Coupling 284k63

TABLE OF CONTENTS ROBAR

TAB

SECTION CONTENTS

0

Forward

0.1.1

1

Couplings, End Caps, and Accessories

1.0.1

2

Saddles (Service and Isolating)

2.0.1

3

Sewer Saddles

3.0.1

4

Restrainers

4.0.1

5

Repair Clamps

5.0.1

6

Tapping Sleeves, Outlet Sleeves

6.0.1

7

Flanged Coupling Adapters

7.0.1

8

Expansion ts

8.0.1

9

Miscellaneous, (Drilling Machine, Meter Couplings, Adjustable Inserts).

9.0.1

Glossary, Notes and Index

10.0.1

10

ROBAR INDUSTRIES LTD.

B.C.

Phone: Fax: E-mail:

Page

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: January 1, 2000

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

0.0.1

FORWARD ROBAR

Table of Contents

0.0.1

Section Contents - FORWARD

0.1.1

and Conditions of Sale

0.4.1

Warranty

0.5.0

ROBAR'S Standard Material Specifications

0.7.1

Gasket Selection Chart

0.8.0

Pipe Outside Diameter Chart

0.9.1

ROBAR INDUSTRIES LTD.

B.C.

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: January 1, 2000

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

0.1.1

AND CONDITIONS OF SALE ROBAR

ROBAR, as used herein, means Robar Industries Ltd. a British Columbia Corporation and Les Produits Industriels Robar Inc. a Quebec Corporation. ENTIRE AGREEMENT. The and conditions stated here constitute the entire Agreement between the parties and any contrary or additional and conditions shall be of no effect unless agreed to in writing by an authorized officer of ROBAR. PRICES. All prices are stated F.O.B. ROBAR's shipping warehouse and are subject to change without notice. Prices in effect at time of shipping will apply unless prior written quotation was obtained. FREIGHT. All shipments to purchaser will be freight collect or prepaid-and-charge, unless the shipment qualifies for freight allowance as stated in the Freight Allowance Policy. OF PAYMENT. All invoices are due within 30 days. A 2% prompt pay discount may be calculated on the before-tax amount and deducted if paid within 20 days from date of invoice. DELIVERIES AND DELAYS. Normal deliveries are 14 to 28 days from date of order received. ROBAR shall not be held liable for any delay or default in delivery of products arising out of or resulting from any cause beyond the control of ROBAR. This includes armed conflict or economic dislocation resulting therefrom; embargoes, shortage of labor or work stoppage beyond the control of ROBAR; shortages of raw materials, fuel, energy, production facilities or transportation; civil disorders of any kind; fires; floods; disaster and accidents. TAXES. All prices are stated before taxes. Taxes will be added when applicable and are the responsibility of the purchaser. RETURNED GOODS. No returned goods will be accepted without prior authorization. All goods approved for return will be subject to a 35% minimum restocking charge. Products made to the purchaser's specification and requiring special materials or sizing may not be returned. CANCELLATION OF ORDERS. Any orders that are canceled will be subject to charges to the extent of the amount of labour and material already expended. Cancellation of orders already in transit will not be accepted and will be subject to the Returned Goods Policy stated above. DISCLAIMER. ROBAR warrants its products only against defects in materials and workmanship. ROBAR's liability is expressly limited to repayment of the purchase price, repair, or replacement. ROBAR reserves the right to furnish substitutes for materials which cannot be reasonably obtained because of reasons beyond ROBAR's control. TITLE AND RISK. Title and risk of loss or damage to the goods shipped es to the customer upon delivery to the carrier regardless of who pays the shipping costs. WARRANTY. See ROBAR's One Year Limited Warranty.

ROBAR INDUSTRIES LTD.

B.C.

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: January 1, 2000

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

0.4.1

WARRANTY ROBAR

ONE YEAR LIMITED WARRANTY All products manufactured and sold by ROBAR Industries Ltd. are warranted to be free from defects in material and factory workmanship for a period of one year from purchase. Under this warranty, ROBAR has the option to adjust, repair or replace the defective products. Any claim for shortages or damage in transit must be made directly with the carrier. Any claims for shortages of parts must be made within three days of receiving shipment and only if such shortages and/or damage are noted on the carrier's Bill of Lading. ROBAR will not be liable for any consequential, incidental or other damages or injuries incurred by the purchaser or the of products manufactured and sold by ROBAR. All claims for breach of warranty must be made in writing immediately upon discovery and sent to the Head Office of the company in Surrey, B.C., Canada. Any defective products must be held for inspection by a ROBAR representative. ROBAR does not make any warranty of the merchantability or the fitness of the products and/or parts manufactured and sold. Any references by ROBAR to the purchaser's specifications or requirements are strictly for identification purposes and the onus remains entirely on the buyer to select the appropriate product to fit an application. ROBAR does not warranty any products if they are used in an application other than what they are intended for. This warranty may not be changed except by agreement in writing signed by an officer of ROBAR Industries Ltd.

ROBAR INDUSTRIES LTD.

B.C.

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: January 1, 2000

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

0.5.0

ROBAR'S STANDARD MATERIAL SPECIFICATIONS

ROBAR

Cast Gray Iron ........................................................................ASTM A48 Grade 30 Ductile Iron .....................................................................ASTM A536-80 (65-45-12) Bronze ..........................................................................ASTM B62 (85-5-5-5) & AWWA C-800 Stainless Steel ...............................................................ASTM A743-70 Grade CF-8 (T304) ASTM A743-70 Grade CF-8M

Fabricated Stainless Steel ...............................................................ASTM A743-70 Grade CF-8 (T304) ASTM A743-70 Grade CF-8M Mild Steel .......................................................................ASTM A36 & ASTM A-7 Bronze ..........................................................................ASTM B53-46 Alloy A

Rubber SBR (BUNA S) ...............................................................AWWA C111, ANSI 21.11 ASTM D2000 80 M 4AA 809 NBR (BUNA N)...............................................................ASTM D2000 BA 508 Neoprene ......................................................................ASTM D2000 EPDM ..........................................................................ASTM D2000 Viton ..........................................................................ASTM D1418

Fasteners Alloy Steel ......................................................................AWWA C111 & AISI 140 (HSLA) Steel ..........................................................................ASTM A320 Grade B8 Stainless Steel ...............................................................ASTM A743-70 Grade CF-8 (T304) ASTM A-70 Grade CF 8M Bronze ..........................................................................ASTM A98 Alloy B Cast Iron.........................................................................AWWA C111 Zinc plating.....................................................................AISI 40 Anodes ..........................................................................ASTM B418 Type II

Coatings Epoxy fusion bond..........................................................Corrosion Protective Epoxy Coating (AWWA C213-79) Epoxy coal tar ................................................................AWWA C210-78

Couplings

AISI ANSI ASTM AWWA

Note:

..........................................................................AWWA C219-91

American Industrial Standards Institute. American National Standards Institute. American Society for Testing and Materials, Philadelphia, PA. American Water Works Association, Denver, CO.

Products can be made to customer specifications; call ROBAR.

ROBAR INDUSTRIES LTD.

B.C.

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: January 1, 2000

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

0.7.1

GASKETS RUBBER PRODUCT INFORMATION

ROBAR

ROBAR GASKET SELECTION CHART MAXIMUM SERVICE 1,2,3 TEMPERATURE (ºF)

COMMON USES

SBR (Styrene Butadiene) (Buna S)

150º

Fresh water, salt water, sanitary sewage

Nitrile (NBR) (Acrylonitrile Butadiene) (BUNA-N)

150º

Hydrocarbons, fats, oils, greases, chemicals 4

Neoprene® (CR) (Polychloroprene)

200º

Fresh water, salt water, sanitary sewage

EPDM (Ethylene Propylene)

250º

Fresh water, salt water, sanitary sewage, hot water

300º

Hydrocarbons, acids, vegetable oils, petroleum

DESCRIPTION

Viton4®; Fluorel® (FPM)4 (Fluorocarbon)

Note:

1. Maximum service temperatures listed are intended as general guidelines. 2. For service temperatures greater than those listed, consult ROBAR for specific recommendations. 3. Minimum service temperature is not usually a meaningful parameter for piping gaskets; however, low temperatures during pipeline installation may necessitate precautions. Consult ROBAR for pertinent recommendations. 4. Not recommended for Toluene or Benzene.

ROBAR INDUSTRIES LTD.

B.C.

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: January 1, 2000

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

0.8.0

CHART PIPE OUTSIDE DIAMETERS

ROBAR

PIPE OUTSIDE DIAMETERS (OD) CHART NOMINAL SIZE

STEEL SIZE

DUCTILE SIZE

CAST SIZE

STD. IPS C900 DUCTILE STEEL PVC C905* IRON PVC

ASBESTOS CEMENT SIZE

CAST IRON

A/C ME

A/C RB CLASS 100

A/C RB CLASS 150

A/C RB CLASS 200

3.96

3.74 (100) 3.84 (150)

3.93 - 3.95

4.03 - 4.13

4.17 - 4.29

4.80

5.00

4.64 (100) 4.81 (150)

4.70 - 5.26

4.97 - 5.32

5.22 - 5.57

6.63

6.90

7.10

6.91

7.05 - 7.48

7.10 - 7.43

7.23 - 7.60

200

8.63

9.05

9.30

9.11

9.22 - 9.75

9.39 - 9.75

9.39 - 9.81

10

250

10.75

11.10

11.40

10.89 - 11.66 11.25 - 11.83 11.85 - 12.26 11.77 - 12.31

12

300

12.75

13.20

13.50

12.99 - 13.92 13.37 - 14.10 14.10 - 14.35 14.03 - 14.55

14

350

14.00

15.30*

15.65

15.07 - 16.22 15.26 - 15.89 16.41 - 16.85 16.41 - 16.95

16

400

16.00

17.40*

17.80

17.15 - 18.62 17.34 - 18.03 18.62 - 19.20 18.65 - 19.30

18

450

18.00

19.50*

19.92

19.90 - 22.18 20.55 - 20.65 21.26 - 22.56 19.80 - 23.14

20

500

20.00

21.60*

22.06

22.12 - 24.66

24

600

24.00

25.80*

26.32

26.48 - 29.62 27.15 - 27.30 28.32 - 28.75

IN.

MM.

2

50

2.38

2.5

65

2.88

3

75

3.50

4

100

4.50

6

150

8

3.80

ROBAR INDUSTRIES LTD.

B.C.

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: January 1, 2000

22.68

22.96 - 23.64 25.02 - 25.42 29.98

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

0.9.1

SECTION 1 - CONTENTS ROBAR

COUPLINGS

STRAIGHT AND TRANSITION COUPLINGS Table

1.1.2

1408

Enamel coated, HSLA Steel Fasteners

1.2.0

1406

Enamel coated, T304 SS Fasteners

1.3.1

1506

Epoxy coated, T304 SS Fasteners

1.4.0

1507

Epoxy coated, HSLA Fasteners, w/ Anodes

1.5.1

1509

Epoxy coated, HSLA Fasteners

1.6.0

1519

Epoxy coated, HSLA Fasteners, cathodically protected

1.7.1

1706

Rapid Fit, Epoxy Coated, T304 SS Fasteners

1.52.1

1708

Rapid Fit, Epoxy Coated, Dacroment Fasteners

1.52.2

1716

Rapid Fit Plus, Epoxy Coated, T304 SS Fasteners

1.53.1

1718

Rapid Fit Plus, Epoxy Coated, Dacroment Fasteners

1.53.2

REDUCING COUPLINGS Table

1.10.2

1408R

Enamel coated, HSLA Fasteners

1.12.0

1406R

Enamel coated, T304 SS Fasteners

1.13.1

1506R

Epoxy coated, T304 SS Fasteners

1.14.0

1507R

Epoxy coated, HSLA Fasteners, w/Anodes

1.15.1

1509R

Epoxy coated, HSLA Fasteners

1.16.0

1519R

Epoxy coated, HSLA Fasteners, cathodically protected

1.17.1

CAST COUPLING ACCESSORIES 1120

Special Coupling Gaskets

1.20.0

1180

Isolating Boots

1.21.1

1410

Coupling End Caps

1.22.0

FABRICATED COUPLINGS 1606

Fabricated Stainless Steel Couplings

1.50.1

1808

Fabricated Steel Couplings

1.61.1

1838

Fabricated Transition Couplings

1.62.1

1848

Fabricated Steel Reducing Couplings

1.63.1

1858

Fabricated Long Sleeve Reducing Couplings

1.64.1

ROBAR INDUSTRIES LTD.

B.C.

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: November 18, 2003

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

1.0.1

CAST DUCTILE IRON COUPLINGS STRAIGHT & TRANSITION SELECTION TABLE

ROBAR

FIRST END RANGE END BY PIPE CODE X LOW OD HIGH*

NOM. PIPE SIZE

(Actual)

2

2.38

2.38

SECOND END MAX. RANGE PRESS. FASTENERS END PIPE (Working) NO. CODE LOW OD HIGH* LBS./IN.2 DIA. x LENGTH

SHIPPING SLEEVE WT.*** LENGTH (IN.) (LBS.) (KG.)

(Actual)

2.50

X

2.38

2.38

2.85 2.85 3.13 X 3.45 3.50 3.45 3.50 3.55 3.74 3.74 3.92 3.45 3.50 3.45 3.50 3.60 4T 3.75 3.75 4.05 F3 4.05 4.05 4.35 F3 4 X 4.40 4.50 4.40 4.50 4.60 D3 4.74 4.80 4.74 4.80 5.10 A1 5.10 5.10 5.30 E5 5.85 6.00 5.85 6.00 6.15 F3 6.15 6.15 6.45 F3 6 6.50 6.63 X 6.50 6.63 6.70 D3 6.86 6.90 6.86 6.90 7.10 A1 7.15 7.15 7.35 E5 7.90 8.00 7.90 8.00 8.25 F3 8.25 8.25 8.55 F3 8 8.55 8.63 X 8.55 8.63 8.75 D3 8.99 9.05 8.99 9.05 9.30 A1 9.30 9.30 9.50 E5 9.85 10.00 10.20 F4 9.85 10.00 10.20 10.20 10.50 F4 10.60 10.75 10.90 D4 10.60 10.75 10** X 11.10 11.10 11.40 B2 11.10 11.10 11.55 11.55 11.75 A1 11.90 12.00 12.10 E5 11.90 12.00 SERIES 2 (STANDARD STEEL AND DUCTILE SIZES ONLY) 10.60 10.75 10.90 S9 X 10.60 10.75 10 11.10 11.10 11.40 G8 11.10 11.10 3

2.50 3.13 3.55 3.92 3.60 4.05 4.35 4.60 5.10 5.30 6.15 6.45 6.70 7.10 7.35 8.25 8.55 8.75 9.30 9.50 10.20 10.50 10.90 11.40 11.75 12.10

F3 F3 D3 A1 E5 F3 F3 D3 A1 E5 F3 F3 D3 A1 E5 F4 F4 D4 B2 A1 E5

10.90 11.40

S9 G8

175

2 5/8 x 5

5

8

3.6

175

3 5/8 x 5

5

11

5.0

4 5/8 x 8

5

17

7.7

4 5/8 x 10.5

7

20

9.0

5 5/8 x 8

5

25

11.3

5 5/8 x 10.5

7

33

14.9

6 5/8 x 8

5

30

13.6

6 5/8 x 10.5

7

39

17.7

175

7 5/8 x 10.5

7

59

26.8

175

7 5/8 x 10.5

7

49

22.3

175

175

175

All dimensions are in inches

CAST COUPLING CONFIGURATIONS: 1406: Enamel coated Center Sleeve and End Rings, Stainless Steel Fasteners. 1408: Enamel coated Center Sleeve and End Rings, HSLA Steel Fasteners. 1506: Epoxy coated Center Sleeve and End Rings, Stainless Steel Fasteners. 1507: Similar to 1509 but complete with Anodes. 1509: Epoxy coated Center Sleeve and End Rings, Epoxy coated HSLA Steel bolts. 1519: Similar to 1509 but designed for cathodically protected applications. Continued... Note:

* The high limit of the range is used in the ordering code. ** Some transitions may require a stepped center sleeve. *** Shipping weights are approximate and vary according to configuration.

ROBAR INDUSTRIES LTD.

B.C.

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: January 1, 2000

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

1.1.2

CAST DUCTILE IRON COUPLINGS STRAIGHT & TRANSITION SELECTION TABLE

ROBAR

FIRST END RANGE END BY PIPE CODE X LOW OD HIGH*

NOM. PIPE SIZE

(Actual)

SECOND END MAX. RANGE PRESS. FASTENERS END PIPE (Working) NO. CODE LOW OD HIGH* LBS./IN.2 DIA. x LENGTH

SHIPPING SLEEVE WT.*** LENGTH (IN.) (LBS.) (KG.)

(Actual)

12.00 12.00 12.30 F4 12.30 12.30 12.60 F4 12.60 12.75 12.90 D4 X 12.60 12.75 12** 13.20 13.20 13.60 B2 13.20 13.20 13.80 14.00 14.10 A1 13.80 14.00 14.10 14.10 14.35 E5 SERIES 2 (STANDARD STEEL AND DUCTILE SIZES ONLY) 12.60 12.75 12.90 S9 12.60 12.75 12 X 13.20 13.20 13.50 G8 13.20 13.20 14.60 14.60 14.90 F2 15.30 15.30 15.70 B2 15.30 15.30 14 X 15.80 16.00 16.25 A1 15.80 16.00 16.40 16.40 16.80 E5 17.40 17.40 17.80 B2 17.40 17.40 16 X 17.80 18.00 18.20 A1 17.80 18.00 18.40 18.40 18.80 E5 18.80 18.80 19.20 B1 18 19.10 19.50 19.70 A2 X 19.10 19.50 19.70 20.00 20.25 E5 19.70 20.00 20.80 20.80 21.35 B1 20 21.35 21.60 21.75 A2 X 21.35 21.60 21.75 22.00 22.25 E5 21.75 22.00 22.95 22.95 23.35 B1 22 23.45 X 23.45 23.85 A2 23.75 24.00 24.25 E5 23.75 24.00 25.70 25.80 A2 25.70 25.80 26.00 24 X 26.10 26.10 26.32 E5

12.30 12.60 12.90 13.60 14.10 14.35

F4 F4 D4 B2 A1 E5

12.90 13.50 14.90 15.70 16.25 16.80 17.80 18.20 18.80 19.20 19.70 20.25 21.35 21.75 22.25 23.35 23.85 24.25 26.00 26.32

S9 G8 F2 B2 A1 E5 B2 A1 E5 B1 A2 E5 B1 A2 E5 B1 A2 E5 A2 E5

175

8 5/8 x 10.5

7

74

33.6

175

8 5/8 x 10.5

7

55

25.0

175

9 5/8 x 10.5

7

100

45.5

175

10 5/8 x 10.5

7

107

48.6

150

12 5/8 x 10.5

7

129

58.6

150

12 5/8 x 10.5

7

140

63.6

150

13 5/8 x 10.5

7

156

70.9

150

14 5/8 x 14.0

10

285

129.6

All dimensions are in inches

HOW TO ORDER: Determine the product number (1408, etc.) and high limit of range for each end of the coupling (see page 1.1.2, 1.1.3), and then use the appropriate ordering code as shown in the following example. To couple a 6" Steel pipe (6.63" OD) to a 6" C900 PVC pipe (6.90" OD), the ordering code is: 1408 6.70" x 7.10" product number

first end high limit of range

second end high limit of range

i.e. 1408 - 6.70 x 7.10 Note:

* The high limit of the range is used in the ordering code. ** Some transitions may require a stepped center sleeve. *** Shipping weights are approximate and vary according to configuration.

ROBAR INDUSTRIES LTD.

B.C.

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: January 1, 2000

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

1.1.3

1408 CAST DUCTILE IRON COUPLINGS STRAIGHT AND TRANSITION PRODUCT INFORMATION

ROBAR

SIZES AVAILABLE: 2" to 24" Nominal Pipe OD. APPLICATIONS: ROBAR 1408 Straight and Transition Couplings are used to make a non-restrained connection between two pipes of the same nominal size but with same or different OD's.

MATERIAL SPECIFICATION: - COUPLING CONFORMS TO AWWA C219 - 91 Center Sleeve: Cast Ductile Iron (ASTM A536). End Rings: Cast Ductile Iron (ASTM A536). Gaskets: SBR (Buna S) Rubber (AWWA C111). Other compounds available. Fasteners: 5/8" NC HSLA Steel (AWWA C111). Coating: Two coats of Enamel. OTHER CAST COUPLING CONFIGURATIONS: (See Product Information for each of the following) 1406: Enamel coated Center Sleeve and End Rings, Stainless Steel Fasteners. 1506: Epoxy coated Center Sleeve and End Rings, Stainless Steel Fasteners. 1507: Similar to 1509 but complete with Anodes. 1509: Epoxy coated Center Sleeve and End Rings, Epoxy coated HSLA Steel bolts. 1519: Similar to 1509 but designed for cathodically protected applications. HOW TO ORDER: Determine the product number (1408, etc.) and the high limit of range for each end of the coupling (see page 1.1.2, 1.1.3), and then use the appropriate ordering code as shown in the following example. To couple a 6" Steel pipe (6.63" OD) to a 6" C900 PVC pipe (6.90" OD), the ordering code is: 1408 6.70" x 7.10" product number

first end high limit of range

second end high limit of range

i.e. 1408 - 6.70 x 7.10

ROBAR INDUSTRIES LTD.

B.C.

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: January 1, 2000

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

1.2.0

1406 CAST DUCTILE IRON COUPLINGS STRAIGHT AND TRANSITION PRODUCT INFORMATION

ROBAR

SIZES AVAILABLE: 2" to 24" Nominal Pipe OD. APPLICATIONS: ROBAR 1406 Straight and Transition Couplings are used to make a non-restrained connection between two pipes of the same nominal size but with same or different OD's. Used in areas where bolt corrosion is a factor. The 1406 is supplied with Stainless Steel fasteners.

MATERIAL SPECIFICATION: - COUPLING CONFORMS TO AWWA C219 - 91 Center Sleeve: Cast Ductile Iron (ASTM A536). End Rings: Cast Ductile Iron (ASTM A536). Gaskets: SBR (Buna S) Rubber (AWWA C111). Other compounds available. Fasteners: 5/8" NC T304 Stainless Steel (ASTM A743). Coating: Two coats of Enamel. OTHER CAST COUPLING CONFIGURATIONS: (See Product Information for each of the following) 1408: Enamel coated Center Sleeve and End Rings, HSLA Steel Fasteners. 1506: Epoxy coated Center Sleeve and End Rings, Stainless Steel Fasteners. 1507: Similar to 1509 but complete with Anodes. 1509: Epoxy coated Center Sleeve and End Rings, Epoxy coated HSLA Steel bolts. 1519: Similar to 1509 but designed for cathodically protected applications. HOW TO ORDER: Determine the product number (1406, etc.) and the high limit of range for each end of the coupling (see page 1.1.2, 1.1.3), and then use the appropriate ordering code as shown in the following example. To couple a 6" Steel pipe (6.63" OD) to a 6" C900 PVC pipe (6.90" OD), the ordering code is: 1406 6.70" x 7.10" product number

first end high limit of range

second end high limit of range

i.e. 1406 - 6.70 x 7.10

ROBAR INDUSTRIES LTD.

B.C.

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: January 1, 2000

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

1.3.1

1506 CAST DUCTILE IRON COUPLINGS STRAIGHT AND TRANSITION PRODUCT INFORMATION

ROBAR

SIZES AVAILABLE: 2" to 24" Nominal Pipe OD. APPLICATIONS: ROBAR 1506 Straight and Transition couplings are used to make a non-restrained connection between two pipes of the same nominal size but with same or different ODs. Used in areas where corrosion is a factor, the 1506 body is Epoxy coated and Stainless Steel fasteners are supplied.

MATERIAL SPECIFICATION: - COUPLING CONFORMS TO AWWA C219 - 91 Center Sleeve: Cast Ductile Iron (ASTM A536). End Rings: Cast Ductile Iron (ASTM A536). Gaskets: SBR (Buna S) Rubber (AWWA C111). Other compounds available. Fasteners: 5/8" NC T304 Stainless Steel (ASTM A743). Coating: Corrosion Protective Epoxy coating (AWWA C213-79). OTHER CAST COUPLING CONFIGURATIONS: (See Product Information for each of the following) 1406: Enamel coated Center Sleeve and End Rings, Stainless Steel Fasteners. 1408: Enamel coated Center Sleeve and End Rings, HSLA Steel Fasteners 1507: Similar to 1509 but complete with Anodes. 1509: Epoxy coated Center Sleeve and End Rings, Epoxy coated HSLA Steel bolts. 1519: Similar to 1509 but designed for cathodically protected applications. HOW TO ORDER: Determine the product number (1506, etc.) and the high limit of range for each end of the coupling (see page 1.1.2, 1.1.3), and then use the appropriate ordering code as shown in the following example. To couple a 6" Steel pipe (6.63" OD) to a 6" C900 PVC pipe (6.90" OD), the ordering code is: 1506 6.70" x 7.10" product number

first end high limit of range

second end high limit of range

i.e. 1506 - 6.70 x 7.10

ROBAR INDUSTRIES LTD.

B.C.

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: January 1, 2000

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

1.4.0

1507 CAST DUCTILE IRON COUPLINGS STRAIGHT AND TRANSITION COMPLETE WITH ANODES PRODUCT INFORMATION

ROBAR

SIZES AVAILABLE: 2" to 24" Nominal Pipe OD. APPLICATIONS: ROBAR 1507 Straight and Transition Couplings are used to make a non-restrained connection between two pipes of the same nominal size but with same or different OD's. Used in areas where corrosion is a factor, the 1507 body and fasteners are Epoxy coated. Zinc anodes are supplied with this coupling.

MATERIAL SPECIFICATION: - COUPLING CONFORMS TO AWWA C219 - 91 Center Sleeve: Cast Ductile Iron (ASTM A536) End Rings: Cast Ductile Iron (ASTM A536) Gaskets: SBR (Buna S) Rubber (AWWA C111). Other compounds available. Fasteners: 5/8" NC HSLA Steel, Epoxy coated bolts (AWWA C111). Coating: Corrosion Protective Epoxy coating (AWWA C213-79). Anodes: Zinc (ASTM B418 Type II) 300 grams minimum. OTHER CAST COUPLING CONFIGURATIONS: (See Product Information for each of the following) 1406: Enamel coated Center Sleeve and End Rings, Stainless Steel Fasteners. 1408: Enamel coated Center Sleeve and End Rings, HSLA Steel Fasteners 1506: Epoxy coated Center Sleeve and End Rings, Stainless Steel Fasteners 1509: Epoxy coated Center Sleeve and End Rings, Epoxy coated HSLA Steel bolts. 1519: Similar to 1509 but designed for cathodically protected applications. HOW TO ORDER: Determine the product number (1507, etc.) and the high limit of range for each end of the coupling (see page 1.1.2, 1.1.3), and then use the appropriate ordering code as shown in the following example. To couple a 6" Steel pipe (6.63" OD) to a 6" C900 PVC pipe (6.90" OD), the ordering code is: 1507 6.70" x 7.10" product number

first end high limit of range

second end high limit of range

i.e. 1507 - 6.70 x 7.10

Note:

• Coupling nuts are not Epoxy coated. We ensure continuity by removing the Epoxy coating from the underside of the bolt head and bolt head bearing surface of the end ring.

ROBAR INDUSTRIES LTD.

B.C.

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: January 1, 2000

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

1.5.1

1509 CAST DUCTILE IRON COUPLINGS STRAIGHT AND TRANSITION PRODUCT INFORMATION

ROBAR

SIZES AVAILABLE: 2" to 24" Nominal Pipe OD. APPLICATIONS: ROBAR 1509 Straight and Transition Couplings are used to make a non-restrained connection between two pipes of the same nominal size but with same or different ODs. Used in areas where corrosion is factor, the 1509 body and fasteners are Epoxy coated.

MATERIAL SPECIFICATION: - COUPLING CONFORMS TO AWWA C219 - 91 Center Sleeve: Cast Ductile Iron (ASTM A536). End Rings: Cast Ductile Iron (ASTM A536). Gaskets: SBR (Buna S) Rubber (AWWA C111). Other compounds available. Fasteners: 5/8" NC HSLA Steel, Epoxy coated bolts (AWWA C111). Coating: Corrosion Protective Epoxy coating (AWWA C213-79). OTHER CAST COUPLING CONFIGURATIONS: (See Product Information for each of the following) 1406: Enamel coated Center Sleeve and End Rings, Stainless Steel Fasteners. 1408: Enamel coated Center Sleeve and End Rings, HSLA Steel Fasteners. 1506: Epoxy coated Center Sleeve and End Rings, Stainless Steel Fasteners. 1507: Similar to 1509 but complete with Anodes. 1519: Similar to 1509 but designed for cathodically protected applications. HOW TO ORDER: Determine the product number (1509, etc.) and the high limit of range for each end of the coupling (see page 1.1.2, 1.1.3), and then use the appropriate ordering code as shown in the following example. To couple a 6" Steel pipe (6.63" OD) to a 6" C900 PVC pipe (6.90" OD), the ordering code is: 1509 6.70" x 7.10" product number

first end high limit of range

second end high limit of range

i.e. 1509 - 6.70 x 7.10

ROBAR INDUSTRIES LTD.

B.C.

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: January 1, 2000

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

1.6.0

1519 CATHODICALLY FITTED COUPLINGS STRAIGHT AND TRANSITION CAST DUCTILE IRON PRODUCT INFORMATION

ROBAR

SIZES AVAILABLE: 2" to 24" Nominal Pipe OD. APPLICATIONS: ROBAR 1519 non-restrained Couplings are specially designed (cathodically fitted) to allow for electrical continuity throughout the entire fitting. Sacrificial anodes* are recommended to protect the coupling assembly as long as "continuity" is maintained between the coupling components. To ensure "isolation" between metal pipes, the use of ROBAR 1180 Isolation Boots is recommended. (See "ROBAR 1180 Isolation Boot" product information sheet, page 1.21.1). Isolation Boots are available in Straight, Transition or Reducing styles. * Anodes not supplied.

MATERIAL SPECIFICATION: - COUPLING CONFORMS TO AWWA C219 - 91 Center Sleeve: Cast Ductile Iron (ASTM A536). End Rings: Cast Ductile Iron (ASTM A536). Gaskets: SBR (Buna S) Rubber (AWWA C111). Other compounds available. Fasteners: 5/8" NC HSLA Steel, Epoxy coated bolts (AWWA C111). ¼” Zinc plated set screws Coating: Corrosion Protective Epoxy coating (AWWA C213-79). OTHER CAST COUPLING CONFIGURATIONS: (See Product Information for the following) 1529: Designed for cathodically protected applications using mechanically attached (Formerly designated as 1519E)

anodes.

HOW TO ORDER: Determine the product number (1519, etc.) and the high limit of range for each end of the coupling (see page 1.1.2, 1.1.3), and then use the appropriate ordering code as shown in the following example. To couple a 6" Steel pipe (6.63" OD) to a 6" C900 PVC pipe (6.90" OD), the ordering code is: 1519 6.70" x 7.10" product number

first end high limit of range

second end high limit of range

i.e. 1519 - 6.70 x 7.10 As above, but where a mechanically attached anode is to be used, the ordering code is: 1529 - 6.70 - 7.10

Note:

•

Coupling nuts are not Epoxy coated. We ensure continuity by removing the Epoxy coating from the underside of the bolt head and bolt head bearing surface of the end ring.

ROBAR INDUSTRIES LTD.

B.C.

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: January 1, 2000

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

1.7.1

1706 CAST DUCTILE IRON COUPLINGS STRAIGHT AND TRANSITION RAPID-FIT COUPLING

ROBAR ROBAR

IPF

SIZES AVAILABLE: 4" to 12" Nominal Pipe OD. APPLICATIONS: ROBAR 1706 Couplings are used to make a nonrestrained connection between two pipes of the same nominal size but with same or different OD's. Used in areas where corrosion is a factor, this coupling is fusion bonded epoxy to NSF-61 specifications and comes coated with Stainless Steel bolts and nuts.

MATERIAL SPECIFICATION: - COUPLING CONFORMS TO AWWA C219 - 91 Center Sleeve: Cast Ductile Iron (ASTM A536). End Rings: Cast Ductile Iron (ASTM A536). Gaskets: EPDM Grade E/WA (AWWA C111). Fasteners: 12mm T304 Stainless Steel (use 3/4” socket). Coating: Fusion Bonded Epoxy Coated to NSF-61 Specifications. OTHER CAST COUPLING CONFIGURATIONS: (See Product Information for each of the following) 1708:

Epoxy coated Center Sleeve and End Rings, Dacromet Coated Fasteners.

HOW TO ORDER: Determine the product number (1706 or 1708) and order the nominal size you require (see below), and then use the appropriate ordering code as shown in the following example. To couple (using Stainless Steel fasteners) an 8" Steel pipe (8.63" OD) to an 8" C900 PVC pipe (9.05" OD), the ordering code is: 1706 x 8" CAUTION COUPLING RANGES 2” 2½” 4” 6” 8” 10” 12”

NOTE:

= 2.32” - 2.87” = 2.83” - 3.35” = 4.25” - 5.04” = 6.26” - 7.17” = 8.58” - 9.25” = 10.67” - 11.38” = 12.68” - 13.39”

Lubricate Stainless Steel Bolts to prevent ‘galling’ of the Nuts

ROBAR INDUSTRIES LTD.

B.C. 1.52.1

These products do not restrain axial pipe movement

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

Effective: July 31, 2003

1708 CAST DUCTILE IRON COUPLINGS ROBAR ROBAR

IPF

STRAIGHT AND TRANSITION PID-FIT COUPLING

SIZES AVAILABLE: 4" to 12" Nominal Pipe OD. APPLICATIONS: ROBAR 1708 Couplings are used to make a nonrestrained connection between two pipes of the same nominal size but with same or different OD's. Used in areas where corrosion is not a factor, the coupling is fusion bonded epoxy coated to NSF-61 specs and comes with Dacromet coated bolts and nuts.

MATERIAL SPECIFICATION: - COUPLING CONFORMS TO AWWA C219 - 91 Center Sleeve: Cast Ductile Iron (ASTM A536). End Rings: Cast Ductile Iron (ASTM A536). Gaskets: EPDM Grade E/WA (AWWA C111) Fasteners: 12mm HSLA Steel Dacromet Coated (use ¾” socket). Coating: Fusion Bonded Epoxy Coated to NSF-61 Specifications. OTHER CAST COUPLING CONFIGURATIONS: (See Product Information for each of the following) 1706: Epoxy coated Center Sleeve and End Rings, Stainless Steel Fasteners. Lubricate stainless steel bolts to prevent ‘galling’ of the nuts. HOW TO ORDER: Determine the product number (1708 or 1706) and order the nominal size you require (see below), and then use the appropriate ordering code as shown in the following example. To couple (using Dacromet fasteners) a 6" Steel pipe (6.63" OD) to a 6" C900 PVC pipe (6.90" OD), the ordering code is: 1708 x 6"

COUPLING RANGES CAUTION 2” 2 ½” 4” 6” 8” 10” 12”

= 2.32” – 2.87” = 2.83” – 3.35” = 4.25” – 5.04” = 6.26” – 7.17” = 8.58” – 9.25” = 10.67” – 11.38” = 12.68” – 13.39” These products do not restrain axial pipe movement

ROBAR INDUSTRIES LTD.

B.C. 1.52.2

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894 Effective: July 31, 2003

1716 CAST DUCTILE IRON COUPLINGS STRAIGHT AND TRANSITION PLUS RAPID-FIT COUPLING

ROBAR ROBAR

IPF

SIZES AVAILABLE: 4", 6” and 8" Nominal Pipe OD. APPLICATIONS: ROBAR 1718 Couplings are used to make a nonrestrained connection between two pipes of the same nominal size but with same or different OD's. Used in areas where corrosion is a factor, the coupling is fusion bonded epoxy coated to NSF-61 specs and comes with Dacromet coated bolts and nuts.

MATERIAL SPECIFICATION: - COUPLING CONFORMS TO AWWA C219 - 91 Center Sleeve: Cast Ductile Iron (ASTM A536). End Rings: Cast Ductile Iron (ASTM A536). Gaskets: EPDM Grade E/WA (AWWA C111). Fasteners: 19mm Stainless Steel (use 15/16” socket). Coating: Fusion Bonded Epoxy Coated to NSF-61 Specifications. OTHER CAST COUPLING CONFIGURATIONS: (See Product Information for each of the following) 1718:

Epoxy coated Center Sleeve and End Rings, Dacromet coated Fasteners.

HOW TO ORDER: Determine the product number (1716 or 1718) and order the nominal size you require (see below), and then use the appropriate ordering code as shown in the following example. To couple (using Stainless Steel fasteners) a 6" Steel pipe (6.63" OD) to a 6" AC pipe (7.45" OD), the ordering code is: 1716 x 6" CAUTION COUPLING RANGES 4” 6” 8”

= 4.21” – 5.28” = 6.22” – 7.56” = 8.58” – 9.92” These products do not restrain axial pipe movement

NOTE:

Lubricate Stainless Steel Bolts to prevent ‘galling’ of the Nuts

ROBAR INDUSTRIES LTD.

B.C. 1.53.1

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

Effective: July 31, 2003

1718 CAST DUCTILE IRON COUPLINGS STRAIGHT AND TRANSITION PLUS RAPID-FIT COUPLING

ROBAR ROBAR

IPF

SIZES AVAILABLE: 4", 6” and 8" Nominal Pipe OD. APPLICATIONS: ROBAR 1718 Couplings are used to make a nonrestrained connection between two pipes of the same nominal size but with same or different OD's. Used in areas where corrosion is not a factor, the coupling is fusion bonded epoxy coated to NSF-61 specs and comes with Dacromet coated bolts and nuts.

MATERIAL SPECIFICATION: - COUPLING CONFORMS TO AWWA C219 - 91 Center Sleeve: Cast Ductile Iron (ASTM A536). End Rings: Cast Ductile Iron (ASTM A536). Gaskets: EPDM Grade E/WA (AWWA C111). Fasteners: 19mm Dacromet Coated Steel (use 15/16” socket). Coating: Fusion Bonded Epoxy Coated to NSF-61 Specifications. OTHER CAST COUPLING CONFIGURATIONS: (See Product Information for each of the following) 1716:

Epoxy coated Center Sleeve and End Rings, Stainless Steel Fasteners.

HOW TO ORDER: Determine the product number (1718 or 1716) and order the nominal size you require (see below), and then use the appropriate ordering code as shown in the following example. To couple (using Dacromet Coated Steel fasteners) a 4" Steel pipe (4.50" OD) to a 4" AC pipe (5.25" OD), the ordering code is: 1718 x 4"

CAUTION COUPLING RANGES 4” 6” 8”

= 4.21” – 5.28” = 6.22” – 7.56” = 8.58” – 9.92”

These products do not restrain axial pipe movement

ROBAR INDUSTRIES LTD.

B.C. 1.53.2

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

Effective: July 31, 2003

REDUCING COUPLINGS CAST DUCTILE IRON SELECTION TABLE

ROBAR

FIRST END RANGE END BY PIPE CODE X LOW OD HIGH*

NOM. PIPE SIZE

(Actual)

5.85 6.15 6.50 6.86 7.15

6 x 4

7.90 8.25 8.55 8.99 9.30 9.85 10.20 10.60 11.10 11.55 11.90 12.00 12.30 12.60 13.20 13.80 14.10 14.60 15.30 15.80 16.40

8 x 6

10 x 8

12 x 10

14 x 12

17.10 17.40 17.80 18.40 18.80 19.10 19.70

16 x 14 18 x 16

6.00 6.63 6.90

8.00 8.63 9.05 10.00 10.75 11.10

12.00 12.75 13.20 14.00

15.30 16.00

17.40 18.00

19.50 20.00

SECOND END MAX. RANGE PRESS. FASTENERS END PIPE NO. CODE (Working) LOW OD HIGH* LBS./IN.2 DIA. x LENGTH

SHIPPING SLEEVE WT.** LENGTH (IN.) (LBS.) (KG.)

(Actual)

6.15 6.45 6.70 7.10 7.35

F3 F3 D3 A1 E5

8.25 8.55 8.75 9.30 9.50 10.20 10.50 10.90 11.40 11.75 12.10 12.30 12.60 12.90 13.60 14.10 14.35 14.90 15.70 16.25 16.80

F3 F3 D3 A1 E5 F4 F4 D4 B2 A1 E5 F4 F4 D4 B2 A1 E5 F2 B2 A1 E5

17.40 17.80 18.20 18.80 19.20 19.70 20.25

F2 B2 A1 E5 B1 A2 E5

X

X

X

X

X

X

X

3.45 3.75 4.05 4.40 4.74 5.10 5.85 6.15 6.50 6.86 7.15 7.90 8.25 8.55 8.99 9.30 9.85 10.20 10.60 11.10 11.55 11.90 12.00 12.30 12.60 13.20 13.80 14.10 14.60 15.30 15.80 16.40 17.10 17.40 17.80 18.40

4.00 4.50 4.80 6.00 6.63 6.90 8.00 8.63 9.05

10.00 10.75 11.10

12.00 12.75 13.20 14.00

15.30 16.00

17.40 18.00

3.60 4.05 4.35 4.60 5.10 5.30 6.15 6.45 6.70 7.10 7.35 8.25 8.55 8.75 9.30 9.50

4T F3 F3 D3 A1 E5 F3 F3 D3 A1 E5 F3 F3 D3 A1 E5

10.20 10.50 10.90 11.40 11.75 12.10 12.30 12.60 12.90 13.60 14.10 14.35 14.90 15.70 16.25 16.80 17.40 17.80 18.20 18.80

F4 F4 D4 B2 A1 E5 F4 F4 D4 B2 A1 E5 F2 B2 A1 E5 F2 B2 A1 E5

175

5 5/8 x 8

5

25

11.4

175

6 5/8 x 8

5

34

15.5

175

7 5/8 x 10.5

7

51

23.2

175

8 5/8 x 10.5

7

83

37.7

175

9 5/8 x 10.5

7

111

50.5

175

10 5/8 x 10.5

7

124

56.4

150

12 5/8 x 10.5

7

132

60.0

All dimensions are in inches

Continued...

Note:

* **

The high limit of the range is used in the ordering code. Shipping weights are approximate and vary according to configuration.

ROBAR INDUSTRIES LTD.

B.C.

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: January 1, 2000

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

1.10.2

REDUCING COUPLINGS CAST DUCTILE IRON SELECTION TABLE

ROBAR

NOM. PIPE SIZE

FIRST END RANGE END BY PIPE CODE X LOW OD HIGH* (Actual)

20 x 16

20.80 21.35 21.75

20 x 18 22 x 16

20.80 21.35 21.75 22.95 23.45 23.75

22 x 18 22 x 20 24 x 22

22.95 23.45 23.75 22.95 23.45 23.75 25.70 26.10

21.60 22.00

21.60 22.00

24.00

24.00

24.00 25.80

SECOND END MAX. RANGE END PRESS. FASTENERS PIPE CODE (Working) NO. LOW OD HIGH* LBS./IN.2 DIA. x LENGTH

SHIPPING SLEEVE WT.** LENGTH (IN.) (LBS.) (KG.)

(Actual)

21.35 21.75 22.25

B1 A2 E5

21.35 21.75 22.25 23.35 23.85 24.25

B1 A2 E5 B1 A2 E5

23.35 23.85 24.25 23.35 23.85 24.25 26.00 26.32

B1 A2 E5 B1 A2 E5 A2 E5

X

X

X

X

X

X

17.10 17.40 17.80 18.40 18.80 19.10 19.70 17.10 17.40 17.80 18.40 18.80 19.10 19.70 20.80 21.35 21.75 22.95 23.45 23.75

17.40 18.00

19.50 20.00 17.40 18.00

19.50 20.00 21.60 22.00

24.00

17.40 17.80 18.20 18.80 19.20 19.70 20.25 17.40 17.80 18.20 18.80 19.20 19.70 20.25 21.35 21.75 22.25 23.35 23.85 24.25

F2 B2 A1 E5 B1 A2 E5 F2 B2 A1 E5 B1 A2 E5 B1 A2 E5 B1 A2 E5

150

150

150

12 5/8 x 10.5 12 5/8 x 10.5

13 5/8 x 10.5

7

161

73.2

7

156

70.9

7

272

123.6

150

13 5/8 x 10.5

7

268

121.8

150

13 5/8 x 10.5

7

275

125.0

150

14 5/8 x 14.0

8.5

300

136.4

All dimensions are in inches

CAST COUPLING CONFIGURATIONS: 1406R: Enamel coated Center Sleeve and End Rings, Stainless Steel Fasteners. 1408R: Enamel coated Center Sleeve and End Rings, HSLA Fasteners. 1506R: Epoxy coated Center Sleeve and End Rings, Stainless Steel Fasteners. 1507R: Similar to 1509R but complete with Anodes. 1509R: Epoxy coated Center Sleeve and End Rings, Epoxy Coated HSLA Steel bolts. 1519R: Similar to 1509R but designed for cathodically protected applications. HOW TO ORDER: Determine the product number (1408R, etc.) and the high limit of range for each end of the coupling (see page 1.10.2, 1.10.3), and then use the appropriate ordering code as shown in the following example. To couple a 8" Ductile Iron Pipe (9.05" OD) to a 6" C900 PVC pipe (6.90" OD), the ordering code is: 1408R 9.30" x 7.10" product number

first end high limit of range

second end high limit of range

i.e. 1408R - 9.30 x 7.10

Note:

* **

The high limit of the range is used in the ordering code. Shipping weights are approximate and vary according to configuration.

ROBAR INDUSTRIES LTD.

B.C.

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: January 1, 2000

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

1.10.3

1408R REDUCING COUPLINGS CAST DUCTILE IRON PRODUCT INFORMATION

ROBAR

SIZES AVAILABLE: 4" to 24" Nominal Pipe OD. APPLICATIONS: ROBAR 1408R Reducing Couplings are used to make a non-restrained connection between two pipes of different nominal sizes.

MATERIAL SPECIFICATION: - COUPLING CONFORMS TO AWWA C219 - 91 Center Sleeve: Cast Ductile Iron (ASTM A536). End Rings: Cast Ductile Iron (ASTM A536). Gaskets: SBR (Buna S) Rubber (AWWA C111). Other compounds available. Fasteners: 5/8" NC HSLA Steel, (AWWA C111). Coating: Two coats of Enamel. OTHER CAST COUPLING CONFIGURATIONS: (See Product Information for each of the following) 1406R: Enamel coated Center Sleeve and End Rings, Stainless Steel Fasteners. 1506R: Epoxy coated Center Sleeve and End Rings, Stainless Steel Fasteners. 1507R: Similar to 1509R but complete with Anodes. 1509R: Epoxy coated Center Sleeve and End Rings, Epoxy coated HSLA Steel bolts. 1519R: Similar to 1509R but designed for cathodically protected applications. HOW TO ORDER: Determine the product number (1408R, etc.) and the high limit of range for each end of the coupling (see page 1.10.2, 1.10.3), and then use the appropriate ordering code as shown in the following example. To couple an 8" Ductile Iron Pipe (9.05" OD) to a 6" C900 PVC Pipe (6.90" OD), the ordering code is: 1408R 9.30" x 7.10" product number

first end high limit of range

second end high limit of range

i.e. 1408R - 9.30 x 7.10

Note: Does not provide against pipe pullout.

ROBAR INDUSTRIES LTD. B.C.

Phone

(604) 591-8811

LES PRODUITS INDUSTRIELS ROBAR INC. QUEBEC

Phone

1-800-663-6553 Fax

1.12.0

(604) 591-5288

(450) 641-9525

1-800-315-9525 Fax

(450) 641-4894 Effective: January 1, 2000

1406R REDUCING COUPLINGS CAST DUCTILE IRON PRODUCT INFORMATION

ROBAR

SIZES AVAILABLE: 4" to 24" Nominal Pipe OD. APPLICATIONS: ROBAR 1406R Reducing Couplings are used to make a non-restrained connection between two pipes of different nominal sizes. Where bolt corrosion is a factor, the 1406R is supplied with Stainless Steel fasteners.

MATERIAL SPECIFICATION: - COUPLING CONFORMS TO AWWA C219 - 91 Center Sleeve: Cast Ductile Iron (ASTM A536). End Rings: Cast Ductile Iron (ASTM A536). Gaskets: SBR (Buna S) Rubber (AWWA C111). Other compounds available. Fasteners: 5/8" NC T304 Stainless Steel (ASTM A743) Coating: Two coats of Enamel. OTHER CAST COUPLING CONFIGURATIONS: (See Product Information for each of the following) 1408R: Enamel coated Center Sleeve and End Rings, HSLA Steel Fasteners. 1506R: Epoxy coated Center Sleeve and End Rings, Stainless Steel Fasteners. 1507R: Similar to 1509R but complete with Anodes. 1509R: Epoxy coated Center Sleeve and End Rings, Epoxy coated HSLA Steel bolts. 1519R: Similar to 1509R but designed for cathodically protected applications. HOW TO ORDER: Determine the product number (1406R, etc.) and the high limit of range for each end of the coupling (see page 1.10.2, 1.10.3), and then use the appropriate ordering code as shown in the following example. To couple an 8" Ductile Iron Pipe (9.05" OD) to a 6" C900 PVC Pipe (6.90" OD), the ordering code is: 1406R 9.30" x 7.10" product numbter

first end high limit of range

second end high limit of range

i.e. 1406R - 9.30 x 7.10 Note: Does not provide against pipe pullout.

ROBAR INDUSTRIES LTD. B.C.

Phone

(604) 591-8811

LES PRODUITS INDUSTRIELS ROBAR INC. QUEBEC

Phone

1-800-663-6553 Fax Effective: January 1, 2000

(604) 591-5288

(450) 641-9525

1-800-315-9525 Fax

(450) 641-4894

1.13.1

1506R REDUCING COUPLINGS CAST DUCTILE IRON PRODUCT INFORMATION

ROBAR

SIZES AVAILABLE: 4" to 24" Nominal Pipe OD. APPLICATIONS: ROBAR 1506R Reducing Couplings are used to make a non-restrained connection between two pipes of different nominal sizes. Used in areas where corrosion is a factor, the 1506R body is Epoxy coated and Stainless Steel fasteners are supplied.

MATERIAL SPECIFICATION: - COUPLING CONFORMS TO AWWA C219 - 91 Center Sleeve: Cast Ductile Iron (ASTM A536). End Rings: Cast Ductile Iron (ASTM A536). Gaskets: SBR (Buna S) Rubber (AWWA C111). Other compounds available. Fasteners: 5/8" NC T304 Stainless Steel (ASTM A743) Coating: Corrosion Protective Epoxy coating (AWWA C213-79). OTHER CAST COUPLING CONFIGURATIONS: (See Product Information for each of the following) 1406R: Enamel coated Center Sleeve and End Rings, Stainless Steel Fasteners. 1408R: Enamel coated Center Sleeve and End Rings, HSLA Steel Fasteners. 1507R: Similar to 1509R but complete with Anodes. 1509R: Epoxy coated Center Sleeve and End Rings, Epoxy coated HSLA Steel bolts. 1519R: Similar to 1509R but designed for cathodically protected applications. HOW TO ORDER: Determine the product number (1506R, etc.) and the high limit of range for each end of the coupling (see page 1.10.2, 1.10.3), and then use the appropriate ordering code as shown in the following example. To couple an 8" Ductile Iron pipe (9.05" OD) to a 6" C900 PVC pipe (6.90" OD), the ordering code is: 1506R 9.30" x 7.10" product number

first end high limit of range

second end high limit of range

i.e. 1506R - 9.30 x 7.10 Note:

Does not provide against pipe pullout.

ROBAR INDUSTRIES LTD. B.C.

Phone

(604) 591-8811

LES PRODUITS INDUSTRIELS ROBAR INC. QUEBEC

Phone

1-800-663-6553 Fax

1.14.0

(604) 591-5288

(450) 641-9525

1-800-315-9525 Fax

(450) 641-4894 Effective: January 1, 2000

1507R REDUCING COUPLINGS CAST DUCTILE IRON WITH ANODES PRODUCT INFORMATION

ROBAR

SIZES AVAILABLE: 4" to 24" Nominal Pipe OD. APPLICATIONS: ROBAR 1507R Reducing Couplings are used to make a connection between two pipes of different nominal sizes. Used in areas where corrosion is a factor, the 1507R body and fasteners are Epoxy coated. Zinc anodes are supplied with this coupling.

MATERIAL SPECIFICATION: - COUPLING CONFORMS TO AWWA C219 - 91 Center Sleeve: Cast Ductile Iron (ASTM A536). End Rings: Cast Ductile Iron (ASTM A536). Gaskets: SBR (Buna S) Rubber (AWWA C111). Other compounds available. Fasteners: 5/8" NC HSLA Steel, Epoxy coated bolts (AWWA C111). Coating: Corrosion Protective Epoxy coating (AWWA C213-79). Anodes: Zinc (ASTM B418 Type II) 300 grams minimum. OTHER CAST COUPLING CONFIGURATIONS: (See Product Information for each of the following) 1406R: Enamel coated Center Sleeve and End Rings, Stainless Steel Fasteners. 1408R: Enamel coated Center Sleeve and End Rings, HSLA Steel Fasteners. 1506R: Epoxy coated Center Sleeve and End Rings, Stainless Steel Fasteners. 1509R: Epoxy coated Center Sleeve and End Rings, Epoxy coated HSLA steel bolts. 1519R: Similar to 1509R but designed for cathodically protected applications. HOW TO ORDER: Determine the product number (1507R, etc.) and the high limit of range for each end of the coupling (see page 1.10.2, 1.10.3), and then use the appropriate ordering code as shown in the following example. To couple an 8" Ductile Iron Pipe (9.05" OD) to a 6" C900 PVC Pipe (6.90" OD), the ordering code is: 1507R 9.30" x 7.10" product number

Note:

• •

first end high limit of range

second end high limit of range

i.e. 1507R - 9.30 x 7.10 Coupling nuts are not Epoxy coated. We ensure continuity by removing the Epoxy coating from the underside of the bolt head and bolt head bearing surface of the end ring. Does not provide against pipe pullout.

ROBAR INDUSTRIES LTD. B.C.

Phone

(604) 591-8811

LES PRODUITS INDUSTRIELS ROBAR INC. QUEBEC

Phone

1-800-663-6553 Fax Effective: January 1, 2000

(604) 591-5288

(450) 641-9525

1-800-315-9525 Fax

(450) 641-4894

1.15.1

1509R REDUCING COUPLINGS CAST DUCTILE IRON PRODUCT INFORMATION

ROBAR

SIZES AVAILABLE: 4" to 24" Nominal Pipe OD. APPLICATIONS: ROBAR 1509R Reducing Couplings are used to make a non-restrained connection between two pipes of different nominal sizes. Used in areas where corrosion is a factor the 1509R body and fasteners are Epoxy coated.

MATERIAL SPECIFICATION: - COUPLING CONFORMS TO AWWA C219 - 91 Center Sleeve: Cast Ductile Iron (ASTM A536). End Rings: Cast Ductile Iron (ASTM A536). Gaskets: SBR (Buna S) Rubber (AWWA C111). Other compounds available. Fasteners: 5/8" NC HSLA Steel, Epoxy coated bolts (AWWA C111). Coating: Corrosion Protective Epoxy coating (AWWA C213-79). OTHER CAST COUPLING CONFIGURATIONS: (See Product Information for each of the following) 1406R: Enamel coated Center Sleeve and End Rings, Stainless Steel Fasteners. 1408R: Enamel coated Center Sleeve and End Rings, HSLA Steel Fasteners. 1507R: Similar to 1509R but complete with Anodes. 1506R: Epoxy coated Center Sleeve and End Rings, Stainless Steel Fasteners. 1519R: Similar to 1509R but designed for cathodically protected applications. HOW TO ORDER: Determine the product number (1509R, etc.) and high limit of range for each end of the coupling (see page 1.10.2, 1.10.3), and then use the appropriate ordering code as shown in the following example. To couple an 8" Ductile Iron Pipe (9.05" OD) to a 6" C900 PVC Pipe (6.90" OD), the ordering code is: 1509R 9.30" x 7.10" product number

first end high limit of range

second end high limit of range

i.e. 1509R - 9.30 x 7.10

Note: Does not provide against pipe pullout.

ROBAR INDUSTRIES LTD. B.C.

Phone

(604) 591-8811

LES PRODUITS INDUSTRIELS ROBAR INC. QUEBEC

Phone

1-800-663-6553 Fax

1.16.0

(604) 591-5288

(450) 641-9525

1-800-315-9525 Fax

(450) 641-4894 Effective: January 1, 2000

1519R REDUCING COUPLINGS CATHODICALLY FITTED CAST DUCTILE IRON PRODUCT INFORMATION

ROBAR

SIZES AVAILABLE: 2" to 24" Nominal Pipe OD. APPLICATIONS: ROBAR 1519R Reducing Couplings are used to make a non-restrained connection between two pipes of different nominal sizes. They are specially designed (cathodically fitted) to allow for electrical continuity throughout the entire fitting. Sacrificial anodes* are recommended to protect the coupling assembly as long as "continuity" is maintained between the coupling components. To ensure "isolation" between metal pipes, the use of ROBAR 1180 Isolation Boots is recommended. (See "ROBAR 1180 Isolation Boot" product information sheet, page 1.1.1). Isolation Boots are available in Straight, Transition or Reducing styles. * Anodes not supplied. MATERIAL SPECIFICATION: - COUPLING CONFORMS TO AWWA C219 - 91 Center Sleeve: Cast Ductile Iron (ASTM A536). End Rings: Cast Ductile Iron (ASTM A536). Gaskets: SBR (Buna S) Rubber (AWWA C111). Other compounds available. Fasteners: 5/8" NC HSLA Steel, Epoxy coated bolts (AWWA C111) 3/8" NC T304 set screws, zinc plated steel (AISI 40). Coating: Corrosion Protective Epoxy coating (AWWA C213-79). OTHER CAST COUPLING CONFIGURATIONS: (See Product Information for the following) 1529R: Designed for cathodically protected applications using mechanically attached anodes (Formerly designated as 1519E). HOW TO ORDER: Determine the product number (1519R, etc.) and the high limit of range for each end of the coupling (see page 1.10.2, 1.10.3), and then use the appropriate ordering code as shown in the following example. To couple a 6" C900 PVC pipe (6.90" OD) to a 4" Steel pipe (4.50" OD), the ordering code is: 1519R 7.10" x 4.60" product number

first end high limit of range

second end high limit of range

i.e. 1519R - 7.10 x 4.60 As above, but where a mechanically attached anode (cadweld) is to be used, the ordering code is: 1529R - 7.10 - 4.60 Note: • Coupling nuts are not Epoxy coated. We ensure continuity by removing the Epoxy coating from the underside of the bolt head and bolt head bearing surface of the end ring. • Does not provide against pipe pullout.

ROBAR INDUSTRIES LTD. B.C.

Phone

(604) 591-8811

LES PRODUITS INDUSTRIELS ROBAR INC. QUEBEC

Phone

1-800-663-6553 Fax Effective: January 1, 2000

(604) 591-5288

(450) 641-9525

1-800-315-9525 Fax

(450) 641-4894

1.17.1

1120 SPECIAL COUPLING GASKETS SPECIAL DIAMETERS PRODUCT INFORMATION

ROBAR

F-SERIES SIZES AVAILABLE: 4" to 14" Nominal Pipe OD. APPLICATIONS: ROBAR 1120 Special gaskets are used in conjunction with ROBAR couplings to accommodate transitions to special diameter pipe.

MATERIAL SPECIFICATION: Gasket: SBR (Buna S) Rubber (AWWA C111). Other compounds available. HOW TO ORDER: Determine the product number (1120), the high limit of range for the gasket required (see table below) and use the appropriate ordering code as shown in the following example. For a gasket with a range of 5.85" to 6.15" the ordering code is: 1120 6.15" product number

high limit of range

i.e. 1120 - 6.15 NOMINAL WORKING PIPE RANGE SIZE LOW HIGH* 4.05 4 3.75 4.35 4.05 6.15 6 5.85 6.45 6.15 8.25 8 7.90 8.55 8.25 10 9.85 10.20 10.20 10.50 12 12.00 12.30 12.30 12.60 14 14.60 14.90

Note:

* **

The high limit of the range is used in the ordering code. The selected F- Series gasket is used with the corresponding center sleeve and end ring.

ROBAR INDUSTRIES LTD.

B.C.

USE ** CENTER END SLEEVE RING 4" 4-3 STANDARD 6" 6-3 STANDARD 8" 8-3 STANDARD 10" 10-4 STEEL SIZE 12" 12-4 STEEL SIZE 14" 14-2 STANDARD All dimensions are in inches

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: January 1, 2000

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

1.20.0

1120 SPECIAL COUPLING GASKETS SPECIAL DIAMETERS PRODUCT INFORMATION

ROBAR

T-SERIES SIZES AVAILABLE: 3” to 12" Nominal Pipe OD. APPLICATIONS: ROBAR 1120 Special gaskets are used in conjunction with ROBAR couplings and FCAs to accommodate transitions to special diameter pipe.

MATERIAL SPECIFICATION: Gasket: SBR (Buna S) Rubber (AWWA C111). Other compounds available. HOW TO ORDER: Determine the product number (1120), the high limit of range for the gasket required (see table below) and use the appropriate ordering code as shown in the following example. For a gasket with a range of 5.65" to 5.95" the ordering code is: 1120 5.95" product number

high limit of range

i.e. 1120 - 5.95 NOMINAL WORKING PIPE RANGE SIZE LOW HIGH* 3.60 3 3.45

USE ** CENTER END SLEEVE RING 4 Std. 4T

5.95

6 Std.

6T

10

10.60 10.90

10 Std.

10T

12

12.60 12.90

12 Std.

12T

6

5.65

All dimensions are in inches

Note:

* The high limit of the range is used in the ordering code. ** The selected T- Series gasket is used with the corresponding center sleeve and end ring.

ROBAR INDUSTRIES LTD.

B.C.

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: January 1, 2000

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

1.20.1

1180 ISOLATING BOOTS RUBBER PRODUCT INFORMATION

ROBAR

STANDARD SIZES: 4" to 24" Nominal Pipe OD. Larger sizes are available upon request. APPLICATIONS: ROBAR 1180 Isolating Boots are used in conjunction with ROBAR couplings to separate pipe ends in cathodically protected systems.

MATERIAL SPECIFICATION: Boot: SBR (Buna S) Rubber compounded for water service and high dielectric value. (ASTM D2000-80 AA 615). Not available in other compounds. HOW TO ORDER: Determine the product number (1180) and actual OD of the pipe to be isolated and then use the appropriate ordering code as shown in the following example. For a 6" Ductile Iron Pipe (6.90" OD), the ordering code is: 1180 6.90" product number

actual pipe OD

i.e. 1180 - 6.90

ROBAR INDUSTRIES LTD.

B.C.

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: January 1, 2000

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

1.21.1

1410 & 1510 COUPLING END CAPS CAST DUCTILE IRON PRODUCT INFORMATION

ROBAR

SERIES 1400 & 1500 SIZES AVAILABLE: 4" to 12" Nominal Pipe OD. APPLICATIONS: ROBAR 1410 & 1510 End Caps are used in conjunction with a standard ROBAR Coupling (ordered separately) for the purpose of: • Temporary stops for mains to be extended in future. • Blind ending sections of main for testing. The 2" IP outlet allows for: • A ‘take off’ of 2" (or less) from the main. • Air relief or overflow - top mount. • Blow off or drainage - bottom mount. • Chlorinating of lines. MATERIAL SPECIFICATION: Cap: Cast Ductile Iron (ASTM A536). Plug: Cast Iron - 2" IP square head. Coating: 1410: Two coats of Enamel. 1510: Corrosion Protective Epoxy coated (AWWA C213-79). HOW TO ORDER: Determine the product number (1410 or 1510), nominal pipe size (see table below), and then use the appropriate ordering code as shown in the following example. For an enamel coated 8" End Cap, the ordering code is: 1410 8" product number

nom. pipe size

i.e. 1410 - 8 NOMINAL PIPE SIZE 4 6 8 10 12

Note:

*

CAP OD 5.10 7.10 9.30 11.40 13.60

OUTLET APPROXIMATE PLUG SHIPPING WEIGHT QUANTITY (LBS.) (KG.) 1 3.0 1.36 1 5.0 0.26 1 6.8 3.06 2 15.0 6.80 2 23.8 10.77 All dimensions are in inches

End capped couplings must be suitably blocked or restrained to resist hydraulic end thrust.

ROBAR INDUSTRIES LTD.

B.C.

END ASSEMBLY 4A1 6A1 8A1 10B2 12B2

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: January 1, 2000

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

1.22.0

1606 COUPLINGS FABRICATED STAINLESS STEEL PRODUCT INFORMATION

ROBAR

STANDARD SIZES: 4" to 24" Nominal Pipe OD. Larger Couplings (up to 60" OD) are available upon request. APPLICATIONS: ROBAR 1606 Couplings are used to make a nonrestrained connection between pipes of the same outside diameter. This Coupling is fabricated with a range of .30" (pipe OD ± .15") and therefore is best suited for smooth pipe with a uniform outside diameter (eg. Steel, PVC, Ductile Iron and HDPE).

MATERIAL SPECIFICATION: Body: T304 Stainless Steel, also available in T316 Stainless steel. Gaskets: SBR (Buna S) Rubber (ASTM D2000). Other compounds available. Fasteners: 5/8" NC T304 Stainless Steel - fully ivated*. HOW TO ORDER: Determine the product number (1606), number of sections, actual pipe OD, coupling width (see page 1.50.2), and then order by using appropriate ordering code as shown in the following example. If a two section (Style 2) coupling is required with a 12" body length, for a 10" Steel pipe (10.75" OD), the ordering code is: 1606 2 10.75" x 12" product number

number of sections

actual pipe OD

coupling width

i.e. 1606 - 2 - 10.75 x 12

Note:

*

"ivated" refers to chemical treatment after welding to return stainless steel to its original high corrosion resistance and appearance.

ROBAR INDUSTRIES LTD.

B.C.

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: January 1, 2000

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

1.50.1

1606 COUPLINGS FABRICATED STAINLESS STEEL PRODUCT INFORMATION

ROBAR

NOMINAL PIPE SIZE

MAXIMUM PRESSURE (Working) LBS./IN.2

4 6 8 10 12 14 16 18 20 22 24

150 150 150 150 150 125 100 100 100 100 100

Note:

• • • • •

STYLE 1 6" SHELL 6 lbs. 6 lbs. 7 lbs.

APPROXIMATE SHIPPING WEIGHT (LBS.) STYLE STYLE STYLE STYLE 1 2 3 3 12" SHELL 12" SHELL 12" SHELL 18" SHELL 11 lbs. 12 lbs. 13 lbs. 14 lbs. 16 lbs. 18 lbs.

16 lbs. 17 lbs. 18 lbs. 19 lbs. 24 lbs. 25 lbs. 34 lbs. 35 lbs. 37 lbs. 39 lbs. 41 lbs.

46 lbs. 68 lbs. 46 lbs. 69 lbs. 48 lbs. 72 lbs. 50 lbs. 78 lbs. 52 lbs. 84 lbs. All dimensions are in inches

Other sizes and pressure ratings are available. Please ROBAR's Technical Sales Department for additional information. Bolt Torque limit for all sizes is 80 ft./lbs. Maximum working pressures are achieved with smooth OD pipes and with careful installation. Rough pipe surfaces and careless installation will reduce attainable pressures. ROBAR 9626 Adjustable Stainless Steel Inserts are recommended for use on Polyethylene Pipe. 4.80" is the minimum OD 1606 Couplings can be sized to fit.

ROBAR INDUSTRIES LTD.

B.C.

STYLE 3 24" SHELL

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: January 1, 2000

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

1.50.2

1808 COUPLINGS FABRICATED STEEL PRODUCT INFORMATION

ROBAR

ROBAR

SERIES 200

BAKER

STANDARD SIZES: 4" to 96" Nominal Pipe OD. upon request.

Larger sizes available

APPLICATIONS: Fabricated 1808 Non-Restraining Couplings are used to flexibly couple larger diameter Steel and Cast Iron pipe lines. Accommodates 3/8" expansion-contraction per t, and deflection up to 4°, depending on size and length of Center Sleeve.

MATERIAL SPECIFICATION: - COUPLING CONFORMS TO AWWA C219 - 91 Center Sleeve: Mild Steel (AISI C-1012) up to 7" width, ASTM A-36 for 10" and wider Center Sleeve. Gaskets: SBR (Buna S) Rubber (AWWA C111). Other compounds available. Fasteners: 5/8" NC HSLA Steel, (AWWA C111). Coating: Two coats of Enamel. OTHER CONFIGURATIONS: 1806: Enamel coated Center Sleeve and End Rings, Stainless Steel fasteners. 1906: Epoxy coated Center Sleeve and End Rings, Stainless Steel fasteners. 1909: Epoxy coated Center Sleeve, End Rings and fasteners. SPECIAL APPLICATION: Center Sleeve: Other sizes available. Custom alloys are also available. Gaskets: Neoprene, SBR Rubber and other compounds available. Coatings: A wide variety of AWWA and other coatings available. Pipe Stops: Available, specify when ordering. Fasteners: Where Stainless Steel is requested, T304 is supplied. T316 also available. HOW TO ORDER: Determine product number (1808, etc.), center sleeve length, actual pipe OD, center sleeve thickness code and then order by using the appropriate product code (see page 1.61.2), as shown in the following example. To couple an 18" Steel pipe (18.00" OD) with a 10" long by 1/4" thick Center Sleeve, the ordering code is: 1808 10" 18.00" 2" product number

sleeve length

actual pipe OD

thickness (2 = 2/8 = 1/4" code 3 = 3/8" )

i.e. 1808 - 10 - 18.00 - 2

ROBAR INDUSTRIES LTD.

B.C.

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: January 1, 2000

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

1.61.1

1808 COUPLINGS FABRICATED STEEL PRODUCT INFORMATION

ROBAR

ROBAR

NOMINAL PIPE SIZE

14

16

18

20

22

24

SERIES 200

BAKER

ORDERING CODE*

OD PIPE

CENTER SLEEVE TxL

END RING OD

OVERALL LENGTH

FASTENERS NO. x DIA. x LENGTH

PN-7-1400-2 PN-10-1400-2 PN-7-1530-3 PN-10-1530-3 PN-7-1600-2 PN-10-1600-2 PN-7-1740-3 PN-10-1740-3 PN-7-1800-2 PN-10-1800-2 PN-7-1950-3 PN-10-1950-3 PN-7-2000-2 PN-1-2000-2 PN-7-2160-3 PN-10-2160-3 PN-7-2200-2 PN-10-2200-2 PN-7-2370-3 PN-10-2370-3 PN-7-2400-2 PN-10-2400-2 PN-7-2580-3 PN-10-2580-3

14.00 14.00 15.30 15.30 16.00 16.00 17.40 17.40 18.00 18.00 19.50 19.50 20.00 20.00 21.60 21.60 22.00 22.00 23.70 23.70 24.00 24.00 25.80 25.80

1/4 x 7 1/4 x 10 3/8 x 7 3/8 x 10 1/4 x 7 1/4 x 10 3/8 x 7 3/8 x 10 1/4 x 7 1/4 x 10 3/8 x 7 3/8 x 10 1/4 x 7 1/4 x 10 3/8 x 7 3/8 x 10 1/4 x 7 1/4 x 10 3/8 x 7 3/8 x 10 1/4 x 7 1/4 x 10 3/8 x 7 3/8 x 10

18 1/4 18 1/2 18 1/2 18 1/2 20 1/4 20 1/2 20 1/2 20 1/2 22 1/4 22 13/16 22 13/16 22 13/16 24 1/16 24 9/16 24 2/16 24 9/16 26 1/2 26 1/2 26 13/16 26 13/16 28 1/4 28 3/4 24 3/4 24 3/4

11 14 11 14 11 14 11 14 11 14 11 14 11 14 11 14 11 14 11 14 11 14 11 14

8 x 5/8 x 10 1/2 8 x 5/8 x 13 1/2 10 x 5/8 x 10 1/2 10 x 5/8 x 13 1/2 10 x 5/8 x 10 1/2 10 x 5/8 x 13 1/2 10 x 5/8 x 10 1/2 10 x 5/8 x 13 1/2 10 x 5/8 x 10 1/2 10 x 5/8 x 13 1/2 12 x 5/8 x 10 1/2 12 x 5/8 x 13 1/2 12 x 5/8 x 10 1/2 12 x 5/8 x 13 1/2 12 x 5/8 x 10 1/2 12 x 5/8 x 13 1/2 14 x 5/8 x 10 1/2 14 x 5/8 x 13 1/2 14 x 5/8 x 10 1/2 14 x 5/8 x 13 1/2 14 x 5/8 x 10 1/2 14 x 5/8 x 13 1/2 14 x 5/8 x 10 1/2 14 x 5/8 x 13 1/2

MAXIMUM APPROXIMATE PRESSURE SHIPPING WEIGHT (Working) (LBS.) (KG.) LBS./IN.2 510 64 29.1 510 77 35.0 750 76 34.6 750 93 42.3 440 74 33.6 440 88 40.0 665 87 39.6 665 107 48.6 400 81 36.8 400 97 44.1 590 96 43.6 590 118 53.6 360 90 40.9 360 108 49.1 535 107 48.6 535 132 60.0 330 98 44.6 330 117 53.2 490 115 52.3 490 143 65.0 305 107 48.6 305 128 58.2 450 127 57.7 450 156 70.9 All dimensions are in inches

Please ROBAR for sizes not listed.

Note:

* • • • •

PN is Product Number (1808, 1806, 1906 or 1909). Couplings listed are for common sizes. Couplings can be manufactured for any diameter. Larger diameters available. End Rings: Mild Steel (ANSI C-1012), End Rings are cold expanded a min. of 1% beyond the yield point. (Standard for all fabricated Mild Steel products).

ROBAR INDUSTRIES LTD.

B.C.

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: January 1, 2000

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

1.61.2

1838 TRANSITION COUPLINGS FABRICATED STEEL PRODUCT INFORMATION

ROBAR

SERIES 212 ROBAR

BAKER

STANDARD SIZES: 12" to 24" Nominal Pipe OD. Transition Couplings larger than 24" are available upon request. APPLICATIONS: Fabricated 1838 Transition Couplings are used to make a non-restraining connection between two different kinds of large diameter pipe of the same nominal size, such as Steel, Cast Iron or AsbestosCement pipes.

MATERIAL SPECIFICATION: - COUPLING CONFORMS TO AWWA C219 - 91 Center Sleeve: Mild Steel (ASTM A-7) plate of thickness in accordance with pressure requirements, etc. End Rings: Mild Steel (AISI C-1015) or Grade A Malleable or Ductile Iron. Gaskets: SBR (Buna S) Rubber (AWWA C111). Other compounds available. Fasteners: 5/8" NC HSLA Steel, Heavy Hex nuts (AWWA C111). Coating: Two coats of Enamel. OTHER CONFIGURATIONS: 1836: Enamel coated Center Sleeve and End Rings, Stainless Steel fasteners. 1936: Epoxy coated Center Sleeve and End Rings, Stainless Steel fasteners. 1939: Epoxy coated Center Sleeve, End Rings, and fasteners. HOW TO ORDER: Determine product number and center sleeve thickness (1838-2, etc.), and the actual pipe OD of the two pipes to be connected. Be sure that both pipe ODs are within pipe pricing range as listed (see page 1.62.2), and then order by using the appropriate ordering code as shown in the following example: To couple 16" Ductile Iron pipe (17.40" OD) to 16" (old) CI pipe (17.80" OD) with a 1/4" x 10" Center Sleeve where both sizes are within the (17.40 - 17.80) OD range, the ordering code is: 1838-2 17.40" x 17.80" product number

first end actual pipe OD

second end actual pipe OD

i.e. 1838 - 2 - 1740 x 1780 As above but with Fusion Epoxy (Lined and Coated) Center Sleeve, End Rings and with Stainless steel fasteners, the ordering code is: 1939 - 2 - 17.40 x 17.80 (L/C) FUSION

ROBAR INDUSTRIES LTD.

B.C.

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: January 1, 2000

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

1.62.1

1838 TRANSITION COUPLINGS FABRICATED STEEL PRODUCT INFORMATION

ROBAR

ROBAR

NOMINAL PIPE SIZE **12-14 **12-14 14 14 16 16 16 16 **16-18 **16-18 18 18 18 18 **18-20 **18-20 20

24

Note:

* ** *** • • • • •

SERIES 212

BAKER

PRICING* RANGE LOW HIGH 13.96 13.96 15.30 15.30 17.40 17.40 18.14 18.14 19.30 19.30 19.94 19.94 20.78 20.78 21.60 21.60 23.06 23.06 24.18 24.18 26.32 26.32 27.64 27.64 28.96 28.96

14.48 14.48 15.65 15.65 17.80 17.80 18.88 18.88 19.92 19.92 20.32 20.32 21.16 21.16 22.14 22.14 23.44 23.44 24.56 24.56 26.50 26.50 28.02 28.02 29.34 29.34

PRODUCT CODE***

CENTER SLEEVE TxL

END RING OD

OVERALL LENGTH

FASTENERS NO. x DIA. x LENGTH

PN-2 PN-3 PN-2 PN-3 PN-2 PN-3 PN-2 PN-3 PN-2 PN-3 PN-2 PN-3 PN-2 PN-3 PN-2 PN-3 PN-2 PN-3 PN-2 PN-3 PN-2 PN-3 PN-2 PN-3 PN-2 PN-3

1/4 x 10 3/8 x 10 1/4 x 10 3/8 x 10 1/4 x 10 3/8 x 10 1/4 x 10 3/8 x 10 1/4 x 10 3/8 x 10 1/4 x 10 3/8 x 10 1/4 x 10 3/8 x 10 1/4 x 10 3/8 x 10 1/4 x 10 3/8 x 10 1/4 x 10 3/8 x 10 1/4 x 10 3/8 x 10 1/4 x 10 3/8 x 10 1/4 x 10 3/8 x 10

19 1/4 19 1/2 20 20 22 22 23 23 24 24 24 1/2 24 1/2 25 1/2 25 1/2 26 1/2 26 1/2 28 28 29 29 31 31 33 33 33 1/2 24 1/2

14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14

8-5/8 x 14 8-5/8 x 14 10-5/8 x 14 10-5/8 x 14 10-5/8 x 14 10-5/8 x 14 10-5/8 x 14 10-5/8 x 14 12-5/8 x 14 12-5/8 x 14 12-5/8 x 14 12-5/8 x 14 12-5/8 x 14 12-5/8 x 14 12-5/8 x 14 12-5/8 x 14 12-5/8 x 14 12-5/8 x 14 14-5/8 x 14 14-5/8 x 14 14-5/8 x 14 14 5/8 x 14 16-5/8 x 14 16-5/8 x 14 16-5/8 x 14 16-5/8 x 14

This is not the coupling range. It is the minimum and maximum of popular sizes. OD's must be specified. PN is Product Number (1838, 1836, 1936 or 1939). Couplings listed are for common sizes. Transition Couplings larger than 24" are readily available. ROBAR for sizes not listed specifying Outside Diameters (OD) of pipes to be coupled. Transitions with 0.250" differential are accomplished with a transition "tail" gasket on the smaller end. Transitions above 0.250", and within the range covered on this sheet, are accomplished by expanding the Center Sleeve and End Rings to accommodate the pipe size OD. When ordering Epoxy coated products, specify Fusion Epoxy or Liquid Epoxy and whether the product is to be Lined (L), Coated (C) or both (L/C).

ROBAR INDUSTRIES LTD.

B.C.

MAXIMUM APPROXIMATE PRESSURE SHIPPING WEIGHT (Working) (LBS.) (KG.) LBS./IN. 2 510 65 29.6 750 80 36.4 510 79 35.9 750 91 41.4 440 90 40.9 665 104 47.3 440 96 43.6 665 110 50.0 440 101 45.9 665 116 52.7 400 99 45.0 590 115 52.3 400 104 47.3 590 120 54.6 360 108 49.1 535 125 56.8 310 116 52.7 490 134 60.9 310 121 55.0 450 140 63.6 275 131 59.6 380 151 68.6 275 138 62.7 380 160 72.7 275 143 65.0 380 166 75.5 All dimensions are in inches

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: January 1, 2000

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

1.62.2

1848 STEEL REDUCING COUPLINGS FABRICATED STEEL PRODUCT INFORMATION

ROBAR

ROBAR

SERIES 220

BAKER

STANDARD SIZES: Large end, 6" to 48" Nominal Pipe OD. Small end, 4" to 46" nominal pipe OD. Reducing Couplings larger than 48" pipe OD are available upon request. APPLICATIONS: Fabricated 1848 Non-Restraining Steel Reducing Couplings are used to flexibly couple two pipes of different nominal size.

MATERIAL SPECIFICATION: - COUPLING CONFORMS TO AWWA C219 - 91 Center Sleeve: Mild Steel (ASTM A-7) plate of thickness in accordance with pressure requirements, etc. End Rings: Mild Steel (AISI C-1015) or Grade A Malleable or Ductile Iron. Gaskets: SBR (Buna S) Rubber, (AWWA C111). Other compounds available. Fasteners: 5/8" NC HSLA Steel, (AWWA C111). Coating: Two coats of Enamel. OTHER CONFIGURATIONS: 1846: Enamel coated Center Sleeve and End Rings, Stainless Steel fasteners. 1946: Epoxy coated Center Sleeve and End Rings, Stainless Steel fasteners. 1949: Epoxy coated Center Sleeve, End Rings, and fasteners. HOW TO ORDER: Determine product number (1848, etc.), and the actual pipe OD of the two pipes to be connected. Be sure that both pipe Outside Diameters are within pipe pricing range as listed (reductions of more than three (3) nominal sizes requires special pricing. ROBAR ) and then order by using appropriate Ordering Code (see page 1.63.2) as shown in the following example: To couple a 16" Ductile Iron pipe (17.40" OD) to a 14" Steel pipe (14.00" OD), the ordering code is: 1848 17.40" x 14.00" product number

first end actual pipe OD

second end actual pipe OD

i.e. 1848 - 17.40 x 14.00 As above but with Fusion Epoxy (Coated) Center Sleeve, End Rings and Fasteners, the ordering code is: 1949 - 17.40 x 14.00 (C) FUSION

ROBAR INDUSTRIES LTD.

B.C.

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: January 1, 2000

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

1.63.1

1848 REDUCING COUPLINGS FABRICATED STEEL PRODUCT INFORMATION

ROBAR

SERIES 220 ROBAR

BAKER

NOMINAL PIPE SIZE 6 8 9 10 11 12 13 14 15 16 17 18 19 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48

LARGE END OF PIPE "L" PRICING NET. WT. RANGE LOW HIGH (LBS.) (KG.) 5.00 7.49 32 14.5 7.50 8.49 35 15.9 8.50 9.49 37 16.8 9.50 10.49 38 17.3 10.50 11.49 44 20.0 11.50 12.49 47 21.4 12.50 13.49 56 25.5 13.50 14.49 60 27.3 14.50 15.49 71 32.3 15.50 16.49 79 35.9 16.50 17.49 85 38.6 17.50 18.49 91 41.4 18.50 19.49 97 44.1 19.50 20.99 105 47.7 21.00 22.99 114 51.8 23.00 24.99 129 58.6 25.00 26.99 142 64.5 27.00 28.99 158 71.8 29.00 30.99 176 80.0 31.00 32.99 189 85.9 33.00 34.99 225 102.3 35.00 36.99 258 117.3 37.00 38.99 279 126.8 39.00 40.99 298 135.5 41.00 42.99 335 152.3 43.00 44.99 359 163.2 45.00 46.99 384 174.5 47.00 48.99 407 185.0

NOMINAL PIPE SIZE 4 5 6 7 8 9 10 11 12 13 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46

SMALL END OF PIPE "S" PRICING NET. WT. RANGE LOW HIGH (LBS.) (KG.) 3.50 4.49 13 5.9 4.50 5.49 16 7.3 5.50 6.49 20 9.1 6.50 7.49 20 9.1 7.50 8.49 21 9.5 8.50 9.49 23 10.5 9.50 10.49 24 10.9 10.50 11.49 25 11.4 11.50 12.49 27 12.3 12.50 13.49 32 14.5 13.50 14.99 31 14.1 15.00 16.99 34 15.5 17.00 18.99 33 15.0 19.00 20.99 33 15.0 21.00 22.99 33 15.0 23.00 24.99 31 14.1 25.00 26.99 29 13.2 27.00 28.99 27 12.3 29.00 30.99 23 10.5 31.00 32.99 19 8.6 33.00 34.99 14 6.4 35.00 36.99 23 10.5 37.00 38.99 17 7.7 39.00 40.99 11 5.0 41.00 42.99 3 1.4 43.00 44.99 3 1.4 45.00 46.99 13 5.9 All dimensions are in inches

HOW TO ORDER: (see page 1.63.1) To couple a 16" Ductile Iron pipe (17.40" OD) to a 14" Steel pipe (14.00" OD), the ordering code is: 1848 17.40" x 14.00" product number

first end actual pipe OD

second end actual pipe OD

i.e. 1848 - 17.40 x 14.00 To determine the approximate weight, add the Large End net weight to the Small End net weight:

Note:

• •

85 LBS. 31 LBS. 166 LBS.

38.6 KG. 14.1 KG. 52.7 KG.

Reducing Couplings larger than 48" are readily available. the plant for pricing on sizes not listed, specifying Outside Diameters of pipes to be coupled. When ordering Epoxy coated products, specify Fusion Epoxy or Liquid Epoxy and whether the product is to be Lined (L), Coated (C) or both (L/C).

ROBAR INDUSTRIES LTD.

B.C.

17" 14" -

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: January 1, 2000

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

1.63.2

1858 LONG SLEEVE COUPLINGS FABRICATED STEEL PRODUCT INFORMATION

ROBAR

ROBAR

SERIES 208

BAKER

STANDARD SIZES: 4" to 24" Nominal Pipe OD, Center Sleeve length from 10", 16" or 24". Sizes outside of those listed may be ordered by ing ROBAR . APPLICATIONS: Fabricated 1858 Long Body Couplings are used to pipes with widely separated ends.

MATERIAL SPECIFICATION: - COUPLING CONFORMS TO AWWA C219 - 91 Center Sleeve: Steel (AISI C-1012) up to 7" width, (ASTM A-36) for 10" and wider Center Sleeve. End Rings: Steel (AISI C-1021), special sections. Rings are cold expanded a min. of 1% beyond the yield point. Gaskets: SBR (Buna S) Rubber (AWWA C111). Other compounds available. Fasteners: 5/8" NC HSLA Steel, (AWWA C111). Coating: Two coats of Enamel. OTHER CONFIGURATIONS: 1856: Enamel coated Center Sleeve and End Rings, Stainless Steel fasteners. 1956: Epoxy coated Center Sleeve and End Rings, Stainless Steel fasteners. 1959: Epoxy coated Center Sleeve, End Rings, and HSLA fasteners. HOW TO ORDER: Determine the product number (1858, etc.), length of Center Sleeve, the actual pipe OD, and then order by using the appropriate product code (see page 1.64.2, 1.64.3) as shown in the following example: (Order the Center Sleeve length long enough to ensure room for deflection and for pipe expansion and contraction.) For a 16" OD Steel pipe with a distance of 17" between pipe ends, allowing 2 1/2" each end for coupling to seal, (total minimum required length of 22"), the ordering code is: 1858 24" 16.00" product number

center sleeve length

actual pipe OD

i.e. 1858 - 24 - 1600 As above example, but with Fusion Epoxy (Coated) Center Sleeve, End Rings and fasteners, the ordering code is: 1959 - 24 - 1600 (C) FUSION

ROBAR INDUSTRIES LTD.

B.C.

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: January 1, 2000

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

1.64.1

1858 LONG SLEEVE COUPLINGS FABRICATED STEEL PRODUCT INFORMATION

ROBAR

SERIES 208 ROBAR

BAKER

NOMINAL PIPE SIZE

4

4 1/2

6

8

10

12

ORDERING CODE*

OD PIPE

CENTER SLEEVE T x L**

END RING OD

OVERALL LENGTH

FASTENERS NO. x DIA. x LENGTH

PN-10-4.50 PN-16-4.50 PN-24-4.50 PN-10-5.00 PN-16-5.00 PN-24-5.00 PN-10-6.00 PN-16-6.00 PN-24-6.00 PN-10-6.63 PN-16-6.63 PN-24-6.63 PN-10-8.00 PN-16-8.00 PN-24-8.00 PN-10-8.63 PN-16-8.63 PN-24-8.63 PN-10-10.00 PN-16-10.00 PN-24-10.00 PN-10-10.75 PN-16-10.75 PN-24-10.75 PN-10-12.00 PN-16-12.00 PN-24-12.00 PN-10-12.75 PN-16-12.75 PN-24-12.75

4.50 4.40 4.50 5.00 5.00 5.00 6.00 6.00 6.00 6.63 6.63 6.63 8.00 8.00 8.00 8.63 8.63 8.63 10.00 10.00 10.00 10.75 10.75 10.75 12.00 12.00 12.00 12.75 12.75 12.75

.258 x 10 .258 x 16 .258 x 24 .280 x 10 .280 x 16 .280 x 24 .250 x 10 .250 x 16 .250 x 24 .250 x 10 .250 x 16 .250 x 24 .250 x 10 .250 x 16 .250 x 24 .250 x 10 .250 x 16 .250 x 24 .250 x 10 .250 x 16 .250 x 24 .250 x 10 .250 x 16 .250 x 24 .250 x 10 .250 x 16 .250 x 24 .250 x 10 .250 x 16 .250 x 24

7 1/4 7 1/4 7 1/4 9 1/2 9 1/2 9 1/2 10 1/2 10 1/2 10 1/2 10 10 10 12 1/2 12 1/2 12 1/2 12 1/4 12 1/4 12 1/4 13 1/2 13 1/ 2 13 1/2 14 1/4 14 1/4 14 1/4 15 1/2 15 1/2 15 1/2 16 1/4 16 1/4 16 1/4

12 18 26 12 1/2 18 1/2 26 1/2 12 1/2 18 1/2 26 1/2 12 1/2 18 1/2 26 1/2 12 1/2 18 1/2 26 1/2 12 1/2 18 1/2 26 1/2 12 1/2 18 1/2 26 1/2 12 1/2 18 1/2 26 1/2 12 1/2 19 1/2 27 1/2 12 1/2 19 1/2 27 1/2

4-5/8 x 12 1/2 4-5/8 x 18 1/2 4-5/8 x 26 1/2 4-5/8 x 12 1/2 4-5/8 x 18 1/2 4-5/8 x 26 1/2 5-5/8 x 12 1/2 5-5/8 x 18 1/2 5-5/8 x 26 1/2 5-5/8 x 12 1/2 5-5/8 x 18 1/2 5-5.8 x 26 1/2 6-5/8 x 12 1/2 6-5/8 x 18 1/2 6-5/8 x 26 1/2 6-5/8 x 12 1/2 6-5/8 x 18 1/2 6-5/8 x 26 1/2 6-5/8 x 12 1/2 6-5/8 x 18 1/2 6-5/8 x 26 1/2 7-5/8 x 12 1/2 7-5/8 x 18 1/2 7-5/8 x 26 1/2 7-5/8 x 12 1/2 7-5/8 x 18 1/2 7-5/8 x 26 1/2 8-5/8 x 12 1/2 8-5/8 x 18 1/2 8-5/8 x 26 1/2

MAXIMUM APPROXIMATE PRESSURE SHIPPING WEIGHT (Working) (LBS.) (KG.) LBS./IN2 1500 26 11.8 1500 33 15.0 1500 47 21.4 1250 30 13.6 1250 41 18.6 1250 52 23.6 1350 47 21.4 1350 52 23.6 1350 65 29.6 1200 32 14.6 1200 50 22.7 1200 66 30.0 1050 37 16.8 1050 68 30.9 1050 82 37.3 810 39 17.7 810 67 30.5 810 85 38.6 710 46 20.9 710 75 34.1 710 104 47.3 660 50 22.7 660 79 35.9 660 108 49.1 700 68 30.9 700 89 40.5 700 120 54.6 775 110 50.0 775 135 61.4 775 168 76.4 All dimensions are in inches

Continued...

Note:

* PN is the Product Number (1858, 1856, 1956 or 1959). ** ‘T’ is the thickness of the center sleeve. ‘L’ is the length of the center sleeve.

ROBAR INDUSTRIES LTD.

B.C.

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: January 1, 2000

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

1.64.2

1858 LONG SLEEVE COUPLINGS FABRICATED STEEL PRODUCT INFORMATION

ROBAR

ROBAR

NOMINAL PIPE SIZE

14

16

18

20

22

24

SERIES 208

BAKER

ORDERING CODE*

OD PIPE

CENTER SLEEVE T x L**

END RING OD

OVERALL LENGTH

FASTENERS NO. x DIA. x LENGTH

MAXIMUM PRESSURE (Working) LBS./IN.2

PN-10-14.00 PN-16-14.00 PN-24-14.00 PN-10-16.00 PN-16-16.00 PN-24-16.00 PN-10-18.00 PN-16-18.00 PN-24-18.00 PN-10-20.00 PN-16-20.00 PN-24-20.00 PN-10-22.00 PN-16-22.00 PN-24-22.00 PN-10-24.00 PN-16-24.00 PN-24-24.00

14 14 14 16 16 16 18 18 18 20 20 20 22 22 22 24 24 24

.250 x 10 .250 x 16 .250 x 24 .313 x 10 .313 x 16 .313 x 24 .313 x 10 .313 x 16 .313 x 24 .313 x 10 .313 x 16 .313 x 24 .313 x 10 .313 x 16 .313 x 24 .313 x 10 .313 x 16 .313 x 24

18 1/4 18 1/4 18 1/4 20 1/4 20 1/4 20 1/4 22 1/4 22 1/4 22 1/4 24 24 24 27 27 27 28 1/2 28 1/2 28 1/2

12 1/2 19 1/2 27 1/2 12 1/2 19 1/2 27 1/2 12 1/2 19 1/2 27 1/2 12 1/2 19 1/2 27 1/2 12 1/2 19 1/2 27 1/2 12 1/2 19 1/2 27 1/2

8-5/8 x 12 1/2 8-5/8 x 18 1/2 8-5/8 x 26 1/2 9-5/8 x 12 1/2 9-5/8 x 18 1/2 9-5/8 x 26 1/2 10-5/8 x 12 1/2 10-5/8 x 18 1/2 10-5/8 x 26 1/2 12-5/8 x 12 1/2 12-5/8 x 18 1/2 12-5/8 x 26 1/2 13-5/8 x 12 1/2 13-5/8 x 18 1/2 13-5/8 x 26 1/2 14-5/8 x 12 1/2 14-5/8 x 18 1/2 14-5/8 x 26 1/2

660 660 660 665 665 665 590 590 590 535 535 535 490 490 490 450 450 450

APPROXIMATE SHIPPING WEIGHT (LBS.) (KG.)

126 57.3 138 62.7 172 78.2 145 65.9 170 77.3 206 93.6 152 69.1 178 80.9 240 109.1 160 72.7 195 88.6 265 120.5 180 81.8 225 102.3 300 136.4 210 95.5 250 113.6 330 150.0 All dimensions are in inches

HOW TO ORDER: Determine the product number (1858, etc.), length of Center Sleeve, the actual pipe OD, and then order by using the appropriate product code (see page 1.64., 1.64.3) as shown in the following example: (Order the Center Sleeve length long enough to ensure room for deflection and for pipe expansion and contraction.) For a 16" OD Steel pipe with a distance of 17" between pipe ends, allowing 2 1/2" each end for coupling to seal, (total minimum required length of 22"), the ordering code is: 1858 24" 16.00" product number

center sleeve length

actual pipe OD

i.e. 1858 - 24 - 1600

Note:

* ** • • •

PN is the Product Number (1858, 1856, 1956 or 1959). ‘T’ is the thickness of the center sleeve. ‘L’ is the length of the center sleeve. Series 1858 Long Sleeve Couplings are available for all sizes of Cast Iron Pipes. Cold expanded min. of 1% beyond the yield point When ordering Epoxy coated products, specify Fusion Epoxy or Liquid Epoxy and whether the product is to be Lined (L), Coated (C) or both (L/C).

ROBAR INDUSTRIES LTD.

B.C.

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: January 1, 2000

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

1.64.3

SECTION 2 - CONTENTS SADDLES

ROBAR

SERVICE SADDLES 2408

Enamel coated, Low Alloy Steel Straps

2.1.1

2406

Enamel coated, T304 SS Straps

2.2.1

2506

Epoxy coated, T304 SS Straps

2.3.1

2606

Fabricated T304 SS Service Saddles

2.5.1

2616

Style 1

2.5.2

2626

Style 2

2.5.3

2636

Style 3

2.5.4

2706

Cast Bronze, T304 SS Straps

2.6.1

ISOLATING SADDLES 2786

Cast Bronze, T304 SS Straps

ROBAR INDUSTRIES LTD.

B.C.

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: January 1, 2000

2.8.0

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

2.0.1

2408 SERVICE SADDLES ROBAR

CAST DUCTILE IRON PRODUCT INFORMATION

SIZES AVAILABLE: 2" to 12" Nominal Pipe OD. • Outlets from 3/4" to 2" in AWWA taper (CC) or female Iron pipe (IP). • Available in Single strap (SS) and double strap (DS) styles. • Fits Steel (IPS), Cast Iron, Ductile Iron, and AC/RB pipe. • Consult factory for other outlet sizes.

2408 SS

2408 DS

APPLICATIONS: ROBAR 2408 Service Saddles are used to take a service outlet off a transmission or distribution line. The 2408 Service Saddle is recommended for use on Ductile Iron pipe and Steel pipe (Not recommended for C900). Other products also recommended for Ductile Iron pipe, Steel pipe as well as C900 pipe are 2506, 2606, and 2706 Service Saddles. See individual product sheets for

MATERIAL SPECIFICATION: Saddle Body: Ductile Iron body (ASTM A536). Gaskets: SBR (Buna S) Rubber, (AWWA C111). Other compounds available. Saddle Straps: 5/8" NC Low Alloy Steel (AWWA C111). Fasteners: 5/8" NC HSLA, (AWWA C111). Coating: Two coats of Enamel. OTHER CONFIGURATIONS: (See Product Information for each of the following) 2406: Enamel coated Cast Ductile body with T304 Stainless Steel straps. 2506: Epoxy coated Cast Ductile body with T304 Stainless Steel straps. HOW TO ORDER: Determine the product number ( 2408, 2406 or 2506), the high limit of range (see page 2.1.2), outlet size, outlet thread, and strap style, and then use the appropriate ordering code as shown in the following example: If a 6" Single strap (SS) Saddle with a 3/4" IP tap is required for a 6" Ductile Iron pipe (6.90" OD), the ordering code is: 2408 7.50" x 3/4" IP SS product number

high limit of range

outlet size

outlet thread

strap style

i.e. 2408 - 7.50 x 3/4 IP - SS If a 12" Double Strap (DS) Saddle with a 2" CC tap is required for a 12" Ductile Iron pipe (13.20" OD), the ordering code is: 2408 - 14.38 x 2" CC - DS

ROBAR INDUSTRIES LTD.

B.C.

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: January 1, 2000

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

2.1.1

2408 SERVICE SADDLES CAST DUCTILE IRON PRODUCT INFORMATION

ROBAR

2408 SS

2408 DS

Designed for tapping into Steel, Ductile Iron and Cast Iron pipe. Saddle straps and bodies are shaped to evenly and safely distribute the clamping load to the pipe. When tightened, they conform to the various diameters in each nominal size of pipe within specified working range. Refer to the ROBAR OD Chart (see page 0.9.1) for various pipe diameters.

WORKING NOMINAL RANGE PIPE SIZE LOW HIGH* 4

4.50

5.40

OUTLET SIZES AWWA (CC) OR IRON PIPE (IP) 3/4 - 2

STRAP STYLE SINGLE (SS)

DOUBLE (DS)

SS

8 10 12

6.62 8.62

7.50 9.62

10.75 12.12 12.75 14.38

3/4 - 2 3/4 - 2 3/4 - 2 3/4 - 2

(LBS.)

(KG.)

5.0

2.3

6.5

2.9

6.0

2.7

DS

8.5

3.9

6.5

2.9

DS

10.0

4.5

7.5

3.4

DS

11.5

5.2

11.5

5.2

12.5

5.7

DS 6

APPROXIMATE SHIPPING WEIGHT

SS SS SS SS DS

All dimensions are in inches

HOW TO ORDER: (See page 2.1.1)

Note:

* •

The high limit of the range is used in the ordering code. ROBAR 2500 Series Repair Pads are available in nominal sizes from 4" to 12" (see page 2.4.1).

ROBAR INDUSTRIES LTD.

B.C. 2.1.2

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894 Effective: January 1, 2000

2406 SERVICE SADDLES CAST DUCTILE IRON PRODUCT INFORMATION

ROBAR

SIZES AVAILABLE: 2" to 12" Nominal Pipe OD. • Outlets from 3/4" to 2" in AWWA taper (CC) or female Iron pipe (IP). • Available in Single strap (SS) or Double strap (DS) styles. • Fits Steel (IPS), Cast Iron and Ductile Iron pipe. • Consult factory for other outlet sizes. APPLICATIONS: ROBAR 2406 Service Saddles are used to take a service outlet off a transmission or distribution line. The 2406 Service Saddle is recommended for use on C900 Pipe because of the wide strap configuration. Other products also recommended are 2506, 2606, and 2706. See individual product sheets for more details.

2406 SS

2406 DS MATERIAL SPECIFICATION: Saddle Body: Cast Ductile Iron body (ASTM A536) Gaskets: SBR (Buna S) Rubber, (AWWA C111). Other compounds available. Saddle Straps: T304 Stainless Steel, fully ivated*. Fasteners: 1/2" NC T304 Stainless Steel. Coating: Two coats of Enamel. OTHER CONFIGURATIONS: (See Product Information for each of the following) 2408: Enamel coated Cast Ductile Iron with Low Alloy Steel Straps. 2506: Epoxy coated Cast Ductile Iron body with T304 Stainless Steel straps. HOW TO ORDER: Determine the product number (2406, 2408, or 2506), the high limit of range (see page 2.2.2), outlet size, outlet thread, and strap style, and then use the appropriate ordering code as shown in the following example. If a Single strap (SS) Saddle with a 3/4" CC tap is required for a 6" Ductile Iron pipe (6.90" OD). Refer to page 2.2.2 and then use the appropriate ordering code as shown in the following example: 2406 7.50" x 3/4" CC SS product number

high limit of range

outlet size

outlet thread

strap style

i.e. 2406 - 7.50 x 3/4 CC - SS If a Double Strap (DS) Saddle with a 2" IP tap is required for a 12" Ductile Iron pipe (13.20" OD), the ordering code is: 2406 - 14.38 x 2 IP - DS

Note:

*

"ivated" refers to chemically treating Stainless Steel after welding to return it to its original high corrosion resistance and appearance.

ROBAR INDUSTRIES LTD.

B.C.

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: January 1, 2000

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

2.2.1

2406 SERVICE SADDLES CAST DUCTILE IRON PRODUCT INFORMATION

ROBAR

2406 SS

2406 DS

Designed for tapping into Steel, Ductile Iron, Cast Iron and Asbestos Cement pipe. Saddle straps and bodies are shaped to evenly and safely distribute the clamping load to the pipe. When tightened, they conform to the various diameters in each nominal size of pipe within specified working range. Refer to the ROBAR OD Chart (see page 0.9.1) for various pipe diameters.

SADDLES COMPLETE WITH FLAT WASHERS NOMINAL PIPE SIZE

WORKING RANGE LOW HIGH*

OUTLET SIZES AWWA (CC) OR IRON PIPE (IP)

STRAP STYLE SINGLE (SS)

2 3

2.38 3.25

2.56 3.54

3/4 - 1 3/4 - 1

4

4.50

5.40

3/4 - 2

SS SS SS

6

6.62

7.50

3/4 - 2

SS

9.62

3/4 - 2

SS

10.75 12.12

3/4 - 2

SS

3/4 - 2

SS

DOUBLE (DS)

DS DS

8

8.62

DS 10

DS 12

12.75 14.38

DS

APPROXIMATE SHIPPING WEIGHT (LBS.)

(KG.)

2.0 2.5 5.0 6.5 6.0 8.5 6.5 10.0 7.5 11.5 11.5 12.5

0.9 1.1 2.3 2.9 2.7 3.9 2.9 4.5 3.4 5.2 5.2 5.7

All dimensions are in inches

HOW TO ORDER: (See page 2.2.1)

Note:

* •

The high limit of the range is used in the ordering code. ROBAR 2500 Series Repair Pads are available in nominal sizes from 4" to 12" (see page 2.4.1).

ROBAR INDUSTRIES LTD. B.C.

Phone

(604) 591-8811

LES PRODUITS INDUSTRIELS ROBAR INC. QUEBEC

Phone

1-800-663-6553 Fax

2.2.2

(604) 591-5288

(450) 641-9525

1-800-315-9525 Fax

(450) 641-4894 Effective: January 1, 2000

2506 SERVICE SADDLES CAST DUCTILE IRON PRODUCT INFORMATION

ROBAR

SIZES AVAILABLE: 2" to 12" Nominal Pipe OD. • Outlets from 3/4" to 2" in AWWA taper (CC) or female Iron pipe (IP). • Available in Single strap (SS) and double strap (DS) styles. • 2 1/2" or 3" IP male outlets are available on request. Style 2506 double strap only. • Fits steel (IPS), Cast Iron and Ductile Iron pipe. • Consult factory for other outlet sizes. APPLICATIONS: ROBAR 2506 Service Saddles are used to take a service outlet off a transmission or distribution line. The 2506 Service Saddle is recommended for use on C900 Pipe because of the wide strap configuration. Other products also recommended are 2406, 2606, and 2706. See individual product sheets for details.

2506 SS

2506 DS MATERIAL SPECIFICATION: Saddle Body: Cast Ductile Iron body (ASTM A536). Gaskets: SBR (Buna S) Rubber, (AWWA C111). Other compounds available. Saddle Straps: T304 Stainless Steel, fully ivated*. Fasteners: 1/2" NC T304 Stainless Steel. Coating: Corrosion Protective Epoxy coating (AWWA C213-79). OTHER CONFIGURATIONS: (See Product Information for each of the following) 2408: Enamel coated Cast Ductile body with Low Alloy Steel Straps. 2406: Enamel coated Cast Ductile body with T304 Stainless Steel Straps. HOW TO ORDER: Determine the product number (2506, 2408 or 2406), the high limit of range, (see page 2.3.2), outlet size, outlet thread, and strap style, and then use the appropriate ordering code as shown in the following example: 2506

-

product number

7.50"

x

high limit of range

3/4"

CC

outlet size

outlet thread

- SS strap style

i.e. 2506 - 7.50 x 3/4 CC - SS If a 12" Double Strap (DS) Saddle with a 2" CC tap is required for a 12" Ductile Iron pipe (13.20" OD), the ordering code is: 2506 - 14.38 x 2" CC - DS

Note:

* •

"ivated" refers to chemically treating Stainless Steel after welding to return it to its original high corrosion resistance and appearance. Alternative gasket materials are available. Refer to the Gasket Selection Chart and ROBAR for pricing and delivery.

ROBAR INDUSTRIES LTD.

B.C.

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: January 1, 2000

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

2.3.1

2506 SERVICE SADDLES CAST DUCTILE IRON PRODUCT INFORMATION

ROBAR

2506 SS

2506 DS

Designed for tapping into Steel, Ductile Iron, Cast Iron and Asbestos Cement pipe. Saddle straps and bodies are shaped to evenly and safely distribute the clamping load to the pipe. When tightened, they conform to the various diameters in each nominal size of pipe within specified working range. Refer to the ROBAR OD Chart (see page 0.9.1) for various pipe diameters.

SADDLES COMPLETE WITH FLAT WASHERS NOMINAL PIPE SIZE

WORKING RANGE LOW HIGH*

OUTLET SIZES AWWA (CC) OR IRON PIPE (IP)

SINGLE (SS)

STRAP STYLE DOUBLE (DS)

APPROXIMATE SHIPPING WEIGHT (LBS.)

(KG.)

2 3

2.38 3.25

2.56 3.54

3/4 - 1 3/4 - 1

SS SS

2.0 2.5

0.9 1.1

4

4.50

5.40

3/4 - 2

SS

5.0

2.3

6.5

2.9

7.50

3/4 - 2

SS

6.0

2.7

8.5

3.9

6.5

2.9

10.0

4.5

7.5

3.4

11.5

5.2

11.5

5.2

12.5

5.7

DS 6

6.62

DS 8

8.62

9.62

3/4 - 2

SS DS

10

10.75 12.12

3/4 - 2

SS

3/4 - 2

SS

DS 12

12.75 14.38

DS

All dimensions are in inches

Note:

* •

The high limit of the range is used in the ordering code. Large outlets: 2 1/2" and 3" IP male outlets are available in 2506 Series double strap only.

ROBAR INDUSTRIES LTD. B.C.

Phone

(604) 591-8811

LES PRODUITS INDUSTRIELS ROBAR INC. QUEBEC

Phone

1-800-663-6553 Fax

2.3.2

(604) 591-5288

(450) 641-9525

1-800-315-9525 Fax

(450) 641-4894 Effective: January 1, 2000

2606 SERIES SERVICE SADDLES FABRICATED STAINLESS STEEL PRODUCT INFORMATION

ROBAR

SERIES 2606 STANDARD SIZES: 2" to 24" Nominal Pipe OD with outlets available from 3/4" to 2" AWWA taper (CC) or female Iron Pipe (IP). 2616 (one section) • Single bolt closure (SB) on 2" through 8" nominal pipe sizes. • Double bolt closures (DB) on 2" through 12" nominal pipe sizes. 2626 (two sections) • Double (DB) bolt closures on 14" through 18" nominal pipe sizes. 2636 (three sections) • Double (DB) bolt closures on 20" through 24" nominal pipe sizes.

2616 SB

2626 DB

2636 DB

APPLICATIONS: ROBAR 2606 Service Saddles are used to take a service outlet off any transmission or distribution supply line. Especially recommended for plastic pipe or where corrosion is a factor.

MATERIAL SPECIFICATION: Saddle Body: T304 Stainless Steel, fully ivated*. Gasket: SBR (Buna S) Rubber (AWWA C111)**. Fasteners: 5/8" NC T304 Stainless Steel studs, rolled threads. OPTIONS: • •

2 1/2" and 3" outlets are available on nominal sizes above 6". Saddle body can be made wider if required.

HOW TO ORDER: Determine the product number (2616, 2626, or 2636), the high limit of range, (see page 2.5.2, 2.5.3), outlet size, outlet thread, and bolt style, and then use the appropriate ordering code as shown in the following examples. 2616 7.50" x 3/4" CC - SB product number

high limit of range

outlet

outlet thread

bolt style

i.e. 2616 - 7.50 x 3/4 CC - SB

Note:

* ** •

"ivated" refers to chemically treating Stainless Steel after welding to return it to its original high corrosion resistance and appearance. Alternative gasket materials are available. Refer to the Gasket Selection Chart (see page 0.8.1) and ROBAR for pricing and Delivery. Please ROBAR with your special requirements to determine availability, price and delivery.

ROBAR INDUSTRIES LTD. B.C.

Phone

(604) 591-8811

LES PRODUITS INDUSTRIELS ROBAR INC. QUEBEC

Phone

1-800-663-6553 Fax Effective: January 1, 2000

(604) 591-5288

(450) 641-9525

1-800-315-9525 Fax

(450) 641-4894

2.5.1

2616 SERVICE SADDLES FABRICATED STAINLESS STEEL PRODUCT INFORMATION

ROBAR

2616 SB

2616 DB

SERIES 2600 NOMINAL PIPE SIZE

WORKING RANGE PIPE LOW OD HIGH*

OUTLET SIZES AWWA (CC) OR IRON PIPE (IP)

BOLT STYLE SINGLE (SB)

3/4 - 1**

SB

3/4 - 1”

DOUBLE (DB)

SADDLE WIDTH

APPROXIMATE SHIPPING WEIGHT (LBS.)

(KG.)

4.8

1.5

0.7

SB

4.8

1.8

0.8

3/4 - 1

SB

4.8

2.0

0.9

3/4 - 1 3/4 - 1

SB

4.8

2.5

1.1

DB

6.0

3.3

1.5

DB

8.0 4.8

3.9 3.0

1.6 1.4

DB

6.0

3.8

1.7

DB

8.0 4.8

4.0 3.5

1.8 1.6

DB

6.0

4.8

2.2

DB

8.0

5.0

2.3

3/4 - 1

DB

6.0

5.8

2.5

1 1/4 - 2

DB

8.0

6.0

2.7

DB

6.0

6.8

3.0

DB

8.0

7.0

3.2

(Actual)

2

2 1/2

3

4

6

8

10

12

2.30 2.50 2.70 2.90 3.15 3.40 3.65 3.90 4.00 4.40 4.80 5.20 5.60 6.00 6.40 6.60 6.80 7.20 7.60 8.00 8.40 8.60 9.00 9.20 9.60 10.00 10.40 10.70 11.10 11.60 12.00 12.40 12.75 13.10 13.60

2.38 2.88

3.50

4.00 4.50 4.80

6.00 6.63 6.90

8.00 8.63 9.05

10.00 10.75 11.10 12.00 12.75 13.20

2.50 2.70 2.90 3.15 3.40 3.80 3.90 4.10 4.40 4.80 5.20 5.60 6.00 6.40 6.80 7.00 7.20 7.60 8.00 8.40 8.80 9.05 9.40 9.60 10.00 10.40 10.80 11.10 11.50 12.00 12.40 12.80 13.20 13.50 14.00

1 1/4 - 2 3/4 - 1

SB

3/4 - 1 1 1/4 - 2 3/4 - 1 3/4 - 1

SB

1 1/4 - 2

3/4 - 1

1 1/4 - 2

All dimensions are in inches

Note:

* The high limit of the range is used in the ordering code. ** 1" IP only. • This product can be manufactured to your specification. For ranges and configurations other than those listed ROBAR.

ROBAR INDUSTRIES LTD.

B.C.

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: January 1, 2000

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

2.5.2

2626 SERVICE SADDLES FABRICATED STAINLESS STEEL PRODUCT INFORMATION

ROBAR

2626 SB

2626 DB

SERIES 2600 NOMINAL PIPE

WORKING RANGE

SIZE

3

4

6

8

10

12

14

16

18

OUTLET SIZES ** AWWA (CC)

SHIPPING WEIGHT LBS. (Approx.)

LOW

PIPE OD HIGH (Actual) *

3.50

4.25

3/4 - 1

4.8 6.0

2.0

3.45 4.45 4.74

4.50 4.80

5.25 5.54

3/4 - 1

4.8

3.0

5.35 5.90 6.40 6.85 7.05 7.95 8.40

6.00 6.63 6.90 8.00 8.63

6.15 6.70 7.20 7.65 7.85 8.75 9.20

9.00 9.05 9.80 9.30 10.10 10.00 10.00 10.80 10.70 10.75 11.50 11.05 11.10 11.85 11.40 12.20 12.00 12.70 13.10 13.40 13.70 14.00 14.95 15.75 15.60 16.40 17.20 17.60 18.00 18.40 18.80 19.20

12.00 12.80 12.75 13.50 13.20 13.90 14.20 14.50 14.00 14.80 15.30 15.75 16.55 16.00 16.40 17.20 17.40 18.00 18.40 18.00 18.80 19.20 19.60 19.50 20.00

OR IRON PIPE (IP)

SADDL E WIDTH

3/4 1 1/4 3/4 3/4 1 1/4 -

SINGLE BOLT

DOUBLE BOLT

3.0

1 2 1 1 2

6.0 8.0 4.8 6.0 8.0

3.5 4.0 3.5

3/4 - 1

4.8

4.5

3/4 - 1 1 1/4 - 2

6.0 8.0

5.0 5.5

3/4 - 1 1 1/4 - 2

6.0 8.0

6.5 7.0

3/4 - 1

6.0

8.0

1 1/4 - 2

8.0

8.5

3/4 - 1 1 1/4 - 2

6.0 8.0

8.5 9.0

3/4 - 1 1 1/4 - 2

6.0 8.0

9.8 10.3

3/4 - 1

6.0

10.8

1 1/4 - 2

8.0

11.2

4.0 4.75

All dimensions are in inches

Note:

* The high limit of the range is used in the ordering code. ** 2 1/2" and 3" IP outlets available on nominal sizes above 6". • This product can be manufactured to your specifications. For ranges and configurations other than those listed, ROBAR.

ROBAR INDUSTRIES LTD.

B.C.

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: January 1, 2000

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

2.5.3

2636 SERVICE SADDLES FABRICATED STAINLESS STEEL PRODUCT INFORMATION

ROBAR

2636 DB

SERIES 2600

NOMINAL PIPE SIZE

WORKING RANGE PIPE LOW OD HIGH*

OUTLET SIZES** AWWA (CC) OR IRON PIPE (IP)

SADDLE WIDTH

SHIPPING WEIGHT LBS. (Approx.) DOUBLE BOLT

3/4 - 1

6

10.75

1 1/4 - 2 3/4 - 1 1 1/4 - 2 3/4 - 1

8 6 8 6

11.25 11.75 12.15 12.75

1 1/4 - 2

8

13.15

3/4 - 1

6

12.75

1 1/4 - 2

8

13.15

(Actual)

16

18 20

24

15.92 16.25 17.10 18.00 19.20 21.40 22.80 23.45 24.45 25.50 28.25 29.40 29.85 30.85

16.00 17.12 17.45 17.40 18.30 18.00 19.20 19.50 20.40 21.60 22.60 24.00 24.65 25.65 25.80 26.70 29.45 30.60 31.05 32.05

All dimensions are in inches

Note:

* The high limit of the range is used in the ordering code. ** 2 1/2" and 3" IP outlets available. • This product can be manufactured to your specifications. For ranges and configurations other than those listed, ROBAR.

ROBAR INDUSTRIES LTD.

B.C.

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: January 1, 2000

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

2.5.4

2706 SERVICE SADDLES CAST BRONZE PRODUCT INFORMATION

ROBAR

SIZES AVAILABLE: 4" to 24" Nominal Pipe OD. • Outlets from 3/4" to 2" in AWWA taper (CC) or female Iron pipe (IP). • Fits Steel (IPS), Cast Iron and Ductile Iron size pipe and AC/RB. • Consult factory for other outlet sizes. • Recommended for C900 pipe.

2706 SS

2706 DS

APPLICATIONS: ROBAR 2706 Service Saddles are used to take a service outlet off a transmission or distribution line. Waterworks Bronze and ivated T304 Stainless Steel are "noble" materials which are closely related to each other near the top of the Galvanic Scale of corrosion resistance. Unlike pairs of widely dissimilar metals, they will both exhibit long life in most 'hot' soil environments.

MATERIAL SPECIFICATION: Saddle Body: Cast Bronze Waterworks (ASTM B62 and AWWA C-800). Gaskets: SBR (Buna S) Rubber (AWWA C111). Saddle Straps: T304 Stainless Steel, rolled threads, fully ivated*. Fasteners: 1/2" NC T304 Stainless Steel. HOW TO ORDER: Determine the product number (2706), the high limit of range, (see page 2.6.2, 2.6.3), outlet size, outlet thread, and strap style, and order by using appropriate ordering code as shown in the following example: If a Single strap (SS) Saddle with a 3/4" CC tap is required for a 6" Ductile Iron pipe (6.90" OD), the ordering code is: 2706 7.60" x 3/4" CC - SS product number

high limit of range

outlet size

outlet thread

strap style

i.e. 2706 - 7.60 x 3/4 CC-SS If a 12" Double strap (DS) Saddle with a 2" IP tap is required for a 12" C900 PVC pipe (13.20" OD), the ordering code is: 2706 - 13.30 x 2 IP - DS

Note:

*

"ivated" refers to chemically treating Stainless Steel after welding to return it to its original high corrosion resistance and appearance.

ROBAR INDUSTRIES LTD.

B.C.

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: January 1, 2000

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

2.6.1

2706 SERVICE SADDLES CAST BRONZE PRODUCT INFORMATION

ROBAR

2706 SS

2706 DS

ROBAR 2706 Service Saddles are strong and resist corrosion. They fit pipes from Standard Steel size to Rough Barrel Asbestos Cement size. Flexible straps adapt readily to the pipe, evenly distributing load and easing installation.

SADDLES COMPLETE WITH FLAT WASHERS NOMINAL PIPE SIZE

WORKING RANGE LOW HIGH*

4

4.50

5.60

6

6.60

7.60

OUTLET SIZES AWWA (CC) OR IRON PIPE (IP)

SINGLE (SS)

3/4 - 1 1 1/4 - 2 3/4 - 1 1 1/4 - 2

SS SS SS SS

STRAP STYLE

3/4 - 2 8

10

8.60

9.80

10.70 11.20

3/4 - 1

DOUBLE (DS)

APPROXIMATE SHIPPING WEIGHT (LBS.)

DS SS

(KG.)

2.0 3.5 2.8 3.3

0.9 1.6 1.3 1.5

6.3

2.9

3.3

1.5

3/4 - 2

DS

6.5

3.0

3/4 - 2

DS

7.3

3.3

3/4 - 2

DS

8.5

3.9

8.8

4.0

11.10 12.30 12

12.70 13.30 13.10 14.55

14

15.10 15.70

3/4 - 2

DS

8.8

4.0

3/4 - 2

DS

9.3

4.2

3/4 - 2

DS

11.4

5.1

3/4 - 2

DS

12.2

5.5

3/4 - 2

DS

13.4

6.1

15.20 16.85 16

18

20

24

17.20 18.40 17.40 18.60 19.50 19.70 21.00 20.70 21.70 22.40 23.10 24.60 26.48 27.85

19.20 20.40 21.30 21.50 22.80 22.50 23.50 24.20 24.90 26.40 27.15 29.65

All dimensions are in inches

Note:

* •

The high end of the range is used in the ordering code. Other OD ranges are available upon request.

ROBAR INDUSTRIES LTD. B.C.

Phone

(604) 591-8811

LES PRODUITS INDUSTRIELS ROBAR INC. QUEBEC

Phone

1-800-663-6553 Fax

2.6.2

(604) 591-5288

(450) 641-9525

1-800-315-9525 Fax

(450) 641-4894 Effective: January 1, 2000

2786 ISOLATING SADDLES CAST BRONZE PRODUCT INFORMATION

ROBAR

SIZES AVAILABLE: 4" to 16" Nominal Pipe OD. • Outlets from 3/4" to 2" in AWWA taper (CC) or female Iron Pipe (IP); (3/4” to 1 1/4” for 4” saddle). • Fits Steel (IPS), Cast Iron and Ductile Iron pipe. APPLICATIONS: ROBAR 2786 Isolating Saddles are used to electrically isolate an outlet or service line from a main distribution line. Primarily used in cathodically protected systems or to separate dissimilar metals. Waterworks Bronze and ivated T304 Stainless Steel are "noble" materials which are closely related to each other near the top of the Galvanic Scale of corrosion resistance. Unlike pairs of widely dissimilar metals, they will both exhibit long life in most 'hot' soil environments. MATERIAL SPECIFICATION: Saddle Body: Waterworks Bronze (ASTM B62 andAWWA C-800). Gaskets (Body & Strap): SBR (Buna S) Rubber Isolating compound, (ASTM D2000-80 AA 615). Strap & Armor: T304 Stainless Steel, fully ivated*. Fasteners: 1/2" NC T304 Stainless Steel studs, rolled threads.

NOM. PIPE SIZE

WORKING RANGE LOW HIGH**

4 6 8 10 12

ELECTRICAL SPECIFICATIONS: Conditions: Laboratory, torque level 45 ft. lbs. Resistance: 800 Mega ohms @ 10,000 volts DC. Breakdown Voltage: Minimum 12,000 volts DC.

4.50 6.60 8.60 10.70 12.70 13.80 15.20 17.20

14 16

5.30 7.40 9.40 11.50 13.50 14.40 16.00 18.00

APPROXIMATE SHIPPING WT. (LBS.) (KG.) 6.7 7.2 7.5 8.0 9.2 10.2 10.5 11.0

2.3 3.2 3.4 3.6 4.2 4.6 4.8 5.0

All dimensions are in inches

Note: 4” Saddle available in 3/4” and 1” Outlets only. HOW TO ORDER: Determine the product number (2786), the high limit of range, (see table above), outlet size and outlet thread, and then use the appropriate ordering code as shown in the following example. If an Isolating Saddle with a 3/4" CC outlet is required for 6" Standard Steel pipe (6.63" OD) the ordering code is: 2786 7.40" x 3/4" CC product number

high limit of range

outlet size

outlet thread

i.e. 2786 - 7.40 x 3/4 CC Note:

* ** •

"ivated" refers to chemically treating Stainless Steel after welding to return it to its original high corrosion resistance and appearance. The high limit of the range is used in the ordering code. The 2786 is designed to be installed with a maximum torque of 45 ft. lbs. This enables the saddle to perform to its maximum electrical isolating capability.

ROBAR INDUSTRIES LTD. B.C.

Phone

(604) 591-8811

LES PRODUITS INDUSTRIELS ROBAR INC. QUEBEC

Phone

1-800-663-6553 Fax Effective: January 1, 2000

(604) 591-5288

(450) 641-9525

1-800-315-9525 Fax

(450) 641-4894

2.8.0

SECTION 3 - CONTENTS SEWER SADDLES

ROBAR

SEWER SADDLES 3606

Fabricated T304 SS

3.1.1

3626

Fabricated T304 SS, SS Fasteners, Outlet opposite closure

3.1.2

3696

Fabricated T304 SS, SS Fasteners, Outlet 90º to closure

3.1.2

ROBAR INDUSTRIES LTD.

B.C.

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: January 1, 2000

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

3.0.1

3606 SEWER SADDLE STAINLESS STEEL PRODUCT INFORMATION

ROBAR

STANDARD SIZES: 6" to 18" Nominal Pipe OD on main line, 4" IPS inlet line. Sizes other than those specified may be ordered by ing ROBAR for quotation. APPLICATIONS: ROBAR 3606 Sewer Saddles are used to make a 4" inlet branch to a gravity main sewer line. Particularly suited for High Density Polyethylene pipe. Strapping material is not included with product.

MATERIAL SPECIFICATION: Body: T304 Stainless Steel (ASTM A743), fully ivated*. Gaskets: 1/2" x 1/2" square section closed cell neoprene, (ASTM D2000). Fasteners: Not included. OTHER CONFIGURATIONS: 3626: With two 1/2" NC T304 Stainless steel fasteners, (Outlet opposite closure) (see page 3.1.2). 3696: With two 1/2" NC T304 Stainless steel fasteners, (Outlet at 90° to closure) (see page 3.1.2). HOW TO ORDER: Determine the product number (3606, 3626, or 3696), the OD of sewer main and the actual OD of the branch, then order by using the appropriate ordering code as shown in the following example. If a 4" branch (4.50" OD) off of a 12" HDPE sewer main is required, the ordering code is: 3606 12.75" x 4.50" product number

main OD

branch OD

i.e. 3606 - 12.75 x 4.50

Note:

* • •

"ivated" refers to chemically treating Stainless Steel after welding to return it to its original high corrosion resistance and appearance. Standard branch outlet is 4" nominal (4.63" OD) accepts 4.50" OD. Special designs, lengths or diameters may be obtained from the factory on request.

ROBAR INDUSTRIES LTD.

B.C.

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: January 1, 2000

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

3.1.1

3626 & 3696 SEWER SADDLE STAINLESS STEEL PRODUCT INFORMATION

ROBAR

STANDARD SIZES: 6" to 18" Nominal Pipe OD on main line, 4" IPS inlet line. Sizes other than those specified may be ordered by ing ROBAR for quotation. APPLICATIONS: ROBAR 3626 & 3696 Sewer Saddles are used to make a 4" inlet branch to a main sewer line (4" - 4.50" OD is standard). Particularly suited for High Density Polyethylene pipe. 3626

3696 MATERIAL SPECIFICATION: Body: T304 Stainless Steel (ASTM A743), fully ivated*. Gaskets: 1/2" x 1/2" square section closed cell Neoprene, (ASTM D200). Fasteners: 1/2" NC T304 Stainless Steel Studs and washers. OTHER CONFIGURATIONS: 3606: T304 Stainless Steel, ivated* for maximum corrosion resistance. 3696: Similar to 3626 but with outlet at 90° to closure. HOW TO ORDER: Determine the product number (3626 or 3696), OD of sewer main and branch, then order by using the appropriate ordering code as shown in the following example. If a 4" branch off a 12" High Density Polyethylene (HDPE) sewer main is required, the ordering code is: 3626 12.75" x 4.50" product number

Main OD .

branch OD

i.e. 3626 - 12.75 x 4.50

Note:

* • •

"ivated" refers to chemically treating Stainless Steel after welding to return it to its original high corrosion resistance and appearance. Standard branch outlet is 4" nominal (4.50" OD). Special designs, lengths or diameters may be obtained from the factory on request.

ROBAR INDUSTRIES LTD.

B.C.

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: January 1, 2000

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

3.1.2

SECTION 4 - CONTENTS RESTRAINERS

ROBAR

RESTRAINERS 4400

Cast Ductile Iron, Ductile Pipe size

4.1.1

4401

Cast Ductile Iron, Steel Pipe size

4.2.0

4499

Cast Ductile Iron

4.9.1

ROBAR INDUSTRIES LTD.

B.C.

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: January 1, 2000

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

4.0.1

4400 RESTRAINER CAST DUCTILE IRON PRODUCT INFORMATION

ROBAR

DUCTILE PIPE SIZE SIZES AVAILABLE: 4" to 12" C900 PVC. APPLICATIONS: 4400 Restrainers are used for restraining Cast Iron fittings used with C900 PVC pipe.

Note: Also available with Fusion Bonded Epoxy Coating with T304 SS fasteners.

MATERIAL SPECIFICATION: Body: Cast Ductile Iron (ASTM A536). Fasteners: 5/8” or 3/4" NC "Hex" bolts (AWWA C111).

C A

HOW TO ORDER: Determine the product number (4400) and the nominal pipe size and then order by using the appropriate ordering code (see table below), as shown in the following example.

B

For an 8" C900 PVC pipe (9.05" OD), the ordering code is: 4400 8" product number

nominal pipe size

i.e. 4400 - 8

NOMINAL PIPE ORDERING SIZE CODE 4 4400-4 6 4400-6 8 4400-8 10 4400-10 12 4400-12

Note:

*

PVC PIPE DUCTILE OD 4.80 6.90 9.05 11.10 13.20

A 1 1/8 1 1/8 1 1/4 1 5/8 1 5/8

Restraining rods, as shown, are not normally supplied with restrainers.

ROBAR INDUSTRIES LTD.

B.C.

APPROXIMATE B C CLAMPING BOLTS SHIPPING WEIGHT DIA. MAX. NO. SIZE (LBS.) (KG.) 9 1/8 6 2 5/8 x 4 6.5 3.0 11 1/8 6 2 5/8 x 4 8.5 3.9 13 7/8 6 2 3/4 x 5 13.0 5.9 15 1/4 6 4 7/8 x 5 15.15 6.9 17 1/4 6 4 7/8 x 5 18.00 8.2 All dimensions are in inches

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: January 1, 2000

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

4.1.1

4401 RESTRAINER CAST DUCTILE IRON PRODUCT INFORMATION

ROBAR

STEEL PIPE SIZE SIZES AVAILABLE: 4" to 12" IPS PVC. APPLICATIONS: 4401 Restrainers are used for restraining Cast Iron fittings used with IPS PVC pipe.

Note: Also available with Fusion Bonded Epoxy Coating with T304 SS fasteners.

MATERIAL SPECIFICATION: Body: Cast Ductile Iron (ASTM A536). Fasteners: 5/8 or 3/4" NC "Hex" bolts (AWWA C111).

C A

HOW TO ORDER: Determine the product number (4401) and the nominal pipe size and then order by using the appropriate ordering code (see table below), as shown in the following example. For a 6" PVC pipe (6.63" OD), the ordering code is: 4401 product number

B 6" nominal pipe size

i.e. 4401 - 6

NOMINAL PIPE ORDERING SIZE CODE 4 4401-4 6 4401-6 8 4401-8 10 4401-10 12 4401-12

Note:

*

PVC PIPE IPS OD 4.50 6.625 8.625 10.75 12.75

A

B

1 1/8 1 1/8 1 1/4 1 5/8 1 5/8

9 1/8 11 1/8 13 7/8 15 1/4 17 1/4

APPROXIMATE SHIPPING WEIGHT (LBS.) (KG.) 6.5 3.0 8.5 3.9 13.0 5.9 16.1 7.3 16.7 7.6 All dimensions are in inches

Restraining rods, as shown, are not normally supplied with restrainers.

ROBAR INDUSTRIES LTD.

B.C.

C CLAMPING BOLTS MAX. NO. SIZE 6 2 5/8 x 4 6 2 5/8 x 4 6 2 3/4 x 5 6 4 7/8x 5 6 4 7/8 x 5

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: January 1, 2000

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

4.2.0

4499 RESTRAINT LUG CAST DUCTILE IRON PRODUCT INFORMATION

ROBAR

SIZES AVAILABLE: One size. APPLICATIONS: ROBAR 4499 Restraint Lugs are designed for use on Mechanical t Fittings to prevent pull-out.

MATERIAL SPECIFICATION: Cast Ductile Iron (ASTM A536). HOW TO ORDER: Specify ROBAR Product Number (4499).

ROBAR PRODUCT NUMBER 4499

SDR 26 INSTALLATION

APPROXIMATE SHIPPING WEIGHT (LBS.) (KG.) 0.85

0.39

C900 OR SDR 18 INSTALLATION

ROBAR INDUSTRIES LTD.

B.C.

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: January 1, 2000

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

4.9.1

SECTION 5 - CONTENTS REPAIR CLAMPS

ROBAR

REPAIR CLAMPS All Stainless Repair Clamps

5.2.1

5616

Style 1

5.2.2

5626

Style 2

5.2.3

Style 3

5.2.4

5636 5696

Medium Duty Partial Wrap, Fabricated T304 SS

5.6.1

5606

Medium Duty Full Wrap, Fabricated T304 SS

5.6.2

ROBAR INDUSTRIES LTD.

B.C.

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: January 1, 2000

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

5.0.1

ALL STAINLESS REPAIR CLAMPS PRODUCT INFORMATION

ROBAR

ROBAR IS THE ORIGINAL DEVELOPER AND PATENT HOLDER OF THE "ALL STAINLESS REPAIR CLAMP". ALWAYS SPECIFY "ROBAR" WHEN ORDERING REPAIR CLAMPS.

5616

APPLICATIONS: ROBAR 5600 Series Repair Clamps are used to effectively repair holes or breaks in water mains. STANDARD SIZES: 3" to 24" Nominal pipe OD with standard lengths from 6" to 24". STANDARD CONFIGURATIONS: 5616 1 Section (Style 1) sizes 3 -12" Page 5.2.2 5626 2 Sections (Style 2) sizes 3 -14" Page 5.2.3 5636 3 Sections (Style 3) sizes 10 -24" Page 5.2.4

5626

ROBAR Repair Clamps can be manufactured to fit a wide range of designs, lengths or diameters. For sizes not listed, call ROBAR. Tapped outlets are available for all repair clamps. MATERIAL SPECIFICATION: Shell: T304 Stainless Steel - fully ivated.* Sidebar: T304 Stainless Steel - fully ivat ed.* Armor: T304 Stainless Steel - fully ivated.* Gasket: SBR (Buna S) Rubber, (AWWA C111). Fasteners: 5/8" NC T304 Stainless steel. OPTIONS: • Outlet taps: 3/4" to 3" IP or 3/4" to 2" CC. • Other steel and rubber material specifications. • Multiple sections other than those specified above.

5636 Note:

*

"ivated" refers to chemical treatment after welding to return Stainless Steel to its original high corrosion resistance and appearance.

ROBAR INDUSTRIES LTD.

B.C.

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: January 1, 2000

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

5.2.1

5616 REPAIR CLAMP (STYLE 1) FABRICATED STAINLESS STEEL PRODUCT INFORMATION

ROBAR

NOMINAL PIPE SIZE

WORKING RANGE PIPE LOW OD HIGH*

APPROX. SHIPPING WEIGHT (LBS.) LENGTH OF CLAMP (Common Sizes) 6"

8"

12"

16"

24"

4.8 lbs 5.0 lbs

6.8 lbs 7.0 lbs

9.0 lbs 9.50 lbs

12.0 lbs 12.5 lbs

19.5 lbs 20.0 lbs

5.5 lbs

7.3 lbs

10.5 lbs

13.8 lbs

21.3 lbs

6.3 lbs

8.3 lbs

12.0 lbs

15.8 lbs

24.0 lbs

7.0 lbs

9.3 lbs

13.0 lbs

17.0 lbs

26.5 lbs

10.25 lbs

14.25 lbs

17.75 lbs

28.50 lbs

12.25 lbs

16.25 lbs

21.25 lbs

33.25 lbs

(Actual)

3 3.5 4

6

8

10

12

3.45 3.95 4.45 4.74 5.05 5.35 5.95 6.40 6.60 6.85 7.05 7.40 7.95 8.40 8.60 9.00 9.30 9.75 10.50 10.70 11.05 11.40 11.70 12.00 12.55 12.70 13.10 13.40 13.70 14.00

3.50 4.50 4.80

6.00 6.63 6.90

8.00 8.63 9.05 10.00 10.75 11.10

12.00 12.75 13.20

3.85 4.35 4.85 5.14 5.45 5.75 6.35 6.80 7.00 7.25 7.45 7.80 8.35 8.80 9.00 9.40 9.70 10.15 10.90 11.10 11.45 11.80 12.10 12.40 12.95 13.10 13.50 13.80 14.10 14.40

All dimensions are in inches

HOW TO ORDER: (see page 5.2.1) Determine the product number (5616), high limit number (see table above), length of clamp and outlet size if any and then order by using the appropriate ordering code as shown in the following example. For a one section (Style 1) clamp, 8" long, for a pipe with an OD of between (6.85" - 7.25"), the ordering code is: 5616 7.25" x 8" product number

high limit of range

clamp width

i.e. 5616 - 7.25 x 8 As above but with a 3/4" CC outlet: Note:

* •

5616 - 7.25 - 8 x 3/4CC.

The high limit of the range is used in the ordering code. Prices for special designs, lengths or diameters may be obtained from the factory on request. If tapped outlets are required, add outlet price from price list.

ROBAR INDUSTRIES LTD.

B.C.

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: January 1, 2000

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

5.2.2

5626 REPAIR CLAMP (STYLE 2) FABRICATED STAINLESS STEEL PRODUCT INFORMATION

ROBAR

NOMINAL PIPE SIZE

WORKING RANGE PIPE LOW OD HIGH*

APPROX. SHIPPING WEIGHT (LBS.) LENGTH OF CLAMP (Common Sizes) 8"

12"

16"

24"

8.8 lbs

9.0 lbs

12.0 lbs

19.5 lbs

10.8 lbs

16.0 lbs

21.0 lbs

32.3 lbs

11.3 lbs

17.0 lbs

21.5 lbs

34.5 lbs

12.5 lbs

18.3 lbs

23.5 lbs

36.8 lbs

13.8 lbs

19.3 lbs

25.0 lbs

38.5 lbs

15.8 lbs

23.5 lbs

28.3 lbs

46.8 lbs

16.5 lbs

24.5 lbs

29.8 lbs

48.8 lbs

(Actual)

3 4

6

8

10

12

14

3.45 4.45 4.74 5.35 5.90 6.40 6.85 7.05 7.95 8.40 9.00 9.30 10.00 10.70 11.05 11.40 12.00 12.70 13.10 13.40 13.70 14.00 14.95 15.75

3.50 4.50 4.80 6.00 6.63 6.90 8.00 8.63 9.05 10.00 10.75 11.10 12.00 12.75 13.20

14.00 15.30

4.25 5.25 5.54 6.15 6.70 7.20 7.65 7.85 8.75 9.20 9.80 10.10 10.80 11.50 11.85 12.20 12.80 13.50 13.90 14.20 14.50 14.80 15.75 16.55

All dimensions are in inches

HOW TO ORDER: (see page 5.2.1) Determine the product number (5626), high limit number (see table above), length of clamp and outlet size if any and then order by using the appropriate ordering code as shown in the following example. For a two section (Style 2) clamp, 12" long, for a pipe with an OD of between (7.05" - 7.85"), the ordering code is: 5626 7.85" x 12" product number

high limit of range

clamp width

i.e. 5626 - 7.85 x 12 As above but with a 3/4" CC outlet:

Note:

* •

5626 - 7.85 - 12 x 3/4 CC

The high limit of the range is used in the ordering code. Prices for special designs, lengths or diameters may be obtained from the factory on request. If tapped outlets are required, add outlet price from price list.

ROBAR INDUSTRIES LTD.

B.C.

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: January 1, 2000

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

5.2.3

5636 REPAIR CLAMP (STYLE 3) FABRICATED STAINLESS STEEL PRODUCT INFORMATION

ROBAR

NOMINAL PIPE SIZE

WORKING RANGE PIPE LOW OD HIGH

APPROX. SHIPPING WEIGHT (LBS.) LENGTH OF CLAMP (Common Sizes) 8"

12"

16"

24"

17.0 lbs 18.5 lbs

28.5 lbs 31.0 lbs

38.5 lbs 40.5 lbs

60.0 lbs 62.5 lbs

20.0 lbs

33.0 lbs

43.0 lbs

65.5 lbs

22.5 lbs

34.0 lbs

45.50 lbs

67.50 lbs

23.0 lbs

34.5 lbs

46.0 lbs

69.0 lbs

24.0 lbs

37.0 lbs

48.00 lbs

72.0 lbs

28.0 lbs

41.0 lbs

52.0 lbs

84.0 lbs

(Actual)

10 12 14 16 18

20

24

11.00 13.10 13.65 14.85 15.92 17.10 16.25 18.00 19.20 21.40 22.80 23.45 24.45 25.50 28.25 29.40 29.85 30.85

11.10 13.20 14.00 15.30 16.00 17.40 18.00 19.50 21.60 24.00 25.80

12.20 14.30 14.85 16.05 17.12 18.30 17.45 19.20 20.40 22.60 24.00 24.65 25.65 26.70 29.45 30.60 31.05 32.05

All dimensions are in inches

HOW TO ORDER (see page 5.2.1) Determine the product number (5636), high limit number (see table above), length of clamp and outlet size and then order by using the appropriate ordering code as shown in the following example. For a three section (Style 3) clamp, 16" long, for a pipe with an OD of between (21.40" - 22.60"), the ordering code is: 5636 22.60" x 16" product number

high limit of range

clamp width

i.e. 5636 - 22.60 x 16 As above but with a 3/4" CC outlet:

Note:

* •

5636 - 22.60 x 16 x 3/4 CC.

The high limit of the range is used in the ordering number. Prices for special designs, lengths or diameters may be obtained from the factory on request. If tapped outlets are required, add outlet price from price list.

ROBAR INDUSTRIES LTD.

B.C.

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: January 1, 2000

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

5.2.4

5696 REPAIR CLAMPS FABRICATED STAINLESS STEEL PRODUCT INFORMATION

ROBAR

SERIES 301 STANDARD SIZES: 2" to 8" Nominal pipe OD with standard lengths from 4" to 12". APPLICATIONS: ROBAR 5696 Single Section Repair Clamps are used to repair small punctures, pinholes and splits which do not require the full wrap-around gasket provided by the 5606 repair clamp.

NOMINAL WORKING PIPE RANGE SIZE LOW HIGH*

MATERIAL SPECIFICATION: Shell: T304 Stainless Steel - fully ivated*. Sidebar: T304 Stainless Steel - fully ivated*. Gasket: SBR (Buna S) Rubber, (AWWA C111). Fasteners: 1/2" NC T304 Stainless Steel.

APPROX. SHIPPING WEIGHT (LBS.) CLAMP WIDTH (Common Sizes) 4" 6" 8" 12"

2

1.90 2.00 2.25 2.37 2.87

2.15 2.25 2.50 2.62 3.12

1.0 lbs

1.8 lbs

2.0 lbs

3

3.12

3.37

1.3 lbs

2.0 lbs

2.5 lbs

3.8 lbs

3.50

3.75

4.12

4.37

1.5 lbs

2.5 lbs

3.0 lbs

4.5 lbs

4.50

4.75

6.12

6.37

2.0 lbs

3.3 lbs

4.0 lbs

6.0 lbs

6.63

6.88

8.63

8.88

3.8 lbs

5.0 lbs

7.5 lbs

4 6 8

2.5 lbs

All dimensions are in inches

HOW TO ORDER: Determine the product number (5696), high limit of range (see table above) and length of clamp and then order by using the appropriate ordering code as shown in the following example. For a 12" long clamp on a pipe with an OD of between (6.63" - 6.88"), the ordering code is: 5696 product number

-

6.88"

x

high limit of range

12" clamp width

i.e. 5696 - 6.88 x 12 Note:

* •

"ivated" refers to chemically treating Stainless Steel after welding to return it to its original high corrosion resistance and appearance. Prices for special designs, lengths or diameters may be obtained from the factory on request.

ROBAR INDUSTRIES LTD. B.C.

Phone

(604) 591-8811

LES PRODUITS INDUSTRIELS ROBAR INC. QUEBEC

Phone

1-800-663-6553 Fax Effective: January 1, 2000

(604) 591-5288

(450) 641-9525

1-800-315-9525 Fax

(450) 641-4894

5.6.1

5606 REPAIR CLAMPS FABRICATED STAINLESS STEEL PRODUCT INFORMATION

ROBAR

SERIES 302 STANDARD SIZES: 2" to 8" Nominal pipe OD with standard lengths from 4" to 12". APPLICATIONS: ROBAR 5606 Single Section Repair Clamps are used to repair small holes or breaks in water mains.

MATERIAL SPECIFICATION: Shell: T304 Stainless Steel - fully ivated*. Armor: T304 Stainless Steel - fully ivated*. Sidebar: T304 Stainless Steel - fully ivated*. Gasket: SBR (Buna S) Rubber, (AWWA C111). Fasteners: 1/2" NC T304 Stainless Steel.

NOMINAL WORKING PIPE RANGE SIZE LOW HIGH*

2

3

HOW TO ORDER: Determine the product number (5606), high limit of range (see table right) and length of clamp and then order by using appropriate ordering code as shown in the following example. For a 12" long clamp on a pipe with an OD of between (6.85" - 7.10"), the ordering code is: 5606 7.10" product number

high limit of range

4

6

8

x

2.12 2.25 2.37 2.63 2.87 3.25 3.50 3.74 4.45

2.37 2.50 2.62 2.88 3.12 3.50 3.75 3.99 4.70

4.75

5.00

6.58

6.83

6.85

7.10

8.58

8.83

9.00

9.25

APPROX. SHIPPING WEIGHT (LBS.) CLAMP WIDTH (Common Sizes) 4" 6" 8" 12"

1.0 lbs

1.8 lbs

2.0 lbs

3.1 lbs

1.5 lbs

2.5 lbs

3.0 lbs

4.5 lbs

1.8 lbs

3.0 lbs

4.5 lbs

5.3 lbs

2.5 lbs

3.8 lbs

5.0 lbs

7.5 lbs

2.8 lbs

4.5 lbs

5.5 lbs

8.3 lbs

All dimensions are in inches

12" clamp width

i.e. 5606 - 7.10 x 12

Note:

* •

"ivated" refers to chemically treating Stainless Steel after welding to return it to its original high corrosion resistance and appearance. Prices for special designs, lengths or diameters may be obtained from the factory on request.

ROBAR INDUSTRIES LTD.

B.C. 5.6.2

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894 Effective: January 1, 2000

5606 REPAIR CLAMPS FABRICATED STAINLESS STEEL PRODUCT INFORMATION

ROBAR

SERIES 302 STANDARD SIZES: 2" to 8" Nominal pipe OD with standard lengths from 4" to 12". APPLICATIONS: ROBAR 5606 Single Section Repair Clamps are used to repair small holes or breaks in water mains.

MATERIAL SPECIFICATION: Shell: T304 Stainless Steel - fully ivated*. Armor: T304 Stainless Steel - fully ivated*. Sidebar: T304 Stainless Steel - fully ivated*. Gasket: SBR (Buna S) Rubber, (AWWA C111). Fasteners: 1/2" NC T304 Stainless Steel.

NOMINAL WORKING PIPE RANGE SIZE LOW HIGH* 2.12 2.25 2.37 2.63 2.87 3.25 3.50 3.74 4.45 4.75 6.58 6.85 8.58 9.00

2

3

HOW TO ORDER: Determine the product number (5606), high limit of range (see table right) and length of clamp and then order by using appropriate ordering code as shown in the following example.

4 6 8

For a 12" long clamp on a pipe with an OD of between (6.85" - 7.10"), the ordering code is: 5606 7.10" product number

high limit of range

2.37 2.50 2.62 2.88 3.12 3.50 3.75 3.99 4.70 5.00 6.83 7.10 8.83 9.25

APPROX. SHIPPING WEIGHT (LBS.) CLAMP WIDTH (Common Sizes) 4" 6" 8" 12"

1.0 lbs

1.8 lbs

2.0 lbs

3.1 lbs

1.5 lbs

2.5 lbs

3.0 lbs

4.5 lbs

1.8 lbs

3.0 lbs

4.5 lbs

5.3 lbs

2.5 lbs

3.8 lbs

5.0 lbs

7.5 lbs

2.8 lbs

4.5 lbs

5.5 lbs

8.3 lbs

All dimensions are in inches

x

12" clamp width

i.e. 5606 - 7.10 x 12

Note:

* •

"ivated" refers to chemically treating Stainless Steel after welding to return it to its original high corrosion resistance and appearance. Prices for special designs, lengths or diameters may be obtained from the factory on request.

ROBAR INDUSTRIES LTD.

B.C. 5.6.2

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894 Effective: January 1, 2000

SECTION 6 - CONTENTS TAPPING SLEEVES

ROBAR

TAPPING SLEEVES 6404

Cast Tapping Sleeves (Enamel Coated)

6.1.1

6506

Cast Tapping Sleeves (Epoxy Coated)

6.1.1

6606

Stainless Steel Tapping Sleeves

6.2.1

6626

Stainless Steel Outlet Sleeves

6.3.1

6808

Mild Steel Tapping Sleeves (Enamel Coated)

6.4.1

6906

Mild Steel Tapping Sleeves (Epoxy Coated)

6.4.1

6828

Mild Steel Tapping Sleeves (Enamel Coated)

6.5.1

6926

Mild Steel Tapping Sleeves (Epoxy Coated)

6.5.1

ROBAR INDUSTRIES LTD.

B.C.

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: January 1, 2000

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

6.0.1

6404 & 6506 TAPPING SLEEVES CAST DUCTILE IRON PRODUCT INFORMATION

ROBAR

SIZES AVAILABLE: • 4" to 8" Nominal Pipe OD on main supply line. • 4" to 8" Nominal Pipe OD on branch line. APPLICATIONS: ROBAR 6404 & 6506 Tapping Sleeves are used to make a branch outlet off a main supply line. The outside diameters of Ductile Iron and Cast Iron are within the working range of this tapping sleeve.

MATERIAL SPECIFICATION: Body: Cast Ductile Iron (ASTM A536). Flange: Cast Ductile Iron (ASTM A536), 150 lb. Drilling. Gasket: NBR (Buna N) Rubber (ASTM D2000). Fasteners: 6404: 3/4" NC Cast Ductile bolts, (ASTM A536). 6506: 3/4" NC T304 Stainless Steel. Test Plug: 3/4" NPT Mild Steel. Coatings: 6404: Two coats of Enamel. 6506: Corrosion Protective Epoxy coating, (AWWA C213-79). HOW TO ORDER: Determine the product number (6404 or 6506), nominal main size, nominal outlet size and actual main OD, and then order by using the appropriate ordering code (see page 6.1.2) as shown in the following example. If an Epoxy coated Tapping sleeve with Stainless Steel fasteners is required to install a 6" outlet on an 8" Ductile Iron water pipe (9.05" OD), the ordering code is: 6506 8" x 6" 9.05" product number

nom. main size

nom. outlet size

actual main OD

i.e. 6506 - 8 x 6 - 9.05

Note:

•

Not recommended for use on C900 pipe or Asbestos Cement pipe.

ROBAR INDUSTRIES LTD.

B.C.

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: January 1, 2000

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

6.1.1

6404 & 6506 TAPPING SLEEVES CAST DUCTILE IRON PRODUCT INFORMATION

ROBAR

NOMINAL PIPE SIZE 4x4 6x4 6x6 8x4 8x6 8x8

WORKING RANGE 4.74 6.86 6.86 8.99 8.99 8.99 -

ORDERING CODE*

APPROXIMATE SHIPPING WEIGHT (LBS.) (KG.) PN - 4" x 4" x OD 39 17.1 PN - 6" x 4" x OD 45 20.4 PN - 6" x 6" x OD 51 23.1 PN - 8" x 4" x OD 64 29.0 PN - 8" x 6" x OD 68 30.9 PN - 8" x 8" x OD 80 36.4 All dimensions are in inches

5.10 7.10 7.10 9.30 9.30 9.30

C

D

'O' RING GASKET 3/8" NBR

B

GASKET

3/4" TEST PLUG GASKET

MAIN PIPE OD

A

TAPPING SLEEVE DATA NOMINAL SIZE

OUTLET SIZE

4 6

4 4 6 4 6 8

8

Note:

* •

A SLEEVE LENGTH 8 8 1/2 8 1/2 9 /12 9 /12 9 /12

B FLANGE HEIGHT 3 5/8 3 5/8 3 5/8 3 3/4 3 3/4 3 3/4

D NUMBER BOLT BRANCH OF SIZE ID BOLTS 4 3/8 6 3/4 4 3/8 6 3/4 6 3/8 6 3/4 4 3/8 6 3/4 6 3/8 6 3/4 8 3/8 6 3/4 All dimensions are in inches

PN stands for the Product Number (6404, 6506). 6404 and 6506 Tapping Sleeves for 10" and 12" Nominal sized pipes are currently being developed. Please ROBAR.

ROBAR INDUSTRIES LTD.

B.C.

C SPIGOT OD 5 1/32 5 1/32 7 1/32 5 1/32 7 1/32 9 1/32

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: January 1, 2000

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

6.1.2

6606 TAPPING SLEEVES STAINLESS STEEL PRODUCT INFORMATION

ROBAR

STANDARD SIZES AVAILABLE: • 4" to 24" Nominal Pipe OD on main supply line. For other sizes ROBAR. • 4" to 12" Nominal Pipe OD on branch line. APPLICATIONS: ROBAR 6606 Tapping Sleeves are used for "WET" or "HOT" tapping. Available for pipe diameters from 4.80" to 21.60". Outlet options include size on size for 4", 6", 8", 10" and 12" nominal pipe.

MATERIAL SPECIFICATION: Shell: T304 Stainless Steel, fully ivated*. Fasteners: 5/8" NC T304 Stainless Steel. Gaskets: Ringseal: NBR (Buna N) Rubber, (AWWA C111). Liner: SBR (Buna S) Rubber, (AWWA C111). Test Plug: 3/4" NPT Stainless Steel (WWP 460B). Flange: ASTM A743-70 Grade CF-8 (T304), fully ivated*, 150 lb. Drilling Outlet Pipe: T304 Stainless Steel, fully ivated*. HOW TO ORDER: Determine the product number (6606), nominal main size, nominal outlet size, high limit number (see page 6.2.2, 6.2.3), and then order using the appropriate ordering code as shown in the following example. If a Stainless Steel Tapping Sleeve, with a 6" nominal outlet is required for a 12" nominal diameter Ductile Iron pipe (13.20" OD), the ordering code is: 6606 12" x 6" 13.40" product number

nom. main size

nom. outlet size

high end of range

i.e. 6606 - 12 x 6 - 13.40

Note:

* •

"ivated" refers to chemically treating Stainless Steel after welding to return it to its original high corrosion resistance and appearance. Designed for use with undersized cutters only.

ROBAR INDUSTRIES LTD.

B.C.

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: January 1, 2000

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

6.2.1

6606 TAPPING SLEEVES STAINLESS STEEL PRODUCT INFORMATION

ROBAR

STANDARD SIZES NOMINAL BY PIPE X SIZE 4

X

OUTLET SIZE 3 4 3

6

X

6

X

6

8

X

3 4 6

8

X

8

10

12

14

16

X

X

X

X

4

3 4 6 8 10** 3 4 6 8 10 12** 3 4 6 8 10 12 3 4 6 8 10 12

WORKING RANGE LOW HIGH* 4.70 4.95 6.40 6.80 7.20

4.95 5.20 6.80 7.20 7.60

6.75 7.00 7.25 8.40 8.80 9.20 8.95 9.25 10.55 10.90 11.30 11.90

7.00 7.25 7.50 8.80 9.20 9.60 9.20 9.50 10.95 11.30 11.70 12.30

12.15 12.55 13.00 13.40 13.80

12.55 12.95 13.40 13.80 14.20

15.10 15.50 15.80 16.20

15.50 15.90 16.20 16.80

17.20 17.40 17.80 18.40 18.80

17.60 17.80 18.20 18.80 19.20

APPROXIMATE SHIPPING WEIGHT (LBS.) (KG.)

FITTING LENGTH

NUMBER OF BOLTS

12 12

8 8

33 36

15.0 16.4

12

8

36

16.4

12

8

39

17.7

16

10

43

19.6

12 12 16

8 8 10

40 43 47

18.2 19.6 21.4

20

14

64

29.1

12 12 16 20 20 12 12 16 20 20 24 12 12 16 20 20 24 12 12 16 20 20 24

8 8 10 14 12 8 8 10 14 14 16 8 8 10 12 14 16 8 8 10 14 14 16

43 46 50 68 73 46 49 53 72 77 111 67 70 74 93 98 132 71 75 79 100 105 141

19.6 20.9 22.7 30.9 33.2 20.9 22.3 24.1 32.7 35.0 50.5 30.5 31.8 33.6 42.3 44.6 60.0 32.3 34.1 35.9 45.5 47.7 64.1

All dimensions are in inches

Continued... Note:

* ** •

The high limit of the range is used in the ordering code. factory for availability. For sizes not listed above, call ROBAR for availablity.

ROBAR INDUSTRIES LTD. B.C.

Phone

(604) 591-8811

LES PRODUITS INDUSTRIELS ROBAR INC. QUEBEC

Phone

1-800-663-6553 Fax

6.2.2

(604) 591-5288

(450) 641-9525

1-800-315-9525 Fax

(450) 641-4894 Effective: January 1, 2000

6606 TAPPING SLEEVES STAINLESS STEEL PRODUCT INFORMATION

ROBAR

STANDARD SIZES NOMINAL BY PIPE X SIZE

18

20

24

X

X

X

OUTLET SIZE 3 4 6 8 10 12 3 4 6 8 10 12 3 4 6 8 10 12

WORKING RANGE LOW HIGH* 19.30 19.80 20.20

19.70 20.20 20.60

21.40 22.00 22.60

21.80 22.40 23.00

23.20 23.80 25.60

23.60 24.20 26.00

FITTING LENGTH

NUMBER OF BOLTS

12 12 16 20 20 24 12 12 16 20 20 24 12 12 16 20 20 24

12 12 15 21 21 24 12 12 15 21 21 24 12 12 15 21 21 24

APPROXIMATE SHIPPING WEIGHT (LBS.) (KG.) 74 77 81 103 108 144 84 87 91 115 120 158 90 93 97 121 127 167

33.6 35.0 36.8 46.8 49.1 65.5 38.2 39.6 41.4 52.3 54.6 71.8 40.9 42.3 44.1 55.0 57.7 75.9

All dimensions are in inches

HOW TO ORDER: Determine the product number (6606), nominal main size, nominal outlet size, high limit number (see page 6.2.2, 6.2.3), and then order using the appropriate ordering code as shown in the following example. If a Stainless Steel Tapping Sleeve, with a 6" nominal outlet is required for a 12" nominal diameter Ductile Iron pipe (13.20" OD), the ordering code is: 6606 12" x 6" 13.40" product number

nom. main size

nom. outlet size

high end of range

i.e. 6606 - 12 x 6 - 13.40

Note:

* •

The high limit of the range is used in the ordering code. For sizes not listed above, call ROBAR for availability.

ROBAR INDUSTRIES LTD. B.C.

Phone

(604) 591-8811

LES PRODUITS INDUSTRIELS ROBAR INC. QUEBEC

Phone

1-800-663-6553 Fax Effective: January 1, 2000

(604) 591-5288

(450) 641-9525

1-800-315-9525 Fax

(450) 641-4894

6.2.3

6606 TAPPING SLEEVES FABRICATED STAINLESS STEEL PRODUCT INFORMATION

ROBAR

C

D

3/4" TEST PLUG B

GASKET GASKET

MAIN PIPE OD

A

TAPPING SLEEVE DATA NOMINAL OUTLET SIZE 4 6 8 10 12

A

B

12 16 20 20 24

4 4 1/2 5 5 1/2 5 3/4

ROBAR INDUSTRIES LTD.

B.C.

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: January 1, 2000

C (DIA.) 5 1/32 7 1/32 9 1/32 11 1/32 13 1/32

D BOLT BOLT (DIA.) QTY. SIZE 4 1/2 8 5/8 6 1/2 10 5/8 8 1/2 14 5/8 10 7/16 14 5/8 12 7/16 16 5/8 All dimensions are in inches

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

6.2.4

6626 OUTLET SLEEVES FABRICATED STAINLESS STEEL PRODUCT INFORMATION

ROBAR

SIZES AVAILABLE: • 4" to 24" Nominal Pipe OD on main supply line. For other sizes ROBAR. • 2" to 12" Nominal Pipe OD on branch line. APPLICATIONS: ROBAR 6626 Outlet Sleeves are used for "DRY TAP" applications. Outlet options are 3" through 16" including size on size for 6" and 8". Particularly suited for use on high density polyethylene.

MATERIAL SPECIFICATION: Shell: T304 Stainless Steel fully ivated*. Fasteners: 5/8" NC T304 Stainless Steel, rolled threads. Gaskets: Ringseal: NBR (Buna N) Rubber (AWWA C111). Liner: SBR (Buna S) Rubber (AWWA C111). Flange: 4" - 6" T304 Stainless Steel, 150 lb. Drilling. 8" - 12" ASTM A-7 Mild Steel Plate with Corrosion Protective Epoxy coating, 150 lb. Drilling (Option: T304 Stainless Steel). Outlet: T304 Stainless Steel fully ivated*. HOW TO ORDER: Determine the product number (6626), nominal main size, nominal outlet size and the high limit number (see page 6.3.2, 6.3.3) and then order by using the appropriate ordering code as shown in the following example. If a Stainless Steel Outlet Sleeve, with a 6" nominal outlet is required for a 12" nominal diameter HDPE pipe (12.75" OD), the ordering code is: 6626 12" x 6" 12.95" product number

nom. main size

nom. outlet size

high end of range

i.e. 6626 - 12 x 6 x 12.95

Note:

* •

"ivated" refers to chemically treating Stainless Steel after welding to return it to its original high corrosion resistance and appearance. Designed for use with undersized cutters only.

ROBAR INDUSTRIES LTD.

B.C.

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: January 1, 2000

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

6.3.1

6626 OUTLET SLEEVES STAINLESS STEEL PRODUCT INFORMATION

ROBAR

STANDARD SIZES NOMINAL BY PIPE X SIZE 4

6

X

OUTLET SIZE

WORKING RANGE LOW HIGH* 4.95 5.20

12

8

33

15.0

12

8

36

16.4

3

6.40 6.80 7.20

6.80 7.20 7.60

12

8

36

16.4

12

8

39

17.7

7.00 7.25 8.40 8.80 9.20 8.95 9.25 10.55 10.90 11.30 11.90

7.25 7.50 8.80 9.20 9.60 9.20 9.50 10.95 11.30 11.70 12.30

16

10

43

19.6

12 12 16

8 8 10

40 43 47

18.2 19.6 21.4

20

14

64

29.1

12.15 12.55 13.00 13.40 13.80

12.55 12.95 13.40 13.80 14.20

15.10 15.50 15.80 16.20

15.50 15.90 16.20 16.80

17.20 17.40 17.80 18.40 18.80

17.60 17.80 18.20 18.80 19.20

12 12 16 20 20 12 12 16 20 20 24 12 12 16 20 20 24 12 12 16 20 20 24

8 8 10 14 14 8 8 10 14 14 16 8 8 10 14 14 16 8 8 10 14 14 16

43 46 50 68 73 46 49 53 72 77 111 67 70 74 93 98 132 71 75 79 100 105 141

19.6 20.9 22.7 30.9 33.2 20.9 22.3 24.1 32.7 35.0 50.5 30.5 31.8 33.6 42.3 44.6 60.0 32.3 34.1 35.9 45.5 47.7 64.1

6x6

X

6

8

X

3 4 6

8x8

X

8

12

14

16

X

X

X

APPROXIMATE SHIPPING WEIGHT (LBS.) (KG.)

4.70 4.95

X

X

NUMBER OF BOLTS

3 4

4

10

FITTING LENGTH

3 4 6 8 10** 3 4 6 8 10 12** 3 4 6 8 10 12 3 4 6 8 10 12

All dimensions are in inches

Continued . . .

Note:

* ** •

The high limit of the range is used in the ordering code. Check with the factory for size on size availability. For sizes not listed above, call ROBAR for availability.

ROBAR INDUSTRIES LTD. B.C.

Phone

(604) 591-8811

LES PRODUITS INDUSTRIELS ROBAR INC. QUEBEC

Phone

1-800-663-6553 Fax

6.3.2

(604) 591-5288

(450) 641-9525

1-800-315-9525 Fax

(450) 641-4894 Effective: January 1, 2000

6626 OUTLET SLEEVES STAINLESS STEEL PRODUCT INFORMATION

ROBAR

STANDARD SIZES NOMINAL BY PIPE X SIZE

18

20

24

X

X

X

OUTLET SIZE

WORKING RANGE LOW

FITTING LENGTH

NUMBER OF BOLTS

APPROXIMATE SHIPPING WEIGHT

HIGH

(LBS.)

(KG.)

3

19.30 19.70

12

12

74

33.6

4

19.80 20.20

12

12

77

35.0

6

20.20 20.60

16

15

81

36.8

8

20

21

103

46.8

10

20

21

108

49.1

12

24

24

144

65.5

3

21.40 21.80

12

12

84

38.2

4

22.00 22.40

12

12

87

39.6

6

22.60 23.00

16

15

91

41.4

8

20

21

115

52.3

10

20

21

120

54.6

12

24

24

158

71.8

3

23.20 23.60

12

12

90

40.9

4

23.80 24.20

12

12

93

42.3

6

25.60 26.00

16

15

97

44.1

8

20

21

121

55.0

10

20

21

127

57.7

12

24

24

167

75.9

All dimensions are in inches

HOW TO ORDER: Determine the product number (6626), nominal main size, nominal outlet size and the high limit number (see page 6.3.2, 6.3.3) and then order by using the appropriate ordering code as shown in the following example. If a Stainless Steel Outlet Sleeve, with a 6" nominal outlet is required for a 12" nominal diameter HDPE pipe (12.75" OD), the ordering code is: 6626 12" x 6" 12.95" product number

nom. main size

nom. outlet size

high end of range

i.e. 6626 - 12 x 6 x 12.95

Note:

* •

The high limit of the range is used in the ordering code. For sizes other than those listed above, call ROBAR for availability

ROBAR INDUSTRIES LTD. B.C.

Phone

(604) 591-8811

LES PRODUITS INDUSTRIELS ROBAR INC. QUEBEC

Phone

1-800-663-6553 Fax Effective: January 1, 2000

(604) 591-5288

(450) 641-9525

1-800-315-9525 Fax

(450) 641-4894

6.3.3

6626 OUTLET SLEEVES FABRICATED STAINLESS STEEL PRODUCT INFORMATION

ROBAR

C D VSF BACKING FLANGE 150# EPOXY COATED B

GASKET

GASKET

MAIN PIPE OD

A

OUTLET SLEEVE DATA NOMINAL OUTLET SIZE 3 4 6 8 10 12 14 16 18 20

A

B

12 12 16 20 20 24 28 32 36 40

4.00 4.00 4.50 5.00 5.50 5.75 7.13 7.75 8.25 8.50

ROBAR INDUSTRIES LTD.

B.C.

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: January 1, 2000

C (DIA.) 3.25 4.25 6.25 8.25 10.25 12.25 14.25 16.25 18.25 20.25

D BOLT BOLT (DIA.) QTY. SIZE 3.00 5/8 4.00 8 5/8 6.00 10 5/8 8.00 14 5/8 10.00 14 5/8 12.00 16 5/8 14.00 18 5/8 16.00 20 5/8 18.00 24 5/8 20.00 28 5/8 All dimensions are in inches

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

6.3.4

6808 & 6906 TAPPING SLEEVES FABRICATED MILD STEEL PRODUCT INFORMATION

ROBAR

SIZES AVAILABLE: • 8" to 24" Nominal Pipe OD on main supply line. • 4" to 12" Nominal Pipe OD on branch line. Sizes not listed may be ordered by ing ROBAR. APPLICATIONS: ROBAR 6808 and 6906 Tapping Sleeves are used to make a branch outlet off a main supply line on Steel, Ductile Iron, Cast Iron and Asbestos Cement pipe.

MATERIAL SPECIFICATION: Body: Shell: Mild Steel 3/8" Plate (ASTM A36). Outlet Pipe: Schedule 40 Mild Steel (ASTM A53) or equivalent. Flange: Forged Steel, drilled and faced per ASA 150 lb. standards. Flat face recessed for tapping valve, per MSS standard SP-60. Options available. Fasteners: 6808: 3/4" NC HSLA, (AWWA C111). 6906: T304 Stainless Steel, 3/4" N.C. Gasket: NBR (Buna N) Rubber, (AWWA C111). Test Plug: Mild Steel 3/4" NPT. Coatings: 6808: Enamel coated. 6906: Corrosion Protective Epoxy coating (AWWA 213-79) . CONFIGURATIONS: 6808: Enamel coated with Mild Steel fasteners. 6806: Enamel coated with T304 Stainless Steel fasteners. 6906: Epoxy coated with T304 Stainless Steel fasteners. HOW TO ORDER: Determine the product number (6808 or 6906), nominal main size, nominal outlet size and the high limit number (see page 6.4.3) and then order using the appropriate ordering code as shown in the following example. If an Enamel coated mild steel tapping sleeve is required to install a 12" outlet on a 16" Ductile Iron pipe (17.40" OD), the ordering code is: 6808 16" x 12" 17.85" product number

nom. main size

nom. outlet size

actual main OD

i.e. 6808 - 16 x 12 - 1785

ROBAR INDUSTRIES LTD. B.C.

Phone

(604) 591-8811

LES PRODUITS INDUSTRIELS ROBAR INC. QUEBEC

Phone

1-800-663-6553 Fax Effective: January 1, 2000

(604) 591-5288

(450) 641-9525

1-800-315-9525 Fax

(450) 641-4894

6.4.1

6808 & 6906 TAPPING SLEEVES FABRICATED MILD STEEL PRODUCT INFORMATION

ROBAR

C

D

3/4" TEST PLUG B

5/16"

GASKET GASKET

MAIN PIPE OD

OVERALL DIMENSION PIPE O.D. + 6"

A

TAPPING SLEEVE DATA NOMINAL OUTLET SIZE 4

A

B

12

6

12

8

16

10 12

5.19

C (DIA) 5.06

D (DIA.) 4.0

BOLT QTY 6

BOLT SIZE 3/4

5.63

7.06

6.0

6

3/4

6.00

9.06

8.0

8

3/4

20

6.50

11.06

10.0

10

3/4

20

6.75

13.06

12.0

10

3/4

All dimensions are in inches

ROBAR INDUSTRIES LTD.

B.C.

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: January 1, 2000

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

6.4.2

6808 & 6906 TAPPING SLEEVES FABRICATED MILD STEEL PRODUCT INFORMATION

ROBAR

NOMINAL PIPE SIZE

BY X

8**

X

10**

12**

* ** *** •

X

14

X

16

X

18

X

20 - 22

X

24

Note:

X

X

OUTLET SIZE

WORKING RANGE LOW HIGH*

APPROXIMATE SHIPPING WEIGHT (LBS.) (KG.)

4 6 8

8.50 8.90 9.30

8.90 9.30 9.70

65 80 90

29 36 41

4 6 8 10***

9.70 10.10 10.50 10.90 11.30 11.70 12.10 12.50 12.90 13.30

10.10 10.50 10.90 11.30 11.70 12.10 12.50 12.90 13 30 13.60

13.60 14.05 14.50 14.95 15.30 15.75 16.15 16.60 17.05 17.40 17.85 18.30 18.75 19.20 19.50 19.90 20.40 20.90 21.40 21.90 22.15 22.70 23.60 24.15 24.70 25.25 25.80

14.05 14.50 14.95 15.40 15.75 16.15 16.60 17.05 17.50 17.85 18.30 18.75 19.20 19.65 19.95 20.40 20.90 21.40 21.90 22.15 22.70 23.25 24.15 24.70 25.25 25.80 26.35

68 70 92 118 118 118 92 114 140 190 215 215 102 124 150 200 225 114 136 162 212 132 154 180 230 255 137 159 185 235 260 260 260 167 189 215 265 290

31 32 42 54 54 54 42 52 64 86 98 46 56 68 91 102 52 62 74 96 108 60 70 82 105 116 62 72 84 107 118 118 118 76 86 98 120 132

4 6 8 10 12*** 4 6 8 10 12 4 6 8 10 12 4 6 8 10 12 4 6 8 10 12

4 6 8 10 12

All dimensions are in inches

The high limit of the range is used in the ordering code. When ordering size on size Tapping Sleeves, actual pipe OD is required. Size on size for steel size is unavailable. Size on size taps require a 1/2" undersized shell cutter. Other working ranges are available on request.

ROBAR INDUSTRIES LTD. B.C.

Phone

(604) 591-8811

LES PRODUITS INDUSTRIELS ROBAR INC. QUEBEC

Phone

1-800-663-6553 Fax Effective: January 1, 2000

(604) 591-5288

(450) 641-9525

1-800-315-9525 Fax

(450) 641-4894

6.4.3

6828 & 6926 TAPPING SLEEVES FABRICATED MILD STEEL PRODUCT INFORMATION

ROBAR

ROBAR

SERIES 428

BAKER

SIZES AVAILABLE: 4" to 30" Nominal Pipe OD on main supply line 4" to 12" Nominal OD on branch line. Sizes not listed may be ordered by ing ROBAR. APPLICATIONS: 6828 and 6926 Tapping Sleeves are used to make a branch outlet off a main supply line on Steel, Ductile Iron, Cast Iron and Asbestos Cement pipe.

MATERIAL SPECIFICATION (6828): Body: Carbon Steel plate (ASTM A-36). Flange: Drilled and faced per ASA 150 lb. standards. Flat face recessed for tapping valve, per MSS standard SP-60. 300 lb. drilling available. Gaskets: NBR (Buna N) Rubber; (AWWA C111). Fasteners: 3/4" NC Low alloy (AWWA C111). Coating: Two coats of Enamel. OTHER CONFIGURATIONS: 6826: Enamel coated body with T304 Stainless Steel fasteners. 6926: Epoxy coated body, T304 Stainless Steel fasteners. HOW TO ORDER: Determine the product number (6828 or 6926), the nominal main size, the nominal outlet size and the actual main pipe OD, and then use the appropriate ordering code as shown in the following example. For a 16" Asbestos-Cement Class 150 (18.72" OD) main, with an 8" branch in a corrosive ground condition (i.e. Epoxy coated with Stainless Steel bolts) where maximum service life is desired, the ordering code is: 6926 product number

-

16"

x

nom. main size

8"

x

nom. outlet size

18.72" actual main OD

i.e. 6926 - 16 x 8 - 18.72

Note:

•

Flange outlets 14" and larger are designed to fit specific tapping valves of various manufacturers. Specify valve manufacturer when ordering branches 14" and larger.

ROBAR INDUSTRIES LTD.

B.C.

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: January 1, 2000

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

6.5.1

6828 & 6926 TAPPING SLEEVES FABRICATED MILD STEEL PRODUCT INFORMATION

ROBAR

ROBAR

BAKER

C

D

3/4" TEST PLUG B

5/16"

GASKET GASKET

MAIN PIPE OD

OVERALL DIMENSION PIPE O.D. + 6"

A

TAPPING SLEEVE DATA NOMINAL OUTLET SIZE 4 6 8 10 12 14 16 18 20

Note:

•

A

B

12 12 16 20 20 24 28 32 36

5.25 5.63 6.00 6.50 6.75 7.13 7.75 8.25 8.50

D (DIA.) 4.50 6.50 8.50 10.44 12.44

BOLT BOLT QTY. SIZE 6 3/4 6 3/4 8 3/4 10 3/4 10 3/4 12 3/4 See Note 14 3/4 16 3/4 18 3/4 All dimensions are in inches

Flange outlets 14" and larger are designed to fit specific tapping valves of the various manufacturers. Specify valve manufacturer when ordering branches of 14" or larger.

ROBAR INDUSTRIES LTD.

B.C.

C (DIA.) 5.03 7.03 9.03 11.03 13.03

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: January 1, 2000

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

6.5.2

6828 & 6926 TAPPING SLEEVES FABRICATED MILD STEEL PRODUCT INFORMATION

ROBAR

ROBAR

BAKER

MAIN X OUTLET (NOM.) 6x4 8x4 8x6 10 x 4 10 x 6 10 x 8 12 x 4 12 x 6 12 x 8 12 x 10 14 x 4 14 x 6 14 x 8 14 x 10 14 x 12 16 x 4 16 x 6 16 x 8 16 x 10 16 x 12 18 x 4 18 x 6 18 x 8 18 x 10 18 x 12 20 x 4 20 x 6 20 x 8 20 x 10 20 x 12 24 x 4 24 x 6 24 x 8 24 x 10 24 x 12 30 x 4 30 x 4 30 x 4 30 x 6 30 x 6 30 x 6

PRICING RANGE* 6.83 8.98 8.98 11.03 11.03 11.03 13.13 13.13 13.13 13.13 15.23 15.23 15.23 15.23 15.23 17.33 17.33 17.33 17.33 17.33 19.41 19.41 19.41 19.41 19.41 21.51 21.51 21.51 21.51 21.51 25.71 25.71 25.71 25.71 25.71 29.78 30.48 31.52 29.78 30.48 34.52 -

7.72 10.09 10.09 12.35 12.35 12.35 14.58 14.58 14.58 14.58 17.26 17.26 17.26 17.26 17.26 19.45 19.45 19.45 19.45 19.45 22.81 22.81 22.81 22.81 22.81 22.52 25.52 25.52 25.52 25.52 30.48 30.48 30.48 30.48 30.48 30.48 31.18 32.22 30.48 31.18 32.22

ORDERING CODE FOR ENAMEL COAT & ALLOY BOLTS 6828 - 4 - OD 6828 - 4 - OD 6828 - 6 - OD 6828 - 4 - OD 6828 - 6 - OD 6828 - 8 - OD 6828 - 4 - OD 6828 - 6 - OD 6828 - 8 - OD 6828 - 10 - OD 6828 - 4 - OD 6828 - 6 - OD 6828 - 8 - OD 6828 - 10 - OD 6828 - 12 - OD 6828 - 4 - OD 6828 - 6 - OD 6828 - 8 - OD 6828 - 10 - OD 6828 - 12 - OD 6828 - 4 - OD 6828 - 6 - OD 6828 - 8 - OD 6828 - 10 - OD 6828 - 12 - OD 6828 - 4 - OD 6828 - 6 - OD 6828 - 8 - OD 6828 - 10 - OD 6828 - 12 - OD 6828 - 4 - OD 6828 - 6 - OD 6828 - 8 - OD 6828 - 10 - OD 6828 - 12 - OD 6828 - 4 - 30.00 6828 - 6 - 30.75 6828 - 8 - 32.00 6828 - 4 - 30.00 6828 - 6 - 30.75 6828 - 8 - 32.00

ORDERING CODE APPROXIMATE FOR EPOXY COAT SHIPPING WEIGHT & SS BOLTS (LBS.) (KG.) 6926 - 4 - OD 71 32.3 6926 - 4 - OD 78 35.5 6926 - 6 - OD 87 39.5 6926 - 4 - OD 85 38.6 6926 - 6 - OD 94 42.7 6926 - 8 - OD 131 59.5 6926 - 4 - OD 94 42.7 6926 - 6 - OD 103 46.8 6926 - 8 - OD 144 65.5 6926 - 10 - OD 192 87.3 6926 - 4 - OD 100 45.5 6926 - 6 - OD 111 50.5 6926 - 8 - OD 153 69.5 6926 - 10 - OD 204 92.7 6926 - 12 - OD 229 104.1 6926 - 4 - OD 107 48.6 6926 - 6 - OD 117 53.2 6926 - 8 - OD 162 73.6 6926 - 10 - OD 216 98.2 6926 - 12 - OD 240 109.1 6926 - 4 - OD 120 54.5 6926 - 6 - OD 130 59.1 6926 - 8 - OD 180 81.8 6926 - 10 - OD 327 148.6 6926 - 12 - OD 262 119.1 6926 - 4 - OD 133 60.5 6926 - 6 - OD 144 65.5 6926 - 8 - OD 197 89.5 6926 - 10 - OD 258 117.3 6926 - 12 - OD 284 129.1 6926 - 4 - OD 149 67.7 6926 - 6 - OD 157 71.4 6926 - 8 - OD 219 99.5 6926 - 10 - OD 286 130.0 6926 - 12 - OD 304 138.2 6926 - 4 - 30.00 156 70.9 6926 - 4 - 30.75 156 70.9 6926 - 4 - 32.00 156 70.9 6926 - 6 - 30.00 160 72.7 6926 - 6 - 30.75 160 72.7 6926 - 6 - 32.00 160 72.7 All dimensions are in inches

Continued . . . Note:

* •

This is not the working range. For larger sizes not listed ROBAR. Flange Outlets 14" and larger are designed to fit specific valves. Specify valve manufacturer for quotations on branches 14" and larger.

ROBAR INDUSTRIES LTD.

B.C.

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: January 1, 2000

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

6.5.3

6828 & 6926 TAPPING SLEEVES FABRICATED MILD STEEL PRODUCT INFORMATION

ROBAR

ROBAR

BAKER

MAIN X OUTLET (NOM) 30 x 8 30 x 8 30 x 8 30 x 10 30 x 10 30 x 10 30 x 12 30 x 12 30 x 12

PRICING RANGE* 29.78 30.48 31.52 29.78 30.48 31.52 29.78 30.48 31.52 -

30.48 31.18 32.22 30.48 31.18 32.22 30.48 31.18 32.22

ORDERING CODE FOR ENAMEL COAT & ALLOY BOLTS 6828 - 8 - 30.00 6828 - 8 - 30.75 6828 - 8 - 32.00 6828 - 10 - 30.00 6828 - 10 - 30.75 6828 - 10 - 32.00 6828 - 12 - 30.00 6828 - 12 - 30.75 6828 - 12 - 32.00

ORDERING CODE FOR EPOXY COAT & SS BOLTS 6926 - 8 - 30.00 6926 - 8 - 30.75 6926 - 8 - 32.00 6926 - 10 - 30.00 6926 - 10 - 30.75 6926 - 10 - 32.00 6926 - 12 - 30.00 6926 - 12 - 30.75 6926 - 12 - 32.00

APPROXIMATE SHIPPING WEIGHT (LBS.) (KG.) 219 99.5 219 99.5 219 99.5 292 132.7 292 132.7 292 132.7 315 143.2 315 143.2 315 143.2

SIZE-ON-SIZE TAPPING SLEEVES REQUIRE 1/2" UNDERSIZE SHELL CUTTER 4x4 4x4 4x4 6x6 6x6 6x6 6x6 8x8 8x8 8x8 8x8 8x8 10 x 10 10 x 10 10 x 10 10 x 10 12 x 12 12 x 12 12 x 12 12 x 12

Note:

* •

4.40 4.74 5.10 6.57 6.83 7.20 7.40 8.36 8.73 8.98 9.27 9.68 10.45 11.03 11.36 11.76 12.42 13.13 13.60 13.60 -

4.60 5.10 5.30 6.73 7.16 7.60 7.73 8.75 9.12 9.37 9.69 9.68 10.45 11.03 11.36 11.76 12.42 13.13 13.60 13.60

6828 - 4 - 4.50 6828 - 4 - 4.80 6828 - 4 - 5.25 6828 - 6 - 6.63 6828 - 6 - 6.90 6828 - 6 - 7.20 6828 - 6 - 7.45 6828 - 8 - 8.63 6828 - 8 - 8.80 6828 - 8 - 9.05 6828 - 8 - 9.40 6828 - 8 - 10.00 6828 - 10 - 10.75 6828 - 10 - 11.10 6828 - 10 - 11.40 6828 - 10 - 12.00 6828 - 12 - 12.75 6828 - 12 - 13.20 6828 - 12 - 13.82 6828 - 12 - 13.82

This is not the working range. For larger sizes not listed ROBAR. Flange Outlets 14" and larger are designed to fit specific valves. Specify valve manufacturer for quotations on branches 14" and larger.

ROBAR INDUSTRIES LTD.

B.C.

6926 - 4 - 4.50 65 29.5 6926 - 4 - 4.80 65 29.5 6926 - 4 - 5.25 65 29.5 6926 - 6 - 6.63 76 34.5 6926 - 6 - 6.90 76 34.5 6926 - 6 - 7.20 76 34.5 6926 - 6 - 7.45 76 41.2 6926 - 8 - 8.63 92 41.2 6926 - 8 - 8.80 92 41.2 6926 - 8 - 9.05 92 41.2 6926 - 8 - 9.40 92 41.2 6926 - 8 - 10.00 92 41.2 6926 - 10 - 10.75 138 62.7 6926 - 10 - 11.10 138 62.7 6926 - 10 - 11.40 138 62.7 6926 - 10 - 12.00 192 62.7 6926 - 12 - 12.75 201 91.4 6926 - 12 - 13.20 201 91.4 6926 - 12 - 13.82 201 91.4 6926 - 12 - 13.82 201 91.4 All dimensions are in inches

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: January 1, 2000

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

6.5.4

SECTION 7 - CONTENTS FLANGED COUPLING ADAPTERS

ROBAR

FLANGED COUPLING ADAPTERS 7404

Enamel coated, Cast Ductile Iron fasteners

7.1.1

7506

Epoxy coated, Stainless Steel fasteners

7.1.3

7808

Enamel coated, HSLA fasteners

7.2.1

7906

Epoxy coated, Stainless Steel fasteners

7.2.3

ROBAR INDUSTRIES LTD. B.C.

Phone

(604) 591-8811

LES PRODUITS INDUSTRIELS ROBAR INC. QUEBEC

Phone

1-800-663-6553 Fax Effective: January 1, 2000

(604) 591-5288

(450) 641-9525

1-800-315-9525 Fax

(450) 641-4894

7.0.1

7404 FLANGED COUPLING ADAPTERS CAST DUCTILE IRON PRODUCT INFORMATION

ROBAR

SIZES AVAILABLE: 4" to 12" Nominal Pipe OD. For additional sizes see ROBAR 7808 Fabricated Steel Flanged Coupling Adapter (7.2.2) Product Information Sheet. APPLICATIONS: ROBAR 7404 Flanged Coupling Adapters are used to flexibly adapt plain end pipe to flanged end.

MATERIAL SPECIFICATION: Flanged Body: Cast Ductile Iron (ASTM A536), AWWA Class "D", C-207, with ANSI 150 lbs. drilling. End Ring: Cast Ductile Iron (ASTM A536). Gaskets: Flange: NBR (Buna N) Rubber, (AWWA C111). Coupling: SBR (Buna S) Rubber, (AWWA C111). Other compounds available. ROBAR for price and delivery. Fasteners: Cast Ductile Iron (ASTM A536), or Low Alloy Steel (AWWA C111), 5/8" NC. Coating: Two coats of Enamel. Anchor Pins: (as required) HSLA Steel Anchor Pins (AP) for pipe sizes up to 12" (T304 Stainless Steel available). OTHER CONFIGURATIONS: 7406: Enamel coated Body and End Ring, Stainless Steel fasteners. 7506: Epoxy coated Body and End Ring, Stainless Steel fasteners. 7519: Epoxy coated Body, End Ring and bolts - cathodically fitted. HOW TO ORDER: Determine the product number (7404, etc.), nominal pipe OD, the high limit of range (see page 7.1.2) and whether Anchor Pins (AP) are required, and then use the appropriate ordering code as shown in the following example. For a standard FCA required for 6" C900 PVC pipe (6.90" OD), the ordering code is: 7404 6" 7.10" product number

nom. OD

high limit of range

i.e. 7404 - 6 - 7.10

ROBAR INDUSTRIES LTD. B.C.

Phone

(604) 591-8811

LES PRODUITS INDUSTRIELS ROBAR INC. QUEBEC

Phone

1-800-663-6553 Fax Effective: January 1, 2000

(604) 591-5288

(450) 641-9525

1-800-315-9525 Fax

(450) 641-4894

7.1.1

7404 FLANGED COUPLING ADAPTERS CAST DUCTILE IRON PRODUCT INFORMATION

ROBAR

NOMINAL PIPE SIZE

WORKING RANGE PIPE LOW OD HIGH*

APPROXIMATE SHIPPING WEIGHT (LBS.)

(KG.)

(Actual)

4

6

8

10

12

Note:

*

3.45 3.50 3.95 3.75 4.05 4.05 4.35 4.40 4.60 19 8.6 4.74 4.80 5.10 5.10 5.30 5.85 6.00 6.15 6.15 6.45 6.50 6.70 30 13.6 6.86 6.90 7.10 7.15 7.35 7.90 8.00 8.25 8.25 8.55 8.55 8.75 38 17.2 8.99 9.05 9.30 9.30 9.50 10.20 10.50 10.60 10.90 11.10 11.10 11.40 56 25.4 11.55 11.75 11.90 12.10 12.60 12.90 13.20 13.20 13.50 72 32.6 13.80 14.10 14.10 14.35 All dimensions are in inches

The high limit of the range is used in the ordering code.

ROBAR INDUSTRIES LTD.

B.C.

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: January 1, 2000

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

7.1.2

7506 FLANGED COUPLING ADAPTERS CAST DUCTILE IRON PRODUCT INFORMATION

ROBAR

SIZES AVAILABLE: 4" to 12" Nominal Pipe OD. For additional sizes see ROBAR 7906 Fabricated Steel Flanged Coupling Adapter (7.2.2.A) Product Information Sheet. APPLICATIONS: ROBAR 7506 Flanged Coupling Adapters are used to flexibly adapt plain end pipe to flanged end. Used in areas where corrosion is a factor. The 7506 body is Epoxy Coated and Stainless Steel fasteners are supplied.

MATERIAL SPECIFICATION: Flanged Body: Cast Ductile Iron (ASTM A536), AWWA Class "D", C-207, with ANSI 150 lbs. drilling. End Ring: Cast Ductile Iron (ASTM A536). Gaskets: Flange: NBR (Buna N) Rubber, (AWWA C111). Coupling: SBR (Buna S) Rubber, (AWWA C111). Other compounds available. ROBAR for price and delivery. Fasteners: 5/8” NC T304 Stainless Steel (ASTM A743). Coating: Corrosion Protective Epoxy Coating (AWWA C213-79). Anchor Pins: (as required) HSLA Steel Anchor Pins (AP) for pipe sizes up to 12" (T304 Stainless Steel available). OTHER CONFIGURATIONS: 7406: Enamel coated Body and End Ring, Stainless Steel fasteners. 7506: Epoxy coated Body and End Ring, Stainless Steel fasteners. 7519: Epoxy coated Body, End Ring and bolts - cathodically fitted. HOW TO ORDER: Determine the product number (7506, etc.), nominal pipe OD, the high limit of range (see page 7.1.2) and whether Anchor Pins (AP) are required, and then use the appropriate ordering code as shown in the following example. For a standard FCA required for 6" C900 PVC pipe (6.90" OD), the ordering code is: 7506 6" 7.10" product number

nom. OD

high limit of range

i.e. 7506 - 6 - 7.10

ROBAR INDUSTRIES LTD. B.C.

Phone

(604) 591-8811

LES PRODUITS INDUSTRIELS ROBAR INC. QUEBEC

Phone

1-800-663-6553 Fax Effective: January 1, 2000

(604) 591-5288

(450) 641-9525

1-800-315-9525 Fax

(450) 641-4894

7.1.3

7506 FLANGED COUPLING ADAPTERS CAST DUCTILE IRON PRODUCT INFORMATION

ROBAR

NOMINAL PIPE SIZE

WORKING RANGE PIPE LOW OD HIGH*

APPROXIMATE SHIPPING WEIGHT (LBS.)

(KG.)

(Actual)

4

6

8

10

12

3.45 3.50 3.95 3.75 4.05 4.05 4.35 4.40 4.60 4.74 4.80 5.10 5.10 5.30 5.85 6.00 6.15 6.15 6.45 6.50 6.70 6.86 6.90 7.10 7.15 7.35 7.90 8.00 8.25 8.25 8.55 8.55 8.75 8.99 9.05 9.30 9.30 9.50 10.20 10.50 10.60 10.90 11.10 11.10 11.40 11.55 11.75 11.90 12.10 12.60 12.90 13.20 13.20 13.50 13.80 14.10 14.10 14.35

19

8.6

30

13.6

38

17.2

56

25.4

72

32.6

All dimensions are in inches

Note:

*

The high limit of the range is used in the ordering code.

ROBAR INDUSTRIES LTD. B.C.

Phone

(604) 591-8811

LES PRODUITS INDUSTRIELS ROBAR INC. QUEBEC

Phone

1-800-663-6553 Fax

7.1.4

(604) 591-5288

(450) 641-9525

1-800-315-9525 Fax

(450) 641-4894 Effective: January 1, 2000

7808 FLANGED COUPLING ADAPTERS FABRICATED STEEL PRODUCT INFORMATION

ROBAR

ROBAR

SERIES 602

BAKER

STANDARD SIZES: 4" to 30" Nominal Pipe OD. For additional sizes ROBAR for quotation. APPLICATIONS: ROBAR 7808 Flanged Coupling Adapters are used to flexibly adapt plain end pipe to flanged end.

MATERIAL SPECIFICATION: Center Sleeve: Carbon Steel (ASTM A-36). Flange: (AWWA C207 Class D - ANSI 150 lb. drilling), (AWWA Class E or F Flanges available). End Rings: Steel, Malleable or Ductile Iron according to size and requirement. Gaskets: SBR (Buna S) Rubber, (AWWA C111). Fasteners: 5/8" NC HSLA Steel body rolled threads. Heavy Hex nuts are standard. (AWWA C111). Anchor Pins: (as required) HSLA Steel Anchor Pins (AP) for pipe sizes up to 12" (T304 Stainless Steel available). Coating: Two coats of Enamel. OTHER CONFIGURATIONS: 7806: Enamel coated Center Sleeve and End Rings, Stainless Steel fasteners. 7906: Epoxy coated Center Sleeve and End Rings, Stainless Steel fasteners. 7909: Epoxy coated Center Sleeve, End Rings and bolts. HOW TO ORDER: Determine the product number (7808, etc.), nominal flange size, actual pipe OD and whether Anchor Pins (AP) are required,and then use the appropriate ordering code as shown in the following example. To couple a 16" OD Steel pipe to a 16" flanged connection, the ordering code is: 7808 16" 16.00" product number

nom. flange size

actual pipe OD

i.e. 7808 - 16 - 16.00

ROBAR INDUSTRIES LTD. B.C.

Phone

(604) 591-8811

LES PRODUITS INDUSTRIELS ROBAR INC. QUEBEC

Phone

1-800-663-6553 Fax Effective: January 1, 2000

(604) 591-5288

(450) 641-9525

1-800-315-9525 Fax

(450) 641-4894

7.2.1

7808 FLANGED COUPLING ADAPTERS FABRICATED STEEL PRODUCT INFORMATION

ROBAR

ROBAR

BAKER

NOMINAL SIZE NO. BOLTS PIPE AVAILABILITY* (COUPLING) SIZE 4 3.94 - 4.86 3 6 5.94 - 6.96 5 8 7.94 - 9.10 6 10 9.94 - 11.25 7 12 11.94 - 13.29 8 14 13.88 - 15.24 8 16 15.88 - 17.89 10 18 17.88 - 20.01 10 20 19.88 - 22.15 12 24 23.88 - 26.41 14 30 25.88 - 30.09 16

Note:

* ** • • • • •

2 2 4 4-6 6-8

See Note

APPROXIMATE SHIPPING WEIGHT (LBS.) (KG.) 30 13.6 35 15.9 50 22.7 60 27.3 85 38.6 130 59.1 146 66.4 159 72.3 183 83.2 288 130.9 330 150.0 All dimensions are in inches

This is not the coupling range. It is the minimum and maximum of popular sizes. ODs must be specified. If ordered, specify maximum working pressure. For pipe sizes over 12", anchor pins are recommended. Price on application. Submit full pressure and test data. No flange bolts or gaskets supplied. Only popular sizes shown above. All pipe sizes up to 72" and larger are available. Special coatings, gasket, flanges, fastener materials and isolating boots are available. For price and availability of items not shown, ROBAR and specify the pipe and flange sizes to be coupled along with any special requirements.

ROBAR INDUSTRIES LTD.

B.C.

NO. ANCHOR PINS (AP) REQUIRED**

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: January 1, 2000

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

7.2.2

7906 FLANGED COUPLING ADAPTERS FABRICATED STEEL PRODUCT INFORMATION

ROBAR

ROBAR

SERIES 602

BAKER

STANDARD SIZES: 4" to 30" Nominal Pipe OD. For additional sizes ROBAR for quotation. APPLICATIONS: ROBAR 7906 Flanged Coupling Adapters are used to flexibly adapt plain end pipe to flanged end. Used in areas where corrosion is a factor. The 7906 Body is Epoxy Coated and Stainless Steel fasteners are supplied.

MATERIAL SPECIFICATION: Center Sleeve: Carbon Steel (ASTM A-36). Flange: (AWWA C207 Class D - ANSI 150 lb. drilling), (AWWA Class E or F Flanges available). End Rings: Steel, Malleable or Ductile Iron according to size and requirement. Gaskets: SBR (Buna S) Rubber, (AWWA C111). Fasteners: 5/8" NC T304 Stainless Steel (ASTM A473). T316 Stainless Steel available. Anchor Pins: (as required) HSLA Steel Anchor Pins (AP) for pipe sizes up to 12" (T304 Stainless Steel available). Coating: Corrosion Protection Epoxy Coating (AWWA C213-79). OTHER CONFIGURATIONS: 7806: Enamel coated Center Sleeve and End Rings, Stainless Steel fasteners. 7906: Epoxy coated Center Sleeve and End Rings, Stainless Steel fasteners. 7909: Epoxy coated Center Sleeve, End Rings and bolts. HOW TO ORDER: Determine the product number (7906, etc.), nominal flange size, actual pipe OD and whether Anchor Pins (AP) are required,and then use the appropriate ordering code as shown in the following example. To couple a 16" OD Steel pipe to a 16" flanged connection, the ordering code is: 7906 16" 16.00" product number

nom. flange size

actual pipe OD

i.e. 7906 - 16 - 16.00

ROBAR INDUSTRIES LTD. B.C.

Phone

(604) 591-8811

LES PRODUITS INDUSTRIELS ROBAR INC. QUEBEC

Phone

1-800-663-6553 Fax Effective: January 1, 2000

(604) 591-5288

(450) 641-9525

1-800-315-9525 Fax

(450) 641-4894

7.2.3

7906 FLANGED COUPLING ADAPTERS FABRICATED STEEL PRODUCT INFORMATION

ROBAR

ROBAR

BAKER

NOMINAL SIZE NO. BOLTS PIPE AVAILABILITY* (COUPLING) SIZE 4 6 8 10 12 14 16 18 20 24 30

3.94 5.94 7.94 9.94 11.94 13.88 15.88 17.88 19.88 23.88 25.88 -

4.86 6.96 9.10 11.25 13.29 15.24 17.89 20.01 22.15 26.41 30.09

3 5 6 7 8 8 10 10 12 14 16

NO. ANCHOR PINS (AP) REQUIRED**

APPROXIMATE SHIPPING WEIGHT (LBS.) (KG.)

2 2 4 4-6 6-8

30 35 50 60 85 130 146 159 183 288 330

See Note

13.6 15.9 22.7 27.3 38.6 59.1 66.4 72.3 83.2 130.9 150.0

All dimensions are in inches

Note:

* ** • • • • •

This is not the coupling range. It is the minimum and maximum of popular sizes. ODs must be specified. If ordered, specify maximum working pressure. For pipe sizes over 12", anchor pins are recommended. Price on application. Submit full pressure and test data. No flange bolts or gaskets supplied. Only popular sizes shown above. All pipe sizes up to 72" and larger are available. Special coatings, gasket, flanges, fastener materials and isolating boots are available. For price and availability of items not shown, ROBAR and specify the pipe and flange sizes to be coupled along with any special requirements.

ROBAR INDUSTRIES LTD. B.C.

Phone

(604) 591-8811

LES PRODUITS INDUSTRIELS ROBAR INC. QUEBEC

Phone

1-800-663-6553 Fax

7.2.4

(604) 591-5288

(450) 641-9525

1-800-315-9525 Fax

(450) 641-4894 Effective: January 1, 2000

SECTION 8 - CONTENTS EXPANSION TS

ROBAR

EXPANSION TS 8808

Expansion ts

8.1.1

Style 1

8.1.2

Style 2

8.1.2

Style 3

8.1.2

Style 4

8.1.3

ROBAR INDUSTRIES LTD.

B.C.

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: January 1, 2000

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

8.0.1

8808 EXPANSION T FABRICATED STEEL PRODUCT INFORMATION

ROBAR

ROBAR

STANDARD SIZES: 3" to 24" Nominal Pipe OD. Sizes outside of those specified may be ordered by ing ROBAR for quotation. There are four basic styles: Single End without limit rods (8808-1), Single End with Limit Rods (8808-2), Double End without limit rods (8808-3), and Double End with Limit Rods (8808-4). All of these are available in two other configurations: 8809 and 8906 (see below).

BAKER

APPLICATIONS: 8808 Expansion ts are used in Steel pipelines where large longitudinal pipe movements are concentrated. Use for piping water, gas, oil and various chemicals.

MATERIAL SPECIFICATION: Flanges & Slip Pipe: ASTM A-7 Mild Steel Plate. Stainless Steel or Chrome Plated Mild Steel Slip Pipes are recommended for most permanent applications. Fasteners: 8808: HSLA steel Trackhead bolts, (AWWA C111). 8906: T304 Stainless Steel Trackhead bolts, (ASTM A743-70). Packing: Standard packing SBR Rubber / Jute, (AWWA C111), special packings are available. End Preparation: Plain end (bevelled for welding) Flanged end, (AWWA C207 Class D - ANSI 150 lb. drilling), other flanges available. Grooved end also available. Coating: 8808: Two coats of Enamel. 8809: As 8808 but with Epoxy coated bolts. 8906: Corrosion Protective Epoxy coated, (AWWA C213-79). HOW TO ORDER: Determine the product number (8808, 8809, or 8906), the Expansion t style (Style 1, 2, 3, or 4), and the exact pipe OD (see page 8.1.3) and then use the appropriate ordering code as shown in the following example. For a 24" OD pipe on which 6" pipe movement is expected, the ordering code is: 8808 1 24.00" product number

style

actual pipe OD

i.e. 8808 - 1 - 24.00

Note:

•

All expansion ts are built to order. Allow for longer than normal delivery time.

ROBAR INDUSTRIES LTD.

B.C.

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: January 1, 2000

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

8.1.1

8808 EXPANSION T FABRICATED STEEL PRODUCT INFORMATION

ROBAR

SERIES 401 ROBAR

BAKER

8808-1 (Style 1) EXPANSION T 8906-1 8909-1

BODY

FOLLOWER SLIP PIPE

PIPE STOP

PACKING GLAND

CONSTRUCTION: 8808-1 (STYLE 1) Expansion t is designed to satisfy the requirements of most applications. This style allows for up to 10" of longitudinal pipe movement, has one Slip Pipe and a single Packing Gland with no Limit Rods (see material specifications page 8.1.1).

8808-2 (Style 2) EXPANSION T 8906-2 8909-2

FOLLOWER

BODY

SLIP PIPE

PIPE STOP

PACKING GLAND

CONSTRUCTION: 8808-2 (STYLE 2) Similar to details of Style 1 Expansion t except that it has two Slip Pipes and two Packing glands. When the t Body is anchored, this style of Expansion t allows 4" of pipe movement at each end, for a total of 8".

8808-3 (Style 3) EXPANSION T 8906-3 8909-3

FOLLOWER STOP RING

BODY

LIMIT ROD SLIP PIPE

PIPE STOP

PACKING GLAND

CONSTRUCTION: Similar to details of Style 1 Expansion t except that a Stop Ring is welded to the Slip Pipe, and the regular bolts are extended through this ring. A set of double nuts engages the Stop Ring to limit the Slip Pipe from pulling out of the t.

ROBAR INDUSTRIES LTD.

B.C.

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: January 1, 2000

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

8.1.2

8808 EXPANSION T FABRICATED STEEL PRODUCT INFORMATION

ROBAR

ROBAR

SERIES 401

BAKER

8808-4 (Style 4) EXPANSION T 8906-4 STOP RING 8909-4

FOLLOWER STOP RING BODY

LIMIT ROD SLIP PIPE

PACKING GLAND PIPE STOP CONSTRUCTION: Similar to details of Style 2 Expansion ts except that this style has two Stop Rings welded on the Slip pipes As with Style 3, a set of double nuts engages each Stop Ring to limit the Slip Pipes from pulling out of the t. INSTALLATION: The Expansion t may be contracted to 26 1/4" length or fully expanded to 36 1/4" length. The installer sets the length between these two extremes. The Slip Pipe is welded to one pipe in the line, and the t Body is welded to the other pipe. Care should be taken to protect the gasket-bearing surfaces from corrosion or undue wear from line content or environment. INFORMATION REQUIRED FOR ORDERING: 1. Total quantity required. 2. Type of pipe, wall thickness and exact OD of pipe. 3. Type and Style of Expansion t. 4. Service or line content - water, gas, sewage, etc. 5. Maximum working and test pressures (psi). 6. Calculated movement at each t, and frequency. 7. Minimum and maximum temperature ranges. 8. End preparation of pipe where Expansion t is required (flanged, beveled for welding, etc.).

ROBAR INDUSTRIES LTD. B.C.

Phone

(604) 591-8811

LES PRODUITS INDUSTRIELS ROBAR INC. QUEBEC

Phone

1-800-663-6553 Fax Effective: January 1, 2000

(604) 591-5288

(450) 641-9525

1-800-315-9525 Fax

(450) 641-4894

8.1.3

SECTION 9 - CONTENTS MISCELLANEOUS

ROBAR

MISCELLANEOUS 9010

Drilling Machine

9.1.1

9440

Meter Couplings

9.3.0

9626

Adjustable Inserts

9.4.1

9999

Recreational Horseshoes

9.5.1

ROBAR INDUSTRIES LTD.

B.C.

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: January 1, 2000

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

9.0.1

9010 DRILLING MACHINE PRODUCT INFORMATION

ROBAR

ROBAR

SERIES 901

APAC

NEW MODEL - NO EXTENSION REQUIRED: The 9010 Drill Master is the result of 30 years of revisions to the original Dan-Dee drilling machine. It is made of the finest non-corrosive materials, with each machine being individually inspected prior to shipment. Its light weight, versatility, and ease of operation have made it a favorite of installers within the Waterworks Industry. FOR DRILLING CI, A/C, STEEL AND PLASTIC MAINS

ADAPTER

TYPE 9010: • A compact tool that drills mains for 3/4", 1", 1 1/4", 1 1/2" and 2" CC or IP Taps (see manufacturer's notes). • Completes the operation before you can set up older, heavier machinery. • Removes the coupon from the pipe - No drillings in your water system. • For tapping (hot & dry) DI, CI, A/C, Steel and Plastic mains. • Basic machine includes: ratchet wrench, pilot drill, Allen wrench and carrying case. (See page 9.1.2) • Machine weight: 7 lbs. Shipping weight w/carrying case: 17 lbs.

CUTTER

DRILL

Note:

• • • •

The 9010 is not recommended for use on any fluid distribution system other than water. The use of mechanical assist tools such as drill motors or impact hammers is not recommended, as such use may bind the cutter and possibly break the stainless steel shaft. Avoid the drilling of pipes with pressures in excess of 175 psi, as higher pressures may blow out seals. Observe all accepted safety precautions when operating machine.

ROBAR INDUSTRIES LTD.

B.C.

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: January 1, 2000

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

9.1.1

9010 DRILLING MACHINE PARTS PRODUCT INFORMATION

ROBAR

SERIES 901 ROBAR

APAC

DESCRIPTION A Ratchet Wrench B Shaft Drive Nut C Brass Bearing Cap D Feed Hand Wheel E Feed Wheel Set Screw F Thrust Bearing G Brass Feed Tube H Teflon Wiper I Metal Snap Ring J Brass Body K "O" Ring Packing L Gasket (machine to adapter) M Stainless Steel Shaft N Shaft Snap Ring O Pilot Drill P Pilot Drill Set Screw Q Allen Wrench R Shell Cutter Bushing

A

B C D E F

G M

CATALOG NUMBER 908-080 908-081 908-082 908-083 908-084 908-085 908-086 908-087 908-088 908-089 908-090 908-091 908-092 908-093 908-094 908-095 908-096 908-097

(Furnished with 2" Steel Shell Cutters to adapt to shaft thread. All other cutters require no bushing.)

S

H

Carrying Case Basic Machine

908-000 9010

I

P J N

Q

O K L

ROBAR INDUSTRIES LTD.

B.C.

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: January 1, 2000

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

9.1.2

9440 METER COUPLING CAST DUCTILE IRON PRODUCT INFORMATION

ROBAR

SIZES AVAILABLE: 1 1/2" and 2" Nominal. APPLICATIONS: ROBAR 9440, 9450, or 9470 Meter Coupling Flanges are used for drilling and tapping to NPT standards to mate with Flanged Water Meters.

MATERIAL SPECIFICATION: Body: Cast Ductile Iron (ASTM A536). O-Ring: NBR (BUNA N) Rubber, (ASTM A5568). Coating: 9440: Two coats of Enamel. OTHER CONFIGURATIONS: 9450: Corrosion Protective Epoxy coating (AWWA C213-79). 9470: 85-5-5-5 Waterworks Bronze (ASTM B62 and AWWA C-800). HOW TO ORDER: Determine the product number (9440, 9450 or 9470) and nominal size and then use the appropriate ordering code (see table below) as shown in the following example. For a 2" Meter Flange in Epoxy coated Ductile Iron, the ordering code is: 9450 - 2

NOMINAL SIZE

1 1/2"

2"

Note:

•

Phone: Fax: E-mail:

APPROXIMATE SHIPPING WEIGHT (LBS.) (KG.) 9440 2.25 1.1 9450 2.25 1.1 9470 2.07 1.2 9440 2.75 1.3 9450 2.75 1.3 9470 3.00 1.4 All dimensions are in inches

Kits available upon request.

ROBAR INDUSTRIES LTD.

B.C.

PRODUCT NUMBER

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: January 1, 2000

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

9.3.0

9626 ADJUSTABLE INSERT FABRICATED STAINLESS STEEL PRODUCT INFORMATION

ROBAR

STANDARD SIZES: 6" to 24" Nominal Pipe OD. Larger sizes are available upon request. APPLICATIONS: ROBAR 9226 Adjustable Inserts are for use on thin wall PVC or High Density Polyethylene pipe, to add hoop strength to pipe when using ROBAR couplings, repair clamps or restraining devices.

MATERIAL SPECIFICATION: T304 stainless steel, fully ivated for maximum corrosion protection. HOW TO ORDER: Determine the product number 9 ( 626) and exact Inside Diameter of PVC or High Density Polyethylene pipe and the insert length (6", 8" or 12") and then order by using the appropriate ordering code as shown in the following example. For an 8" long insert required for a 6" SDR 26 High Density Polyethylene pipe (6.08" ID), the ordering code is: 9626 6.08" x 8" product number

inside diameter

insert length

i.e. 9626 - 6.08 x 8

Note:

•

9626 Adjustable inserts are available for 6.19" ID and larger. Fixed inserts are available from 4.50" ID. Exact ID is required for fixed inserts.

ROBAR INDUSTRIES LTD.

B.C.

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: January 1, 2000

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

9.4.1

9999 RECREATIONAL HORSESHOES CAST DUCTILE IRON PRODUCT INFORMATION

ROBAR

3"

1" Ø Steel Pin

14" Sand (or blue clay) fill

5 1/2" Maximum Weight is 2 1/2 lbs. Two pairs of shoes in a set Each pair is identified as "A" or "B"

SECTION "A - A" (PIN)

THE COURT Foul Line

Foul Line

6'

34'

6'

CL

CL

3' a

CL

a

6' Pin

3'

40'

Plan View Horseshoe "Pitch"

ROBAR INDUSTRIES LTD.

B.C.

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: January 1, 2000

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

9.5.1

9999 RECREATIONAL HORSESHOES CAST DUCTILE IRON PRODUCT INFORMATION

ROBAR

PLAYING THE GAME To Start:

A coin is tossed. The winner decides who pitches first.

Singles:

One player throws two "A" horseshoes at the opposite stake. His opponent throws "B" horseshoes in turn at the same stake. They then walk to the stake, tally the score and pitch back towards the first stake.

Doubles:

Partners separate, one at each stake. Shoes are tossed by one set of opponents as discussed in Singles. Their partners toss their horseshoes back in turn. Scores are added together without the necessity of travel between ends.

Pitching:

The pitcher must stand with his feet behind the foul line until the horseshoe has left his hand. The opponent must not distract the pitcher. Neither player may walk to the opposite stake until four horseshoes have been thrown. Horseshoes should not be touched or moved until scores have been decided.

Scoring:

In order to score one point, a shoe must be within a specified distance of the stake. Official rules state 6 inches. For convenience in recreation, the width across the "prongs" may be used. A "ringer" is a horseshoe which encircles the stake so that a straight edge will touch the tips of the prongs without touching the stake. Ringers score 3 points. In official rules a leaning shoe has no value over one touching the stake, but in recreational play 2 points may be allotted to "leaners". Any horseshoe closer to the stake than an opponent's scores points. If one player scores one ringer and his opponent also scores a ringer, they cancel. If one player scores two ringers and his opponent scores one ringer, the first player scores 3 points. The high scorer in one innning pitches first in the next inning. If an inning results in "no points" the order of pitching alternates.

Official Rules: The preceeding rules are not intended for official play. A good reference book containing the official rules of horseshoe pitching is "The Story of Horseshoes" by Otto W. R. Reno, Vintage Press.

ROBAR INDUSTRIES LTD.

B.C.

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: January 1, 2000

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

9.5.2

SECTION 10 - CONTENTS AFTERWORD

ROBAR

Glossary

ROBAR INDUSTRIES LTD.

B.C.

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: January 1, 2000

10.1.1

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

10.0.1

GLOSSARY ROBAR

ASTM

American Society for Testing and Materials

ANODE

Made from an alloy that will generate current to protect the fitting from corrosion

ANSI

American National Standards Institute

AWWA

American Water Works Association

CATHODICALLY PROTECTED

Designed for electrical continuity throughout the entire fitting. Such fittings are often used with sacrificial anodes for maximum galvanic and corrosion protection of the fitting

CC

Corporation Thread (AWWA Taper thread).

CENTER SLEEVE

The center portion of a coupling, (also called the barrel or center ring)

END RINGS

The part of a coupling that accepts bolts to apply thrust to the gasket creating a seal to the pipes being ed (also called the follower or end plate)

HDPE

High density polyethylene

HSLA STEEL

High strength low alloy steel

IP

Iron pipe thread

IPS

Iron pipe size

MS

Mild Steel

NBR (Buna N)

Acrylonitrile butadiene (rubber gasket material)

NC

National Coarse (in reference to thread pitch)

PVC

Polyvinyl Chloride

SBR (Buna S)

Styrene butadiene (rubber gasket material)

SDR

Standard Dimension Ratio (Nominal pipe outside diameter/minimum wall thickness) - Generally associated with plastic pipe series

ROBAR INDUSTRIES LTD.

B.C.

Phone: Fax: E-mail:

(604) 591-8811 / 1-800-663-6553 (604) 591-5288 [email protected]

Effective: January 1, 2000

LES PRODUITS INDUSTRIELS ROBAR INC.

QUEBEC Phone: Fax:

(450) 641-9525 / 1-800-315-9525 (450) 641-4894

10.1.1