Cipet Prospectusl 67373m

lsUVªy bafLVV~;wV vkWQ IykfLVDl bathfu;fjax ,.M VsDuksykWth CENTRAL INSTITUTE OF PLASTICS ENGINEERING & TECHNOLOGY (jlk;u ,oa isVªksjlk;u foHkkx] jlk;u ,oa moZjd ea=ky;] Hkkjr ljdkj) (Dept. of Chemicals & Petrochemicals, Ministry of Chemicals & Fertilizers, Govt. of India) Ekq[;ky; : fx.Mh] psUuS - 600 032 / Corporate Office : Guindy, Chennai - 600 032. Email : [email protected], Website : www.cipet.gov.in

PROSPECTUS

ACADEMIC PROGRAMMES 2010-11

Welcome to Cipet CIPET – a premier National Institution under the Department of Chemicals & Petrochemicals, Ministry of Chemicals & Fertilizers, Govt. of India is fully devoted to Academic, Technology , Research & Development activities in the area of Plastics Engineering and Technology. CIPET offers the entire gamut of Academic Programmes ranging from Diploma, Post Diploma, Post Graduate & Doctoral programmes with varying level of entry qualifications. The regular long-term academic programmes of CIPET are basically designed in line with the needs of the industry with more emphasis on practical training in the field of Plastics Engineering and Technology. The Undergraduate and Post Graduate Degree programmes are offered at selected centres viz., Ahmedabad, Bhubaneswar, Chennai, Hajipur and Lucknow in affiliation with reputed Universities. From the academic Year 2010-11, CIPET has proposed to introduce B.Tech Programme in Plastics Engineering & Technology at CIPET Haldia and Murthal and B.Tech Manufacturing Engineering / Technology and M.Sc., (Tech) Material Science Engineering (Integrated Programme) at selected centres of CIPET. CIPET renders Technology Services in Design, Tooling, Processing, Testing & Quality Assurance for the benefit of Plastics and allied Industries. The services are well utilized by the plastics industry for their growth and prosperity. The organizations like Indian Space Research Organisation (ISRO), Hindustan Aeronautics Limited (HAL), Ordnance Factory Board (OFB), Electronic Corporation of India Limited (ECIL) are few of the major Public Sector and Govt. organizations recognized CIPET as their prospective vendor for precision tooling and Mould & Product development. The Plastics Testing Centre is one of the best testing facilities in Asia and the laboratory is accredited by NABL. Further, CIPET is in the process of getting NABCB Accreditation for pre –delivery inspection services. The vision of two Research & Development Wings – Advanced Research School for Technology & Product Simulation (ARSTPS) at Chennai and Laboratory for Advanced Research in Polymeric Materials (LARPM) at Bhubaneswar have been conceived with objectives of transforming CIPET as a Global Research Centre on Polymeric Materials as well as a resource centre for newer concept development & conversion of concept into reality by product development on commercial scales. Technology transfers, Creation of Intellectual Property (CIP), knowledge base with validated documentation are the key aspects of functioning of these R&D Wings.

CONTENTS 1. 2. 3. 4.

5. 6. 7. 8. 9. 10. 11. 12. 13. 14.

15. 16. 17. 18. 19. 20. 21. 22. 23.

Institute Profile......................................................................................................................1 Objectives..............................................................................................................................1 Activities................................................................................................................................1 Academic ...............................................................................................................................2 CIPET Programmes.................................................................................................................2 Post Graduate Diploma //Diploma Programmes i) Post Diploma in Plastics Mould Design..........................................................................2 ii) Diploma in Plastics Mould Technology...........................................................................2 iii) Diploma in Plastics Technology.....................................................................................2 iv) Post Graduate Diploma in Plastics Processing & Testing...............................................2 UG & PG Programmes............................................................................................................3 Post Graduate Degree Programmes......................................................................................3 i) M.Tech in Plastics Engineering/Technology....................................................................3 ii) M.Tech.in Polymer Nano Technology.............................................................................3 iii) M.E (CAD/CAM )...........................................................................................................4 Under Graduate Degree Programme.....................................................................................4 B.Tech.in Plastics Engineering/Technology.............................................................................4 Placement..............................................................................................................................5 Alumni...................................................................................................................................5 Beyond the Class Room..........................................................................................................6 Faculty...................................................................................................................................7 Library...................................................................................................................................7 Accreditation.........................................................................................................................7 Achievements........................................................................................................................8 Global Recognization ............................................................................................................8 Research & Development activities........................................................................................9 CIPET Publications................................................................................................................10 Facilities a. Design/CAD/CAM/CAE.....................................................................................................10 b. Tool Room........................................................................................................................11 c. Testing & Quality Control..................................................................................................12 d. Plastics Processing...........................................................................................................13 Fee Structure .......................................................................................................................13 How to apply?......................................................................................................................14 Important Dates...................................................................................................................14 Selection Procedure.............................................................................................................14 Award of Stipend..................................................................................................................14 Meritorious Scholarship.......................................................................................................14 ission Regulations........................................................................................................14 General Instructions............................................................................................................15 Training Rules & Regulations...............................................................................................15

3 ACTIVITIES

1 INSTITUTE PROFILE Central Institute of Plastics Engineering & Technology (CIPET) is a premier National Institution devoted to Academic, Technology & Research (ATR) for the Plastics & Allied industries, in India. First CIPET campus was established by Government of India in 1968 at Chennai and subsequently 14 CIPET Campuses have been established by Government of India in the country. Today 15 CIPET Institutes – Ahmedabad, Amritsar, Aurangabad, Bhopal, Bhubaneswar, Chennai, Guwahati, Hajipur, Haldia, Hyderabad, Jaipur, Imphal, Lucknow, Mysore and Panipat are contributing through ATR services to the industries in India and abroad. All the centres have adequate infrastructural facilities in the areas of Design, CAD/CAM/CAE, Tooling & Mould Manufacturing, Plastics processing, Testing and Quality Control.

Academic, Technology and Research & Development. I. Academic (a) Regular Long term Programmes Ph.D.Programmes in Polymer Science / Material Science ? / Plastics Engineering at LARPM CIPET – Bhubaneswar Master of Technology in Plastics Engineering / Technology ? (M.Tech-PE/PT) Master of Engineering in CAD/CAM (M.E. CAD/CAM) at ? ARSTPS – CIPET, Chennai Master of Technology in Polymer Nano Technology ? (M.Tech - PNT) at LARPM, CIPET, Bhubaneswar Bachelor of Technology in Plastics Engineering / ? Technology (B.Tech-PE/PT) Post Graduate Diploma in Plastics Processing & Testing ? (PGD-PPT)

The courses are designed to produce technically trained manpower for ready absorption in plastics industry. The infrastructure facilities in of machinery and equipment are continuously upgraded/modernised to match with the technological development and needs of the industry globally. To keep the industries abreast with the new technological developments and update the skill levels of the personnel working in the industry, short-term programmes, tailor-made programmes, modular training programmes, technical seminars are conducted on Design, Tooling, Plastics Processing, Plastics Testing and Quality Assurance.

Diploma in Plastics Mould Technology (DPMT) ? Diploma in Plastics Technology (DPT) ? Post Diploma in Plastics Mould Design (PD-PMD) ? (b) Short Term Programmes Skill & Technology Upgradation Programmes for Industry ? Tailor-Made Courses ? Modular programmes ? Entrepreneural Development programmes ? Training for Overseas Nationals ? II. Technology Services CIPET renders Technology Services (TSS) to plastics and allied industries in different fields of Plastics Engineering & Technology.

2 OBJECTIVES

Testing and standardisation for plastics materials and ? products. Material selection for new applications or ?

Development of skilled Human Resource for plastics ? industries.

substitution of conventional material. Machinery and equipment selection ? Setting up of tool room/processing industries & ?

Upgradation of technical knowledge through advanced ? training programmes.

testing laboratories Technical to the industry in product ?

Quality control and standardization of plastics materials ?

design/mould/dies/tools design, product failure analysis with the aid of CAD/CAM/CAE. Undertaking job works in all the areas of Plastics ? Engineering & Technology

and products. Technical consultancy and advisory services for enhancing ? techno-commercial competitiveness of the industries.

III. Research & Development Design and development of moulds, dies for plastics ?

Two dedicated R&D Wings - LARPM & ARSTPS have been dedicated to the country where integrated Research Programmes are undertaken in the Polymeric Materials & Product Design and Development areas.

industries. Research and Application development in the areas of ? Plastics Engineering & Technology.

1

4 ACADEMIC

CIPET Programmes (i) Post Diploma in Plastics Mould Design Course code Duration Maximum age

: : :

PD-PMD 1 year 24 years*

Entry Qualification: 3 year Diploma in Mechanical, Plastics Technology, Tool/Production Engineering, Mechatronics, Automobile Engineering, Tool & Die Making, DPMT/DPT (CIPET) or equivalent. (ii)

Diploma in Plastics Mould Technology Course code Duration Maximum age

: : :

DPMT 3 years 19 years*

Entry qualification : X Std. with Maths, Science and English. (iii) Diploma in Plastics Technology Course code Duration Maximum age

: : :

DPT 3 years 19 years*

Entry qualification : X Std. with Maths, Science and English. (iv)

Post Graduate Diploma in Plastics Processing & Testing Course code Duration Maximum age

: : :

PGD-PPT 1 ½ year 24 years*

Entry qualification : 3-year Degree in Science with Chemistry as one of the subjects.

* Age limit is relaxable upto 5 years for applicants sponsored by industries, SC/ST category and applicants from North Eastern Region in the case of Diploma / Post Diploma / Post Graduate Diploma Programmes.

2

UG & PG Programmes CIPET offers Post Graduate and Under Graduate Degree Programmes at High Learning Centres at Ahmedabad, Bhubaneswar, Chennai, Lucknow and also at Hajipur. POST GRADUATE DEGREE PROGRAMMES (i)

M.Tech.in Plastics Engineering / Technology Course code Duration Maximum age

: : :

M.Tech (PE/PT)* 2 years 35 years

Entry qualification: B.E./B.Tech./B.Sc., Engg.(4 years) In Mechanical / Chemical / Production / Polymer /Plastics Engineering / Technology (or) M.Sc. in Polymer Science / Chemistry with polymer specialization. Affiliation Chennai Bhubaneswar Lucknow Hajipur

-

Anna University, Chennai Biju Patnaik University of Technology, Rourkela U.P. Technical University, Lucknow Babasaheb Bhimrao Ambedkar Bihar University, Muzaffarpur

*Selection and eligibility as per affiliating University norms. (ii)

M.Tech. in Polymer Nano Technology Course code Duration Maximum age

: : :

M.Tech - PNT * 2 years 35 years

Entry qualification : B.E./B.Tech.(4 years) in Mechanical,Plastics Engineering / Technology / Polymer / Chemical (or) M.Sc., in Polymer Chemistry / Polymer Science / Physics / Chemistry with Valid GATE score. Affiliation Bhubaneswar Biju Patnaik University of Technology, Rourkela . *Selection and eligibility as per affiliating University norms.

3

(iii) Master of Engineering in CAD/CAM Course code Duration Maximum age

: : :

M.E. (CAD/CAM)* 2 years 35 years

Entry qualification : B.E./B.Tech. (4 years) in Mechanical / Automobile / Manufacturing /Production /Industrial / Mechatronics / Marine / Aeronautical.

/

Affiliation Chennai

-

Anna University, Chennai.

*Selection and eligibility as per affiliating University norms. UNDER GRADUATE DEGREE PROGRAMME (i) B.Tech.in Plastics Engineering/Technology Course code Duration Maximum age

: : :

B.Tech-PE/PT* 4 year 21 years

Entry Qualification : H.Sc/10+2 (academic stream) with Maths, Physics & Chemistry. Affiliation : Chennai Bhubaneswar Lucknow Ahmedabad

-

Anna University, Chennai. Biju Patnaik University of Technology, Rourkela U.P.Technical University, Lucknow Gujarat Technological University

* Selection and eligibility as per affiliating University norms. For ission to Under Graduate programme(B.Tech-PE/PT), please apply through affiliating University.

Proposed Programmes for the year 2010 -2011** • B.Tech. (Plastics Engineering/Technology) – at Murthal in affiliation with Deenbandhu Chhotturam University of Science & Technology and at Haldia in affiliation with West Bengal Technical University • B.Tech. (Manufacturing Engineering / Technology) - at Ahmedabad, Bhubaneswar, Chennai and Lucknow • M.Sc. Tech. (Material Science Engineering) - 5year integrated programme at Bhubaneswar, Chennai and Lucknow ** Subject to AICTE approval and affiliation with university.

4

5 PLACEMENT CIPET plays a significant role in helping the plastics industry by providing vital input “Manpower” to achieve their objectives with potential optimization. CIPET has forged close relationship with industrial and research establishments. It is further reinforced through technology upgradation programmes – workshops, seminars, and entrepreneurship programmes to provide an ideal platform for industry institute interface. Few of the prominent placement partners

Placement Statistics for the last 5 years Entrepreneur

Percentage of Students

Placement

100 90 80 70 60 50 40 30 20 10 0

4

5

6

7

7

89

89

90

91

92 93

2004-05 2005-06 2006-07 2007-08 2008-09

CIPET has an established brand equity in “Human Resource Market” and CIPET graduates enjoy good reputation among plastics and allied industry in the domestic as well as international market. CIPET is the preferred destination for campus and off campus recruitment for hundreds of reputed companies / organisations and business houses to fulfil their manpower requirement. . Placement cell at CIPET Corporate and centres has constantly network with business houses and industry to update the list of prospective employers and synchronise the training inputs to skill levels of students at required level in industry. Placement cell facilitate the students in organising campus recruitements..

6 ALUMNI CIPET has a vibrant alumni consists of 32,000 spread across the globe in various positions.CIPET Alumni has created a bond between them and their Alma Mater. The strength of Alumni speaks about the quality of the Institution.They are extending their to the Institution in all possible ways.

TECHNICAL PRESENTATIONS BY CIPET ALUMNI CIPET Alumni is continuously ing the CIPET trainees by making technical presentations. Students actively attend these sessions and gain more insight from their seniors. CIPET ALUMNI E- MAGAZINE

CIPET Alumni has launched an E- magazine in May '09.

CIPET ALUMNI WEBSITE

CIPET Alumni has launched a website www.cipetalumni.com

5

Beyond the Class Room Apart from academics, CIPET trainees actively take part in extra curricular activities such as sports, cultural programmes also.

Fresher’s Day

Sports Day

Cultural Activities

6

7 FACULTY

Overseas Training of Faculty

CIPET has well qualified and experienced faculty to perform academic as well industrial jobs as per AICTE norms and has expertise in various disciplines of Plastics Engineering and Technology such as materials, processing, testing, design and tooling. CIPET faculty has vast and rich experience in the field and has regular interaction and training with reputed institutions and industries abroad.

8 LIBRARY All the centres of CIPET across the country have a good library with books related to Plastics Technology. The collection includes some rare books on Plastics. The Total number of books in the libraries at all the centres is around 35,000. Journals relevant to the Curriculum of all the courses offered at CIPET are available at all libraries in order to keep the students abreast with the latest development in their field of study. Keeping in pace with the latest advancement in the Information Technology, Digital library is being established wherein the students will have access to the electronic books, journals and institutional repositories. Specialised services like CAS will be implemented for the benefit of the students.

9 ACCREDITATION

?

? ISO 9001 : 2000 certified institution for training and technical activities. ? All India Council for Technical Education (AICTE), New Delhi has approved M.Tech and B.Tech Programmes ? AICTE approved Diploma, Post Diploma and Post Graduate Diploma Programmes. ? NABL Accreditation for CIPET Plastics Testing Laboratory ? Recognised by Bureau of Indian Standards (BIS) for raw material and product evaluation. ? Recognised centres for carrying out research work leading to Ph.D/Doctorate Programme at CIPET Chennai,

Bhubaneswar & Lucknow. ? Recognised by Department of Scientific and Industrial Research (DSIR), Government of India, as Scientific and

Research organisation in the field of Plastics Technology. ? In the process of getting NABCB Accreditation as per ISO/IEC -17020 for Pre Delivery Inspection Services.

7

10 ACHIEVEMENTS CIPET has been bestowed with “Green Tech Environment Excellence Award in Silver Category” for the year 2002-03 for its significant contribution in the field of Plastics & Environment Education & Management. CIPET has been awarded with PLASTICON Award 2005 - Runner – up by Plastindia Foundation for “Outstanding Contribution in Plastics Education & Training in India”.

11 GLOBAL RECOGNIZATION The Institute is involved in collaborative programmes at international and national levels in order to remain at the forefront on the technological development in the field of Plastics and allied areas and to share its experience with them. Some of the facets of these collaborations include students and faculty exchange, t research, Product development, creation of electronic media and exchange of academic materials for training. In order to have close cooperation in research work, the Institute has signed Memoranda of Understanding (MoUs) with foreign universities, research institutes and industrial organizations. MoUs with Foreign Institutions ASTM International Michigan State University Pennsylvania State University University of Toronto University of Massachusetts University of New South Wales University of Guelph European Bioplastics and International Biodegradable Products Institute

MoUs with Indian Institutions Ordnance Factory Board Utkal University

8

12 RESEARCH & DEVELOPMENT ACTIVITIES Dedicated efforts have been taken for the future R&D vision of CIPET to be recognized as the Global R&D Wing in the area of Ploymer Composites, Nanocomposites, Biopolymers, Functional Plastics, Carbon Nanotubes, Polymer Membranes, Conducting Polymers, Fuel cells, E-Waste recycling, Innovative Product concept Development & Commercialization by aid of CAD/CAM/CAE expertise etc. Inline with the R&D vision, the below mentioned 2 R&D wings have commenced the activities.

Laboratory for Advanced Research in Polymeric Materials (LARPM) Laboratory for Advanced Research in Polymeric Materials (LARPM), an exclusive R&D wing at Central Institute of Plastics Engineering & Technology (CIPET), Bhubaneswar, is equipped with state-of-art Research facilities, for undertaking integrated Research Programme in various facets of Plastics Engineering & Technology. LARPM provides an apt platform for Excellence in Scientific Research in the field of Polymeric Materials & Engineering for networking amongst Universities and Research Institutes, Industries and develop core and strategic Research Programmes which result in Knowledge Generation, Intellectual property creation and facilitates transfer of technology. Facilities Available:

Fourier Transform Infrared Spectroscopy ( FTIR) ? Differential Scanning Calorimetry ( DSC) ? Thermomechanical Analyser (TMA ) ? Thermogravametric Analyser ( TGA ) ? Karl Fischer Moisture Analyser ? ? Transmission Electron Microscopy ? X-ray Diffractometer Ultraviolet Visible Spectrophotometry UV/VIS ? ? Cone-Colorimeter Scanning Electron Microscopy (SEM) ? ? Parallel plate viscometer ? Torque rheometer ? Biodegradation Test set up

Advanced Research School for Technology & Product Simulation (ARSTPS) A dedicated Research wing of CIPET, Chennai undertakes R&D projects in the area of CAD/CAM/CAE. ARSTPS provides high-end solutions for the complex & critical engineering problems through a dedicated team of Scientists. The Scientists are exposed with a range of Solutions for the most challenging technical issues in the field of Automotive, Consumer products, Healthcare, Heavy engineering & Telecom. With the Excellent infrastructure & Dedicated Professional team, the best services are offered to achieve Customer Satisfaction. Focussed Area: ? Product development and enhancement ? Innovative product design for Automobile, Aerospace, Medical and

Packaging industries. ? Computer Aided Engineering. ? Product and Tool design conceptualization (Modelling, Analysis,

Process Optimisation & Simulation) ? E-Manufacturing of prototypes. ? Rapid prototyping for lead time reduction. ? Rapid engineering for metal and conventional product

substitution.

9

13 CIPET PUBLICATIONS I) International Journal The International Journal of Plastics Technology (IJPT) is published by the Laboratory for Advanced Research in Polymeric Materials (LARPM) of the Central Institute of Plastics Engineering & Technology (CIPET) to disseminate research advancements in the areas of Polymer/Plastics Engineering & Technology. This is co-published by M/s. Springer India.

ii) CIPET Times CIPET Times is an in-house publication which includes the activities of all the CIPET centres. technological development and article from eminent academicians/industrialists, Alumni activities, etc.

It also has the

iii) Text Books Text book on Fundamentals of Plastics Mould Technology and Fundamentals of Plastics Testing were released for the benefit of CIPET trainees as well as for the industry personnel.

14 FACILITIES The facilities at CIPET centres are among the best not only in India, but in whole South-East Asia including Middle-East. It is worth mentioning that CIPET has all the facility under one roof in respect of Plastics Technology viz. Design, Tooling, Processing, Testing & Quality Control, etc. The equipments & machineries are utilized for providing hands- on practical training for students as well as employed for undertaking industrial assignments for processing, design & development of mould, testing & evaluation of plastics products as well for R&D projects on product/application development.

(a) DESIGN/CAD/CAM/CAE ? 3D Solid Modeling ? Product design and mould validation of

- Injection Moulding - Compression Moulding and - Transfer Moulding ? Extrusion die design, pipe die, sheet die & co-extrusion dies ? 3D digitizing and 2D digitizing (CAD drawing conversion) ? A-0 plotting services using inkjet / laser plotting ? Generation of CNC part programming

10

SOFTWARE Integrated CAD software Pro-E & wild fire 4.0, CATIA V5 R17, UGNX6, IDEAS 6.0, pro-E, wild fire 5.0, ANSYS 12.0

Plastics Analysis Software Auto desk Mold flow 2010 Finite Element Analysis Hypermesh 9.0, LS Dyna 970. HARDWARE

Server SGI INDI CO,2 HP PROLIANT HL350, IBM E 230, IGB RAM 220GB HDD. Nodes SGI 02 Nodes , IBM Intellistation M-pro,512 MB RAM 40 GB HDD Plotter FAROARM Workstation HP INITIAW STATION xw 6400 IBM WORKSTATION

(b) TOOL ROOM CNC Machines · Universal Milling & Boring Machine · Die Sinking – EDM Universal Lathe with Hydrobar feeder · High Precision Surface & Profile Grinder Inspection Facilities · Co-ordinate Measuring Machine · Profile projector – EPO · Ultrasonic flaw detector · SurfTest – 3

Universal Milling Machine

Vertical Milling Machine

CNC Lathe

Special Purpose Machines · Jig Boring machine with DRO · Co-ordinate drilling & boring machine with DRO · Rigid die-sinking machine · Centre lathe with hydro Copying attachment · Rotary surface grinding · Cylindrical grinder · Optical profile grinding machine · Wirecut EDM

11

(C) TESTING & QUALITY CONTROL Mechanical Laboratory · Universal Testing Machine · Izod/Charpy Impact Tester · Xenon Arc Weatherometer · Burst Strength Tester · Climatic Chamber · Tear Strength Tester · Folding Endurance Tester · Gas Permeability Apparatus · Stiffness Tester · Creep Tester Thermal Laboratory · Heat Distortion Temperature/Vicat Softening Point · Melt Flow Indexer · Oxygen Index Tester · Flammability Tester · Low Temperature Brittleness Point Apparatus · Thermal Conductivity Apparatus · Co-efficient of Thermal Expansion Apparatus Electrical Laboratory · Arc Resistance Tester · Comparative Tracking Indexer · Dielectric Strength Tester · Precision LCR Meter · Electrostatic Field Meter · Teraohm Meter

Torque Rheometer Dynamic Mechanical Analyser

Characterization Laboratory · Differential Scanning Calorimeter (DSC) · Thermo Gravimetric Analyser (TGA) · Thermo Mechanical Analyser (TMA) · Gel Permeation Chromatography · FTIR – Spectrometer

Ultramicrotome Cone Calorimeter

Comparative Tracking Index

Chemical Laboratory · Carbon Black Content Apparatus · Biodegradability Testing apparatus · Gas Chromatography · ESCR Apparatus

Transmission Electron Microscope

Rheology and Product Testing Lab · Dynamic Visco elastic meter · Twin screw extruder · Torque Rheometer · Rheocord

Xenon Arc Weatherometer Universal Testing Machine

12

(d) PLASTICS PROCESSING · · · · · · · · · · · ·

All Electric Injection Molding Machine Microprocessor Two color Injection Molding Machine Microprocessor Injection Moulding Machines Multilayer Blown Film Extrusion Plant Pipe & Blown Film Extruders Extruder for tubing Compression moulding machine Thermoforming machine Vacuum forming machine Rotational moulding machine Blow moulding machine Stretch Blow Moulding

Two Colour Microprocessor Controlled Injection Moulding Machine

All Electric Microprocessor Controlled Automatic Injection Moulding Machine

Two Colour Microprocessor Controlled Injection Moulding Machine

15 FEE STRUCTURE COURSE FEE (Per Semester - Six Months)

S.No.

COURSE

SPONSORED

OPEN

(Rs)

Hostel Room Charges & Electricity charges and CMD (Based on CIPET center location)

(Rs)

1

M.TECH.

30,000

22,000

2

PD-PMD

20,000

10,000

3

DPMT

15,000

6,000

4

DPT

15,000

6,000

5

PGD-PPT

20,000

10,000

Hostel aspirants should have necessary amount to meet their personal monthly expenses.

FEE STRUCTURE FOR OVERSEAS APPLICANT

2 3

5 4

13

16 HOW TO APPLY? Information Brochure and Application form can be obtained from any of CIPET Centres against payment of Rs. 100/- for general candidates and Rs.25/- for SC/ST candidates in cash or Demand Draft drawn in favour of “CIPET CORPORATE” A/c No. 10565622390 payable at Chennai and the form can also be ed from our website www.cipet.govt.in . Candidates belong to North - Eastern states can get the application forms and apply on free of cost by producing their residential proof / appropriate documents.

17 IMPORTANT DATES Last date for issue of Application form ……………………………………….... 04th June 2010 Last date for submission of filled-in-Application form ……………………….11th June 2010 t Entrance Examination ………………………………………………….......11th July 2010 Commencement of Academic Session ………………………………………....16th Aug. 2010

18 SELECTION PROCEDURE Selection for all courses is as below. 1. CIPET Programmes – based on academic record and performance in the t Entrance Examination. 2. For PG Programmes - selection through respective affiliating universities norms / through CIPET JEE 3. For UG Programmes - selection through respective affiliating university.

19 AWARD OF STIPEND Stipend is awarded to meritorious students on merit-cum-means basis (condition apply).

20 MERITORIOUS SCHOLARSHIP Industry Endowment Scholarship instituted by Industries like M/s Reliance Industries Ltd., M/s Supreme Industries Ltd., M/s Jain Irrigation Systems Ltd., Plastindia Foundation, Ferromatik Milacran India Ltd., Tamil Nadu Plastics Manufacturers Association is being awarded to meritorious students as per norms.

21 ISSION REGULATIONS Selection for ission to M.Tech/M.Sc Programmes will be as per the prescribed eligibility norms of the respective affiliating universities. Only limited seats in M.Tech/M.Sc will be filled through JEE as per affiliating University norms. · · · · · · · · ·

For all other Post Graduate Diploma, Post Diploma & Diploma courses, selection will be based on academic and the performance in the t Entrance Examination, which is to be conducted on 11th July 2010. CIPET reserves a quota for SC/ST, OBC(NCL) candidates and physically challenged candidates as per norms. Age limit shall be as on 31st July 2010. Over-aged candidates will not be considered and hence need not apply. Age limit is relaxable upto five years for sponsored candidates in the case of Diploma / Post Diploma / Post Graduate Diploma Programmes and thus are not eligible for the award of stipend. In the case of applicants belonging to SC/ST category & North Eastern Region, age limit is relaxable by five years for all the categories of courses in the case of Diploma / Post Diploma / Post Graduate Diploma Programmes Limited Stipend is awarded to meritorious students of all courses based on merit-cum-means. Over-qualification will not carry any added advantage. In the case of PGD-PPT course, 2 years degree course (10+2+2) will not be considered and hence need not apply. Candidate appearing for entry qualification examination can also apply. (Necessary documents to be submitted on or before JEE.) Their selection and ission is subject to their eligibility for higher studies on successful ing of the entry qualifications.

14

. . · ·

Candidates not matching with the entry qualification and age limit will not be considered for ission and need not apply. Limited hostel accommodation is available. Allotment of hostel accommodation is on need basis and availability. No request for change of centre allotted for ission will be entertained during the course of study. The provisional selection will be cancelled for the candidate not accepting the allotment of ission within the stipulated time indicated in the call letter and the wait list will be operated to fill the vacancies.

22 GENERAL INSTRUCTIONS · · ·

· · · · · · ·

The candidates selected for ission must deposit tuition and other fees on or before the specified date stipulated in call letter. All fees from second semester onwards are to be paid within 2 weeks from the date of re-opening. Pattern of collection of fees : 1st Week No Fine 2nd Week Fine of Rs. 25/- leviable Beyond 2nd weekThe name will be automatically struck off from the rolls. Re-ission will be made on payment of Rs. 500/before the last working day of 3rd week, failing which they will be removed from the rolls. The selected candidates have to sign the code of conduct proforma at the time of ission. The selected candidates have to submit original certificates in of their entry qualification, date of birth, community certificates and any other reservation quato certificate (if applicable) for verification at centre. Practical oriented training is conducted on shift basis depending on the exigencies. The students are required to attend the training programmes in rotational shifts in alive industrial environment. The institute reserves the right to dismiss/terminate any student from the course on grounds of communicable diseases / unsatisfactory performance / lack of attendance / misconduct / ragging. As per the Hon'ble Supreme Court of India Order, “any incident of ragging comes to the notice of the authority, the concerned student shall be given liberty to explain and if his explanation is not found satisfactory, the authority would expel him/her from the institution.” No individual correspondence of any sort will be entertained.

23 TRAINING RULES & REGULATIONS ELIGIBILITY FOR THE AWARD OF DIPLOMA/POST GRADUGATE DIPLOMA A trainee is eligible for award of CIPET Diploma/Degree only upon successful completion of the course of study (theory/practical/dissertation/industrial training) for a period stipulated against each course from time to time as per the prescribed syllabus/curriculum. SUBJECT OF STUDY & CURRICULUM OUTLINE The subjects of study – theory / practicals / dissertation / industrial training will be in accordance with the syllabus / curriculum prescribed from the time to time. REQUIREMENTS OF EXAMINATIONS & ATTENDANCE · Semester examinations will be conducted at the end of each semester. · A candidate will be permitted to appear for the semester examinations for a subject / practical only if > he/she secures 90% of attendance during the said semester period > his/her conduct has been satisfactory. · However, at the discretion of the Centre-in-charge, a trainee who secures less than 90% but more than 80% attendance, may be permitted by giving an undertaking that the shortfall of attendance will be compensated,failing which their results will be withheld. · The award of Diploma for various courses shall be made by the institute on successful completion of the respective courses. Trainees who have put in less than 80% attendance are not eligible to appear for the semester examinations under any circumstances. Student securing less than 80% of attendance will be detained in the same semester.

15

· ·

Trainees who fail to compensate the lack of attendance will be debarred from continuing their course of study to the next semester. No student will be allowed to appear for the examinations unless he/she has attended 90% of the training programmes during the semester.

SEMESTER EXAMINATION / EVALUATION · · · · · ·

Semester examination will be conducted at the end of each semester both in theory and practicals/seminar/project/viva voce. The scheme of evaluation is through internal assessment and semester examination. The internal assessment/sessional marks for each subject/practical is awarded on the basis of continual evaluation of each trainee by the faculty of concerned for a maximum of 20/40/50/100 marks accordingly. Semester examinations are conducted for each subject/practical for a maximum of 30/60/100 marks accordingly. Seminar/Project Viva Voce examination are conducted for a maximum of 100 marks. A trainee who fails in any subject is ought to appear for the supplementary examination to clear the arrear/s and is allowed to continue the course of study without any break as such. There is no limit on the number of attempts for the supplementary examination. However, he/she shall have to clear the arrear subject/s within a period of two years from the date of completion of the course. Failing which, he/she will not be eligible to appear for the supplementary examinations after the period of two years as stipulated above.

ING REQUIREMENTS ·

A trainee is declared to have ed the examination in a subject if he/she secures not less than 40% in theory and 50% in practicals / seminar / project work / viva voce examinations both in internal assessment (for theory subjects and practical only) and semester examination of the total prescribed maximum marks.

·

In the case of supplementary examinations, 40% in theory and 50% in practicals / seminar / project / viva voce examination are the required ing mark of the total prescribed total marks (internal assessment/sessional marks of the first appearance will be taken into ).

ISSUE OF COURSE COMPLETION CERTIFICATE ·

Course completion certificate will be issued to the trainees only on successful completion of all semesters (ing all subjects) excepting the final semester. A trainee who has arrear/s in the previous semester/s is not eligible for the course completion certificate.

AWARD OF DIPLOMA · ·

A trainee will be eligible for the award of diploma only upon successful ing of all subjects of all semesters. Failed candidates will be eligible for the award of diploma only upon successful ing of arrear subject/s of all semesters within two years from the date of completion of the course. Otherwise, they are not eligible for award of diploma.

CLASSIFICATION OF SUCCESSFUL TRAINEES · · ·

A successful trainee who secures an aggregate of not less than 80% marks in all the semesters is declared to have ed in First Class with Distinction provided the trainee es all the subjects of semester examinations in first attempt. A successful trainee who secures an aggregate of not less than 60% marks in all the semesters is declared to have ed in First Class provided the trainee es all the subject/s of semester examination in first attempt. All other successful trainees will be declared to have ed in Second Class.

*** 16

CIPET Corporate & Centres BIHAR

GUJARAT Deputy Director CIPET Plot No. 630, Phase-IV, GIDC, Vatva, Ahmedabad – 382 445. Tel : +91-79-25832267, 40083901 Fax : +91-79-25835236 Email : [email protected]

PUNJAB Chief Manager (Project), CIPET P.O. Rayon & Silk Mills, Adjacent to GND University Amritsar – 143 104. Tel : +91-183-2258671, 2258938 Fax : +91-183-2258671 Email : [email protected]

MAHARASHTRA Sr. Project Officer CIPET Plot No. 1-B/1(Meltron Building) MIDC Industrial Area, Chikalthana,Jalna Road Aurangabad - 431 210. Tel : +91- 0240-3206636 Fax : +91 - 0240- 2476626 Email : [email protected]

MADHYA PRADESH

Deputy Director CIPET EPIP Complex, Hajipur Industrial Area, Hajipur – 844 101. Tel : +91-6224-277424, 273515 Fax : +91-6224-275316 Email : [email protected]

WEST BENGAL Deputy Director CIPET, City Centre, PO: Debhog, Dist: Purba Medinipur, Haldia – 721657. Tel : +91-3224-255404, 255444 Fax : +91-3224-253016 Email : [email protected]

ANDHRA PRADESH Chief Manager (Project) CIPET Post Bag No.3, CIDA Phase II, HCL Post Hyderabad -500051 Tel : +91-40-27264040,27263750,27264043 Fax : + 91-40-27264051 Email : [email protected]

MANIPUR

Chief Manager (Project) CIPET ‘G' Sector, Govindpura Industrial Area , Bhopal –462023 (M.P.) Tel : +91-755-2684769, 2687454 Fax : +91-755-2689041 Email : [email protected]

ORISSA

Project Officer CIPET C-12, Industrial Estate, Takyalpet Imphal – 795 001 Tel : +91-385-2223158, 2449158 Fax : +91-385-2452870 Email : [email protected]

RAJASTHAN

Chief Manager(Project) CIPET B-25, CNI Complex, PO-Patia Bhubaneswar – 751 024. Tel : +91-674-2743767, 2743462 Fax : +91-674-2743863. E-mail: [email protected]

ORISSA- Unit II

Manager (Project) CIPET SP-1298, Sitapura Industrial Estate, Phase – III,Tonk Road, Jaipur - 302 022 Tel : +91-141-3239784 Fax: +91-141-2770736 Email : [email protected]

UTTAR PRADESH

Manager (Project) S-3/79, Sector-A, Zone-B, Mancheswar Indl Estate, Bhubaneswar - 751 010. Ph :0674-2588203 / 2588087 Fax :0674-2587874 E-mail :[email protected]

Deputy Director CIPET B-27, Amausi Indl. Area Lucknow – 226 008 Tel : +91-522-2437646, 2436910 Fax : +91-522-2436227 Email : [email protected]

KARNATAKA

TAMILNADU Deputy Director CIPET Thiru-vi-ka Industrial Estate, Guindy, Chennai-600032. Tel : +91-44-22254710, 22254701 – 706 Fax : +91-44-22254707 Email : [email protected]

Deputy Director CIPET 437/A, Hebbel Industrial area Mysore –570016 Karnataka. Tel : +91-821-2511903, 2510618 Fax : +91-821-2510990 Email : [email protected]

HARYANA

ASSAM Deputy Director CIPET P.O: Changsari,District: Kamrup, Guwahati – 781 101 Tel : +91-361-2680747, 2680622 Fax : +91-361-2680281 Email : [email protected]

Manager (Project) CIPET GT Road, Sewah Gaon, Panipat-132108, Haryana Tel : +91-180-3297993 Fax: +91-180-2565097 Email : [email protected]

For further details, please : MANAGER (Training) CIPET Corporate Office: TVK Industrial Estate, Guindy, Chennai - 600 032. INDIA Tel: 044-22254780,22254783,22254784, Fax: +91-44-22254779 E-mail: [email protected] Website: www.cipet.gov.in