Aspen Engineering V8.8 Quick Install Guide 431g6b

Aspen Engineering Suite V8.8 Quick Installation Guide

© 2015 Aspen Technology, Inc. AspenTech®, aspenONE®, the Aspen leaf logo, the aspenONE logo, and OPTIMIZE are trademarks of Aspen Technology, Inc. All rights reserved. Informatica and PowerCenter are ed trademarks of Informatica Corporation in the United States and jurisdictions throughout the world. All other trademarks are property of their respective owners

Quick Install Guide

Minimum Requirements This section provides minimum hardware and software requirements for the Aspen Engineering Suite of products. For more detailed information, refer to the Aspen Engineering Suite Installation Guide and the following web site. http://www.aspentech.com//Aspen-Deployment-Solutions/ Desktop System Requirements Computer and Processor: Intel Core-i5 family 2.8 gigahertz (GHz) or faster Memory (RAM): 8 GB 1/2 Free Hard Disk Space: 80 GB 1 Display: Graphics card / monitor s 1280 x 1024 or higher resolution Network: 100 MB/second Server System Requirements Computer and Processor: Dual Intel Wolfdale-DP family 2.66 gigahertz (GHz) (4 cores) or faster 3/4 Memory: 16 GB or more 3/4 Free Hard Disk Space: 300 GB 3/4 Display: Graphics card / monitor s 1280 x 800 or higher resolution Network: 100 MB/second or above, Gigabyte network recommended. Notes For desktops with PIMS, 16 GB of RAM and 250 GB of free hard disk space are recommended. a 32-bit Windows 7 system, the operating system cannot use more than 4GB of RAM. 64-bit systems are recommended. 3 For standalone deployments of Engineering products, the following is sufficient: Intel Core-i5 family 2.8 gigahertz (GHZ) or faster, 8 GB of RAM, and 150 GB of free hard disk space. 4 For aspenONE Server and Aspen Properties Enterprise Server, the following is recommended: Quad Intel Wolfdale-DP family 2.66 GHZ (8 cores) or faster, 32 GB of RAM, and 500 GB free hard disk space.  SLM (Software License Manager), AFW (Aspen Framework Security), and Infrastructure machines follow the same hardware requirements as Engineering.  When running software on a virtual machine, the machine should meet the same requirements as shown above. 1

2 On

2

Quick Install Guide

V8.8 ed Desktop Platforms ed Operating Systems Windows 8.1 Update Professional and Enterprise (64-bit) Windows 7 SP1 Professional and Enterprise (32- and 64-bit) AspenTech recommends using a 64-bit Operating System for Activated Engineering, RefSYS Refinery Reactors, and working with large models. For more information, please refer to the product installation guides. Aspen Plus Refinery Reactors and Process Manuals do not Windows 8.1 If FIPS is enabled, aspenONE Exchange s must have the latest Windows Update patches installed on their machine.

ed Microsoft Office Microsoft Office 2010 SP2 or 2013 SP1 (32-bit) (Except Aspen Plus Refinery Reactors)

Required Runtimes .NET Framework 4.5 .NET Framework 3.5 (for SLM) Java JRE 1.6 (Only required for Economic Evaluation) Flash 10 (Required for Exchange training videos) Visual Studio Tools for Office 2010 (Required for Aspen Batch Process Developer) The V8.8 aspenONE Engineering suite consists of the following products: Aspen Plus family, Aspen HYSYS family, Aspen Exchanger Design & Rating (EDR), Aspen Economic Evaluation (EE), Aspen Basic Engineering (ABE), aspenONE Web Server, and aspenONE Exchange.

V8.8 ed Server Platforms ed Operating Systems Windows Server 2012 R2 Windows Server 2008 R2 SP1 Aspen Plus Refinery Reactors and Process Manuals do not Windows 2012 R2. If FIPS is enabled, aspenONE Exchange s must have the latest Windows Update patches installed on their machine. If using aspenONE Exchange on Windows Server 2012 R2, you must select the Desktop Experience option during Windows installation to enable Flash training videos.

Required Runtimes .NET Framework 4.5 .NET Framework 3.5 (for SLM) Java JDK 1.6 (Only required for Economic Evaluation and aspenONE Web Server) Flash 10 (Required for Exchange training videos)

Installing Aspen Engineering Products To begin an installation, insert the Engineering DVD into your DVD drive. Alternatively, DVD content can be shared from a network server. To install the AspenTech Engineering products, if:

autorun is enabled, the Welcome screen appears. autorun is not enabled, navigate to your DVD drive or network server and double-click setup.exe The following table lists and provides a brief description of the installation screens in the order in which they appear during the installation.

1

Installation Screen

Description

Welcome to the Aspen Engineering V8.8 Installer

Includes links to the Install Guides and Release Notes on the DVD, as well as links to the Aspen Update Center and Customer Site pages. The main area of the Welcome screen contains icons and links for four Install workflows. The first two workflows are for installing new products or upgrading/repairing existing products on an individual desktop system. To install a product for the first time, select Install aspenONE Products. The majority of Engineering products coexistence, and as a result new versions of products can be installed on the same machine as previous product versions. To upgrade from a previous release, select Upgrade or repair existing products. If there are updates available for the older products on the system, the Update Center prompts you for any available updates. (See Step 1a below.) Select Prepare Deployments to create a script that you can use for silent installs. Select Install and Configure SLM (Software License Manager) Server to install and configure

an SLM server running on a server system; should be used only by IT groups and s.

1a

aspenONE Product Updates (optional)

The Upgrade or repair existing products option is active if any previous installation of aspen products or system files is detected. If you start a new install and you are prompted that “previous versions are detected” you should accept the option to proceed to “Upgrade or repair existing products” before you install the new ones. If you decline, your new products will be installed, but you will still have to return to the installer to upgrade the existing products. If updates are available, the Welcome screen initially displays the Update Center. Click View Patches. The aspenONE Product Updates screen appears. You can either choose to install all of the patches at this time, or you can return to the regular installation and install patches later. When all patches are applied to products on the system, you return to the Welcome screen where you can install new Engineering products and versions. (See Step 1 above.)

3

Prerequisite validation

Verifies that all prerequisite software is installed. If there is missing software, you must install it. In many instances, you can install the software without canceling the Aspen installation.

4

Choose the aspenONE products you want to install

Select the products you want to install. If you select Process Modeling (Aspen HYSYS), Aspen Plus is also installed. You can select Process Modeling (Aspen Plus) if you only want to install Aspen Plus.

File Location

When you select a top-level product, many of the subcomponents are also selected. For some products you can uncheck a subcomponent. When you select a product or subcomponent, a description appears on the right side of the screen. Use the File Location tab to specify where to install the Aspen products. 5

License Security

Enter the name of the SLM Server to be used by the installed applications.

6

Aspen Basic Engineering Server Configuration

Used to configure the Broker Service for Aspen Basic Engineering.

7

aspenONE Drive (Optional)

Used to configure aspenONE Drive. aspenONE Drive is used with Aspen Plus and Aspen HYSYS to collaborate and share models with colleagues. If you do not specify an aspenONE Drive during installation, s will be prompted for the URL when they use aspenONE Drive in Aspen Plus or Aspen HYSYS.

8

Windows Service Used to provide domain information for Windows Services.

9

aspenONE Enterprise Server Database Configuration

Used to provide the SQL server instance to use.

10

your installation

After you select the products to install and provide information for the installation, you can view and the products you select. You can go back to previous screens to make changes.

11

aspenONE installation progress

Progress bars for the overall install and for each individual product install appear while your products are being installed.

12

aspenONE installation complete

If patches are available for some products previously installed on the system and you have not updated these patches in the beginning of the install workflow, you are prompted to install patches again. In this case, click View Patches.

13

Reboot

If your system must be restarted for any product you installed, you can use Reboot to start the machine. You can also use Automatically launch aspenONE Update Agent after rebooting the computer to update products with current patches.