Checklist For Access Control System Installation 1z3r6k
This document was ed by and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this report form. Report 3i3n4
Overview 26281t
& View Checklist For Access Control System Installation as PDF for free.
More details 6y5l6z
- Words: 870
- Pages: 6
AL DHAFRA TRADING ENTERPRISE EST. OCCUPATIONAL HEALTH, SAFETY MANAGEMENT SYSTEM
Description of Task / Activity:
Supply, Installation, Testing & Commissioning of IP CCTV System.
Project Name:
Musaffah Gardens Building Works.
Site Address/ Location:
Document Reference:
Associated Risk Assessment
MUSAFFAH, ABU DHABI.
N/A
Reference Number Yes
N/A
Prepared By:
Syed Ameeruddin
Position:
Project Engineer
Date:
Attached No
NO
20-01-2016
Client Approval: Position:
Key Plant and Tools Required:
Doc. No. ATC-MS-CAM-R01115-1 Issue: 0
Date:
Electric Cordless Screwdriver, Crimping tool, Cutter, knife, leveller, portable electric hand drill.
Method Statement Template UNCONTROLLED COPY WHEN PRINTED
Page 1 of 6 Date of Issue: 23/11/2014
AL DHAFRA TRADING ENTERPRISE EST. OCCUPATIONAL HEALTH, SAFETY MANAGEMENT SYSTEM
Key Materials Required:
Cameras, Cables
(i.e.: access platforms/winches/ladders etc) Other Essential Equipment:
Ladders
Specific Identified Residual Hazards: (or refer to the task specific risk assessment(s))
N/A
(i.e.: Confined Spaces/Abrasive Wheels/Working at Height/Plant Operators etc)
Specific Staff Training Requirements:
N/A
(If none, state none.)
Temporary s and Props needed to facilitate the works:
Life line if needed or practicable
(i.e.: Ladders/MEWPS/Scaffold/Trestles/Step Ladder etc)
Method of Access and Egress to the work area: Fall Protection Measures: (Where work at height cannot be eliminated - consider both Personnel & Materials)
Hazardous Substances:
Ladder, Scissor Lift
(ie: Guard Rails/Toe Boards/Brick Guards/Safety Harnesses/Exclusion Zones etc) Safety Harness, fall restrain
(ie: Lubricants/Solvents/Flammable Materials/Refrigerants/Welding Gases etc)
(Attach COSHH Assessments and MSDS) Very Toxic
Harmful/ Irritant
Corrosive
Dangerous for the environment
Oxidising
Highly flammable
Explosive
No
No
No
No
No
No
No
Applicable:
(Detail any limits on the loadings applicable to temporary plant/equipment or fixed elements of the structure where the work is taking place.)
SWL's:
Doc. No. ATC-MS-CAM-R01115-1 Issue: 0
NA
Method Statement Template UNCONTROLLED COPY WHEN PRINTED
Page 2 of 6 Date of Issue: 23/11/2014
AL DHAFRA TRADING ENTERPRISE EST. OCCUPATIONAL HEALTH, SAFETY MANAGEMENT SYSTEM
Required Personnel Protective Equip.: Safety Boots
Hard Hats
Safety Gloves
Hearing Protection
Eye Protection
Emergency Procedures:
Name of On-Site First Aider:
Aijaz
First Aid Box Location:
Vehicle
First Aid Facilities:
Location of Nearest Hospital:
[Life Line Hospital]
Other Information & Comments:
Syed Ameeruddin (Proj. Eng.) -0506156932 Aijaz (HSE) -050-6158375 Mohd. Adnan (PM) -0506157714
1) All work will be undertaken by qualified competent persons with experience of the type of work described above, and in all cases in full accordance with safety procedures specified. QUALITY CONTROL PROCEDURES:
2) It is the responsibility of the supervisor to ensure prior to giving any personnel the job of (Camera Installation) that they are fully aware of the hazards involved and are competent to carry out the work safely. 3) The supervisor must ensure that this procedure is fully complied with.
Doc. No. ATC-MS-CAM-R01115-1 Issue: 0
Method Statement Template UNCONTROLLED COPY WHEN PRINTED
Page 3 of 6 Date of Issue: 23/11/2014
AL DHAFRA TRADING ENTERPRISE EST. OCCUPATIONAL HEALTH, SAFETY MANAGEMENT SYSTEM
Testing: Camera function, coverage & quality can be checked from the desktop client software, select the camera & the picture quality.
TESTING & COMMISSIONING:
Commissioning: 1) Ensure all installation works are complete as per approved method statement for installation of CCTV system. 2) Connect IP camera network port to the portable POE network switch from the patch in respective communication room. 3) Set the IP address of the commissioning laptop to the required range. 4) Open the camera in web browser for configuring the video settings. 5) Adjust lens as per field of view. 6) Adjust focus as per the field of view.
Doc. No. ATC-MS-CAM-R01115-1 Issue: 0
Method Statement Template UNCONTROLLED COPY WHEN PRINTED
Page 4 of 6 Date of Issue: 23/11/2014
AL DHAFRA TRADING ENTERPRISE EST. OCCUPATIONAL HEALTH, SAFETY MANAGEMENT SYSTEM
1.
Sequence of Operations: (Specifying methods of working, tools, materials and equipment utilised)
2.
Arrange the materials such as cameras, cables & accessories to carry out the installation works. Arrange the PPE required to carry out the installation work safely.
3.
Crimp the cable provided for the camera.
4.
Mark the area where the camera needs to be installed as per the approved drawing.
5.
Make the provision for the installation as required on the marked place as per the drawing.
6.
Fix the suitable mount if required for the installation for example: For poles use Pole mount Adapter.
7.
Install the camera on the fixed adapter and connect the cable into the camera.
8.
Connect the power supply and power up the camera.
9.
Perform the testing & commissioning as mentioned in the above testing & commissioning section.
10. Clientele Engineer shall check the installations as per the approved inspection test plan. 11. Request for inspection shall be prepared by ATECO Engineer and shall be issued to Client for further inspection with Client / Consultant. 12. Clientele Engineer shall co-ordinate with Client / Consultant and arrange for their inspection.
Doc. No. ATC-MS-CAM-R01115-1 Issue: 0
Method Statement Template UNCONTROLLED COPY WHEN PRINTED
Page 5 of 6 Date of Issue: 23/11/2014
AL DHAFRA TRADING ENTERPRISE EST. OCCUPATIONAL HEALTH, SAFETY MANAGEMENT SYSTEM METHOD STATEMENT ACCEPTANCE FORM TITLE
CAMERA INSTALLATION METHOD STATEMENT
I HAVE READ AND UNDERSTOOD THE METHOD STATEMENT FOR THE WORK ACTIVITIES ABOVE
NAME DATE
TRADE
PRINT
SIGNATURE
RESPONSIBLE ENGINEER / SUPERVISOR
Doc. No. ATC-MS-CAM-R01115-1 Issue: 0
Method Statement Template UNCONTROLLED COPY WHEN PRINTED
Page 6 of 6 Date of Issue: 23/11/2014
Description of Task / Activity:
Supply, Installation, Testing & Commissioning of IP CCTV System.
Project Name:
Musaffah Gardens Building Works.
Site Address/ Location:
Document Reference:
Associated Risk Assessment
MUSAFFAH, ABU DHABI.
N/A
Reference Number Yes
N/A
Prepared By:
Syed Ameeruddin
Position:
Project Engineer
Date:
Attached No
NO
20-01-2016
Client Approval: Position:
Key Plant and Tools Required:
Doc. No. ATC-MS-CAM-R01115-1 Issue: 0
Date:
Electric Cordless Screwdriver, Crimping tool, Cutter, knife, leveller, portable electric hand drill.
Method Statement Template UNCONTROLLED COPY WHEN PRINTED
Page 1 of 6 Date of Issue: 23/11/2014
AL DHAFRA TRADING ENTERPRISE EST. OCCUPATIONAL HEALTH, SAFETY MANAGEMENT SYSTEM
Key Materials Required:
Cameras, Cables
(i.e.: access platforms/winches/ladders etc) Other Essential Equipment:
Ladders
Specific Identified Residual Hazards: (or refer to the task specific risk assessment(s))
N/A
(i.e.: Confined Spaces/Abrasive Wheels/Working at Height/Plant Operators etc)
Specific Staff Training Requirements:
N/A
(If none, state none.)
Temporary s and Props needed to facilitate the works:
Life line if needed or practicable
(i.e.: Ladders/MEWPS/Scaffold/Trestles/Step Ladder etc)
Method of Access and Egress to the work area: Fall Protection Measures: (Where work at height cannot be eliminated - consider both Personnel & Materials)
Hazardous Substances:
Ladder, Scissor Lift
(ie: Guard Rails/Toe Boards/Brick Guards/Safety Harnesses/Exclusion Zones etc) Safety Harness, fall restrain
(ie: Lubricants/Solvents/Flammable Materials/Refrigerants/Welding Gases etc)
(Attach COSHH Assessments and MSDS) Very Toxic
Harmful/ Irritant
Corrosive
Dangerous for the environment
Oxidising
Highly flammable
Explosive
No
No
No
No
No
No
No
Applicable:
(Detail any limits on the loadings applicable to temporary plant/equipment or fixed elements of the structure where the work is taking place.)
SWL's:
Doc. No. ATC-MS-CAM-R01115-1 Issue: 0
NA
Method Statement Template UNCONTROLLED COPY WHEN PRINTED
Page 2 of 6 Date of Issue: 23/11/2014
AL DHAFRA TRADING ENTERPRISE EST. OCCUPATIONAL HEALTH, SAFETY MANAGEMENT SYSTEM
Required Personnel Protective Equip.: Safety Boots
Hard Hats
Safety Gloves
Hearing Protection
Eye Protection
Emergency Procedures:
Name of On-Site First Aider:
Aijaz
First Aid Box Location:
Vehicle
First Aid Facilities:
Location of Nearest Hospital:
[Life Line Hospital]
Other Information & Comments:
Syed Ameeruddin (Proj. Eng.) -0506156932 Aijaz (HSE) -050-6158375 Mohd. Adnan (PM) -0506157714
1) All work will be undertaken by qualified competent persons with experience of the type of work described above, and in all cases in full accordance with safety procedures specified. QUALITY CONTROL PROCEDURES:
2) It is the responsibility of the supervisor to ensure prior to giving any personnel the job of (Camera Installation) that they are fully aware of the hazards involved and are competent to carry out the work safely. 3) The supervisor must ensure that this procedure is fully complied with.
Doc. No. ATC-MS-CAM-R01115-1 Issue: 0
Method Statement Template UNCONTROLLED COPY WHEN PRINTED
Page 3 of 6 Date of Issue: 23/11/2014
AL DHAFRA TRADING ENTERPRISE EST. OCCUPATIONAL HEALTH, SAFETY MANAGEMENT SYSTEM
Testing: Camera function, coverage & quality can be checked from the desktop client software, select the camera & the picture quality.
TESTING & COMMISSIONING:
Commissioning: 1) Ensure all installation works are complete as per approved method statement for installation of CCTV system. 2) Connect IP camera network port to the portable POE network switch from the patch in respective communication room. 3) Set the IP address of the commissioning laptop to the required range. 4) Open the camera in web browser for configuring the video settings. 5) Adjust lens as per field of view. 6) Adjust focus as per the field of view.
Doc. No. ATC-MS-CAM-R01115-1 Issue: 0
Method Statement Template UNCONTROLLED COPY WHEN PRINTED
Page 4 of 6 Date of Issue: 23/11/2014
AL DHAFRA TRADING ENTERPRISE EST. OCCUPATIONAL HEALTH, SAFETY MANAGEMENT SYSTEM
1.
Sequence of Operations: (Specifying methods of working, tools, materials and equipment utilised)
2.
Arrange the materials such as cameras, cables & accessories to carry out the installation works. Arrange the PPE required to carry out the installation work safely.
3.
Crimp the cable provided for the camera.
4.
Mark the area where the camera needs to be installed as per the approved drawing.
5.
Make the provision for the installation as required on the marked place as per the drawing.
6.
Fix the suitable mount if required for the installation for example: For poles use Pole mount Adapter.
7.
Install the camera on the fixed adapter and connect the cable into the camera.
8.
Connect the power supply and power up the camera.
9.
Perform the testing & commissioning as mentioned in the above testing & commissioning section.
10. Clientele Engineer shall check the installations as per the approved inspection test plan. 11. Request for inspection shall be prepared by ATECO Engineer and shall be issued to Client for further inspection with Client / Consultant. 12. Clientele Engineer shall co-ordinate with Client / Consultant and arrange for their inspection.
Doc. No. ATC-MS-CAM-R01115-1 Issue: 0
Method Statement Template UNCONTROLLED COPY WHEN PRINTED
Page 5 of 6 Date of Issue: 23/11/2014
AL DHAFRA TRADING ENTERPRISE EST. OCCUPATIONAL HEALTH, SAFETY MANAGEMENT SYSTEM METHOD STATEMENT ACCEPTANCE FORM TITLE
CAMERA INSTALLATION METHOD STATEMENT
I HAVE READ AND UNDERSTOOD THE METHOD STATEMENT FOR THE WORK ACTIVITIES ABOVE
NAME DATE
TRADE
SIGNATURE
RESPONSIBLE ENGINEER / SUPERVISOR
Doc. No. ATC-MS-CAM-R01115-1 Issue: 0
Method Statement Template UNCONTROLLED COPY WHEN PRINTED
Page 6 of 6 Date of Issue: 23/11/2014
Related Documents 3h463d
Checklist For Access Control System Installation 1z3r6k
November 2019 260
August 2020 0
Checklist For Ahu Installation 4i6n1e
February 2022 0
Procedure Checklist For Fm200 Installation 195vh
December 2019 91
Access Control 693w7
November 2022 0
Rfid - Based Vehicle Access Control System 15273c
December 2019 39More Documents from "Mohammed Adnan Khan" 2xl51
Risk Assessment -cg-4750-installation Of Lighting Protection Pole, Street Lighting Pole And Light Fittings.docx 6m4z3m
December 2019 418
Risk Ass - Ce -0994 - Gas Cutting, Welding, Grinding, Loading And Unloading Of Anode Palette.docx 456g6e
October 2019 473
April 2020 60
Risk Assessment -cg-4706-offloading The 40 Feet Container And Offloading The Materials.docx 5yj1o
December 2019 71
Checklist For Pre Commissioning Of Cctv System 1p3c5c
October 2019 1,494