Huawei Bts 3900 Series Configuration 576t5d

Huawei BTS 3900 series configuration example

In Huawei system, most all of software commisioning is done by BSC engineer/integrator. Field engineer only do hardware (cabling, module) configuration. Check common capacity configurations below.

Key Features:

- shares the BBU, which is the central processing unit, with the BTS3900 to minimize the number of spare parts and reduce the cost. - can be flexibly installed in a small footprint and can be easily maintained - s multiple frequency bands, such as PGSM900, EGSM900, and DCS1800 - s the GPRS - s multiple network topologies, such as star, tree, chain, ring, and hybrid topologies - s the cell broadcast SMS and point-to-point SMS.

- single cabinet s up to 12 carriers in the maximum cell configuration of S4/4/4. Common Subsystem (1) BBU Control subsystem whose functions are implemented by the BBU (2) DRFU RF subsystem whose functions are implemented by the DRFU (3) DCDU Power subsystem (4) Fan Box BTS3900 Cabinet and Boards BSBC(BBU) Universal BBU Subrack Backplane type C (2U) UEIU Universal Environment Interface Unit GTMU GSM Transmission and Management Unit for the BBU UELP Universal E1/T1 Lightning Protection Unit UBFA Universal BBU Fan unit type A (2U) UPEU Universal Power and Environment interface Unit DRFU Double Radio Filter Unit DCDU Direct Current Distribution Unit GATM GSM Antenna and TMA Control Module Fan box Fan box Functions of BBU l Provides physical ports between the BTS and the BSC for interaction l Provides the RI ports for communication with the DRFU l Provides the USB port for ing the BTS software l Provides OM channels for connection to the LMT (or M2000) l Processes UL and DL data l Provides centralized management on the entire BTS system, such as OM and signaling processing l Provides the reference clock for the entire system Functions of BSBC Board

l Clock signal: The BSBC sends the precise clock signals provided by the GTMU to each service processing module as reference clock. l Power input: The BSBC distributes the +12 V DC power input provided by the power module to the boards and modules. l Low-speed signal management: The BSBC provides the interface for the GTMU to monitor and manage the service board, power, backplane, and fan. l High-speed signal management: The BSBC distributes and converges information about data, control, and management of all boards in the baseband unit system l Service signal: The BSBC transfers the UL and DL baseband data of the GTMU. Functions of UBFA Module l Fan control board (1) Processes the two-channel 12 V power input by the backplane to provide power for the fan (2) Communicates with the GTMU to control and monitor the fan (3) Detects and adjusts the fan speed (4) Detects the board temperature by the built-in temperature sensor (5)Provides the automatic reset function l Fan: performs forced heat dissipation for the entire BBU Functions of UPEU Module l Supplies power to the boards, modules, and fans l Introduces environment monitoring signals to the BBU l Reports fault signals, in-position signals, and version information associated with the boards and modules Function of GTMU Board l Controls, maintains, and operates the BTS l s fault management, configuration management, performance management, and security management l s the monitoring of the fan module and power supply module l Provides port for terminal maintenance l s four E1 inputs

l Provides RI ports for communication with the RF modules Functions of DRFU l It implements the direct frequency conversion technique in the transmit channel, modulates the baseband signals to GSM RF signals. After filtering, amplifying, and combining the RF signals, the DRFU sends the signals to the antenna for transmission. The combining can be performed as required. l It receives RF signals from the antenna and performs down-conversion, amplification, analog-to-digital conversion, matched filtering, and Automatic Gain Control (AGC). Then, the DRFU transmits the signals to the BBU for further processing.