Ipecs-emg80 Quick Start Guide (2) q2c26

 

iPECS eMG80 Quick Start Guide

 

 

 

 

 

 

 

 

Install wizard IP connection to the eMG80 •

 

Configure system parameters through the LAN port of the KSU

   

1. Set your PC IP address to “10.10.10.xxx” eg 10.10.10.5 2. Connect LAN cable between PC and eMG80 KSU 3. Enter the system default IP address of “https://10.10.10.2” in the internet browser to access iPECS eMG80 system * Internet browser can be Chrome, Firefox or Internet Explorer 10 or above

 

 

 

 

 

 

 

 

Install wizard Step 1

• Enter default web ID() and (1234)

 

                                             

Default web ID () and (1234)

 

 

 

 

 

 

 

 

 

Install wizard Step 2

• Set nation code                                                        

To change the NATION Code on eMG80: 1. Set the KSU MPB SW1 Dip Switch Pole 2 to the On position, 2. Enter the NATION code 3. Press the reset button on the KSU, power the system Off and On 4. After initialization, move Dip-switch 1 pole 2 to the OFF position  

   

 

Install wizard Step 3  

• Set system (MPB) IP address

 

 

 

   

 

 

 

 

 

 

 

 

 

Install wizard Step 4

• Set Station number

 

 

 

 

 

 

 

 

 

 

Install wizard Step 5

• Set numbering plan for CO access, attendant call, pickup, hunt group

                                                   

 

! ! ! !

 

Access CO in first CO Group : Dial code to access the 1st available CO Line in any accessible group. Attendant Call : Dial code to call an Attendant. Group Call Pick-Up : Dial code to activate Group Call Pick-up. Station Group Pilot number : Assign the pilot number on each Station Group eg 620 – 659 NOTE: This will conflict with Camp On code 621 in PGM 106, so change the Camp on feature code

 

 

 

 

 

 

 

Install wizard Step 6

• Set ring assignment

                 

  101 0

 

 

107

 

 

 

 

 

 

 

Install wizard Step 7 • Set web ID and default ID/ should not be used

                                                   

- Up to 50 s ID and can be ed. - Up to 10 s can to a system simultaneously.

 

Press Save to store the entered information.

 

 

 

 

 

 

 

 

 

Install wizard Step 8 • Enter system using saved ID and in step 7

 

 

 

 

 

 

 

Multi language  

   

 

 

dual language (English and Local) When logging to the iPECS eMG80 the web language may be in Korean To change the web language to the iPECS eMG80 Click on change Language tab on the right hand side, then select English