Aker Wirth - Tunnel Boring Machines, Raise Boring And Full-face Shaft Boring Machines - Mining Technology.pdf 6r6lx
This document was ed by and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this report form. Report 3i3n4
Overview 26281t
& View Aker Wirth - Tunnel Boring Machines, Raise Boring And Full-face Shaft Boring Machines - Mining Technology.pdf as PDF for free.
More details 6y5l6z
- Words: 791
- Pages: 2
Aker Wirth - Tunnel Boring Machines, Raise Boring and Full-Face Sha...
1 of 2
Mining Technology Market & Customer Insight
http://www.mining-technology.com/contractors/tunnelling/wirth2
Request Demo
About Market & Customer Insight
Aker Wirth offers a wide range of equipment for tunneling, exploration drilling and the construction of shafts for ventilation, production or any other purpose.
Tunnel boring machines Aker Wirth manufactures and supplies tunnel boring machines for mechanized tunnel driving for all geological conditions and all environmental requirements. Aker Wirth machines are in use in tunnel boring projects all over the world and for the excavation of a wide variety of tunnels.
Hard rock tunneling equipment
Aker Wirth hard tock tunnel boring machine used in an infrastructure project in Spain.
Aker Wirth tunnel boring machines (TBMs) for hard rock are classified into two types: open hard rock TBM (known as Aker Wirth gripper TBM) for boring in stable rock, and shielded hard rock TBM for tunneling in varying rock formations that alternate between stable and unstable formations. Special types of TBM of this category are machines for the enlargement of tunnels, Aker Wirth reamer TBM (TBE) and for inclined tunneling.
Mixed rock tunneling equipment For tunneling in mixed ground formations – hard and soft – Aker Wirth provides shielded machines furnished with the functional features of hard rock TBM and soft ground TBM. Subject to project requirements, the soft ground features of an earth pressure balance TBM or a hydro-/slurry shield TBM will be introduced.
Soft rock tunneling equipment
Aker Wirth was the first manufacturer in the world to equip a hard-rock tunnel boring machine with undercutting technology and was awarded an Innovation Prize for this in 2005.
Tunneling in soft and unstable geological formations requires the permanent of the tunnel being bored. Aker Wirth provides earth pressure balance TBM or hydro-/slurry shield TBM for these projects. Tunneling is performed in closed mode with pressurization of the excavation face. Aker Wirth was the first manufacturer in the world to equip a hard-rock tunnel boring machine with undercutting technology and was awarded an Innovation Prize for this in 2005.
Mobile tunnel miner The mobile tunnel miner was specially developed for hard rock tunneling. The MTM can excavate any shape of tunnel (rectangular, horse-shoe or circular).
The mobile tunnel miner (MTM) is a flexible and innovative solution for hard rock tunneling.
The MTM is working with the 'undercutting technique,' requiring less cutting forces than with a normal hard rock tunnel boring machine. The machine is equipped with a crawler unit and a gripper system. The walking unit allows the MTM to move without using the crawlers. The MTM is equipped with three, four or eight cutting arms, depending on the size of the tunnel. The muck is transported to the rear of the machine similarly as with a roadheader.
Raise boring For decades raise boring has been an accepted method for the installation of production and ventilation shafts and ore es for mines. It is also a widely used technology in infrastructural projects for tunnel ventilation or surge shaft
HG330-SP – world record holder with 7.1m diameter.
04/02/2014 5:45 AM
Aker Wirth - Tunnel Boring Machines, Raise Boring and Full-Face Sha...
2 of 2
http://www.mining-technology.com/contractors/tunnelling/wirth2
in hydro-electric power projects. Aker Wirth raise boring machines and cutters have been in operation in the hardest rock, up to 700MPa USC. The equipment ranges from 112kW to 600kW installed power, the cutting diameters from 1m to 6m and the boring depths up to 1,300m. Aker Wirth built the world’s largest raise borer, the HG 380 with an operating torque of max. 710kNm. Aker Wirth raise boring machines hold the world record for the largest diameter raise (7.1m) and the longest raise (1,260m).
For large diameter shaft boring, Aker Wirth offers two solutions.
Shaft boring solutions For large diameter shaft boring, Aker Wirth offers two solutions: Blind shaft boring machine (VSB) Shaft reaming machine (SB) In the latter case the excavated muck falls through the pilot hole to a lower level. The pilot hole of 1m-2m diameter can be excavated with a raise boring machine. If a pilot hole is not possible, a blind shaft boring machine needs to be employed, where the excavated material is transported through the shaft to the surface.
Cutters and tools For each of our products Aker Wirth supplies the necessary spare parts and cutter wear parts. The Aker Wirth cutters are strong, wear resistant and have proven their reliability in the field, leading to high production rates and low costs per ton of production.
Details Aker Wirth GmbH Koelner Strasse 71- 73 Erkelenz 41812 : Ms Martina Rohe Tel: +49 2431 83 358 Fax: +49 2431 83 455 Email: [email protected] URL: www.akersolutions.com/akerwirth URL: www.wirth-europe.com
04/02/2014 5:45 AM
1 of 2
Mining Technology Market & Customer Insight
http://www.mining-technology.com/contractors/tunnelling/wirth2
Request Demo
About Market & Customer Insight
Aker Wirth offers a wide range of equipment for tunneling, exploration drilling and the construction of shafts for ventilation, production or any other purpose.
Tunnel boring machines Aker Wirth manufactures and supplies tunnel boring machines for mechanized tunnel driving for all geological conditions and all environmental requirements. Aker Wirth machines are in use in tunnel boring projects all over the world and for the excavation of a wide variety of tunnels.
Hard rock tunneling equipment
Aker Wirth hard tock tunnel boring machine used in an infrastructure project in Spain.
Aker Wirth tunnel boring machines (TBMs) for hard rock are classified into two types: open hard rock TBM (known as Aker Wirth gripper TBM) for boring in stable rock, and shielded hard rock TBM for tunneling in varying rock formations that alternate between stable and unstable formations. Special types of TBM of this category are machines for the enlargement of tunnels, Aker Wirth reamer TBM (TBE) and for inclined tunneling.
Mixed rock tunneling equipment For tunneling in mixed ground formations – hard and soft – Aker Wirth provides shielded machines furnished with the functional features of hard rock TBM and soft ground TBM. Subject to project requirements, the soft ground features of an earth pressure balance TBM or a hydro-/slurry shield TBM will be introduced.
Soft rock tunneling equipment
Aker Wirth was the first manufacturer in the world to equip a hard-rock tunnel boring machine with undercutting technology and was awarded an Innovation Prize for this in 2005.
Tunneling in soft and unstable geological formations requires the permanent of the tunnel being bored. Aker Wirth provides earth pressure balance TBM or hydro-/slurry shield TBM for these projects. Tunneling is performed in closed mode with pressurization of the excavation face. Aker Wirth was the first manufacturer in the world to equip a hard-rock tunnel boring machine with undercutting technology and was awarded an Innovation Prize for this in 2005.
Mobile tunnel miner The mobile tunnel miner was specially developed for hard rock tunneling. The MTM can excavate any shape of tunnel (rectangular, horse-shoe or circular).
The mobile tunnel miner (MTM) is a flexible and innovative solution for hard rock tunneling.
The MTM is working with the 'undercutting technique,' requiring less cutting forces than with a normal hard rock tunnel boring machine. The machine is equipped with a crawler unit and a gripper system. The walking unit allows the MTM to move without using the crawlers. The MTM is equipped with three, four or eight cutting arms, depending on the size of the tunnel. The muck is transported to the rear of the machine similarly as with a roadheader.
Raise boring For decades raise boring has been an accepted method for the installation of production and ventilation shafts and ore es for mines. It is also a widely used technology in infrastructural projects for tunnel ventilation or surge shaft
HG330-SP – world record holder with 7.1m diameter.
04/02/2014 5:45 AM
Aker Wirth - Tunnel Boring Machines, Raise Boring and Full-Face Sha...
2 of 2
http://www.mining-technology.com/contractors/tunnelling/wirth2
in hydro-electric power projects. Aker Wirth raise boring machines and cutters have been in operation in the hardest rock, up to 700MPa USC. The equipment ranges from 112kW to 600kW installed power, the cutting diameters from 1m to 6m and the boring depths up to 1,300m. Aker Wirth built the world’s largest raise borer, the HG 380 with an operating torque of max. 710kNm. Aker Wirth raise boring machines hold the world record for the largest diameter raise (7.1m) and the longest raise (1,260m).
For large diameter shaft boring, Aker Wirth offers two solutions.
Shaft boring solutions For large diameter shaft boring, Aker Wirth offers two solutions: Blind shaft boring machine (VSB) Shaft reaming machine (SB) In the latter case the excavated muck falls through the pilot hole to a lower level. The pilot hole of 1m-2m diameter can be excavated with a raise boring machine. If a pilot hole is not possible, a blind shaft boring machine needs to be employed, where the excavated material is transported through the shaft to the surface.
Cutters and tools For each of our products Aker Wirth supplies the necessary spare parts and cutter wear parts. The Aker Wirth cutters are strong, wear resistant and have proven their reliability in the field, leading to high production rates and low costs per ton of production.
Details Aker Wirth GmbH Koelner Strasse 71- 73 Erkelenz 41812 : Ms Martina Rohe Tel: +49 2431 83 358 Fax: +49 2431 83 455 Email: [email protected] URL: www.akersolutions.com/akerwirth URL: www.wirth-europe.com
04/02/2014 5:45 AM
Related Documents 3h463d
Aker Wirth - Tunnel Boring Machines, Raise Boring And Full-face Shaft Boring Machines - Mining Technology.pdf 6r6lx
December 2019 30
Tunnel Boring Laser Machines 491r1y
November 2019 45
Boring And Jig Boring Machine 5g5r5t
November 2019 84
Raise Boring En Australia 57726p
December 2019 56
Raise Boring (2) c1u26
November 2020 0
April 2022 0