“DESIGN AND FABRICATION OF UNI DIRECTIONAL OUTPUT FOR BI DIRECTIONAL INPUT OF ROTATING SHAFT” (SPONSORED BY HINDUSTAN ALUMINIUM INDUSTRIES)

A Project report submitted in partial fulfillment of the requirements Of Eighth Semester course in Bachelor of Engineering in Mechanical Engineering of Visvesvaraya Technological University, Belgaum

Submitted by Anirudhwa Roy Talukdar Kidi Salman Rafik Prem Rohan Shashank Upadhyay

2KL08ME013 2KL08ME039 2KL08ME067 2KL08ME094

Under the guidance of

Prof. Nikhil Anigol

DEPARTMENT OF MECHANICAL ENGINEERING K.L.E.SOCIETY’S COLLEGE OF ENGINEERING & TECHNOLOGY UDYAMBAG, BELGAUM-590 008 (ISO 9001:2008 CERTIFIED INSTITUTION)

VISVESVARAYA TECHNOLOGICAL UNIVERSITY, BELGAUM 2011-2012 K.L.E.SOCIETY’S

COLLEGE OF ENGINEERING & TECHNOLOGY UDYAMBAG, BELGAUM-590008 DEPARTMENT OF MECHANICAL ENGINEERING

CERTIFICATE Certified that the Project Work entitled

“DESIGN AND FABRICATION OF UNI DIRECTIONAL OUTPUT FOR BI DIRECTIONAL INPUT OF ROTATING SHAFT” carried out by

Anirudhwa Roy Talukdar Kidi Salman Rafik Prem Rohan Shashank Upadhyay

2KL08ME013 2KL08ME039 2KL08ME067 2KL08ME094

in the partial fulfillment for the Degree of Bachelor of Engineering in Mechanical Engineering of the Visvesvaraya Technological University, Belgaum during the academic year 2011-2012. It is certified that all corrections / suggestions indicated for the internal assessment have been incorporated in the report deposited in departmental library. The project report has been approved as it satisfies the academic requirements in respect of the project work prescribed for the Bachelor of Engineering Degree.

GUIDE Prof. Nikhil Anigol

HOD Prof. S.R. Basavaraddi

PRINCIPAL Dr. S.C. Pilli

Name of the Student: ______________________________ University Seat No : ______________________________ Name of the Examiners 1. ______________________________________ 2.______________________________________

Signature with Date

ACKNOWLEDGEMENT This has been the light of the day due to invaluable contribution of certain individuals whose constant guidance, and encouragement resulted in the realization of our project. We are grateful to our Guide Prof. Nikhil Anigol and HOD of Mechanical Engineering, Prof. S. R. Basavaraddi for providing us the necessary help and encouragement whenever we needed, which has resulted in the success of our project. We take this opportunity to thank Dr. S. C. Pilli, Principal of K.L.E.’s College of Engineering and Technology, Belgaum for providing a healthy environment in the college, which helped us in concentrating on our task. We would also like to thank all the staff of our department, without whose constructive suggestions and valuable advice, the simple idea, which had borne by us, would not have been able to blossom forth to give such a beautiful bloom. Last but not the least, we are grateful to all our friends and our parents for their direct or indirect constant moral throughout the course of this project.

Project Associates Anirudhwa Roy Talukdar Kidi Salman Rafik Prem Rohan Shashank Upadhyay