Arpeco Tracker e3c5n

65" (1651 mm)

42.5" (1080 mm) Ø18" (457 mm) REWIND

32.75" (832 mm)

Ø27" (686 mm) UNWIND

16.75" (425.45 mm)

or Do

0.0000

43.255" (1099 mm)

27.625" (700 mm)

4.5" (114 mm)

43" (1092 mm)

ing en Op

Score Cut Unit Adjustment Knob Projection

103" (2616 mm)Optional

SPECIFICATIONS Web Width:

13” / 330 mm

Standard Size Pneumatic Shafts: Unwind & Rewind - 3” / 76.2 mm AC Motor Drive:

TRACKER

9.625" (245 mm) AIR SUPPLY

26.245" (667 mm)

3 HP

Maximum Diameter on Unwind: 27” / 686 mm Maximum Diameter on Rewind: 18” / 457 mm Maximum Machine Speed:

750 Ft / 228 m) per minute (Dependent on web type and conditions)

Electrical:

220 V., Single or Three Phase, 50/60 Hz., 20 amps (Optional 400 V.)

Air:

80 – 100 p.s.i., (5 – 7 bars) Nominal Consumption

Dimensions (L x D x H):

103” / 2616 mm x 46” / 1168 mm x 65” / 1651 mm

Weight:

Approx. 1600 lbs. / 726 kgs. ARPECO division of PRECISION AUTOMATION CO., INC.

1495 BONHILL ROAD, MISSISSAUGA, ONTARIO L5T 1M2 CANADA TEL: 905-564-5150 – FAX: 905-564-2943 – SALES & SERVICE: 888-254-7771; www.arpeco.com

THE ARPECO TRACKER® In 1968, Arpeco designed and introduced to label printers and converters, the world’s first off-line inspection, slitting, rewinding machine, patented and ed as the Tracker®. With several thousand machines in the Tracker family installed and operating worldwide, Arpeco continues to upgrade the features and options, offering leading printers and converters accuracy, consistency and reliability.

Web Advance Unit

With the addition of selected options, you can visually inspect the web, electronically check for unremoved matrix, missing labels, millsplices or press flags, count die-cut labels as well as select alternate slitting methods or a range of productivity enhancing features. Optional extras available are: • Hydraulic unwind roll lift • Stroboscopes • Flag / Millsplice and Matrix & Missing Label detection • Label count (optical and capacitive) • Motor-driven waste rewind • Score, Razor and Lineal Die slitting • Trim extraction • Web Advance Unit with pivot-retraction to allow full 18” rewind capacity • Automatic open-loop unwind and rewind tension compensation • Flanged shafts and adaptors

Stroboscope

The Tracker in its base configuration is fully capable of handling your slitting and rewinding tasks while providing accurate length and repeat counting. Standard features of the Tracker include: • • • • Easy Access Nip Roller

• • • • • • •

Easy to adjust Shear Knives

Rigid frame construction with “precision ground” steel main plate Electronic single-edge web guide (suitable for opaque and clear materials) Linear and butt-cut counting (with slowdown and stop) Operator selectable roll-end slowdown (without use of roll-followers or external sensors) Pneumatic brake and clutch 3-inch / 76mm pneumatic unwind & removable flangemount rewind shafts Cast drawhead with easy-access nip roller Shear slitting Heavy-duty quadrant with hard / soft roll and inside / outside wrap rewind selection Large 103-inch / 2616mm inspection table Master roll and adjustable fault-editing splice positions c/w interlocked pneumatic web clamps

The newest Tracker incorporates the latest in machine control and is packaged to be cost effective and Flag/Splice, MMLD Flanged Shafts & Adaptors CE compliant. Simple to use and understand machine motion controls are mounted at the front of the machine and a touch screen operator interface provides job specific settings and displays machine conditions. Extensive use of internationally recognized symbols, together with multi-lingual capability makes operator use and training easy. Features and Benefits • Inspection oriented web path

Provides a clear view of all aspects of the web to maximize roll quality

•

Operator interface

Access to key machine functions and display of counter values and machine status messages

•

Multi-lingual

Extensive use of symbols and multi-lingual simplifies operator use and training

•

Operator selectable roll-end slowdown

No roll-followers or external sensors to be adjusted or maintained

•

CE Compliant

Electrical and mechanical systems are physically isolated simplifying maintenance

•

Open web path at rewind

Easy access to top and bottom shear knives without breaking the web

•

Wide range of inspection and slitting options

MMLD, Flag/Splice, strobe, multiple slitting methods and many options can be added now or retrofit later

THE ARPECO TRACKER® In 1968, Arpeco designed and introduced to label printers and converters, the world’s first off-line inspection, slitting, rewinding machine, patented and ed as the Tracker®. With several thousand machines in the Tracker family installed and operating worldwide, Arpeco continues to upgrade the features and options, offering leading printers and converters accuracy, consistency and reliability.

Web Advance Unit

With the addition of selected options, you can visually inspect the web, electronically check for unremoved matrix, missing labels, millsplices or press flags, count die-cut labels as well as select alternate slitting methods or a range of productivity enhancing features. Optional extras available are: • Hydraulic unwind roll lift • Stroboscopes • Flag / Millsplice and Matrix & Missing Label detection • Label count (optical and capacitive) • Motor-driven waste rewind • Score, Razor and Lineal Die slitting • Trim extraction • Web Advance Unit with pivot-retraction to allow full 18” rewind capacity • Automatic open-loop unwind and rewind tension compensation • Flanged shafts and adaptors

Stroboscope

The Tracker in its base configuration is fully capable of handling your slitting and rewinding tasks while providing accurate length and repeat counting. Standard features of the Tracker include: • • • • Easy Access Nip Roller

• • • • • • •

Easy to adjust Shear Knives

Rigid frame construction with “precision ground” steel main plate Electronic single-edge web guide (suitable for opaque and clear materials) Linear and butt-cut counting (with slowdown and stop) Operator selectable roll-end slowdown (without use of roll-followers or external sensors) Pneumatic brake and clutch 3-inch / 76mm pneumatic unwind & removable flangemount rewind shafts Cast drawhead with easy-access nip roller Shear slitting Heavy-duty quadrant with hard / soft roll and inside / outside wrap rewind selection Large 103-inch / 2616mm inspection table Master roll and adjustable fault-editing splice positions c/w interlocked pneumatic web clamps

The newest Tracker incorporates the latest in machine control and is packaged to be cost effective and Flag/Splice, MMLD Flanged Shafts & Adaptors CE compliant. Simple to use and understand machine motion controls are mounted at the front of the machine and a touch screen operator interface provides job specific settings and displays machine conditions. Extensive use of internationally recognized symbols, together with multi-lingual capability makes operator use and training easy. Features and Benefits • Inspection oriented web path

Provides a clear view of all aspects of the web to maximize roll quality

•

Operator interface

Access to key machine functions and display of counter values and machine status messages

•

Multi-lingual

Extensive use of symbols and multi-lingual simplifies operator use and training

•

Operator selectable roll-end slowdown

No roll-followers or external sensors to be adjusted or maintained

•

CE Compliant

Electrical and mechanical systems are physically isolated simplifying maintenance

•

Open web path at rewind

Easy access to top and bottom shear knives without breaking the web

•

Wide range of inspection and slitting options

MMLD, Flag/Splice, strobe, multiple slitting methods and many options can be added now or retrofit later

65" (1651 mm)

42.5" (1080 mm) Ø18" (457 mm) REWIND

32.75" (832 mm)

Ø27" (686 mm) UNWIND

16.75" (425.45 mm)

or Do

0.0000

43.255" (1099 mm)

27.625" (700 mm)

4.5" (114 mm)

43" (1092 mm)

ing en Op

Score Cut Unit Adjustment Knob Projection

103" (2616 mm)Optional

SPECIFICATIONS Web Width:

13” / 330 mm

Standard Size Pneumatic Shafts: Unwind & Rewind - 3” / 76.2 mm AC Motor Drive:

TRACKER

9.625" (245 mm) AIR SUPPLY

26.245" (667 mm)

3 HP

Maximum Diameter on Unwind: 27” / 686 mm Maximum Diameter on Rewind: 18” / 457 mm Maximum Machine Speed:

750 Ft / 228 m) per minute (Dependent on web type and conditions)

Electrical:

220 V., Single or Three Phase, 50/60 Hz., 20 amps (Optional 400 V.)

Air:

80 – 100 p.s.i., (5 – 7 bars) Nominal Consumption

Dimensions (L x D x H):

103” / 2616 mm x 46” / 1168 mm x 65” / 1651 mm

Weight:

Approx. 1600 lbs. / 726 kgs. ARPECO division of PRECISION AUTOMATION CO., INC.

1495 BONHILL ROAD, MISSISSAUGA, ONTARIO L5T 1M2 CANADA TEL: 905-564-5150 – FAX: 905-564-2943 – SALES & SERVICE: 888-254-7771; www.arpeco.com