Ccna 4 Chapter 5 V4 74p6d
This document was ed by and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this report form. Report 3i3n4
Overview 26281t
& View Ccna 4 Chapter 5 V4 as PDF for free.
More details 6y5l6z
- Words: 2,988
- Pages: 14
7/11/2014
CCNA 4 Chapter 5 V4.0 Answers | CCNA Answers - CCNA Exam - CCNA Exams
CCNA Answers – CCNA Exam – CCNA Exams CCNA Exam Answers, CCNA Final Exam Answers, CCNA Module Answers, CCNA Chapter Answers, CCNA Test Answers, CCNA Questions and Answers, CCNA 1 Answers, CCNA 2 Answers, CCNA 3 Answers, CCNA 4 Answers, CCNA v4 Answers Home About VLSM Calculator CCNA Forums ► Cisco CCNA Test
► CCNA Exam
► Cisco Exam
► CCNA Answers
CCNA 4 Chapter 5 V4.0 Answers Posted in CCNA 4 - Accessing the WAN (V4.0) - 25 October 2010 - 12 comments - 136,498 views 1. The following commands were entered on a router: Router(config)# access-list 2 deny 172.16.5.24 Router(config)# access-list 2 permit any The ACL is correctly applied to an interface. What can be concluded about this set of commands? The wildcard mask 0.0.0.0 is assumed. The access list statements are misconfigured. All nodes on the 172.16.0.0 network will be denied access to other networks. No traffic will be allowed to access any nodes or services on the 172.16.0.0 network.
2. Interface s0/0/0 already has an IP ACL applied inbound. What happens when the network attempts to apply a second inbound IP ACL? The second ACL is applied to the interface, replacing the first. Both ACLs are applied to the interface. The network receives an error. Only the first ACL remains applied to the interface.
http://ccnaanswers.com/ccna-4-chapter-5-v4-0-answers/
1/14
7/11/2014
CCNA 4 Chapter 5 V4.0 Answers | CCNA Answers - CCNA Exam - CCNA Exams
3. Which two statements are correct about extended ACLs? (Choose two) Extended ACLs use a number range from 1-99. Extended ACLs end with an implicit permit statement. Extended ACLs evaluate the source and destination addresses. Port numbers can be used to add greater definition to an ACL. Multiple ACLs can be placed on the same interface as long as they are in the same direction.
4. Which benefit does an extended ACL offer over a standard ACL? Extended ACLs can be named, but standard ACLs cannot.
Unlike standard ACLs, extended ACLS can be applied in the inbound or outbound direction. Based on payload content, an extended ACL can filter packets, such as information in an e-mail or instant message. http://ccnaanswers.com/ccna-4-chapter-5-v4-0-answers/
2/14
7/11/2014
CCNA 4 Chapter 5 V4.0 Answers | CCNA Answers - CCNA Exam - CCNA Exams
In addition to the source address, an extended ACL can also filter on destination address, destination port, and source port.
5.
Refer to the exhibit. How will Router1 treat traffic matching the time-range requirement of EVERYOTHERDAY? T traffic entering fa0/0 from 172.16.1.254/24 destined to the 10.1.1.0/24 network is permitted. T traffic entering fa0/0 from 10.1.1.254/24 destined to the 172.16.1.0/24 network is permitted. Telnet traffic entering fa0/0 from 172.16.1.254/24 destined to the 10.1.1.0/24 network is permitted. Telnet traffic entering fa0/0 from 10.1.1.254/24 destined to the 172.16.1.0/24 network is permitted.
6. Which three statements describe ACL processing of packets? (Choose three.) An implicit deny any rejects any packet that does not match any ACL statement. A packet can either be rejected or forwarded as directed by the statement that is matched. A packet that has been denied by one statement can be permitted by a subsequent statement. A packet that does not match the conditions of any ACL statements will be forwarded by default. Each statement is checked only until a match is detected or until the end of the ACL statement list. Each packet is compared to the conditions of every statement in the ACL before a forwarding decision is made.
7.
http://ccnaanswers.com/ccna-4-chapter-5-v4-0-answers/
3/14
7/11/2014
CCNA 4 Chapter 5 V4.0 Answers | CCNA Answers - CCNA Exam - CCNA Exams
Refer to the exhibit. The wishes to block web traffic from 192.168.1.50 from reaching the default port of the web service on 192.168.3.30. To do this, the access control list name is applied inbound on the router R1 LAN interface. After testing the list, the has noted that the web traffic remains successful. Why is web traffic reaching the destination? Web traffic does not use port 80 by default. The access list is applied in the wrong direction. The access list needs to be placed closer to the destination, on R3. The range of source addresses specified in line 10 does not include host 192.168.1.50.
8. Which feature will require the use of a named ACL rather than a numbered ACL? the ability to filter traffic based on a specific protocol the ability to filter traffic based on an entire protocol suite and destination the ability to specify source and destination addresses to use when identifying traffic the ability to edit the ACL and add additional statements in the middle of the list without removing and re-creating the list
9. Which two statements are true regarding the significance of the access control list wildcard mask 0.0.0.7? (Choose two.) The first 29 bits of a given IP address will be ignored. The last 3 bits of a given IP address will be ignored. http://ccnaanswers.com/ccna-4-chapter-5-v4-0-answers/
4/14
7/11/2014
CCNA 4 Chapter 5 V4.0 Answers | CCNA Answers - CCNA Exam - CCNA Exams
The first 32 bits of a given IP address will be checked. The first 29 bits of a given IP address will be checked. The last 3 bits of a given IP address will be checked.
10. Where should a standard access control list be placed? close to the source close to the destination on an Ethernet port on a serial port
11. How do Cisco standard ACLs filter traffic? by destination UDP port by protocol type by source IP address by source UDP port by destination IP address
12. Which two statements are true regarding named ACLs? (Choose two.) Only named ACLs allow comments. Names can be used to help identify the function of the ACL. Named ACLs offer more specific filtering options than numbered ACLs. Certain complex ACLs, such as reflexive ACLs, must be defined with named ACLs. More than one named IP ACL can be configured in each direction on a router interface.
13.
http://ccnaanswers.com/ccna-4-chapter-5-v4-0-answers/
5/14
7/11/2014
CCNA 4 Chapter 5 V4.0 Answers | CCNA Answers - CCNA Exam - CCNA Exams
Refer to the exhibit. What will be the effect of the configuration that is shown? s attempting to access hosts in the 192.168.30.0/24 network will be required to telnet to R3. Hosts connecting to resources in the 191.68.30.0/24 network have an idle timeout of 15 minutes. Anyone attempting to telnet into R3 will have an absolute time limit of five minutes. Telnet access to R3 will only be permitted on Serial 0/0/1.
14.
Refer to the exhibit. An has configured two access lists on R1. The list inbound on the serial interface is named http://ccnaanswers.com/ccna-4-chapter-5-v4-0-answers/
6/14
7/11/2014
CCNA 4 Chapter 5 V4.0 Answers | CCNA Answers - CCNA Exam - CCNA Exams
Serial and the list inbound on the LAN interface is named LAN. What affect will be produced by the access control lists? PC1 will be able to telnet to PC3. R3 will not be able to communicate with PC1 and PC3. PC3 cannot telnet to R3 and cannot communicate with PC1. PC1 will not be able to telnet to R3 and PC3 will not be able to communicate with PC1.
15. Which two statements are true regarding the following extended ACL? (Choose two.) access-list 101 deny t 172.16.3.0 0.0.0.255 any eq 20 access-list 101 deny t 172.16.3.0 0.0.0.255 any eq 21 access-list 101 permit ip any any FTP traffic originating from network 172.16.3.0/24 is denied. All traffic is implicitly denied. FTP traffic destined for the 172.16.3.0/24 network is denied. Telnet traffic originating on network 172.16.3.0/24 is denied. Web traffic originating from 172.16.3.0 is permitted.
16. Which statement about standard ACLs is true? Standard ACLS must be numbered and cannot be named. They should be placed as close to the destination as possible. They can filter based on source and destination address as well as on source and destination port. When applied to an outbound interface, incoming packets are processed before they are routed to the outbound interface.
17.
Refer to the exhibit. Which statement is true about ACL 110 if ACL 110 is applied in the inbound direction on S0/0/0 of R1? http://ccnaanswers.com/ccna-4-chapter-5-v4-0-answers/
7/14
7/11/2014
CCNA 4 Chapter 5 V4.0 Answers | CCNA Answers - CCNA Exam - CCNA Exams
It will deny T traffic to the Internet if the traffic is sourced from the 172.22.10.0/24 network. It will not allow T traffic coming from the Internet to enter the network 172.22.10.0/24. It will allow any T traffic from the Internet to enter the network 172.22.10.0/24. It will permit any T traffic that originated from network 172.22.10.0/24 to return inbound on the S0/0/0 interface.
18. Which three parameters can ACLs use to filter traffic? (Choose three.) packet size protocol suite source address destination address source router interface destination router interface
19.
Refer to the exhibit. How does this access list process a packet with the source address 10.1.1.1 and a destination of 192.168.10.13? It is allowed because of the implicit deny any. It is dropped because it does not match any of the items in the ACL. It is allowed because line 10 of the ACL allows packets to 192.168.0.0/16. It is allowed because line 20 of the ACL allows packets to the host 192.168.10.13.
20. By default, how is IP traffic filtered in a Cisco router? blocked in and out of all interfaces blocked on all inbound interfaces, but permitted on all outbound interfaces permitted in and out of all interfaces blocked on all outbound interfaces, but permitted on all inbound interfaces
http://ccnaanswers.com/ccna-4-chapter-5-v4-0-answers/
8/14
7/11/2014
CCNA 4 Chapter 5 V4.0 Answers | CCNA Answers - CCNA Exam - CCNA Exams
21.
Refer to the exhibit. When creating an extended ACL to deny traffic from the 192.168.30.0 network destined for the Web server 209.165.201.30, where is the best location for applying the ACL? ISP Fa0/0 outbound R2 S0/0/1 inbound R3 Fa0/0 inbound R3 S0/0/1 outbound
22.
Refer to the exhibit. ACL 120 is configured inbound on the serial0/0/0 interface on router R1, but the hosts on network 172.11.10.0/24 are able to telnet to network 10.10.0.0/16. On the basis of the provided configuration, what should be done to http://ccnaanswers.com/ccna-4-chapter-5-v4-0-answers/
9/14
7/11/2014
CCNA 4 Chapter 5 V4.0 Answers | CCNA Answers - CCNA Exam - CCNA Exams
remedy the problem? Apply the ACL outbound on the serial0/0/0 interface on router R1. Apply the ACL outbound on the FastEthernet0/0 interface on router R1. Include the established keyword at the end of the first line in the ACL. Include a statement in the ACL to deny the UDP traffic that originates from 172.11.10.0/24 network.
23. A network needs to allow traffic through the firewall router for sessions that originate from within the company network, but the must block traffic for sessions that originate outside the network of the company. What type of ACL is most appropriate? dynamic port-based reflexive time-based
24. A technician is creating an ACL and needs a way to indicate only the subnet 172.16.16.0/21. Which combination of network address and wildcard mask will accomplish the desired task? 172.16.0.0 0.0.255.255 127.16.16.0 0.0.0.255 172.16.16.0 0.0.7.255 172.16.16.0 0.0.15.255 172.16.16.0 0.0.255.255
25. Which three items must be configured before a dynamic ACL can become active on a router? (Choose three.) extended ACL reflexive ACL console logging authentication Telnet connectivity with a privilege level of 15 ccna 4 chapter 5, ccna 4 chapter 5 answers, refer to the exhibit how can a comment be added to the beginning of this acl to http://ccnaanswers.com/ccna-4-chapter-5-v4-0-answers/
10/14
7/11/2014
CCNA 4 Chapter 5 V4.0 Answers | CCNA Answers - CCNA Exam - CCNA Exams
identify its purpose?, ccna4 chapter 5, Refer to the exhibit An has configured two access lists on R1 The list inbound on the serial interface is named Serial and the list inbound on the LAN interface is named LAN What affect will be produced by the access control lists?, Ccna 4 chapter 5 exam answers, Which two statements are true about creating and applying access lists? (Choose two ), Where should a standard access control list be placed?, by default how is ip traffic filtered in a cisco router, Refer to the exhibit How will Router1 treat traffic matching the time-range requirement of EVERYOTHERDAY? Tags: Accessing the WAN Chapter 5 Answers, CCNA 4, CCNA 4 Module 5 Answers 2010, CCNA Exploration 4 Chapter 5 Answers, CCNA Exploration 4 Module 5 Exam Answers, CCNA Module 5 Answers, CCNA4 Chapter5, Cisco CCNA 4 Chapter 5 Exam Answers 12 Responses - Add Yours+
1.
Organic SEO says: January 8, 2011 at 10:11 am Very much informative post. I like it. Thanks for sharing in the web. Reply
2.
joynoy says: April 18, 2011 at 7:20 pm 100% confirmed Reply
3.
vvv says: May 9, 2012 at 5:26 am Q 22 answere is Apply the ACL outbound on the FastEthernet0/0 interface on router R1 Reply Mat says: June 4, 2012 at 9:08 pm Wrong, would of been ok if it was Inbound. The right answer is : Apply the ACL outbound on the serial0/0/0 interface on router R1. Reply Bonn says: August 7, 2012 at 3:09 am Mat, u’re right Reply
4.
etf says:
http://ccnaanswers.com/ccna-4-chapter-5-v4-0-answers/
11/14
7/11/2014
CCNA 4 Chapter 5 V4.0 Answers | CCNA Answers - CCNA Exam - CCNA Exams
November 11, 2012 at 2:48 pm one more Q: – Refer to the exhibit. How can a comment be added to the beginning of this ACL to identify its purpose? Answer: Recreate the ACL and use the remark command to add a remark to the beginning of the ACL. Reply enjoy yourself says: April 6, 2013 at 8:05 am excuse me, but if this is a named acl, why do i have to recreate the acl? i that named acl can be edited… Reply J says: May 28, 2013 at 10:25 am that is only enabled in a later ios image Reply MaD says: July 30, 2013 at 2:30 pm “Recreate the ACL and use the remark command to add a remark to the beginning of the ACL” is definitely the correct answer Reply 5.
prime says: November 15, 2013 at 8:15 pm Q how to enter a comment to an ACL list was not shown here I put use the remark command but that was wrong, any insight? Reply
6.
RacerR6 says: March 31, 2014 at 5:04 pm update 2013 Which two statements are true regarding named ACLs? (Choose two.) Names can be used to help identify the function of the ACL Named ACLs offer more specific filtering options than numbered ACLs Reply RacerR6 says: March 31, 2014 at 5:07 pm Correction:
http://ccnaanswers.com/ccna-4-chapter-5-v4-0-answers/
12/14
7/11/2014
CCNA 4 Chapter 5 V4.0 Answers | CCNA Answers - CCNA Exam - CCNA Exams
Named ACLs offer more specific filtering options than numbered ACLs Wrong Right Certain complex ACLs, such as reflexive ACLs, must be defined with named ACLs. Reply Leave a Reply Name (required) Mail (will not be published) (required) Website
Submit Comment
Categories CCNA 1 – Network Fundamentals (V4.0) (14) CCNA 2 – Routing Protocols and Concepts (V4.0) (13) CCNA 3 – LAN Switching and Wireless (V4.0) (9) CCNA 4 – Accessing the WAN (V4.0) (12) CCNA Discovery 1 – Networking for Home and Small Businesses (V4.0) (10) CCNA Discovery 2 – Working at a Small-to-Medium Business or ISP (Version 4.1) (10) CCNA Discovery 3 – Introducing Routing and Switching in the Enterprise (Version 4.0) (4) CCNA 1 – Networking Basics (V3.1) (13) CCNA 2 – Router and Routing Basics (V3.1) (13) CCNA 3 – Switching Basics and Intermediate Routing (V3.1) (10) CCNA 4 – WAN Technologies (V3.1) (8) Most Views CCNA 1 Final Exam Answers 2011 CCNA 4 Final Exam V4.0 Answers CCNA 1 Final Exam V4.0 Answers CCNA 3 Final Exam V4.0 Answers CCNA 1 Practice Final Exam V4.0 Answers CCNA 2 Final Exam Answers 2012 CCNA 2 Final Exam V4.0 Answers CCNA 1 Chapter 10 V4.0 Answers http://ccnaanswers.com/ccna-4-chapter-5-v4-0-answers/
13/14
7/11/2014
CCNA 4 Chapter 5 V4.0 Answers | CCNA Answers - CCNA Exam - CCNA Exams
CCNA 1 Chapter 11 V4.0 Answers CCNA 1 Chapter 5 V4.0 Answers Tags
CCNA 1
CCNA 1 Practice Final Exam Answers
CCNA 2
CCNA 2 Practice Final Exam Answers
CCNA 3 CCNA 3 Practice
CCNA 4 CCNA 4 Practice Final Exam Answers CCNA 2011 CCNA 2012 CCNA Answers 2011 CCNA Answers 2012 CCNA Discovery 1 CCNA Discovery 2 CCNA Discovery 3 CCNA Discovery: Introducing Routing and Switching in the Enterprise (Version 4.0) CCNA Discovery: Networking for Home and Small Businesses (Version 4.0) CCNA Discovery: Working at a Small-to-Medium Business or ISP (Version 4.1) Final Exam Answers
CCNA Exam 2011 CCNA Exam 2012
CCNA Final CCNA Final 2011 CCNA Final 2012 CCNA Module 1 Answers
CCNA Module 2 Answers CCNA Module 3 Answers CCNA Module 4 Answers CCNA Module 5 Answers CCNA Module 6 Answers CCNA Module 7 Answers CCNA Module 8 Answers CCNA Module 9 Answers CCNA Module 10 Answers CCNA Module 11 Answers Cisco CCNA 1 Final Exam Answers Cisco CCNA 2 Final Exam Answers Cisco CCNA 3 Final Exam Answers
Cisco CCNA 4 Final
DRSEnt DsmbISP Exam 2011 Exam 2012 Final Exam LAN Switching and Wireless Final Exam Answers Network Fundamentals Final Exam Answers Exam Answers
CCNA PDF File CCNA Tools CCNA Updated 2011 Recent Posts CCNA Discovery 3 Chapter 4 V4.0 Answers CCNA Discovery 3 Chapter 3 V4.0 Answers CCNA Discovery 3 Chapter 2 V4.0 Answers CCNA Discovery 3 Chapter 1 V4.0 Answers CCNA Discovery 2 Final Exam V4.1 Answers Recent Comments e on CCNA 4 Final Exam V4.0 Answers valkyrie on CCNA 2 Chapter 11 V4.0 Answers valkyrie on CCNA 2 Chapter 11 V4.0 Answers joe on CCNA 4 Final Exam V4.0 Answers Anon on CCNA Discovery 1 Chapter 9 V4.0 Answers Copyright © 2014 CCNA Answers – CCNA Exam – CCNA Exams. Entries (RSS).
http://ccnaanswers.com/ccna-4-chapter-5-v4-0-answers/
14/14
CCNA 4 Chapter 5 V4.0 Answers | CCNA Answers - CCNA Exam - CCNA Exams
CCNA Answers – CCNA Exam – CCNA Exams CCNA Exam Answers, CCNA Final Exam Answers, CCNA Module Answers, CCNA Chapter Answers, CCNA Test Answers, CCNA Questions and Answers, CCNA 1 Answers, CCNA 2 Answers, CCNA 3 Answers, CCNA 4 Answers, CCNA v4 Answers Home About VLSM Calculator CCNA Forums ► Cisco CCNA Test
► CCNA Exam
► Cisco Exam
► CCNA Answers
CCNA 4 Chapter 5 V4.0 Answers Posted in CCNA 4 - Accessing the WAN (V4.0) - 25 October 2010 - 12 comments - 136,498 views 1. The following commands were entered on a router: Router(config)# access-list 2 deny 172.16.5.24 Router(config)# access-list 2 permit any The ACL is correctly applied to an interface. What can be concluded about this set of commands? The wildcard mask 0.0.0.0 is assumed. The access list statements are misconfigured. All nodes on the 172.16.0.0 network will be denied access to other networks. No traffic will be allowed to access any nodes or services on the 172.16.0.0 network.
2. Interface s0/0/0 already has an IP ACL applied inbound. What happens when the network attempts to apply a second inbound IP ACL? The second ACL is applied to the interface, replacing the first. Both ACLs are applied to the interface. The network receives an error. Only the first ACL remains applied to the interface.
http://ccnaanswers.com/ccna-4-chapter-5-v4-0-answers/
1/14
7/11/2014
CCNA 4 Chapter 5 V4.0 Answers | CCNA Answers - CCNA Exam - CCNA Exams
3. Which two statements are correct about extended ACLs? (Choose two) Extended ACLs use a number range from 1-99. Extended ACLs end with an implicit permit statement. Extended ACLs evaluate the source and destination addresses. Port numbers can be used to add greater definition to an ACL. Multiple ACLs can be placed on the same interface as long as they are in the same direction.
4. Which benefit does an extended ACL offer over a standard ACL? Extended ACLs can be named, but standard ACLs cannot.
Unlike standard ACLs, extended ACLS can be applied in the inbound or outbound direction. Based on payload content, an extended ACL can filter packets, such as information in an e-mail or instant message. http://ccnaanswers.com/ccna-4-chapter-5-v4-0-answers/
2/14
7/11/2014
CCNA 4 Chapter 5 V4.0 Answers | CCNA Answers - CCNA Exam - CCNA Exams
In addition to the source address, an extended ACL can also filter on destination address, destination port, and source port.
5.
Refer to the exhibit. How will Router1 treat traffic matching the time-range requirement of EVERYOTHERDAY? T traffic entering fa0/0 from 172.16.1.254/24 destined to the 10.1.1.0/24 network is permitted. T traffic entering fa0/0 from 10.1.1.254/24 destined to the 172.16.1.0/24 network is permitted. Telnet traffic entering fa0/0 from 172.16.1.254/24 destined to the 10.1.1.0/24 network is permitted. Telnet traffic entering fa0/0 from 10.1.1.254/24 destined to the 172.16.1.0/24 network is permitted.
6. Which three statements describe ACL processing of packets? (Choose three.) An implicit deny any rejects any packet that does not match any ACL statement. A packet can either be rejected or forwarded as directed by the statement that is matched. A packet that has been denied by one statement can be permitted by a subsequent statement. A packet that does not match the conditions of any ACL statements will be forwarded by default. Each statement is checked only until a match is detected or until the end of the ACL statement list. Each packet is compared to the conditions of every statement in the ACL before a forwarding decision is made.
7.
http://ccnaanswers.com/ccna-4-chapter-5-v4-0-answers/
3/14
7/11/2014
CCNA 4 Chapter 5 V4.0 Answers | CCNA Answers - CCNA Exam - CCNA Exams
Refer to the exhibit. The wishes to block web traffic from 192.168.1.50 from reaching the default port of the web service on 192.168.3.30. To do this, the access control list name is applied inbound on the router R1 LAN interface. After testing the list, the has noted that the web traffic remains successful. Why is web traffic reaching the destination? Web traffic does not use port 80 by default. The access list is applied in the wrong direction. The access list needs to be placed closer to the destination, on R3. The range of source addresses specified in line 10 does not include host 192.168.1.50.
8. Which feature will require the use of a named ACL rather than a numbered ACL? the ability to filter traffic based on a specific protocol the ability to filter traffic based on an entire protocol suite and destination the ability to specify source and destination addresses to use when identifying traffic the ability to edit the ACL and add additional statements in the middle of the list without removing and re-creating the list
9. Which two statements are true regarding the significance of the access control list wildcard mask 0.0.0.7? (Choose two.) The first 29 bits of a given IP address will be ignored. The last 3 bits of a given IP address will be ignored. http://ccnaanswers.com/ccna-4-chapter-5-v4-0-answers/
4/14
7/11/2014
CCNA 4 Chapter 5 V4.0 Answers | CCNA Answers - CCNA Exam - CCNA Exams
The first 32 bits of a given IP address will be checked. The first 29 bits of a given IP address will be checked. The last 3 bits of a given IP address will be checked.
10. Where should a standard access control list be placed? close to the source close to the destination on an Ethernet port on a serial port
11. How do Cisco standard ACLs filter traffic? by destination UDP port by protocol type by source IP address by source UDP port by destination IP address
12. Which two statements are true regarding named ACLs? (Choose two.) Only named ACLs allow comments. Names can be used to help identify the function of the ACL. Named ACLs offer more specific filtering options than numbered ACLs. Certain complex ACLs, such as reflexive ACLs, must be defined with named ACLs. More than one named IP ACL can be configured in each direction on a router interface.
13.
http://ccnaanswers.com/ccna-4-chapter-5-v4-0-answers/
5/14
7/11/2014
CCNA 4 Chapter 5 V4.0 Answers | CCNA Answers - CCNA Exam - CCNA Exams
Refer to the exhibit. What will be the effect of the configuration that is shown? s attempting to access hosts in the 192.168.30.0/24 network will be required to telnet to R3. Hosts connecting to resources in the 191.68.30.0/24 network have an idle timeout of 15 minutes. Anyone attempting to telnet into R3 will have an absolute time limit of five minutes. Telnet access to R3 will only be permitted on Serial 0/0/1.
14.
Refer to the exhibit. An has configured two access lists on R1. The list inbound on the serial interface is named http://ccnaanswers.com/ccna-4-chapter-5-v4-0-answers/
6/14
7/11/2014
CCNA 4 Chapter 5 V4.0 Answers | CCNA Answers - CCNA Exam - CCNA Exams
Serial and the list inbound on the LAN interface is named LAN. What affect will be produced by the access control lists? PC1 will be able to telnet to PC3. R3 will not be able to communicate with PC1 and PC3. PC3 cannot telnet to R3 and cannot communicate with PC1. PC1 will not be able to telnet to R3 and PC3 will not be able to communicate with PC1.
15. Which two statements are true regarding the following extended ACL? (Choose two.) access-list 101 deny t 172.16.3.0 0.0.0.255 any eq 20 access-list 101 deny t 172.16.3.0 0.0.0.255 any eq 21 access-list 101 permit ip any any FTP traffic originating from network 172.16.3.0/24 is denied. All traffic is implicitly denied. FTP traffic destined for the 172.16.3.0/24 network is denied. Telnet traffic originating on network 172.16.3.0/24 is denied. Web traffic originating from 172.16.3.0 is permitted.
16. Which statement about standard ACLs is true? Standard ACLS must be numbered and cannot be named. They should be placed as close to the destination as possible. They can filter based on source and destination address as well as on source and destination port. When applied to an outbound interface, incoming packets are processed before they are routed to the outbound interface.
17.
Refer to the exhibit. Which statement is true about ACL 110 if ACL 110 is applied in the inbound direction on S0/0/0 of R1? http://ccnaanswers.com/ccna-4-chapter-5-v4-0-answers/
7/14
7/11/2014
CCNA 4 Chapter 5 V4.0 Answers | CCNA Answers - CCNA Exam - CCNA Exams
It will deny T traffic to the Internet if the traffic is sourced from the 172.22.10.0/24 network. It will not allow T traffic coming from the Internet to enter the network 172.22.10.0/24. It will allow any T traffic from the Internet to enter the network 172.22.10.0/24. It will permit any T traffic that originated from network 172.22.10.0/24 to return inbound on the S0/0/0 interface.
18. Which three parameters can ACLs use to filter traffic? (Choose three.) packet size protocol suite source address destination address source router interface destination router interface
19.
Refer to the exhibit. How does this access list process a packet with the source address 10.1.1.1 and a destination of 192.168.10.13? It is allowed because of the implicit deny any. It is dropped because it does not match any of the items in the ACL. It is allowed because line 10 of the ACL allows packets to 192.168.0.0/16. It is allowed because line 20 of the ACL allows packets to the host 192.168.10.13.
20. By default, how is IP traffic filtered in a Cisco router? blocked in and out of all interfaces blocked on all inbound interfaces, but permitted on all outbound interfaces permitted in and out of all interfaces blocked on all outbound interfaces, but permitted on all inbound interfaces
http://ccnaanswers.com/ccna-4-chapter-5-v4-0-answers/
8/14
7/11/2014
CCNA 4 Chapter 5 V4.0 Answers | CCNA Answers - CCNA Exam - CCNA Exams
21.
Refer to the exhibit. When creating an extended ACL to deny traffic from the 192.168.30.0 network destined for the Web server 209.165.201.30, where is the best location for applying the ACL? ISP Fa0/0 outbound R2 S0/0/1 inbound R3 Fa0/0 inbound R3 S0/0/1 outbound
22.
Refer to the exhibit. ACL 120 is configured inbound on the serial0/0/0 interface on router R1, but the hosts on network 172.11.10.0/24 are able to telnet to network 10.10.0.0/16. On the basis of the provided configuration, what should be done to http://ccnaanswers.com/ccna-4-chapter-5-v4-0-answers/
9/14
7/11/2014
CCNA 4 Chapter 5 V4.0 Answers | CCNA Answers - CCNA Exam - CCNA Exams
remedy the problem? Apply the ACL outbound on the serial0/0/0 interface on router R1. Apply the ACL outbound on the FastEthernet0/0 interface on router R1. Include the established keyword at the end of the first line in the ACL. Include a statement in the ACL to deny the UDP traffic that originates from 172.11.10.0/24 network.
23. A network needs to allow traffic through the firewall router for sessions that originate from within the company network, but the must block traffic for sessions that originate outside the network of the company. What type of ACL is most appropriate? dynamic port-based reflexive time-based
24. A technician is creating an ACL and needs a way to indicate only the subnet 172.16.16.0/21. Which combination of network address and wildcard mask will accomplish the desired task? 172.16.0.0 0.0.255.255 127.16.16.0 0.0.0.255 172.16.16.0 0.0.7.255 172.16.16.0 0.0.15.255 172.16.16.0 0.0.255.255
25. Which three items must be configured before a dynamic ACL can become active on a router? (Choose three.) extended ACL reflexive ACL console logging authentication Telnet connectivity with a privilege level of 15 ccna 4 chapter 5, ccna 4 chapter 5 answers, refer to the exhibit how can a comment be added to the beginning of this acl to http://ccnaanswers.com/ccna-4-chapter-5-v4-0-answers/
10/14
7/11/2014
CCNA 4 Chapter 5 V4.0 Answers | CCNA Answers - CCNA Exam - CCNA Exams
identify its purpose?, ccna4 chapter 5, Refer to the exhibit An has configured two access lists on R1 The list inbound on the serial interface is named Serial and the list inbound on the LAN interface is named LAN What affect will be produced by the access control lists?, Ccna 4 chapter 5 exam answers, Which two statements are true about creating and applying access lists? (Choose two ), Where should a standard access control list be placed?, by default how is ip traffic filtered in a cisco router, Refer to the exhibit How will Router1 treat traffic matching the time-range requirement of EVERYOTHERDAY? Tags: Accessing the WAN Chapter 5 Answers, CCNA 4, CCNA 4 Module 5 Answers 2010, CCNA Exploration 4 Chapter 5 Answers, CCNA Exploration 4 Module 5 Exam Answers, CCNA Module 5 Answers, CCNA4 Chapter5, Cisco CCNA 4 Chapter 5 Exam Answers 12 Responses - Add Yours+
1.
Organic SEO says: January 8, 2011 at 10:11 am Very much informative post. I like it. Thanks for sharing in the web. Reply
2.
joynoy says: April 18, 2011 at 7:20 pm 100% confirmed Reply
3.
vvv says: May 9, 2012 at 5:26 am Q 22 answere is Apply the ACL outbound on the FastEthernet0/0 interface on router R1 Reply Mat says: June 4, 2012 at 9:08 pm Wrong, would of been ok if it was Inbound. The right answer is : Apply the ACL outbound on the serial0/0/0 interface on router R1. Reply Bonn says: August 7, 2012 at 3:09 am Mat, u’re right Reply
4.
etf says:
http://ccnaanswers.com/ccna-4-chapter-5-v4-0-answers/
11/14
7/11/2014
CCNA 4 Chapter 5 V4.0 Answers | CCNA Answers - CCNA Exam - CCNA Exams
November 11, 2012 at 2:48 pm one more Q: – Refer to the exhibit. How can a comment be added to the beginning of this ACL to identify its purpose? Answer: Recreate the ACL and use the remark command to add a remark to the beginning of the ACL. Reply enjoy yourself says: April 6, 2013 at 8:05 am excuse me, but if this is a named acl, why do i have to recreate the acl? i that named acl can be edited… Reply J says: May 28, 2013 at 10:25 am that is only enabled in a later ios image Reply MaD says: July 30, 2013 at 2:30 pm “Recreate the ACL and use the remark command to add a remark to the beginning of the ACL” is definitely the correct answer Reply 5.
prime says: November 15, 2013 at 8:15 pm Q how to enter a comment to an ACL list was not shown here I put use the remark command but that was wrong, any insight? Reply
6.
RacerR6 says: March 31, 2014 at 5:04 pm update 2013 Which two statements are true regarding named ACLs? (Choose two.) Names can be used to help identify the function of the ACL Named ACLs offer more specific filtering options than numbered ACLs Reply RacerR6 says: March 31, 2014 at 5:07 pm Correction:
http://ccnaanswers.com/ccna-4-chapter-5-v4-0-answers/
12/14
7/11/2014
CCNA 4 Chapter 5 V4.0 Answers | CCNA Answers - CCNA Exam - CCNA Exams
Named ACLs offer more specific filtering options than numbered ACLs Wrong Right Certain complex ACLs, such as reflexive ACLs, must be defined with named ACLs. Reply Leave a Reply Name (required) Mail (will not be published) (required) Website
Submit Comment
Categories CCNA 1 – Network Fundamentals (V4.0) (14) CCNA 2 – Routing Protocols and Concepts (V4.0) (13) CCNA 3 – LAN Switching and Wireless (V4.0) (9) CCNA 4 – Accessing the WAN (V4.0) (12) CCNA Discovery 1 – Networking for Home and Small Businesses (V4.0) (10) CCNA Discovery 2 – Working at a Small-to-Medium Business or ISP (Version 4.1) (10) CCNA Discovery 3 – Introducing Routing and Switching in the Enterprise (Version 4.0) (4) CCNA 1 – Networking Basics (V3.1) (13) CCNA 2 – Router and Routing Basics (V3.1) (13) CCNA 3 – Switching Basics and Intermediate Routing (V3.1) (10) CCNA 4 – WAN Technologies (V3.1) (8) Most Views CCNA 1 Final Exam Answers 2011 CCNA 4 Final Exam V4.0 Answers CCNA 1 Final Exam V4.0 Answers CCNA 3 Final Exam V4.0 Answers CCNA 1 Practice Final Exam V4.0 Answers CCNA 2 Final Exam Answers 2012 CCNA 2 Final Exam V4.0 Answers CCNA 1 Chapter 10 V4.0 Answers http://ccnaanswers.com/ccna-4-chapter-5-v4-0-answers/
13/14
7/11/2014
CCNA 4 Chapter 5 V4.0 Answers | CCNA Answers - CCNA Exam - CCNA Exams
CCNA 1 Chapter 11 V4.0 Answers CCNA 1 Chapter 5 V4.0 Answers Tags
CCNA 1
CCNA 1 Practice Final Exam Answers
CCNA 2
CCNA 2 Practice Final Exam Answers
CCNA 3 CCNA 3 Practice
CCNA 4 CCNA 4 Practice Final Exam Answers CCNA 2011 CCNA 2012 CCNA Answers 2011 CCNA Answers 2012 CCNA Discovery 1 CCNA Discovery 2 CCNA Discovery 3 CCNA Discovery: Introducing Routing and Switching in the Enterprise (Version 4.0) CCNA Discovery: Networking for Home and Small Businesses (Version 4.0) CCNA Discovery: Working at a Small-to-Medium Business or ISP (Version 4.1) Final Exam Answers
CCNA Exam 2011 CCNA Exam 2012
CCNA Final CCNA Final 2011 CCNA Final 2012 CCNA Module 1 Answers
CCNA Module 2 Answers CCNA Module 3 Answers CCNA Module 4 Answers CCNA Module 5 Answers CCNA Module 6 Answers CCNA Module 7 Answers CCNA Module 8 Answers CCNA Module 9 Answers CCNA Module 10 Answers CCNA Module 11 Answers Cisco CCNA 1 Final Exam Answers Cisco CCNA 2 Final Exam Answers Cisco CCNA 3 Final Exam Answers
Cisco CCNA 4 Final
DRSEnt DsmbISP Exam 2011 Exam 2012 Final Exam LAN Switching and Wireless Final Exam Answers Network Fundamentals Final Exam Answers Exam Answers
CCNA PDF File CCNA Tools CCNA Updated 2011 Recent Posts CCNA Discovery 3 Chapter 4 V4.0 Answers CCNA Discovery 3 Chapter 3 V4.0 Answers CCNA Discovery 3 Chapter 2 V4.0 Answers CCNA Discovery 3 Chapter 1 V4.0 Answers CCNA Discovery 2 Final Exam V4.1 Answers Recent Comments e on CCNA 4 Final Exam V4.0 Answers valkyrie on CCNA 2 Chapter 11 V4.0 Answers valkyrie on CCNA 2 Chapter 11 V4.0 Answers joe on CCNA 4 Final Exam V4.0 Answers Anon on CCNA Discovery 1 Chapter 9 V4.0 Answers Copyright © 2014 CCNA Answers – CCNA Exam – CCNA Exams. Entries (RSS).
http://ccnaanswers.com/ccna-4-chapter-5-v4-0-answers/
14/14
Related Documents 3h463d
Ccna 4 Chapter 5 V4 74p6d
November 2022 0
Ccna 4 Chapter 4 V4 e5o1b
August 2022 0
Ccna 3 Chapter 5 5tp5r
May 2021 0
Ccna V4 Mod 7 1s3v28
November 2019 48
Ccna 4.0 V4 Examen Final Modulo 4 5y2z4s
May 2021 0
Answer Ccna Security Chapter 5 6oz6n
November 2019 47More Documents from "Matthew Hernandez" 6l5a6
Ccna 4 Chapter 5 V4 74p6d
November 2022 0
Como Adestrar Um Cachorro Pdf 1j6x6n
October 2019 159
Miami-dade County Criminal Justice Online 3z6t4h
January 2022 0
Etica Profesional Y Laboral Pdf 6o1s2b
May 2022 0
Free Pro E Wildfire 5 Tutorials Pdf 1k164g
November 2019 135