Msds Of Pine Oil 232n2u

MANGALAM ORGANICS LIMITED 812, TULSIANI CHAMBERS 212, NARIMAN POINT, MUMBAI – 400 021, INDIA Tel. 91-22-4088 4089 Fax. 91-22-4088 4081 Website. www.dujodwala.com

__________________________________________________________________ MATERIAL SAFETY DATE SHEET OF PINE OIL

1. PRODUCT IDENTIFICATION Product Name Pine Oil

Synonym Pine Oil

CAS Number 8002-09-3

Use Varied applications

2. COMPOSITION / INFORMATION ON INGREDIENTS: Chemical Nature: Mixture of Terpene Alcohols & Terpene Hydrocarbons. Hazardous ingredients: Terpene alcohols: Dangerous goods class : 3 Hazchem code : 3(Y) Pack Group : III EPG : 14 3. HAZARD IDENTIFICATION: Ingestion: May cause irritation to mucous Eye : membrane Inhalation: Mist & aerosols irritates nose & throat. Skin :

May irritate May irritate

4.

FIRE AID MEASURES Ingestion: Rinse mouth & drink water. If large quantities have been swallowed obtain medical attention. Eye : Immediately wash eye thoroughly with water. Seek medical attention. Skin : Wash off contamination with water seek medical attention if irritation persists. Remove all contaminated cloths. Inhalation: Remove patient to fresh air. 5. FIRE-FIGHTING MEASURES: Extinguishing Media : Water, dry foam or CO2. Unsuitable Extinguishing Media: None known Special Protective Equipment: Self contained breathing apparatus should be used when fighting fires. Special Exposure hazardzs: combustible liquid and Vapours. 6. ACCIDENTAL RELEASE MEASURES Personal Protection: Rubber/ PVC & full working clothes, Goggles recommended. Environmental protection: Collect as much as possible in a clean container for disposal. Remove all sources of ignition. 7. HANDLING & STORAGE Handling: Handle in a well ventilated work place away from any ignition sources. Use normal handling precautions applicable for Industrial chemicals. Storage: Store in a cool, dry, well-ventilated place away from all sources of ignition. Fire and Explosion protection: Store in a cool, dry, well-ventilated place away from all sources of ignition.

8. EXPOSURE CONTROLS & PERSONAL PROTECTION personal Protection: N/A under normal condition however, good ventilation should be provided in working area. Skin : use rubber PVC gloves & full working clothes contaminated clothing should be laundered before use. Eye/Face :Goggles & eye wash station recommended. Engineering measure: Local exhaust recommended. 9. PHYSICAL/CHEMICAL CHARACTERISTICS Boiling Point (760 mm Hg):365°F (185°C) Odor :Mild Pine aroma Vapor Pressure (mmHg @ 20°C) :N/A Vapor Density (Air = 1) : N/A Specific Gravity (H2O =1): 0.870 - 0.945 Refractive Index (@ 20°C): 1.48 Solubility in Water: 1% Evaporation Rate (butyl acetate = 1): >1.0

10 STABILITY & REACTIVITY: Heating will cause pressure rise with risk of bursting and subsequent explosive. 11. TOXICOLOGICAL INFORMATION Skin : Moderate irritate Eye : May irritate 12. ECOLOGICAL INFORMATION Additional information: May irritate the mucous membrane causing palpitation, dizziness, chest paints, Bronchitis. 13. SPILLS:  Clean –up personnel should wear full protective clothing including breathing apparatus. Remove all sources of ignition-No smoking. Increase ventilation.  Collect as much as possible in a clean container for (preferable) reuse or disposal. Remove all sources of ignition. DISPOSAL May be disposed of by landfill or by incineration, subject to local authorization using licenced contractors. 14. OCCUPATIONAL PROTECTIVE MEASURES Un No.: 1272 Class: 3 Hazchem Code: 3(Y) Pack Group: III Flash point: > 50°C cc upto 63°C cc EPG No.: 14 Shipping Name: Pine Oil Hazard IRRITANT 15. REGULATORY INFORMATION Risk Phrases: * R10 Flammable * R 38 Irritating to skin Safety Phrases: * S2 keep out of the reach of children. * S28 After with skin, wash immediately with plenty of soap-suds. 16. OTHER INFORMATION

Aquatic toxicity=TLm96>1000ppm (Aquatic Toxicity “ Product is insoluble in water therefore the availability to aquatic organisms would probably by very low).

The information contained herein is based on data considered to be accurate and reliable. No warranty is expressed or implied regarding the accuracy or correctness of this data. It is the 's obligation to determine the safe use of the product since conditions of use, handling, storage and disposal are beyond our control.