Cam Vice 4x415d

DESIGN AND FABRICATION OF CAM VICE SYNOPSIS This project deals with the design and fabrication of “CAM VICE” which weeks in the principle or eccentric cam mechanism. The main features of the cam vice re promotes mass production can hold irregular jobs more rigidity, reduces fatigue. Cam was designed to hold the job a high pressure. The other parts were designed to hold he job in rigid condition. Cam vice is suitable for mass production. It is possible to held irregular components also and similar components can be very quickly.

INTRODUCTION Cam vice is one of the clamping devices used to hold the job is rigid condition.

Can vice is operated by the eccentric cam

mechanism. There is a cam lever, the job can be held tightly in between the jaws. In this, first the job is place in between jaws, and movable jaw, and movable jaw is adjusted by adjusting the screw rod to mairtain according to the eccentricity of the cam with the cam profile. After than cam lever at the top is operated so that the job is held tightly in the fixture.