Mv Cables Ducab 1c6e4r

§°Sƒàª`dG ó¡é`dG äGP ábÉ£dG äÓHÉc ¢SÓHQhÉH

Powerplus MEDIUM VOLTAGE CABLES

808 2599

Ref No: PP3/0107

808 2500

[email protected]

Toll Free : 800-Ducab

Powerplus

Contents SECTION

PAGE

1. Introduction

1

2. Quality

2

3. Cable Selection

3-4

4. Cable Data

5

5. Cable Data Look-up Table

6-7

6. Cable Data Tables

8 - 57

7. Technical Data and Rating Factors

58 - 65

8. Drum Handling Instructions

66 - 67

BICC

¢SÓ``````HQhÉ``H INTRODUCTION Ducab is the leading manufacturer of electric cables in the Middle East. Established in 1979, the company is owned by the Governments of Dubai and Abu Dhabi. Ducab is based in Jebel Ali, however to keep pace with the steady growth of the region, Ducab opened a second factory in Abu Dhabi in 2005. This state of the art facility doubles the production capacity enabling Ducab to better service its customers. This catalogue provides working information on Ducab’s complete range of Ducab Powerplus Cables rated up to 33 kV. Separate catalogues are available for Ducab’s range of Control and Auxiliary Cables, Wiring Cables, Ducab Smokemaster LSF Cables and XLPE Low Voltage Cables. This brochure contains technical information covering the Ducab Powerplus range of XLPE insulated medium voltage cables rated up to U0/U = 18/30kV i.e., equivalent to 33kV rating of the British Standards. The applicable standards are IEC 60502-2 and BS 6622. The Ducab Powerplus cable range includes copper and aluminium conductors in a range of voltages with a choice of single or three core armoured and unarmoured, a range of sheathing, screening, taping and armouring options. To locate particular voltages and cable designs and eliminate errors a look-up guide has been included (see pages 6 & 7). This acts as a guide to the cable data for the Ducab Powerplus range of cables set out in pages 8 - 57. Technical Data is covered in pages 58 - 65. Cable handling instructions appear in pages 66 - 67. The cable designs in this brochure are to IEC 60502-2 and in most parts to BS 6622. Ducab can also supply a range of alternative designs to meet more specialised customer needs including water blocking, Ducab Smokemaster to BS 7835 and enhanced fire performance. Alternative sheathing materials and colours can also be manufactured along with cables to individual customer specifications. “Ducab Connect” range of cable components and accessories for medium voltage cables are also available on request. For “Ducab Connect” product range for MV cable please , Telephone : (971-4) 808 2500, Fax : (971-4) 808 2599.

BICC

1

Powerplus

Quality Where Quality is a Way of Life The definition of quality in Ducab goes far beyond the conformance of product to specified requirements. Ducab is committed to providing the customer with total quality excellence of product and service that fully meets expectations and is superior in value to that which can be obtained elsewhere. Since its inception, Ducab has an unrivaled reputation for quality in the region. For many years the company has worked to raise quality awareness in Dubai and throughout the Gulf. The company’s Quality Management System was certified to ISO 9001 in 1995 and upgraded in 2002 to the new, more stringent ISO 9001 : 2000 standard by BASEC (British Approval Service for Cables), a reputed UKAS accredited certification body specialising in the cable industry. Ducab was the first cable company in the Middle East to achieve this distinction. In 1997, Ducab became the first manufacturing company in the Middle East to obtain the ISO 14001 environmental certification. Ducab is also the only cable manufacturer in the Middle East to obtain product type approval of a range of low voltage cables to British Standards by BASEC (The British Approvals Service for Cables). This approval is only awarded to manufacturers who meet the requirements of BS EN ISO 9000 Quality Management Standard and certified by BASEC. Ducab cables have been type tested in reputed external laboratories like KEMA, The Netherlands; BRE, UK; RI, India, etc. Ducab is proud to hold Lloyd’s approval for various product range.

Quality Assurance Ducab’s quality management system is certified for conformance to ISO 9001 Standard by BASEC. Ducab’s medium voltage cables have been accepted as world class following the type testing and certification of several products by the KEMA High Voltage Laboratory in the Netherlands. Type testing included the requirements of the IEC 60502-2 standard and some of the stringent provisions of BS 6622: 1999 standard. 11kV and 33kV cables tested by KEMA consistently exhibited discharge-free characteristics. These cables also withstood Basic Impulse Levels of 95kV and 195kV respectively as against 75kV and 175kV specified in IEC 60502-2. Ducab’s high voltage test facility includes modern, highly sensitive partial discharge test equipment, situated in a fully screened room. For materials and in-process cable tests, well-equipped laboratories, manned by experienced and trained personnel are available. A separate cable fire test facility exists for IEC 60332 Pt. 3, smoke density and other tests.

2

BICC

¢SÓ``````HQhÉ``H

Cable Selection It is essential that any design of a cable system selected for a particular project or a distribution system is suitable for its intended use. Choice needs to be based on a range of factors including installation specifications, local regulations and the required performance characteristics, some of which are shown below: • normal current load • maximum fault current and its duration under fault conditions • voltage grade • subsoil conditions for underground installations e.g., presence of water, soil temperature and thermal resistivity, possible attack of rodents, termites etc. • cable fire performance requirements • compatibility with an existing distribution system In the tables in the next section, cable constructions and performance features correspond to IEC 60502-2 Standard and Ducab’s in-house quality norms.

Cable Design and Construction CONDUCTORS The conductors of all Ducab’s HV and MV cables, both copper and aluminium, with the exception of very large sizes of 800sq mm and above, are all HCC + ™ design. These are highly compacted and concentric conductors and offer the following advantages: * Smaller overall size * Smoother conductor/conducting screen interface Conductors of 800 sq mm and above, are plain stranded and wrapped with penetration resistant semi-conductive tape prior to age through the triple extrusion line. All conductors comply with the requirements of IEC 60228, Class 2. CONDUCTOR SCREEN This is a layer of crosslinkable semi-conducting compound extruded directly over the conductor during the XLPE insulation extrusion. INSULATION All Ducab’s MV and HV cables feature DFI ™ XLPE insulation which is virtually discharge free, ensuring a long and trouble-free service life. The insulation is extruded and dry cured to meet the requirements of the standards and/or customer specification. A high degree of concentricity is assured through the use of x-ray monitoring device during extrusion. The XLPE insulation is capable of operation continuously at 90˚C. INSULATION SCREEN This is a layer of cross-linkable semi-conducting compound extruded directly over the insulation at the same time when the conductor screen and XLPE insulation are extruded. This semi-conducting screen is cold strippable but fully bonded screens may be provided, if specified.

BICC

3

Powerplus

Cable Selection METALLIC SCREEN The metallic screen can be a helically applied copper tape or a number of copper wires applied with a lay or a combination of tape and wires applied over the semi-conducting screen. The metallic screen provides the earth fault current path and it is of a cross section designed as per customer’s performance specification. In case of three core cables, phase identification tapes (red/yellow/blue) are generally longitudinally applied under the metallic screen. LAYING

UP

In the case of three core cables, the three cores identified as red, yellow and blue are laid up together with polypropylene string fillers at the interstices between the three cores. A binder e.g., polyester tape is wrapped round the assembly to form a compact circular cable during this process. BEDDING SHEATH Black polyvinyl chloride (PVC) or Polyethylene (PE) Compound is extruded over the laid up 3 core cable or on the screened single core cables. ARMOURING This process is not applicable if an unarmoured cable is specified. If armour is required, then following variations are possible: • Single Core Cables: Aluminium armour wires applied all round the cable with a lay. • Three Core Cables: a) Galvanised Steel Wires applied all round the cable with a lay. b) Galvanised Steel Tapes applied helically to provide coverage all round the cable. OVERSHEATH This is an extruded layer of black PVC (Type ST2) or PE (Type ST 3 or ST7) as required by customer specification. The oversheath has an embossed legend in two or more lines appropriate for the cable. SPECIAL FEATURES The cable as a whole or its specific cores or other design elements can vary in a number of ways to meet specific customer needs. The following are some examples, and by no means an exhaustive list of special features possible: • Longitudinal and radial water blocking of conductors, cores or complete cable. • Extra water-tree retardant XLPE insulation • Lead sheath construction • PVC oversheath with: a) reduced flame propagation (RP) and low HCL (LHCL) emission properties b) anti-termite properties • Ducab Smokemaster™ Low Smoke and Fume construction using zero-halogen bedding and oversheath • Oversheath of red colour with sulphide-resistant and/or UV resistant properties • Graphite coated oversheath • Embossed legend as per customer specification • Metre length marking

4

BICC

¢SÓ``````HQhÉ``H

Cable Data The following data sheets cover a range of cables based on the IEC Specification 60502-2. Cables to other specifications and with special features such as lead sheaths, water swelling fillers, water blocking tapes and graphite coatings can also be supplied. For all cables the maximum conductor operating temperature is 90˚C and the limiting conductor temperature after short circuit is 250˚C. To locate a cable of a specific voltage rating and design, please refer to the look-up table on pages 6 & 7.

BICC

5

Powerplus

Look-up Table Single Core Copper

Armoured

Three Core

Aluminium Wire Steel Wire Steel Tape

3.6/6(7.2kV) Single Core Aluminium

Armoured

Three Core

Single Core Copper

Armoured

Three Core

Aluminium Wire Steel Wire Steel Tape

Aluminium Wire Steel Wire Steel Tape

6/10(12kV) Single Core Aluminium

Armoured

Three Core

Single Core Copper

Armoured

Aluminium

Armoured

Three Core

Aluminium Wire Steel Wire Steel Tape

Aluminium Wire Steel Wire Steel Tape

8.7/15(17.5kV) Single Core Three Core

Single Core Copper

Armoured

12/20(24kV)

Three Core Single Core

Aluminium

Armoured

Three Core

Single Core Copper

Armoured

Three Core

Aluminium Wire Steel Wire Steel Tape

Aluminium Wire Steel Wire Steel Tape Aluminium Wire Steel Wire Steel Tape

Aluminium Wire Steel Wire Steel Tape

18/30(36kV) Single Core Aluminium

6

BICC

Armoured

Three Core

Aluminium Wire Steel Wire Steel Tape

¢SÓ``````HQhÉ``H

Page 11 Page 12 Page 13

Unarmoured

Single Core Three Core

Page 8 Page 9

Unarmoured

Single Core Three Core

Page 33 Page 34

Unarmoured

Single Core Three Core

Page 13 Page 14

Unarmoured

Single Core Three Core

Page 38 Page 39

Page 20 Page 21 Page 22

Unarmoured

Single Core Three Core

Page 18 Page 19

Page 45 Page 46 Page 47

Unarmoured

Single Core Three Core

Page 43 Page 44

Unarmoured

Single Core Three Core

Page 23 Page 24

Unarmoured

Single Core Three Core

Page 48 Page 49

Unarmoured

Single Core Three Core

Page 28 Page 29

Unarmoured

Single Core Three Core

Page 53 Page 54

Page 35 Page 36 Page 37

Page 15 Page 16 Page 17 Page 40 Page 41 Page 42

Page 25 Page 26 Page 27 Page 50 Page 51 Page 52

Page 30 Page 31 Page 32

Page 55 Page 56 Page 57

BICC

7

8

BICC mA/m

Approx. Charging Current per phase at Uo = 3.6kV and f = 50Hz

kA

One Second Short Circuit Current Rating of Conductor

3.6/6 (7.2)kV Single Core Copper Conductors XLPE Insulated to IEC 60502-2 Unarmoured

7.15

217

200

196

0.38

0.34

0.51

0.12

0.494

0.387

396

500

800

20.0

1.6

2.5

420

8.4

50

10.10

262

240

240

0.43

0.38

0.36

0.12

0.342

0.268

428

500

1050

21.5

1.6

2.5

605

9.9

70

13.60

331

285

285

0.49

0.43

0.27

0.11

0.247

0.193

464

500

1370

23.5

1.7

2.5

839

11.6

95

250˚C.

17.20

382

320

320

0.53

0.47

0.22

0.11

0.196

0.153

494

500

1600

25.0

1.7

2.5

1056

13

120

Cable Data

LIMITING CONDUCTOR TEMPERATURE AFTER SHORT CIRCUIT IS

A

3. Laid in Air in trefoil touching, Ambient Temp. 35˚ C

FOR ALL CABLES THE MAXIMUM CONDUCTOR OPERATING TEMPERATURE IS 90˚C AND LONGER DRUM LENGTHS ARE AVAILABLE TO SPECIFIC CUSTOMER REQUIREMENTS.

A

g =1.2˚C m/W, depth of laying = 0.8m, laid singly

2. Drawn into Ducts, Ground Temp. 30˚C &

depth of laying = 0.8m, laid in trefoil touching

1. Laid Direct, Ground Temp. 30˚C & g =1.2˚C m/W, A

µf/Km

Approximate Capacitance of Cable

Sustained Current Ratings

ohm/Km ohm/Km

ohm/Km

Approximate AC resistance of Conductor at 90˚C

Approximate Impedance at 50 Hertz

ohm/Km

Maximum DC resistance of Conductor at 20˚C

Approximate Reactance at 50 Hertz

m mm

Kg/Km

Approximate Cable Weight

Minimum Bending Radius of Cable (during installation)

mm

Approximate Overall Diameter

Standard Drum Length

mm mm

Kg/Km

Weight of Conductor (Approx)

Outersheath Thickness (Nominal)

mm

Conductor Diameter (Max)

Insulation Thickness (Nominal)

mm2

Nominal Area of Conductor

Table 1

Powerplus

21.50

432

356

365

0.58

0.51

0.19

0.10

0.159

0.124

526

500

1910

26.5

1.8

2.5

1297

14.5

150

26.50

497

392

409

0.63

0.56

0.16

0.10

0.127

0.0991

560

500

2280

28.0

1.8

2.5

1629

16.1

185

34.40

589

449

472

0.69

0.61

0.14

0.10

0.098

0.0754

614

500

2930

31.0

1.9

2.6

2141

18.4

240

42.90

681

498

534

0.71

0.63

0.12

0.09

0.079

0.0601

668

500

3630

33.5

2

2.8

2686

20.6

300

71.50

865

605

668

0.78

0.69

0.10

0.09

0.05

0.0366

814

500

5680

41.0

2.2

3.2

4335

26.6

500

90.10

1021

668

739

0.83

0.73

0.096

0.09

0.0405

0.0283

882

400

7080

44.5

2.3

3.2

5585

29.8

630

115

1168

739

819

0.84

0.79

0.092

0.08

0.039

0.0221

964

300

8610

48.5

2.5

3.2

7346

33.6

800

143

1288

810

890

0.96

0.85

0.086

0.08

0.029

0.0176

1042

250

10500

52.5

2.6

3.2

9160

37.6

1000

1.HCC+ ™ Copper Conductor 2.Semiconductive conductor screen 3.DFI™ XLPE Insulation 4.Semiconductive insulation screen 5.Copper wire screen 6. Tape binder 7. Outer sheath

57.20

773

543

605

0.74

0.65

0.11

0.09

0.063

0.047

744

500

4530

37.5

2.1

3

3421

23.7

400

¢SÓ``````HQhÉ``H

9

ohm/Km ohm/Km ohm/Km µf/Km mA/m

Maximum AC resistance of Conductor at 90˚C

Approximate Reactance at 50 Hertz

Approximate Impedance at 50 Hertz

Maximum Equivalent Star Capacitance of Cable

Approx. Charging Current per phase at Uo = 3.6kV and f = 50Hz

kA

One Second Short Circuit Current Rating of Conductor

3.6/6 (7.2)kV Three Core Copper Conductors XLPE Insulated to IEC 60502-2 Unarmoured

7.15

210

170

198

0.38

0.34

0.5

0.11

0.493

0.387

605

500

2620

40.5

2.2

2.5

1281

8.4

50

10.10

258

202

241

0.43

0.38

0.36

0.10

0.343

0.268

656

500

3350

44.0

2.3

2.5

1845

9.9

70

13.60

316

241

283

0.49

0.43

0.26

0.10

0.247

0.193

716

500

4250

48.0

2.5

2.5

2558

11.6

95

LIMITING CONDUCTOR TEMPERATURE AFTER SHORT CIRCUIT IS

A

3. Laid Singly in Air, Ambient Temp. 35˚ C

FOR ALL CABLES THE MAXIMUM CONDUCTOR OPERATING TEMPERATURE IS 90˚C AND LONGER DRUM LENGTHS ARE AVAILABLE TO SPECIFIC CUSTOMER REQUIREMENTS.

A

g =1.2˚C m/W, depth of laying = 0.8m, laid singly

2. Drawn into Ducts, Ground Temp. 30˚C &

depth of laying = 0.8m, laid singly

1. Laid Direct, Ground Temp. 30˚C & g =1.2˚C m/W, A

ohm/Km

Maximum DC resistance of Conductor at 20˚C

Sustained Current Ratings

m mm

Kg/Km

Approximate Cable Weight

Minimum Bending Radius of Cable (during installation)

mm

Approximate Overall Diameter

Standard Drum Length

mm mm

Kg/Km

Weight of Conductor (Approx)

Outersheath Thickness (Nominal)

mm

Conductor Diameter (Max)

Insulation Thickness (Nominal)

mm2

Cable Data

Nominal Area of Conductor

Table 2

Powerplus

250˚C.

17.20

359

273

321

0.53

0.47

0.22

0.09

0.196

0.153

764

500

5090

51.0

2.6

2.5

3219

13

120

21.50

412

312

358

0.58

0.51

0.18

0.09

0.159

0.124

815

500

6040

54.5

2.7

2.5

3954

14.5

150

26.50

469

349

406

0.63

0.56

0.15

0.09

0.128

0.0991

870

500

7220

58.0

2.8

2.5

4966

16.1

185

42.90

622

443

510

0.71

0.63

0.12

0.08

0.080

0.0601

1047

300

11360

70.0

3.1

2.8

8187

20.6

300

57.20

708

500

566

0.74

0.65

0.1

0.08

0.064

0.047

1169

250

14160

78.0

3.4

3

10428

23.7

400

1.HCC+ ™ Copper Conductor 2.Semiconductive conductor screen 3.DFI™ XLPE Insulation 4.Semiconductive insulation screen 5.Copper tape screen 6. Fillers 7. Tape binder 8. Outer sheath

34.40

545

401

462

0.69

0.61

0.13

0.09

0.099

0.0754

957

400

9130

64.0

3

2.6

6526

18.4

240

¢SÓ``````HQhÉ``H

10

BICC ohm/Km ohm/Km µf/Km mA/m

Approximate AC resistance of Conductor at 90˚C

Approximate Reactance at 50 Hertz

Approximate Impedance at 50 Hertz

Approximate Capacitance of Cable

Approx. Charging Current per phase at Uo = 3.6kV and f = 50Hz

One Second Short Circuit Current Rating of Conductor

Single Core Copper Conductors XLPE Insulated to IEC 60502-2 Aluminium Wire Armoured

3.6/6 (7.2)kV

7.15

230

196

196

0.38

0.34

0.51

0.13

0.494

0.387

387

500

1100

26.0

1.8

1.6

1.2

2.5

420

8.4

50

10.10

285

231

240

0.43

0.38

0.36

0.13

0.342

0.268

417

500

1400

28.0

1.8

1.6

1.2

2.5

605

9.9

70

13.60

345

271

285

0.49

0.43

0.27

0.12

0.247

0.193

438

500

1750

29.5

1.9

1.6

1.2

2.5

839

11.6

95

250˚C.

17.20

396

303

320

0.53

0.47

0.22

0.11

0.196

0.153

461

500

2000

31.0

1.9

1.6

1.2

2.5

1056

13

120

Cable Data

LIMITING CONDUCTOR TEMPERATURE AFTER SHORT CIRCUIT IS

A kA

3. Laid in Air in trefoil touching, Ambient Temp. 35˚ C

FOR ALL CABLES THE MAXIMUM CONDUCTOR OPERATING TEMPERATURE IS 90˚C AND LONGER DRUM LENGTHS ARE AVAILABLE TO SPECIFIC CUSTOMER REQUIREMENTS.

A

g =1.2˚C m/W, depth of laying = 0.8m, laid singly

2. Drawn into Ducts, Ground Temp. 30˚C &

depth of laying = 0.8m, laid in trefoil touching

1. Laid Direct, Ground Temp. 30˚C & g =1.2˚C m/W, A

ohm/Km

Maximum DC resistance of Conductor at 20˚C

Sustained Current Ratings

mm ohm/Km

Minimum Bending Radius of Cable (during installation)

Kg/Km m

Standard Drum Length

Approximate Overall Diameter

Approximate Cable Weight

mm mm

Outersheath Thickness (Nominal)

mm

mm

Insulation Thickness (Nominal)

mm

Kg/Km

Weight of Conductor (Approx)

Armour Wire Diameter (Nominal)

mm

Conductor Diameter (Max)

Separation Sheath Thickness

mm2

Nominal Area of Conductor

Table 3

Powerplus

150

21.50

451

334

365

0.58

0.51

0.19

0.11

0.159

0.124

485

500

2300

32.5

2

1.6

1.2

2.5

1297

14.5

185

26.50

506

365

405

0.63

0.56

0.16

0.11

0.128

0.0991

522

500

2800

35.0

2

2

1.2

2.5

1629

16.1

240

34.40

598

418

463

0.69

0.61

0.14

0.11

0.098

0.0754

563

500

3450

37.5

2.1

2

1.2

2.6

2141

18.4

300

42.90

681

445

516

0.71

0.63

0.12

0.10

0.079

0.0601

605

500

4200

40.5

2.2

2

1.2

2.8

2686

20.6

57.20

773

472

579

0.74

0.65

0.11

0.10

0.063

0.047

660

500

5100

44.0

2.3

2

1.2

3

3421

23.7

400

630

90.10

957

552

676

0.83

0.73

0.096

0.10

0.041

0.0283

786

400

8000

52.5

2.6

2.5

1.4

3.2

5585

29.8

800

115

1049

587

721

0.89

0.79

0.092

0.09

0.038

0.0221

849

300

10000

57.0

2.7

2.5

1.4

3.2

7346

33.6

143

1132

614

765

0.96

0.85

0.086

0.09

0.029

0.0176

915

250

12090

61.0

2.9

2.5

1.5

3.2

9160

37.6

1000

1.HCC+ ™ Copper Conductor 2.Semiconductive conductor screen 3.DFI™ XLPE Insulation 4.Semiconductive insulation screen 5.Copper tape screen 6. Bedding 7. Aluminium Armour 8. Outer sheath

71.50

856

507

632

0.78

0.69

0.10

0.10

0.050

0.0366

732

500

6450

49.0

2.5

2.5

1.3

3.2

4335

26.6

500

¢SÓ``````HQhÉ``H

BICC

11

mm mm

Separation Sheath Thickness

Armour Wire Diameter (Nominal)

ohm/Km ohm/Km µf/Km mA/m

Approximate Reactance at 50 Hertz

Approximate Impedance at 50 Hertz

Approximate Capacitance of Cable

Approx. Charging Current per phase at Uo = 3.6kV and f = 50Hz

kA

One Second Short Circuit Current Rating of Conductor

50

7.15

203

161

187

0.38

0.34

0.5

0.11

0.493

0.387

583

500

4700

49.0

2.5

2.5

1.3

2.5

1281

8.4

70

10.10

248

191

227

0.43

0.38

0.36

0.10

0.343

0.268

626

500

5600

52.5

2.6

2.5

1.4

2.5

1845

9.9

95

13.60

304

227

267

0.49

0.43

0.26

0.10

0.247

0.193

676

500

6700

56.5

2.7

2.5

1.4

2.5

2558

11.6

LIMITING CONDUCTOR TEMPERATURE AFTER SHORT CIRCUIT IS

A

3. Laid singly in Air, Ambient Temp. 35˚ C

FOR ALL CABLES THE MAXIMUM CONDUCTOR OPERATING TEMPERATURE IS 90˚C AND LONGER DRUM LENGTHS ARE AVAILABLE TO SPECIFIC CUSTOMER REQUIREMENTS.

A

g =1.2˚C m/W, depth of laying = 0.8m, laid singly

2. Drawn into ducts, Ground Temp. = 30˚C &

depth of laying = 0.8m, laid singly

1. Laid Direct, Ground Temp. 30˚C & g =1.2˚C m/W, A

ohm/Km

Approximate AC resistance of Conductor at 90˚C

Sustained Current Ratings

mm ohm/Km

Maximum DC resistance of Conductor at 20˚C

Standard Drum Length

Minimum Bending Radius of Cable (during installation)

Kg/Km m

Approximate Cable Weight

mm

mm

Insulation Thickness (Nominal)

mm

Kg/Km

Weight of Conductor (Approx)

Approximate Overall Diameter

mm

Conductor Diameter (Max)

Outersheath Thickness (Nominal)

mm2

Cable Data

Nominal Area of Conductor

3.6/6 (7.2)kV Three Core Copper Conductors XLPE Insulated to IEC 60502-2 Steel Wire Armoured

Table 4

Powerplus

250˚C.

17.20

345

258

303

0.53

0.47

0.22

0.09

0.196

0.153

715

400

7700

60.0

2.8

2.5

1.5

2.5

3219

13

120

150

21.50

396

294

338

0.58

0.51

0.18

0.09

0.159

0.124

758

400

8800

63.5

2.9

2.5

1.6

2.5

3954

14.5

185

240

34.40

524

378

436

0.69

0.61

0.13

0.09

0.099

0.0754

876

250

13500

73.0

3.3

2.5

1.7

2.6

6526

18.4

300

42.90

598

418

481

0.71

0.63

0.12

0.08

0.080

0.0601

967

250

16000

81.0

3.5

3.15

1.8

2.8

8187

20.6

400

57.20

681

472

534

0.74

0.65

0.1

0.08

0.064

0.047

1068

250

19300

89.0

3.8

3.15

2

3

10428

23.7

1.HCC+ ™ Copper Conductor 2.Semiconductive conductor screen 3.DFI™ XLPE Insulation 4.Semiconductive insulation screen 5.Copper tape screen 6. Fillers 7. Tape binder 8. Bedding 9. Galvanised steel wire armour 10. Outer sheath

26.50

451

329

383

0.63

0.56

0.15

0.09

0.128

0.0991

804

300

10400

67.0

3.1

2.5

1.6

2.5

4966

16.1

¢SÓ``````HQhÉ``H

12

BICC mA/m

Approx. Charging Current per phase at Uo = 3.6kV and f = 50Hz

A kA

3. Laid singly in Air, Ambient Temp. 35˚ C

One Second Short Circuit Current Rating of Conductor

Three Core Copper Conductors XLPE Insulated to IEC 60502-2 Steel Tape Armoured

7.15

203

161

187

0.38

0.34

0.50

0.11

0.493

0.387

560

500

3650

47.0

2.4

0.8

1.3

2.5

1281

8.4

50

10.10

248

191

227

0.43

0.38

0.36

0.10

0.343

0.268

604

500

4500

50.5

2.5

0.8

1.4

2.5

1845

9.9

70

13.60

304

227

267

0.49

0.43

0.26

0.10

0.247

0.193

652

500

5590

54.5

2.7

0.8

1.4

2.5

2558

11.6

95

LIMITING CONDUCTOR TEMPERATURE AFTER SHORT CIRCUIT IS

A

g =1.2˚C m/W, depth of laying = 0.8m, laid singly

2. Drawn into Ducts, Ground Temp. = 30˚C &

depth of laying = 0.8m, laid singly

1. Laid Direct, Ground Temp. 30˚C & g =1.2˚C m/W, A

µf/Km

Approximate Capacitance of Cable

Sustained Current Ratings

ohm/Km ohm/Km

ohm/Km

Approximate AC resistance of Conductor at 90˚C

Approximate Impedance at 50 Hertz

ohm/Km

Maximum DC resistance of Conductor at 20˚C

Approximate Reactance at 50 Hertz

m mm

Minimum Bending Radius of Cable (during installation)

Kg/Km

Approximate Cable Weight

Standard Drum Length

mm

Approximate Overall Diameter

mm

Separation Sheath Thickness mm

mm

Insulation Thickness (Nominal)

mm

Kg/Km

Weight of Conductor (Approx)

Outersheath Thickness (Nominal)

mm

Conductor Diameter (Max)

Steel Tape Thickness (Nominal)

mm2

Cable Data

Nominal Area of Conductor

FOR ALL CABLES THE MAXIMUM CONDUCTOR OPERATING TEMPERATURE IS 90˚C AND LONGER DRUM LENGTHS ARE AVAILABLE TO SPECIFIC CUSTOMER REQUIREMENTS.

3.6/6 (7.2)kV

Table 5

Powerplus

250˚C.

17.20

345

258

303

0.53

0.47

0.22

0.09

0.196

0.153

692

500

6510

58.0

2.8

0.8

1.5

2.5

3219

13

120

21.50

396

294

338

0.58

0.51

0.18

0.09

0.159

0.124

736

500

7690

61.5

2.9

0.8

1.6

2.5

3954

14.5

150

26.50

451

329

383

0.63

0.56

0.15

0.09

0.128

0.0991

781

400

9000

65.5

3

0.8

1.6

2.5

4966

16.1

185

42.90

598

418

481

0.71

0.63

0.12

0.08

0.080

0.0601

928

300

14010

77.5

3.4

0.8

1.8

2.8

8187

20.6

300

57.20

681

472

534

0.74

0.65

0.10

0.08

0.064

0.047

1028

200

18330

86.0

3.7

0.8

2

3

10428

23.7

400

1.HCC+ ™ Copper Conductor 2.Semiconductive conductor screen 3.DFI™ XLPE Insulation 4.Semiconductive insulation screen 5.Copper tape screen 6. Fillers 7. Tape binder 8. Bedding 9. Galvanised steel tape armour 10. Outer sheath

34.40

524

378

436

0.69

0.61

0.13

0.09

0.099

0.0754

853

300

11210

71.5

3.2

0.8

1.7

2.6

6526

18.4

240

¢SÓ``````HQhÉ``H

BICC

13

mA/m

Approx. Charging Current per phase at Uo = 6kV and f = 50Hz

kA

One Second Short Circuit Current Rating of Conductor

Single Core Copper Conductors XLPE Insulated to IEC 60502-2 Unarmoured

6/10 (12)kV

7.15

217

200

196

0.47

0.25

0.51

0.13

0.494

0.387

434

500

900

22.0

1.6

3.4

420

8.4

50

10.10

262

240

240

0.55

0.29

0.36

0.12

0.342

0.268

466

500

1150

23.5

1.7

3.4

605

9.9

70

13.60

331

285

285

0.66

0.35

0.27

0.11

0.247

0.193

502

500

1470

25.5

1.7

3.4

839

11.6

95

250˚C.

17.20

382

320

320

0.72

0.38

0.22

0.11

0.196

0.153

532

500

1730

27.0

1.8

3.4

1056

13

120

Cable Data

CONDUCTOR TEMPERATURE AFTER SHORT CIRCUIT IS

A

3. Laid in Air in trefoil touching, Ambient Temp. 35˚ C

FOR ALL CABLES THE MAXIMUM CONDUCTOR OPERATING TEMPERATURE IS 90˚C AND LIMITING LONGER DRUM LENGTHS ARE AVAILABLE TO SPECIFIC CUSTOMER REQUIREMENTS.

A

g =1.2˚C m/W, depth of laying = 0.8m, laid singly

2. Drawn into Ducts, Ground Temp. 30˚C &

depth of laying = 0.8m, laid in trefoil touching

1. Laid Direct, Ground Temp. 30˚C & g =1.2˚C m/W, A

µf/Km

Approximate Capacitance of Cable

Sustained Current Ratings

ohm/Km ohm/Km

Approximate Impedance at 50 Hertz

ohm/Km

Approximate Reactance at 50 Hertz

ohm/Km

Kg/Km

Approximate Cable Weight

Approximate AC resistance of Conductor at 90˚C

mm

Approximate Overall Diameter

Maximum DC resistance of Conductor at 20˚C

mm

Outersheath Thickness (Nominal)

m

mm

Insulation Thickness (Nominal)

mm

Kg/Km

Weight of Conductor (Approx)

Minimum Bending Radius of Cable (during installation)

mm

Conductor Diameter (Max)

Standard Drum Length

mm2

Nominal Area of Conductor

Table 6

Powerplus

21.50

432

356

365

0.77

0.41

0.19

0.11

0.159

0.124

564

500

2040

28.5

1.8

3.4

1297

14.5

150

26.50

497

392

409

0.89

0.47

0.16

0.10

0.128

0.0991

598

500

2460

30.0

1.9

3.4

1629

16.1

185

34.40

589

449

472

0.96

0.51

0.14

0.10

0.098

0.0754

648

500

3070

32.5

2

3.4

2141

18.4

240

42.90

681

498

534

1.0

0.54

0.12

0.10

0.079

0.0601

694

500

3710

35.0

2

3.4

2686

20.6

300

71.50

865

605

668

1.2

0.66

0.10

0.09

0.050

0.0366

822

500

5690

41.5

2.2

3.4

4335

26.6

500

90.10

1021

668

739

1.4

0.74

0.10

0.09

0.041

0.0283

890

500

7150

44.5

2.3

3.4

5585

29.8

630

115

1168

739

819

1.5

0.78

0.09

0.08

0.039

0.0221

972

400

8650

49.0

2.5

3.4

7346

33.6

800

143

1288

810

890

1.5

0.8

0.09

0.08

0.029

0.0176

1056

300

10530

53.0

2.6

3.4

9160

37.6

1000

1.HCC+ ™ Copper Conductor 2.Semiconductive conductor screen 3.DFI™ XLPE Insulation 4.Semiconductive insulation screen 5.Copper wire screen 6. Tape binder 7. Outer sheath

57.20

773

543

605

1.1

0.58

0.11

0.09

0.063

0.047

760

500

4600

38.0

2.1

3.4

3421

23.7

400

¢SÓ``````HQhÉ``H

14

BICC ohm/Km µf/Km mA/m

Approximate Impedance at 50 Hertz

Approximate Capacitance of Cable

Approx. Charging Current per phase at Uo = 6kV and f = 50Hz

kA

One Second Short Circuit Current Rating of Conductor

50

7.15

210

170

198

0.47

0.25

0.51

0.11

0.493

0.387

671

500

3230

45.0

2.4

3.4

1281

8.4

70

10.10

258

202

241

0.55

0.29

0.36

0.11

0.342

0.268

726

500

4070

48.5

2.5

3.4

1845

9.9

95

13.60

316

241

283

0.66

0.35

0.27

0.10

0.247

0.193

782

500

5090

52.5

2.6

3.4

2558

11.6

LIMITING CONDUCTOR TEMPERATURE AFTER SHORT CIRCUIT IS

A

3. Laid singly in Air, Ambient Temp. 35˚ C

FOR ALL CABLES THE MAXIMUM CONDUCTOR OPERATING TEMPERATURE IS 90˚C AND LONGER DRUM LENGTHS ARE AVAILABLE TO SPECIFIC CUSTOMER REQUIREMENTS.

A

g =1.2˚C m/W, depth of laying = 0.8m, laid singly

2. Drawn into Ducts, Ground Temp. 30˚C &

depth of laying = 0.8m, laid singly

1. Laid Direct, Ground Temp. 30˚C & g =1.2˚C m/W,

Three Core Copper Conductors XLPE Insulated to IEC 60502-2 Unarmoured

6/10 (12) kV

ohm/Km

Approximate Reactance at 50 Hertz

A

ohm/Km

Approximate AC resistance of Conductor at 90˚C

Sustained Current Ratings

mm ohm/Km

Maximum DC resistance of Conductor at 20˚C

Standard Drum Length

Minimum Bending Radius of Cable (during installation)

Kg/Km m

Approximate Cable Weight

mm

mm

Insulation Thickness (Nominal)

mm

Kg/Km

Weight of Conductor (Approx)

Approximate Overall Diameter

mm

Conductor Diameter (Max)

Outersheath Thickness (Nominal)

mm2

Cable Data

Nominal Area of Conductor

Table 7

Powerplus

250˚C.

17.20

359

273

321

0.72

0.38

0.22

0.10

0.196

0.153

831

500

6080

55.5

2.7

3.4

3219

13

120

150

21.50

412

312

358

0.77

0.41

0.18

0.09

0.159

0.124

882

500

7070

59.0

2.8

3.4

3954

14.5

185

26.50

469

349

406

0.89

0.47

0.16

0.09

0.128

0.0991

938

500

8400

62.5

2.9

3.4

4966

16.1

300

42.90

622

443

510

1.0

0.54

0.12

0.09

0.080

0.0601

1094

300

12790

73.0

3.2

3.4

8187

20.6

400

57.20

708

500

566

1.1

0.58

0.10

0.08

0.064

0.047

1202

250

14290

80.5

3.5

3.4

10428

23.7

1.HCC+ ™ Copper Conductor 2.Semiconductive conductor screen 3.DFI™ XLPE Insulation 4.Semiconductive insulation screen 5.Copper tape screen 6. Fillers 7. Tape binder 8. Outer sheath

34.40

545

401

462

0.96

0.51

0.13

0.09

0.098

0.0754

1017

400

10570

68.0

3.1

3.4

6526

18.4

240

¢SÓ``````HQhÉ``H

BICC

15

ohm/Km ohm/Km µf/Km mA/m

Approximate AC resistance of Conductor at 90˚C

Approximate Reactance at 50 Hertz

Approximate Impedance at 50 Hertz

Approximate Capacitance of Cable

Approx. Charging Current per phase at Uo = 6kV and f = 50Hz

A kA

3. Laid in Air in trefoil touching, Ambient Temp. 35˚ C

One Second Short Circuit Current Rating of Conductor

7.15

230

196

196

0.47

0.25

0.51

0.14

0.493

0.387

416

500

1200

28.0

1.8

1.6

1.2

3.4

420

8.4

50

10.10

285

231

240

0.55

0.29

0.37

0.13

0.342

0.268

440

500

1600

29.5

1.8

1.6

1.2

3.4

605

9.9

70

13.60

345

271

285

0.66

0.35

0.27

0.12

0.246

0.193

467

500

1950

31.5

1.9

1.6

1.2

3.4

839

11.6

95

17.20

396

303

320

0.72

0.38

0.23

0.12

0.196

0.153

489

500

2270

33.0

1.9

1.6

1.2

3.4

1056

13

120

Cable Data

Single Core Copper Conductors XLPE Insulated to IEC 60502-2 Aluminium Wire Armoured

6/10 (12)kV

FOR ALL CABLES THE MAXIMUM CONDUCTOR OPERATING TEMPERATURE IS 90˚C AND LIMITING CONDUCTOR TEMPERATURE AFTER SHORT CIRCUIT IS 250˚C. LONGER DRUM LENGTHS ARE AVAILABLE TO SPECIFIC CUSTOMER REQUIREMENTS.

A

g =1.2˚C m/W, depth of laying = 0.8m, laid singly

2. Drawn into Ducts, Ground Temp. 30˚C &

depth of laying = 0.8m, laid in trefoil touching

1. Laid Direct, Ground Temp. 30˚C & g =1.2˚C m/W, A

ohm/Km

Maximum DC resistance of Conductor at 20˚C

Sustained Current Ratings

mm ohm/Km

Minimum Bending Radius of Cable (during installation)

Kg/Km m

Standard Drum Length

Approximate Overall Diameter

Approximate Cable Weight

mm mm

Outersheath Thickness (Nominal)

mm

mm

Insulation Thickness (Nominal)

mm

Kg/Km

Weight of Conductor (Approx)

Armour Wire Diameter (Nominal)

mm

Conductor Diameter (Max)

Separation Sheath Thickness

mm2

Nominal Area of Conductor

Table 8

Powerplus

150

21.50

451

334

365

0.77

0.41

0.20

0.12

0.160

0.124

527

500

2690

35.5

2

1.6

1.2

3.4

1297

14.5

185

26.50

506

365

405

0.89

0.47

0.17

0.11

0.127

0.0991

552

500

3100

37.0

2

2

1.2

3.4

1629

16.1

240

34.40

598

418

463

0.96

0.51

0.15

0.11

0.098

0.0754

568

500

3800

39.5

2.1

2

1.2

3.4

2141

18.4

300

400

57.20

773

472

579

1.1

0.58

0.12

0.10

0.063

0.047

692

500

5650

46.5

2.3

2

1.2

3.4

3421

23.7

500

71.50

856

507

632

1.2

0.66

0.11

0.10

0.050

0.0366

738

500

6910

49.5

2.5

2.5

1.3

3.4

4335

26.6

630

90.10

957

552

676

1.4

0.74

0.10

0.10

0.041

0.0283

792

400

8560

53.0

2.6

2.5

1.4

3.4

5585

29.8

800

115

1049

587

721

1.5

0.78

0.10

0.09

0.039

0.0221

855

300

10070

57.0

2.7

2.5

1.4

3.4

7346

33.6

1.HCC+ ™ Copper Conductor 2.Semiconductive conductor screen 3.DFI™ XLPE Insulation 4.Semiconductive insulation screen 5.Copper tape screen 6. Bedding 7. Aluminium Armour 8. Outer sheath

42.90

681

445

516

1.0

0.54

0.13

0.10

0.079

0.0601

623

500

4500

41.5

2.2

2

1.2

3.4

2686

20.6

¢SÓ``````HQhÉ``H

143

1132

614

765

1.5

0.80

0.091

0.09

0.029

0.0176

921

250

12120

61.5

2.9

2.5

1.5

3.4

9160

37.6

1000

16

BICC ohm/Km ohm/Km µf/Km mA/m

Approximate AC resistance of Conductor at 90˚C

Approximate Reactance at 50 Hertz

Approximate Impedance at 50 Hertz

Approximate Capacitance of Cable

Approx. Charging Current per phase at Uo = 6kV and f = 50Hz

kA

One Second Short Circuit Current Rating of Conductor

50

7.15

203

161

187

0.47

0.25

0.51

0.11

0.493

0.387

636

500

5250

53.0

2.6

2.5

1.4

3.4

1281

8.4

70

10.10

248

191

227

0.55

0.29

0.36

0.11

0.342

0.268

678

500

6250

56.5

2.7

2.5

1.4

3.4

1845

9.9

95

13.60

304

227

267

0.66

0.35

0.27

0.10

0.247

0.193

727

500

7350

61.0

2.9

2.5

1.5

3.4

2558

11.6

LIMITING CONDUCTOR TEMPERATURE AFTER SHORT CIRCUIT IS

A

3. Laid singly in Air, Ambient Temp. 35˚ C

FOR ALL CABLES THE MAXIMUM CONDUCTOR OPERATING TEMPERATURE IS 90˚C AND LONGER DRUM LENGTHS ARE AVAILABLE TO SPECIFIC CUSTOMER REQUIREMENTS.

A

g =1.2˚C m/W, depth of laying = 0.8m, laid singly

2. Drawn into ducts, Ground Temp. = 30˚C &

depth of laying = 0.8m, laid singly

1. Laid Direct, Ground Temp. 30˚C & g =1.2˚C m/W, A

ohm/Km

Maximum DC resistance of Conductor at 20˚C

Sustained Current Ratings

mm ohm/Km

Minimum Bending Radius of Cable (during installation)

Kg/Km m

Standard Drum Length

Approximate Overall Diameter

Approximate Cable Weight

mm mm

Outersheath Thickness (Nominal)

mm

mm

Insulation Thickness (Nominal)

mm

Kg/Km

Weight of Conductor (Approx)

Armour Wire Diameter (Nominal)

mm

Conductor Diameter (Max)

Separation Sheath Thickness

mm2

Cable Data

Nominal Area of Conductor

Three Core Copper Conductors XLPE Insulated to IEC 60502-2 Steel Wire Armoured

6/10 (12)kV

Table 9

Powerplus

250˚C.

17.20

345

258

303

0.72

0.38

0.22

0.10

0.196

0.153

768

400

8500

64.0

3

2.5

1.6

3.4

3219

13

120

150

21.50

396

294

338

0.77

0.41

0.18

0.09

0.159

0.124

810

300

9550

67.5

3.1

2.5

1.6

3.4

3954

14.5

185

240

34.40

524

378

436

0.96

0.51

0.13

0.09

0.098

0.0754

940

250

14250

79.0

3.4

3.15

1.8

3.4

6526

18.4

300

42.90

598

418

481

1.0

0.54

0.12

0.09

0.078

0.0601

1002

200

16600

83.5

3.6

3.15

1.9

3.4

8187

20.6

400

57.20

681

472

534

1.1

0.58

0.10

0.08

0.064

0.047

1092

200

19750

91.0

3.8

3.15

2

3.4

10428

23.7

1.HCC+ ™ Copper Conductor 2.Semiconductive conductor screen 3.DFI™ XLPE Insulation 4.Semiconductive insulation screen 5.Copper tape screen 6. Fillers 7. Tape binder 8. Bedding 9. Galvanised steel wire armour 10. Outer sheath

26.50

451

329

383

0.89

0.47

0.16

0.09

0.128

0.0991

857

300

11000

71.5

3.2

2.5

1.7

3.4

4966

16.1

¢SÓ``````HQhÉ``H

BICC

17

mA/m

Approx. Charging Current per phase at Uo = 6kV and f = 50Hz

A kA

3. Laid singly in Air, Ambient Temp. 35˚ C

One Second Short Circuit Current Rating of Conductor

7.15

203

161

187

0.47

0.25

0.51

0.11

0.493

0.387

612

500

4050

51.0

2.6

0.8

1.4

3.4

1281

8.4

50

10.10

248

191

227

0.55

0.29

0.36

0.11

0.342

0.268

655

500

4910

55.0

2.7

0.8

1.4

3.4

1845

9.9

70

13.60

304

227

267

0.66

0.35

0.27

0.10

0.247

0.193

704

500

6010

59.0

2.8

0.8

1.5

3.4

2558

11.6

95

17.20

345

258

303

0.72

0.38

0.22

0.10

0.196

0.153

744

500

7030

62.0

2.9

0.8

1.6

3.4

3219

13

120

FOR ALL CABLES THE MAXIMUM CONDUCTOR OPERATING TEMPERATURE IS 90˚C AND LIMITING CONDUCTOR TEMPERATURE AFTER SHORT CIRCUIT IS 250˚C. LONGER DRUM LENGTHS ARE AVAILABLE TO SPECIFIC CUSTOMER REQUIREMENTS.

A

g =1.2˚C m/W, depth of laying = 0.8m, laid singly

2. Drawn into Ducts, Ground Temp. = 30˚C &

depth of laying = 0.8m, laid singly

1. Laid Direct, Ground Temp. 30˚C & g =1.2˚C m/W, A

µf/Km

Approximate Capacitance of Cable

Sustained Current Ratings

ohm/Km ohm/Km

ohm/Km

Approximate AC resistance of Conductor at 90˚C

Approximate Impedance at 50 Hertz

ohm/Km

Maximum DC resistance of Conductor at 20˚C

Approximate Reactance at 50 Hertz

m

Approximate Cable Weight

mm

Kg/Km

Approximate Overall Diameter

Minimum Bending Radius of Cable (during installation)

mm

Outersheath Thickness (Nominal)

Standard Drum Length

mm mm

Steel Tape Thickness (Nominal)

mm mm

Kg/Km

Weight of Conductor (Approx)

Separation Sheath Thickness

mm

Conductor Diameter (Max)

Insulation Thickness (Nominal)

mm2

Cable Data

Nominal Area of Conductor

Three Core Copper Conductors XLPE Insulated to IEC 60502-2 Steel Tape Armoured

6/10 (12)kV

Table 10

Powerplus

21.50

396

294

338

0.77

0.41

0.18

0.09

0.159

0.124

787

400

8120

66.0

3

0.8

1.6

3.4

3954

14.5

150

34.40

524

378

436

0.96

0.51

0.13

0.09

0.098

0.0754

899

300

11810

75.0

3.3

0.8

1.8

3.4

6526

18.4

240

42.90

598

418

481

1.0

0.54

0.12

0.08

0.078

0.0601

962

250

14190

80.5

3.5

0.8

1.9

3.4

8187

20.6

300

57.20

681

472

534

1.1

0.58

0.10

0.064

0.064

0.047

1051

200

18680

88.0

3.7

0.8

2

3.4

10428

23.7

400

1.HCC+ ™ Copper Conductor 2.Semiconductive conductor screen 3.DFI™ XLPE Insulation 4.Semiconductive insulation screen 5.Copper tape screen 6. Fillers 7. Tape binder 8. Bedding 9. Galvanised steel tape armour 10. Outer sheath

26.50

451

329

383

0.89

0.47

0.16

0.09

0.128

0.0991

833

400

9530

70.0

3.1

0.8

1.7

3.4

4966

16.1

185

¢SÓ``````HQhÉ``H

18

BICC ohm/Km ohm/Km µf/Km mA/m

Approximate Reactance at 50 Hertz

Approximate Impedance at 50 Hertz

Approximate Capacitance of Cable

Approx. Charging Current per phase at Uo = 8.7kV and f = 50Hz

One Second Short Circuit Current Rating of Conductor

Single Core Copper Conductors XLPE Insulated to IEC 60502-2 Unarmoured

8.7/15 (17.5)kV

7.15

217

200

196

0.60

0.22

0.51

0.13

0.494

0.387

482

500

990

24.5

1.8

4.5

420

8.4

50

10.10

262

240

240

0.68

0.25

0.36

0.13

0.342

0.268

514

500

1270

26.0

1.8

4.5

605

9.9

70

13.60

331

285

285

0.77

0.28

0.27

0.12

0.247

0.193

550

500

1580

27.5

1.8

4.5

839

11.6

95

250˚C.

17.20

382

320

320

0.85

0.31

0.23

0.11

0.196

0.153

580

500

1850

29.0

1.9

4.5

1056

13

120

Cable Data

LIMITING CONDUCTOR TEMPERATURE AFTER SHORT CIRCUIT IS

A kA

3. Laid in Air in trefoil touching, Ambient Temp. 35˚ C

FOR ALL CABLES THE MAXIMUM CONDUCTOR OPERATING TEMPERATURE IS 90˚C AND LONGER DRUM LENGTHS ARE AVAILABLE TO SPECIFIC CUSTOMER REQUIREMENTS.

A

g =1.2˚C m/W, depth of laying = 0.8m, laid singly

2. Drawn into Ducts, Ground Temp. 30˚C &

depth of laying = 0.8m, laid in trefoil touching

1. Laid Direct, Ground Temp. 30˚C & g =1.2˚C m/W, A

ohm/Km

Approximate AC resistance of Conductor at 90˚C

Sustained Current Ratings

mm ohm/Km

Maximum DC resistance of Conductor at 20˚C

Standard Drum Length

Minimum Bending Radius of Cable (during installation)

Kg/Km m

Approximate Cable Weight

mm

mm

Insulation Thickness (Nominal)

mm

Kg/Km

Weight of Conductor (Approx)

Approximate Overall Diameter

mm

Conductor Diameter (Max)

Outersheath Thickness (Nominal)

mm2

Nominal Area of Conductor

Table 11

Powerplus

150

21.50

432

356

365

0.90

0.33

0.19

0.11

0.159

0.124

612

500

2210

31.0

1.9

4.5

1297

14.5

185

26.50

497

392

409

1.0

0.36

0.17

0.11

0.128

0.0991

645

500

2620

32.5

2

4.5

1629

16.1

240

34.40

589

449

472

1.1

0.41

0.14

0.10

0.098

0.0754

696

500

3210

35.0

2

4.5

2141

18.4

300

42.90

681

498

534

1.2

0.44

0.13

0.10

0.079

0.0601

742

500

3870

37.5

2.1

4.5

2686

20.6

500

71.50

865

605

668

1.5

0.54

0.11

0.09

0.051

0.0366

870

500

5880

43.5

2.3

4.5

4335

26.6

630

90.10

1021

668

739

1.6

0.59

0.099

0.09

0.041

0.0283

938

500

7350

47.0

2.4

4.5

5585

29.8

800

115

1168

739

819

1.9

0.68

0.096

0.09

0.040

0.0221

1020

400

8830

51.0

2.5

4.5

7346

33.6

143

1288

810

890

2.0

0.72

0.091

0.08

0.030

0.0176

1106

300

10760

55.5

2.7

4.5

9160

37.6

1000

1.HCC+ ™ Copper Conductor 2.Semiconductive conductor screen 3.DFI™ XLPE Insulation 4.Semiconductive insulation screen 5.Copper wire screen 6. Tape binder 7. Outer sheath

57.20

773

543

605

1.3

0.49

0.12

0.10

0.063

0.047

808

500

4790

40.5

2.2

4.5

3421

23.7

400

¢SÓ``````HQhÉ``H

BICC

19

50.0

ohm/Km ohm/Km µf/Km mA/m

Approximate Reactance at 50 Hertz

Approximate Impedance at 50 Hertz

Approximate Capacitance of Cable

Approx. Charging Current per phase at Uo = 8.7kV and f = 50Hz

kA

One Second Short Circuit Current Rating of Conductor

Three Core Copper Conductors XLPE Insulated to IEC 60502-2 Unarmoured

8.7/15 (17.5)kV

7.15

210

170

198

0.60

0.12

0.493

0.387

10.10

258

202

241

0.68

0.25

0.36

0.11

0.342

0.268

800

500

3130

53.5

2.6

4.5

1845

9.9

70

13.60

316

241

283

0.77

0.28

0.27

0.11

0.247

0.193

858

500

4050

57.5

2.8

4.5

2558

11.6

95

LIMITING CONDUCTOR TEMPERATURE AFTER SHORT CIRCUIT IS

A

3. Laid singly in Air, Ambient Temp. 35˚ C

FOR ALL CABLES THE MAXIMUM CONDUCTOR OPERATING TEMPERATURE IS 90˚C AND LONGER DRUM LENGTHS ARE AVAILABLE TO SPECIFIC CUSTOMER REQUIREMENTS.

A

g =1.2˚C m/W, depth of laying = 0.8m, laid singly

2. Drawn into Ducts, Ground Temp. 30˚C &

depth of laying = 0.8m, laid singly

1. Laid Direct, Ground Temp. 30˚C & g =1.2˚C m/W, A

0.22

ohm/Km

Approximate AC resistance of Conductor at 90˚C

Sustained Current Ratings

0.51

ohm/Km

Maximum DC resistance of Conductor at 20˚C

500 749

m

2400

mm

Kg/Km

Approximate Cable Weight

Minimum Bending Radius of Cable (during installation)

mm

Approximate Overall Diameter

2.5

4.5

1281

8.4

50

Standard Drum Length

mm mm

Kg/Km

Weight of Conductor (Approx)

Outersheath Thickness (Nominal)

mm

Conductor Diameter (Max)

Insulation Thickness (Nominal)

mm2

Cable Data

Nominal Area of Conductor

Table 12

Powerplus

250˚C.

17.20

359

273

321

0.85

0.31

0.22

0.10

0.196

0.153

908

500

4910

60.5

2.9

4.5

3219

13

120

21.50

412

312

358

0.90

0.33

0.19

0.10

0.159

0.124

959

500

5830

64.0

3

4.5

3954

14.5

150

26.50

469

349

406

1.0

0.36

0.16

0.10

0.128

0.0991

1014

400

7090

68.0

3.1

4.5

4966

16.1

185

42.90

622

443

510

1.2

0.44

0.12

0.09

0.079

0.0601

1170

300

11030

78.0

3.4

4.5

8187

20.6

300

57.20

708

500

566

1.3

0.49

0.11

0.09

0.064

0.047

1277

250

14980

85.5

3.6

4.5

10428

23.7

400

1.HCC+ ™ Copper Conductor 2.Semiconductive conductor screen 3.DFI™ XLPE Insulation 4.Semiconductive insulation screen 5.Copper tape screen 6. Fillers 7. Tape binder 8. Outer sheath

34.40

545

401

462

1.1

0.41

0.14

0.09

0.098

0.0754

1094

300

9050

73.0

3.2

4.5

6526

18.4

240

¢SÓ``````HQhÉ``H

20

BICC ohm/Km ohm/Km ohm/Km µf/Km mA/m

Approximate AC resistance of Conductor at 90˚C

Approximate Reactance at 50 Hertz

Approximate Impedance at 50 Hertz

Approximate Capacitance of Cable

Approx. Charging Current per phase at Uo = 8.7kV and f = 50Hz

kA

One Second Short Circuit Current Rating of Conductor

Single Core Copper Conductors XLPE Insulated to IEC 60502-2 Aluminium Wire Armoured

8.7/15 (17.5)kV

7.15

230

196

196

0.60

0.22

0.51

0.14

0.494

0.387

452

500

1400

30.5

1.9

1.6

1.2

4.5

420

8.4

50

10.10

285

231

240

0.68

0.25

0.36

0.14

0.342

0.268

476

500

1650

32.0

2

1.6

1.2

4.5

605

9.9

70

13.60

345

271

285

0.77

0.28

0.27

0.13

0.247

0.193

515

500

2050

34.5

2

2

1.2

4.5

839

11.6

95

250˚C.

17.20

396

303

320

0.85

0.31

0.20

0.12

0.196

0.153

537

500

2400

36.0

2.1

2

1.2

4.5

1056

13

120

Cable Data

LIMITING CONDUCTOR TEMPERATURE AFTER SHORT CIRCUIT IS

A

3. Laid in Air in trefoil touching, Ambient Temp. 35˚ C

FOR ALL CABLES THE MAXIMUM CONDUCTOR OPERATING TEMPERATURE IS 90˚C AND LONGER DRUM LENGTHS ARE AVAILABLE TO SPECIFIC CUSTOMER REQUIREMENTS.

A

g =1.2˚C m/W, depth of laying = 0.8m, laid singly

2. Drawn into Ducts, Ground Temp. 30˚C &

depth of laying = 0.8m, laid in trefoil touching

1. Laid Direct, Ground Temp. 30˚C & g =1.2˚C m/W, A

ohm/Km

Maximum DC resistance of Conductor at 20˚C

Sustained Current Ratings

m

Approximate Cable Weight

mm

Kg/Km

Approximate Overall Diameter

Minimum Bending Radius of Cable (during installation)

mm

Outersheath Thickness (Nominal)

Standard Drum Length

mm mm

Armour Wire Diameter (Nominal)

mm mm

Kg/Km

Weight of Conductor (Approx)

Separation Sheath Thickness

mm

Conductor Diameter (Max)

Insulation Thickness (Nominal)

mm2

Nominal Area of Conductor

Table 13

Powerplus

21.50

451

334

365

0.90

0.33

0.19

0.12

0.159

0.124

561

500

2750

37.5

2.1

2

1.2

4.5

1297

14.5

150

26.50

506

365

405

1.0

0.36

0.16

0.12

0.127

0.0991

587

500

3300

39.5

2.2

2

1.2

4.5

1629

16.1

185

34.40

598

418

463

1.1

0.41

0.14

0.11

42.90

681

445

516

1.2

0.44

0.13

0.11

0.047

728

500

5500

48.5

2.5

2.5

1.3

4.5

3421

23.7

400

0.0366

776

500

6750

52.0

2.6

2.5

1.3

4.5

4335

26.6

500

71.50

856

507

632

1.5

0.54

0.11

0.10

90.10

957

552

676

1.6

0.59

0.11

0.10

0.039

0.0283

828

400

8250

55.5

2.7

2.5

1.4

4.5

5585

29.8

630

115

1049

587

721

1.9

0.68

0.09

0.09

0.029

0.0221

893

300

10350

59.5

2.8

2.5

1.5

4.5

7346

33.6

800

143

1132

614

765

2.0

0.72

0.09

0.09

0.0176

959

300

12450

64.0

3

2.5

1.6

4.5

9160

37.6

1000

1.HCC+ ™ Copper Conductor 2.Semiconductive conductor screen 3.DFI™ XLPE Insulation 4.Semiconductive insulation screen 5.Copper tape screen 6. Bedding 7. Aluminium Armour 8. Outer sheath

57.20

773

472

579

1.3

0.49

0.11

0.11

0.0630.050 0.041

0.0601

660

500

4450

44.0

2.3

2

1.2

4.5

2686

20.6

300

0.098 0.078

0.0754

624

500

3850

42.0

2.3

2

1.2

4.5

2141

18.4

240

¢SÓ``````HQhÉ``H

BICC

21

ohm/Km ohm/Km µf/Km mA/m

Approximate AC resistance of Conductor at 90˚C

Approximate Reactance at 50 Hertz

Approximate Impedance at 50 Hertz

Approximate Capacitance of Cable

Approx. Charging Current per phase at Uo = 8.7kV and f = 50Hz

A kA

3. Laid singly in Air, Ambient Temp. 35˚ C

One Second Short Circuit Current Rating of Conductor

Three Core Copper Conductors XLPE Insulated to IEC 60502-2 Steel Wire Armoured

50

7.15

203

161

187

0.60

0.22

0.51

0.12

0.493

0.387

698

500

5950

58.5

2.8

2.5

1.5

4.5

1281

8.4

70

10.10

248

191

227

0.68

0.25

0.36

0.11

0.342

0.268

742

500

6950

62.0

2.9

2.5

1.5

4.5

1845

9.9

95

13.60

304

227

267

0.77

0.28

0.27

0.11

0.247

0.193

791

400

8150

66.0

3

2.5

1.6

4.5

2558

11.6

LIMITING CONDUCTOR TEMPERATURE AFTER SHORT CIRCUIT IS

A

g =1.2˚C m/W, depth of laying = 0.8m, laid singly

2. Drawn into ducts, Ground Temp. = 30˚C &

depth of laying = 0.8m, laid singly

1. Laid Direct, Ground Temp. 30˚C & g =1.2˚C m/W, A

ohm/Km

Maximum DC resistance of Conductor at 20˚C

Sustained Current Ratings

mm ohm/Km

Minimum Bending Radius of Cable (during installation)

Kg/Km m

Standard Drum Length

Approximate Overall Diameter

Approximate Cable Weight

mm mm

Outersheath Thickness (Nominal)

mm

mm

Insulation Thickness (Nominal)

mm

Kg/Km

Weight of Conductor (Approx)

Armour Wire Diameter (Nominal)

mm

Conductor Diameter (Max)

Separation Sheath Thickness

mm2

Nominal Area of Conductor

Cable Data

FOR ALL CABLES THE MAXIMUM CONDUCTOR OPERATING TEMPERATURE IS 90˚C AND LONGER DRUM LENGTHS ARE AVAILABLE TO SPECIFIC CUSTOMER REQUIREMENTS.

8.7/15 (17.5)kV

Table 14

Powerplus

250˚C.

17.20

345

258

303

0.85

0.31

0.22

0.10

0.196

0.153

832

400

9150

69.5

3.2

2.5

1.7

4.5

3219

13

120

150

21.50

396

294

338

0.90

0.33

0.19

0.10

0.159

0.124

874

300

11190

73.0

3.3

2.5

1.7

4.5

3954

14.5

240

34.40

524

378

436

1.1

0.41

0.14

0.09

0.098

0.0754

1003

250

15000

84.0

3.6

3.15

1.9

4.5

6526

18.4

300

42.90

598

418

481

1.2

0.44

0.12

0.09

0.079

0.0601

1066

200

17450

89.0

3.8

3.15

2

4.5

8187

20.6

400

57.20

681

472

534

1.3

0.49

0.11

0.09

0.064

0.047

1154

200

20800

97.0

4

3.15

2.1

4.5

10428

23.7

1.HCC+ ™ Copper Conductor 2.Semiconductive conductor screen 3.DFI™ XLPE Insulation 4.Semiconductive insulation screen 5.Copper tape screen 6. Fillers 7. Tape binder 8. Bedding 9. Galvanised steel wire armour 10. Outer sheath

26.50

451

329

383

1.0

0.36

0.16

0.10

0.128

0.0991

936

250

12750

78.0

3.4

3.15

1.8

4.5

4966

16.1

185

¢SÓ``````HQhÉ``H

ohm/Km ohm/Km ohm/Km µf/Km mA/m

Approximate AC resistance of Conductor at 90˚C

Approximate Reactance at 50 Hertz

Approximate Impedance at 50 Hertz

Approximate Capacitance of Cable

Approx. Charging Current per phase at Uo = 8.7kV and f = 50Hz

8.4

7.15

kA

Three Core Copper Conductors XLPE Insulated to IEC 60502-2 Steel Tape Armoured

8.7/15 (17.5)kV

FOR ALL CABLES THE MAXIMUM CONDUCTOR OPERATING TEMPERATURE IS 90˚C AND LONGER DRUM LENGTHS ARE AVAILABLE TO SPECIFIC CUSTOMER REQUIREMENTS.

10.10

248

191

227

0.68

0.25

0.36

0.11

0.342

0.268

719

500

5510

60.0

2.9

0.8

1.05

4.5

1845

9.9

70

13.60

304

227

267

0.77

0.28

0.27

0.11

0.247

0.193

768

500

6620

64.0

3

0.8

1.6

4.5

2558

11.6

95

LIMITING CONDUCTOR TEMPERATURE AFTER SHORT CIRCUIT IS

A

One Second Short Circuit Current Rating of Conductor

203

A

3. Laid singly in Air, Ambient Temp. 35˚ C

161

187

0.60

0.22

0.51

0.12

0.493

0.387

676

500

4650

56.5

2.7

0.8

1.5

4.5

1281

g =1.2˚C m/W, depth of laying = 0.8m, laid singly

2. Drawn into Ducts, Ground Temp. = 30˚C &

depth of laying = 0.8m, laid singly

1. Laid Direct, Ground Temp. 30˚C & g =1.2˚C m/W, A

ohm/Km

Maximum DC resistance of Conductor at 20˚C

Sustained Current Ratings

m

Approximate Cable Weight

mm

Kg/Km

Approximate Overall Diameter

Minimum Bending Radius of Cable (during installation)

mm

Outersheath Thickness (Nominal)

Standard Drum Length

mm mm

Steel Tape Thickness (Nominal)

mm mm

Separation Sheath Thickness

Kg/Km

Weight of Conductor (Approx)

Insulation Thickness (Nominal)

mm

Conductor Diameter (Max)

50

Cable Data

mm2

Table 15

BICC

Nominal Area of Conductor

Powerplus

22 250˚C.

17.20

345

258

303

0.85

0.31

0.22

0.10

0.196

0.153

808

500

7660

67.5

3.1

0.8

1.7

4.5

3219

13

120

21.50

396

294

338

0.90

0.33

0.19

0.10

0.159

0.124

851

400

8780

71.0

3.2

0.8

1.7

4.5

3954

14.5

150

34.40

524

378

436

1.1

0.41

0.14

0.09

0.098

0.0754

962

300

12580

80.5

3.5

0.8

1.9

4.5

6526

18.4

240

42.90

598

418

481

1.2

0.44

0.12

0.09

0.079

0.0601

1026

250

16010

85.5

3.6

0.8

2

4.5

8187

20.6

300

57.20

681

472

534

1.3

0.49

0.11

0.09

0.064

0.047

1115

200

19720

93.0

3.9

0.8

2.1

4.5

10428

23.7

400

1.HCC+ ™ Copper Conductor 2.Semiconductive conductor screen 3.DFI™ XLPE Insulation 4.Semiconductive insulation screen 5.Copper tape screen 6. Fillers 7. Tape binder 8. Bedding 9. Galvanised steel tape armour 10. Outer sheath

26.50

451

329

383

1.0

0.36

0.16

0.10

0.128

0.0991

896

300

10320

75.0

3.3

0.8

1.8

4.5

4966

16.1

185

¢SÓ``````HQhÉ``H

BICC

23

mA/m

Approx. Charging Current per phase at Uo = 12kV and F = 50Hz

kA

One Second Short Circuit Current Rating of Conductor

Single Core Copper Conductors XLPE Insulated to IEC 60502-2 Unarmoured

12/20 (24)kV

7.15

225

200

196

0.68

0.18

0.51

0.14

0.494

0.387

526

500

1100

26.3

1.8

5.5

420

8.4

50

10.10

276

240

240

0.79

0.21

0.37

0.13

0.342

0.268

558

500

1380

27.9

1.8

5.5

605

9.9

70

13.60

331

285

285

0.87

0.23

0.28

0.12

0.247

0.193

594

500

1690

29.7

1.9

5.5

839

11.6

95

250˚C.

17.20

391

320

320

0.94

0.25

0.23

0.12

0.196

0.153

624

500

2030

31.2

1.9

5.5

1056

13

120

Cable Data

LIMITING CONDUCTOR TEMPERATURE AFTER SHORT CIRCUIT IS

A

3. Laid in Air in trefoil touching, Ambient Temp. 35˚ C

FOR ALL CABLES THE MAXIMUM CONDUCTOR OPERATING TEMPERATURE IS 90˚C AND LONGER DRUM LENGTHS ARE AVAILABLE TO SPECIFIC CUSTOMER REQUIREMENTS.

A

g =1.2˚C m/W, depth of laying = 0.8m, laid singly

2. Drawn into Ducts, Ground Temp. 30˚C &

depth of laying = 0.8m, laid in trefoil touching

1. Laid Direct, Ground Temp. 30˚C & g =1.2˚C m/W, A

µf/Km

Approximate Capacitance of Cable

Sustained Current Ratings

ohm/Km ohm/Km

ohm/Km

Approximate AC resistance of Conductor at 90˚C

Approximate Impedance at 50 Hertz

ohm/Km

Maximum DC resistance of Conductor at 20˚C

Approximate Reactance at 50 Hertz

m mm

Kg/Km

Approximate Cable Weight

Minimum Bending Radius of Cable (during installation)

mm

Approximate Overall Diameter

Standard Drum Length

mm mm

Kg/Km

Weight of Conductor (Approx)

Outersheath Thickness (Nominal)

mm

Conductor Diameter (Max)

Insulation Thickness (Nominal)

mm2

Nominal Area of Conductor

Table 16

Powerplus

21.50

446

360

365

1.0

0.27

0.20

0.12

0.159

0.124

656

500

2370

32.8

2

5.5

1297

14.5

150

26.50

506

396

409

1.1

0.29

0.17

0.11

0.128

0.0991

690

500

2750

34.5

2

5.5

1629

16.1

185

34.40

598

463

472

1.2

0.32

0.15

0.11

0.098

0.0754

738

500

3350

36.9

2.1

5.5

2141

18.4

240

42.90

681

507

534

1.3

0.35

0.13

0.10

0.079

0.0601

786

500

4060

39.3

2.2

5.5

2686

20.6

300

71.50

902

623

676

1.6

0.43

0.11

0.10

0.051

0.0366

914

500

6170

45.7

2.4

5.5

4335

26.6

500

90.10

1040

694

757

1.8

0.48

0.10

0.10

0.041

0.0283

962

500

7690

49.1

2.5

5.5

5585

29.8

630

115

1178

757

828

2.0

0.53

0.10

0.09

0.040

0.0221

1062

400

9040

53.1

2.6

5.5

7346

33.6

800

143

1306

819

899

2.2

0.58

0.09

0.09

0.030

0.0176

1148

300

10950

57.4

2.7

5.5

9160

37.6

1000

1.HCC+ ™ Copper Conductor 2.Semiconductive conductor screen 3.DFI™ XLPE Insulation 4.Semiconductive insulation screen 5.Copper wire screen 6. Tape binder 7. Outer sheath

57.20

782

561

614

1.5

0.39

0.12

0.10

0.063

0.047

852

500

4910

42.6

2.3

5.5

3421

23.7

400

¢SÓ``````HQhÉ``H

24

BICC ohm/Km ohm/Km µf/Km mA/m

Approximate Reactance at 50 Hertz

Approximate Impedance at 50 Hertz

Approximate Capacitance of Cable

Approx. Charging Current per phase at Uo = 12kV and F = 50Hz

kA

One Second Short Circuit Current Rating of Conductor

12/20 (24)kV Three Core Copper Conductors XLPE Insulated to IEC 60502-2 Unarmoured

50

7.15

215

175

198

0.68

0.18

0.51

0.12

0.493

0.387

818

500

4100

54.5

2.7

5.5

1281

8.4

70

10.10

263

212

241

0.79

0.21

0.36

0.12

0.342

0.268

869

500

5010

58.0

2.8

5.5

1845

9.9

95

13.60

316

245

279

0.87

0.23

0.27

0.11

0.247

0.193

929

500

6080

62.0

2.9

5.5

2558

11.6

LIMITING CONDUCTOR TEMPERATURE AFTER SHORT CIRCUIT IS

A

3. Laid singly in Air, Ambient Temp. 35˚ C

FOR ALL CABLES THE MAXIMUM CONDUCTOR OPERATING TEMPERATURE IS 90˚C AND LONGER DRUM LENGTHS ARE AVAILABLE TO SPECIFIC CUSTOMER REQUIREMENTS.

A

g =1.2˚C m/W, depth of laying = 0.8m, laid singly

2. Drawn into Ducts, Ground Temp. 30˚C &

depth of laying = 0.8m, laid singly

1. Laid Direct, Ground Temp. 30˚C & g =1.2˚C m/W, A

ohm/Km

Approximate AC resistance of Conductor at 90˚C

Sustained Current Ratings

mm ohm/Km

Maximum DC resistance of Conductor at 20˚C

Standard Drum Length

Minimum Bending Radius of Cable (during installation)

Kg/Km m

Approximate Cable Weight

mm

mm

Insulation Thickness (Nominal)

mm

Kg/Km

Weight of Conductor (Approx)

Approximate Overall Diameter

mm

Conductor Diameter (Max)

Outersheath Thickness (Nominal)

mm2

Cable Data

Nominal Area of Conductor

Table 17

Powerplus

250˚C.

17.20

364

283

316

0.94

0.25

0.22

0.11

0.196

0.153

977

500

7090

65.5

3

5.5

3219

13

120

150

21.50

412

316

354

1.0

0.27

0.19

0.10

0.159

0.124

1028

500

8210

68.5

3.1

5.5

3954

14.5

185

26.50

469

358

396

1.1

0.29

0.16

0.10

0.128

0.0991

1083

400

9620

72.5

3.2

5.5

4966

16.1

300

42.90

622

453

500

1.3

0.35

0.12

0.09

0.079

0.0601

1239

300

14140

83.0

3.5

5.5

8187

20.6

400

57.20

708

510

557

1.5

0.39

0.11

0.09

0.063

0.047

1346

200

15700

89.0

3.8

5.5

10428

23.7

1.HCC+ ™ Copper Conductor 2.Semiconductive conductor screen 3.DFI™ XLPE Insulation 4.Semiconductive insulation screen 5.Copper tape screen 6. Fillers 7. Tape binder 8. Outer sheath

34.40

545

406

453

1.2

0.32

0.14

0.10

0.098

0.0754

1163

300

11830

77.5

3.4

5.5

6526

18.4

240

¢SÓ``````HQhÉ``H

BICC

25

µf/Km mA/m

Approximate Capacitance of Cable

Approx. Charging Current per phase at Uo = 12kV and F = 50Hz

One Second Short Circuit Current Rating of Conductor

Single Core Copper Conductors XLPE Insulated to IEC 60502-2 Aluminium Wire Armoured

12/20 (24)kV

7.15

239

187

196

0.68

0.18

0.52

0.15

0.494

0.387

483

500

1500

32.5

2

1.6

1.2

5.5

420

8.4

50

10.10

294

231

240

0.79

0.21

0.37

0.14

0.342

0.268

519

500

1800

35.0

2.1

2

1.2

5.5

605

9.9

70

13.60

350

271

285

0.87

0.23

0.28

0.13

0.247

0.193

548

500

2200

36.5

2.1

2

1.2

5.5

839

11.6

95

250˚C.

17.20

405

303

320

0.94

0.25

0.23

0.13

0.196

0.153

570

500

2500

38.0

2.2

2

1.2

5.5

1056

13

120

Cable Data

LIMITING CONDUCTOR TEMPERATURE AFTER SHORT CIRCUIT IS

A kA

3. Laid in Air in trefoil touching, Ambient Temp. 35˚ C

FOR ALL CABLES THE MAXIMUM CONDUCTOR OPERATING TEMPERATURE IS 90˚C AND LONGER DRUM LENGTHS ARE AVAILABLE TO SPECIFIC CUSTOMER REQUIREMENTS.

A

g =1.2˚C m/W, depth of laying = 0.8m, laid singly

2. Drawn into Ducts, Ground Temp. 30˚C &

depth of laying = 0.8m, laid in trefoil touching

1. Laid Direct, Ground Temp. 30˚C & g =1.2˚C m/W, A

ohm/Km

Approximate Impedance at 50 Hertz

Sustained Current Ratings

ohm/Km ohm/Km

Approximate Reactance at 50 Hertz

Maximum DC resistance of Conductor at 20˚C

Approximate AC resistance of Conductor at 90˚C

mm ohm/Km

Minimum Bending Radius of Cable (during installation)

Kg/Km m

Standard Drum Length

Approximate Overall Diameter

Approximate Cable Weight

mm mm

Outersheath Thickness (Nominal)

mm

mm

Insulation Thickness (Nominal)

mm

Kg/Km

Weight of Conductor (Approx)

Armour Wire Diameter (Nominal)

mm

Conductor Diameter (Max)

Separation Sheath Thickness

mm2

Nominal Area of Conductor

Table 18

Powerplus

150

21.50

451

329

365

1.0

0.27

0.2

0.12

0.159

0.124

593

500

2850

39.5

2.2

2

1.2

5.5

1297

14.5

185

26.50

515

356

401

1.1

0.29

0.17

0.12

0.127

0.0991

618

500

3250

41.5

2.3

2

1.2

5.5

1629

16.1

240

300

0.0601

710

500

4800

47.5

2.4

2.5

1.2

5.5

2686

20.6

400

0.047

761

500

5750

51.0

2.6

2.5

1.3

5.5

3421

23.7

34.40

598

401

454

1.2

0.32

0.15

0.12

42.90

672

436

507

1.3

0.35

0.14

0.11

500

71.50

865

507

623

1.6

0.43

0.12

0.11

0.040

0.0366

809

500

7500

54.0

2.7

2.5

1.4

5.5

4335

26.6

630

90.10

966

543

676

1.8

0.48

0.11

0.10

0.039

0.0283

863

400

8450

57.5

2.8

2.5

1.5

5.5

5585

29.8

800

115

1049

596

721

2.0

0.53

0.10

0.10

0.029

0.0221

926

300

10600

62.0

2.9

2.5

1.5

5.5

7346

33.6

143

1132

614

765

2.2

0.58

0.10

0.09

0.0176

992

300

12690

66.5

3

2.5

1.6

5.5

9160

37.6

1000

1.HCC+ ™ Copper Conductor 2.Semiconductive conductor screen 3.DFI™ XLPE Insulation 4.Semiconductive insulation screen 5.Copper tape screen 6. Bedding 7. Aluminium Armour 8. Outer sheath

57.20

764

472

570

1.5

0.39

0.12

0.11

0.098 0.079 0.0630.050

0.0754

657

500

4000

44.0

2.3

2

1.2

5.5

2141

18.4

¢SÓ``````HQhÉ``H

26

BICC ohm/Km ohm/Km µf/Km mA/m

Approximate AC resistance of Conductor at 90˚C

Approximate Reactance at 50 Hertz

Approximate Impedance at 50 Hertz

Approximate Capacitance of Cable

Approx. Charging Current per phase at Uo = 12kV and F = 50Hz

A kA

3. Laid singly in Air, Ambient Temp. 35˚ C

One Second Short Circuit Current Rating of Conductor

50

7.15

207

165

187

0.68

0.18

0.51

0.12

0.493

0.387

757

500

6550

63.5

3

2.5

1.6

5.5

1281

8.4

70

10.10

253

200

227

0.79

0.21

0.36

0.12

0.342

0.268

799

400

7550

67.0

3.1

2.5

1.6

5.5

1845

9.9

95

13.60

304

231

263

0.87

0.23

0.27

0.11

0.247

0.193

848

300

8750

71.0

3.2

2.5

1.7

5.5

2558

11.6

17.20

350

267

298

0.94

0.25

0.22

0.11

0.196

0.153

906

300

10700

75.5

3.4

3.15

1.7

5.5

3219

13

120

FOR ALL CABLES THE MAXIMUM CONDUCTOR OPERATING TEMPERATURE IS 90˚C AND LIMITING CONDUCTOR TEMPERATURE AFTER SHORT CIRCUIT IS 250˚C. LONGER DRUM LENGTHS ARE AVAILABLE TO SPECIFIC CUSTOMER REQUIREMENTS.

A

g =1.2˚C m/W, depth of laying = 0.8m, laid singly

2. Drawn into ducts, Ground Temp. = 30˚C &

depth of laying = 0.8m, laid singly

1. Laid Direct, Ground Temp. 30˚C & g =1.2˚C m/W, A

ohm/Km

Maximum DC resistance of Conductor at 20˚C

Sustained Current Ratings

mm ohm/Km

Minimum Bending Radius of Cable (during installation)

Kg/Km m

Standard Drum Length

Approximate Overall Diameter

Approximate Cable Weight

mm mm

Outersheath Thickness (Nominal)

mm

mm

Insulation Thickness (Nominal)

mm

Kg/Km

Weight of Conductor (Approx)

Armour Wire Diameter (Nominal)

mm

Conductor Diameter (Max)

Separation Sheath Thickness

mm2

Cable Data

Nominal Area of Conductor

Three Core Copper Conductors XLPE Insulated to IEC 60502-2 Steel Wire Armoured

12/20 (24)kV

Table 19

Powerplus

150

21.50

396

298

334

1.0

0.27

0.19

0.10

0.159

0.124

948

300

11900

79.0

3.5

3.15

1.8

5.5

3954

14.5

185

26.50

451

338

374

1.1

0.29

0.16

0.10

0.127

240

34.40

524

383

427

1.2

0.32

0.14

0.10

0.098

0.0754

1061

200

15800

88.5

3.8

3.15

2

5.5

6526

18.4

300

42.90

598

427

472

1.3

0.35

0.12

0.09

0.079

0.0601

1123

200

18300

94.0

3.9

3.15

2.1

5.5

8187

20.6

400

57.20

681

481

525

1.5

0.39

0.11

0.09

0.063

0.047

1213

200

21700

101.5

4.2

3.15

2.2

5.5

10428

23.7

1.HCC+ ™ Copper Conductor 2.Semiconductive conductor screen 3.DFI™ XLPE Insulation 4.Semiconductive insulation screen 5.Copper tape screen 6. Fillers 7. Tape binder 8. Bedding 9. Galvanised steel wire armour 10. Outer sheath

0.0991

995

250

13500

83.0

3.6

3.15

1.9

5.5

4966

16.1

¢SÓ``````HQhÉ``H

BICC

27

mA/m

Approx. Charging Current per phase at Uo = 12kV and F = 50Hz

kA

One Second Short Circuit Current Rating of Conductor

7.15

207

165

187

0.68

0.18

0.51

0.12

0.493

0.387

734

500

5120

61.5

2.9

0.8

1.6

5.5

1281

8.4

50

10.10

253

200

227

0.79

0.21

0.36

0.12

0.342

0.268

778

500

6090

65.0

3

0.8

1.6

5.5

1845

9.9

70

13.60

304

231

263

0.87

0.23

0.27

0.11

0.247

0.193

826

500

7180

69.0

3.1

0.8

1.7

5.5

2558

11.6

95

LIMITING CONDUCTOR TEMPERATURE AFTER SHORT CIRCUIT IS

A

3. Laid singly in Air, Ambient Temp. 35˚ C

FOR ALL CABLES THE MAXIMUM CONDUCTOR OPERATING TEMPERATURE IS 90˚C AND LONGER DRUM LENGTHS ARE AVAILABLE TO SPECIFIC CUSTOMER REQUIREMENTS.

A

g =1.2˚C m/W, depth of laying = 0.8m, laid singly

2. Drawn into Ducts, Ground Temp. = 30˚C &

depth of laying = 0.8m, laid singly

1. Laid Direct, Ground Temp. 30˚C & g =1.2˚C m/W, A

µf/Km

Approximate Capacitance of Cable

Sustained Current Ratings

ohm/Km ohm/Km

ohm/Km

Approximate AC resistance of Conductor at 90˚C

Approximate Impedance at 50 Hertz

ohm/Km

Maximum DC resistance of Conductor at 20˚C

Approximate Reactance at 50 Hertz

m mm

Minimum Bending Radius of Cable (during installation)

Kg/Km

Approximate Cable Weight

Standard Drum Length

mm

Approximate Overall Diameter

mm

Separation Sheath Thickness mm

mm

Insulation Thickness (Nominal)

mm

Kg/Km

Weight of Conductor (Approx)

Outersheath Thickness (Nominal)

mm

Conductor Diameter (Max)

Steel Tape Thickness (Nominal)

mm2

Cable Data

Nominal Area of Conductor

Three Core Copper Conductors XLPE Insulated to IEC 60502-2 Steel Tape Armoured

12/20 (24)kV

Table 20

Powerplus

250˚C.

17.20

350

267

298

0.94

0.25

0.22

0.11

0.196

0.153

866

400

8250

72.5

3.2

0.8

1.7

5.5

3219

13

120

21.50

396

298

334

1.0

0.27

0.19

0.10

0.159

0.124

910

400

9510

78.5

3.4

0.8

1.8

5.5

3954

14.5

150

26.50

451

338

374

1.1

0.29

0.16

0.10

0.127

0.0991

955

300

11020

80.0

3.5

0.8

1.9

5.5

4966

16.1

185

42.90

598

427

472

1.3

0.35

0.12

0.09

0.079

0.0601

1085

200

16590

90.5

3.8

0.8

2.1

5.5

8187

20.6

300

57.20

681

481

525

1.5

0.39

0.11

0.09

0.063

0.047

1174

200

20690

98.0

4

0.8

2.2

5.5

10428

23.7

400

1.HCC+ ™ Copper Conductor 2.Semiconductive conductor screen 3.DFI™ XLPE Insulation 4.Semiconductive insulation screen 5.Copper tape screen 6. Fillers 7. Tape binder 8. Bedding 9. Galvanised steel tape armour 10. Outer sheath

34.40

524

383

427

1.2

0.32

0.14

0.10

0.098

0.0754

1021

250

14150

85.5

3.6

0.8

2

5.5

6526

18.4

240

¢SÓ``````HQhÉ``H

28

BICC ohm/Km ohm/Km µf/Km mA/m

Approximate Reactance at 50 Hertz

Approximate Impedance at 50 Hertz

Approximate Capacitance of Cable

Approx. Charging Current per phase at Uo = 18kV and F = 50Hz

One Second Short Circuit Current Rating of Conductor

Single Core Copper Conductors XLPE Insulated to IEC 60502-2 Unarmoured

18/30 (36)kV

7.15

225

200

196

0.79

0.14

0.51

0.15

0.494

0.387

632

500

1410

32.0

2

8

420

8.4

50

10.10

276

240

240

0.9

0.16

0.37

0.14

0.342

0.268

664

500

1680

33.5

2

8

605

9.9

70

13.60

331

285

285

1.0

0.18

0.28

0.14

0.247

0.193

700

500

2030

35.0

2.1

8

839

11.6

95

250˚C.

17.20

391

320

320

1.1

0.19

0.24

0.13

0.196

0.153

730

500

2310

36.5

2.1

8

1056

13

120

Cable Data

LIMITING CONDUCTOR TEMPERATURE AFTER SHORT CIRCUIT IS

A kA

3. Laid in Air in trefoil touching, Ambient Temp. 35˚ C

FOR ALL CABLES THE MAXIMUM CONDUCTOR OPERATING TEMPERATURE IS 90˚C AND LONGER DRUM LENGTHS ARE AVAILABLE TO SPECIFIC CUSTOMER REQUIREMENTS.

A

g =1.2˚C m/W, depth of laying = 0.8m, laid singly

2. Drawn into Ducts, Ground Temp. 30˚C &

depth of laying = 0.8m, laid in trefoil touching

1. Laid Direct, Ground Temp. 30˚C & g =1.2˚C m/W, A

ohm/Km

Approximate AC resistance of Conductor at 90˚C

Sustained Current Ratings

mm ohm/Km

Maximum DC resistance of Conductor at 20˚C

Standard Drum Length

Minimum Bending Radius of Cable (during installation)

Kg/Km m

Approximate Cable Weight

mm

mm

Insulation Thickness (Nominal)

mm

Kg/Km

Weight of Conductor (Approx)

Approximate Overall Diameter

mm

Conductor Diameter (Max)

Outersheath Thickness (Nominal)

mm2

Nominal Area of Conductor

Table 21

Powerplus

150

21.50

446

360

365

1.1

0.2

0.2

0.13

0.159

0.124

762

500

2690

38.5

2.2

8

1297

14.5

185

26.50

506

396

409

1.2

0.22

0.18

0.12

0.127

0.0991

796

500

3080

40.0

2.2

8

1629

16.1

240

34.40

598

463

472

1.4

0.24

0.15

0.12

0.098

0.0754

846

500

3730

42.5

2.3

8

2141

18.4

300

42.90

681

507

534

1.5

0.26

0.14

0.11

0.079

0.0601

892

500

4460

45.0

2.4

8

2686

20.6

500

71.50

902

623

676

1.8

0.32

0.12

0.10

0.050

0.0366

1020

500

6610

51.0

2.6

8

4335

26.6

630

90.10

1040

694

757

2.0

0.35

0.11

0.10

0.041

0.0283

1088

500

8170

54.5

2.7

8

5585

29.8

800

115

1187

757

828

2.3

0.4

0.10

0.10

0.039

0.0221

1170

400

9570

58.5

2.8

8

7346

33.6

143

1316

819

899

2.5

0.44

0.10

0.09

0.029

0.0176

1254

300

11520

63.0

2.9

8

9160

37.6

1000

1.HCC+ ™ Copper Conductor 2.Semiconductive conductor screen 3.DFI™ XLPE Insulation 4.Semiconductive insulation screen 5.Copper wire screen 6. Tape binder 7. Outer sheath

57.20

782

561

614

1.6

0.29

0.13

0.11

0.063

0.047

958

500

5380

48.0

2.5

8

3421

23.7

400

¢SÓ``````HQhÉ``H

BICC

29

ohm/Km ohm/Km µf/Km mA/m

Approximate Reactance at 50 Hertz

Approximate Impedance at 50 Hertz

Approximate Capacitance of Cable

Approx. Charging Current per phase at Uo = 18kV and F = 50Hz

kA

One Second Short Circuit Current Rating of Conductor

Three Core Copper Conductors XLPE Insulated to IEC 60502-2 Unarmoured

18/30 (36)kV

50

7.15

210

170

198

0.79

0.14

0.51

0.14

0.493

0.387

1320

500

5380

66.0

3.1

8

1281

8.4

70

10.10

258

202

241

0.90

0.16

0.37

0.13

0.342

0.268

1390

500

6410

69.5

3.2

8

1845

9.9

95

13.60

316

241

283

1.0

0.18

0.28

0.12

0.247

0.193

1468

500

7590

73.5

3.3

8

2558

11.6

LIMITING CONDUCTOR TEMPERATURE AFTER SHORT CIRCUIT IS

A

3. Laid singly in Air, Ambient Temp. 35˚ C

FOR ALL CABLES THE MAXIMUM CONDUCTOR OPERATING TEMPERATURE IS 90˚C AND LONGER DRUM LENGTHS ARE AVAILABLE TO SPECIFIC CUSTOMER REQUIREMENTS.

A

g =1.2˚C m/W, depth of laying = 0.8m, laid singly

2. Drawn into Ducts, Ground Temp. 30˚C &

depth of laying = 0.8m, laid singly

1. Laid Direct, Ground Temp. 30˚C & g =1.2˚C m/W, A

ohm/Km

Approximate AC resistance of Conductor at 90˚C

Sustained Current Ratings

mm ohm/Km

Maximum DC resistance of Conductor at 20˚C

Standard Drum Length

Minimum Bending Radius of Cable (during installation)

Kg/Km m

Approximate Cable Weight

mm

mm

Insulation Thickness (Nominal)

mm

Kg/Km

Weight of Conductor (Approx)

Approximate Overall Diameter

mm

Conductor Diameter (Max)

Outersheath Thickness (Nominal)

mm2

Cable Data

Nominal Area of Conductor

Table 22

Powerplus

250˚C.

17.20

359

273

321

1.1

0.19

0.23

0.12

0.196

0.153

1532

500

8650

77.0

3.4

8

3219

13

120

150

21.50

412

312

358

1.1

0.2

0.2

0.11

0.159

0.124

1602

500

9760

80.5

3.5

8

3954

14.5

185

26.50

469

349

406

1.2

0.22

0.17

0.11

0.127

0.0991

1676

500

11210

84.0

3.6

8

4966

16.1

300

42.90

622

443

510

1.5

0.26

0.13

0.10

0.079

0.0601

1882

200

15930

94.5

3.9

8

8187

20.6

400

57.20

708

500

566

1.6

0.29

0.12

0.10

0.063

0.047

2026

200

17370

101.5

4.2

8

10428

23.7

1.HCC+ ™ Copper Conductor 2.Semiconductive conductor screen 3.DFI™ XLPE Insulation 4.Semiconductive insulation screen 5.Copper tape screen 6. Fillers 7. Tape binder 8. Outer sheath

34.40

545

401

462

1.4

0.24

0.14

0.11

0.098

0.0754

1782

250

13530

89.5

3.8

8

6526

18.4

240

¢SÓ``````HQhÉ``H

30

BICC mA/m

Approx. Charging Current per phase at Uo = 18kV and F = 50Hz

kA

One Second Short Circuit Current Rating of Conductor

Single Core Copper Conductors XLPE Insulated to IEC 60502-2 Aluminium Wire Armoured

18/30 (36)kV

7.15

207

187

196

0.79

0.14

0.52

0.16

0.494

0.387

576

500

2030

38.5

2.2

2

1.2

8

420

8.4

50

10.10

254

231

240

0.9

0.16

0.37

0.15

0.342

0.268

599

500

2270

40.0

2.2

2

1.2

8

605

9.9

70

13.60

305

267

285

1.0

0.18

0.28

0.14

0.247

0.193

627

500

2640

42.0

2.3

2

1.2

8

839

11.6

95

250˚C.

17.20

360

303

320

1.1

0.19

0.24

0.14

0.196

0.153

651

500

3000

44.0

2.3

2

1.2

8

1056

13

120

Cable Data

LIMITING CONDUCTOR TEMPERATURE AFTER SHORT CIRCUIT IS

A

3. Laid in Air in trefoil touching, Ambient Temp. 35˚ C

FOR ALL CABLES THE MAXIMUM CONDUCTOR OPERATING TEMPERATURE IS 90˚C AND LONGER DRUM LENGTHS ARE AVAILABLE TO SPECIFIC CUSTOMER REQUIREMENTS.

A

g =1.2˚C m/W, depth of laying = 0.8m, laid singly

2. Drawn into Ducts, Ground Temp. 30˚C &

depth of laying = 0.8m, laid in trefoil touching

1. Laid Direct, Ground Temp. 30˚C & g =1.2˚C m/W, A

µf/Km

Approximate Capacitance of Cable

Sustained Current Ratings

ohm/Km ohm/Km

Approximate Impedance at 50 Hertz

ohm/Km

Approximate AC resistance of Conductor at 90˚C

Approximate Reactance at 50 Hertz

ohm/Km

Maximum DC resistance of Conductor at 20˚C

Kg/Km

Approximate Cable Weight m

mm

Approximate Overall Diameter

mm

mm

Outersheath Thickness (Nominal)

Minimum Bending Radius of Cable (during installation)

mm

Armour Wire Diameter (Nominal)

Standard Drum Length

mm mm

Kg/Km

Weight of Conductor (Approx)

Separation Sheath Thickness

mm

Conductor Diameter (Max)

Insulation Thickness (Nominal)

mm2

Nominal Area of Conductor

Table 23

Powerplus

21.50

411

329

365

1.1

0.2

0.21

0.13

0.159

0.124

692

500

3500

46.5

2.4

2.5

1.3

8

1297

14.5

150

26.50

466

356

401

1.2

0.22

0.18

0.13

0.128

0.0991

719

500

3900

48.0

2.5

2.5

1.3

8

1629

16.1

185

0.0601

792

500

5300

53.0

2.6

2.5

1.4

8

2686

20.6

300

0.047

845

500

6400

56.5

2.7

2.5

1.4

8

3421

23.7

400

34.40

550

401

454

1.4

0.24

0.16

0.12

0.11

57.20

719

472

570

1.6

0.29

0.13

71.50

829

507

623

1.8

0.32

0.12

0.11

0.041

0.0366

893

500

7700

59.5

2.85

2.5

1.5

8

4335

26.6

500

90.10

956

543

676

2.0

0.35

0.11

0.11

0.039

0.0283

945

300

9150

63.0

2.9

2.5

1.6

8

5585

29.8

630

115

1092

596

721

2.3

0.4

0.10

0.09

0.029

0.0221

1008

250

11350

67.5

3.1

2.5

1.6

8

7346

33.6

800

1.HCC+ ™ Copper Conductor 2.Semiconductive conductor screen 3.DFI™ XLPE Insulation 4.Semiconductive insulation screen 5.Copper tape screen 6. Bedding 7. Aluminium Armour 8. Outer sheath

42.90

626

436

507

1.5

0.26

0.14

0.12

0.098 0.079 0.0630.050

0.0754

756

500

4600

50.5

2.6

2.5

1.3

8

2141

18.4

240

¢SÓ``````HQhÉ``H

143

1210

623

765

2.5

0.44

0.09

0.09

0.0176

1076

200

13750

72.0

3.2

2.5

1.7

8

9160

37.6

1000

BICC

31

ohm/Km ohm/Km µf/Km mA/m

Approximate AC resistance of Conductor at 90˚C

Approximate Reactance at 50 Hertz

Approximate Impedance at 50 Hertz

Approximate Capacitance of Cable

Approx. Charging Current per phase at Uo = 18kV and F = 50Hz

kA

One Second Short Circuit Current Rating of Conductor

50

7.15

202

160

187

0.79

0.14

0.51

0.14

0.493

0.387

918

300

9540

76.5

3.4

3.15

1.8

8

1281

8.4

70

10.10

248

191

227

0.90

0.16

0.37

0.13

0.342

0.268

960

300

10300

80.0

3.5

3.15

1.8

8

1845

9.9

95

13.60

304

227

267

1.0

0.18

0.28

0.12

0.247

0.193

1009

300

11700

84.5

3.6

3.15

1.9

8

2558

11.6

LIMITING CONDUCTOR TEMPERATURE AFTER SHORT CIRCUIT IS

A

3. Laid singly in Air, Ambient Temp. 35˚ C

FOR ALL CABLES THE MAXIMUM CONDUCTOR OPERATING TEMPERATURE IS 90˚C AND LONGER DRUM LENGTHS ARE AVAILABLE TO SPECIFIC CUSTOMER REQUIREMENTS.

A

g =1.2˚C m/W, depth of laying = 0.8m, laid singly

2. Drawn into ducts, Ground Temp. = 30˚C &

depth of laying = 0.8m, laid singly

1. Laid Direct, Ground Temp. 30˚C & g =1.2˚C m/W, A

ohm/Km

Maximum DC resistance of Conductor at 20˚C

Sustained Current Ratings

mm ohm/Km

Minimum Bending Radius of Cable (during installation)

Kg/Km m

Standard Drum Length

Approximate Overall Diameter

Approximate Cable Weight

mm mm

Outersheath Thickness (Nominal)

mm

mm

Insulation Thickness (Nominal)

mm

Kg/Km

Weight of Conductor (Approx)

Armour Wire Diameter (Nominal)

mm

Conductor Diameter (Max)

Separation Sheath Thickness

mm2

Cable Data

Nominal Area of Conductor

Three Core Copper Conductors XLPE Insulated to IEC 60502-2 Steel Wire Armoured

18/30 (36)kV

Table 24

Powerplus

250˚C.

17.20

345

258

303

1.1

0.19

0.23

0.12

0.196

0.153

1050

250

12900

87.5

3.7

3.15

2

8

3219

13

120

150

21.50

396

294

338

1.1

0.2

0.2

0.11

0.159

0.124

1093

250

14100

91.5

3.9

3.15

2

8

3954

14.5

240

34.40

524

378

436

1.4

0.24

0.14

0.11

0.098

0.0754

1205

200

18300

100.5

4.1

3.15

2.2

8

6526

18.4

300

42.90

598

418

481

1.5

0.26

0.13

0.10

0.079

0.0601

1267

200

21500

106.0

4.3

3.15

2.3

8

8187

20.6

400

57.20

681

472

534

1.6

0.29

0.12

0.10

0.063

0.047

1357

200

25730

113.5

4.5

3.15

2.4

8

10428

23.7

1.HCC+ ™ Copper Conductor 2.Semiconductive conductor screen 3.DFI™ XLPE Insulation 4.Semiconductive insulation screen 5.Copper tape screen 6. Fillers 7. Tape binder 8. Bedding 9. Galvanised steel wire armour 10. Outer sheath

26.50

451

329

383

1.2

0.22

0.17

0.11

0.127

0.0991

1139

200

16100

95.0

4

3.15

2.1

8

4966

16.1

185

¢SÓ``````HQhÉ``H

32

BICC ohm/Km ohm/Km µf/Km mA/m

Approximate AC resistance of Conductor at 90˚C

Approximate Reactance at 50 Hertz

Approximate Impedance at 50 Hertz

Approximate Capacitance of Cable

Approx. Charging Current per phase at Uo = 18kV and F = 50Hz

kA

One Second Short Circuit Current Rating of Conductor

50

7.15

202

160

187

0.79

0.14

0.51

0.14

0.493

0.387

878

500

6580

73.5

3.3

0.8

1.8

8

1281

8.4

70

10.10

248

191

227

0.90

0.16

0.37

0.13

0.342

0.268

922

400

7670

77.0

3.4

0.8

1.8

8

1845

9.9

95

13.60

304

227

267

1.0

0.18

0.28

0.12

0.247

0.193

971

300

8910

81.0

3.5

0.8

1.9

8

2558

11.6

LIMITING CONDUCTOR TEMPERATURE AFTER SHORT CIRCUIT IS

A

3. Laid singly in Air, Ambient Temp. 35˚ C

FOR ALL CABLES THE MAXIMUM CONDUCTOR OPERATING TEMPERATURE IS 90˚C AND LONGER DRUM LENGTHS ARE AVAILABLE TO SPECIFIC CUSTOMER REQUIREMENTS.

A

g =1.2˚C m/W, depth of laying = 0.8m, laid singly

2. Drawn into Ducts, Ground Temp. = 30˚C &

depth of laying = 0.8m, laid singly

1. Laid Direct, Ground Temp. 30˚C & g =1.2˚C m/W, A

ohm/Km

Maximum DC resistance of Conductor at 20˚C

Sustained Current Ratings

mm ohm/Km

Minimum Bending Radius of Cable (during installation)

Kg/Km m

Standard Drum Length

Approximate Overall Diameter

Approximate Cable Weight

mm mm

Outersheath Thickness (Nominal)

mm

mm

Insulation Thickness (Nominal)

mm

Kg/Km

Weight of Conductor (Approx)

Steel Tape Thickness (Nominal)

mm

Conductor Diameter (Max)

Separation Sheath Thickness

mm2

Cable Data

Nominal Area of Conductor

Three Core Copper Conductors XLPE Insulated to IEC 60502-2 Steel Tape Armoured

18/30 (36)kV

Table 25

Powerplus

250˚C.

17.20

345

258

303

1.1

0.19

0.23

0.12

0.196

0.153

1010

300

10910

84.5

3.6

0.8

2

8

3219

13

120

150

21.50

396

294

338

1.1

0.20

0.20

0.11

0.159

0.124

1054

300

12140

88.0

3.7

0.8

2

8

3954

14.5

185

26.50

451

329

383

1.2

0.22

0.17

0.11

0.127

0.0991

1099

250

13720

92.0

3.8

0.8

2.1

8

4966

16.1

300

42.90

598

416

481

1.5

0.26

0.13

0.10

0.079

0.0601

1226

200

18710

102.5

4.1

0.8

2.3

8

8187

20.6

400

57.20

681

472

534

1.6

0.29

0.12

0.10

0.063

0.047

1313

200

23080

109.5

4.4

0.8

2.4

8

10428

23.7

1.HCC+ ™ Copper Conductor 2.Semiconductive conductor screen 3.DFI™ XLPE Insulation 4.Semiconductive insulation screen 5.Copper tape screen 6. Fillers 7. Tape binder 8. Bedding 9. Galvanised steel tape armour 10. Outer sheath

34.40

524

378

436

1.4

0.24

0.14

0.11

0.098

0.0754

1166

200

16170

97.5

4

0.8

2.2

8

6526

18.4

240

¢SÓ``````HQhÉ``H

BICC

33

ohm/Km ohm/Km µf/Km mA/m

Approximate Reactance at 50 Hertz

Approximate Impedance at 50 Hertz

Approximate Capacitance of Cable

Approx. Charging Current per phase at Uo = 3.6kV and F = 50Hz

One Second Short Circuit Current Rating of Conductor

Single Core Aluminium Conductors XLPE Insulated to IEC 60502-2 Unarmoured

3.6/6 (7.2)kV

4.70

166

156

151

0.38

0.34

0.83

0.12

0.822

0.641

396

500

510

20.0

1.6

2.5

125

8.4

50

6.58

207

191

187

0.43

0.38

0.58

0.12

0.568

0.443

428

500

630

21.5

1.6

2.5

180

9.9

70

8.93

258

227

223

0.49

0.43

0.43

0.11

0.411

0.32

464

500

790

23.5

1.7

2.5

250

11.6

95

250˚C.

11.30

294

254

249

0.53

0.47

0.34

0.11

0.325

0.253

494

500

860

25.0

1.7

2.5

313

13

120

Cable Data

LIMITING CONDUCTOR TEMPERATURE AFTER SHORT CIRCUIT IS

A kA

3. Laid in Air in trefoil touching, Ambient Temp. 35˚ C

FOR ALL CABLES THE MAXIMUM CONDUCTOR OPERATING TEMPERATURE IS 90˚C AND LONGER DRUM LENGTHS ARE AVAILABLE TO SPECIFIC CUSTOMER REQUIREMENTS.

A

g =1.2˚C m/W, depth of laying = 0.8m, laid singly

2. Drawn into Ducts, Ground Temperature = 30˚C &

depth of laying = 0.8m, laid in trefoil touching

1. Laid Direct, Ground Temp. 30˚C & g =1.2˚C m/W, A

ohm/Km

Approximate AC resistance of Conductor at 90˚C

Sustained Current Ratings

mm ohm/Km

Maximum DC resistance of Conductor at 20˚C

Standard Drum Length

Minimum Bending Radius of Cable (during installation)

Kg/Km m

Approximate Cable Weight

mm

mm

Insulation Thickness (Nominal)

mm

Kg/Km

Weight of Conductor (Approx)

Approximate Overall Diameter

mm

Conductor Diameter (Max)

Outersheath Thickness (Nominal)

mm2

Nominal Area of Conductor

Table 26

Powerplus

150

14.10

336

280

285

0.58

0.51

0.29

0.10

0.265

0.206

526

500

1000

26.5

1.8

2.5

386

14.5

185

17.40

391

312

320

0.63

0.56

0.24

0.10

0.211

0.164

560

500

1140

28.0

1.8

2.5

486

16.1

240

22.60

460

360

369

0.69

0.61

0.19

0.10

0.162

0.125

614

500

1430

31.0

1.9

2.6

637

18.4

300

28.20

534

405

423

0.71

0.63

0.16

0.09

0.13

0.1

668

500

1720

33.5

2

2.8

800

20.6

500

47.00

727

507

543

0.78

0.69

0.13

0.09

0.080

0.0605

814

500

2550

41.0

2.2

3.2

1318

26.6

630

59.20

837

570

605

0.83

0.73

0.11

0.09

0.064

0.0469

882

500

3110

44.5

2.3

3.2

1672

29.8

800

75.20

975

632

685

0.89

0.79

0.1

0.08

0.051

0.0367

964

400

3690

48.5

2.5

3.2

2231

33.6

94.00

1095

703

757

0.96

0.85

0.091

0.08

0.043

0.0291

1042

300

4090

52.5

2.6

3.2

2745

37.6

1000

1.HCC+ ™ Aluminium Conductor 2.Semiconductive conductor screen 3.DFI™ XLPE Insulation 4.Semiconductive insulation screen 5.Copper wire screen 6. Tape binder 7. Outer sheath

37.60

616

454

481

0.74

0.65

0.14

0.09

0.102

0.0778

744

500

2140

37.5

2.1

3

1024

23.7

400

¢SÓ``````HQhÉ``H

34

BICC mm Kg/Km

Approximate Overall Diameter

Approximate Cable Weight

mA/m

Approx. Charging Current per phase at Uo = 3.6kV and F = 50Hz

kA

One Second Short Circuit Current Rating of Conductor

4.70

163

127

151

0.38

0.34

0.83

0.10

0.822

0.641

605

500

1720

40.5

2.2

2.5

381

8.4

50

6.58

201

156

184

0.43

0.38

0.58

0.10

0.568

0.443

656

500

2060

44.0

2.3

2.5

549

9.9

70

8.93

239

189

217

0.49

0.43

0.42

0.09

0.411

0.32

716

500

2460

48.0

2.5

2.5

762

11.6

95

LIMITING CONDUCTOR TEMPERATURE AFTER SHORT CIRCUIT IS

A

3. Laid singly in Air, Ambient Temp. 35˚ C

FOR ALL CABLES THE MAXIMUM CONDUCTOR OPERATING TEMPERATURE IS 90˚C AND LONGER DRUM LENGTHS ARE AVAILABLE TO SPECIFIC CUSTOMER REQUIREMENTS.

A

g =1.2˚C m/W, depth of laying = 0.8m, laid singly

2. Drawn into Ducts, Ground Temp. 30˚C &

depth of laying = 0.8m, laid singly

1. Laid Direct, Ground Temp. 30˚C & g =1.2˚C m/W, A

µf/Km

Approximate Capacitance of Cable

Sustained Current Ratings

ohm/Km ohm/Km

Approximate Impedance at 50 Hertz

Approximate AC resistance of Conductor at 90˚C

Approximate Reactance at 50 Hertz

ohm/Km ohm/Km

Maximum DC resistance of Conductor at 20˚C

Three Core Aluminium Conductors XLPE Insulated to IEC 60502-2 Unarmoured

3.6/6 (7.2)kV

mm

Outersheath Thickness (Nominal)

m

mm

Insulation Thickness (Nominal)

mm

Kg/Km

Weight of Conductor (Approx)

Minimum Bending Radius of Cable (during installation)

mm

Conductor Diameter (Max)

Standard Drum Length

mm2

Cable Data

Nominal Area of Conductor

Table 27

Powerplus

250˚C.

11.30

282

212

250

0.53

0.47

0.34

0.09

0.325

0.253

764

500

2830

51.0

2.6

2.5

955

13

120

14.10

316

241

283

0.58

0.51

0.28

0.09

0.265

0.206

815

500

3270

54.5

2.7

2.5

1177

14.5

150

17.40

368

274

316

0.63

0.56

0.23

0.09

0.211

0.164

870

500

3740

58.0

2.8

2.5

1482

16.1

185

28.20

488

354

410

0.71

0.63

0.15

0.08

0.130

0.100

1047

300

5620

70.0

3.1

2.8

2439

20.6

300

37.60

565

406

462

0.74

0.65

0.13

0.08

0.102

0.0778

1169

250

6860

78.0

3.4

3

3122

23.7

400

1.HCC+ ™ Aluminium Conductor 2.Semiconductive conductor screen 3.DFI™ XLPE Insulation 4.Semiconductive insulation screen 5.Copper tape screen 6. Fillers 7. Tape binder 8. Outer sheath

22.60

431

316

358

0.69

0.61

0.18

0.08

0.162

0.125

957

400

4550

64.0

3

2.6

1942

18.4

240

¢SÓ``````HQhÉ``H

BICC

35

mA/m

Approx. Charging Current per phase at Uo = 3.6kV and F = 50Hz

kA

One Second Short Circuit Current Rating of Conductor

Single Core Aluminium Conductors XLPE Insulated to IEC 60502-2 Aluminium Wire Armoured

3.6/6 (7.2)kV

4.70

179

151

151

0.38

0.34

0.83

0.13

0.822

0.641

387

500

810

26.0

1.8

1.6

1.2

2.5

125

8.4

50

6.58

221

187

187

0.43

0.38

0.58

0.12

0.568

0.443

417

500

980

28.0

1.8

1.6

1.2

2.5

180

9.9

70

8.93

271

218

223

0.49

0.43

0.43

0.12

0.411

0.32

438

500

1170

29.5

1.9

1.6

1.2

2.5

250

11.6

95

250˚C.

11.28

327

245

249

0.53

0.47

0.29

0.11

0.325

0.253

461

500

1260

31.0

1.9

1.6

1.2

2.5

313

13

120

Cable Data

LIMITING CONDUCTOR TEMPERATURE AFTER SHORT CIRCUIT IS

A

3. Laid in Air in trefoil touching, Ambient Temp. 35˚ C

FOR ALL CABLES THE MAXIMUM CONDUCTOR OPERATING TEMPERATURE IS 90˚C AND LONGER DRUM LENGTHS ARE AVAILABLE TO SPECIFIC CUSTOMER REQUIREMENTS.

A

g =1.2˚C m/W, depth of laying = 0.8m, laid singly

2. Drawn into Ducts, Ground Temp. 30˚C &

depth of laying = 0.8m, laid in trefoil touching

1. Laid Direct, Ground Temp. 30˚C & g =1.2˚C m/W, A

µf/Km

Approximate Capacitance of Cable

Sustained Current Ratings

ohm/Km ohm/Km

ohm/Km

Approximate AC resistance of Conductor at 90˚C

Approximate Impedance at 50 Hertz

ohm/Km

Maximum DC resistance of Conductor at 20˚C

Approximate Reactance at 50 Hertz

m

Approximate Cable Weight

mm

Kg/Km

Approximate Overall Diameter

Minimum Bending Radius of Cable (during installation)

mm

Outersheath Thickness (Nominal)

Standard Drum Length

mm mm

Armour Wire Diameter (Nominal)

mm mm

Kg/Km

Weight of Conductor (Approx)

Separation Sheath Thickness

mm

Conductor Diameter (Max)

Insulation Thickness (Nominal)

mm2

Nominal Area of Conductor

Table 28

Powerplus

14.10

350

267

280

0.58

0.51

0.24

0.11

0.265

0.206

485

500

1390

32.5

2

1.6

1.2

2.5

386

14.5

150

17.39

400

298

316

0.63

0.56

0.19

0.11

0.211

0.164

522

500

1660

35.0

2

2

1.2

2.5

486

16.1

185

22.56

469

338

360

0.69

0.61

0.16

0.10

0.162

0.125

563

500

1950

37.5

2.1

2

1.2

2.6

637

18.4

240

28.20

534

374

405

0.71

0.63

0.14

0.10

0.13

0.1

605

500

2320

40.5

2.2

2

1.2

2.8

800

20.6

300

47.00

708

445

507

0.78

0.69

0.13

0.10

0.080

0.0605

732

500

3440

49.0

2.5

2.5

1.3

3.2

1318

26.6

500

59.22

810

490

570

0.83

0.73

0.11

0.10

0.064

0.0469

786

400

4090

52.5

2.6

2.5

1.4

3.2

1672

29.8

630

75.20

902

525

623

0.89

0.79

0.10

0.09

0.051

0.0367

849

300

4890

57.0

2.7

2.5

1.4

3.2

2231

33.6

800

94.00

994

570

676

0.96

0.85

0.09

0.09

0.043

0.0291

915

250

5680

61.0

2.9

2.5

1.5

3.2

2745

37.6

1000

1.HCC+ ™ Aluminium Conductor 2.Semiconductive conductor screen 3.DFI™ XLPE Insulation 4.Semiconductive insulation screen 5.Copper tape screen 6. Bedding 7. Aluminium armour 8. Outer sheath

37.60

616

405

454

0.74

0.65

0.13

0.10

0.102

0.0778

660

500

2710

44.0

2.3

2

1.2

3

1024

23.7

400

¢SÓ``````HQhÉ``H

36

BICC ohm/Km ohm/Km µf/Km mA/m

Approximate AC resistance of Conductor at 90˚C

Approximate Reactance at 50 Hertz

Approximate Impedance at 50 Hertz

Approximate Capacitance of Cable

Approx. Charging Current per phase at Uo = 3.6kV and F = 50Hz

kA

One Second Short Circuit Current Rating of Conductor

50

4.70

156

120

142

0.38

0.34

0.83

0.10

0.822

0.641

583

500

3800

49.0

2.5

2.5

1.3

2.5

381

8.4

70

6.58

193

147

174

0.43

0.38

0.58

0.10

0.568

0.443

626

500

4310

52.5

2.6

2.5

1.4

2.5

549

9.9

95

8.93

230

178

205

0.49

0.43

0.42

0.10

0.411

0.32

676

500

4910

56.5

2.7

2.5

1.4

2.5

762

11.6

LIMITING CONDUCTOR TEMPERATURE AFTER SHORT CIRCUIT IS

A

3. Laid Singly in Air, Ambient Temp. 35˚ C

FOR ALL CABLES THE MAXIMUM CONDUCTOR OPERATING TEMPERATURE IS 90˚C AND LONGER DRUM LENGTHS ARE AVAILABLE TO SPECIFIC CUSTOMER REQUIREMENTS.

A

g =1.2˚C m/W, depth of laying = 0.8m, laid singly

2. Drawn into ducts, Ground Temp. = 30˚C &

depth of laying = 0.8m, laid singly

1. Laid Direct, Ground Temp. 30˚C & g =1.2˚C m/W, A

ohm/Km

Maximum DC resistance of Conductor at 20˚C

Sustained Current Ratings

mm ohm/Km

Minimum Bending Radius of Cable (during installation)

Kg/Km m

Standard Drum Length

Approximate Overall Diameter

Approximate Cable Weight

mm mm

Outersheath Thickness (Nominal)

mm

mm

Insulation Thickness (Nominal)

mm

Kg/Km

Weight of Conductor (Approx)

Armour Wire Diameter (Nominal)

mm

Conductor Diameter (Max)

Separation Sheath Thickness

mm2

Cable Data

Nominal Area of Conductor

Three Core Aluminium Conductors XLPE Insulated to IEC 60502-2 Steel Wire Armoured

3.6/6 (7.2)kV

Table 29

Powerplus

250˚C.

11.28

271

200

236

0.53

0.47

0.34

0.10

0.325

0.253

715

400

5440

60.0

2.8

2.5

1.5

2.5

955

13

120

150

14.10

304

227

267

0.58

0.51

0.28

0.09

0.265

0.206

758

400

6030

63.5

2.9

2.5

1.6

2.5

1177

14.5

185

17.39

354

258

298

0.63

0.56

0.23

0.09

0.211

0.164

804

300

6920

67.5

3.1

2.5

1.6

2.5

1482

16.1

300

28.20

469

334

387

0.71

0.63

0.15

0.08

0.130

0.100

967

250

10360

81.0

3.5

3.15

1.8

2.8

2439

20.6

400

37.60

543

383

436

0.74

0.65

0.13

0.08

0.102

0.0778

1068

250

12000

89.0

3.8

3.15

2

3

3122

23.7

1.HCC+ ™ Aluminium Conductor 2.Semiconductive conductor screen 3.DFI™ XLPE Insulation 4.Semiconductive insulation screen 5.Copper tape screen 6. Fillers 7. Tape binder 8. Bedding 9. Galvanised steel wire armour 10. Outer sheath

22.56

414

298

338

0.69

0.61

0.18

0.08

0.162

0.125

876

250

8920

73.5

3.3

2.5

1.7

2.6

1942

18.4

240

¢SÓ``````HQhÉ``H

BICC

37

mm mm

Separation Sheath Thickness

Steel Tape Thickness (Nominal)

ohm/Km ohm/Km µf/Km mA/m

Approximate Reactance at 50 Hertz

Approximate Impedance at 50 Hertz

Approximate Capacitance of Cable

Approx. Charging Current per phase at Uo = 3.6kV and F = 50Hz

kA

One Second Short Circuit Current Rating of Conductor

Three Core Aluminium Conductors XLPE Insulated to IEC 60502-2 Steel Tape Armoured

50

4.70

156

120

142

0.38

0.34

0.83

0.10

0.822

0.641

560

500

2750

47.0

2.4

0.8

1.3

2.5

381

8.4

70

6.58

193

147

174

0.43

0.38

0.58

0.10

0.568

0.443

604

500

3210

50.5

2.5

0.8

1.4

2.5

549

9.9

95

8.93

230

178

205

0.49

0.43

0.42

0.09

0.411

0.32

652

500

3800

54.5

2.7

0.8

1.4

2.5

762

11.6

LIMITING CONDUCTOR TEMPERATURE AFTER SHORT CIRCUIT IS

A

3. Laid singly in Air, Ambient Temp. 35˚ C

FOR ALL CABLES THE MAXIMUM CONDUCTOR OPERATING TEMPERATURE IS 90˚C AND LONGER DRUM LENGTHS ARE AVAILABLE TO SPECIFIC CUSTOMER REQUIREMENTS.

A

g =1.2˚C m/W, depth of laying = 0.8m, laid singly

2. Drawn into Ducts, Ground Temp. = 30˚C &

depth of laying = 0.8m, laid singly

1. Laid Direct, Ground Temp. 30˚C & g =1.2˚C m/W, A

ohm/Km

Approximate AC resistance of Conductor at 90˚C

Sustained Current Ratings

mm ohm/Km

Maximum DC resistance of Conductor at 20˚C

Standard Drum Length

Minimum Bending Radius of Cable (during installation)

Kg/Km m

Approximate Cable Weight

mm

mm

Insulation Thickness (Nominal)

mm

Kg/Km

Weight of Conductor (Approx)

Approximate Overall Diameter

mm

Conductor Diameter (Max)

Outersheath Thickness (Nominal)

mm2

Cable Data

Nominal Area of Conductor

3.6/6 (7.2)kV

Table 30

Powerplus

250˚C.

11.28

271

200

236

0.53

0.47

0.34

0.09

0.325

0.253

692

400

4250

58.0

2.8

0.8

1.5

2.5

955

13

120

150

14.10

304

227

267

0.58

0.51

0.28

0.09

0.265

0.206

736

400

4920

61.5

2.9

0.8

1.6

2.5

1177

14.5

185

17.39

354

258

298

0.63

0.56

0.23

0.09

0.211

0.164

781

300

5520

65.5

3

0.8

1.6

2.5

1482

16.1

300

28.20

469

334

387

0.71

0.63

0.15

0.08

0.130

0.100

928

250

8270

77.5

3.4

0.8

1.8

2.8

2439

20.6

400

37.60

543

383

436

0.74

0.65

0.13

0.08

0.102

0.0778

1028

250

11030

86.0

3.7

0.8

2

3

3122

23.7

1.HCC+ ™ Aluminium Conductor 2.Semiconductive conductor screen 3.DFI™ XLPE Insulation 4.Semiconductive insulation screen 5.Copper tape screen 6. Fillers 7. Tape binder 8. Bedding 9. Galvanised steel tape armour 10. Outer sheath

22.56

414

298

338

0.69

0.61

0.18

0.08

0.162

0.125

853

250

6630

71.5

3.2

0.8

1.7

2.6

1942

18.4

240

¢SÓ``````HQhÉ``H

38

BICC ohm/Km ohm/Km µf/Km mA/m

Approximate AC resistance of Conductor at 90˚C

Approximate Reactance at 50 Hertz

Approximate Impedance at 50 Hertz

Approximate Capacitance of Cable

Approx. Charging Current per phase at Uo = 6kV and f = 50Hz

One Second Short Circuit Current Rating of Conductor

Single Core Aluminium Conductors XLPE Insulated to IEC 60502-2 Unarmoured

6/10 (12)kV

4.70

166

156

151

0.47

0.25

0.83

0.13

0.822

0.641

434

500

610

22.0

1.6

3.4

125

8.4

50

6.58

207

191

187

0.55

0.29

0.58

0.12

0.568

0.443

466

500

730

23.5

1.7

3.4

180

9.9

70

8.93

258

227

223

0.66

0.35

0.43

0.11

0.411

0.32

502

500

890

25.5

1.7

3.4

250

11.6

95

250˚C.

11.28

294

254

249

0.72

0.38

0.34

0.11

0.325

0.253

532

500

990

27.0

1.8

3.4

313

13

120

Cable Data

LIMITING CONDUCTOR TEMPERATURE AFTER SHORT CIRCUIT IS

A kA

3. Laid in Air in trefoil touching, Ambient Temp. 35˚ C

FOR ALL CABLES THE MAXIMUM CONDUCTOR OPERATING TEMPERATURE IS 90˚C AND LONGER DRUM LENGTHS ARE AVAILABLE TO SPECIFIC CUSTOMER REQUIREMENTS.

A

g =1.2˚C m/W, depth of laying = 0.8m, laid singly

2. Drawn into Ducts, Ground Temp. = 30˚C &

depth of laying = 0.8m, laid in trefoil touching

1. Laid Direct, Ground Temp. 30˚C & g =1.2˚C m/W, A

ohm/Km

Maximum DC resistance of Conductor at 20˚C

Sustained Current Ratings

mm ohm/Km

Minimum Bending Radius of Cable (during installation)

Kg/Km m

Standard Drum Length

Approximate Overall Diameter

Approximate Cable Weight

mm mm

Outersheath Thickness (Nominal)

Kg/Km mm

Insulation Thickness (Nominal)

mm

Conductor Diameter (Max)

Weight of Conductor (Approx)

mm2

Nominal Area of Conductor

Table 31

Powerplus

150

14.10

336

280

285

0.77

0.41

0.29

0.11

0.265

0.206

564

500

1130

28.5

1.8

3.4

386

14.5

185

17.39

391

312

320

0.89

0.47

0.23

0.10

0.211

0.164

598

500

1320

30.0

1.9

3.4

486

16.1

240

22.56

460

360

369

0.96

0.51

0.19

0.10

0.162

0.125

648

500

1570

32.5

2

3.4

637

18.4

300

28.20

534

405

423

1.0

0.54

0.16

0.10

0.13

0.1

694

500

1830

35.0

2

3.4

800

20.6

500

47.00

727

507

543

1.2

0.66

0.12

0.09

0.080

0.0605

822

500

2720

41.5

2.2

3.4

1318

26.6

630

59.22

837

570

605

1.4

0.74

0.11

0.09

0.064

0.0469

890

500

3360

44.5

2.3

3.4

1672

29.8

800

75.20

975

632

685

1.5

0.78

0.10

0.08

0.051

0.0367

972

400

3540

49.0

2.5

3.4

2231

33.6

94.00

1095

703

757

1.5

0.80

0.09

0.08

0.043

0.0291

1056

300

4120

53.0

2.6

3.4

2745

37.6

1000

1.HCC+ ™ Aluminium Conductor 2.Semiconductive conductor screen 3.DFI™ XLPE Insulation 4.Semiconductive insulation screen 5.Copper wire screen 6. Tape binder 7. Outer sheath

37.60

616

454

481

1.1

0.58

0.14

0.09

0.102

0.0778

760

500

2210

38.0

2.1

3.4

1024

23.7

400

¢SÓ``````HQhÉ``H

BICC

39

ohm/Km ohm/Km µf/Km mA/m

Approximate Reactance at 50 Hertz

Approximate Impedance at 50 Hertz

Approximate Capacitance of Cable

Approx. Charging Current per phase at Uo = 6kV and f = 50Hz

kA

One Second Short Circuit Current Rating of Conductor

4.70

163

127

151

0.47

0.11

0.822

0.641

6.58

201

156

184

0.55

0.29

0.58

0.11

0.568

0.443

723

500

2780

48.5

2.5

3.4

549

9.9

70

8.93

239

189

217

0.66

0.35

0.43

0.10

0.41

0.32

782

500

3300

52.5

2.6

3.4

762

11.6

95

LIMITING CONDUCTOR TEMPERATURE AFTER SHORT CIRCUIT IS

A

3. Laid singly in Air, Ambient Temp. 35˚ C

FOR ALL CABLES THE MAXIMUM CONDUCTOR OPERATING TEMPERATURE IS 90˚C AND LONGER DRUM LENGTHS ARE AVAILABLE TO SPECIFIC CUSTOMER REQUIREMENTS.

A

g =1.2˚C m/W, depth of laying = 0.8m, laid singly

2. Drawn into Ducts, Ground Temp. 30˚C &

depth of laying = 0.8m, laid singly

1. Laid Direct, Ground Temp. 30˚C & g =1.2˚C m/W, A

0.25

ohm/Km

Approximate AC resistance of Conductor at 90˚C

Sustained Current Ratings

0.83

ohm/Km

Maximum DC resistance of Conductor at 20˚C

500 671

m

Three Core Aluminium Conductors XLPE Insulated to IEC 60502-2 Unarmoured

6/10 (12)kV

45.0 2330

mm

Kg/Km

Approximate Cable Weight

Minimum Bending Radius of Cable (during installation)

mm

Approximate Overall Diameter

2.4

3.4

381

8.4

50

Standard Drum Length

mm mm

Kg/Km

Weight of Conductor (Approx)

Outersheath Thickness (Nominal)

mm

Conductor Diameter (Max)

Insulation Thickness (Nominal)

mm2

Cable Data

Nominal Area of Conductor

Table 32

Powerplus

250˚C.

11.30

282

212

250

0.72

0.38

0.34

0.10

0.325

0.253

831

500

3820

55.5

2.7

3.4

955

13

120

14.10

316

241

283

0.77

0.41

0.29

0.09

0.265

0.206

882

500

4300

59.0

2.8

3.4

1177

14.5

150

17.40

368

274

316

0.89

0.47

0.23

0.09

0.211

0.164

938

500

4920

62.5

2.9

3.4

1482

16.1

185

28.20

488

354

410

1.0

0.54

0.16

0.09

0.130

0.100

1094

300

7050

73.0

3.2

3.4

2439

20.6

300

37.60

565

406

462

1.1

0.58

0.14

0.08

0.102

0.0778

1202

250

6990

80.5

3.5

3.4

3122

23.7

400

1.HCC+ ™ Aluminium Conductor 2.Semiconductive conductor screen 3.DFI™ XLPE Insulation 4.Semiconductive insulation screen 5.Copper tape screen 6. Fillers 7. Tape binder 8. Outer sheath

22.60

431

316

358

0.96

0.51

0.19

0.09

0.161

0.125

1017

400

5990

68.0

3.1

3.4

1942

18.4

240

¢SÓ``````HQhÉ``H

40

BICC ohm/Km ohm/Km µf/Km mA/m

Approximate AC resistance of Conductor at 90˚C

Approximate Reactance at 50 Hertz

Approximate Impedance at 50 Hertz

Approximate Capacitance of Cable

Approx. Charging Current per phase at Uo = 6kV and f = 50Hz

One Second Short Circuit Current Rating of Conductor

Single Core Aluminium Conductors XLPE Insulated to IEC 60502-2 Aluminium Wire Armoured

6/10 (12)kV

4.70

179

151

151

0.47

0.25

0.83

0.14

0.822

0.641

416

500

910

28.0

1.8

1.6

1.2

3.4

125

8.4

50

6.58

221

187

187

0.55

0.29

0.58

0.13

0.568

0.443

440

500

1180

29.5

1.9

1.6

1.2

3.4

180

9.9

70

8.93

271

218

223

0.66

0.35

0.43

0.12

0.411

0.32

467

500

1370

31.5

1.9

1.6

1.2

3.4

250

11.6

95

250˚C.

11.28

327

245

249

0.72

0.38

0.34

0.12

0.325

0.253

489

500

1530

33.0

2

1.6

1.2

3.4

313

13

120

Cable Data

LIMITING CONDUCTOR TEMPERATURE AFTER SHORT CIRCUIT IS

A kA

3. Laid in Air in trefoil touching, Ambient Temp. 35˚ C

FOR ALL CABLES THE MAXIMUM CONDUCTOR OPERATING TEMPERATURE IS 90˚C AND LONGER DRUM LENGTHS ARE AVAILABLE TO SPECIFIC CUSTOMER REQUIREMENTS.

A

g =1.2˚C m/W, depth of laying = 0.8m, laid singly

2. Drawn into Ducts, Ground Temp. 30˚C &

depth of laying = 0.8m, laid in trefoil touching

1. Laid Direct, Ground Temp. 30˚C & g =1.2˚C m/W, A

ohm/Km

Maximum DC resistance of Conductor at 20˚C

Sustained Current Ratings

mm ohm/Km

Minimum Bending Radius of Cable (during installation)

Kg/Km m

Standard Drum Length

Approximate Overall Diameter

Approximate Cable Weight

mm mm

Outersheath Thickness (Nominal)

mm

mm

Insulation Thickness (Nominal)

mm

Kg/Km

Weight of Conductor (Approx)

Armour Wire Diameter (Nominal)

mm

Conductor Diameter (Max)

Separation Sheath Thickness

mm2

Nominal Area of Conductor

Table 33

Powerplus

150

14.10

350

267

280

0.77

0.41

0.29

0.12

0.265

0.206

527

500

1780

35.5

2.1

2

1.2

3.4

386

14.5

185

17.39

400

298

316

0.89

0.47

0.23

0.11

0.211

0.164

552

500

1960

37.0

2.1

2

1.2

3.4

486

16.1

240

22.56

469

338

360

0.96

0.51

0.19

0.11

0.162

0.125

588

500

2300

39.5

2.2

2

1.2

3.4

637

18.4

300

28.20

534

374

405

1.0

0.54

0.16

0.10

0.13

0.100

623

500

2620

41.5

2.3

2

1.2

3.4

800

20.6

500

47.00

708

445

507

1.2

0.66

0.12

0.10

0.080

0.0605

738

500

3900

49.5

2.5

2.5

1.3

3.4

1318

26.6

630

59.22

810

490

570

1.4

0.74

0.11

0.10

0.064

0.0469

792

400

4650

53.0

2.6

2.5

1.4

3.4

1672

29.8

800

75.20

902

525

623

1.5

0.78

0.10

0.09

0.051

0.0367

855

300

4960

57.5

2.7

2.5

1.4

3.4

2231

33.6

94.00

994

570

676

1.5

0.80

0.10

0.09

0.043

0.0291

921

300

5710

61.5

2.9

2.5

1.5

3.4

2745

37.6

1000

1.HCC+ ™ Aluminium Conductor 2.Semiconductive conductor screen 3.DFI™ XLPE Insulation 4.Semiconductive insulation screen 5.Copper tape screen 6. Bedding 7. Aluminium armour 8. Outer sheath

37.60

616

405

454

1.1

0.58

0.14

0.10

0.102

0.0778

692

500

3260

46.5

2.4

2.5

1.3

3.4

1024

23.7

400

¢SÓ``````HQhÉ``H

BICC

41

mm mm

Separation Sheath Thickness

Armour Wire Diameter (Nominal)

ohm/Km ohm/Km µf/Km mA/m

Approximate Reactance at 50 Hertz

Approximate Impedance at 50 Hertz

Approximate Capacitance of Cable

Approx. Charging Current per phase at Uo = 6kV and f = 50Hz

A kA

3. Laid singly in Air, Ambient Temp. 35˚ C

One Second Short Circuit Current Rating of Conductor

50

4.70

156

120

142

0.47

0.25

0.83

0.11

0.822

0.641

636

500

4350

53.0

2.6

2.5

1.4

3.4

381

8.4

70

6.58

193

147

174

0.55

0.29

0.58

0.11

0.568

0.443

678

500

4960

56.5

2.7

2.5

1.4

3.4

549

9.9

95

8.93

230

178

205

0.66

0.35

0.43

0.10

0.411

0.32

727

500

5360

61.0

2.9

2.5

1.5

3.4

762

11.6

11.28

271

200

236

0.72

0.38

0.34

0.10

0.325

0.253

768

400

6240

64.0

3

2.5

1.6

3.4

955

13

120

FOR ALL CABLES THE MAXIMUM CONDUCTOR OPERATING TEMPERATURE IS 90˚C AND LIMITING CONDUCTOR TEMPERATURE AFTER SHORT CIRCUIT IS 250˚C. LONGER DRUM LENGTHS ARE AVAILABLE TO SPECIFIC CUSTOMER REQUIREMENTS.

A

g =1.2˚C m/W, depth of laying = 0.8m, laid singly

2. Drawn into ducts, Ground Temp. = 30˚C &

depth of laying = 0.8m, laid singly

1. Laid Direct, Ground Temp. 30˚C & g =1.2˚C m/W, A

ohm/Km

Approximate AC resistance of Conductor at 90˚C

Sustained Current Ratings

mm ohm/Km

Maximum DC resistance of Conductor at 20˚C

Standard Drum Length

Minimum Bending Radius of Cable (during installation)

Kg/Km m

Approximate Cable Weight

mm

mm

Insulation Thickness (Nominal)

mm

Kg/Km

Weight of Conductor (Approx)

Approximate Overall Diameter

mm

Conductor Diameter (Max)

Outersheath Thickness (Nominal)

mm2

Cable Data

Nominal Area of Conductor

Three Core Aluminium Conductors XLPE Insulated to IEC 60502-2 Steel Wire Armoured

6/10 (12)kV

Table 34

Powerplus

150

14.10

304

227

267

0.77

0.41

0.29

0.09

0.265

0.206

810

300

6780

67.5

3.1

2.5

1.6

3.4

1177

14.5

185

17.39

354

258

298

0.89

0.47

0.23

0.09

0.211

0.164

857

300

7520

71.5

3.2

2.5

1.7

3.4

1482

16.1

300

28.20

469

334

387

1.0

0.54

0.16

0.09

0.130

0.100

1002

200

10860

83.5

3.6

3.15

1.9

3.4

2439

20.6

400

37.60

543

383

436

1.1

0.58

0.14

0.08

0.102

0.0778

1092

200

12450

91.0

3.8

3.15

2

3.4

3122

23.7

1.HCC+ ™ Aluminium Conductor 2.Semiconductive conductor screen 3.DFI™ XLPE Insulation 4.Semiconductive insulation screen 5.Copper tape screen 6. Fillers 7. Tape binder 8. Bedding 9. Galvanised steel wire armour 10. Outer sheath

22.56

414

298

338

0.96

0.51

0.19

0.09

0.162

0.125

940

250

9670

78.5

3.4

3.15

1.8

3.4

1942

18.4

240

¢SÓ``````HQhÉ``H

42

BICC mm mm

Separation Sheath Thickness

Steel Tape Thickness (Nominal)

ohm/Km ohm/Km µf/Km mA/m

Approximate Reactance at 50 Hertz

Approximate Impedance at 50 Hertz

Approximate Capacitance of Cable

Approx. Charging Current per phase at Uo = 6kV and f = 50Hz

kA

One Second Short Circuit Current Rating of Conductor

50

4.70

156

120

142

0.47

0.25

0.83

0.11

0.822

0.641

612

500

3150

51.0

2.6

0.8

1.4

3.4

381

8.4

70

6.58

193

147

174

0.55

0.29

0.58

0.11

0.568

0.443

655

500

3620

55.0

2.7

0.8

1.4

3.4

549

9.9

95

8.93

230

178

205

0.66

0.35

0.43

0.10

0.411

0.32

704

500

4220

59.0

2.8

0.8

1.5

3.4

762

11.6

LIMITING CONDUCTOR TEMPERATURE AFTER SHORT CIRCUIT IS

A

3. Laid singly in Air, Ambient Temp. 35˚ C

FOR ALL CABLES THE MAXIMUM CONDUCTOR OPERATING TEMPERATURE IS 90˚C AND LONGER DRUM LENGTHS ARE AVAILABLE TO SPECIFIC CUSTOMER REQUIREMENTS.

A

g =1.2˚C m/W, depth of laying = 0.8m, laid singly

2. Drawn into Ducts, Ground Temp. = 30˚C &

depth of laying = 0.8m, laid singly

1. Laid Direct, Ground Temp. 30˚C & g =1.2˚C m/W, A

ohm/Km

Approximate AC resistance of Conductor at 90˚C

Sustained Current Ratings

mm ohm/Km

Maximum DC resistance of Conductor at 20˚C

Standard Drum Length

Minimum Bending Radius of Cable (during installation)

Kg/Km m

Approximate Cable Weight

mm

mm

Insulation Thickness (Nominal)

mm

Kg/Km

Weight of Conductor (Approx)

Approximate Overall Diameter

mm

Conductor Diameter (Max)

Outersheath Thickness (Nominal)

mm2

Cable Data

Nominal Area of Conductor

Three Core Aluminium Conductors XLPE Insulated to IEC 60502-2 Steel Tape Armoured

6/10 (12)kV

Table 35

Powerplus

250˚C.

11.28

271

200

236

0.72

0.38

0.34

0.10

0.325

0.253

744

500

4770

62.0

2.9

0.8

1.6

3.4

955

13

120

150

14.10

304

227

267

0.77

0.41

0.29

0.09

0.265

0.206

787

400

5350

66.0

3

0.8

1.6

3.4

1177

14.5

185

240

22.56

414

298

338

0.96

0.51

0.19

0.09

0.162

0.125

899

300

7230

75.0

3.3

0.8

1.8

3.4

1942

18.4

300

28.20

469

334

387

1.0

0.54

0.16

0.09

0.130

0.100

962

250

8450

80.5

3.5

0.8

1.9

3.4

2439

20.6

400

37.60

543

383

436

1.1

0.58

0.14

0.08

0.102

0.0778

1051

200

11380

88.0

3.7

0.8

2

3.4

3122

23.7

1.HCC+ ™ Aluminium Conductor 2.Semiconductive conductor screen 3.DFI™ XLPE Insulation 4.Semiconductive insulation screen 5.Copper tape screen 6. Fillers 7. Tape binder 8. Bedding 9. Galvanised steel tape armour 10. Outer sheath

17.39

354

258

298

0.89

0.47

0.23

0.09

0.211

0.164

833

400

6050

69.5

3.1

0.8

1.7

3.4

1482

16.1

¢SÓ``````HQhÉ``H

BICC

43

ohm/Km ohm/Km µf/Km mA/m

Approximate Reactance at 50 Hertz

Approximate Impedance at 50 Hertz

Approximate Capacitance of Cable

Approx. Charging Current per phase at Uo = 8.7kV and f = 50Hz

One Second Short Circuit Current Rating of Conductor

Single Core Aluminium Conductors XLPE Insulated to IEC 60502-2 Unarmoured

8.7/15 (17.5)kV

4.70

166

156

151

0.60

0.22

0.83

0.13

0.822

0.641

482

500

700

24.5

1.8

4.5

125

8.4

50

6.58

207

191

187

0.68

0.25

0.58

0.13

0.568

0.443

514

500

850

26.0

1.8

4.5

180

9.9

70

8.93

258

227

223

0.77

0.28

0.43

0.12

0.411

0.32

550

500

1000

27.5

1.8

4.5

250

11.6

95

250˚C.

11.28

294

254

249

0.85

0.31

0.34

0.11

0.325

0.253

580

500

1110

29.0

1.9

4.5

313

13

120

Cable Data

LIMITING CONDUCTOR TEMPERATURE AFTER SHORT CIRCUIT IS

A kA

3. Laid in Air in trefoil touching, Ambient Temp. 35˚ C

FOR ALL CABLES THE MAXIMUM CONDUCTOR OPERATING TEMPERATURE IS 90˚C AND LONGER DRUM LENGTHS ARE AVAILABLE TO SPECIFIC CUSTOMER REQUIREMENTS.

A

g =1.2˚C m/W, depth of laying = 0.8m, laid singly

2. Drawn into Ducts, Ground Temp. 30˚C &

depth of laying = 0.8m, laid in trefoil touching

1. Laid Direct, Ground Temp. 30˚C & g =1.2˚C m/W, A

ohm/Km

Approximate AC resistance of Conductor at 90˚C

Sustained Current Ratings

mm ohm/Km

Maximum DC resistance of Conductor at 20˚C

Standard Drum Length

Minimum Bending Radius of Cable (during installation)

Kg/Km m

Approximate Cable Weight

mm

mm

Insulation Thickness (Nominal)

mm

Kg/Km

Weight of Conductor (Approx)

Approximate Overall Diameter

mm

Conductor Diameter (Max)

Outersheath Thickness (Nominal)

mm2

Nominal Area of Conductor

Table 36

Powerplus

150

14.10

336

280

285

0.90

0.33

0.29

0.11

0.265

0.206

612

500

1300

31.0

1.9

4.5

386

14.5

185

17.39

391

312

320

1.0

0.36

0.23

0.11

0.211

0.164

646

500

1480

32.5

2

4.5

486

16.1

240

22.56

460

360

369

1.1

0.41

0.19

0.10

0.162

0.125

696

500

1710

35.0

2

4.5

637

18.4

300

28.20

534

405

423

1.2

0.44

0.16

0.10

0.130

0.100

742

500

1990

37.5

2.1

4.5

800

20.6

500

47.00

727

507

543

1.5

0.54

0.12

0.09

0.080

0.0605

870

500

2870

43.5

2.3

4.5

1318

26.6

630

59.22

837

570

605

1.6

0.59

0.11

0.09

0.064

0.0469

938

500

3440

47.0

2.4

4.5

1672

29.8

800

75.20

975

632

685

1.9

0.68

0.10

0.09

0.051

0.0367

1020

400

3720

51.0

2.5

4.5

2231

33.6

94.00

1095

703

757

2.0

0.72

0.09

0.08

0.043

0.0291

1106

300

4350

55.5

2.7

4.5

2745

37.6

1000

1.HCC+ ™ Aluminium Conductor 2.Semiconductive conductor screen 3.DFI™ XLPE Insulation 4.Semiconductive insulation screen 5.Copper wire screen 6. Tape binder 7. Outer sheath

37.60

616

454

481

1.3

0.49

0.14

0.10

0.102

0.0778

808

500

2400

40.5

2.2

4.5

1024

23.7

400

¢SÓ``````HQhÉ``H

44

BICC ohm/Km ohm/Km µf/Km mA/m

Approximate Reactance at 50 Hertz

Approximate Impedance at 50 Hertz

Approximate Capacitance of Cable

Approx. Charging Current per phase at Uo = 8.7kV and f = 50Hz

kA

One Second Short Circuit Current Rating of Conductor

Three Core Aluminium Conductors XLPE Insulated to IEC 60502-2 Unarmoured

8.7/15 (17.5)kV

50

4.70

163

127

151

0.60

0.22

0.83

0.12

0.822

0.641

749

500

1500

50.0

2.5

4.5

381

8.4

70

6.58

201

156

184

0.68

0.25

0.58

0.11

0.568

0.443

800

500

1840

53.5

2.6

4.5

549

9.9

95

8.93

239

189

217

0.77

0.28

0.43

0.11

0.411

0.32

858

500

2260

57.5

2.8

4.5

762

11.6

LIMITING CONDUCTOR TEMPERATURE AFTER SHORT CIRCUIT IS

A

3. Laid singly in Air, Ambient Temp. 35˚ C

FOR ALL CABLES THE MAXIMUM CONDUCTOR OPERATING TEMPERATURE IS 90˚C AND LONGER DRUM LENGTHS ARE AVAILABLE TO SPECIFIC CUSTOMER REQUIREMENTS.

A

g =1.2˚C m/W, depth of laying = 0.8m, laid singly

2. Drawn into Ducts, Ground Temp. 30˚C &

depth of laying = 0.8m, laid singly

1. Laid Direct, Ground Temp. 30˚C & g =1.2˚C m/W, A

ohm/Km

Approximate AC resistance of Conductor at 90˚C

Sustained Current Ratings

mm ohm/Km

Maximum DC resistance of Conductor at 20˚C

Standard Drum Length

Minimum Bending Radius of Cable (during installation)

Kg/Km m

Approximate Cable Weight

mm

mm

Insulation Thickness (Nominal)

mm

Kg/Km

Weight of Conductor (Approx)

Approximate Overall Diameter

mm

Conductor Diameter (Max)

Outersheath Thickness (Nominal)

mm2

Cable Data

Nominal Area of Conductor

Table 37

Powerplus

250˚C.

11.28

282

212

250

0.85

0.31

0.34

0.10

0.325

0.253

908

500

2650

60.5

2.9

4.5

955

13

120

150

14.10

316

241

283

0.90

0.33

0.29

0.10

0.265

0.206

959

500

3060

64.0

3

4.5

1177

14.5

185

240

22.56

431

316

358

1.1

0.41

0.19

0.09

0.162

0.125

1094

300

4470

73.0

3.2

4.5

1942

18.4

300

28.20

488

354

410

1.2

0.44

0.16

0.09

0.130

0.100

1170

300

5290

78.0

3.4

4.5

2439

20.6

400

37.60

565

406

462

1.3

0.49

0.14

0.09

0.102

0.0778

1277

250

7680

85.5

3.6

4.5

3122

23.7

1.HCC+ ™ Aluminium Conductor 2.Semiconductive conductor screen 3.DFI™ XLPE Insulation 4.Semiconductive insulation screen 5.Copper tape screen 6. Fillers 7. Tape binder 8. Outer sheath

17.39

368

274

316

1.0

0.36

0.23

0.10

0.211

0.164

1014

400

3610

68.0

3.1

4.5

1482

16.1

¢SÓ``````HQhÉ``H

BICC

45

mA/m

Approx. Charging Current per phase at Uo = 8.7kV and f = 50Hz

kA

One Second Short Circuit Current Rating of Conductor

Single Core Aluminium Conductors XLPE Insulated to IEC 60502-2 Aluminium Wire Armoured

8.7/15 (17.5)kV

4.70

179

151

151

0.60

0.22

0.83

0.14

0.822

0.641

452

500

1110

30.5

1.9

1.6

1.2

4.5

125

8.4

50

6.58

221

187

187

0.68

0.25

0.58

0.13

0.568

0.443

476

500

1230

32.0

2

1.6

1.2

4.5

180

9.9

70

8.93

271

218

223

0.77

0.28

0.43

0.13

0.411

0.32

515

500

1470

34.5

2

2

1.2

4.5

250

11.6

95

250˚C.

11.28

327

245

249

0.85

0.31

0.34

0.12

0.325

0.253

537

500

1660

36.0

2.1

2

1.2

4.5

313

13

120

Cable Data

LIMITING CONDUCTOR TEMPERATURE AFTER SHORT CIRCUIT IS

A

3. Laid in Air in trefoil touching, Ambient Temp. 35˚ C

FOR ALL CABLES THE MAXIMUM CONDUCTOR OPERATING TEMPERATURE IS 90˚C AND LONGER DRUM LENGTHS ARE AVAILABLE TO SPECIFIC CUSTOMER REQUIREMENTS.

A

g =1.2˚C m/W, depth of laying = 0.8m, laid singly

2. Drawn into Ducts, Ground Temp. 30˚C &

depth of laying = 0.8m, laid in trefoil touching

1. Laid Direct, Ground Temp. 30˚C & g =1.2˚C m/W, A

µf/Km

Approximate Capacitance of Cable

Sustained Current Ratings

ohm/Km ohm/Km

ohm/Km

Approximate AC resistance of Conductor at 90˚C

Approximate Impedance at 50 Hertz

ohm/Km

Maximum DC resistance of Conductor at 20˚C

Approximate Reactance at 50 Hertz

m

Approximate Cable Weight

mm

Kg/Km

Approximate Overall Diameter

Minimum Bending Radius of Cable (during installation)

mm

Outersheath Thickness (Nominal)

Standard Drum Length

mm mm

Armour Wire Diameter (Nominal)

mm mm

Kg/Km

Weight of Conductor (Approx)

Separation Sheath Thickness

mm

Conductor Diameter (Max)

Insulation Thickness (Nominal)

mm2

Nominal Area of Conductor

Table 38

Powerplus

14.10

350

267

280

0.90

0.33

0.29

0.12

0.265

0.206

561

500

1840

37.5

2.1

2

1.2

4.5

386

14.5

150

17.39

400

298

316

1.0

0.36

0.23

0.12

0.211

0.164

587

500

1960

39.5

2.2

2

1.2

4.5

486

16.1

185

22.56

469

338

360

1.1

0.41

0.19

0.11

0.162

0.125

624

500

2350

42.0

2.3

2

1.2

4.5

637

18.4

240

28.20

534

374

405

1.2

0.44

0.16

0.11

0.13

0.100

660

500

2570

44.0

2.3

2

1.2

4.5

800

20.6

300

47.00

708

445

507

1.5

0.54

0.12

0.10

0.080

0.0605

776

500

3740

52.0

2.6

2.5

1.3

4.5

1318

26.6

500

59.22

810

490

570

1.6

0.59

0.11

0.10

0.064

0.0469

828

400

4340

55.5

2.7

2.5

1.4

4.5

1672

29.8

630

75.20

902

525

623

1.9

0.68

0.10

0.09

0.051

0.0367

893

300

5240

59.5

2.8

2.5

1.5

4.5

2231

33.6

800

94.00

994

570

676

2.0

0.72

0.10

0.09

0.043

0.0291

959

300

6040

64.0

3

2.5

1.6

4.5

2745

37.6

1000

1.HCC+ ™ Aluminium Conductor 2.Semiconductive conductor screen 3.DFI™ XLPE Insulation 4.Semiconductive insulation screen 5.Copper tape screen 6. Bedding 7. Aluminium armour 8. Outer sheath

37.60

616

405

454

1.3

0.49

0.14

0.11

0.102

0.0778

728

500

3110

48.5

2.5

2.5

1.3

4.5

1024

23.7

400

¢SÓ``````HQhÉ``H

46

BICC 58.5

ohm/Km ohm/Km µf/Km mA/m

Approximate Reactance at 50 Hertz

Approximate Impedance at 50 Hertz

Approximate Capacitance of Cable

Approx. Charging Current per phase at Uo = 8.7kV and f = 50Hz

kA

One Second Short Circuit Current Rating of Conductor

Three Core Aluminium Conductors XLPE Insulated to IEC 60502-2 Steel Wire Armoured

4.70

156

120

142

0.60

0.12

0.822

0.641

6.58

193

147

174

0.68

0.25

0.58

0.11

0.568

0.443

742

500

5660

62.0

2.9

2.5

1.5

4.5

549

9.9

70

8.93

230

178

205

0.77

0.28

0.43

0.11

0.411

0.32

791

400

6360

66.0

3

2.5

1.6

4.5

762

11.6

95

LIMITING CONDUCTOR TEMPERATURE AFTER SHORT CIRCUIT IS

A

3. Laid singly in Air, Ambient Temp. 35˚ C

FOR ALL CABLES THE MAXIMUM CONDUCTOR OPERATING TEMPERATURE IS 90˚C AND LONGER DRUM LENGTHS ARE AVAILABLE TO SPECIFIC CUSTOMER REQUIREMENTS.

A

g =1.2˚C m/W, depth of laying = 0.8m, laid singly

2. Drawn into ducts, Ground Temp. = 30˚C &

depth of laying = 0.8m, laid singly

1. Laid Direct, Ground Temp. 30˚C & g =1.2˚C m/W, A

0.22

ohm/Km

Sustained Current Ratings

0.83

ohm/Km

Approximate AC resistance of Conductor at 90˚C

698

500

5050

Maximum DC resistance of Conductor at 20˚C

Kg/Km

Approximate Cable Weight m

mm

Approximate Overall Diameter

2.8

2.5

mm

mm

Outersheath Thickness (Nominal)

Minimum Bending Radius of Cable (during installation)

mm

Armour Wire Diameter (Nominal)

1.5

4.5

381

8.4

50

Standard Drum Length

mm mm

Kg/Km

Weight of Conductor (Approx)

Separation Sheath Thickness

mm

Conductor Diameter (Max)

Insulation Thickness (Nominal)

mm2

Cable Data

Nominal Area of Conductor

8.7/15 (17.5)kV

Table 39

Powerplus

250˚C.

11.28

271

200

236

0.85

0.31

0.34

0.10

0.325

0.253

832

400

6890

69.5

3.2

2.5

1.7

4.5

955

13

120

14.10

304

227

267

0.90

0.33

0.29

0.10

0.265

0.206

874

300

8420

73.0

3.3

2.5

1.7

4.5

1177

14.5

150

22.56

414

298

338

1.1

0.41

0.19

0.09

0.162

0.125

1003

250

10420

84.0

3.6

3.15

1.9

4.5

1942

18.4

240

28.20

469

334

387

1.2

0.44

0.16

0.09

0.130

0.100

1066

200

11710

89.0

3.8

3.15

2

4.5

2439

20.6

300

37.60

543

383

436

1.3

0.49

0.14

0.09

0.102

0.0778

1154

200

13500

96.5

4

3.15

2.1

4.5

3122

23.7

400

1.HCC+ ™ Aluminium Conductor 2.Semiconductive conductor screen 3.DFI™ XLPE Insulation 4.Semiconductive insulation screen 5.Copper tape screen 6. Fillers 7. Tape binder 8. Bedding 9. Galvanised steel wire armour 10. Outer sheath

17.39

354

258

298

1.0

0.36

0.23

0.010

0.211

0.164

936

250

9270

78.5

3.4

3.15

1.8

4.5

1482

16.1

185

¢SÓ``````HQhÉ``H

BICC

47

µf/Km mA/m

Approximate Impedance at 50 Hertz

Approximate Capacitance of Cable

Approx. Charging Current per phase at Uo = 8.7kV and f = 50Hz

A kA

3. Laid singly in Air, Ambient Temp. 35˚ C

One Second Short Circuit Current Rating of Conductor

4.70

156

120

142

0.60

0.22

0.83

0.12

0.822

0.641

676

500

3750

56.5

2.7

0.8

381

70

6.58

193

147

174

0.68

0.25

0.58

0.11

0.568

0.443

719

500

4220

60.0

2.9

0.8

1.5

4.5

549

9.9

95

8.93

230

178

205

0.77

0.28

0.43

0.11

0.411

0.32

768

500

4830

64.0

3

0.8

1.6

4.5

762

11.6

11.28

271

200

236

0.85

0.31

0.34

0.10

0.325

0.253

808

500

5400

67.5

Three Core Aluminium Conductors XLPE Insulated to IEC 60502-2 Steel Tape Armoured

3.1

0.8

1.7

4.5

955

13

120

FOR ALL CABLES THE MAXIMUM CONDUCTOR OPERATING TEMPERATURE IS 90˚C AND LIMITING CONDUCTOR TEMPERATURE AFTER SHORT CIRCUIT IS 250˚C. LONGER DRUM LENGTHS ARE AVAILABLE TO SPECIFIC CUSTOMER REQUIREMENTS.

A

g =1.2˚C m/W, depth of laying = 0.8m, laid singly

2. Drawn into Ducts, Ground Temp. = 30˚C &

depth of laying = 0.8m, laid singly

1. Laid Direct, Ground Temp. 30˚C & g =1.2˚C m/W, A

ohm/Km

Approximate Reactance at 50 Hertz

Sustained Current Ratings

ohm/Km ohm/Km

Approximate AC resistance of Conductor at 90˚C

mm

m

Standard Drum Length ohm/Km

Kg/Km

Approximate Cable Weight

Maximum DC resistance of Conductor at 20˚C

mm

Approximate Overall Diameter

Minimum Bending Radius of Cable (during installation)

mm

Outersheath Thickness (Nominal)

1.5

mm mm

Insulation Thickness (Nominal)

Separation Sheath Thickness

Kg/Km mm

Weight of Conductor (Approx)

Steel Tape Thickness (Nominal)

4.5

mm

Conductor Diameter (Max)

8.4

mm2

50

Cable Data

Nominal Area of Conductor

8.7/15 (17.5)kV

Table 40

Powerplus

150

14.10

304

227

267

0.90

0.33

0.29

0.10

0.265

0.206

851

400

6010

71.0

3.2

0.8

1.7

4.5

1177

14.5

185

240

22.56

414

298

338

1.1

0.41

0.19

0.09

0.162

0.125

962

300

8000

80.5

3.5

0.8

1.9

4.5

1942

18.4

300

400

93.0

3.9

0.8

2.1

4.5

3122

23.7

1115

200

28.20

469

334

387

1.2

0.44

0.16

0.09

0.130

37.60

543

383

436

1.3

0.49

0.14

0.09

0.102

0.100 0.0778

1026

250

10270 12420

85.5

3.6

0.8

2

4.5

2439

20.6

1.HCC+ ™ Aluminium Conductor 2.Semiconductive conductor screen 3.DFI™ XLPE Insulation 4.Semiconductive insulation screen 5.Copper tape screen 6. Fillers 7. Tape binder 8. Bedding 9. Galvanised steel tape armour 10. Outer sheath

17.39

354

258

298

1.0

0.36

0.23

0.10

0.211

0.164

896

300

6840

75.0

3.3

0.8

1.8

4.5

1482

16.1

¢SÓ``````HQhÉ``H

48

BICC ohm/Km ohm/Km µf/Km mA/m

Approximate Reactance at 50 Hertz

Approximate Impedance at 50 Hertz

Approximate Capacitance of Cable

Approx. Charging Current per phase at Uo = 12kV and F = 50Hz

One Second Short Circuit Current Rating of Conductor

Single Core Aluminium Conductors XLPE Insulated to IEC 60502-2 Unarmoured

12/20 (24)kV

4.70

175

156

151

0.68

0.18

0.83

0.14

0.822

0.641

526

500

810

26.5

1.8

5.5

125

8.4

50

6.58

216

187

187

0.79

0.21

0.58

0.13

0.568

0.443

558

500

960

28.0

1.8

5.5

180

9.9

70

8.93

258

223

223

0.87

0.23

0.43

0.12

0.411

0.32

594

500

1110

30.0

1.9

5.5

250

11.6

95

250˚C.

11.28

304

249

249

0.94

0.25

0.34

0.12

0.325

0.253

624

500

1250

31.5

1.9

5.5

313

13

120

Cable Data

LIMITING CONDUCTOR TEMPERATURE AFTER SHORT CIRCUIT IS

A kA

3. Laid in Air in trefoil touching, Ambient Temp. 35˚ C

FOR ALL CABLES THE MAXIMUM CONDUCTOR OPERATING TEMPERATURE IS 90˚C AND LONGER DRUM LENGTHS ARE AVAILABLE TO SPECIFIC CUSTOMER REQUIREMENTS.

A

g =1.2˚C m/W, depth of laying = 0.8m, laid singly

2. Drawn into Ducts, Ground Temp. 30˚C &

depth of laying = 0.8m, laid in trefoil touching

1. Laid Direct, Ground Temp. 30˚C & g =1.2˚C m/W, A

ohm/Km

Approximate AC resistance of Conductor at 90˚C

Sustained Current Ratings

mm ohm/Km

Maximum DC resistance of Conductor at 20˚C

Standard Drum Length

Minimum Bending Radius of Cable (during installation)

Kg/Km m

Approximate Cable Weight

mm

mm

Insulation Thickness (Nominal)

mm

Kg/Km

Weight of Conductor (Approx)

Approximate Overall Diameter

mm

Conductor Diameter (Max)

Outersheath Thickness (Nominal)

mm2

Nominal Area of Conductor

Table 41

Powerplus

150

14.10

345

285

285

1.0

0.27

0.29

0.12

0.265

0.206

656

500

1450

33.0

2

5.5

386

14.5

185

17.39

396

369

320

1.1

0.29

0.23

0.11

0.211

0.164

690

500

1610

34.5

2

5.5

486

16.1

240

22.56

469

409

369

1.2

0.32

0.19

0.11

0.162

0.125

738

500

1850

37.0

2.1

5.5

637

18.4

300

28.20

534

463

423

1.3

0.35

0.16

0.10

0.130

0.100

786

500

2110

39.5

2.2

5.5

800

20.6

500

47.00

727

579

543

1.6

0.43

0.12

0.10

0.080

0.0605

914

500

3000

46.0

2.4

5.5

1318

26.6

630

59.22

846

685

614

1.8

0.48

0.11

0.10

0.064

0.0469

982

500

3600

49.5

2.5

5.5

1672

29.8

800

75.20

975

712

685

2.0

0.53

0.10

0.09

0.051

0.0367

1062

400

3930

53.5

2.6

5.5

2231

33.6

94.00

1113

703

765

2.2

0.58

0.10

0.09

0.043

0.0291

1148

300

4540

57.5

2.7

5.5

2745

37.6

1000

1.HCC+ ™ Aluminium Conductor 2.Semiconductive conductor screen 3.DFI™ XLPE Insulation 4.Semiconductive insulation screen 5.Copper wire screen 6. Tape binder 7. Outer sheath

37.60

626

507

490

1.5

0.39

0.14

0.10

0.102

0.0778

852

500

2520

43.0

2.3

5.5

1024

23.7

400

¢SÓ``````HQhÉ``H

BICC

49

ohm/Km µf/Km mA/m

Approximate Impedance at 50 Hertz

Approximate Capacitance of Cable

Approx. Charging Current per phase at Uo = 12kV and F = 50Hz

kA

One Second Short Circuit Current Rating of Conductor

50

4.70

167

132

151

0.68

0.18

0.83

0.12

0.822

0.641

818

500

3200

54.5

2.7

5.5

381

8.4

70

6.58

206

160

184

0.79

0.21

0.58

0.12

0.568

0.443

869

500

3720

58.0

2.8

5.5

549

9.9

95

8.93

249

193

217

0.87

0.23

0.43

0.11

0.411

0.32

929

500

4290

62.0

2.9

5.5

762

11.6

LIMITING CONDUCTOR TEMPERATURE AFTER SHORT CIRCUIT IS

A

3. Laid singly in Air, Ambient Temp. 35˚ C

FOR ALL CABLES THE MAXIMUM CONDUCTOR OPERATING TEMPERATURE IS 90˚C AND LONGER DRUM LENGTHS ARE AVAILABLE TO SPECIFIC CUSTOMER REQUIREMENTS.

A

g =1.2˚C m/W, depth of laying = 0.8m, laid singly

2. Drawn into Ducts, Ground Temp. 30˚C &

depth of laying = 0.8m, laid singly

1. Laid Direct, Ground Temp. 30˚C & g =1.2˚C m/W,

Three Core Aluminium Conductors XLPE Insulated to IEC 60502-2 Unarmoured

12/20 (24)kV

ohm/Km

Approximate Reactance at 50 Hertz

A

ohm/Km

Approximate AC resistance of Conductor at 90˚C

Sustained Current Ratings

mm ohm/Km

Maximum DC resistance of Conductor at 20˚C

Standard Drum Length

Minimum Bending Radius of Cable (during installation)

Kg/Km m

Approximate Cable Weight

mm

mm

Insulation Thickness (Nominal)

mm

Kg/Km

Weight of Conductor (Approx)

Approximate Overall Diameter

mm

Conductor Diameter (Max)

Outersheath Thickness (Nominal)

mm2

Cable Data

Nominal Area of Conductor

Table 42

Powerplus

250˚C.

11.28

287

222

245

0.94

0.25

0.34

0.11

0.325

0.253

977

500

4830

65.5

3

5.5

955

13

120

150

14.10

321

250

274

1.0

0.27

0.29

0.10

0.265

0.206

1028

500

5440

68.5

3.1

5.5

1177

14.5

185

240

22.56

440

325

358

1.2

0.32

0.19

0.10

0.162

0.125

1163

300

7250

77.5

3.4

5.5

1942

18.4

300

28.20

498

363

401

1.3

0.35

0.16

0.09

0.130

0.100

1239

300

8400

83.0

3.5

5.5

2439

20.6

400

37.60

574

410

453

1.5

0.39

0.14

0.09

0.102

0.0778

1346

200

9630

90.0

3.8

5.5

3122

23.7

1.HCC+ ™ Aluminium Conductor 2.Semiconductive conductor screen 3.DFI™ XLPE Insulation 4.Semiconductive insulation screen 5.Copper tape screen 6. Fillers 7. Tape binder 8. Outer sheath

17.39

373

283

311

1.1

0.29

0.23

0.10

0.211

0.164

1083

400

6140

72.5

3.2

5.5

1482

16.1

¢SÓ``````HQhÉ``H

50

BICC ohm/Km ohm/Km µf/Km mA/m

Approximate AC resistance of Conductor at 90˚C

Approximate Reactance at 50 Hertz

Approximate Impedance at 50 Hertz

Approximate Capacitance of Cable

Approx. Charging Current per phase at Uo = 12kV and F = 50Hz

A kA

3. Laid in Air in trefoil touching, Ambient Temp. 35˚ C

One Second Short Circuit Current Rating of Conductor

4.70

184

151

151

0.68

0.18

0.83

0.15

0.822

0.641

483

500

1210

32.5

2

1.6

1.2

5.5

125

8.4

50

6.58

225

182

187

0.79

0.21

0.58

0.14

0.568

0.443

519

500

1380

35.0

2.1

2

1.2

5.5

180

9.9

70

8.93

271

218

218

0.87

0.23

0.43

0.13

0.411

0.32

548

500

1620

36.5

2.1

2

1.2

5.5

250

11.6

95

11.28

313

245

249

0.94

0.25

0.34

0.13

0.325

0.253

570

500

1760

38.0

2.2

2

1.2

5.5

313

13

120

Cable Data

Single Core Aluminium Conductors XLPE Insulated to IEC 60502-2 Aluminium Wire Armoured

12/20 (24)kV

FOR ALL CABLES THE MAXIMUM CONDUCTOR OPERATING TEMPERATURE IS 90˚C AND LIMITING CONDUCTOR TEMPERATURE AFTER SHORT CIRCUIT IS 250˚C. LONGER DRUM LENGTHS ARE AVAILABLE TO SPECIFIC CUSTOMER REQUIREMENTS.

A

g =1.2˚C m/W, depth of laying = 0.8m, laid singly

2. Drawn into Ducts, Ground Temp. 30˚C &

depth of laying = 0.8m, laid in trefoil touching

1. Laid Direct, Ground Temp. 30˚C & g =1.2˚C m/W, A

ohm/Km

Maximum DC resistance of Conductor at 20˚C

Sustained Current Ratings

mm ohm/Km

Minimum Bending Radius of Cable (during installation)

Kg/Km m

Standard Drum Length

Approximate Overall Diameter

Approximate Cable Weight

mm mm

Outersheath Thickness (Nominal)

mm

mm

Insulation Thickness (Nominal)

mm

Kg/Km

Weight of Conductor (Approx)

Armour Wire Diameter (Nominal)

mm

Conductor Diameter (Max)

Separation Sheath Thickness

mm2

Nominal Area of Conductor

Table 43

Powerplus

150

14.10

354

267

276

1.0

0.27

0.29

0.12

0.265

0.206

593

500

1940

.9.5

2.2

2

1.2

5.5

386

14.5

185

17.39

405

298

312

1.1

0.29

0.23

0.12

0.211

0.164

618

500

2110

41.5

2.3

2

1.2

5.5

486

16.1

240

22.56

469

338

360

1.2

0.32

0.19

0.11

0.162

0.125

657

500

2500

44.0

2.3

2

1.2

5.5

637

18.4

300

28.20

534

369

401

1.3

0.35

0.16

0.11

0.130

0.100

710

500

2920

47.5

2.4

2.5

1.3

5.5

800

20.6

500

47.00

708

454

507

1.6

0.43

0.13

0.10

0.080

0.0605

809

500

3990

54.0

2.7

2.5

1.4

5.5

1318

26.6

630

59.22

810

498

570

1.8

0.48

0.12

0.10

0.064

0.0469

863

400

4540

57.5

2.8

2.5

1.5

5.5

1672

29.8

800

75.20

902

534

623

2.0

0.53

0.12

0.10

0.051

0.0367

926

300

5490

62.0

2.9

2.5

1.5

5.5

2231

33.6

94.00

994

570

676

2.2

0.58

0.11

0.09

0.043

0.0291

992

300

6280

66.5

3

2.5

1.6

5.5

2745

37.6

1000

1.HCC+ ™ Aluminium Conductor 2.Semiconductive conductor screen 3.DFI™ XLPE Insulation 4.Semiconductive insulation screen 5.Copper tape screen 6. Bedding 7. Aluminium armour 8. Outer sheath

37.60

616

409

454

1.5

0.39

0.14

0.11

0.102

0.0778

761

500

3360

51.0

2.6

2.5

1.3

5.5

1024

23.7

400

¢SÓ``````HQhÉ``H

BICC

51

ohm/Km ohm/Km µf/Km mA/m

Approximate AC resistance of Conductor at 90˚C

Approximate Reactance at 50 Hertz

Approximate Impedance at 50 Hertz

Approximate Capacitance of Cable

Approx. Charging Current per phase at Uo = 12kV and F = 50Hz

kA

One Second Short Circuit Current Rating of Conductor

50

4.70

161

124

142

0.68

0.18

0.83

0.12

0.822

0.641

757

500

5650

63.5

3

2.5

1.6

5.5

381

8.4

70

6.58

198

151

174

0.79

0.21

0.58

0.12

0.568

0.443

799

400

6260

67.0

3.1

2.5

1.6

5.5

549

9.9

95

8.93

239

182

205

0.87

0.23

0.43

0.11

0.411

0.32

848

300

6960

71.0

3.2

2.5

1.7

5.5

762

11.6

LIMITING CONDUCTOR TEMPERATURE AFTER SHORT CIRCUIT IS

A

3. Laid singly in Air, Ambient Temp. 35˚ C

FOR ALL CABLES THE MAXIMUM CONDUCTOR OPERATING TEMPERATURE IS 90˚C AND LONGER DRUM LENGTHS ARE AVAILABLE TO SPECIFIC CUSTOMER REQUIREMENTS.

A

g =1.2˚C m/W, depth of laying = 0.8m, laid singly

2. Drawn into ducts, Ground Temp. = 30˚C &

depth of laying = 0.8m, laid singly

1. Laid Direct, Ground Temp. 30˚C & g =1.2˚C m/W, A

ohm/Km

Maximum DC resistance of Conductor at 20˚C

Sustained Current Ratings

mm ohm/Km

Minimum Bending Radius of Cable (during installation)

Kg/Km m

Standard Drum Length

Approximate Overall Diameter

Approximate Cable Weight

mm mm

Outersheath Thickness (Nominal)

mm

mm

Insulation Thickness (Nominal)

mm

Kg/Km

Weight of Conductor (Approx)

Armour Wire Diameter (Nominal)

mm

Conductor Diameter (Max)

Separation Sheath Thickness

mm2

Cable Data

Nominal Area of Conductor

Three Core Aluminium Conductors XLPE Insulated to IEC 60502-2 Steel Wire Armoured

12/20 (24)kV

Table 44

Powerplus

250˚C.

11.28

276

209

231

0.94

0.25

0.34

0.11

0.325

0.253

906

300

8440

75.5

3.4

3.15

1.7

5.5

955

13

120

150

14.10

308

236

258

1.0

0.27

0.29

0.10

0.265

0.206

948

300

9130

79.0

3.5

3.15

1.8

5.5

1177

14.5

185

240

22.56

423

307

338

1.2

0.32

0.19

0.10

0.162

0.125

1061

200

11220

89.0

3.8

3.15

2

5.5

1942

18.4

300

28.20

478

343

378

1.3

0.35

0.16

0.09

0.130

0.100

1123

200

12560

94.0

3.9

3.15

2.1

5.5

2439

20.6

400

37.60

552

387

427

1.5

0.39

0.14

0.09

0.102

0.0778

1213

200

14400

101.5

4.2

3.15

2.2

5.5

3122

23.7

1.HCC+ ™ Aluminium Conductor 2.Semiconductive conductor screen 3.DFI™ XLPE Insulation 4.Semiconductive insulation screen 5.Copper tape screen 6. Fillers 7. Tape binder 8. Bedding 9. Galvanised steel wire armour 10. Outer sheath

17.39

359

267

294

1.1

0.29

0.23

0.10

0.211

0.164

995

250

10020

83.0

3.6

3.15

1.9

5.5

1482

16.1

¢SÓ``````HQhÉ``H

52

BICC mm mm

Separation Sheath Thickness

Steel Tape Thickness (Nominal)

ohm/Km ohm/Km µf/Km mA/m

Approximate Reactance at 50 Hertz

Approximate Impedance at 50 Hertz

Approximate Capacitance of Cable

Approx. Charging Current per phase at Uo = 12kV and F = 50Hz

A kA

3. Laid singly in Air, Ambient Temp. 35˚ C

One Second Short Circuit Current Rating of Conductor

Three Core Aluminium Conductors XLPE Insulated to IEC 60502-2 Steel Tape Armoured

50

4.70

161

125

142

0.68

0.18

0.83

0.12

0.822

0.641

734

500

4220

61.5

2.9

0.8

1.6

5.5

381

8.4

70

6.58

198

151

174

0.79

0.21

0.58

0.12

0.568

0.443

778

500

4800

65.0

3

0.8

1.6

5.5

549

9.9

95

8.93

239

182

205

0.87

0.23

0.43

0.11

0.411

0.32

826

500

5390

69.0

3.1

0.8

1.7

5.5

762

11.6

LIMITING CONDUCTOR TEMPERATURE AFTER SHORT CIRCUIT IS

A

g =1.2˚C m/W, depth of laying = 0.8m, laid singly

2. Drawn into Ducts, Ground Temp. = 30˚C &

depth of laying = 0.8m, laid singly

1. Laid Direct, Ground Temp. 30˚C & g =1.2˚C m/W, A

ohm/Km

Approximate AC resistance of Conductor at 90˚C

Sustained Current Ratings

mm ohm/Km

Maximum DC resistance of Conductor at 20˚C

Standard Drum Length

Minimum Bending Radius of Cable (during installation)

Kg/Km m

Approximate Cable Weight

mm

mm

Insulation Thickness (Nominal)

mm

Kg/Km

Weight of Conductor (Approx)

Approximate Overall Diameter

mm

Conductor Diameter (Max)

Outersheath Thickness (Nominal)

mm2

Nominal Area of Conductor

Cable Data

FOR ALL CABLES THE MAXIMUM CONDUCTOR OPERATING TEMPERATURE IS 90˚C AND LONGER DRUM LENGTHS ARE AVAILABLE TO SPECIFIC CUSTOMER REQUIREMENTS.

12/20 (24)kV

Table 45

Powerplus

250˚C.

11.28

276

209

231

0.94

0.25

0.34

0.11

0.325

0.253

866

400

5990

72.5

3.2

0.8

1.7

5.5

955

13

120

150

14.10

308

236

258

1.0

0.27

0.29

0.10

0.265

0.206

910

400

6740

76.0

3.4

0.8

1.8

5.5

1177

14.5

185

17.39

359

267

294

1.1

0.29

0.23

0.10

0.211

0.164

955

300

7540

80.0

3.5

0.8

1.9

5.5

1482

16.1

300

28.20

478

343

378

1.3

0.35

0.16

0.09

0.130

0.100

1085

200

10850

90.5

3.8

0.8

2.1

5.5

2439

20.6

400

37.60

552

387

427

1.5

0.39

0.14

0.09

0.102

0.0778

1174

200

13390

98.0

4

0.8

2.2

5.5

3122

23.7

1.HCC+ ™ Aluminium Conductor 2.Semiconductive conductor screen 3.DFI™ XLPE Insulation 4.Semiconductive insulation screen 5.Copper tape screen 6. Fillers 7. Tape binder 8. Bedding 9. Galvanised steel tape armour 10. Outer sheath

22.56

423

307

338

1.2

0.32

0.19

0.10

0.162

0.125

1021

250

9570

85.5

3.6

0.8

2

5.5

1942

18.4

240

¢SÓ``````HQhÉ``H

BICC

53

ohm/Km ohm/Km µf/Km mA/m

Approximate Reactance at 50 Hertz

Approximate Impedance at 50 Hertz

Approximate Capacitance of Cable

Approx. Charging Current per phase at Uo = 18kV and F = 50Hz

One Second Short Circuit Current Rating of Conductor

Single Core Aluminium Conductors XLPE Insulated to IEC 60502-2 Unarmoured

18/30 (36)kV

4.70

175

156

151

0.79

0.14

0.83

0.15

0.822

0.641

632

500

1120

32.0

2

8

125

8.4

50

6.58

216

182

187

0.9

0.16

0.59

0.14

0.568

0.443

664

500

1260

33.5

2

8

180

9.9

70

8.93

258

218

223

1.0

0.18

0.43

0.14

0.411

0.32

700

500

1450

35.0

2.1

8

250

11.6

95

250˚C.

11.28

304

245

249

1.1

0.19

0.35

0.13

0.325

0.253

730

500

1570

36.5

2.1

8

313

13

120

Cable Data

LIMITING CONDUCTOR TEMPERATURE AFTER SHORT CIRCUIT IS

A kA

3. Laid in Air in trefoil touching, Ambient Temp. 35˚ C

FOR ALL CABLES THE MAXIMUM CONDUCTOR OPERATING TEMPERATURE IS 90˚C AND LONGER DRUM LENGTHS ARE AVAILABLE TO SPECIFIC CUSTOMER REQUIREMENTS.

A

g =1.2˚C m/W, depth of laying = 0.8m, laid singly

2. Drawn into Ducts, Ground Temp. 30˚C &

depth of laying = 0.8m, laid in trefoil touching

1. Laid Direct, Ground Temp. 30˚C & g =1.2˚C m/W, A

ohm/Km

Approximate AC resistance of Conductor at 90˚C

Sustained Current Ratings

mm ohm/Km

Maximum DC resistance of Conductor at 20˚C

Standard Drum Length

Minimum Bending Radius of Cable (during installation)

Kg/Km m

Approximate Cable Weight

mm

mm

Insulation Thickness (Nominal)

mm

Kg/Km

Weight of Conductor (Approx)

Approximate Overall Diameter

mm

Conductor Diameter (Max)

Outersheath Thickness (Nominal)

mm2

Nominal Area of Conductor

Table 46

Powerplus

150

14.10

345

267

285

1.1

0.20

0.29

0.13

0.265

0.206

762

500

1780

38.5

2.2

8

386

14.5

185

17.39

396

298

320

1.2

0.22

0.24

0.12

0.211

0.164

796

500

1940

40.0

2.2

8

486

16.1

240

22.56

469

338

369

1.4

0.24

0.2

0.12

0.161

0.125

846

500

2230

42.5

2.3

8

637

18.4

300

28.20

534

369

423

1.5

0.26

0.17

0.11

0.129

0.100

892

500

2580

45.0

2.4

8

800

20.6

500

47.00

727

454

543

1.8

0.32

0.13

0.10

0.080

0.0605

1020

500

3600

51.0

2.6

8

1318

26.6

630

59.22

846

498

614

2.0

0.35

0.12

0.10

0.063

0.0469

1088

500

4270

54.5

2.7

8

1672

29.8

800

75.20

984

534

694

2.3

0.40

0.11

0.10

0.051

0.0367

1170

400

4460

58.5

2.8

8

2231

33.6

1254

300

5110

63.0

2.9

8

2745

37.6

1000

94.00

1113

570

765

2.5

0.44

0.10

0.09

0.042

0.0291

1.HCC+ ™ Aluminium Conductor 2.Semiconductive conductor screen 3.DFI™ XLPE Insulation 4.Semiconductive insulation screen 5.Copper wire screen 6. Tape binder 7. Outer sheath

37.60

626

409

490

1.6

0.29

0.15

0.11

0.101

0.0778

958

500

2990

48.0

2.5

8

1024

23.7

400

¢SÓ``````HQhÉ``H

54

BICC ohm/Km ohm/Km ohm/Km µf/Km mA/m

Maximum DC resistance of Conductor at 20˚C

Approximate AC resistance of Conductor at 90˚C

Approximate Reactance at 50 Hertz

Approximate Impedance at 50 Hertz

Approximate Capacitance of Cable

Approx. Charging Current per phase at Uo = 18kV and F = 50Hz

kA

One Second Short Circuit Current Rating of Conductor

50

4.7

167

132

151

0.79

0.14

0.83

0.136

0.822

0.641

990

500

4480

66

3.1

8

381

8.4

70

6.58

206

160

184

0.90

0.16

0.58

0.128

0.568

0.443

1043

500

5120

69.5

3.2

8

549

9.9

95

8.93

249

193

217

1.0

0.18

0.43

0.122

0.411

0.32

1101

500

5800

73.4

3.3

8

762

11.6

LIMITING CONDUCTOR TEMPERATURE AFTER SHORT CIRCUIT IS

A

3. Laid singly in Air, Ambient Temp. 35˚ C

FOR ALL CABLES THE MAXIMUM CONDUCTOR OPERATING TEMPERATURE IS 90˚C AND LONGER DRUM LENGTHS ARE AVAILABLE TO SPECIFIC CUSTOMER REQUIREMENTS.

A

g =1.2˚C m/W, depth of laying = 0.8m, laid singly

2. Drawn into Ducts, Ground Temp. 30˚C &

depth of laying = 0.8m, laid singly

1. Laid Direct, Ground Temp. 30˚C & g =1.2˚C m/W,

Three Core Aluminium Conductors XLPE Insulated to IEC 60502-2 Unarmoured

18/30 (36)kV

ohm/Km

Minimum Bending Radius of Cable (during installation)

A

mm

Standard Drum Length

Sustained Current Ratings

Kg/Km m

Approximate Cable Weight

mm

mm

Insulation Thickness (Nominal)

mm

Kg/Km

Weight of Conductor (Approx)

Approximate Overall Diameter

mm

Conductor Diameter (Max)

Outersheath Thickness (Nominal)

mm2

Cable Data

Nominal Area of Conductor

Table 47

Powerplus

250˚C.

11.28

287

222

245

1.1

0.19

0.34

0.117

0.325

0.253

1149

500

6390

76.6

3.4

8

955

13

120

150

14.1

321

250

274

1.1

0.2

0.29

0.114

0.265

0.206

1202

500

6990

80.1

3.5

8

1177

14.5

185

240

22.56

440

325

358

1.4

0.24

0.19

0.106

0.162

0.125

1337

250

8950

89.1

3.8

8

1942

18.4

300

28.2

498

363

401

1.5

0.26

0.16

0.102

0.13

0.1

1412

200

10190

94.1

3.9

8

2439

20.6

400

37.6

574

410

453

1.6

0.29

0.14

0.098

0.102

0.0778

1520

200

10070

101.3

4.2

8

3122

23.7

1.HCC+ ™ Aluminium Conductor 2.Semiconductive conductor screen 3.DFI™ XLPE Insulation 4.Semiconductive insulation screen 5.Copper tape screen 6. Fillers 7. Tape binder 8. Outer sheath

17.39

373

283

311

1.2

0.22

0.24

0.11

0.211

0.164

1257

500

7730

83.8

3.6

8

1482

16.1

¢SÓ``````HQhÉ``H

BICC

55

mA/m

Approx. Charging Current per phase at Uo = 18kV and F = 50Hz

kA

One Second Short Circuit Current Rating of Conductor

Single Core Aluminium Conductors XLPE Insulated to IEC 60502-2 Aluminium Wire Armoured

18/30 (36)kV

4.70

184

151

151

0.79

0.14

0.84

0.16

0.822

0.641

576

500

1740

38.5

2.2

2

1.2

8

125

8.4

50

6.58

225

182

187

0.9

0.16

0.59

0.15

0.568

0.443

599

500

1850

40.0

2.2

2

1.2

8

180

9.9

70

8.93

271

218

218

1.0

0.18

0.43

0.14

0.411

0.32

627

500

2060

42.0

2.3

2

1.2

8

250

11.6

95

250˚C.

11.28

313

245

249

1.1

0.19

0.35

0.13

0.325

0.253

651

500

2260

43.5

2.3

2

1.2

8

313

13

120

Cable Data

LIMITING CONDUCTOR TEMPERATURE AFTER SHORT CIRCUIT IS

A

3. Laid in Air in trefoil touching, Ambient Temp. 35˚ C

FOR ALL CABLES THE MAXIMUM CONDUCTOR OPERATING TEMPERATURE IS 90˚C AND LONGER DRUM LENGTHS ARE AVAILABLE TO SPECIFIC CUSTOMER REQUIREMENTS.

A

g =1.2˚C m/W, depth of laying = 0.8m, laid singly

2. Drawn into Ducts, Ground Temp. 30˚C &

depth of laying = 0.8m, laid in trefoil touching

1. Laid Direct, Ground Temp. 30˚C & g =1.2˚C m/W, A

µf/Km

Approximate Capacitance of Cable

Sustained Current Ratings

ohm/Km ohm/Km

Approximate Impedance at 50 Hertz

ohm/Km

Approximate AC resistance of Conductor at 90˚C

Approximate Reactance at 50 Hertz

ohm/Km

Maximum DC resistance of Conductor at 20˚C

Kg/Km

Approximate Cable Weight m

mm

Approximate Overall Diameter

mm

mm

Outersheath Thickness (Nominal)

Minimum Bending Radius of Cable (during installation)

mm

Armour Wire Diameter (Nominal)

Standard Drum Length

mm mm

Kg/Km

Weight of Conductor (Approx)

Separation Sheath Thickness

mm

Conductor Diameter (Max)

Insulation Thickness (Nominal)

mm2

Nominal Area of Conductor

Table 48

Powerplus

14.10

354

267

276

1.1

0.2

0.3

0.13

0.265

0.206

692

500

2590

46.5

2.4

2.5

1.3

8

386

14.5

150

17.39

405

298

312

1.2

0.22

0.25

0.13

0.211

0.164

719

500

2760

48.0

2.5

2.5

1.3

8

486

16.1

185

22.56

469

338

360

1.4

0.24

0.2

0.12

0.162

0.125

756

500

3100

50.5

2.6

2.5

1.3

8

637

18.4

240

28.20

534

369

401

1.5

0.26

0.17

0.12

0.130

0.100

792

500

3420

53.0

2.6

2.5

1.4

8

800

20.6

300

47.00

708

454

507

1.8

0.32

0.14

0.11

0.080

0.0605

893

500

4690

59.5

2.85

2.5

1.5

8

1318

26.6

500

59.22

810

498

570

2.0

0.35

0.12

0.11

0.064

0.0469

945

300

5240

63.5

2.9

2.5

1.6

8

1672

29.8

630

75.20

902

534

623

2.3

0.4

0.11

0.10

0.051

0.0367

1008

250

6240

67.5

3.1

2.5

1.6

8

2231

33.6

800

94.00

994

570

676

2.5

0.44

0.10

0.10

0.043

0.0291

1076

200

7340

72.0

3.2

2.5

1.7

8

2745

37.6

1000

1.HCC+ ™ Aluminium Conductor 2.Semiconductive conductor screen 3.DFI™ XLPE Insulation 4.Semiconductive insulation screen 5.Copper tape screen 6. Bedding 7. Aluminium armour 8. Outer sheath

37.60

616

409

454

1.6

0.29

0.15

0.11

0.102

0.0778

845

500

4000

56.5

2.7

2.5

1.4

8

1024

23.7

400

¢SÓ``````HQhÉ``H

56

BICC ohm/Km ohm/Km µf/Km mA/m

Approximate AC resistance of Conductor at 90˚C

Approximate Reactance at 50 Hertz

Approximate Impedance at 50 Hertz

Approximate Capacitance of Cable

Approx. Charging Current per phase at Uo = 18kV and F = 50Hz

kA

One Second Short Circuit Current Rating of Conductor

50

4.70

161

125

142

0.79

0.14

0.83

0.14

0.822

0.641

918

300

8640

76.5

3.4

3.15

1.8

8

381

8.4

70

6.58

198

151

174

0.90

0.16

0.58

0.13

0.568

0.443

960

300

9010

80.0

3.5

3.15

1.8

8

549

9.9

95

8.93

239

182

205

1.0

0.18

0.43

0.12

0.41

0.32

1009

300

9910

84.5

3.6

3.15

1.9

8

762

11.6

LIMITING CONDUCTOR TEMPERATURE AFTER SHORT CIRCUIT IS

A

3. Laid singly in Air, Ambient Temp. 35˚ C

FOR ALL CABLES THE MAXIMUM CONDUCTOR OPERATING TEMPERATURE IS 90˚C AND LONGER DRUM LENGTHS ARE AVAILABLE TO SPECIFIC CUSTOMER REQUIREMENTS.

A

g =1.2˚C m/W, depth of laying = 0.8m, laid singly

2. Drawn into ducts, Ground Temp. = 30˚C &

depth of laying = 0.8m, laid singly

1. Laid Direct, Ground Temp. 30˚C & g =1.2˚C m/W, A

ohm/Km

Maximum DC resistance of Conductor at 20˚C

Sustained Current Ratings

mm ohm/Km

Minimum Bending Radius of Cable (during installation)

Kg/Km m

Standard Drum Length

Approximate Overall Diameter

Approximate Cable Weight

mm mm

Outersheath Thickness (Nominal)

mm

mm

Insulation Thickness (Nominal)

mm

Kg/Km

Weight of Conductor (Approx)

Armour Wire Diameter (Nominal)

mm

Conductor Diameter (Max)

Separation Sheath Thickness

mm2

Cable Data

Nominal Area of Conductor

Three Core Aluminium Conductors XLPE Insulated to IEC 60502-2 Steel Wire Armoured

18/30 (36)kV

Table 49

Powerplus

250˚C.

11.28

276

209

231

1.1

0.19

0.34

0.12

0.324

0.253

1050

250

10640

87.5

3.7

3.15

2

8

955

13

120

150

14.10

308

236

258

1.1

0.2

0.29

0.11

0.265

0.206

1093

250

11330

91.5

3.9

3.15

2

8

1177

14.5

185

17.39

359

267

294

1.2

0.22

0.24

0.11

0.211

0.164

1139

200

240

22.56

423

307

338

1.4

0.24

0.19

0.10

0.161

0.125

1205

200

13720

100.5

4.1

3.15

2.2

8

1942

18.4

300

28.20

478

343

378

1.5

0.26

0.16

0.10

0.129

0.100

1267

200

15760

106.0

4.3

3.15

2.3

8

2439

20.6

400

37.60

552

387

427

1.6

0.29

0.14

0.10

0.102

0.0778

1357

200

18430

113.5

4.5

3.15

2.4

8

3122

23.7

1.HCC+ ™ Aluminium Conductor 2.Semiconductive conductor screen 3.DFI™ XLPE Insulation 4.Semiconductive insulation screen 5.Copper tape screen 6. Fillers 7. Tape binder 8. Bedding 9. Galvanised steel wire armour 10. Outer sheath

12620

95.0

4

3.15

2.1

8

1482

16.1

¢SÓ``````HQhÉ``H

BICC

57

mm mm

Separation Sheath Thickness

Steel Tape Thickness (Nominal)

ohm/Km ohm/Km µf/Km mA/m

Approximate Reactance at 50 Hertz

Approximate Impedance at 50 Hertz

Approximate Capacitance of Cable

Approx. Charging Current per phase at Uo = 18kV and F = 50Hz

kA

One Second Short Circuit Current Rating of Conductor

Three Core Aluminium Conductors XLPE Insulated to IEC 60502-2 Steel Tape Armoured

50

4.70

161

125

142

0.79

0.14

0.83

0.14

0.822

0.641

878

500

5680

735.5

3.3

0.8

1.8

8

381

8.4

70

6.58

198

151

174

0.90

0.16

0.58

0.13

0.568

0.443

922

400

6380

77.0

3.4

0.8

1.8

8

549

9.9

95

8.93

239

182

205

1.0

0.18

0.43

0.12

0.41

0.32

971

300

7120

81.0

3.5

0.8

1.9

8

762

11.6

3.6

0.8

2

8

955

13

120

250˚C.

11.28

276

209

231

1.1

0.19

0.34

0.12

0.324

0.253

1010

300

8650

84.5

LIMITING CONDUCTOR TEMPERATURE AFTER SHORT CIRCUIT IS

A

3. Laid singly in Air, Ambient Temp. 35˚ C

FOR ALL CABLES THE MAXIMUM CONDUCTOR OPERATING TEMPERATURE IS 90˚C AND LONGER DRUM LENGTHS ARE AVAILABLE TO SPECIFIC CUSTOMER REQUIREMENTS.

A

g =1.2˚C m/W, depth of laying = 0.8m, laid singly

2. Drawn into Ducts, Ground Temp. = 30˚C &

depth of laying = 0.8m, laid singly

1. Laid Direct, Ground Temp. 30˚C & g =1.2˚C m/W, A

ohm/Km

Approximate AC resistance of Conductor at 90˚C

Sustained Current Ratings

mm ohm/Km

Maximum DC resistance of Conductor at 20˚C

Standard Drum Length

Minimum Bending Radius of Cable (during installation)

Kg/Km m

Approximate Cable Weight

mm

mm

Insulation Thickness (Nominal)

mm

Kg/Km

Weight of Conductor (Approx)

Approximate Overall Diameter

mm

Conductor Diameter (Max)

Outersheath Thickness (Nominal)

mm2

Cable Data

Nominal Area of Conductor

io 18/30 (36)kV

Table 50

Powerplus

150

14.10

308

236

258

1.1

020

0.29

0.11

0.265

0.206

1054

300

9370

88.0

3.7

0.8

2

8

1177

14.5

185

17.39

359

267

294

1.2

0.22

0.24

0.11

0.211

0.164

1099

250

10240

92.0

3.8

0.8

2.1

8

1482

16.1

300

28.20

478

343

378

1.5

0.26

0.16

0.10

0.129

0.100

1229

200

12970

102.5

4.1

0.8

2.3

8

2439

20.6

400

37.60

552

387

427

1.6

0.29

0.14

0.10

0.102

0.0778

1313

200

15780

109.5

4.4

0.8

2.4

8

3122

23.7

1.HCC+ ™ Aluminium Conductor 2.Semiconductive conductor screen 3.DFI™ XLPE Insulation 4.Semiconductive insulation screen 5.Copper tape screen 6. Fillers 7. Tape binder 8. Bedding 9. Galvanised steel tape armour 10. Outer sheath

22.56

423

307

338

1.4

0.24

0.19

0.10

0.161

0.125

1166

200

11590

97.5

4

0.8

2.2

8

1942

18.4

240

¢SÓ``````HQhÉ``H

Powerplus

Technical Data Current Ratings and Rating Factors The current ratings of copper and aluminium conductor cables stated in the tables in this catalogue are based on the IEC 287 Publication, assuming continuous conductor operating temperature of 90˚C, for cables laid underground or in air, or drawn through ducts. These ratings are applicable for conditions defined in the tables and derating factors need to be applied in case of variations in: • Ambient temperature • Ground temperature • Depth of buried cable • Thermal resistivity of soil • Multiple circuits and their configuration Appropriate tables for derating factors are provided in the latter part of this catalogue. Short Circuit Ratings The short circuit rating graphs given in this catalogue assume final conductor temperature of 250˚C rising from 90˚C i.e., in a fully loaded condition. It is therefore necessary that accessories used with the cables are also capable of operation at these values of fault current and temperature. The tables also indicate the specific short circuit fault current rating for a duration of one second for each cable size and type. When the fault duration (t) is different, then the appropriate rating may be obtained by multiplying the 1 second rating by the factor 1/√t. Short circuit forces should be taken into when single core cables are installed touching each other. Cleating and strapping should be such that repulsive forces that occur under short circuit conditions are contained.

Installation Cables described in this publication are suitable for laying direct in ground, in air or drawn through ducts. Special construction features are needed when sustained wet conditions prevail in the ground. Cable pulling forces have to be limited according to the total conductor cross section area (A) in mm2 and the maximum may be limited to A x 50 Newtons for copper and A x 30 Newtons for aluminium. Cable bending radii are recommended as follows: Minimum Bending Radius During installation

Controlled bending

Single core unarmoured

20D

15D

Single core armoured

15D

12D

Three core unarmoured

15D

12D

Three core armoured

12D

10D

D is overall cable diameter.

Voltage Tests After Installation The following test levels are recommended for cables immediately after installation. Cable Voltage Designation

15 min. D.C. Voltage Test

kV

kV

3.6/6

15

6/10

25

8.7/15

37

12/20

50

18/30

76

Repeated voltage tests of an installation, particularly with cables in service for more than 5 years can be detrimental and hence not recommended. If unavoidable, 50% of above voltages may be applied for tests.

58

BICC

¢SÓ``````HQhÉ``H

Rating Factors Cables laid direct in ground

Table 51 VARIATION

IN

GROUND TEMPERATURE

Ground temperature˚ C

15

20

30

35

40

45

0.96

0.91

0.87

Rating factor

Cable Type All Cables

1.11

Table 52 RATING

1.08

RATING

Table 53

1.00

3.6/6kV to 18/30kV cables

m

Up to 300mm2

Above 300mm2

0.50 0.60 0.80 1.00 1.25 1.50 1.75 2.00 2.50 3.00 or more

1.00 0.98 0.96 0.95 0.94 0.92 0.91 0.90

1.00 0.97 0.95 0.94 0.92 0.90 0.89 0.88

FACTORS FOR VARIATION IN THERMAL RESISTIVITY OF SOIL

Size of cables 2

1.04

FACTORS FOR DEPTH OF LAYING (TO CENTRE OF CABLE OR TREFOIL GROUP OF CABLES)

Depth of laying

mm

25

(AVERAGE

VALUES)

Soil thermal resistivity in K.m./W 0.8

0.9

1.0

1.5

2.0

2.5

3.0

50 70 95 120 150 185 240 300 400 500 630 800 1000

1.15 1.16 1.16 1.16 1.17 1.17 1.17 1.18 1.18 1.18 1.18 1.18 1.18

1.11 1.12 1.12 1.12 1.12 1.12 1.12 1.12 1.12 1.12 1.12 1.12 1.12

1.07 1.07 1.07 1.07 1.07 1.07 1.07 1.07 1.07 1.07 1.07 1.07 1.07

0.91 0.91 0.91 0.91 0.91 0.91 0.91 0.91 0.91 0.91 0.91 0.91 0.91

0.81 0.81 0.81 0.81 0.81 0.81 0.80 0.80 0.80 0.80 0.80 0.80 0.80

0.73 0.73 0.73 0.73 0.73 0.73 0.73 0.73 0.73 0.73 0.73 0.72 0.72

0.68 0.68 0.68 0.68 0.68 0.68 0.68 0.68 0.67 0.67 0.67 0.66 0.66

50 70 95 120 150 185 240 300 400

1.13 1.14 1.14 1.14 1.14 1.14 1.15 1.15 1.15

1.09 1.09 1.09 1.10 1.10 1.10 1.10 1.10 1.10

1.06 1.06 1.06 1.06 1.06 1.06 1.07 1.07 1.07

0.92 0.92 0.92 0.92 0.92 0.92 0.92 0.92 0.92

0.83 0.83 0.83 0.82 0.82 0.82 0.81 0.81 0.81

0.76 0.75 0.75 0.75 0.75 0.74 0.74 0.74 0.74

0.71 0.70 0.70 0.69 0.69 0.69 0.69 0.69 0.69

Single core

Multicore

BICC

59

Powerplus

Group Rating Factors GROUP

Table 54

RATING FACTORS FOR CIRCUITS OF THREE SINGLE CORE CABLES IN TREFOIL AND LAID

FLAT TOUCHING, HORIZONTAL FORMATION (AVERAGE VALUES)

SPACING

SPACING

Spacing of Circuits Number of Circuits

Touching + Trefoil

Laid flat

0.15 m*

0.30 m

0.45 m

0.60 m

3.6/6 to 12/20kV cables

2 3 4 5 6

0.78 0.66 0.59 0.55 0.52

0.81 0.68 0.62 0.58 0.55

0.81 0.71 0.65 0.61 0.58

0.85 0.76 0.72 0.68 0.66

0.88 0.80 0.76 0.73 0.72

0.90 0.83 0.80 0.77 0.76

18/30kV cables

2 3 4 5 6

0.79 0.67 0.62 0.57 0.54

0.81 0.70 0.65 0.60 0.57

0.81 0.71 0.65 0.60 0.57

0.85 0.76 0.72 0.68 0.66

0.88 0.80 0.76 0.73 0.72

0.90 0.83 0.80 0.77 0.76

* This configuration, at 0.15m spacing, may not be practical for the larger size cables.

Table 55

GROUP

RATING FACTORS FOR MULTICORE CABLES IN HORIZONTAL FORMATION

SPACING

60

BICC

Number of Cables in Group

Touching

0.15 m

0.30 m

0.45 m

0.60 m

3.6/6 to 12/20kV cables

2 3 4 5 6

0.80 0.68 0.62 0.57 0.55

0.85 0.75 0.70 0.66 0.63

0.89 0.80 0.77 0.73 0.71

0.90 0.84 0.80 0.78 0.76

0.92 0.86 0.84 0.81 0.80

18/30kV cables

2 3 4 5 6

0.80 0.70 0.64 0.59 0.56

0.83 0.73 0.68 0.63 0.60

0.87 0.78 0.74 0.70 0.68

0.89 0.82 0.78 0.75 0.74

0.91 0.85 0.82 0.79 0.78

Spacing

¢SÓ``````HQhÉ``H

Cables installed in single way ducts: The term ‘ducts’ applies to single earthenware, fibre or plastic pipes.

Table 56

VARIATION

IN

GROUND TEMPERATURE

Ground temperature˚ C

15

25

20

Cable Type All Cables

1.11

RATING

Table 57

1.08

35

40

45

1.04

1.00

0.96

0.91

0.87

FACTORS FOR DEPTH OF LAYING (TO CENTRE OF CABLE OR

TREFOIL GROUP OF CABLES)

3.6/6kV to 18/30kV cables

Depth of laying

Table 58

30

Rating factor

RATING

m

Up to 300mm2

Above 300mm2

0.50 0.60 0.80 1.00 1.25 1.50 1.75 2.00 2.50 3.00 or more

1.00 0.98 0.95 0.93 0.92 0.90 0.89 0.88

1.00 0.99 0.97 0.96 0.95 0.94 0.93 0.92

FACTORS FOR VARIATION IN THERMAL RESISTIVITY OF SOIL (AVERAGE VALUES)

Size of cables mm

2

Soil thermal resistivity in K.m./W 0.8

0.9

1.0

1.5

2.0

2.5

3.0

50 70 95 120 150 185 240 300 400 500 630 800 1000

1.08 1.09 1.09 1.10 1.10 1.10 1.11 1.11 1.11 1.11 1.12 1.12 1.13

1.06 1.06 1.06 1.07 1.07 1.07 1.07 1.08 1.08 1.08 1.08 1.09 1.09

1.04 1.04 1.04 1.04 1.04 1.04 1.04 1.05 1.05 1.05 1.05 1.05 1.05

0.94 0.94 0.94 0.94 0.94 0.93 0.93 0.93 0.93 0.93 0.93 0.93 0.92

0.87 0.87 0.87 0.86 0.86 0.86 0.86 0.85 0.85 0.85 0.84 0.84 0.84

0.82 0.81 0.81 0.80 0.80 0.79 0.79 0.79 0.78 0.78 0.78 0.77 0.77

0.77 0.76 0.76 0.75 0.75 0.75 0.74 0.74 0.73 0.73 0.72 0.72 0.71

50 70 95 120 150 185 240 300 400

1.05 1.05 1.06 1.06 1.06 1.07 1.07 1.07 1.07

1.03 1.04 1.04 1.04 1.04 1.05 1.05 1.05 1.05

1.02 1.02 1.02 1.03 1.03 1.03 1.03 1.03 1.03

0.96 0.96 0.96 0.95 0.95 0.95 0.95 0.95 0.95

0.91 0.91 0.91 0.90 0.90 0.89 0.89 0.88 0.88

0.87 0.86 0.86 0.85 0.85 0.84 0.84 0.83 0.83

0.83 0.82 0.82 0.81 0.80 0.80 0.79 0.78 0.78

Single core

Multicore

BICC

61

Powerplus

Group Rating Factors GROUP Table 59

RATING FACTORS FOR SINGLE CORE CABLES IN TREFOIL

SINGLE WAY DUCTS, HORIZONTAL FORMATION (AVERAGE VALUES)

SPACING

Spacing

Number of Circuits

3.6/6 to 12/20 kV Cables

18/30kV Cables

Table 60

GROUP

Touching

0.45 m

0.60 m

2 3 4 5 6

0.85 0.75 0.70 0.67 0.64

0.88 0.80 0.76 0.73 0.71

0.90 0.83 0.80 0.77 0.76

2 3 4 5 6

0.85 0.76 0.71 0.67 0.65

0.88 0.80 0.76 0.73 0.71

0.90 0.83 0.80 0.77 0.76

RATING FACTORS FOR MULTICORE CABLES IN SINGLE WAY DUCTS,

HORIZONTAL FORMATION (AVERAGE VALUES)

SPACING

Number of Ducts in Ground

62

3.6/6 to 12/20kV cables

2 3 4 5 6

18/30kV cables

2 3 4 5 6

BICC

Spacing Touching

0.30 m

0.45 m

0.60 m

0.88 0.80 0.75 0.71 0.69

0.91 0.84 0.81 0.77 0.75

0.93 0.87 0.84 0.82 0.80

0.94 0.89 0.87 0.85 0.84

0.87 0.78 0.73 0.69 0.67

0.89 0.82 0.78 0.75 0.73

0.92 0.85 0.82 0.79 0.78

0.93 0.87 0.85 0.83 0.82

¢SÓ``````HQhÉ``H

Group Rating Factors Cables installed in free air: All the ratings for cables run in air are based upon the assumption that they are shielded from direct sunlight and without restriction of ventilation.

Table 61

VARIATION

Ambient temperature˚ C

IN

AIR TEMPERATURE 25

30

35

45

50

55

0.90

0.85

0.80

Rating factor

Cable Type All Types

40

1.09

1.04

1.00

0.95

Effect of grouping cables: No reduction in rating is necessary where there is free circulation of air around the circuits provided that: 1. The horizontal clearance between circuits is not less than twice the overall diameter of an individual cable. 2. The vertical clearance between circuits is not less than four times the diameter of an individual cable. 3. If the number of circuits exceeds three, they are installed in a horizontal plane.

Copper Screen for single core unarmoured cables: It is common practice to provide copper screen of minimum cross-sectional area (as indicated below) for single core unarmoured cables, unless specific earth fault requirements of the system govern the same. In the latter case, it is advisable to design the copper screen to carry the specified earth fault current.

Table 62

BICC

Conductor cross section mm2

Screen Area

50 - 120

16

150 - 300

25

400 and above

35

mm2

63

Powerplus

Short Circuit Rating Copper Conductor 100 90 80

1000

SQ MM

70

800

60

SQ MM

630 500

SQ MM

400

SQ MM

300

SQ MM

240

SQ MM

KILOAMPS

SQ MM

185

SQ MM

IN

50

150

SQ MM

120

SQ MM

40 30

CURRENT

20

10 9 8

95SQ

MM

7 6

70

SQ MM

50

SQ MM

35

SQ MM

25

SQ MM

16

SQ MM

5 4 3

2

1

0.1

0.2

0.3

0.4

0.5 0.6 DURATION

0.8 1.0 OF

SHORT CIRCUIT

2.0 IN

3.0

SECONDS

Basis 1. Cable fully loaded at start of short circuit. (Conductor temperature: 90˚C) 2. Conductor temperature at end of short circuit: 250˚C Note: It should be ensured that the accessories associated with the cable are also capable of operation at these values of fault current and temperature.

64

BICC

¢SÓ``````HQhÉ``H

Short Circuit Rating Aluminium Conductor 100 90 80 70 60

1000

SQ MM

50

800

SQ MM

630

SQ MM

500

SQ MM

400

SQ MM

300

SQ MM

240

SQ MM

10

185

SQ MM

9

150

SQ MM

40 30

CURRENT

IN

KILOAMPS

20

8 7

120

SQ MM

95

SQ MM

70

SQ MM

50

SQ MM

35

SQ MM

25

SQ MM

16

SQ MM

6 5 4 3

2

1

0.1

0.2

0.3

0.4

Basis

0.5 0.6 DURATION

0.8 1.0 OF

SHORT CIRCUIT

2.0 IN

3.0

SECONDS

1. Cable fully loaded at start of short circuit. (Conductor temperature: 90˚C) 2. Conductor temperature at end of short circuit: 250˚C Note: It should be ensured that the accessories associated with the cable are also capable of operation at these values of fault current and temperature.

BICC

65

Powerplus

Cable Drum Handling Ducab Medium Voltage cables should be installed by trained personnel in accordance with good engineering practices, recognised codes of practice, statutory local requirements, IEE wiring regulations and where relevant, in accordance with any specific instructions issued by the company. Cables are often supplied in heavy cable drums and handling these drums can constitute a safety hazard. In particular, dangers may arise during the removal of steel binding straps and during the removal of retaining battens and timbers which may expose projecting nails. For detailed information, refer to Ducab's Drum Handling Instructions Catalogue.

á©aGôdG ᣰSGƒH äÓHɵdG äGôµH ™aQ LIFTING CABLE DRUMS BY CRANE

º¡°ùdG √ÉŒÉH IôµÑdG êôMO ROLL

DRUM SHOWN DIRECTION OF THE ARROW

THE

á©°SGh Iõ«cQ

É¡ÑfGƒL ≈∏Y äGôµÑdG ™°†J ’ DO NOT LAY DRUMS THEIR FLANGES

66

BICC

ON

IN THE

á≤«°V Iõ«cQ

WIDE STOP

Small Stop

áÑ°SÉæŸG õFÉcôdG ΩGóîà°SG Öéj êôMóàdG øe äGôµÑdG ™æŸ USE PROPER STOPS TO PREVENT DRUMS ROLLING

¢SÓ``````HQhÉ``H

»cƒ°ûdG ™aôdG áÑcôe ô¡X ≈∏Y äGôµÑdG ™aôd ᪫∏°ùdG á≤jô£dG LIFT DRUMS ON FORK TRUCKS CORRECTLY

É¡∏≤f πÑb áë«ë°üdG á≤jô£dÉH äGôµÑdG â«ÑãJ Öéj SECURE DRUMS ADEQUATELY BEFORE TRANSPORTATION

BICC

67

§°Sƒàª`dG ó¡é`dG äGP ábÉ£dG äÓHÉc ¢SÓHQhÉH

Powerplus MEDIUM VOLTAGE CABLES

24

9171 502 7790 [email protected]

808 2599

Ref No: PP3/0107

808 2500

24

502 7890

Toll Free : 800-Ducab