Commissioning Bts And Node B 1w3v4y

Commissioning BTS and Node B (V200R012C00SPC401 )

Copyright © 2009 Huawei Technologies Co., Ltd. All rights reserved.

www.huawei.com

COMMISSIONING NODE B PUERTO DE MANTENIMIENTO DE LA BTS

PUERTO DE MANTENIMIENTO DEL NODO B


Page1

COMMISSIONING NODE B l

Para el comisionamiento del nodo B es importante contar con el software (LMT)

l

Nos conectamos al nodo B a traves del puerto ETH de la tarjeta WMPT.

l

Tener en cuenta que la dirección IP del ETH por defecto es: 17.21.2.15

l

La IP de nuestra laptop: 17.21.2.10


Page2


Al entrar a la ventana de mantenimiento del nodo B se procede con la actualizacion del software.

l

Hacemos clic en:

l

Maintenance>Software Management>Software update, escogemos la opcion “Update NodeB software” y hacemos clic en “Next”


Page3


Page4


La persona que realiza el comisionamiento se le entregara un documento “Script”, en el cual se encuentra los parámetros de configuración.

l

PARA COMISIONAR UN SITE NO ES NECESARIO CONTAR CON UN SCRIPT


Page5

COMMISSIONING NODE B


Page6



Page7



Page8


Nota:

l

La primera barra de estado viene a ser el estado de la creación del backup del nodo B. Esta podrá direccionarla en cualquier parte de su laptop.

l

La segunda barra de estado especifica el estado de la carga del archivo de configuración.

l

La tercera barra de estado especifica el estado de la carga del software.

l

Y por ultimo, la cuarta barra de estado especifica el estado de la activación del software. Copyright © 2009 Huawei Technologies Co., Ltd. All rights reserved.

Page9



Page10


Cuando uno acaba de hacer la actualizacion del software, y de cargar la configuracion del site, deberia confirmar si es que el nodoB cuenta con la version ya instalada. V200R012C00SPC401

l

Para llo utilizamos el comando LST VER


Page11



Page12


En ciertas ocasiones, el archivo de configuración no ha cargado del todo, para ello se procederá a cargar el archivo de configuración nuevamente. Se hará de la siguiente manera.

l

Maintenance>Software Management>Data Config File Transfer

l

Escoger la opción “”

l

Recordar que cuando se carga un archivo de configuración, el nodo automáticamente se reseteara. Para volver a entrar al nodo tendremos que esperar unos 5 minutos Copyright © 2009 Huawei Technologies Co., Ltd. All rights reserved.

Page13



Page14

COMMISSIONING BTS l

COMISIONAMIENTO DE LA TARJETA GTMU PARA TECNOLGIA GSM

l

Para este comisionamiento se utiliza otro software, en el archivo donde se encuentra el software hay una carpeta llamada “BTSM”


Page15

COMMISSIONING NODE B PUERTO DE MANTENIMIENTO DE LA BTS


Page16

COMMISSIONING BTS

BTS3000V100R012C00SPC039 \BTSM\ENG Y buscamos el programa: Buscamos el programa “btsm.exe” Copyright © 2009 Huawei Technologies Co., Ltd. All rights reserved.

Page17

COMMISSIONING BTS l

Para conectarme la tarjeta GTMU debe cambiar la IP de su laptop a la siguiente.

l

IPADDRESS: 192.168.0.70

l

MASCARA: 255.255.255.0

l

La IP del puerto ETH de la GTMU es:

l

IPADDRESS: 192.168.0.72

l

MASCARA: 255.255.255.0


Page18

COMMISSIONING BTS l

Hacemos doble clic al programa btsm.exe y aparecerá lo siguiente.


Page19

COMMISSIONING BTS l

Antes de hacer cualquier configuración debemos conseguir los derechos para dicha configuración.

l

Para ello vamos en la parte izquierda damos clic a la opción site0>Site Management Right

l

Aparece la siguiente ventana, y hacemos clic en el botón “Get”


Page20

COMMISSIONING BTS l

Después de haber conseguido los derechos damos clic en la opción “Board”

l

Luego, aparecerá dos opciones en la parte derecha, escogemos la opción “Board Configuration”


Page21

COMMISSIONING BTS


Page22

COMMISSIONING BTS


Page23

COMMISSIONING BTS


Page24

COMMISSIONING BTS


Page25

COMMISSIONING BTS


Page26

COMMISSIONING BTS


Page27

COMMISSIONING BTS l

Procederemos a descargar el software en la GTMU


Page28

COMMISSIONING BTS l

Muchas veces no aparece la opción “Forced Software Load” y “Software Activation”; para ello, apretamos el botón “F5” y aparecerá una barra.

l

Colocamos cf17 (“17” significa que son las 5PM, si la hora fuera 06:37PM colocamos “cf18”)


Page29

COMMISSIONING BTS


Page30

COMMISSIONING BTS l

Hacemos clic en la opcion “Forced Software Activation”

l

Buscamos el archivo: gtmudown.pck


Page31

COMMISSIONING BTS l

Colocamos la Versión del software: V100R012C00SP39

El software comenzara a descargarse.


Page32

COMMISSIONING BTS l

Ahora procederemos a descargar el software de las RRUs

l

Buscamos el archivo: mrrudown.pck


Page33

COMMISSIONING BTS l

Escogemos la opcion MRRU_MAIN


Page34

COMMISSIONING BTS l

Ahora procederemos con la Activación del software, tanto de la GTMU y RRU


Page35

COMMISSIONING BTS l

Despues de descargar y activar el software, procedemos a verificar.


Page36

COMMISSIONING BTS


Page37

COMMISSIONING BTS l

Para ver el Seria Number de las RRUs procedemos a buscar la opción “Bar Code Query” y damos click en start.


Page38

COMMISSIONING BTS l

Ahora nos conectamos nuevamente al Nodo B para poner este comando “SET LOADCTRL”

l

SET LOADCTRL: CTRLFLAG=YES, EFTIMMFLAG=NO, SELFVERSION="V200R012C00SPC401", PEERVERSION="BTS3000V100R012C00SPC039";


Page39

COMMISSIONING BTS


Page40

DBS3900 System Overview l

DBS3900 components: p

BBU3900

p

RRU3908, RRU3804, RRU3008

Antenna TMA

RRU3908

RF jumper Grounding cable MBSC

Feeder Power cable

RF jumper

RI cable BBU3900 Grounding cable Trunk cable


Power cable

Page41

Contents 1. DBS3900 system overview 2. BBU hardware structure 3. RRU hardware structure 4. Cable connection 5. Technical specifications of the DBS3900


Page42

Appearance of the BBU3900 l

The BBU3900 has a case structure. It can be installed in a 19-inch-wide and 2 U-high indoor space or outdoor protective cabinet

l

The dimensions of the BBU3900 are 442 mm (width) x 310 mm (depth) x 86 mm (height)


Page43

Logical Structure of the BBU3900 l

The BBU3900 consists of the transport subsystem, baseband subsystem, control subsystem, and power module


Page44

Board Configuration of the BBU3900 l

Slot numbering:

l

Typical board configuration:


Page45

GTMU l

The GSM Transmission, Timing, and Management Unit for BBU (GTMU) controls and manages the entire BTS. It provides interfaces related to the reference clock, power monitoring, OM, and external alarm collection


Page46

GTMU (Cont.) Port RI0 to RI5 ETH

Connector

Description

Type SFP RJ45

Ports for the communication between the BBU and the RF module; input and output of the optical and electrical signal. Port for local maintenance and commissioning. Connects the BBU to a routing device in the equipment room through

FE0

RJ45

the Ethernet cable to transmit network information. Connects the BBU to a routing device in the equipment room through

FE1

DLC

the optical cable to transmit network information.

USB

USB

Enables the automatic software upgrade from a USB disk.

TST

USB

Provides a reference clock for the tester.

DB26

Provides the input and output of the four E1/T1 signals between the

female

GTMU and the UELP or between the GTMU and the BSC.

E1/T1


Page47

WMPT l

The WCDMA Main Processing and Transmission unit is the BBU3900 main control and transmission board that processes the signals and manages the resources for other boards


Page48

WMPT (Cont.) Port

Connector Type

Description

E1/T1

DB26

four E1/T1 signals.

FE0

RJ45

FE electrical port.

FE1

SFP

FE optical port.

GPS

SMA

GPS antenna.

ETH

RJ45

Commissioning Ethernet port.

USB

USB

USB loading port.

TST

USB

USB testing port.


Page49

WBBP l

The WCDMA Baseband Process Unit (WBBP) board processes UL and DL baseband signals

l

The WBBP is classified into WBBPa and WBBPb: Board

Cell

UL CE

DL CE

WBBPa

3

128

256

WBBPb1

3

64

64

WBBPb2

3

128

128

WBBPb3

6

256

256

WBBPb4

6

384

384


Page50

WBBP (Cont.) LED

RUN

Color

Green

ACT

Green

ALM

Red

RI0 to RI2

Red /green

Status

Description

ON

The board has power input, yet the board is faulty.

OFF

The power supply or the board is faulty.

1s ON, 1s OFF

The board is running properly.

0.125s ON, 0.125s OFF

Software is being loaded to the board.

ON


OFF

The WBBP is not in use.

ON

The board has alarms.

OFF


OFF

The optical module is not configured with RI ports or the module is powered off.

ON (green)

The RI link is operational, and the RRU hardware is functional.

ON (red)

The optical module is not in position or the RI link is faulty.

Blinking at 4 Hz (red, 0.125s ON, 0.125s OFF)

The hardware of the RRU connected to the RI link is faulty

Blinking at 0.5 Hz (red, 1s ON, 1s OFF)

The VSWR alarm, antenna alarm, or RRU external alarm occurs

and needs to be replaced.

on the RRU connected to the RI link.


Page51

UBFA l

The Universal BBU Fan type A (UBFA) is the fan unit, and it controls the fan speed, detects the temperature of the fan board, and dissipates the heat in the BBU LED

Color

Status

Description

0.125s ON,

The module is not ed,

0.125s OFF

and no alarm is reported.

Green 1s ON, 1s OFF

STATE

OFF Red 1s ON, 1s OFF


The module is running properly. No alarm is reported. The module is reporting alarms.

Page52

UPEU l

The Universal Power and Environment Interface Unit (UPEU) board provides power for other boards and monitors external alarms

l

The UPEU is classified into UPEUA and UPEUB: p

The UPEUA converts -48 V DC to +12 V DC

p

The UPEUB converts +24 V DC to +12 V DC


Page53

UPEU (Cont.) Connector Type

Quantity

PWR

3V3

1

+24 V/-48 V DC power input.

EXTALM1

RJ45

1

Transmitting four dry alarms.

EXTALM0

RJ45

1

Transmitting four dry alarms.

MON1

RJ45

1

Transmitting one RS485 environment monitoring signal.

MON0

RJ45

1

Transmitting one RS485 environment monitoring signal.

Port

LED RUN

Color Green

Description

Status

Description

ON

The UPEU is operational.

OFF

Power input is unavailable or the board is faulty.


Page54

Optional Boards l

UEIU: p

l

USCU: p

l

The Universal Satellite Card and Clock Unit (USCU) is compatible with six types of satellite card, provides absolute timing information and the 1 Pulse Per Second (PPS) reference clock for the main control board, and provides the RGPS ports and BITS port

UTRP: p

l

The Universal Environment Interface Unit (UEIU) board transmits monitoring signals and alarm signals from external devices to the main control and transmission unit

The Universal Transmission Processing unit (UTRP) board, as the transmission extension board, it provides eight E1s/T1s, or one unchannelized STM-1/OC-3 port, or four FE/GE electrical ports, or two FE/GE optical ports

UBRI: p

The Universal Baseband Radio Interface Board (UBRI) provides extended RI optical or electrical ports to implement convergence, distribution, and multi-mode transmission on the RI


Page55

Optional Boards l

UEIU: p

l

USCU: p

l

The Universal Satellite Card and Clock Unit (USCU) is compatible with six types of satellite card, provides absolute timing information and the 1 Pulse Per Second (PPS) reference clock for the main control board, and provides the RGPS ports and BITS port

UTRP: p

l

The Universal Environment Interface Unit (UEIU) board transmits monitoring signals and alarm signals from external devices to the main control and transmission unit

The Universal Transmission Processing unit (UTRP) board, as the transmission extension board, it provides eight E1s/T1s, or one unchannelized STM-1/OC-3 port, or four FE/GE electrical ports, or two FE/GE optical ports

UBRI: p

The Universal Baseband Radio Interface Board (UBRI) provides extended RI optical or electrical ports to implement convergence, distribution, and multi-mode transmission on the RI


Page56

Contents 1. DBS3900 system overview 2. BBU hardware structure 3. RRU hardware structure 4. Cable connection 5. Technical specifications of the DBS3900


Page57

Contents 3. RRU hardware structure 3.1 RRU3908 hardware structure 3.2 RRU3804 hardware structure


Page58

Appearance of the RRU3908 l

The RRU3908 is an outdoor remote radio unit that processes the baseband signals and the RF signals of the GSM, and processes the RF signals of the UMTS

-48 V DC RRU Copyright © 2009 Huawei Technologies Co., Ltd. All rights reserved.

+220V AC RRU Page59

Logical Structure of the RRU3908


Page60

s of the DC RRU module l

The RRU module has a bottom , a cabling cavity , and an area attached with LEDs


Page61

s of the DC RRU module l



Page62

s of the AC RRU module l



Page63

s of the AC RRU module l



Page64

Contents 3. RRU hardware structure 3.1 RRU3908 hardware structure 3.2 RRU3804 hardware structure


Page65

Appearance of the RRU3804 l

The RRU3804 is an outdoor remote radio unit that processes the RF signals of the UMTS

-48 V DC RRU Copyright © 2009 Huawei Technologies Co., Ltd. All rights reserved.

Page66

Logical Structure of the RRU3804


Page67

s of the RRU3804 l

The RRU3804 has a bottom , a cabling cavity , and an LED


Page68

s of the RRU3804 l

The RRU3804 has a bottom , a cabling cavity , and an LED


Page69

Contents 1. DBS3900 System Overview 2. BBU Hardware Structure 3. RRU Hardware Structure 4. Cable connection 5. Technical Specifications of the DBS3900


Page70

RI Interconnection Type l

Scenario 1:


Page71

RI Interconnection Type ( Cont.) l

Scenario 2:


Page72

Transmission Cable Connection l

E1 cable connection:


Page73

Transmission Cable Connection (Cont.) l

FE/GE cable connection:


Page74

Contents 1. DBS3900 System Overview 2. BBU Hardware Structure 3. RRU Hardware Structure 4. Cable connection 5. Technical Specifications of the DBS3900


Page75

Specification of Engineering Item

Specification BBU3900: 86 mm × 442mm × 310 mm

Dimensions (height x width x depth)

RRU3908: 485mm × 380mm × 170mm (with the housing) RRU3908: 480mm × 356mm × 140mm (without the housing) RRU3804: 485 mm x 285 mm x 170 mm (with the housing) RRU3804: 480 mm x 270 mm x 140 mm (without the housing) BBU3900: 12 kg (in full configuration) BBU3900: 7 kg (in typical configuration)

Weight

RRU3908: 21 kg (without the housing) RRU3908: 23 kg (with the housing) RRU3804: 15 kg (without the housing) RRU3804: 17 kg (with the housing)


Page76

Specification of Capacity Item BBU3900 (GSM)

Specification S24/24/24 S8/8/8

BBU3900 (UMTS)

1,536 CEs in the UL and 1,536 CEs + 15 × 24 HSDPA codes in the DL GSM S24/24/24+UMTS S8/8/8

BBU3900 (GSM+UMTS)

1,536 CEs in the UL and 1,536 CEs + 15 × 24 HSDPA codes in the DL

RRU3908 (3GPP class2: GSM) RRU3908 (3GPP class2: GSM +UMTS)

6TRX per RRU3908 G5U1 or G4U2

RRU3908 (3GPP class2: UMTS)

4 carriers per RRU3908

RRU3908 (ETSI: GSM)

6 TRX per RRU3908

RRU3908 (ETSI: GSM+UMTS)

G3U2

RRU3804

4 carriers per RRU3804


Page77

Specification of Frequency Band RRU

Frequency band

935 to 960

880 to 905

925 to 950

824 to 849

869 to 894

1,710 to 1,755

1,805 to 1,850

1,740 to 1,785

1,835 to 1,880

1,850 to 1,890

1,930 to 1,970

1,870 to 1,910

1,950 to 1,990

Band I (2100 MHz)

1,920 to 1,980

2,110 to 2,170

Band II (1900 MHz)

1,850 to 1,910

1,930 to 1,990

Band IV (AWS)

1,710 to 1,755

2,110 to 2,155

Band V/VI (850 MHz)

824 to 849

869 to 894

850 MHz 1800 MHz

1900 MHz

RRU3804

TX band (MHz)

890 to 915

900 MHz

RRU3908

RX band (MHz)


Page78

Specification of Output Power l

The typical configuration of RRU3908 in compliance with the specifications for multi-carrier base station (Class2) in 3GPP TS 45.005 V8.2.0

Number of

Number of

Output Power per

Output Power per

GSM Carriers

UMTS Carriers

GSM Carrier (W)

UMTS Carrier (W)

1/2/3/4/5/6

0/0/0/0/0/0

40/40/20/15/12/10

0/0/0/0/0/0

1/1/1

1/1/2

40/30/30

30/40/20

2/2/2

1/1/2

20/15/15

30/40/20

3

2

10

10

4/4

1/2

7.5

20/10

5

1

6

20

0/0/0/0

1/2/3/4

0/0/0/0

40/30/20/15


Page79

Specification of Output Power l

The typical configuration of RRU3908 in compliance with the specifications for multi-carrier base station (Class2) in 3GPP TS 45.005 V8.2.0

Number of

Number of

Output Power per

Output Power per

GSM Carriers

UMTS Carriers

GSM Carrier (W)

UMTS Carrier (W)

1/2/3/4/5/6

0/0/0/0/0/0

40/40/20/15/12/10

0/0/0/0/0/0

1/1/1

1/1/2

40/30/30

30/40/20

2/2/2

1/1/2

20/15/15

30/40/20

3

2

10

10

4/4

1/2

7.5

20/10

5

1

6

20

0/0/0/0

1/2/3/4

0/0/0/0

40/30/20/15


Page80

Specification of Output Power (Cont.) l

The typical configuration of RRU3908 in compliance with ETSI TS 100 910 V8.20.0 Number of

Number of

Output Power per

Output Power per

GSM Carriers

UMTS Carriers

GSM Carrier (W)

UMTS Carrier (W)

1/2/3/4/5/6

0/0/0/0/0/0

20/20/15/15/10/10 0/0/0/0/0/0

1/1

1/2

20/20

40/20

2/2

1/2

15/10

30/20

3/3

1/2

10/10

30/15

0/0/0/0

1/2/3/4

0/0/0/0

40/30/20/15


Page81

Specification of Output Power (Cont.) l

The RRU3804 s 4 carriers, and the output power at the antenna connector is 60 W p

One-carrier configuration: 60 W per carrier

p

Two-carrier configuration: 30 W per carrier (in 1001 configuration: 20 W per carrier)

p

Three-carrier configuration: 20 W per carrier

p

Four-carrier configuration: 15 W per carrier


Page82

Glossary l

3GPP: 3rd Generation Partnership Project

l

CE: Channel Elements

l

RI: Common Public Radio Interface

l

ETSI: European Telecommunications Standards Institute

l

RET: Remote Electrical antenna Tilt

l

TMA: Tower Mounted Amplifier


Page83

Thank you www.huawei.com

Commissioning Bts And Node B 1w3v4y

Overview 26281t

More details 6y5l6z

Related Documents 3h463d

Commissioning Bts And Node B 1w3v4y

Bts Or Node B Rehoming 3l5k3g

Ericsson Node B Commissioning And Integration 4x422u

Bts Commissioning 70w6e

Node B 3d71e

Bts Commissioning Alcatel Lucent 5d5x6p