1. Easy Boot có thể run Bootable ISO file không? Được, cách thực hiện: Copy file ISO (hiển nhiên phải bootable) vào thư mục trong disk1, sau đó, dùng đoạn code sau để boot từ file ISO này: run
Easy thực hiện điều này bằng bcdw (Boot CD Wizard - ở các phiên bản sau). Chức năng này thực sự rất tiện lợi, điển hình nhất là có thể cập nhật file ISO một cách dễ dàng. Chú ý, có một số file ISO không hỗ trợ theo cách này, điển hình nhất là các file set up Window của Microsoft. 2. Hình ảnh khi boot Easy boot hỗ trợ có thể lên tới 24bit true image. 3. Easy Boot dùng kết hợp với UltraISO, có thể tạo boot trực tiếp từ USB dễ dàng. 4. Cách tích hợp Avira Rescue disk và Kaspersy 1. AV Resuce Disk's -- Avira Rescue Disk a) Open the Avira Rescue Disk .iso file with UltraISO. b) Extract everything from the .iso file to C:\EasyBoot\disk1\ c) Extract boot information by opening the Avira Rescue Disk .iso file with UltraISO, click on "Bootable", then click on "Save Boot File..." and save the file as avir.bif to C:\EasyBoot\disk1\ezboot\ Command: "bootinfotable;run avir.bif" -- Kaspersky Rescue Disk 10 a) Make a copy of Kaspersky ISO. b) Open .iso file with UltraISO and extract files: image.squashfs, folder rescue and livecd to C:\EasyBoot\disk1\ c) Delete files: image.squashfs, folder rescue and livecd in .iso file and save ISO-file (ISO is now less in size). d) Use easyboot-iso.script to integrate reduced ISO-file (do not check “Run from RAM”). Command: "memdisk kd10.img.gz"