Ciod Pipe m2s2j
This document was ed by and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this report form. Report 3i3n4
Overview 26281t
& View Ciod Pipe as PDF for free.
More details 6y5l6z
- Words: 657
- Pages: 2
CIOD PVC Pressure Fittings For use with CIOD PVC Pressure Pipe for pressure systems.
About CIOD PVC Pressure Fittings Royal Municipal Solutions supplies both fabricated and injection moulded fittings to use with Cast Iron Outside Diameter (CIOD) PVC Pressure Pipe for municipal watermains, fire lines, industrial process lines and sewer force mains. We have a wide range of fittings, including tees, bends, couplings, caps, increasers and adapters. Our high quality fittings have the same high strength and corrosion resistance as our Royal Municipal Solutions CIOD PVC Pressure Pipe. Our pressure fittings are easy to install and are used with engineered t restraints or concrete thrust blocks. Royal Municipal Solutions provides an Installation Guide with detailed recommendations on pipe handling, bedding, assembly, t restraints, thrust blocks, tapping, service connection and pressure testing.
Advantages of CIOD PVC Pressure Fittings include: • Watertight ts - no risk of infiltration or leakage, the pure, clean water that enters the system, leaves the system. • Corrosion Resistant - No metallic parts and therefore no costly anodes or protective coatings. • Hydrostatic Strength - Same long-term hydrostatic strength as our CIOD pressure pipe. • Smooth Interior Walls - Very smooth with a Hazen-Williams C-factor of 150, the same as our PVC pipe. Reduces head loss.
Fabricated fittings are available in 100mm - 600mm (4” - 24") diameters and Dimension Ratios (DR) 18 and 25. DR25 fabricated fittings are also available in 750mm and 900mm. They are third-party certified to CSA B137.3 and meet AWWA C900 and C905. Nitrile gaskets are available upon request. If customers have a specific fitting configuration, we have the flexibilty to create the fitting that meets the needs of their project. Injection Moulded Fittings Royal Municipal Solutions injection moulded pressure fittings are light weight and easy to handle. Our injection moulded fittings are made from PVC compound with a hydrostatic design basis of 27.58MPa (4,000psi). The factory-installed compression gasket is seated in a deep square groove ensuring a tight seal when installed. They are available in 100mm - 200mm (4” - 8") diameters and have a Dimension Ratio (DR) of 18 (Pressure Class 235psi). Our injection moulded fittings are third party certified to CSA B137.2 and meet AWWA C907.
Fabricated Fittings Royal Municipal Solutions pressure fabricated fittings are manufactured using our Royal Municipal Solutions CIOD PVC pressure pipe and are thermoformed, solvent cemented and fibreglass reinforced. We use the same Double Seal Locked-In (DSLI™) gasket system in our fabricated fittings as our pressure pipe. The gasket creates a tight seal and protects the pipe and fittings from shock, vibration and earth movements. Fabricated bends 45° and under are manufactured from one piece of pipe. These lightweight, compact fittings are easy to handle in the field. All bends greater than 45° are manufactured with two angled sections of pipe solvent cemented together and fibreglass reinforced.
Our injection moulded fittings cans be used with both DR18 and DR25 pressure pipe. They are designed to accommodate off-the-shelf t restraint rings. There is no need to stock and ship modified t restraint rings. They offer the same high strength and corrosion resistance as our Royal Municipal Solutions CIOD pressure pipe. Certifications Royal Municipal Solutions CIOD PVC Pressure Fittings proudly meets the following standards:
CSA B137.2 (Injection Moulded)
AWWA C900/C905/C907 (Injection Moulded)
CSA B137.3 (Fabricated)
Our various pipe and fittings solutions have been manufactured to meet the needs of our customers and their applications. one of the below Sales Centres for more information: • Municipal Pipe & Fittings Solutions • Plumbing Pipe & Fittings Solutions • Electrical Pipe & Fittings Solutions • Industrial Pipe & Fittings Solutions • Irrigation Pipe & Fittings Solutions Sales & Distribution Centres: Langley, BC, Canada T/F 1.800.663.0696 F 1.800.663.6564 ....................................... Woodbridge, ON, Canada T/F 1.866.769.7473 F 905.856.3986 ....................................... Laval, QC, Canada T/F 1.800.465.9754 F 450.688.6624 ....................................... Distribution Centres: Calgary, AB, Canada T/F 1.800.663.0696 F 1.800.663.6564 ....................................... Winnipeg, MB, Canada T/F 1.800.663.0696 F 1.800.663.6564 ....................................... royalmunicipalca.com
M_CIODFIT_BRV3 Printed 02.2014
About CIOD PVC Pressure Fittings Royal Municipal Solutions supplies both fabricated and injection moulded fittings to use with Cast Iron Outside Diameter (CIOD) PVC Pressure Pipe for municipal watermains, fire lines, industrial process lines and sewer force mains. We have a wide range of fittings, including tees, bends, couplings, caps, increasers and adapters. Our high quality fittings have the same high strength and corrosion resistance as our Royal Municipal Solutions CIOD PVC Pressure Pipe. Our pressure fittings are easy to install and are used with engineered t restraints or concrete thrust blocks. Royal Municipal Solutions provides an Installation Guide with detailed recommendations on pipe handling, bedding, assembly, t restraints, thrust blocks, tapping, service connection and pressure testing.
Advantages of CIOD PVC Pressure Fittings include: • Watertight ts - no risk of infiltration or leakage, the pure, clean water that enters the system, leaves the system. • Corrosion Resistant - No metallic parts and therefore no costly anodes or protective coatings. • Hydrostatic Strength - Same long-term hydrostatic strength as our CIOD pressure pipe. • Smooth Interior Walls - Very smooth with a Hazen-Williams C-factor of 150, the same as our PVC pipe. Reduces head loss.
Fabricated fittings are available in 100mm - 600mm (4” - 24") diameters and Dimension Ratios (DR) 18 and 25. DR25 fabricated fittings are also available in 750mm and 900mm. They are third-party certified to CSA B137.3 and meet AWWA C900 and C905. Nitrile gaskets are available upon request. If customers have a specific fitting configuration, we have the flexibilty to create the fitting that meets the needs of their project. Injection Moulded Fittings Royal Municipal Solutions injection moulded pressure fittings are light weight and easy to handle. Our injection moulded fittings are made from PVC compound with a hydrostatic design basis of 27.58MPa (4,000psi). The factory-installed compression gasket is seated in a deep square groove ensuring a tight seal when installed. They are available in 100mm - 200mm (4” - 8") diameters and have a Dimension Ratio (DR) of 18 (Pressure Class 235psi). Our injection moulded fittings are third party certified to CSA B137.2 and meet AWWA C907.
Fabricated Fittings Royal Municipal Solutions pressure fabricated fittings are manufactured using our Royal Municipal Solutions CIOD PVC pressure pipe and are thermoformed, solvent cemented and fibreglass reinforced. We use the same Double Seal Locked-In (DSLI™) gasket system in our fabricated fittings as our pressure pipe. The gasket creates a tight seal and protects the pipe and fittings from shock, vibration and earth movements. Fabricated bends 45° and under are manufactured from one piece of pipe. These lightweight, compact fittings are easy to handle in the field. All bends greater than 45° are manufactured with two angled sections of pipe solvent cemented together and fibreglass reinforced.
Our injection moulded fittings cans be used with both DR18 and DR25 pressure pipe. They are designed to accommodate off-the-shelf t restraint rings. There is no need to stock and ship modified t restraint rings. They offer the same high strength and corrosion resistance as our Royal Municipal Solutions CIOD pressure pipe. Certifications Royal Municipal Solutions CIOD PVC Pressure Fittings proudly meets the following standards:
CSA B137.2 (Injection Moulded)
AWWA C900/C905/C907 (Injection Moulded)
CSA B137.3 (Fabricated)
Our various pipe and fittings solutions have been manufactured to meet the needs of our customers and their applications. one of the below Sales Centres for more information: • Municipal Pipe & Fittings Solutions • Plumbing Pipe & Fittings Solutions • Electrical Pipe & Fittings Solutions • Industrial Pipe & Fittings Solutions • Irrigation Pipe & Fittings Solutions Sales & Distribution Centres: Langley, BC, Canada T/F 1.800.663.0696 F 1.800.663.6564 ....................................... Woodbridge, ON, Canada T/F 1.866.769.7473 F 905.856.3986 ....................................... Laval, QC, Canada T/F 1.800.465.9754 F 450.688.6624 ....................................... Distribution Centres: Calgary, AB, Canada T/F 1.800.663.0696 F 1.800.663.6564 ....................................... Winnipeg, MB, Canada T/F 1.800.663.0696 F 1.800.663.6564 ....................................... royalmunicipalca.com
M_CIODFIT_BRV3 Printed 02.2014
Related Documents 3h463d
Ciod Pipe m2s2j
November 2022 0
Pipe 4r2d6r
January 2021 0
Pipe 4r2d6r
November 2020 0
Pipe Problems.docx 152949
January 2021 0
Pipe s 4wg10
November 2019 132