Blocking Mikrotik From Scan Winbox And Neighbor 214770

Blocking Mikrotik from Scan Winbox and Neighbor Sometimes the ISP or service provider is not too keen to protect their customer. Especially when the router protects customers who use RouterOS ™. By running IP>> Neighbor we can see the other mikrotik router physically connected to our router via our provider network. For that we can protect it with a variety of ways such as blocking scan of Winbox and our neighbor. Here is the easiest way: @mikrotik] interface bridge> filter print Flags: X – disabled, I – invalid, D – dynamic 0 ;;; block discovery mikrotik chain=forward in-interface=ether1 mac-protocol=ip dst-port=5678 ip-protocol=udp action=drop 1 ;;; block discovery mikrotik chain=input in-interface=ether1 mac-protocol=ip dst-port=5678 ip-protocol=udp action=drop 2 ;;; block discovery mikrotik chain=output mac-protocol=ip dst-port=5678 ip-protocol=udp action=drop 3 ;;; block discovery mikrotik chain=input in-interface=ether1 mac-protocol=ip dst-port=8291 ip-protocol=t action=drop 4 ;;; block winbox mikrotik chain=forward in-interface=ether1 mac-protocol=ip dst-port=8291 ip-protocol=t action=drop 5 ;;; block request DH chain=input mac-protocol=ip dst-port=68 ip-protocol=udp action=drop

6 ;;; block request DH chain=forward mac-protocol=ip dst-port=68 ip-protocol=udp action=drop 7 ;;; block request DH chain=output mac-protocol=ip dst-port=68 ip-protocol=udp action=drop With this command we can close some scans mainly using Winbox and ip neighbor. Port above is part of the share RouterOS is the need for monitoring. credit : tutorial.multisolusi.com