59-form And Plot Frame Editor.pdf 715r3q

dialog is opened, in which you specify the most important properties of the new form. (This dialog can also be called up for an opened form after the event to allow you to change the properties at any time). Precondition: You have opened a project. Utilities > Master data > Form > New 1. In the Create form dialog, select the drive and directory, in which the new form should be saved.

2. In the File name field, enter a descriptive name for the form.

EPLAN Training

5

Form and Plot Frame Editor 3. From the Save as type drop-down list, select the form type (e.g. table of contents, cable diagram, etc.) that you want to create.

4. In the Path field, select Popup menu > Go to default if you would like to return to the standard settings for drive and directory. (The default directory is either the EPLAN-specific default path : \Forms\ or the setting specified under Options > Settings > > Management > Directories.)

5. Click [Save].

EPLAN Training

6

Form and Plot Frame Editor 6. If necessary, in the Form properties - dialog, select another form type for the new form from the Form type drop-down list.

7. From the Category drop-down list, select which properties should be displayed in the list within the category.

EPLAN Training

7

Form and Plot Frame Editor 8. Specify the values for the properties by either entering or overwriting an entry or selecting a template value from a drop-down list, or jump to a special dia which you can enter additional data.

9. Click [OK]. The new form is stored according to your entries. The file extension depends on the form type selected and is displayed in the form editor.

If necessary, you can check the form during editing to quickly be made aware of and to immediately resolve incorrect entries. Tip: You can use Drag & Drop to insert existing forms by pulling a marked form from Windows Explorer into the Pages navigator dialog of your project.

This functionality is only available for certain module packages. Info

EPLAN Training

8

Form and Plot Frame Editor

2

Editing Forms

As soon as you have opened the form you want to edit in the form editor, you can edit its components.

2.1

Edit static components

Static components are elements that have no influence on the data generated by the program when the schematic logic is evaluated. These are, for example, frames, graphical elements such as rectangles, lines, embedded bitmaps, etc. These are edited exactly like the corresponding objects on schematic pages. That is, they can be filled, moved, or pulled to a different position and you can assign them certain properties, such as line type, text direction, etc. Preconditions: • You have opened a project. • You have opened the form that you would like to edit in the form editor (Utilities

> Master data > Form > Open > [Open]). Proceed as follows:

EPLAN Training

9

Form and Plot Frame Editor 1. Select Insert > Graphic to add (more) graphic elements such as rectangles, lines, and so on.

EPLAN Training

10

Form and Plot Frame Editor 2. Select Insert > Graphic > Text to enter text information

EPLAN Training

11

Form and Plot Frame Editor 3. Select Insert > Graphic > Image file to select a graphic in the Select image file dialog and to insert it, for example, as a logo in the footer of your form.

EPLAN Training

12

Form and Plot Frame Editor 4. Double-click an already added element in order to open the element-specific Properties dialog and view or change the properties.

5. Proceed in a similar manner for all static components of the form.

Tip: You can use Drag & Drop to insert text by dragging a selected text from an Office application into your open form.

2.2

Insert placeholder texts

Preconditions: • You have opened a project. • You have opened the form that you would like to edit in the form editor (Utilities

> Master data > Form > Open > [Open]). Insert > Placeholder text

EPLAN Training

13

Form and Plot Frame Editor Placeholder texts are used in forms to define the position for the placement of fields in a record. They are evaluated and automatically multiplied for each object, where the position is determined by a predefined offset in the X and Y directions. Use the "Column width" and "Row height" form properties to specify the offset. Placeholder texts are only filled during the evaluation run and not updated online.

2.3

Add special texts

Preconditions: • You have opened a project. • You have opened the form that you would like to edit in the form editor (Utilities

> Master data > Form > Open > [Open]). Insert > Special text Special texts for forms are special placeholders for project or page properties. They are automatically filled in by the program with the appropriate properties depending on the data entered. This functionality is only available for certain module packages. Info

EPLAN Training

14


3

Editing Forms Properties

The Form properties - dialog is automatically opened when creating a form; it can also be called up for an opened form after the event. Preconditions: • You have opened a project. • You have opened a form in the form editor (Utilities > Master data > Form >

Open > [Open]). Proceed as follows: 1. In the Page - navigator dialog, select the form whose properties you would like to view and edit.

EPLAN Training

15

Form and Plot Frame Editor 2. Select Popup menu > Properties.

EPLAN Training

16

Form and Plot Frame Editor 3. In the Form properties - dialog, select a different form type from the drop-down list, if necessary.

4. From the Category drop-down list, select which properties should be displayed in the list within the category.

EPLAN Training

17

Form and Plot Frame Editor 5. Specify the values for the properties by either entering or overwriting an entry or selecting a template value from a drop-down list, or jump to a special dia which you can enter additional data.

6. Click

(New) on the toolbar above the table Property name / value.

7. In the Property selection dialog, select a new property that you would like to assign to the form.

EPLAN Training

18

Form and Plot Frame Editor 8. Click [OK].

9. Assign the property a value.

10. Proceed in a similar manner for all of the other properties.

11. Click [OK]. The form is displayed with changed / new data in the form editor.


EPLAN Training

19


4

Copying Forms

To copy a form with all its content, save it to another location and / or under a different name. Precondition: You have opened a project. Utilities > Master data > Form > Copy 1. In the Form selection dialog, select the drive and directory of the form to be copied.

2. Select the form file to be copied. (Multiple selection isn't possible here).

3. Click on [Open].

4. In the Save as dialog, specify the storage location for the copy of the form.

5. In the File name field, enter a descriptive name for the new form.

EPLAN Training

20

Form and Plot Frame Editor 6. Click [Save]. The form is copied and the copy opened for editing.


EPLAN Training

21


5

Dynamically Placing Graphics

To create header, data areas, and footers within a page as well, there is the concept of dynamic forms. Since the positions of these areas are dynamic and they should normally stand out in the table graphic, each row generated in an evaluation is able to draw a frame in a dynamic form. Note: Dynamic forms can be identified by the Dynamic entry in the drop-down list for the Form handling form property. Example: A device tag list should be created with the following dynamic areas: Device tag list (page header) DT / Quantity / Designation Manufacturer: H1 (group header) K1 / 10 / Designation 1 K2 / 5 / Designation 2 Kn / 99 / Designation n Manufacturer: H2 (group header) K1 / 10 / Designation 1 K2 / 5 / Designation 2 Kn / 99 / Designation n

This information is drawn in the form editor as graphic row frames and written with each generated row in a report page. In addition, it is also possible to define graphic or text objects as header, data, or footer elements, i.e. not only placeholder texts. Preconditions: • You have opened a project. • You have opened the dynamic form that you would like to edit in the form editor

(Utilities > Master data > Form > Open > [Open]). Insert > Dynamic form 1. Select whether you want to define a header, a heading, a data area or a footer from the subsequent menu. The rectangle representing the area hangs on the cursor.

EPLAN Training

22

Form and Plot Frame Editor 2. Click with the mouse to place the initial corner of the rectangle to be drawn.

3. Click to specify the end position of the rectangle. The rectangle displayed in the respective area is drawn; in addition, information about which area type it is (header, data or footer or heading) is displayed in the upper left.

4. Select the newly defined rectangle.

5. Select Insert > Placeholder text.

EPLAN Training

23

Form and Plot Frame Editor 6. In the Placeholder text dialog, click [...] in the Property field of the Placement tab.

7. In the Placeholder text - dialog, select the property that you want to define as a placeholder for the respective area.

8. Click [OK].

EPLAN Training

24

Form and Plot Frame Editor 9. If necessary, edit other placeholder text properties in the Placeholder text dialog's tabs.

10. Click [OK].

The various defined ranges are combined with form alignment by row (property Form structure) from "lower left" to "upper left":

If the form alignment is by column, the defined ranges are combined from "lower right" to "lower left":

(In both illustrations: 1 = Header 2 = Data area 3 = Footer) Notes: • If several of the same defined ranges (e.g. several data areas) are placed, only

one is taken into consideration for the reports. • Additional selection functions are available as an optical control function for

dynamic forms (Edit > Select) that each display all elements of the header, the footer or data area, or the heading. In general, it is a normal selection, i.e. EPLAN Training

25

Form and Plot Frame Editor all marked elements can be deleted, copied, moved, etc. • Like all other forms, dynamic forms can also be automatically checked during

editing (Utilities > Check form), e.g. for the correct use of defined ranges.


EPLAN Training

26


6

Checking Forms

A special function is available to check at any time during form editing whether your form is correct or there are errors. Preconditions: • You have opened a project. • You have opened the form that you would like to edit in the form editor (Utilities

> Master data > Form > Open > [Open]). Utilities > Check form 1. Confirm the prompt in the Check form dialog by clicking on [OK].

2. Click [Save] in the System messages dialog.

3. Specify drive and directory in which the log file should be saved using the Open dialog.

4. In the File name field, enter a descriptive name for the log file.

5. Click on [Open].

6. Click [Close] in the System messages dialog. The system messages that apply to the current form are saved in the corresponding file and can be printed as needed.

This functionality is only available for certain module packages. Info EPLAN Training

27


7

Inserting and Editing Placeholder Texts

Placeholder texts are used in forms to define the position for the placement of fields in a record. During the evaluation of the form, EPLAN automatically replaces these placeholders with the corresponding values of project objects on which the report is being run, such as components, pages, symbols, etc. Preconditions: • You have opened a project. • You have opened the form in which you want to define placeholder texts in the

form editor (Utilities > Master data > Form > Open > [Open]). Insert > Placeholder text 1. In the Placeholder text dialog, click [...] in the Property field of the Placement tab.

2. In the Placeholder text - dialog, select the element for which you want to define a placeholder text.

3. If needed, limit the display of possible properties by selecting an entry from the Category drop-down list.

4. Select the property text.

5. Click [OK]. The selected property is entered in the Property field.

EPLAN Training

28

Form and Plot Frame Editor 6. Change to the Format tab.

7. Specify the formatting settings of the placeholder text.

EPLAN Training

29

Form and Plot Frame Editor 8. Change to the Language tab.

9. Specify the language settings for the placeholder text.

EPLAN Training

30

Form and Plot Frame Editor 10. Change to the Border tab.

11. If needed, select the Activate alignment box check box and enter the size and treatment of the text within the frame.

EPLAN Training

31

Form and Plot Frame Editor 12. If the alignment boxes are not only to be taken into on the report page, but also drawn, then also select the Draw alignment box check box.

13. Click [OK]. The element hangs on the cursor.

14. Position the placeholder text on the form page. The element hangs on the cursor.

15. Position the placeholder text a second or third ... time.

16. Select Popup menu > Cancel action to terminate the action. The placeholder text is inserted on the form page and can be revised by double-clicking it.


EPLAN Training

32


8

Repeating Main Sub-headers on Form Pages

If you want to place a new main sub-header on the report page as soon as certain properties change, you can use the Regenerate main sub-header form property to control for which properties this should take place. Preconditions: • You have opened a project. • You have opened the form whose properties you would like to edit in the form

editor (Utilities > Master data > Form > Open > [Open]). • You have opened the Form properties - dialog, (Popup menu>

Properties in the form in the navigator dialog Pages - ). Proceed as follows: 1. In the Form properties - dialog, click [...] in the Value column of the Regenerate main sub-header property.

2. In the New main sub-header for changes dialog, click

(New).

3. In the Property selection dialog, select the property(s) that when change, a new main sub-header is generated on the report page. Multiple selection is possible here.

4. Click [OK].

5. Click (Delete) in the Main sub-header for changes dialog if necessary to again remove a property from the list.

EPLAN Training

33

Form and Plot Frame Editor (Move up) / (Move down) to move a selected property up or down, 6. Click if possible. (Multiple selection of properties is not possible here).

7. Click [OK]. The specified properties are transferred as numeric values in the Value column of the Regenerate main sub-header property.

Example: A "normal" device tag list looks like this: Device name Cross-reference =A1+O1-A1 /1.2 =A1+O1-A2 /1.3 =A1+O1-K1 /2.2 =A1+O1-K2 /2.3 =A2+O2-A1 /1.2 =A2+O2-A2 /1.3 =A2+O2-K1 /2.2 =A2+O2-K2 /2.3 In the New main sub-header for changes dialog, the Identifier property is selected, so that a new main sub-header is generated each time the identifier changes. Main sub-header "Identifier = "A"" =A1+O1-A1 /1.2 =A1+O1-A2 /1.3 =A2+O2-A1 /1.2 =A2+O2-A2 /1.3 Main sub-header "Identifier = "K"" =A1+O1-K1 /2.2 =A1+O1-K2 /2.3 =A2+O2-K1 /2.2 =A2+O2-K2 /2.3 In the New Main sub-header for changes dialog, the Higher-level function EPLAN Training

34

Form and Plot Frame Editor property is also selected next, so that a new main sub-header is generated each time the identifier and structure identifier for the higher-level function identifier block changes: Main sub-header "Identifier = "A" Higher-level function = "A1"" =A1+O1-A1 /1.2 =A1+O1-A2 /1.3 Main sub-header "Identifier = "A" Higher-level function = "A2"" =A2+O2-A1 /1.2 =A2+O2-A2 /1.3 Main sub-header "Identifier = "K" Higher-level function = "A1"" =A1+O1-K1 /2.2 =A1+O1-K2 /2.3 Main sub-header "Identifier = "K" Higher-level function = "A2"" =A2+O2-K1 /2.2 =A2+O2-K2 /2.3 When generating a report (Utilities > Reports > Generate), you must appropriate specify the additional sort in the New page if property value has changed field.


EPLAN Training

35


9

Automatically Asg Page Information

The Format for automatic page description form property can be used to specify the page information (page name, page description, higher-level function, etc.) for the page description automatically assigned when generating report lists. Preconditions: • You have opened a project. • You have opened the form whose properties you would like to edit in the form

editor (Utilities > Master data > Form > Open > [Open]). • You have opened the Form properties - dialog, (Popup menu >

Properties in the form in the navigator dialog Pages - ). Proceed as follows: 1. In the Form properties - dialog, click [...] in the Value column of the Format for automatic page description property.

2. In the Format for automatic page description dialog, select the element that should be used for the automatic page designation from the Available format elements list. (Multiple selection isn't possible here).

3. Click

(Move right).

The element is entered into the Selected format elements list.

4. Proceed in a similar way for all additional format elements.

5. Select the Separators entry in the Available format elements list.

EPLAN Training

36

Form and Plot Frame Editor 6. Click

(Move right).

7. In the Format: Separator dialog, specify which character you want to use as a separator.

8. Click [OK].

9. In the Selected format elements list of the Format for automatic page (Delete) to description dialog, select an entry if necessary and click remove the selected element from the list.

10. Click (Move up) / (Move down) to move a selected format element up or down, if possible. (Multiple selection of elements is not possible here).

11. Double-click an entry of the Separator type to revise a separator in the Format: Separator dialog.

12. Click [OK]. The format elements are saved.

In the Form properties - < Form name> dialog, the assignments are displayed as follows in the Value column: ; | ; |... where the numbers are assigned as follows:

EPLAN Training

37

Form and Plot Frame Editor • Page type / form type: 1 • Name of first header object: 2 • Name of first data object: 3 • Name of last data object: 4 • Separators: 5.

Example: 2;1|5;4 for:

Name of first header object, number / length: 1 Separator, number / length: 4


EPLAN Training

38


10

Defining General Graphics in Forms

The Assignment: Index to graphic form property is required, for example, for displaying a (fixed) graphic in the data area in the terminal diagram. Preconditions: • You have opened a project. • You have opened the form whose properties you would like to edit in the form


Properties in the form in the navigator dialog Pages - ). Proceed as follows: 1. In the Form properties - dialog, click [...] in the Value column of the Assignment: Index to graphic property.

2. In the Assignment of "Index to graphic" dialog, click new row in the list of assignments.

(New) to create a

3. In the Index field, enter a different value, if necessary. The default is always .

4. Click [...] in the Symbol name field.

5. In the Symbol selection dialog, select the symbol whose graphic you want to assign to the index.

6. Click [OK].

EPLAN Training

39

Form and Plot Frame Editor The associated data is entered into the Symbol library and Description fields.

7. In the Symbol variant field, select the desired symbol from the drop-down list of all the existing variants of the current symbol.

8. Perform all further allocations in a similar manner .

9. Click [OK]. The assignments are stored and can be inserted into the form using placeholders.

In the Form properties - dialog, the assignments are displayed as follows in the Value column: ;<Symbol library>;<Symbol number>; | ;<Symbol library>;<Symbol number>; |... Example: 1;SPECIAL;307;0|2;IEC_EPLAN_D;12;1

Note: Take care that only the symbols of the included symbol libraries are displayed.


EPLAN Training

40


11

Defining Graphics Depending on Property Values in Forms

The Assignment of property / value to graphic form property is required to display a specific graphic in the data area for a property that has a specific value. Preconditions: • You have opened a project. • You have opened the form whose properties you would like to edit in the form


Properties in the form in the navigator dialog Pages - ). Proceed as follows: 1. In the Form properties - dialog, click [...] in the Value column of the Assignment of property / value to graphic property.

2. In the Assignment "Property / value to graphic" dialog, click create a new row in the list of assignments.

(New) to

3. In the Category / property field, click [...].

4. In the Property selection dialog, select the property to which you want to assign a graphic.

5. Click [OK].

EPLAN Training

41

Form and Plot Frame Editor 6. In the Value field, enter the value that the property should have.

7. In the Symbol name field, click [...].

8. In the Symbol selection dialog, select the symbol whose graphic you want to assign to the property.

9. Click [OK]. The associated data is entered into the Symbol library and Description fields.




In the Form properties - dialog, the assignments are displayed as follows in the Value column: ; ; ;<Symbol library>;<Symbol number>; | ; ; ;<Symbol library>;<Symbol number>; |... EPLAN Training

42

Form and Plot Frame Editor Example: 20400;0;SIE;SPECIAL;310;0|1120;0;A*;IEC_EPLAN_D;7;1



EPLAN Training

43


12

Defining Graphics Depending on Function Definitions in Forms

The Assignment: Function definition to graphic form property is required to place different graphics depending on concrete values of the function definition, e.g. symbols for terminals depending on terminal type. Preconditions: • You have opened a project. • You have opened the form whose properties you would like to edit in the form


Properties in the form in the navigator dialog Pages - ). Proceed as follows: 1. In the Form properties - dialog, click [...] in the Value column of the Assignment: Function definition to graphic property.

2. In the Assignment of "Function definition to graphic" dialog, click (New) to create a new row in the list of assignments.

3. In the Function definition field, click [...].

4. In the Function definitions dialog, select the function definition to which you want to assign a graphic.

EPLAN Training

44

Form and Plot Frame Editor 5. Click [OK]. The associated data is entered in the Category, Group, and Description fields.

6. In the Symbol name field, click [...].

7. In the Symbol selection dialog, select the symbol whose graphic you want to assign to the function definition.

8. Click [OK]. The associated data is entered into the Symbol library and Description fields.




In the Form properties dialog, the assignments are displayed as follows in the Value column: ; ; ;<Symbol library>;<Symbol number>; | EPLAN Training

45

Form and Plot Frame Editor ; ; ;<Symbol library>;<Symbol number>; |... Example: 200;1;1;SPECIAL;30;0|100;99;1;IEC_EPLAN_D;211;1



EPLAN Training

46


13

Inserting Form Graphics

Certain placeholders can't be replaced by text during the evaluation run, but rather are replaced by graphical symbols, where the assignment to the respective graphic is defined in the Form properties - dialog. The following placeholder texts are available: • Assignment: Index to graphic [1-100]: Replaces the placeholder by the

symbol that was stored in the Assignment "Index to graphic" dialog for the respective index. • Assignment: Function definition to graphic: Replaces the placeholder by the

symbol that was stored in the Assignment "Function definition to graphic" dialog for the corresponding function definition. • Assignment of property / value to graphic [1-2]: Replaces the placeholder by

the symbol that was stored in the Assignment "Property / value to graphic" dialog for the corresponding property There are also special placeholders for generated graphics that are used in terminal diagrams, terminal bills of materials, and terminal connection diagrams as jumper graphics. For example, these include the placeholders "Jumper graphics (jumper level)", "Graphic for internal wire jumpers", "Graphic for saddle jumpers", etc. Preconditions: • You have opened a project. • You have opened a suitable form in the form editor in which you want to replace

placeholder texts with graphics (Utilities > Master data > Form > Open > [Open]). • You have specified the Index to graphic, Function definition to graphic, and

Property / value to graphic assignments in the Form properties - dialog. Insert > Placeholder text 1. In the Placeholder text dialog, click [...] in the Property field of the Placement tab.

EPLAN Training

47

Form and Plot Frame Editor 2. In the Placeholder text - dialog, select the element (e.g. terminal properties) for which placeholder text is available for graphics.

3. Limit the scope of possible data by selecting the Settings entry from the Category drop-down list.

4. Select the desired assignment type.

5. Click [OK]. The property is entered in the Property field on the Placement tab.

6. If necessary, change the property defaults related to format, language and frame.


8. Position the placeholder text on the form page. The element hangs on the cursor.

9. Position the placeholder text a second or third ... time.

10. Select Popup menu > Cancel action to terminate the action.

EPLAN Training

48

Form and Plot Frame Editor The placeholder text is inserted on the form page and can be replaced in the appropriate report by the graphic selected in the form properties.


EPLAN Training

49


14

Generating Plot Frames

When generating a plot frame, the Plot frame properties - dialog is opened, in which you specify the most important properties of the new plot frame. (This dialog can also be called up for an opened plot frame after the event to allow you to change the properties at any time.) Precondition: You have opened a project. Utilities > Master data > Plot frame > New 1. In the Create plot frame dialog, select the drive and directory, in which the new plot frame should be saved.

2. In the File name field, enter a descriptive name for the plot frame.

3. In the Path field, select Popup menu > Go to default if you would like to return to the standard settings for drive and directory. (The default directory is either the EPLAN-specific default path : \PlotFrames\ or the setting specified under Options > Settings > > Management > Directories.)

4. Click [Save].

5. In the Plot frame properties- dialog, select the properties to be shown in the list from the Category drop-down list.

6. Specify the values for the properties, either by making or overwriting an entry or by selecting a preset value from a drop-down list.

EPLAN Training

50

Form and Plot Frame Editor 7. Click [OK]. The new plot frame is saved according to your entries and displayed in the plot frame editor.


EPLAN Training

51


15

Editing Plot Frames

As soon as you have opened the plot frame you want to edit in the plot frame editor, you can edit its components.

15.1 Edit static components Static components are elements that have no influence on the data generated by the program when the schematic logic is evaluated. These are, for example, frames, and graphical elements such as rectangles, lines, embedded bitmaps, etc. These can be edited just like the corresponding objects on schematic pages. That is, they can be filled, moved, or pulled to a different position and you can assign them certain properties, such as line type, text direction, etc. Tip: You can show the column division of the plot frame via View > Columns. This makes the overview easier when inserting new elements.

Preconditions: • You have opened a project. • You have opened the plot frame that you would like to edit in the plot frame

editor (Utilities > Master data > Plot frame > Open > [Open]). Proceed as follows: 1. Select Insert > Graphic to add (more) graphic elements such as rectangles, lines, and so on.

2. Select Insert > Graphic > Text to enter text information

3. Select Insert > Graphic > Image file to select a graphic in the Select image file dialog and to insert it, for example, as a logo in the footer of your plot frame.

EPLAN Training

52

Form and Plot Frame Editor 4. Double-click an already added element in order to open the element-specific Properties dialog and view or change the properties.

5. Proceed in a similar manner for all static components of the plot frame.

Tip: You can use Drag & Drop to insert text by dragging a selected text from an Office application into your open plot frame.

15.2 Add special texts Preconditions: • You have opened a project. • You have opened the plot frame that you would like to edit in the plot frame

editor (Utilities > Master data > Plot frame > Open > [Open]). Insert > Special text In addition to static elements, plot frames consist of – and this is the more important aspect – special texts. This includes placeholders for project and page properties that are filled in accordance to the data entered from the program. You can also insert row and column texts that are then taken into consideration in the reports. This functionality is only available for certain module packages. Info

EPLAN Training

53


16

Editing Plot Frame Properties

The Plot frame properties - dialog is automatically opened when creating a plot frame; it can also be called up for an opened plot frame after the event. Preconditions: • You have opened a project. • You have opened a plot frame in the plot frame editor (Utilities > Master data >

Plot frame > Open > [Open]). Proceed as follows: 1. In the Page - navigator dialog, select the plot frame whose properties you would like to view and edit.

2. Select Popup menu > Properties.

3. In the Plot frame properties- dialog, select the properties to be shown in the list from the Category drop-down list.

4. Specify the values for the properties, either by making or overwriting an entry or by selecting a preset value from a drop-down list.

5. Click

[New] on the toolbar above the table Property name / Value.

6. In the Property selection dialog, select a new property that you would like to assign to the plot frame.

EPLAN Training

54

Form and Plot Frame Editor 7. Click [OK].

8. Assign the property a value.

9. Proceed in a similar manner for all of the other properties.

10. Click [OK]. The plot frame is displayed with changed / new data in the plot frame editor.


EPLAN Training

55


17

Copying Plot Frames

To copy a plot frame with all its content, save it to another location and / or under a different name. Precondition: You have opened a project. Utilities > Master data > Plot frame > Copy 1. In the Plot frame selection dialog, select the drive and directory of the plot frame to be copied.

2. Select the desired plot frame file. (Multiple selection isn't possible here).

3. Click on [Open].

4. In the Save as dialog, specify the storage location for the copy of the plot frame.

5. In the File name field, enter a descriptive name for the new plot frame.

6. Click [Save]. The plot frame is copied and the copy opened for editing.


EPLAN Training

56


18

Inserting and Editing Special Texts

18.1 Insert project and page properties in forms and plot frames The special texts available for forms and plot frames are placeholders for project and page properties that are automatically replaced by EPLAN with the corresponding properties. Preconditions: • You have opened a project. • You have opened the form in which you want to define special texts in the form

editor (Utilities > Master data > Form > Open > [Open]). You have opened the plot frame in which you want to define special texts in the plot frame editor (Utilities > Master data > Plot frame > Open > [Open]). Insert > Special text 1. In the subsequent menu, select whether a page property or project property should be inserted.

2. In the Special text <...> dialog, click [...] in the Property field of the Placement tab.

3. In the Property selection dialog, select the page or project property that should be inserted in the plot frame / form.

4. If needed, limit the display of possible properties by selecting an entry from the Category drop-down list.

EPLAN Training

57

Form and Plot Frame Editor 5. Click [OK]. The selected property is entered into the Property field.

6. Change to the Format tab.

7. Specify the formatting settings of the special text.

8. Change to the Language tab.

9. Specify the language settings for the special text.

10. Change to the Border tab.

11. If needed, select the Activate alignment box check box and enter the size and treatment of the text within the frame.

12. If the alignment boxes are not only to be taken into on the report page, but also drawn, then also select the Draw alignment box check box.


EPLAN Training

58

Form and Plot Frame Editor 14. Positioning the special text on the plot frame / form page. The element hangs on the cursor.

15. Positioning the Special text a Second or Third Time time.

16. Select Popup menu > Cancel action to terminate the action. The special text is inserted on the plot frame / form page and can be revised by double-clicking it.

Note: EPLAN internally notes the last selected property and suggests it again when next inserting. All settings made during the placement are also used.

18.2 Insert column and row texts in plot frames There are also column and row texts available for plot frames in addition to the project and page properties. Preconditions: • You have opened a project. • You have opened the plot frame in which you want to define row and column

texts in the plot frame editor (Utilities > Master data > Plot frame > Open > [Open]). Insert > Special text 1. In the subsequent menu, select whether a column text or a row text should be inserted into the plot frame.

EPLAN Training

59

Form and Plot Frame Editor 2. In the Format tab of the Special text <...> dialog, specify the formatting settings for the row and column text.


4. Position the special text on the plot frame page. The element hangs on the cursor.

5. Positioning the Special text a Second or Third Time time.

6. Select Popup menu > Cancel action to terminate the action. The special text is inserted on the plot frame page and can be revised by double-clicking it.

Note: The Utilities > Place column and row text again can be used to delete these special texts and automatically placed on the border areas of the defined columns and rows.


EPLAN Training

60


19

Configuring the Display of Placeholder and Special Texts

To arrange form and plot frame editing more clearly, so that inserting graphical elements like lines and graphics is easier, there are the options described in the following:

19.1 Hide placeholder texts You can temporarily hide the placeholder text. Preconditions: • You have opened a project. • You have opened the form that you would like to edit in the form editor (Utilities

> Master data > Form > Open > [Open]). Proceed as follows: 1. Select the menu items View > Hide placeholders. The placeholder texts will be hidden.

2. Edit the graphical elements of the form.

3. Select View > Hide placeholders to display the placeholder texts again.

19.2 Display properties as numbers The property texts are displayed as texts by default. However, this can be bothersome if there are several entries in a row, for example. Preconditions:

EPLAN Training

61

Form and Plot Frame Editor • You have opened a project. • You have opened the form that you would like to edit in the form editor (Utilities

> Master data > Form > Open > [Open]). Or you have opened the plot frame that you would like to edit in the plot frame editor (Utilities > Master data > Plot frame > Open > [Open]). Proceed as follows: 1. Select View > Properties as numbers. The property texts are replaced by their internal ID numbers.

2. Edit the form / plot frame as desired.

3. Select View > Properties as numbers to display the property texts as texts again.

19.3 Display column division It can helpful to display columns, if you want to make sure that you are placing a certain object in a certain column. Preconditions: • You have opened a project. • You have opened the form that you would like to edit in the form editor (Utilities

> Master data > Form > Open > [Open]). Or you have opened the plot frame that you would like to edit in the plot frame editor (Utilities > Master data > Plot frame > Open > [Open]). Proceed as follows: 1. Select View > Columns. The column division is displayed in the form / plot frame using lines.

EPLAN Training

62

Form and Plot Frame Editor 2. Edit the form / plot frame as desired.

3. Select View > Columns to return to the display without columns.


EPLAN Training

63


20

Updating the Column and Row Designations of Plot Frames

Both columns and rows can be predefined alphanumerically and numerically via the numbering formats in the plot frame. Such a default can then be later updated.

20.1 Specify column and row numbering Precondition: You have opened a project. 1. Select Options > Settings > Projects > "Project name" > Management > Pages.

2. In the Path numbering group box, specify whether the numbering should be page or project related or by structure identifier by selecting the appropriate option.

3. Click [OK].

With the page-dependent counting method, counting of column areas starts from scratch for each page, i.e., EPLAN always starts with the configured starting value and increments it until the last column of the page is reached. For numbering by project, column numbers are counted through each page, so that counting starts with the starting value on page 1 and counted to x on the last page. (Please note that all pages are counted here, unless you activate the plot frame property Display column designations on non-logic pages.) The following plot frame properties (Category Settings) are established for the report:

EPLAN Training

64

Form and Plot Frame Editor • Start value (column): The column numbers of the grid are normally numbered

from left to right (starting with 0). A different starting value can be provided here. • Start value (row) The row numbers of the grid are normally numbers from top to

bottom (starting with 0). A different starting value can be provided here. • Column numbering format: Format of column numbers. If no format is

specified, the column number is hidden. • Row numbering format: Format of row numbers. If no format is specified, the

row numbers are hidden. • Page orientation / paper format: Specifies the way in which the schematic

pages are divided into areas: Landscape or Normal Format.

20.2 Update column and row numbering Preconditions: • You have opened a project. • You have opened a schematic page to which a plot frame has been assigned.

1. Select Utilities > Update path designations. The path designations are updated according to the selection made under Settings.


EPLAN Training

65


21

Deleting a Column and Row Numbering and Placing Them Again

This function s you in the labeling of column and row areas, in that all placed column and row numbers are deleted and automatically reset. An automatic placing function sets the column and row placeholder texts exactly on the edges of the defined columns and rows. Preconditions: • You have opened a project. • You have opened a plot frame in the plot frame editor. • You have placed column or row texts in the plot frame (Insert > Special text >

Column text or Insert > Special text > Row text). 1. Select Utilities > Place column and row text again.

The column and row numbers are deleted and placed again. During the generation of special texts, the formatting last used is selected. Example: The two illustrations below show column and row numbers before and after selection of the menu item, where P1 through P3 symbolized the columns and A through C the rows.

EPLAN Training

66

Form and Plot Frame Editor Before:

After:


EPLAN Training

67


22

Documenting Forms and Plot Frames

It is possible to manage and output forms and plot frames in a special report, where a table of contents is generated and change information can be entered. The report on forms / plot frames can be a project into which the forms / plot frames are read. For this purpose there are the special reports Form documentation and Plot frame documentation. Form / plot frame documentations are overviews of all documents / plot frames used in a project. Precondition: You have selected a form via Options > Settings > Projects > "Project" > Reports > Graphical output > Forms documentation or Plot frame documentation and specified the settings for the pages you would like to create. Utilities > Reports > Generate 1. If the form documentation / plot frame documentation is not listed under the reports, click [New].

2. In the Specify report dialog select the Form documentation or the Plot frame documentation option.

3. If necessary, change the settings for Output project, Creator, and Creation date.

4. Click [OK].

5. In the Forms documentation (Total) (or Plot frame documentation (Total)) dialog specify the settings for the pages to be generated.

6. Click [OK].

EPLAN Training

68

Form and Plot Frame Editor The documentation is generated. This process can take some time, depending on the number and complexity of the data.

7. Click [Close]. The newly generated pages are inserted into the target project selected. In the list of reports, the level Form documentation / Plot frame documentation is inserted, and the list of pages contained in the documentation appears there.

EPLAN Training

69


EPLAN Training

70

59-form And Plot Frame Editor.pdf 715r3q

Overview 26281t

More details 6y5l6z

Related Documents 3h463d

59-form And Plot Frame Editor.pdf 715r3q

Character, Setting, And Plot 1t4366

Chasis Frame And Body 1v4t28

Structure And Plot Of Antigone 3k3t29

Romeo And Juliet Plot Pyramid 446h47

Romeo And Juliet Plot Overview 9732a

More Documents from "Aries Tsai" 4r5m26

64-data Transfer From Eplan 5.pdf 225u6n

59-form And Plot Frame Editor.pdf 715r3q

06. Sop Pengelolaan Keuangan 4a2zi

9.1.1.ep 4 B Bukti Tl Hasil Monev Indikator Mutu Layanan Klinis.docx 6z555p

9.4.2 Ep 6 Sk Petugas Yang Bertanggung Jawab Untuk Pelaksanaan Kegiatan Upaya Perbaikan r264i

7.1 - Basic Trigonometric Identities 343v1t