1+1-manual 1y6m3u

TM

Button Function “

“

“

”

”

Smart Music 1+1

”

In TF Card playing or Bluetooth mode: Press the button to get next song. ” In Tf Card playing , Bluetooth or Aux playing mode: Press or hold the button to decrease volume. ” In Tf Card playing , Bluetooth or Aux playing mode: Press or hold the button to increase volume. “ In Tf Card playing or Bluetooth mode: Press the button to get previous song “ In Tf Card playing mode: Press the button to play/pause/answer the call/ cancel dialing. Hold the button 2 seconds to redial the last number / reject the incoming call / phone and speaker’s audio exchange. Hold the button 3 seconds to get into Bluetooth paring mode. In Tf Card or AUX playing mode: Hold the button 2 seconds,Tf Card playing and Aux playing exchange. “ In Bluetooth mode: Hold the button 5 seconds to get into the master and slave pairing (between two Smart Music 1+1 speakers) ”

Function and operation 3.1 Defination A. Bluetooth pairing: the Bluetooth enabled mobile phone, computer, tablet and other devices ( HSP, A2DP, AVR etc. profile) pair with Bluetooth speaker. The code is no need when pairing with the device with V2.1. B. Series two Bluetooth speakers pairing: The code is no need when the two Bluetooth speakers both with true wireless function pairing. Once any of the series two Bluetooth speaker connected with mobile phone or computer , then it is the master speaker and works as the left channel for the AV source, Red and blue LED of the master speaker stays on; the other one is the slave speaker, works as the right channel of the AV source. The red LED of slave speaker stay on. Note: iPhone itself could connect two Bluetooth speakers simultaneously, just one of Bluetooth speakers from the series two speakers could be connected with phone. C. Manually connect with other Bluetooth devices: when the Bluetooth function of a mobile phone or computer is on (The mobile phone or computer had already connected with the master speaker and thay still have the connection records), power on the master speaker and put it into pairing mode, click the

Overview of Smart Music 1+1 Speaker

pairing connection records of the mobile phone or computer to connect the master speaker. D. Series two Bluetooth speakers connect automatically Two Bluetooth speakers had already connected with each other could pair and connect again automatically when power on. Note: the two Bluetooth speakers need to power on simultaneously or the interval of power on more than 1 seconds, otherwise it could not connect automatically in this case, you could power off any of the speaker and wait at least 3 seconds, then power on the speaker again to get connection automatically. 3.2 How to pair one Bluetooth speaker first time.

A2DP/AVR HFP / HSP

A.Slide the switch to “Bluetooth” side, when hearing a beep tone, then hold the ” “ button, if you heard “DI....DI” twice , which confirm the speaker enters into pairing mode.

NFC Sensing Area

Last Song

Vol-

Vol+

Next Song

IED Indicator

Two Speaker Button

MFB

AUX MP3 OFF

TF

SV IN

B. Turn on the Bluetooth of your mobile phone, searching for “Smart Music 1+1 and click the” Smart Music 1+1 to pair, several seconds, a beep tone informs connection success, it is also showed connection with” Smart Music 1+1 “ is successfully on the mobile phone. C. Turn on the media player of the mobile phone, press ” “ button to play music through the speaker. Tips: you could use ” ,” those “ “ “ ” buttons to control music play/pause/next song/ previouse song. Notes if the media player is not come with the mobile phone,but s and sets up on the mobile phone, you maybe not control the music play/pause/ next song /previous song through the speaker. D. Hold the ” “button, redial last number. Press the button,answer the call or reject the call,Hold ” “ the ” “button when is answering the call, mobile phone and ”Smart Music 1+1” audio exchange. E. If the mobile phone showes the speaker connected with the mobile phone, however it is no voice or could not dial when hold the button. Please turn off the Bluetooth of the mobile phone and re-turn on it, click the connection record of”Smart Music 1+1” to pair, manually connect the speaker and mobile phone automatically, when the connection is successful, please play music or dial again.

3.3 How to pair with one speaker again

LED Indication Green LED flashes (In TF Card playing): TF card playing. Green LED stays on (In TF Card playing): TF card Playing pause or in AUX mode. Blue LED flashes: Bluetooth mode standby. Blue LED stays on: One speaker connected with one phone successfully. Green LED stays on in the First successful connection. Blue and red LED flashes alternately: Two Bluetooth speakers are connecting. Blue and green LED Flashes alternately: Two Bluetooth speakers and connecting. Green LED stays on (not in charging): Two Bluetooth speakers paired successfully. (If one speaker connect eith one phone, green LED and blue LED stay on together.) Blue and green LED stay on simultaneously: Two Bluetooth speakers paired successfully and connected with one phone. Green LED stay on or flashes in Bluetooth mode’ with a frequent “DuDu” prompt voice: low voltage warning. Red LED stays on (Slide switch in off state and charging): charging for the unit. Red LED turns off (Slide switch in off state and charging): fully charged.

A2DP/AVR HFP / HSP

A. Slide the switch into Bluetooth side. B. Turn on the Bluetooth of the mobile phone and click connection records of “Smart Music 1+1”, youcould hear a beep to show connection is successful. C. Turn on the media player of mobile phone, press ” “ button to play music through the speaker. Tips: you could use ” “ ” those, “ “ ” button to control music play/pause/next song/ previous song. Note if the media player is not come with the mobile phone, but and sets up on the mobile phone, you maybe not control the music play/pause/nextsong/previous song through the speaker. D. Hold the ” “ button, redial last number. Press the ” “ button, answer the call or reject the call Hold the ” “ button when is answering the call mobile phone and “Smart Music 1+1” audio exchange. E. If the mobile phone shows the speaker connected with the mobile phone, however it is no voice or could not dial when hold the ” “ button. Please turn off the Bluetooth of the mobile phone and

re-turn on it, click the connection records of “Smart Music 1+1” to pair, manually connect the speaker and mobile phone automatically, when the connection is successful, please play music or dial again. F. If the connection records of the mobile phone are cleared, please follow the instruction 3.2 again. 3.4 How to pair with two Bluetooth speakers A2DP/AVR

A2DP/AVR

HFP / HSP

MASTER

SLAVE

A. Slide the two Bluetooth speaker’s switch to the Bluetooth side separately, when you hearing a beep tone separately, then hold the two speaker’s button. If you heard “DI”, it enters into series two speaker pairing mode and the green and blue LED flashes alternately. Around 20 seconds later, a beep tone show the series two speaker paired successfully. Take one of the series two connected speaker, hold ” “,once you heard “DI....DI” twice, furthermore red and blue LED flashes alternately which shows the speaker enter into Bluetooth pairing mode. B. Turn on the Bluetooth of the mobile phone or computer searching for “Smart Music 1+1” Click “Smart Music 1+1” to pair, several seconds, a beep tone informs connection success, it is also ,showed connection on the mobile phone. The Speaker

connected with mobile phone or computer is the master speaker (worked as left channel), the other one is the slave speaker (worked as left channel). C. Turn on the media player of mobile phone press button to play music through the speaker. Tips: you could use ” ” those “, “ “, ” button to control music play/pause/next song/ previous song. Note if the media player is not come with the mobile phone, but and sets up on the mobile phone, you maybe not control the music play/pause/ next song/previous song through the speaker. “ button,redial last number. Press the D. Hold the ” ” “ button, answer the call or reject the call. Hold the ” “ button when is answering the call. mobile phone and ”Smart Music 1+1” audio exchange.(Only master speaker has this function.) E. If the mobile phone shows the speaker connected wih the mobile phone, however it is no voice or could not dial when hold the ” “ button please turn off the Bluetooth of the mobile phone and re-turn on it ,click the connection record of ”Smart Music 1+1”to pair, manually connect the speaker and mobile phone automatically, when the connection is successful, please play music or dial again.

3.5 How to pair with two Bluetooth speakers again

Warranty Card

Specification Bluetooth version: V3.0

Dimension: 131*80*65mm

Voltage of built-in battery: 3.7V

Battery Capacity: 1200MAh

Distortion: <0.5%

Loud Speaker Dimention: 40mm 3W

Net Weight: about 385g

SNR: > 85Db

Charging Voltage: 5V

Charging Time: 3-4 hours

Taking Time: around 8 hours

Music Working Time: around 4.5 hours in Max volume

Notice: 1. Keep them out of te reach of small children. 2. Please don’t strike or hit the product. 3. Keep the product away from water and high temperature; do not use this product in extreme weather. Do no put the product into fire. 4. Do not block the mesh of the speaker 5. If the product has problems, please do not take apart by yourself and return to the shops where you bought for repairing. 6. Rust, surface shedding is the natural oxidation, which is not under the warranty.

When purchasing this product,please fill in this card and be properly preserved. Product Name: Purchase Date: Customer Name: Customer Tel: Customer Add: Distribution: Distributior Tel: Distributor Add: Signature:

A2DP/AVR

A2DP/AVR

HFP / HSP

MASTER

SLAVE

A. Turn on the series two speaker and last connected mobile phone or computer, then slide the two speaker’s switch to the Bluetooth side one by one (the interval is more than 1 second, when you hearing a beep tone separately, then a beep tone shows the series two speaker connected automatically. The speaker connected with mobile phone or computer is the master speaker ( worked as left channel), the other one is the slave speaker ( worked as right channel). B. Turn on the media player of mobile phone, press ” “ button to play music through the speaker. Tips: You could use those buttons to control music play/pause/next song /previous song. ” ” “ “ “ ” Notes if the media player is not come with the mobile phone but and sets up on the mobile phone, you maybe not control the music play/pause/ next song/previous song through the speaker. C. Hold the ” “ button, redial last number. Press the ” “ button,answer the call or reject the call. Hold the ” “ button when is answering the call, mobile phone and ”Smart Music 1+1” audio exchange. (Only master speaker has this function.) D. If the mobile phone shows the speaker connected

With the mobile phone, however it is no voice or could not dial when hold the ” “ button. Please turn off the Bluetooth of the mobile phone and re-turn on it, click the connection records of ”Smart Music 1+1” to pair, manually connect the speaker and mobile phone automatically, when the connection is successful, please play music or dial again. E. If the connection record of the mobile phone are cleared, please follow the instruction 3.4 again. 3.6 How to use AUX input A. Slide the switch into MP3 side, AUX signal input form the AUX connector. B. Put the 3.5mm jack to the mobile phone or computer, and connect the other mini jack to the speaker, press ” , button to volume down or up. ”, “ or hold“ C. Hold ” “ button to change into TF card playing mode or AUX mode. D. Please unplug the AUX audio cable when switch is on Bluetooth side; in case Bluetooth do not work well.

3.7 How to use TF card A. Slide the switch to MP3 side B. Plug the TF card with MP3 documents into the TF card slot, it will play music automatically. C. Hold ” “ button to change into TF card playing mode or AUX mode.