D View to set the individual camera positions. The following steps are necessary for generating a film: Add new animation from the “Animation” toolbar.

Step 1:

Select

Step 2:

Select the speed at which the camera should move.

Step 3:

Enter the first position in the 3D view. Select tion.

Step 4:

Repeat Step 3 for each additional camera position.

Step 5:

To check: play the animation with

Step 6:

You can change the route for the animation in the 3D view. To do this, click the mouse on the camera position (blue square) and change the position.

Step 7:

Render animation

© Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

Set first camera posi-

Play animation forwards.

PART 1: GET STARTED IN 5 MINUTES

18/81

Step 8: Select format, resolution and codec Step 9: Select file name and location for saving file When an animation is set up, a time axis appears at the bottom of the picture showing each individual camera position with a triangle and a line. The duration of a new animation is 30 seconds on the basic setting. This can be changed in the properties for the animation.

Fig. 18 Animation bar If the time axis controller is moved with the Shift key pressed, the preview in Fig. 18 will be played manually. A camera position selected on the time axis (the position is given a red marking) can be shifted along the time axis by moving the controller while keeping the Ctrl key pressed. If the Ctrl key and Shift key are pressed simultaneously, the marked camera position and all those after it will be moved along the time axis. The functions of the different pictures are set out in the following table. Set up an animation Render an animation

Set a camera position Delete a camera position Jump to previous camera position

Ctrl + Alt + 

Jump to previous picture

Ctrl + Shift + 

Play animation backwards

Ctrl + 

Stop animation

Ctrl +  or Ctrl + 

Play animation forwards

Ctrl + 

Jump to next picture

Ctrl + Shift + 

Jump to next camera position

Ctrl + Alt + 

© Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

PART 1: GET STARTED IN 5 MINUTES

19/81

Useful key shortcuts: To ensure that the observer height can be maintained when the different camera positions are set, a useful key shortcut has been introduced for operation via the mouse and the keyboard. As long as you keep the Alt key pressed, the observer height will be maintained. Maintain the observer height when moving and rotating in the 3D view.

Alt

 Note: It is not possible to continue with a rendering process that has been interrupted. The film is not saved in the Relux project file but in a separate file. Uncalculated and calculated scenes can be rendered by the radiosity method. Raytracing scenes are not taken into .

© Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

PART 1: GET STARTED IN 5 MINUTES

20/81

3.8 New, GR and TI glare rating outdoors The glare rating in outdoor projects has been extended in the calculation manager. Under the Artificial light calculation, and the Glare rating tab, it is now possible to calculate new GR and TI values for several observers.

Fig. 19 Calculation manager dia addition to the determination of GR values for sports grounds, the glare can also be calculated for other outdoor applications. It is possible to define individual observer points or groups.

Fig. 20 3D View of an outdoor project

Fig. 21 GR Observer points

© Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

PART 1: GET STARTED IN 5 MINUTES

21/81

In addition, there are ready-prepared observer grids for the calculation of the GR and TI values. The first grid was compiled for engers on the platform and the train conductor in accordance with the guidelines applied by the German Railway (DB).

Fig. 22 3D View of the platform

Fig. 23 GR values for the observer points for railway engers and TI values for the observer points for the train conductor.

Note: The surrounding luminances used for the calculation of GR and TI are estab-

lished by the approximation method described in CIE 112. Contrary to the ReluxStreet module where the luminance is established from directed reflections (r-tables), diffuse reflection is assumed for general outdoor projects.

© Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

PART 2: ENHANCED FEATURES FOR ADVANCED S 22/81

4 PART 2: ENHANCED FEATURES FOR ADVANCED S 4.1 Move or rotate objects in a new way General: moving and rotating objects works consistently in the same way in both the floor plan and the 3D view. These commands have been refined for the movement or rotation of objects in the 3D view as of ReluxPro 2006.

Fig. 24: shows a selected cube in a scene

Fig. 25 selected cube with activated handle

Fig. 26 cube with the active handle moved 0.5 m in z-direction. Basic operation “move” and “rotate” in the toolbar. Just click to an object in your current scene to select it (Fig. 24). © Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

PART 2: ENHANCED FEATURES FOR ADVANCED S 23/81 As soon as the mouse pointer approaches the coordinate system (the x, y and z-axis as well as the square areas between the axes), its initial color changes to yellow. (Fig. 25). The color of the handle will change from yellow to orange and you can move the object around without keeping the left mouse button pressed (Fig. 26). Press „Esc“ to leave this command. The advantages are follows: The movements of objects are more convenient without keeping the left mouse button pressed. During this movement operation of objects it is possible to change settings such as the placing grid, etc. An operation can started in one window (e.g. floor plan) and it can be finished in another window (e.g. 3D view). The viewpoint can be changed during this operation (you can rotate, pan and zoom the view). Move, rotate and scale are the most important operations for constructing a scene. You will find them in the menu bar under “Tools“ and in the toolbar. They all have special handles and a specific mouse pointer which you can see in Fig. 27. From left to right: move object, rotate object, scale object.

Fig. 27 handles and cursors for some operations (photomontage). From left to right: move object, rotate object, scale object.

© Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

PART 2: ENHANCED FEATURES FOR ADVANCED S 24/81

4.2 Move and rotate working plane The working plane can be moved and rotated like any other object in the scene. You can start these operations with the menu Tools - working plane. From here, choose either move or rotate. The handles, which you see afterwards, belong to the working plane (Fig. 28 - Fig. 30).

Fig. 28 original position

Fig. 29 new position

Fig. 30 after rotation

© Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

PART 2: ENHANCED FEATURES FOR ADVANCED S 25/81

4.3 Edit and draw objects in the 3D view The rotated working plane can now be used for drawing an object for instance a staircase. After setting an appropriate placing grid - use the ”raster properties“ icon - start with the design of a staircase using the command “draw a cube with the mouse“.

Fig. 31 draw object in 3D view Each mouse click on your working plane creates a new point. After you have defined the last point, terminate with “return” or double click the last point. To exit the edit mode, press “ESC“.

Note: during the “draw cube with the mouse“ command, you can undo wrong

entries with “backspace”. Enter your input with “return” or double-click the last point.

© Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

PART 2: ENHANCED FEATURES FOR ADVANCED S 26/81

4.4 Align objects to external walls Move an object onto an rectangular wall and see how the object turns among its lengthwise axis so that it is always parallel to the wall (Fig. 32).

Fig. 32 Align objects to external walls If you want to repeat this command, please select the object and after you have moved the mouse pointer to the small black cube of the coordinate system its initial color changes to yellow. Keep the left mouse button pressed and align the object to an external wall of your choice (Fig. 33 - Fig. 35).

Fig. 33 Selected object

Fig. 34 click the black cube: its initial color changes to yellow.

© Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

PART 2: ENHANCED FEATURES FOR ADVANCED S 27/81

Fig. 35 Keep the left mouse button pressed and align the object Whether the object turns the right way or not will depend on where the origin point and the object axis of the object are defined. Click on the object, press the right mouse button and select “Use object axis”. If the zero point is on the rear side and the Y-axis is parallel to that part of the object, as it should be, then there will be no problem.

Fig. 36 object axis related to the scene

Fig. 37 press the right mouse button

Fig. 38 and select “Use object axis” © Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

PART 2: ENHANCED FEATURES FOR ADVANCED S 28/81 Note: The automatic object rotation works for all objects in 2D and 3D. You can move objects along rectangular external walls using the object axis. 4.5 Modification of insertion points From now on it is very convenient to change the insert point of 3D objects. Therefore select an object (except manufacturer’s 3D luminaires, or 3D furniture), open the context menu via right mouse click and select the option “edit insertion point”. Another option is to select the same command from the fly out menu “Tools”.

Fig. 39 select the object of your choice and click the right mouse button 4.6 Multiple insert function If you want to insert an object into your scene from the objects and control you have two options: Use the drag and drop function to insert an object from the objects and control into your scene as usual (since Version 2006-1). Click once on the object of your choice in the objects and control . Now you’ve entered the multiple insert function mode. You can click onto the 3D view as well as the floor plan as often as you wish to insert the object. Exit this command with “ESC”.

© Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

PART 2: ENHANCED FEATURES FOR ADVANCED S 29/81

Fig. 40 “objects and control ” and multiple insert function mode 4.7 Placing grid/ raster snap There are two different snap functionalities. The first is for a typical Relux scene, and the second for imported CAD drawings. Here we will consider the typical Relux scene (for CAD snap mode please see capture „CAD Import“). The icons in the toolbar are: switch the view of the snap grid on and off. snap onto the crossing points (standard). raster properties: change the grid size, snap into the center, etc. snap into the center (you’ll find it in the menu raster properties). The center snap option in the menu raster properties is very helpful for recessed mounted luminaires in particular ceiling systems. You can use the above-mentioned icon for this. To change for instance the grid size, open “Raster properties” menu.

© Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

PART 2: ENHANCED FEATURES FOR ADVANCED S 30/81

Fig. 41 Zentriertes Zeichenraster im Grundriss 4.8 Move and scale room elements From now on room elements, such as windows, doors and Fig.s, can be selected directly on the wall and moved afterwards (Fig. 42).

Fig. 42 Their size can be changed as well (Fig. 43).

Fig. 43 To change a dimension, click on the red point and move the mouse. To move the wall element, use an axis (X, or Y) or the square area between the X- and Y-axes, like all Relux Objects. © Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

PART 2: ENHANCED FEATURES FOR ADVANCED S 31/81 If you would like to move the wall element from one wall to another wall, click on the black cube and press the left mouse button while moving it. 4.9 Draw polygonal scenes (interior, exterior) Define a new interior project, or add a new room to the your project. Choose a polygonal room shape (Fig. 44). After that dialog, you will be in the 2D edit mode, where you can define the room shape and the length of each wall (Fig. 45). You can end this 2D edit mode with a double click either or the „ENTER“ key. A new menu opens and you can extrude your scene either to the Z-, or X-Axis (Fig. 46). This procedure works also for exterior projects (without extrusion of the walls) Diese Möglichkeit erlaubt es sowohl Räume aus einem Grundriss heraus, wie auch aus einem Schnitt zu konstruieren. Dieser Vorgang funktioniert sowohl für Innenräume als auch für Außenprojekte (dort entfällt das Extrudieren der Wände). Example 1: extrude scene to Z-axis

Fig. 44 selection of room type

© Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

PART 2: ENHANCED FEATURES FOR ADVANCED S 32/81 Fig. 45 2D edit mode

Fig. 46 set direction of extrusion (Fig. 44- Fig. 46) If you want to add or remove corner points, select the scene and find command “Corner point insert” in the fly out menu under “Tools“, or in the following toolbar Fig. 47.

Fig. 47

Fig. 48: from left to right: Click on corner point to move it, click on the blue line between two corner points to add new point.

Note: During the drawing command, you can change the snap grids or use zoom functionalities. The backspace key will remove the last corner point.

Example 2: extrude scene to X-axis Define a new interior project, or add a new room to the your project. Choose a polygonal room shape. After that dialog, you will be in the 2D edit mode, where you can define the sectional room shape and the height of each wall. You can end this 2D edit mode with a double click either or the „ENTER“ key. A new menu opens and you can extrude your scene either to the X-Axis.

© Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

PART 2: ENHANCED FEATURES FOR ADVANCED S 33/81

Fig. 49: selection of room type

Fig. 50 2D edit mode

Fig. 51 set direction of extrusion

© Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

PART 2: ENHANCED FEATURES FOR ADVANCED S 34/81

Fig. 52 Radiosity rendering

Fig. 53 Raytracing rendering

© Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

PART 2: ENHANCED FEATURES FOR ADVANCED S 35/81

4.10 CAD import with ReluxPro There are two ways to import CAD files. Option one is to construct a CAD scene from a CAD plan. The second option is to import CAD drawings into existing scenes, see File-Import-CAD Plan. Example 1: construct scene from CAD plan)

Fig. 54 CAD import General: The new powerful CAD interface allows to import all dwg, or dxf files within a few steps. Just start ReluxPro and try the assistant CAD import. Follow the 7 steps to import a CAD file: step 1: enter project data step 2: select a file (dwg, or dxf) step 3: define layers to be turned on, or off step 4: define drawing units (usual 1000/m for interior projects and 1/m exterior projects) step 4: set rotation (requires knowledge of the drawing, otherwise proceed to step 6) step 5: set origin (requires knowledge of the drawing, otherwise proceed to step 7) step 7: draw scene (interior, or exterior)

© Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

PART 2: ENHANCED FEATURES FOR ADVANCED S 36/81

Fig. 55 select CAD file: dwg, oder dxf

Fig. 56 switch on or off the CAD layers

Fig. 57 set position

© Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

PART 2: ENHANCED FEATURES FOR ADVANCED S 37/81

Fig. 58 set drawing unites

Fig. 59 rotate drawing

Note: In the ReluxSuite program directory (..\Program Files\ReluxSuite\examples) you will find some example CAD drawings.

After step 5 you will reach the “Floor Plan” where you can select all corner points of your scene. For efficient use we suggest to use the CAD snap mode (please refer to tool bar CAD snap mode(Fig. 60).

Fig. 60: CAD snap mode

© Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

PART 2: ENHANCED FEATURES FOR ADVANCED S 38/81

Fig. 61 draw scene (interior)

Fig. 62 set direction of extrusion

Fig. 63 set scene type © Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

PART 2: ENHANCED FEATURES FOR ADVANCED S 39/81 With a double click on your scene you will open a new menu, where you can set the type of your scene (interior, or exterior) as well as the direction of extrusion in the following menu (Fig. 63). After this step the scene is completed.

Fig. 64 3D View There are icons and a dialog box for working with CAD drawings: Icon for the “Properties” dialog. Icon for switching on/off the snap mode for CAD drawings. Tool bar CAD snap mode (below). Icon turns drawing on or off, like a layer “Show CAD plan”.

Fig. 65 CAD icons and tool bar “CAD snap mode”

© Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

PART 2: ENHANCED FEATURES FOR ADVANCED S 40/81

Fig. 66 Plan properties

Note: If you wish to, you can add additional scenes to your imported CAD drawing with a click on the button „draw scene“ (tool bar “Tools”).

© Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

PART 2: ENHANCED FEATURES FOR ADVANCED S 41/81

Example 2: add a second CAD drawing to your scene A scene in your Relux Project can contain more than one CAD drawing: for example a floor plan and a section. Therefore please move your mouse pointer to „Wall 1“ in the tab „Scene“ and click with your right mouse button. The context menu opens. Please select „Assign working plane“ (Fig. 67). After this step you can turn the working plane around 180°.“

Fig. 67

Note: The origin of a working plane for walls lies always in the left hand corner as in Fig. 72 (view from inside the room).

Open the menu “Raster properties” and set an appropriate placing grid for the following steps (0,1m). The next step is the import of a second CAD section to our scene. Select „File – Import – CAD Plan“ and follow next steps as before. In the ReluxSuite program directory (..\Program Files\ReluxSuite\examples) you will find some example CAD drawings (Profile-UG-EFH.dwg).

Fig. 68 select a file

© Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

PART 2: ENHANCED FEATURES FOR ADVANCED S 42/81

Fig. 69 define drawing unites Set the origin point and click the button “Determine”. Just click to the origin and after a successful import you should see the drawing as follows.

Fig. 70 define origin

Fig. 71 3D View

© Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

PART 2: ENHANCED FEATURES FOR ADVANCED S 43/81

Example 3: building with several floors In example 1 and 2 we have shown single scenes projects. But it is also possible to construct a whole building. Please refer to our prepared building and open “example3.rdf“.

Fig. 72 Building

1. extrudes a cube based on CAD drawing vectors, or curves. 2. extrudes a cube based on CAD drawing vectors, or curves. 3. extrudes a working surface based on CAD drawing vectors. 4. extrudes a wall based on CAD drawing vectors. Default thickness is 10cm. 5. creates a virtual measuring area based on CAD drawing vectors. 6. creates a new escape route area based on CAD drawing vectors. 7. creates a new escape route based on CAD drawing vectors. 8. creates a new scene (interior, or exterior) based on CAD drawing vectors.

© Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

PART 2: ENHANCED FEATURES FOR ADVANCED S 44/81 Note: For an indoor lighting design, we recommend that the design be performed

for each floor, or individual room, instead of rebuilding the entire scenery in a single scene. As you can see, however, there are many different possibilities.

4.11 New ReluxMovie Module

4.11.1

Introduction

Films can be generated in a particularly easy manner with the animation module in ReluxPro. For this, you simply require the “Animation” toolbar and the animation bar. You can have these displayed or hidden via the Window-Animation Bar and Window-Symbol Bar-Animation menus. The procedure for compiling an animation has already been described in the “New ReluxMovie Module” section, which is why we are now setting out the details of these new options.

4.11.2

Animation bar

Fig. 73: “Animation” toolbar

© Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

PART 2: ENHANCED FEATURES FOR ADVANCED S 45/81 When a new camera position is set, the position of the camera on the time axis is established automatically on the basis of the specified speed. The positions are shown on the time axis with the

symbol.

The positions on the time axis can be changed manually. To do this, you should move the controller (black bar), either with the mouse or with the close to a camera position

command, until it is

and this changes its colour to red.

Keeping the Ctrl key and the left mouse button pressed in the black area, you can now move the camera position on the time axis. If you additionally press Shift, all the subsequent camera positions will similarly be moved. A new camera position on the time axis will overwrite an existing camera position. The duration of an animation is automatically set at 30 seconds. This can be changed in the properties of the animation in question. There are two ways of showing the time: the number of pictures (1 B., 2 B., …) or in hours, minutes and seconds (hh:mm:ss:ff, SMPTE timecode). The setting for this can be made under the Extras – Options – General Settings menu, under the Animation units in SMPTE Timecode option. 4.11.3

Maintaining the observer height

In order to maintain the observer height when the different camera positions are set, a useful key shortcut has been introduced for operation via the mouse and the keyboard. As long as you keep the Alt key pressed, the current observer height will be maintained. Maintaining the observer height when moving and rotating in the 3D View.

4.11.4

Alt

Animation path

In the 2D and 3D View, the trajectory of the camera between the individual camera positions is shown as a dotted blue/orange path. Each section of line represents a picture. In the Floor Plan View and all other 3D Views, the camera travels along this path when the animation is played. By clicking on the path, the individual camera positions are shown as blue squares. These squares can be selected and the camera position changed or deleted. An animation path of this type can be copied, moved and rotated in the same way as an object.

© Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

PART 2: ENHANCED FEATURES FOR ADVANCED S 46/81

Fig. 74 Animation path 4.11.5

Multiple animation paths

The program allows more than one animation to be conducted within a scene. When you click on one of the camera positions (blue squares) in the 3D View, Relux shows one or other of the animation paths in the “Animation” toolbar. The 3D camera symbol is shown in red if the associated animation is active. For nonactive animations, the 3D camera symbols are shown with blue lines. These are red if the animation is active. 4.11.6

Interpolation

Between the camera positions, the path that the camera follows is set automatically. By way of a default, the Akima interpolation is used for the path. This interpolation can also be switched. To do this, select one of the three interpolation functions in the context menu for the animation node in the scene tree: Linear:

Fig. 75 Linear interpolation

© Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

PART 2: ENHANCED FEATURES FOR ADVANCED S 47/81 The simplest type of interpolation. This connects points by means of a line. The values between the points are established on a linear basis. This generally causes a jolt at the point where the photo is taken. Cubic:

Fig. 76 Cubic interpolation This interpolation leads to a soft curve between the points. It guarantees a smooth and jolt-free profile. There can, however, be considerable deviations from the direct link between the photo points. Akima:

Fig. 77 Akima interpolation This interpolation type similarly creates a soft curve between the points. The Akima curve remains closer to the direct link, however, than the cubic interpolation. 4.11.7

Stretch-compress animation

If you have compiled an animation and wish to compress or lengthen the playing speed of a film, you can select the Stretch-compress function in the context menu for the animation. In the subsequent dialog, you can specify the length in seconds to which the animation is to be stretched or compressed. The animation cannot be compressed so far that the individual photo points overlap (Fig. 78).

Fig. 78 Stretch animation © Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

PART 2: ENHANCED FEATURES FOR ADVANCED S 48/81

4.11.8

Animation properties

By double-clicking on the animation node in the project tree or clicking on the Animation toolbar, you can call up the property window for this animation. The following settings can be made via the dialog (5):

Fig. 79 Animation settings Frame rate: defines the number of frames per second of film. Time axis: defines the range that is shown in the animation axis; this can be specified by setting the time to be shown in seconds or the number of pictures. 4.11.9

Rendering the animation

An animation path must be rendered beforehand for the film to be obtained. To do icon with the film slate-board in the toolbar or select the Extras this, select the – render animation option. The following dialog can be used to make settings for the format and resolution (Fig. 80, Render settings).

Fig. 80 Render settings Output type: here the determines the output type with which the film is to be generated. It is possible to choose between “Uncalculated”, i.e. the normal 3D View, or “Luminance distribution” i.e. the calculated 3D View. At the moment, calculated radiosity scenes can be rendered by this method but not raytracing scenes.

© Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

PART 2: ENHANCED FEATURES FOR ADVANCED S 49/81 Format: Defines the output format for the film. With the “AVI” option, the film is calculated in the standard format used for Windows. By clicking on Options, it is possible to select a codec that is available on the computer and also the desired compression stage. As a further option, the film can also be saved as a series of individual pictures, and it is also possible to choose between “JPEG” and “BMP”. Resolution: The most common film formats are listed in the selection box. You can also specify the film resolution that you would like via the input fields (width and height). Duration: Here you decide which part of the animation is to be saved in the film. You can choose either “All pictures” or just “Current picture”. With the input fields of “from” / ”to”, you can limit the animation to a duration that you select yourself. By clicking on “Start” you call up a dialog which asks you where the target file is to be written to. The ’s video folder is set as the default (My files/My videos). After confirming with OK, the rendering process will be started automatically (Fig. 81).

Fig. 81 Render manager The Render manager shows the following information: Number of pictures calculated / Total number of pictures Time elapsed since the start of the rendering process Time remaining until the process is completed Estimated overall time for the compilation process © Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

PART 2: ENHANCED FEATURES FOR ADVANCED S 50/81 Path for the film being calculated The checkbox can be used to show or switch off a preview. The preview shows which individual pictures are being written to the film. The process can be stopped at any time in order to eliminate any setting errors. If the film is to be shown in the Standard Player once the rendering is complete, the “Open after calculation” box must be checked.

Note: It is not possible to continue a rendering process that has been interrupted. The film is not saved in the Relux project file but in a separate file.

© Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

PART 2: ENHANCED FEATURES FOR ADVANCED S 51/81

4.12 New GR and TI glare rating for outdoors The glare rating in outdoor projects has been extended in the Calculation manager. Under Artificial light and the Glare rating tab, new GR and TI glare ratings can be calculated for observers. The following description explicitly covers the verification required by the German Railway (DB) for overground platforms.

Fig. 82 Calculation manager dialog

4.12.1

What is calculated?

The direct light from each individual luminaire is calculated at each observer point. This value, set out as a ratio to the surrounding luminance, gives the GR or TI value. The surrounding luminance value is obtained as a function of the defined measurement area, referred to as the reference value. Although this is an approximation, CIE 112 stipulates that it is a permitted approximation. GR values stand for stationary observer points and TI values for travelling or moving observer points. © Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

PART 2: ENHANCED FEATURES FOR ADVANCED S 52/81

4.12.2

Measuring area and observers

See Point 1, Fig. 83. To calculate the GR value and the TI values, the program requires a Reference area for establishing the surrounding luminances. The Reference area must be allocated a mean Reflectance of the real area that is positioned underneath it. The program looks for this reflectance automatically. This procedure, as described, makes it possible to establish GR / TI for any desired scenes and at different levels.

Note: Try to avoid dissimilar reflections beneath reference surfaces if possible. If

the reflectance of these real surfaces (e.g. the floor) changes, it may be necessary to adjust the reflectance of the reference surface.

2 1

Fig. 83 Measurement or reference area See the above Figure. The observer points arranged like a table represent the waiting engers next to the railway lines; the observer points arranged in a row represent the conductor of the train that is arriving. The position and size of the reference area ought always to be selected to suit the requirements (sports ground, station platform...). In the picture above you can see the reference area shown in red. Care was taken to ensure that this is lined up in parallel beneath a repeated pattern of positioned luminaires. The program positions a group of 5x5 observers uniformly in front of the reference area for calculating the GR values. The observer points for the vehicle driver are positioned in parallel to the reference surface. The first observer point is at an angle of 20° prior to the first luminaire above © Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

PART 2: ENHANCED FEATURES FOR ADVANCED S 53/81 the reference surface. In the transverse direction, it is placed 1.66m alongside the left edge of the measurement field (platform edge). The number of steps and the distance between them is governed by the length of the measuring surface and the number of measuring points set. The basic parameters are set in accordance with the German Railway (DB) Guidelines. All the parameters can be adjusted as required.

Note: The observer points are not updated automatically. If the observers have to

be realigned due to changes in the luminaire positions or the alignment of the measurement surface, you must trigger the automatic positioning of the observer points manually. To do this, go to the Calculation Manager and start DB Guidelines again.

Please note that when GR and TI values are determined for outdoors, all the light reflections are calculated as in the past, but, according to the method proposed in CIE 112 for determining the mean background luminance, only the reference surface is taken into . A bright white wall direct in the observer’s field of vision thus only has an indirect influence on the mean background luminance. As a result, the calculated GR and TI values tend to be too high (see CIE112). On the other hand, it is not necessary to recreate every 3D detail in outdoor projects.

© Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

PART 2: ENHANCED FEATURES FOR ADVANCED S 54/81

4.13 Raytracing calculation in Relux Pro 4.13.1

How to use the Relux raytracing calculation

Fig. 84

Fig. 85 The raytracing calculation is based on a version of Radiance that has been revised by Relux. This verified method, which has been validated worldwide, is noted for its accurate calculation results. A ray tracer is a complex tool with many adjustable parameters which need to be set by the . To use the raytracing calculation just open the calculation manager of ReluxPro.

Note: The following chapter provides a short introduction into the use of this

calculation method. For more detailed information please refer to our newly completed guide "Radiance calculation with ReluxPro ". You will find this additional guide either on our ReluxSuite DVD, or on our web-site www.relux.biz. Relux Raytracer offers two modes for doing calculations: in the standard mode the most important parameters are set automatically depending on the chosen quality setting, only the number of diffuse interreflexions can be specified separately. For usual scenes these automatic settings deliver already very good results within acceptable calculation times. For specific demands Relux Raytracer additionally offers an expert mode, which allows to control the program execution separately for the different individual tasks of a lighting simulation like the direct or indirect part of the illumination calculation, or special adjustments for daylight scenes, etckann.

Note: Both modes are independent. This for example offers the option of setting

low quality values in the standard mode for quick preview renderings in the chosen

© Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

PART 2: ENHANCED FEATURES FOR ADVANCED S 55/81 image format and at the same time setting high quality values in the expert mode dialog. Afterwards, one can easily switch between the two ways by simply activating / deactivating the expert mode.

Fig. 86 ReluxPro raytracing calculation

© Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

PART 2: ENHANCED FEATURES FOR ADVANCED S 56/81

4.13.2

The Standard mode parameters

The preparations for a visualization with the "Raytracing calculation" encomes the same steps as those for a light standard calculations in "ReluxPro " (Fig. 87). 1. Create a new project or add a new scene to your current project 2. Develop the layout of the room with e.g. furniture and wall materials 3. For artificial light calculations: select and position the luminaires of your choice and for daylight calculations: select and position at least one window or a skylight

Fig. 87 Calculation manager (Standard mode) Once the layout of the scene has been completed, you can go further and open the calculation manager. Further inputs are required here, in the same way as for the standard light calculations. The calculation manager incorporates a switch box to activate the Radiance parameters. Let us first cover the standard settings, starting with the type of calculation: : Type of lighting Artificial light

Only luminaires are calculated as light sources Windows are depicted as black surface (night).

Daylight Only

The light coming through windows and skylights is calculated.

© Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

PART 2: ENHANCED FEATURES FOR ADVANCED S 57/81 Artificial light and daylight

All artificial light sources and daylight are taken into .

As next you’ll find the settings for the daylight calculations with the different sky conditions, together with the date and true local time. The time is converted and also shown as so-called "true solar time (TST)" using the date and the longitude entered in "Project Location". This essentially determines the position of the sun and therefore the luminance distribution of the sky. If requested you can set the switch button "with sun" to calculate the effect of direct sunlight as well. Sky type Clear sky according to CIE

Only the radiation of the sky is taken into , without the radiation due to the sun. CIE Publication No. 22 of 1973

Intermediate sky according to CIE

A partially overcast sky with the components of overcast and clear sky being determined on the basis of the sun probability and additional weighting factors. CIE Publication No. 22 of 1973

Overcast sky to CIE

The CIE defines an overcast sky with an uneven light distribution here, deviating slightly from DIN 5034 Part 2. CIE Publication No. 22 of 1973

Uniformly overcast sky

This sky type has been described in DIN 5034 Part 2 with a specific luminance for all directions, i.e. determined solely by the angle of the point in the sky to the zenith.

In the standard mode you can set as well the Fig. quality as well the number of „Inter-reflections“ are additionally taken into . The best possible quality of renderings is achieved with „high“. In the Expert mode, a lot more settings are additionally available. This document contains only a summary.

Note: For more detailed information please refer to our newly completed guide

"Radiance calculation with ReluxPro ". You will find this additional guide either on our ReluxSuite DVD, or on our web-site www.relux.biz.

© Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

PART 2: ENHANCED FEATURES FOR ADVANCED S 58/81 4.13.3

The Expert mode parameters

Fig. 88

Fig. 89 Expert mode The justification of several parameters is the aim to provide the possibility of adjustment for all kinds of specific scenarios. In general, dependent on the project, only a few of the values need to be changed by the . In the following, some guidelines are given to provide you with the necessary background for performing the task of adequate parameter adjustment.

Note: the opportunity of individual parameter settings is both a convenience and a

challenge. Consistency of the value settings is of course vital. If, e.g., a high image quality is chosen and at the same time an insufficient spatial resolution for the indirect light calculation is set, the results will likely be not satisfying.

© Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

PART 2: ENHANCED FEATURES FOR ADVANCED S 59/81 Scene geometry: Parameters in this category in general don't need a interference, they are only provided for very exceptional cases in which problems with the geometry export show up. For the ray tracing process the scene data are converted into a special structure (octree). The scene is divided subsequently into cubes and sub cubes to provide information about which parts of the overall volume are occupied by objects and which not. An important criterion for this conversion process is of course the ratio of smallest appearing geometry size to the overall scene size. The underlying algorithm however is already capable of handling a wide range of these geometry ratios, so normally the octree resolution doesn't need to be changed. Only in cases in which huge scenes also contain a lot of small geometry detail, especially if this detail appears locally concentrated, it might be necessary to augment this value (e.g. from 16000 to 32000). A further geometry-specific adjustment possibility affects the way in which the objects are stored internally. Given the fact that usually scenes are growing more complex with each year, Relux Raytracer by default allocates all objects in a highly compressed data structure. Thus scenes can be rendered now with the new version which would be an impossible task for previous Relux Raytracer versions. Usually, this memory optimization also doesn't need to be changed by the . (For simple scenes deactivating can save around 10 % of the calculation time) Image Quality: For convenience, even in the expert mode some parameters are still subsumed under the category image quality. Apart from some internal calculation parameters this value also controls the over sampling rate and the image filtering, which is applied to smoothen rough borders and pixel effects in the final image. Direct Illumination:Concerning the direct part of the overall illumination calculation, presently the options soft shadows and the connected value of the source subdiRelux Raytraceramount are adjustable by the . For a realistic image appearance, the soft shadows option should remain activated. The subdiRelux Raytracerparameter then determines how soft the shadows are rendered. Of course a higher amount of subdiRelux Raytracerunfortunately also results in an increase of the necessary calculation time Indirect Illumination: Calculating the indirect part of the illumination is undoubtedly the most complex task of a visualization. Within Radiance, the indirect illumination is also simulated with a ray tracing process, but in contrast to the simple direct ray tracing method, in this case rays are sent out not only from the observers point of view, but also from various points within the whole scene. These indirect rays sample the (indirect) illumination reaching the point in consideration from the whole hemisphere above it. One additionally takes advantage of the fact that the indirect illumination varies much less strongly compared to the direct part. Thus it is possible to cache values from the calculation and reuse them for points in the vicinity to a certain amount (interpolation method). This general approach demands a set of specific parameters, of which the four most important ones can be set in Relux Raytracer: The number of interreflexions, i.e. up to which depth indirect interreflexions are followed, the spatial resolution used for the calculation and interpolation process, the number of indirect rays which are sent out to sample the surrounding hemisphere, and finally a value for the background ambient illumination, which serves to simulate the part of the illumination which is not considered due to the fact that only a finite number of indirect interreflexions are traced. © Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

PART 2: ENHANCED FEATURES FOR ADVANCED S 60/81 Theoretically, an infinite amount of interreflexions needs to be considered to simulate the light flux exchange between the scene surfaces in a physically exact manner. To limit calculation times especially for visualizations, one can work with few interreflexions and simulate the rest with an ambient background light. In this case, for the practical application, 2-3 interreflexions are recommended for usual scenes. Take for example a simple indirect illumination scenario. With 1 interreflexion, the path luminaire -> ceiling -> workplane is sampled, with 2 interreflexions additional paths like luminaire -> ceiling -> walls -> workplane can be considered. The ambient illumination is scene dependent in general, its advisable to make some previews to find out suitable values for typical scenarios. Higher values for the number of interreflexions (3-5) are recommended for scenes with mostly indirect illumination, or if a high calculation accuracy is needed. More than 7-9 interreflexions are generally not advisable, the sampled contributions decrease quickly with higher iteration levels and in the end fall below the general error of the applied stochastic ray tracing method. (clearly, one should reduce the ambient light accordingly when using such a high number of interreflexions, or set it completely zero, in order to avoid erroneously adding light to the scene.) Of course the number of indirect interreflexions has a high influence on the amount of calculation time. For quick preview runs the indirect calculation can be switched off completely (0 interreflexions). Keep in mind that then all surfaces which are not illuminated by a light source directly are rendered unnaturally dark. The necessary spatial resolution is a critical parameter which is very much a function of the scene geometry and leads to artefacts in the image if set to inadequate values. The default value of 0.4 m is already a relatively coarse setting to keep calculation times to within reasonable limits. Scenes with a high illumination variance and/or fine detail might need a finer setting (such as 0.2 or, in extreme cases, as low as 0.1 or 0.05). It should be noted that this, unfortunately, rapidly leads to a considerably higher calculation time. On the other hand, with artificially illuminated exterior areas, for instance, where the indirect component part plays a more minor role, the value can often be increased (to between 0.6 and 1.0 m, for example) without immediately causing image artefacts. The pronounced dependence on the scene geometry and the illumination configuration make it difficult to provide any further general advice. Given the major influence on calculation time, however, it is generally advisable to experiment with different settings. The number of indirect rays is set to a default value which is adequate for standard scene types (please consult the following chart). What has been said above, however, similarly applies here – a large amount of scene detail and a high illumination variance could necessitate an adjustment (to between 800 and 1000, or more) in order to make sure that all the surrounding details are correctly sampled. With more or less empty scenes and fairly uniform illumination, the value can safely be reduced (to between 300 and 500, or less). The influence on the calculation time is less pronounced than for the spatial resolution parameter (although 1000 rays might sound a great deal, they still only permit a rather coarse sampling of the surrounding objects). Experimenting with different settings is recommended, too. Hence, in the case of scenes that require a fine spatial resolution on of extensive geometry detail, but which also have only a low illumination variance, it may make sense to reduce the number of indirect rays so as to keep the calculation times within reasonable limits. Simple scene (artificial and/or daylight with precalculation of daylight openings, such as windows; good, uniform light) © Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

800 – 1200

PART 2: ENHANCED FEATURES FOR ADVANCED S 61/81 More complex scenes (more details; highly varied illumination through the use of narrow beam spots und/or direct sunlight)

1500 – 3000

Calculation of daylight without the precalculation of daylight openings such as windows

3000 – 5000

Daylight calculations are generally more challenging, because of the greater variance of the illumination (by comparison to artificially lit scenes). Another difficulty is that the sky hemisphere cannot be treated as a localized light emitter in the same way as a normal luminaire. For this reason, the sky portion of the illumination is evaluated using the indirect light process in Radiance. (By contrast to the sun itself, which similarly cannot be localized, because of its great distance, but which can easily be simulated as an angular light source with a source angle of approximately 0.5°). To accurately simulate the illumination through daylight openings, it is recommended that a precalculation be run for all the openings (windows and skylights). Each daylight opening is treated separately, and a luminous intensity distribution is generated which describes the angular dependence of the incoming daylight, making allowance for the chosen sky model and all the external obstructions (if modeled). It is, of course, necessary for the level of the external interreflections to be correctly specified. The default (and minimum) value of 1 for the interreflection only takes the sky itself into consideration. All the geometry objects outside the room act as pure obstructions. With 2 or more interreflections, it is possible to additionally consider the amount of light (from the sun and the sky) which is reflected by external objects. The precalculation routine thus converts daylight openings into localized light sources, making for a more accurate calculation by comparison to a simulation that uses the indirect algorithm for simulating the room as a whole. These localized sources can, however, produce disturbing highlights in conjunction with reflecting surfaces when images are generated. It is thus possible for this precalculation to be switched off. In this case, it is recommended that the number of interreflections be increased to 3-5 or more (both the interreflections within the room and those outside it must now be considered together). The number of indirect rays can perhaps also be increased (e.g. to 800-1000 or more). Switching off the window precalculation can also make sense for scenes with very large daylight openings, e.g. rooms with large window sections that cover entire walls from the floor to the ceiling.

© Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

PART 2: ENHANCED FEATURES FOR ADVANCED S 62/81 4.13.4

Set up a viewpoint

Fig. 90 Views The "Views" dialog page (Fig. 90) has been included to allow a viewpoint to be set up for the raytracing calculation. It also offers facilities for defining additional views and entering the settings for the size of the visualizations. A preview button is provided for the creation of previews.. 4.13.5

Raster measuring areas and start of calculation

The Relux raytracing module has a "Raster measuring areas" dialog (Fig. 80) for calculating luminances or illuminances. This dialog is used in the same way as in ReluxPro calculations. The measuring surfaces contained in the project are listed in the dialog, and the basic settings are shown for the number of points in the X and Y direction, together with the corresponding intervals between the points. Pressing the '...' button will activate the extended dialog for selecting the additional "vertical illuminances".

© Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

PART 2: ENHANCED FEATURES FOR ADVANCED S 63/81

Fig. 91 Berechnungsmanager (Rastermessflächen)

© Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

PART 2: ENHANCED FEATURES FOR ADVANCED S 64/81

4.14 ReluxEnergy ReluxEnergy is a powerful free-of-charge module for calculating the energy consumption of interior lighting in non-residential buildings. It is based on energy standards, such as EN 15193 and DIN 18599-4 (SIA380/4 & CTE HE-3 will be following in May 2009). General information: ReluxPro data files can be imported into the ReluxEnergy program. Once the files have been imported, you then add the extra details regarding consumption and the information that is required by the standards. Changes which are made in ReluxPro data files will automatically be transferred to the ReluxEnergy project as long as you do not move or delete these reference data files.

Note: An overview of the total energy consumption will be provided on the basis of the EN 15193 energy standard. No recommendations are given regarding the maximum overall energy consumption per year at the moment, since there are no recommendations contained in the standard.

An overview is also available for the DIN 18599-4 energy standard, together with a "stop" light which provides direct on whether the DIN standards have been attained or not. In addition to this, ReluxEnergy provides you with the total maximum permitted energy consumption per year, as well as the current energy consumption. The graphic interface for ReluxEnergy

Fig. 92: GUI of Relux Energy

© Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

PART 2: ENHANCED FEATURES FOR ADVANCED S 65/81 Note: To achieve meaningful results, it is necessary to have a basic knowledge of

the energy standards, including EN 15193 and DIN 18599-4, when using ReluxEnergy. Relux Informatik AG and their partners in Europe offer frequent training courses on this special field of light engineering. For further information please visit www.relux.biz. Use of the graphic interface is highly intuitive. It contains two different tabs. 1. Energy evaluation (see above) is divided into three sections: Scene explorer, where all the rooms and sections are listed (green outline) Settings, where the data can be entered for the building and its zones (yellow outline) Results overview, for the building, individual rooms and sections (red outline) 2. Results: This tab works in the same way as the Print manager in ReluxPro and makes it possible to organize all the project results. The following two project examples illustrate the capability of ReluxEnergy.

© Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

PART 2: ENHANCED FEATURES FOR ADVANCED S 66/81

Beispiel 1: Projekt gemäß EN15193 Open a new ReluxEnergy project with a click on the

icon, or press .

Insert one zone with a click on the icon, or press . Import ReluxPro project files with a click on the icon, or press . You can also import more than one project file and scene. An example is provided in your program installation folder at ..\Program\ReluxSuite\Examples\ReluxEnergy.rdf Select the rooms in the following menu, or just use the drag & drop function to import a room into your ReluxEnergy zone (this does not work with scenes that are extruded to the X-axis).

Fig. 93 EN 15193 Select the EN 15193 standard; for every zone, you need to select a pre-defined profile from the combo box in the “Additional settings” tab for purposes of defining the annual hours of use (Fig. 93). The energy consumption will now be calculated automatically for each room and for the project overview. Rooms that include daylight openings will influence the calculation in a different way from rooms without daylight.

Note: If you have to change the lighting design for any reason, select the room in the scene explorer and press “F6”. The room will now appear in ReluxPro and, after all the changes have been made, the results will automatically be transferred back into ReluxEnergy.

General settings for room: (Fig. 83) You can fill in how many times you wish to evaluate this room, should one and the same room occur more than once in your building (this is typically the case in office buildings).

Fig. 94 General settings © Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

PART 2: ENHANCED FEATURES FOR ADVANCED S 67/81 Additional settings for room: (Fig. 94): an average “Absence factor” of 0.2 is set as the default (This means 20%/day when the room is not in use). A light control system could significantly reduce the energy consumption. Click the “Controlled constant illuminance” switch box to enable or disable this option (it should only be enabled for use with daylight openings like windows).

Fig. 95 General settings for section: select one of the “presence control” options to enable and define this option (Fig. 96).

Fig. 96 Generelle Einstellungen

Fig. 97 zusätzliche Einstellungen You have now completed your entries and you will find the energy consumption for an individual room in the “Results” tab. Repeat the procedure (6 to 9) for each of the other rooms which have no daylight openings, such as windows.. General settings for room with daylight: (Fig. 98) You can fill in how many times you wish to evaluate this room, should one and the same room occur more than once in your building (this is typically the case in office buildings).

© Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

PART 2: ENHANCED FEATURES FOR ADVANCED S 68/81

Fig. 98 Generelle Einstellungen Additional settings for room with daylight: (Fig. 88) an average “Absence factor” of 0.2 is set as the default (This means 20%/day when the room is not in use). A light control system could significantly reduce the energy consumption. Click the “Controlled constant illuminance” switch box to enable or disable this option.

Fig. 99 zusätzliche Einstellungen General settings for section: (Fig. 100) select one of the “presence control” and “daylight depending control system” options to enable and define this option.

Fig. 100 Generelle Einstellungen Additional settings for section: (Fig. 101) if there is any additional installed power required, such as parasitic power for controls or emergency charging power, you can fill in the values here.

© Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

PART 2: ENHANCED FEATURES FOR ADVANCED S 69/81

Fig. 101 installed power The different parameters for rooflights such as “Daylight sources” and the dimensions in the “Rooflight properties” tab will be filled in automatically. Modifications should be kept within limits. You should simply select the type of rooflight (Fig. 102).

Fig. 102 rooflight properties

© Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

PART 2: ENHANCED FEATURES FOR ADVANCED S 70/81 The project-related parameters for vertical windows, such as “Window properties” and “Obstruction”, will be not be provided by either ReluxEnergy or ReluxPro . If there is an atrium or a double-glazed facade, more parameters will need to be filled in. Please refer to DIN 18599-4, where all these parameters are explained in detail.

Fig. 103 window properties

Fig. 104 obstruction Now you have completed your entries, you will find the energy consumption for an individual room in the “Results” tab. Repeat the procedure (6 to 9) for all other rooms with daylight openings, such as windows.

Note: there are several options for optimizing the power consumption of your project. Presence control Daylight dependent control systems Glare shield

Dimensions and consistency of daylight openings (ReluxPro).

© Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

PART 2: ENHANCED FEATURES FOR ADVANCED S 71/81

Example 2: project based on DIN 18599-4 General information: the use of ReluxEnergy on the basis of DIN 18599-4 is fairly similar to the procedure for EN 18593. There are, however, two key points that differ in the EN 15893 and DIN 18599-4 standards: Only the DIN 18599-10 norm contains several “utilization profiles”. These profiles include fixed parameters that cannot be changed by the . They form part of the standard.

Fig. 105 paragraph from the German DIN 18599-10 standard The consultant can evaluate the power consumption from the utilization profiles and a recommended maximum power consumption for each profile. The consultant can thus compare their planned power consumption with a reference value (for each individual zone and section).

Fig. 106 excerpt from a German energy Open a new ReluxEnergy project with a click on the icon, or press . Insert one zone with a click on the icon, or press . Import ReluxPro project files with a click on the icon, or press . You can also import more than one project file and scene. An example is provided in your program installation folder at: ..\Program\ReluxSuite\Examples\ReluxEnergy_18599_4.rdf.

© Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

PART 2: ENHANCED FEATURES FOR ADVANCED S 72/81 Select the rooms in the following menu, or just use the drag & drop function to import a room to your ReluxEnergy zone (this doesn’t work with scenes that are extruded to the X-axis). Define zones and utilization profiles: for every zone, you need to select a pre-defined utilization profile from the combo box. Follow steps 5 to 17 from the previous example (example 1) (EN 15193) in order to calculate the total power consumption (including per zone and per room) for your project.

Fig. 107 utilization profiles

Note: The utilization profiles and a recommended maximum power consumption for each profile make it possible to evaluate the power consumption. The traffic light provides an overview of your project (green traffic light = values are within recommended range; red traffic light = revise concept). There are several options for optimizing the power consumption of your project. Presence control Daylight dependent control systems Glare shield Dimensions and consistency of daylight openings (ReluxPro )

© Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

PART 2: ENHANCED FEATURES FOR ADVANCED S 73/81

4.15 Tunnel module The tunnel calculation software has been developed for experts and is based on the CIE88, CIE140 and SLG201 standards. Knowledge of these standards is necessary in order to evaluate the precise results. You must purchase a license to run this module. For further information please us via e-mail at [email protected], or by telephone on +41613330770. After your tunnel module has been activated via a hardware lock, you can start ReluxPro and select the “Tunnel“ option from the start menu. A tunnel project is controlled via the <Scene Bar> and the . If these happen to be hidden (which is unlikely), you should simply use the “Scene“ and “Tunnel“ options in the "Window“ fly-out menu to activate them.

Fig. 108 start icon for tunnel project

Fig. 109 “scene Bar” for tunnel lighting

© Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

PART 2: ENHANCED FEATURES FOR ADVANCED S 74/81 Step 1: Tunnel geometry Start ReluxPro and select the project type “Tunnel”. Fill in the basic parameters for the tunnel geometry and the calculation parameters. Step 2: Luminaires / LDCs You need to insert at least one row of luminaires. Therefore please move your mouse pointer to „Room structure“ in the tab „Scene“ and click with your right mouse button. The context menu opens.

Fig. 110 new luminaire row

Fig. 111 add luminaires If you open this option for the first time I your project, the product selection will open automatically. Alternatively you can use the usual ways of luminaire selection.

Note: In the product selection, you can use the Tab: Individual luminaire to import a single LDC file.

After you have added one or more luminaires to the project and closed the product selection again, the configuration dialog for the “Alternative equipment” and “Regulating steps” will open automatically (only the first time).

© Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

PART 2: ENHANCED FEATURES FOR ADVANCED S 75/81

Fig. 112 Options In the “Alternative equipment” dialog, you must enter the selected LDC’s to the “Adaption” or “Interior” group. You may create more than one entry in each group. If you want to use the same LDC with a different flux values you must select it more then once and use the “Modify type” function in the product selection (Fig. 112).

Fig. 113 Modify luminaire

© Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

PART 2: ENHANCED FEATURES FOR ADVANCED S 76/81

Fig. 114 configure luminaire controlling The first time the “Regulating steps” dialog is opened, the configuration dialog opens as well. Choose how many Control groups and Regulating steps and the kind of controlling you want. You can change this later by pressing the “configure” button. We currently three modes of switching the luminaires. Dimming (On/Off) (On/50%/Off) After creating the row of luminaires, it is possible to insert the basic parameters by selecting the row in the scene bar. If you wish you can create multiple rows, these rows will automatically synchronized, for instance after changing the type of the 4th luminaire.

© Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

PART 2: ENHANCED FEATURES FOR ADVANCED S 77/81

Fig. 115 Options By clicking the first icon in the toolbar, you can switch to the luminaire list of the current row.

Fig. 116 Options In Fig. 116 you can manually change the control group and the power level of each row. To begin with, each row will be created with a unique distance between the individual luminaires. In list mode you can modify the x-position of each luminaire. If you select one or more grid rows, you can use the buttons. to insert a copy of the selected luminaire this button deletes the selected luminaire and change the x-position of one of the luminaires, If you activate the shift lock all the following luminaires will also be moved. © Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

PART 2: ENHANCED FEATURES FOR ADVANCED S 78/81

Step 3: Calculation There are two ways of running the calculation: Automatic placing (Button

)

(Fig. 117 Tunnel automatic placement) If you select this mode, the program will try to find the ideal position on the basis of the specified parameters and the regulating strategy. After running this mode, you will find the luminaires of the adaptation rows sorted like this, for example 3 2 1 3 2 1 3 2 1 3 2 1…….2 1 2 1 1 1 1 The program will also place the luminaires with the lower power levels at the end of the row. For the interior rows, the tunnel module will try to find the optimum distance between the luminaires. Before the automatic placement starts, a dialog opens which allows you run the optimization of interior and entrance separately or together.

Fig. 117 Tunnel automatic placement For the entrance lighting you have a few options to control the result. Maximum luminaire distance: At this distance the program uses the next lower flux level. Min luminaire dist. Automatic shift Hold the initial lum. dist / Lum. dist. At the beginning This forces the program, to use the given distance in first part of the entrance zone. © Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

PART 2: ENHANCED FEATURES FOR ADVANCED S 79/81 Useful to make (small) corrections if the automatic calculated value is not optimal. Factor length / Factor luminance The algorithm will work with modified length / entry luminance, this spreads the nominal curve during the placing calculation.normal calculation (Button

)

This command triggers a calculation of the current situation. Note: at the moment you have to press the button each time you want to recalculate. If no measuring area exists in the project, the program will automatically create the three standard areas: Entrance area: for the constant level in the first part of the threshold zone Interior area: for the constant level in the interior zone Adaptation area: for variable levels from the portal to the end of the transition zone

Fig. 118 Calculation specifications You can modify these manually after the program has created them. At the moment, the program will recreate them automatically when you delete them all. We are going to make this behavior configurable, and will also provide defined areas. Step 4: Checking results After the calculation, you will find all the available results for each area and the regulating steps in the

. In the regulating steps dialog, you can choose more than one regulating step to calculate. You can open the results by using the toolbar “outputs”.

Fig. 119 Toolbar “Output”

Note: Each time a output window is open you can use its properties dialog to configure its specific options

The “Result overview” output (Fig. 120) contains a summary for all three areas.

© Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

PART 2: ENHANCED FEATURES FOR ADVANCED S 80/81

Fig. 120 “Result overview”

Fig. 121 result overview

© Relux Informatik AG, Fit for ReluxSuite, 18.05.2010

PART 2: ENHANCED FEATURES FOR ADVANCED S 81/81

Fig. 122 properties for result overview

© Relux Informatik AG, Fit for ReluxSuite, 18.05.2010