Nec Aspire Multi-button Guide 19x4w

0893400cvr8.QXD (with binding)

1/25/06

2:57 PM

Page 1

NEC Unified Solutions, Inc. 4 Forest Parkway, Shelton, CT 06484 TEL: 203-926-5400 FAX: 203-929-0535 www.necunifiedsolutions.com

Multibutton Telephone Feature Handbook

(0893400)

January 25, 2006 Printed in U.S.A.

0893400_08.qxd

1/25/06

2:48 PM

Page 2

Your Multibutton Telephone Alphanumeric Display Message Waiting Lamp 0893200 - 1

Soft Keys (Not available on all models) CHECK

1

CLEAR

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

MSG

1

2

3

4

5

6

FLASH

CONF

7

8

DIAL

CALL 1

LND

CALL 2

MIC

DND

SPK

HOLD

9

0

One Touch Keys

Programmable Function Keys Abbreviated Dialing Dual Line Appearance Keys Last Number Redial Do Not Disturb

VOL

Microphone Cutoff Speakerphone Handsfree, Handset, Page, BGM and Ringing Volume Control, LCD Display Adjustment

Microphone

Nothing contained in this manual shall be deemed to be, and this manual does not constitute, a warranty of, or representation with respect to, any of the equipment covered. This manual is subject to change without notice and NEC Unified Solutions, Inc. has no obligation to provide any updates or corrections to this manual. Further, NEC Unified Solutions, Inc. also reserves the right, without prior notice, to make changes in equipment design or components as it deems appropriate. No representation is made that this manual is complete or accurate in all respects and NEC Unified Solutions, Inc. shall not be liable for any errors or omissions. In no event shall NEC Unified Solutions, Inc. be liable for any incidental or consequential damages in connection with the use of this manual. This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document may be photocopied or reproduced without prior written consent of NEC Unified Solutions, Inc. This equipment complies with Part 68 of the FCC rules and the requirements adopted by ACTA. On the system cabinet is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. If requested, this number must be provided to the telephone company.

©2006 by NEC Unified Solutions, Inc. All Rights Reserved.

Printed in U.S.A.

0893400_09.qxd

8/3/06

10:43 AM

Page i

Table of Contents Using Your Telephone .....................................................1 Handsfree Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Using All Those Features! ...............................................2 Calling a Co-Worker . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Outside Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Handling And Rerouting Your Calls . . . . . . . . . . . . . . . .3 When Your Call Can't Go Through . . . . . . . . . . . . . . . . .3 Placing Calls Quickly . . . . . . . . . . . . . . . . . . . . . . . . . . .4 When You Work In Groups . . . . . . . . . . . . . . . . . . . . . . .5 If You Need Privacy . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Have a Telephone Meeting . . . . . . . . . . . . . . . . . . . . . . .6 Streamlining Your Telephone's Operation . . . . . . . . . . . .6 Personalizing Your Telephone . . . . . . . . . . . . . . . . . . . . .7 Your Phone Does the Talking . . . . . . . . . . . . . . . . . . . . .8 And, Your Super Display Does The Thinking . . . . . . . .9 Features ........................................................................11 Abbreviated Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 Automated Attendant (VRS) . . . . . . . . . . . . . . . . . . . . .16 Background Music . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 Barge In . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 Call Forwarding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 Call Forwarding Off-Premise . . . . . . . . . . . . . . . . . . . .22 Call Forward Follow Me . . . . . . . . . . . . . . . . . . . . . . . .23 Call Forward/DND Override . . . . . . . . . . . . . . . . . . . . .24 Call Redirect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 Call Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 Call Waiting/Camp On . . . . . . . . . . . . . . . . . . . . . . . . .27 Callback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 Caller ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29 Center Telephone Book . . . . . . . . . . . . . . . . . . . . . . . . .34 Conference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47 Conference, Voice Call . . . . . . . . . . . . . . . . . . . . . . . . .48 Conversation Record . . . . . . . . . . . . . . . . . . . . . . . . . . .49 Department Calling . . . . . . . . . . . . . . . . . . . . . . . . . . . .50 Department Step Calling . . . . . . . . . . . . . . . . . . . . . . . .52 i

0893400_09.qxd

8/3/06

10:43 AM

Page ii

Table of Contents Dial Number Preview . . . . . . . . . . . . . . . . . . . . . . . . . .53 Dial Pad Confirmation Tone . . . . . . . . . . . . . . . . . . . . .54 Directed Call Pickup . . . . . . . . . . . . . . . . . . . . . . . . . . .55 Directory Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56 Display Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . .58 Do Not Disturb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59 Door Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60 DSS Console . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61 Flash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65 Forced Trunk Disconnect . . . . . . . . . . . . . . . . . . . . . . .66 General Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67 Group Call Pickup . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68 Group Listen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69 Handsfree and Monitor . . . . . . . . . . . . . . . . . . . . . . . . .70 Headset Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71 Hold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72 System Hold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72 Exclusive Hold . . . . . . . . . . . . . . . . . . . . . . . . . . . .73 Group Hold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73 Intercom Hold . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73 Hotline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74 Intercom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75 Intercom Abandoned Call Display . . . . . . . . . . . . .76 Last Number Redial . . . . . . . . . . . . . . . . . . . . . . . . . . . .77 Line Preference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79 Meet Me Conference . . . . . . . . . . . . . . . . . . . . . . . . . . .80 Meet Me External Conference . . . . . . . . . . . . . . . .80 Meet Me Internal Conference . . . . . . . . . . . . . . . .81 Meet Me Paging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82 Meet Me External Paging . . . . . . . . . . . . . . . . . . . .82 Meet Me Internal Paging . . . . . . . . . . . . . . . . . . . .83 Memo Dial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84 Message Waiting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85 Microphone Cutoff . . . . . . . . . . . . . . . . . . . . . . . . . . . .87 Multiple Directory Numbers/Call Coverage . . . . . . . . .88 Multiple Directory Numbers . . . . . . . . . . . . . . . . .88 Call Coverage . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88 Music on Hold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .90 Name Storing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91 Night Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .92 ii

0893400_09.qxd

8/3/06

10:43 AM

Page iii

Table of Contents Off Hook Signaling . . . . . . . . . . . . . . . . . . . . . . . . . . . .94 One-Touch Calling . . . . . . . . . . . . . . . . . . . . . . . . . . . .96 Using Personal Speed Dial without One-Touch Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99 Outside Calls, Answering . . . . . . . . . . . . . . . . . . . . . .100 Outside Calls, Placing . . . . . . . . . . . . . . . . . . . . . . . . .102 Converting from Pulse to Tone Dialing . . . . . . . .103 Are You Behind a PBX? . . . . . . . . . . . . . . . . . . .103 You May Have a Private Line . . . . . . . . . . . . . . .104 If You Hear a Warning Tone . . . . . . . . . . . . . . . . .104 How Prime Line Works . . . . . . . . . . . . . . . . . . . .104 Did Your Call Go Through? . . . . . . . . . . . . . . . . .105 Paging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106 Internal Paging . . . . . . . . . . . . . . . . . . . . . . . . . . .106 External Paging . . . . . . . . . . . . . . . . . . . . . . . . . .106 Combined Paging . . . . . . . . . . . . . . . . . . . . . . . . .107 Park . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108 Park and Page (VRS) . . . . . . . . . . . . . . . . . . . . . . . . . .110 Personal Greeting . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112 Programmable Function Keys . . . . . . . . . . . . . . . . . . .114 Repeat Redial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119 Reverse Voice Over . . . . . . . . . . . . . . . . . . . . . . . . . . .120 When You're On a Call . . . . . . . . . . . . . . . . . . . . .120 When Your Phone is Idle . . . . . . . . . . . . . . . . . . .120 Ringdown . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .121 Room Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .122 Save Number Dialed . . . . . . . . . . . . . . . . . . . . . . . . . .123 Secretary Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .125 Secretary Call Buzzer . . . . . . . . . . . . . . . . . . . . . .125 Secretary Call Pickup . . . . . . . . . . . . . . . . . . . . . .126 Secure Set Relocation . . . . . . . . . . . . . . . . . . . . . . . . .127 Selectable Display Messages . . . . . . . . . . . . . . . . . . . .128 Selectable Ring Tones . . . . . . . . . . . . . . . . . . . . . . . . .130 Serial Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .131 Tandem Ringing . . . . . . . . . . . . . . . . . . . . . . . . . . . . .132 Tandem Trunking . . . . . . . . . . . . . . . . . . . . . . . . . . . . .133 Method A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .133 Method B (Requires a [Transfer] key) . . .134 Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135

iii

0893400_09.qxd

8/3/06

10:43 AM

Page iv

Table of Contents Transfer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .136 Transferring Outside Calls . . . . . . . . . . . . . . . . . .137 Transferring Without Holding . . . . . . . . . . . . . . .137 Transferring Intercom Calls . . . . . . . . . . . . . . . . .138 Meet Me External Paging Transfer . . . . . . . . . . .139 Meet Me Internal Paging Transfer . . . . . . . . . . . .140 Trunk Queuing and Camp On . . . . . . . . . . . . . . . . . . .141 Voice Mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .142 Calling Your Mailbox . . . . . . . . . . . . . . . . . . . . . .143 Leaving a Message . . . . . . . . . . . . . . . . . . . . . . . .143 Forwarding Calls to Your Mailbox . . . . . . . . . . .143 Emulating a Personal Answering Machine . . . . .144 Transferring Calls to a Mailbox . . . . . . . . . . . . . .145 Recording Your Call . . . . . . . . . . . . . . . . . . . . . . .145 Voice Over . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .146 Voice Prompting Messages . . . . . . . . . . . . . . . . . . . . .147 Voice Response System (VRS) . . . . . . . . . . . . . . . . . .149 Volume Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . .150 Charts and Illustrations ...............................................151

iv

0893400_09.qxd

8/3/06

10:43 AM

Page 1

Using Your Telephone Your telephone's Alphanumeric Display helps you use features and tells you about your calls. For example, a ringing outside line may display a name before you answer it. (You may be able to change the time on your phone if it's not correct. Turn to page 135 for more.) Press a One-Touch Key for one-button with co-workers and outside callers, or when using certain features. To learn how to program your One-Touch Keys, go to page 96. Function Keys are normally line keys, but you can program them for other features. In this handbook, the feature assigned to a function key appears in parentheses next to the key. For example, (Hotline) means press the function key set for Hotline. See page 114 for more. Line Appearance Keys are Intercom keys for placing and answering calls. If you're busy on one - just use the other. Press for Handsfree calls, or use the handset instead. See Handsfree Options below. The Microphone picks up your voice for Handsfree calls, while Feature Keys speed up using common features.

Handsfree Options G

G G

Handsfree lets you place and answer calls by pressing instead of using the handset. Your telephone must have a Speakerphone if you want to use Handsfree. With Automatic Handsfree, press a line or Line Appearance key without lifting the handset. You normally have this feature. If you have Monitor, you can place a call without lifting the handset but you must lift the handset to speak. Telephones without Speakerphones have Monitor. Due to the flexibility built into the system, your dialing codes may differ from those in this guide. Review Your System's Dialing Plan on page 151 and check with your Communications Manager. Also, the system may restrict you from using some of the features in this handbook.

1

0893400_09.qxd

8/3/06

10:43 AM

Page 2

Using All Those Features! Calling a Co-Worker You can dial a co-worker on the Intercom (page 75), or use Paging (page 106) if you don't know where they are. When you must get through right away, interrupt a call using Barge In (page 18). Certain Intercom calls may ring your phone on function keys as Multiple Directory Numbers (page 88). Visitors at your entrance door can call you on the Intercom using a Door Box (page 60).

Outside Calls You can Answer Outside Calls that ring your phone or flash your line keys (page 100). Caller ID allows you to identify the caller before or after you pick up the handset (page 29). Night Service (page 92) may change the way these same calls ring your phone. Set your Line Preference (page 79) to answer ringing outside calls or Intercom calls first. To Place Outside Calls (page 102), use your line keys or dial codes. You may have to enter Codes (page 14) before your call goes through. Use Dial Number Preview (page 53) to check your digits before you dial. Once your call goes through, the Call Timer (page 26) shows you how long you're on the phone. You may be able to use Flash (page 65) to place another call without losing your line. 2

0893400_09.qxd

8/3/06

10:43 AM

Page 3

Using All Those Features! Handling And Rerouting Your Calls FOLLOW ME

CALL FWD

DND

HOLD

SEL. DISPL.

PARK

Use Hold (page 72) to have your call wait at your phone. Or, Park it in orbit for a co-worker (page 108). Have a call for a co-worker? Transfer it to them (page 136). Don't know where they are? Use Meet Me Paging Transfer (page 139) so they can pick it up wherever they are. If you want the call to come back when your co-worker is done, use Serial Call (page 131).

When you leave your desk, think about Call Forwarding your calls to someone else (page 20). If that meeting runs long, go to another phone and bring your calls to you with Call Forward Follow Me (page 23). When you want callers to know where you are, set a Selectable Display Message at your phone (page 128). You may be able to Override (page 24) another 's Call Forward if you think they are still at their phone.

When Your Call Can't Go Through Don't just hang up when your call can't get through to a co-worker! Use Call Waiting (page 27) to wait without hanging up. Send your coworker Off Hook Signaling (page 94) to let them know you're waiting. If you don't have time to wait, leave a Callback request (page 28). In a hurry? Think about leaving your co-worker a Message Waiting (page 85), or use optional Voice Mail (page 142) to record a voice message for them. 3

0893400_09.qxd

8/3/06

10:43 AM

Page 4

Using All Those Features! There's no need to keep redialing your outside call if it's busy or unanswered - use Repeat Redial instead (page 119). And when your system's lines are busy, Trunk Queuing (page 141) lets you wait for a free one. If you have an emergency, Forced Trunk Disconnect (page 66) allows you to get through on a busy line right away. With Voice Over (page 146), talk to a busy - while they keep talking to their initial caller. When you're busy on a call, you can do the same thing with Reverse Voice Over (page 120).

Placing Calls Quickly Store numbers that you call often in Abbreviated Dialing bins (page 11). You can easily dial the stored number with just a few key presses. To quickly retry the number you just dialed, try Last Number Redial (page 77). If you'll need to redial the number later on, let Save Number Dialed (page 123) retain it for you. Ever call Directory Assistance for a number and not have a pen to write it down? Use Memo Dial (page 84) to jot the number down in your phone's memory instead.

4

0893400_09.qxd

8/3/06

10:43 AM

Page 5

Using All Those Features! When You Work In Groups If you and your co-workers handle each other's calls, you might want to be in a Department Calling group (page 50). Someone calling your group's number goes through to anyone who's available. You can even have Department Step Calling (page 52) send your personal calls to your group when you're not available. To answer a call already ringing a co-worker's phone, use Group Call Pickup (page 68). When you're on a call and you want the others in your area to listen in on the conversation, activate Group Listen (page 69). Your co-workers hear the call through your telephone's speaker. If you frequently call the same co-worker, you can have Ringdown (page 121) automatically call them for you. All you have to do is lift your handset.

If You Need Privacy When you're busy in your office and don't want to be interrupted, use Do Not Disturb (page 59). Before talking to someone at your desk while you're on the phone, try Microphone Cutoff (page 87). Your caller cannot hear your voice until you cancel Microphone Cutoff.

5

0893400_09.qxd

8/3/06

10:43 AM

Page 6

Using All Those Features! Have a Telephone Meeting Conference (page 47) allows you to quickly set up a telephone meeting. When your phone allows Voice Call Conference (page 48), others can your outside call just by pressing the line key. Use Meet Me Conference (page 80) to set up a meeting which lets others if they choose. Optionally, you can use Meet Me Paging (page 82) to set up a meeting on a page zone. To two or more outside callers together and leave them to talk privately, use Tandem Trunking (page 133).

N2 IP -1 5

Streamlining Your Telephone's Operation Your telephone provides you with options that can dramatically streamline the way you handle calls. For example, you can program One-Touch Keys (page 96) for one-button access to co-workers, outside calls, Abbreviated Dialing bins and certain feature codes.

Want to automate Callback, Message Waiting or other features? Just assign these functions to available Programmable Function Keys (page 114). Need one-button Transfer and calling for a co-worker? Program a Hotline (page 74) 6

0893400_09.qxd

8/3/06

10:43 AM

Page 7

Using All Those Features! on another function key. (When you see in this handbook, the operation needs a Programmable Function Key.) Are you a secretary - or do you have a secretary that handles your calls? Set up Secretary Call buzzer keys (page 125). You can use Secretary Call Pickup (page 126) to quickly pick up calls intended for your secretary or boss. Tired of always reaching for the handset or cradling it under your chin while you type? Install a headset and enable Headset Operation (page 71).

Personalizing Your Telephone

When you need to cover up noise in your office that might be distracting to your work, turn on Background Music (page 17).

N2

IP-

14

If your phone is near other phones that ring the same way, choose unique Selectable Ring Tones (page 130) so you know which calls are for you.

Don't forget about that important meeting - set an Alarm (page 15) to remind you. Let the co-workers you call know who's on the line. Go to Name Storing (page 91) and assign a name to your extension. To have your phone beep every time you press a dial pad key, enable the Dial Pad Confirmation Tones (page 54).

7

0893400_09.qxd

8/3/06

10:43 AM

Page 8

Using All Those Features! Your Phone Does the Talking

N2

IP-13

The optional Voice Response System (page 149) gives your system digital recording and play back capability. This lets you handle callers with that important "Personal Touch". For example, if you don't have an operator, the Automated Attendant (page 16) can answer your calls and play a list of dialing options to your callers. Use Personal Greeting (page 112) to greet your callers with your own recorded voice, and then forward them to a co-worker. Or, you can have Park and Page (page 110) welcome your callers and automatically page you to pick up the call. You'll find other VRS features handy when using your phone or staying in touch with others in your company. If there is an announcement everyone in your company should hear, just listen to your General Message (page 67). Voice Prompting Messages (page 147) tell you about your system, your own phone and the status of your call. You'll hear voice prompts reminding you when your calls are forwarded or when you have a message. You can even find out your extension number, the date and the time of day.

8

0893400_09.qxd

8/3/06

10:43 AM

Page 9

Using All Those Features! And, Your Super Display Does The Thinking Do you want a feature but not know how to use it? Have you ever been busy on a call and not ed the options your phone provides? If you have an optional Super Display Telephone, the Soft Keys on your telephone do the thinking for you.

? P-1

N2I 2

R CLEA

6 5

When you use your Super Display, your One-Touch Keys automatically turn into Soft Keys. A Soft Key is a variable feature key - the function of the key changes to match what you are doing. This lets you spend more time thinking about your job and less time thinking about your telephone. 12

4

K CHEC

11

3

18

10

2

17

9

1

24

16

8

23

15

7

22

14

21

13

DIAL

20

19

H FLAS

CONF

3

2

1

MSG

7

2 CALL

LND

DND

6

5

4

1 CALL

MIC

9

8

HOLD

SPK

0

9

0893400_09.qxd

8/3/06

10:43 AM

Page 10

Using All Those Features! - For Your Notes -

10

0893400_09.qxd

8/3/06

10:43 AM

Page 11

Abbreviated Dialing Abbreviated Dialing gives you quick access to numbers you call frequently. This saves time, for example, when calling a client with whom you deal often. Instead of dialing a long telephone number, you just use Abbreviated Dialing. There are three types of Abbreviated Dialing: Common, Group and Personal. All co-workers can share the Common Abbreviated Dialing numbers. All co-workers in your Department Calling Group can share the Group Abbreviated Dialing numbers. (See page 50 for more on Department Calling.) Only you can use your Personal Abbreviated Dialing numbers. To set up Personal Abbreviated Dialing, turn to OneTouch Calling on page 96. + (for Common). To store an 1. Abbreviated Dialing OR number (recommended for (for Group). display phones only): 2. Dial Abbreviated Dialing bin number (000-999). Ask your Communications Manager for your bin numbers. This range can be increased to 1999 in programming. 3. Dial telephone number you want to store (up to 24 digits). Valid entries are 0-9, # and *. To enter a pause, press MIC. 4.

5.

+ Enter the name associated with the Abbreviated Dialing number. Refer to Name Storing on page 91 for instructions on entering names. +

to hang up.

11

0893400_09.qxd

8/3/06

10:43 AM

Page 12

Abbreviated Dialing + . To dial a Common 1. Abbreviated Dialing 2. Dial bin number. number: The stored number dials out. The system selects a line for you. OR 1.

+ or (Common Abbreviated Dialing). To preselect, press a line key instead of CALL1. 2. Dial Common Abbreviated Dialing bin number. The stored number dials out. Unless you preselect, the system selects a line for you. + . To dial a Group 1. Abbreviated Dialing 2. Dial bin number. The stored number dials out. The sysnumber: tem selects a line for you. OR 1.

+ (Group Abbreviated Dialing). To preselect, press a line key instead of CALL1. 2. Dial Group Abbreviated Dialing bin number. The stored number dials out. Unless you preselect, the system selects a line for you.

12

0893400_09.qxd

8/3/06

10:43 AM

Page 13

Abbreviated Dialing To check your stored 1. Abbreviated Dialing (Common only). numbers: 2. 3. Dial the Abbreviated Dialing code (e.g., 001). If the entire stored number is too long for your phone's display, press * to see the rest of it. To check more Abbreviated Dialing numbers, repeat from step 2. 4.

13

0893400_09.qxd

8/3/06

10:43 AM

Page 14

Codes Codes are codes you enter that help keep track of outside calls. There are two types of Codes: Optional and Forced. With optional codes, the Codes you enter are solely for categorizing your calls. For example, if you work in an ing firm that must bill back customers for time on the phone, Optional Codes are for you. Forced Codes also let you categorize calls, but you must enter one before placing outgoing calls. If you don't enter the code, you can't place the call. This ensures that calls don't go out untracked. When forced and verified Codes are enabled for toll calls only, local and toll free numbers have optional codes. Check with your Communications Manager to find out if your system uses Codes - and which codes you should enter. Codes can be from 1-16 digits long, using 0-9 and #. To enter an 1. Code any time while on an outside call:

+ Code (1-16 digits) + .

To enter an 1. Access trunk for outside call. You can access a trunk by pressing a Code while placing an line key or by dialing a code. Refer to outside call: page 102 for more on placing outside calls. 2.

+ Code (1-16 digits) +

. 3. Dial the number you want to call. If you hear "stutter" dial tone after dialing the number, your system requires an ARS Authorization Code. Ask your Communications Manager for your codes.

14

0893400_09.qxd

8/3/06

10:43 AM

Page 15

Alarm You can use your extension like an alarm clock to remind you of appointments and important meetings. Your phone has two types of alarms: G Alarm 1 - which sounds only once at the preset time. G Alarm 2 - which sounds every day at the preset time. To set the alarm: 1.

+ + Alarm type (1 or 2). 2. Dial the alarm time (24-hour clock). For example, for 1:15 PM dial 1315. 3.

to hang up.

To silence an alarm: 1. To check the pro- 1. grammed alarm time:

+ or 2 +

To cancel an alarm: 1.

+ Alarm type 1 .

+

+ Alarm type 1

or 2. 2.

+

to hang up.

15

0893400_09.qxd

8/3/06

10:43 AM

Page 16

Automated Attendant (VRS)

This feature requires the Voice Response System (VRS) provided by the DSP daughter board (DSPDB).

Automated Attendant automatically answers your system's outside calls, plays a prerecorded greeting and then lets callers directly dial you or your co-workers. This gives your system immediate answering and routing of calls without an operator or dispatcher. The Automated Attendant can: G Simultaneously answer up to six calls. G Route calls to an extension, Department Group or Voice Mail and provide additional options if the extension or group is unavailable. G Give you the option of recording or modifying the Automated Attendant greetings (see below). + To record, listen to or 1. erase an Automated Attendant greeting: 2. To record, dial OR To listen, dial OR

. . .

To erase, dial . 3. Dial the VRS message number (01-48) for the Automated Attendant greeting you want to record, listen to or erase. Your Communications Manager can tell you which message to enter. If recording, begin when you hear the announcement, "Please start recording." When done, press # to end recording. When listening to a message, press # to hear the message again. If erasing, you can cancel erasing by pressing HOLD before hanging up. 4. 16

to hang up.

0893400_09.qxd

8/3/06

10:43 AM

Page 17

Background Music Background Music (BGM) sends music from an FM receiver, tape deck or CD player your company provides to the speaker in your telephone. This helps give you a pleasant working environment. The Background Music plays whenever your phone is idle. To Turn BGM on or 1. off: 2.

+

.

to hang up.

17

0893400_09.qxd

8/3/06

10:43 AM

Page 18

Barge In Barge In permits you to break into a co-worker's established call. Use Barge In when you have to get a message through right away (such as in an emergency). Barge In sets up a three-way call between you, your co-worker and their caller. Your system provides two Barge In modes: Monitor Mode and Speech Mode. With Monitor Mode, you can listen in on another 's conversation but you cannot participate. With Speech Mode, you can listen and into the conversation. Check with your Communications Manager to see which type of Barge In you have. CAUTION Unauthorized intrusion on calls using the Barge In feature may be interpreted as an invasion of privacy.

To Barge In on a con- 1. Call busy extension. (Barge In). versation in progress: 2.

18

0893400_09.qxd

8/3/06

10:43 AM

Page 19

Calendar Super Display Telephone Only If the Calendar is not displayed, press the “Cal.” soft key. This key changes from “OneT” to “Cal.” depending on the view currently active on the Super Display telephone. When the Super Display phone is plugged in, the system sets the display in the calendar mode, with the current week displayed on the top row of the display. To scroll the calendar ahead, week by week, press the Soft Key 1 (top left). Pressing Soft Key 6 (top right) scrolls the calendar weeks back. To change the display back to the current week, press the Clear key. Press to scroll the weeks ahead.

Press to scroll the weeks back.

'03 MO TU WE TH FR SA SU 1 | 30

31

1

2

3

4

5

6

7

8

9

10

11

12

3 | 13

14

15

16

17

18

19

4 | 20

21

22

23

24

25

26

2|

OneT 5-22

THU

3:43PM

302 List CHECK

STA 302 Dir

ICM

Prog CLEAR

Press to switch to display the One-Touch keys.

Press to switch the display to the current week.

19

0893400_09.qxd

8/3/06

10:43 AM

Page 20

Call Forwarding Use Call Forwarding to redirect your calls to another extension. With Call Forwarding, you're sure your calls are covered when you are away from your work area. There are four types of Call Forwarding: G Call Forwarding when Busy or Not Answered Calls forward when your extension is busy or not answered. G Call Forwarding Immediate All calls forward immediately to the destination, and only the destination rings. G Call Forwarding when Not Answered Calls forward when your extension is not answered. G Call Forwarding Immediate with Both Ringing All calls forward immediately to the destination, and both the destination and your extension ring (not for Voice Mail). G Personal Answering Machine Emulation Have your phone emulate an answering machine. Turn to page 142 for more on Voice Mail. Call Forwarding will reroute calls ringing your extension, including calls transferred from another extension. You must enable Call Forwarding from your phone. To redirect your calls if you are at another phone, use Call Forward Follow Me on page 23. To activate or cancel 1. Call Forwarding:

+ OR

.

(Call Forward to Station). 2. Dial Call Forwarding condition: 1 = Personal Answering Machine Emulation (then skip to step 4) 2 = Busy or not answered 4 = Immediate 6 = Not answered 7 = Immediate with simultaneous ringing (not for Voice Mail) 0 = Cancel 20

0893400_09.qxd

8/3/06

10:43 AM

Page 21

Call Forwarding To activate or cancel 3. Dial destination extension, Voice Mail master number or press Voice Mail key. Call Forwarding You cannot forward to a Department (Cont’d): Group pilot number. Once you forward, only the destination can place an Intercom call to you. 4. Dial Call Forwarding type: 2 = All calls 3 = Outside calls only 4 = Intercom calls only 5.

to hang up (if you dialed in step 1). Your DND or Call Forwarding (Station) Programmable Function Key flashes when Call Forwarding is activated.

21

0893400_09.qxd

8/3/06

10:43 AM

Page 22

Call Forwarding Off-Premise Use Off-Premise Call Forwarding to forward your calls to an off-site location. Stay in touch when you're away from the office by forwarding to your cellular phone, home office, hotel or meeting room. To activate Call 1. Forwarding OffPremise: 1.

+ OR

. (Call Forward to Device).

2.

+ Dial line access code. Line access codes are 9 (ARS/Trunk Group Routing), 804 + Line Group (19, 01-99 or 001-200) or #9 + Line number (e.g., 05 or 005 for line 5). 3. Dial the outside number to which your calls should be forwarded. 4. 5.

to hang up (if you dialed *4 in step 1). Your DND or Call Forwarding (Device) Programmable Function Key flashes.

To cancel Call 1. Forwarding OffPremise 1.

+ OR

2.

+

3.

22

.

. (Call Forward to Device). .

to hang up (if you dialed *4 in step 1). Your DND or Call Forwarding (Device) Programmable Function Key stops flashing.

0893400_09.qxd

8/3/06

10:43 AM

Page 23

Call Forward Follow Me While you are at a co-worker's desk, you can direct your calls to your co-worker's extension. Use Call Forward Follow Me if you get detained with your co-worker longer than expected. Instead of ringing your own phone unanswered, your calls will ring you where you are. (To reroute calls from your own extension, use Call Forwarding on page 20.) To activate Call 1. Forward Follow Me: 1.

+ OR

. (Call Forward to Station).

2.

+ Dial your own extension number (i.e., the source). 3. Dial Call Forwarding type: 2 = All calls 3 = Outside calls only 4 = Intercom calls only 4.

to hang up (if you dialed in step 1). Your Call Forwarding (Station) Programmable Function Key flashes when Call Forwarding is activated.

To cancel Call Forward 1. Follow Me: 1. 2. 3.

+ OR

. (Call Forward to Station).

. to hang up (if you dialed in step 1). Your Call Forwarding (Station) Programmable Function Key goes out. 23

0893400_09.qxd

8/3/06

10:43 AM

Page 24

Call Forward/DND Override If you call an extension that is Call Forwarded or in Do Not Disturb, use Call Forwarding/DND Override to talk to the extension anyway. This is helpful, for example, if you have an important message or emergency and you must get through. To override an 1. Call the forwarded or DND extension. (Override). extension: 2.

24

0893400_09.qxd

8/3/06

10:43 AM

Page 25

Call Redirect Call Redirect allows you to transfer a call to a pre-defined destination (such as an operator, voice mail, or another extension) without answering the call. This can be useful if you are on a call and another rings in to your extension. By pressing the Call Redirect key, the call is transferred, allowing you to continue with your current call. The following types of calls cannot be redirected with the feature: G ACD G Door Box G Transferred G Virtual Extension G Department Group (all ring mode) The pre-defined destination has to be an extension number or voice mail pilot number. To redirect a ringing 1. With an incoming call ringing your call: extension, press (Call Redirect) without lifting the handset or pressing the CALL keys. A confirmation tone is heard over the telephone’s speaker. After pressing the Call Redirect key, the call will not recall the extension.

25

0893400_09.qxd

8/3/06

10:43 AM

Page 26

Call Timer You can time your outside calls on your telephone display. You'll find Call Timer indispensable if you must keep track of your time on the phone. For incoming calls, the Call Timer begins as soon as you answer the call. For outgoing calls, the Call Timer starts about 10 seconds after you dial the last digit. To time your outside 1. Place or answer the outside call. The Call Timer starts automatically. calls:

26

0893400_09.qxd

8/3/06

10:43 AM

Page 27

Call Waiting/Camp On After you call a busy extension, use Call Waiting to wait in line (i.e., Camp On) without hanging up. When you Camp On, the system signals the busy indicating that you are waiting. Your call goes through when the busy extension becomes free. Call Waiting also helps when you are on the phone because it lets you know when additional calls are trying to get through. Call Waiting lets your callers wait in line without being forgotten. Note: When you call a busy attendant, your call will normally "stack up" in queue behind other waiting callers. To Camp On to a busy 1. Call the busy extension. You must hear extension: busy tone. 2. or (Camp On). 3. Wait without hanging up. Your Camp On Programmable Function Key lights while you wait. If you hang up, the system converts your Camp On to a Callback (see page 28). To Camp On to a trunk, see the Trunk Queuing feature on page 141. To cancel a Camp On 1. Hang up. If you skip step 2, the extension will request: call you back when it becomes free. 2.

+ OR

.

(Camp On). Your Camp On Programmable Function Key goes out. 27

0893400_09.qxd

8/3/06

10:43 AM

Page 28

Callback When you call a busy extension, you can leave a Callback request for a return call. You do not have to repeatedly call the busy extension back, hoping to find it idle. When you leave a Callback, the system handles your request as follows: G When the busy extension becomes idle, the system rings you. G After you answer the Callback ring, the system then rings the formerly busy extension. (If that extension doesn't answer, the system cancels the Callback.) G As soon as the other extension answers, the system sets up an Intercom call between you and them. If your phone has Automatic Callback, you answer the Callback ring as soon as you lift the handset. If your phone doesn't have Automatic Callback, you must press the ringing line appearance key to answer the Callback ring. To place a Callback: 1. Call a busy extension. 2. or 3. Hang up. 4.

To cancel a Callback: 1.

(Callback).

when busy extension calls you back. If you don't have Automatic Callback, you'll have to press the ringing Line Appearance key. + OR

. (Callback).

28

0893400_09.qxd

8/3/06

10:43 AM

Page 29

Caller ID Caller ID allows a display keyset to show an incoming caller’s telephone number (up to 12 digits) and optional name. The Caller ID information can be displayed before and after answering a call. The system provides the Caller ID pre-answer display which allows you to preview the caller’s number before picking up the ringing line. Depending on programming, it may also be displayed after answering a call. This information is stored in Abbreviated Dialing bins or under one-touch keys. Display telephone s have the ability to check the identity of an incoming call while they are currently busy on a call. The type of information that displays will depend on the type of call being received. Intercom calls will display station names, while incoming trunk calls will display Caller ID, ANI or the name assigned to the line. Depending on the system programming, this information can be displayed either automatically or manually. Caller ID will temporarily store 50 calls (this included abandoned or unanswered calls). New calls replace the old calls when the maximum number of calls is reached. An unanswered call will cause the Call History key to flash, indicating a new call has been placed in the temporary memory. If enabled in programming, the telephone’s display will show “CHECK LIST”. . To display Caller ID 1. Do not lift the handset and press If the Caller ID data includes the for calls lamping your name, you can scroll left and right by phone or not autopressing * and #. matically displayed (without Automatic or press to answer the call. Handsfree enabled): 2. (Park). To display Caller ID 1. Do not lift the handset + If Automatic Handsfree is enabled, for calls in Park: press FLASH then the PARK key.

29

0893400_09.qxd

8/3/06

10:43 AM

Page 30

Caller ID To manually display 1. While on a call with a second call ringing caller information for in, press + flashing . a second call: The display indicates caller information. To view Caller ID after answering a call when Privacy Release is used, press CHECK + CLEAR. Pressing the line key can also be done, but the call is then made private. 2. To clear the display, either press or it will clear on its own. 1. Press the LIST soft key. To review your 2. Press the CID soft key. answered/ The first row of your display shows unanswered Caller ID the Caller ID number. If there is an “*” calls: next to the call record number in the left-hand corner, this indicates that it is a call you missed. The second row shows the date and time of the call. If the Caller ID includes a name, you can press the CHECK key to view the number of the caller. 3. Press the UP and DOWN soft keys to see the list of calls available in the buffer. 4. To call the displayed number, press . OR To erase the displayed number without returning the call, press the DEL soft key. 5. You may be given the option to deleted One or All numbers. Press the desired Soft Key. When deleting all, press YES to confirm the deletion or press exit without deleting. 5. 30

to hang up.

to

0893400_09.qxd

8/3/06

10:43 AM

Page 31

Caller ID To store a Caller ID You can store the Caller ID data in the sysnumber in an tem’s Abbreviated Dial Table or in one of Abbreviated Dial bin: your One Touch keys. 1. With a keyset in an idle condition, press the LIST Soft Key. 2. Press the CID Soft Key (Caller ID). The display shows: ##: xxxxxxxxxxxxx mm-dd hh:mm ↑ ↓ Store DEL ## = List Number xx = Caller ID number mm-dd hh:mm = incoming date/time ↑ = Preview List ↓ = Next List Store = Store in List DEL = Delete from List 3. Press the STORE Soft Key. The display shows: ##: xxxxxxxxxxxxx mm-dd hh:mm OneT AbbC ABBg ## = List Number xx = Caller ID number mm-dd hh:mm = incoming date/time OneT = Store in One-Touch key ABBc = Store in Common Abbreviated Dial bin ABBg = Store in Group Abbreviated Dial bin

4. Press the ABBC or ABBG Soft Key. 5. Dial the Abbreviated Dial bin in which the number is to be stored. If you press HOLD, the next available Abbreviated Dial bin will be used. If all Abbreviated Dial bins are used, the display shows “TABLE IS FULL”. 6.

. 31

0893400_09.qxd

8/3/06

10:43 AM

Page 32

Caller ID To store a Caller ID 7. Enter the name to be associated with the stored number. number in an For information on entering names, Abbreviated Dial bin refer to the Name Storing feature. (Cont’d): Names can be up to 12 digits long. 8.

.

9.

to hang up.

To store a Caller ID You can store the Caller ID data in the sysnumber in a One- tem’s Abbreviated Dial Table or in one of Touch key: your One Touch keys. 1. With a keyset in an idle condition, press the LIST Soft Key. 2. Press the CID Soft Key (Caller ID). The display shows: ##: xxxxxxxxxxxxx mm-dd hh:mm ↑ ↓ Store DEL ## = List Number xx = Caller ID number mm-dd hh:mm = incoming date/time ↑ = Preview List ↓ = Next List Store = Store in List DEL = Delete from List 3. Press the STORE Soft Key. The display shows: ##: xxxxxxxxxxxxx mm-dd hh:mm OneT AbbC ABBg ## = List Number xx = Caller ID number mm-dd hh:mm = incoming date/time

32

0893400_09.qxd

8/3/06

10:43 AM

Page 33

Caller ID OneT = Store in One-Touch key ABBc = Store in Common Abbreviated Dial bin ABBg = Store in Group Abbreviated Dial bin

To store a Caller ID number in a OneTouch key (Cont’d):

4. Press the ONET Soft Key. 5. Press the One-Touch key in which the number is to be stored or dial 1-9, 0. If you press HOLD, the next available One-Touch key will be used. If all One-Touch keys are used, the display shows “TABLE IS FULL”. 6. . 7. Enter the name to be associated with the stored number. For information on entering names, refer to the Name Storing feature. Names can be up to 12 digits long. 8.

.

9.

to hang up

(Call History) or press the To call a number 1. Press LIST Soft Key and CID. stored in temporary The last addition to the list is displayed. memory: 2. Press the ARROW DOWN Soft Key to scroll through the list of numbers in memory. 3. Press the DEL Soft Key to delete the entry and scroll to the next entry. The Call History key will remain on as long as entries remain in memory. For i-Series phones, press CHECK + 9 to delete all call entries. 4. To place a call back to a number in the temporary memory list, with the number to be dialed displayed, press a line, loop or CALL key. 33

0893400_09.qxd

8/3/06

10:43 AM

Page 34

Center Telephone Book The Center Telephone Book provides each one or two personal telephone books which can be used to store numbers (50 or 100 depending on your system). Multiple extensions can be assigned the same telephone book allowing s to share commonly used numbers. Numbers can be stored using Last Number Dialed and Caller ID and each Telephone Book can be protected. 1. Press PROG Soft Key + Soft Key a new twice. telephone book to 2. Press the TELBK Soft Key. enter new data: 3. Press Soft Key 1 (Registration). Pressing the CONF key from this screen on will back up the view to the previous screen. 4. You may need to press Soft Key 1 or 2 to select the Telephone Book to new data. 5. Input the name (up to 12 digits) + . 6. Using the dial pad, select the Group number. 7. Enter the number to be stored + . 8. Enter the bin number where the telephone number is to be stored + . The number is stored and the next available bin number is automatically displayed.

34

0893400_09.qxd

8/3/06

10:43 AM

Page 35

Center Telephone Book Press PROG Soft Key + Soft Key twice. Press the TELBK Soft Key. Press Soft Key 2 (Search). Pressing the CONF key from this screen on will back up the view to the previous screen. 4. You may need to press Soft Key 1 or 2 to select the Telephone Book to select the Telephone Book to search. By default, the will search by name (indicated by the [A] in the upper right-hand corner of the display. Soft Key 1 will step through the different search options (numbers, Kana, alpha). To search by number, press the NUM soft key - the [A] changes to [1]. 5. Enter the search characters.

1. Search the Center Telephone Book by 2. name: 3.

6. Press

or

keys to search.

7. To dial the selected name, press . OR To view the detail of the flashing item, press + to dial the number. 8. Pressing the item number on the dial pad selects an item. Pressing the CONF key will back up the view to the previous screen.

35

0893400_09.qxd

8/3/06

10:43 AM

Page 36

Center Telephone Book 1. Press PROG Soft Key + Soft Key Search the Center twice. Telephone Book by 2. Press the TELBK Soft Key. group name: 3. Press Soft Key 2 (Search). Pressing the CONF key from this screen on will back up the view to the previous screen. 4. You may need to press Soft Key 1 or 2 to select the Telephone Book to search. By default, the will search by name (indicated by the [A] in the upper right-hand corner of the display. Soft Key 1 will step through the different search options (numbers, Kana, alpha). To search by number, press the NUM soft key - the [A] changes to [1]. 5. Press Soft Key 2 (Menu). 6. Press Soft Key 2 (Group). 7. Using the dial pad, select the group to search + 8. Press

. or

to search.

9. To dial the selected name, press . OR To view the detail of the flashing item, press . You can then press to dial the number. Pressing the item number on the dial pad selects an item. Pressing the CONF key will back up the view to the previous screen. 36

0893400_09.qxd

8/3/06

10:43 AM

Page 37

Center Telephone Book 1. Press PROG Soft Key + Soft Key Search the Center twice. Telephone Book by 2. Press the TELBK Soft Key. telephone number: 3. Press Soft Key 2 (Search). Pressing the CONF key from this screen on will back up the view to the previous screen. 4. You may need to press Soft Key 1 or 2 to select the Telephone Book to search. 5. Press Soft Key 2 (Menu). 6. Press Soft Key 3 (Number). 7. Enter the search number(s). At least one digit must be entered before the search can be done. 8. Press

or

to search.

9. To dial the selected name, press . OR To view the detail of the flashing item, press . You can then press to dial the number. Pressing the item number on the dial pad selects an item. Pressing the CONF key will back up the view to the previous screen.

37

0893400_09.qxd

8/3/06

10:43 AM

Page 38

Center Telephone Book 1. Search the Center Telephone Book by 2. memory number: 3.

4. 5. 6. 7.

Press PROG Soft Key + Soft Key twice. Press the TELBK Soft Key. Press Soft Key 2 (Search). Pressing the CONF key from this screen on will back up the view to the previous screen. You may need to press Soft Key 1 or 2 to select the Telephone Book to search. Press Soft Key 2 (Menu). Press Soft Key 4 (Memory). Enter the memory number to be searched. At least one digit must be entered before the search can be done.

8. Press

or

to search.

9. To dial the selected name, press . Pressing the CONF key will back up the view to the previous screen. Press PROG Soft Key + Soft Key twice. Press the TELBK Soft Key. Press Soft Key 4 (Delete All). Pressing the CONF key from this screen on will back up the view to the previous screen. 4. You may need to press Soft Key 1 or 2 to select the Telephone Book to search. 5. Enter the 4-digit assigned in system programming or through the SETTING Soft Key.

1. Delete ALL the Center Telephone Book 2. information: 3.

38

0893400_09.qxd

8/3/06

10:43 AM

Page 39

Center Telephone Book 6. Press Soft Key

3

(Yes) to delete all the

Delete ALL the Center Telephone Book information (Cont’d):

entered data, or press Soft Key 4 (No) to back up. Press the CONF key to back up the view to the previous screen.

1. Delete ONE entry in the Center Telephone 2. Book: 3.

Press PROG Soft Key + Soft Key twice. Press the TELBK Soft Key. Press Soft Key 2 (Search). Pressing the CONF key from this screen on will back up the view to the previous screen. You may need to press Soft Key 1 or 2 to select the Telephone Book to search. Press Soft Key 2 (Menu). Press the appropriate Soft Key to search by Name, Group, Number, or Memory Number. Refer to the “Search” operations above for details on the specific steps for the option you select. Locate the entry to be changed + to display the details of the entry. Press Soft Key 4 (Delete). Press Soft Key 3 (Yes) to delete the record or press Soft Key 4 (No) to cancel the deletion process. Pressing YES displays a confirmation message.

4. 5. 6.

7. 8. 9.

10. Press

as needed to exit out of the

displays or press to return the phone to an idle state. 39

0893400_09.qxd

8/3/06

10:43 AM

Page 40

Center Telephone Book 1. Change the Telephone Book data: 2. 3.

4. 5. 6.

7.

Press PROG Soft Key + Soft Key twice. Press the TELBK Soft Key. Press Soft Key 2 (Search). Pressing the CONF key from this screen on will back up the view to the previous screen. You may need to press Soft Key 1 or 2 to select the Telephone Book to search. Press Soft Key 2 (Menu). Press the appropriate Soft Key to search by Name, Group, Number, or Memory Number. Refer to the “Search” operations above for details on the specific steps for the option you select. Locate the entry to be changed and press

to display the details of the entry. 8. Press Soft Key 3 (Change). 9. To change the name, press

+ the

new name + . You can now change the group or memory number or press to exit. OR To change the memory number, press , at the ENTER REGIST MEMORY display, press . Select the new memory number to be used for the number + 40

. Press Soft Key

3

to

0893400_09.qxd

8/3/06

10:43 AM

Page 41

Center Telephone Book Change the Telephone Book data (Cont’d):

overwrite the current information or press Soft Key 4 to cancel and allow you to select a new memory number. You can now select a new entry to edit or press to exit. OR To change the group and memory number, press + then using the dial pad, select the group number to be assigned. The display flashes the saved telephone number - press . You can now change the telephone number +

. At the ENTER

REGIST MEMORY display, press Select the new memory number to be used for the number + Key

3

.

. Press Soft

to overwrite the current informa-

tion or press Soft Key 4 to cancel and allow you to select a new memory number. You can now select a new entry to edit or press

to exit.

While reviewing the Caller ID list, a a Caller ID can add a record into the Center Telephone number to the Center Book with the following operation. This Telephone Book: function can only be performed if the Center Telephone Book is unlocked.

41

0893400_09.qxd

8/3/06

10:43 AM

Page 42

Center Telephone Book 1. From an idle keyset, press Soft Key 1 a Caller ID for List. number to the Center 2. Press Soft Key 1 (Redial). Telephone Book 3. From an idle keyset, press Soft Key 1 (Cont’d): for List. 4. Press Soft Key 2 (CID). 5. Use the and Soft Keys to display the desired Caller ID record. 6. Press Soft Key 3 (Store). 7. Press Soft Key 3 (TELBK). 8. You may need to press Soft Key 1 or 2 to select the Telephone Book to be used. 9. To enter/change the name, press + enter the new name. Press

.

10. Enter the group number. Press , then using the dial pad, select the group number to be assigned. The display flashes the saved telephone number press

. You can now change the

telephone number, then press . At the ENTER REGIST MEMORY display, press . Select the new memory number to be used for the number and press . If the memory number selected was already defined, press Soft Key 3 to overwrite the current information or press Soft Key 4 to cancel 42

0893400_09.qxd

8/3/06

10:43 AM

Page 43

Center Telephone Book a Caller ID number to the Center Telephone Book (Cont’d):

and allow you to select a new memory number. You can now select a new entry to edit or press the displayed window.

to back up

While reviewing the Last Number Dialed a LND (LND) list, a can add a record into the number to the Center Center Telephone Book with the following Telephone Book: operation. This function can only be performed if the Center Telephone Book is unlocked. 1. From an idle keyset, press Soft Key 1 for List. 2. Press Soft Key 1 (Redial). 3. Use the and Soft Keys to display the desired LND record. 4. Press Soft Key 3 (Store). 5. Press Soft Key 3 (TELBK). 6. You may need to press Soft Key 1 or 2 to select the Telephone Book in which the number should be stored. 7. To enter/change the name, press + enter the new name +

.

8. Enter the group number. Press , then using the dial pad, select the group number to be assigned. The display flashes the saved telephone number press . You can now change the telephone number, then press . At the ENTER REGIST MEMORY display, 43

0893400_09.qxd

8/3/06

10:43 AM

Page 44

Center Telephone Book press . Select the new memory number to be used for the number + . If the memory number selected was already defined, press Soft Key 3 to overwrite the current information or press Soft Key 4 to cancel and allow you to select a new memory number. You can now select a new entry to edit or press

a LND number to the Center Telephone Book (Cont’d):

to back up the displayed window. 1. Change the Group Name: 2. 3.

4. 5. 6. 7.

8.

Press PROG Soft Key + Soft Key twice. Press the TELBK Soft Key. Press Soft Key 3 (Setting). Pressing the CONF key from this screen on will back up the view to the previous screen. You may need to press Soft Key 1 or 2 to select the Telephone Book to edit. Press Soft Key 1 (Group Name Edit). Using the dial pad, select the Group number. Enter the new name to be stored + . The display indicates "ED!" then returns to the Select Group display. You can now edit another group name, press

to return to the previous

menu display, or press

44

to exit.

0893400_09.qxd

8/3/06

10:43 AM

Page 45

Center Telephone Book 1. Press PROG Soft Key + Soft Key Lock or Unlock a twice. Telephone to prevent 2. Press the TELBK Soft Key. or allow changes: 3. Press Soft Key 3 (Setting). Pressing the CONF key from this screen on will back up the view to the previous screen. 4. Press Soft Key 3 (Lock). 5. Using the dial pad, select the Group number. 6. If the Telephone Book is unlocked, the display shows “[LOCK TELBOOK]”. Enter the 4-digit . If the Telephone Book is locked, the display shows “[UNLOCK TELBOOK]”. Enter the 4-digit . 7. Press

to return to the previous

menu display or press

to exit.

1. Press . Lock or Unlock a 2. Enter the Lock Telephone Book service Telephone using a code ( your telephone istraservice code: tor for this code). 3. Enter the destination extension number. 4. Enter the extension’s ( your telephone for this code).

45

0893400_09.qxd

8/3/06

10:43 AM

Page 46

Center Telephone Book 1. Press PROG Soft Key + Soft Key Change the twice. a enters to 2. Press the TELBK Soft Key. lock/unlock the 3. Press Soft Key 3 (Setting). Telephone Book: Pressing the CONF key from this screen on will back up the view to the previous screen. 4. Press Soft Key 4 (). 5. Using the dial pad, enter the current (0000 by default, or your telephone for this code). 6. Enter the new 4-digit . The display indicates NEW IS SET. 7. You can now press

to return to the

previous menu display or press exit.

46

to

0893400_09.qxd

8/3/06

10:43 AM

Page 47

Conference Conference lets you add additional inside and outside callers to your conversation. With Conference, you can set up a multiple-party telephone meeting without leaving the office. In addition to Conference, there are other ways to have a telephone meeting. See Voice Call Conference (page 48), Meet Me Conference (page 80), Meet Me Paging (page 82) and Tandem Trunking (page 133). To set up a 1. Place or answer call. Conference: 2. or (Conference). 3. Place the next call. To access the outside call, either press or dial a trunk access code. See Outside Calls on pages 84 and 86 for more. If the second call to be conferenced is ringing in, place the first call on hold, answer the ringing call, then follow the steps below. 4.

or (Conference). You may be able to have up to 32 callers. Repeat this step to add more parties.

5. After adding all parties, press again to begin the Conference. Split (separate) the Conference calls by pressing HOLD + 894. to hang up. To exit a Conference 1. You can set up a Conference with two (without affecting the outside callers and then drop out of the other parties): call - leaving the callers talking in an Unsupervised Conference. Refer to Tandem Trunking on page 133 for more. 47

0893400_09.qxd

8/3/06

10:43 AM

Page 48

Conference, Voice Call With Voice Call Conference, others in your work area can easily into your outside calls. To initiate a Voice Call Conference, press a uniquely programmed Voice Call Conference key and tell your coworkers to the call. The system releases the privacy on the line, and other s can just press the line key to in. The system allows either four or eight parties maximum per Conference. Voice Call Conference does not use the telephone system features to announce the call. You just announce it "through the air" to your co-workers. In addition to Voice Call Conference, there are other ways to have a telephone meeting. See Conference (page 47), Meet Me Conference (page 80), Meet Me Paging (page 82) and Tandem Trunking (page 133). To set up a Voice Call 1. Place or answer trunk call. Conference with a co(Voice Call Conference). worker in your imme- 2. diate work area: 3. Announce Voice Call Conference. Just tell your co-worker's about the call. Do not use telephone system features to announce it. To a Voice Call 1. After Conference request, press indicated Conference line key ( ). (if invited):

To exit a Voice Call 1. Conference without affecting the other parties:

48

to hang up.

0893400_09.qxd

8/3/06

10:43 AM

Page 49

Conversation Record

This feature requires either an optional NVM-Series Voice Mail system or an AspireMail PCB installed in the system.

While on a call, press your Record key to record the conversation in your mailbox. Voice Mail stores the conversation like any other voice message. You can then save, edit or delete the recorded conversation. For additional voice mail features, refer to page 142.

Recording Your Call To record your active 1. call in your mailbox:

(Conversation Record). You hear two beeps and your Record key flashes. The beeps periodically remind you that you are recording.

49

0893400_09.qxd

8/3/06

10:43 AM

Page 50

Department Calling If you work closely with a group of co-workers, your Communications Manager may have programmed you into a Department Calling Group. Department Calling makes it easier for others in your company to send calls to your group. This is because your Department Calling Group has a dedicated pilot number. To get a free group member, co-workers can just dial the pilot number instead of the group member's extensions. If you don't want to receive Department Calls, you can log out of your group. You can log back in when you again want to receive calls. Calls into your Department Group can route in two different ways: Priority Routing and Circular Routing. With Priority Routing, incoming calls route to your group's highest priority extensions first. Priority Routing

Call

Call

N2

IP-1

1

Call

50

0893400_09.qxd

8/3/06

10:43 AM

Page 51

Department Calling With Circular Routing, each call rings a new extension. Circular Routing

Call 1

Call 2

N2

IP-1

0

Call 3

Call 4

To call a Department 1. Group: To log out of your 1. Department Group:

+ Department Group pilot number.

+ OR

+

.

(Department Group log out). The key lights while you are logged out. To return to your 1. Department Group: 1.

+ OR

+

.

(Department Group ). The key goes out when you log back in. 51

0893400_09.qxd

8/3/06

10:43 AM

Page 52

Department Step Calling If you place an Intercom call to a busy Department Group member, Department Step Calling allows you to quickly call another member in the same group. You don't have to hang up and place another Intercom call. You can also use Department Step Calling to cycle through the of a Department Group. To make a Step Call: 1. Place call to busy Department Group member. OR Place call to Department Group pilot number. 2. or (Step Call). 3. Repeat step 2 to call other Department Group .

52

0893400_09.qxd

8/3/06

10:43 AM

Page 53

Dial Number Preview Use Dial Number Preview to preview a number in your telephone's display before you dial it out. This helps you avoid dialing errors. For example, if you review the previewed number and find an error, you can cancel the number and re-enter it correctly. Dial Number Preview is available for both outside and Intercom calls. . To use Dial Number 1. Do not lift handset or press Preview to place a call: 2. Dial the number you want to preview. If VRS is installed, you will need to press then dial the number to be previewed. 3.

to dial out the displayed number. If the displayed number is an outside number, it must contain a line access code. OR to cancel the number without dialing it out. OR to dial out the displayed outside number on the selected line. If your previewed outside number has a trunk access code (e.g., 9), you can press instead. The system will not automatically strip out a trunk access code when you press a line key.

53

0893400_09.qxd

8/3/06

10:43 AM

Page 54

Dial Pad Confirmation Tone When you enable Dial Pad Confirmation Tone for your extension, you hear a beep each time you press a dial pad key. This beep reminds you that you have pressed a key. The confirmation tone is particularly helpful for Intercom calls and calls on Dial Pulse lines. For these types of calls, you don't hear tones echoed back to your handset or speaker to confirm your dialing. To enable or disable 1. Dial Pad Confirmation Tone: 2.

54

+ . You hear confirmation beeps. to hang up.

0893400_09.qxd

8/3/06

10:43 AM

Page 55

Directed Call Pickup Use Directed Call Pickup when you need to answer a call ringing another extension without leaving your phone. This lets you easily cover a co-worker's calls when they have to be away from their desk. or . To intercept calls ring- 1. ing a co-worker's . phone: 2. 3. Dial your co-worker's extension number.

55

0893400_09.qxd

8/3/06

10:43 AM

Page 56

Directory Dialing If you have a Display or Super Display phone, Directory Dialing allows you to select a co-worker or outside number from a list of names, rather than dialing the phone number. There are four types of Directory Dialing: ABBC - Company (Common) Abbreviated Dialing ABBG - Department (Group) Abbreviated Dialing OneT - Personal Abbreviated Dialing (One-Touch Keys) EXT - Co-worker’s extension Directory Dialing follows any feature restrictions that your system may have enabled. For example, if your extension cannot normally use Common Abbreviated Dialing, Directory Dialing can’t access it either. or . To use Directory 1. Do not press Dialing from a display 2. Press the Directory Dialing Soft Key. keyset: If you wait too long between your selections, Directory Dialing automatically cancels. 3. Press the Soft Key for the Directory Dialing type from the table below: ABBc = Company (Common Abbreviated Dialing) ABBg = Department (Group) Abbreviated Dialing OneT = Personal Abbreviated Dialing (One-Touch Keys) EXT = Extensions Directory Dialing follows any feature restrictions that your system may have enabled. For example, if your extension cannot normally use Common Abbreviated Dialing, Directory Dialing can’t access it either.

56

0893400_09.qxd

8/3/06

10:43 AM

Page 57

Directory Dialing To use Directory 4. Dial the first letter/number for the Dialing from a display name/number you want to call. For example, dial 2 for A, B, C or 2. keyset (Cont’d): 5. Press the Down Arrow Soft Key to jump to that section. 6. Press or to scroll through all the names/numbers that begin with that letter/number. If you wait too long between your selections, Directory Dialing automatically cancels. OR or press , place the selected call. To cancel Directory 1. Press Dialing:

or

to

.

57

0893400_09.qxd

8/3/06

10:43 AM

Page 58

Display Adjustment The keyset’s display provides a 3-line, 24 character per line alphanumeric display that displays various information for the telephone either while on a call or while idle. You can change the contrast of the display as well as the language used when displaying the prompts. To adjust contrast: 1.On an idle telephone with no BGM, or

.

Pressing either volume key adjusts the LCD display. If BGM is enabled for the phone, in order to change the contrast, it must first be disabled (CALL + 825) or it will adjust the speaker volume. + + the lanTo change the 1. Press displayed language: guage number to be displayed (00-12). 0 = Japanese 1 = English 2 = German 3 = French 4 = Italian 5 = Spanish 6 = Dutch 7 = Portuguese 8 = Norwegian 9 = Danish 10 = Swedish 11 = Turkish 12 = Latin American Spanish

58

0893400_09.qxd

8/3/06

10:43 AM

Page 59

Do Not Disturb Do Not Disturb (DND) blocks incoming calls, Call Forwards and Paging announcements to your extension. DND permits you to work undisturbed at your desk without interruptions from your phone. When you activate DND, incoming calls still flash your line keys. While in DND, you may use your phone in the normal manner for placing and processing calls. There are four Do Not Disturb options: Do Not Disturb Options 1 2 3 4 0

Blocks your outside calls Blocks Paging, Intercom calls, Call Forwards and transferred outside calls Blocks all calls Blocks Call Forwards Cancels Do Not Disturb

To activate or deacti- 1. Do not lift the handset. vate Do Not Disturb: Depending on your software, you may be able to set DND while on a call by pressing DND. 2. OR + . If you wait more than 10 seconds before going to step 3, your system automatically enables option 3. If you already have DND enabled, waiting more than 10 seconds cancels it. 3. Dial the DND option code (0-4).

59

0893400_09.qxd

8/3/06

10:43 AM

Page 60

Door Box Your system may have Door Boxes. A Door Box is a self-contained Intercom unit typically used to monitor entrance doors. A visitor at the door can press the Door Box call button (like a door bell). The Door Box then sends chimes to certain extensions. If you receive Door Box chimes, you can just lift the handset to answer them. You can then talk to the visitor at the door. Door Boxes come in handy at delivery entrances. Your company doesn't have to have someone at the door to monitor the entrance. You can just answer the Door Box instead. If the door has an electric strike, you can even use your telephone to release the door. To call a Door Box: 1.

+ number (1-8).

+ Door Box

To answer a Door Box 1. chime: To activate the Door 1. While talking to the Door Box, press Box strike: .

60

0893400_09.qxd

8/3/06

10:43 AM

Page 61

DSS Console If you do a lot of call processing (like an operator or dispatcher), you may have either a 110-Button DSS Console or 24Button Direct Line Selection (DLS) Console. The DSS Console gives you a Busy Lamp Field (BLF) and one-button access to extensions, trunks and certain system features. Use the DSS Console to help you: G G G G G

Call Extensions and Door Boxes Place, answer and Transfer outside calls Make Internal or External Pages Switch the Night Service mode Activate DSS Console Alternate Answer (i.e., redirect your calls to another DSS Console)

Your DSS Console may also have keys stored with dialing codes or Programmable Function Key operations. This gives your DSS Console many of the features available on One-Touch and function keys. Check with your Communications Manager to see if your console has these functions. To call an extension 1. With the 110-button console, press from your DSS EXT.1 or EXT.2 to select the range. Console: 2. Press DSS Console key. If your call voice-announces, you can make it ring by dialing 1. If you don't have Handsfree, lift the handset to speak. Extension BLF If DSS key is . . .Extension is . . . On Busy on a call Off Idle Flashing fast In DND

61

0893400_09.qxd

8/3/06

10:43 AM

Page 62

DSS Console To place an outside 1. Press DSS Console key assigned to outcall from your DSS side line. Console: 2. Dial outside telephone number. If you don't have Handsfree, you must lift the handset to speak. Outside Line BLF If DSS key is . . .Outside line is . . . On Busy on a call Off Idle Flashing slowly Ringing

To answer an outside 1. Press flashing DSS Console key call from your DSS assigned to outside line. Console: To call a Door Box 1. Press DOOR + DSS Console key for from your DSS Door Box you want to call (1-8). If you don't have Handsfree, you Console: must lift the handset to talk to the Door Box. Door Box BLF If DSS key is . . .Door Box is . . . On Busy or ringing in Off Idle

62

0893400_09.qxd

8/3/06

10:43 AM

Page 63

DSS Console To Transfer a call 1. Place or answer call. If you are on an Intercom call, press using your DSS Console: before going to the next step. 2. Press DSS Console key for extension that will receive Transfer. You cannot Transfer to an extension that is busy or in DND. 3. (Optional) Announce call. If the called party doesn't want the call, press flashing to retrieve it. 4.

to hang up.

To make a Page using 1. Press PAGE (for External Paging) or your DSS Console: GROUP (for Internal Paging). 2. Press DSS Console Paging key. DSS keys 1-8 are for External Paging zones 1-8. DSS keys 1-64 are for Internal Paging zones 1-64. (If the zone is busy, try again later.) If you don't have Handsfree, lift the handset to make your announcement. Paging BLF If DSS key is . . . Zone is . . . On Busy Off Idle

63

0893400_09.qxd

8/3/06

10:43 AM

Page 64

DSS Console Switching the Night 1. Press Night Service key (NIGHT, DAY, Service mode from BREAK or NITE 2). your DSS Console: Night Service BLF If this key is lit . . . System in the . . . NIGHT Night Mode DAY Day Mode BREAK Rest Mode NITE2 Midnight Mode

To activate DSS 1. Press ALT. You hear a short confirmation tone. Console Alternate If you hear a long tone, you cannot Answer: enable Alternate Answer. Another has already enabled your console as their Alternate Answer destination. Alternate Answer BLF When the ALT Alternate Answer key is . . . is . . . On Enabled Off Disabled

64

0893400_09.qxd

8/3/06

10:43 AM

Page 65

Flash Flash allows you to access certain features of the telephone company or PBX to which your phone system is connected. This lets you take full advantage of whatever features the connected telephone company or PBX offers. Flash accesses these features by momentarily interrupting the loop current on your outside line. This is much like briefly pressing and then releasing the hookswitch on your telephone at home. To flash the outside 1. line you are on:

65

0893400_09.qxd

8/3/06

10:43 AM

Page 66

Forced Trunk Disconnect Forced Trunk Disconnect enables you to disconnect (release) another extension's active outside call if you need to use their line. You can then place a call on the released line. CAUTION Forced Trunk Disconnect abruptly terminates the active call on the line. You should use this feature only in an emergency and when no other lines are available.

To disconnect a busy 1. Press trunk: OR

for the busy trunk.

Dial trunk access code (e.g., + trunk number). 2.

3.

66

. You hear confirmation beeps as the system disconnects the line. You can now place a call on the free line. to hang up.

0893400_09.qxd

8/3/06

10:43 AM

Page 67

General Message

This feature requires the Voice Response System (VRS) provided by the DSP daughter board (DSPDB).

A General Message is a prerecorded Voice Response System (VRS) message to which you and your co-worker's can listen. This message typically contains important company information that all employees should hear. To listen to the 1. Do not lift the handset or press General Message: 2. + To record, listen to or 1. erase your General Message: 2. To record, dial OR To listen, dial OR

.

. . .

To erase, dial . If you dial 5 or 7, you can dial # to hear the message again. If you dial 3, you can press HOLD to cancel before going to the next step. 3.

to hang up. MW flashes on each phone until the listens to the message.

67

0893400_09.qxd

8/3/06

10:43 AM

Page 68

Group Call Pickup If you frequently work together with the same people, your extensions may be in a Call Pickup Group. This allows you and your co-workers to use Group Call Pickup to easily answer each other's ringing calls. Group Call Pickup also helps if you frequently cover for co-workers in another Pickup Group. When a call rings one of their phones, you can intercept it even if you don't know their extension numbers. With Group Call Pickup, you can intercept the following types of calls: G A call ringing an extension in your own Pickup Group. G A call ringing an extension in another Pickup Group when you know the group number. G A call ringing an extension in another Pickup Group when you don't know the group number. To answer a call ring- 1. ing another phone in your Pickup Group:

+ OR +

(Pickup). .

To answer a call When you don't know the Pickup Group ringing a phone in Number another Pickup Group: 1. + (Pickup). OR + . When you know the Pickup Group number 1.

+ OR

(Pickup).

+ + Pickup Group number (1-9 or 01-64). 68

0893400_09.qxd

8/3/06

10:43 AM

Page 69

Group Listen Use Group Listen when you want others in your office to listen in on your call. While you talk on the handset, your caller's voice broadcasts over your telephone's speaker. Group Listen automatically turns your Handsfree microphone off so your caller cannot hear the conversation in your office. To initiate Group 1. Place or answer call using the handset. Listen: 2. twice (but do not hang up). SPK flashes slowly. You can talk to the caller through your handset. Your co-workers hear your caller's voice over your phone's speaker. When you press SPK once, you turn your Speakerphone on and your handset off. The second press turns on Group Listen. To talk Handsfree 1. You must have a speakerphone for after initiating Group Handsfree operation. Listen:

. To cancel Group 1. Do not hang up + Press flashing You can talk to your caller over your Listen (without hanghandset. Your co-workers can no longer ing up your call): hear your caller's voice.

69

0893400_09.qxd

8/3/06

10:43 AM

Page 70

Handsfree and Monitor When it's inconvenient to hold the handset, you can use the speaker and microphone in your telephone and talk Handsfree instead. Handsfree is great when you don't have a free hand for the phone. (For example, you may want to enter data at a computer terminal while talking to a customer on the phone.) There are three types of Handsfree operation: Handsfree

Automatic Handsfree Monitor

You can place and answer calls by pressing SPK instead of using the handset. You must have a Speakerphone to have Handsfree. Check with your Communications Manager. You can press a line or line appearance key without first lifting the handset or pressing SPK. Your Communications Manager may have enabled this option for you. You can place a call without lifting the handset, but you must lift the handset to speak. You always have this option - regardless of the type of phone you have or how your system is set up.

or or . To talk Handsfree: 1. 2. Place call. 3. Speak toward phone when called party answers. To change a handset 1. call into a Handsfree call: 2. To change a 1. Handsfree call into a handset call: 70

and hang up the handset. to hang up when you are done.

0893400_09.qxd

8/3/06

10:43 AM

Page 71

Headset Operation To get even more freedom and convenience than with Handsfree, purchase a Headset and connect it to your telephone. In addition to having your hands free for other work, you'll have privacy on a call that is not available with Handsfree. With a Headset installed, either the handset or Headset can be used for calls. To enable the 1. Plug in the headset into the headset jack headset: on the bottom of the phone. (Headset) then press To use the headset: 1. Press to make an outside call. OR Press (Headset) to get Intercom dial tone. OR If on a call, (Headset) to hang up. The headset key lights when you enable the headset mode. You can still receive and respond to voice-announced Intercom calls with a headset connected to the phone.

71

0893400_09.qxd

8/3/06

10:43 AM

Page 72

Hold Don't place your handset down on the desk when you need your caller to wait, use Hold instead. Hold places your call in a temporary waiting state until you can get back to it. While the call waits, you can process calls or use other features. And don't worry if you forget about the call and leave it on Hold too long - it will recall back to you. Your telephone system provides four types of Hold (see the chart below). Your Communications Manager can tell you which types you can use. System Hold

For your normal calls . . . When you place an outside call on System Hold, it flashes your line key and the line keys on your co-worker's phones as well. Either you or another co-worker can pick up the call on Hold. Exclusive For high priority calls . . . Hold After you place an outside call on Exclusive Hold, it flashes your line key but looks busy to your coworkers. Only you can pick up the call from Hold. Group Hold Put calls on Hold for your Department Group . . . If you are a member of a Department Calling Group, you can use Group Hold. When you place an outside call on Group Hold, only you and the of your Department Calling Group can pick it up. Intercom Hold While talking to a co-worker . . . Intercom calls can also go on Hold. However, the Intercom call on Hold stays on your phone. Another extension cannot pick it up.

System Hold To place an outside 1. call on System Hold:

72

The or key flashes slowly while on Hold; flashes fast when recalling.

0893400_09.qxd

8/3/06

10:43 AM

Page 73

Hold To pick up an outside 1. Pressing flashing call on System Hold:

.

Exclusive Hold To place an outside 1. call on Exclusive Hold:

(Exclusive Hold). The key flashes fast while on Hold; flashes slowly when recalling.

To pick up an outside 1. Pressing flashing call on Exclusive Hold:

.

Group Hold To place a call on 1. Hold so anyone in up. your group can pick it up:

+

+

To pick up a call on 1. Group Hold:

+

.

To place an Intercom 1. call on Hold:

+

to hang up.

To pick up an 1. Intercom call from Hold:

+

.

to hang

Intercom Hold

73

0893400_09.qxd

8/3/06

10:43 AM

Page 74

Hotline When you need one-button calling and Transfer to a co-worker, use Hotline. You'll find Hotline to be a great convenience if there is someone in your company with whom you work closely (such as your business partner). You and your partner can call or Transfer calls to each other just by pressing a single key. Your Hotline key shows the status of your Partner's extension: When the key is . . .

Your partner's phone is . . .

Off On Fast Flash Double Wink On Wink Off

Idle Busy or ringing In Do Not Disturb ACD Agent logged into group ACD Agent logged off

To place a call to your 1. Hotline partner:

(Hotline). Optionally lift the handset.

(Hotline) + Announce call and To Transfer your out- 1. side call to your hang up. Hotline partner: OR (Hotline) + Hang up to have your call wait at your Hotline partner unannounced. If unanswered, the call recalls to you. To answer a call from 1. If you hear two beeps, speak toward the your Hotline partner: phone. OR If your telephone rings,

74

or

.

0893400_09.qxd

8/3/06

10:43 AM

Page 75

Intercom Call a co-worker over the Intercom. Normally, you are not restricted from placing an Intercom call to any other extension. However, if your telephone system is shared by several businesses, you may not be able to call the other business's extensions. Check with your Communications Manager. To place an Intercom 1. call:

+ Extension number. You can optionally dial 0 for your operator or *8 for your Voice Mailbox. If the extension you call is busy or doesn't answer, you can (without hanging up): - Dial another extension. - Dial 8 to leave a message in your co-worker's mailbox. For one-touch calling, see Hotline (page 74), Call Coverage (page 88) or One-Touch Keys (page 96) instead.

To answer an 1. If you hear two beeps, speak toward the Intercom call: phone. Your telephone picks up your voice. OR If your telephone rings, . Intercom calls you place may either ring or voice-announce at your co-worker's extension. What happens depends on how your co-worker's extension is set up. You can, however, dial a code to change from one method to the other. The Intercom calls you receive can also either ring or voice-announce. You decide the best way to answer your Intercom calls and then enable the option you want.

75

0893400_09.qxd

8/3/06

10:43 AM

Page 76

Intercom To change the mode 1. of an Intercom call If the call is ringing, this makes it you placed: voice-announce. If the call voiceannounces, this makes it ring. To make your incom- 1. ing Intercom calls up. voice-announce:

+

+

to hang

To make your incom- 1. ing Intercom calls up. ring:

+

+

to hang

Intercom Abandoned Call Display You can display a list of the Intercom calls placed to you while you were away from your phone. + . To display the list of 1. Press CALL2 repeatedly until no Intercom calls you did more calls display. not answer: 2.

76

to return to the normal Time and Date display.

0893400_09.qxd

8/3/06

10:43 AM

Page 77

Last Number Redial Instead of dialing a busy or unanswered outside call again, quickly redial it with Last Number Redial. Last Number Redial stores the last 10 outside call you placed in memory so you can easily recall it. The stored number can be up to 24 digits long, using 0-9, # or *. You can also quickly redial your last call using Repeat Redial (page 119) and Save Number Dialed (page 123). To redial your last 1. call:

+ + call placed on line selected. For i-Series phones, press LINE + LND + #. OR + + system selects line. For i-Series phones, press CALL1 + #5. OR + or to scroll + . If you don't press a line key after the Volume keys, the system automatically selects a trunk from the same group as your original call. For i-Series phones, press LND + LND to scroll to number, then press # or CALL1. OR + . The system automatically selects a trunk from the same group as your original call.

1. To check the stored number:

The stored number displays for six seconds. The stored number dials out if you: - Lift the handset - Press an idle line key - Press an idle CALL key, or - Press SPK

2.

77

0893400_09.qxd

8/3/06

10:43 AM

Page 78

Last Number Redial + To erase the stored 1. To clear all numbers, numbers: . Or, to select to delete one or all by + display the number to be deleted using

78

or

+

DEL

+

One

or

All

.

0893400_09.qxd

8/3/06

10:43 AM

Page 79

Line Preference Line Preference determines how you place and answer calls. There are two types of Line Preference: Incoming Line Preference and Outgoing Line Preference. Ask your Communications Manager which type you have. Incoming Line Preference

Incoming Line Preference sets how you answer calls. When a call rings your phone, lifting the handset answers either the ringing call (Ringing Line Preference) or seizes an idle line (Idle Line Preference). If you primarily answer calls and seldom place calls, Ringing Line Preference is for you. If you normally place calls and seldom answer them, then Idle Line Preference is for you.

Outgoing Line Preference

Outgoing Line Preference sets how you place calls. With Outgoing Intercom Line Preference, you hear Intercom dial tone when you lift the handset. With Outgoing Trunk Line Preference, you get dial tone on an outside line when you lift the handset. If you normally call co-workers, use Outgoing Intercom Line Preference. If you frequently call outside your company, use Outgoing Trunk Line Preference. If you have Incoming Idle Line Preference, Outgoing Line Preference also determines how your phone works as a call rings.

79

0893400_09.qxd

8/3/06

10:43 AM

Page 80

Meet Me Conference Use Meet Me Conference to have a telephone meeting which lets others if they choose. After you announce the Meet Me Conference over the Paging, a co-worker s the meeting by dialing the Meet Me Conference code. There are two types of Meet Me Conference: Meet Me External Conference and Meet Me Internal Conference. With Meet Me External Conference, announce the meeting with External Paging. With Meet Me Internal Conference, announce the meeting with Internal Paging. The system allows either four or eight parties maximum per Meet Me Conference. In addition to Meet Me Conference, there are other ways to have a telephone meeting. See Conference (page 47), Voice Call Conference (page 48), Meet Me Paging (page 82) and Tandem Trunking (page 132).

Meet Me External Conference . To make a Meet Me 1. While on a call, press External Conference: 2. + External Paging zone (1-8 or 0 for All Call). OR (External Paging). You can optionally press CALL1 and dial combined zones *10 to *18 instead. See Paging on page 106 for more on combined zones. 3. Announce the zone. 4.

twice when co-worker answers your page. 5. Repeat steps 1-4 for each co-worker you want to add.

80

0893400_09.qxd

8/3/06

10:43 AM

Page 81

Meet Me Conference + + External To a Meet Me 1. External Conference: Paging zone (1-8 or 0 for All Call). You connect to the other parties.

Meet Me Internal Conference . To make a Meet Me 1. While on a call, Internal Conference: 2. + Internal Paging zone (0-9 or 00-64). OR (Internal Paging). You can optionally press CALL1 and dial combined zones *10 to *18 instead. See Paging on page 106 for more on combined zones. 3. Announce the call. 4.

twice when co-worker answers your page. 5. Repeat steps 1-4 for each co-worker you want to add. + To a Meet Me 1. is in the zone called). Internal Conference: OR

(if your phone

+ + Zone (0-9 or 00-64) (if your phone is not in the zone called). OR (Internal Paging Zone Answer) (if your phone is in the zone called). 81

0893400_09.qxd

8/3/06

10:43 AM

Page 82

Meet Me Paging Need to talk to a co-worker and don't know where they are? Meet Me Paging allows you to set up a private meeting on a Page zone. While you meet on the zone, no one else can hear your conversation, in or make an announcement using that zone. There are two types of Meet Me Paging: Meet Me External Paging and Meet Me Internal Paging. With Meet Me External Paging, you hold the meeting on an External Paging zone. With Meet Me Internal Paging, you hold the meeting on an Internal Paging zone. In addition to Meet Me Paging, there are other ways to have a telephone meeting. See Conference (page 47), Voice Call Conference (page 48), Meet Me Conference (page 80) and Tandem Trunking (page 132).

Meet Me External Paging + + External To make a Meet Me 1. External Page: Paging zone (1-8 or 0 for All Call). OR (External Paging Zone). 2. Announce the zone. You can optionally press CALL1 and dial combined zones *10 to *18 instead. See Paging on page 106 for more on combined zones. + + External To a Meet Me 1. External Page: Paging zone (1-8 or 0 for All Call). You connect to the other party.

82

0893400_09.qxd

8/3/06

10:43 AM

Page 83

Meet Me Paging Meet Me Internal Paging + + Internal To make a Meet Me 1. Internal Page: Paging zone (0-9 or 00-64). OR (Internal Paging Zone). You can optionally press CALL1 and dial combined zones *10 to *18 instead. See Paging on page 106 for more on combined zones. 2. Announce the zone. + To a Meet Me 1. Internal Page: is in the zone called). OR

(if your phone

(Internal Paging Zone Answer) (if your phone is in the zone called). OR + (if your phone is not in the zone called).

83

0893400_09.qxd

8/3/06

10:43 AM

Page 84

Memo Dial While on an outside call, use Memo Dial to jot a number down in your phone's memory. Memo Dial is like a notepad. For example, if you dial Directory Assistance and ask for a number, you can use Memo Dial to it. You can then quickly call the stored Memo Dial number after you hang up. (Memo Dial) + Dial number you To store a number 1. while on a call: want to store + (Memo Dial). Continue with conversation. 2.

to hang up when you are done.

To call a stored Memo 1. Do not lift the handset + Dial number: Dial).

(Memo

2. The stored number dials out only if you store a trunk access code before the number. OR The stored number dials out. (Memo To check the stored 1. Do not lift the handset + Memo Dial number: Dial). The stored number displays. To erase the stored 1. Memo Dial number: 2.

84

+

(Memo Dial).

to hang up when you are done.

0893400_09.qxd

8/3/06

10:43 AM

Page 85

Message Waiting Don't keep recalling a busy or unanswered co-worker. Leave them a Message Waiting request for a return call instead. The request is a flashing lamp at the extension you call and a steadily lit lamp on your phone. When your co-worker answers the Message Waiting, they automatically call your extension. And if someone leaves you a Message Waiting, you'll know you didn't miss their call. In addition, Message Waiting lets you: G View and selectively answer messages left at your display extension. G Cancel messages left at your extension. G Cancel messages you left at other extensions. You can leave messages at any number of extensions simultaneously. Also, any number of co-workers can leave you a message at the same time. To leave a Message 1. Call busy or unanswered extension. Waiting: 2. or (Message Waiting). 3.

to hang up. Your MW lights.

To answer a Message When you have a Message Waiting, MW Waiting: flashes fast (the color is based on system programming). 1.

+ OR

.

+ (Message Waiting). If the called extension doesn't answer, dial 0 or press (Message Waiting) to leave them a message. 85

0893400_09.qxd

8/3/06

10:43 AM

Page 86

Message Waiting To display/check your These are the messages co-workers left at Messages Waiting list: your extension. The messages left first display first. 1.

+ + or to scroll through your messages. Press your Message Waiting key or CALL1 to call the displayed extension.

2.

to return to the Time and Date display. OR 1. (Message Waiting). 2.

or to scroll through your messages. Press your Message Waiting key or CALL1 to call the displayed extension.

To cancel all your This includes messages you have left for Messages Waiting: other extensions and messages other extensions left for you. 1.

+

2.

to hang up.

To cancel messages 1. you left at an extension: 2.

86

+ to hang up.

.

+ Extension.

0893400_09.qxd

8/3/06

10:43 AM

Page 87

Microphone Cutoff Turn your telephone's Handsfree and handset microphone off when you don't want your caller to hear your voice. When you turn your Handsfree or handset microphone off, it stays off until you choose to turn it back on. To turn your 1. This turns your Handsfree microHandsfree microphone off. You can press this key anyphone off and on: time while your phone is idle, busy on a call or ringing. OR

This turns your Handsfree microphone back on. (Microphone Cutoff). To turn your 1. You hear confirmation beeps. Your Handsfree and handmic is off when the key is lit. set microphone off You can press this key anytime while and on: on an outside call. For Intercom calls, you can only press this key when the coworker you call lifts the handset or presses

to answer.

87

0893400_09.qxd

8/3/06

10:43 AM

Page 88

Multiple Directory Numbers/Call Coverage Multiple Directory Numbers Multiple Directory Numbers allow you to have more than one extension number. In addition to your "normal" extension number (e.g., 320), you can have additional "virtual" extension numbers on Multiple Directory Number function keys. For example, you can have virtual extension number 600 for your sales calls. When a call routes to 600, it goes to your Multiple Directory Number key assigned to virtual extension 600. In this way, you can easily tell calls to your extension from sales-specific calls. Check with your Communications Manager to see if you have any Multiple Directory Number keys.

Call Coverage Use a Multiple Directory Number key assigned to a co-worker's extension when you need Call Coverage for their calls. The Multiple Directory Number key shows you when your co-worker is busy and flashes slowly when they have an incoming call. You can even press the key to intercept the incoming call.

Place and Receive Calls on Call Coverage/Multiple Directory Number Keys Multiple Directory Number keys/Call Coverage keys can be used three separate ways, depending on how the key is set up in system programming. G a DSS key to the extension and for receiving incoming calls G answering incoming calls with the ability to place outgoing ICM or CO calls OR G just for receiving incoming calls You can have Multiple Directory Number keys for many different extensions and virtual extensions. In addition, you and other co-workers can share the same Multiple Directory Number keys. For example, everyone in your department could have a key for the sales virtual extension. Your Multiple Directory Number keys can ring or not ring. Your Communications Manager can tell you how your keys are set up.

88

0893400_09.qxd

8/3/06

10:43 AM

Page 89

Multiple Directory Numbers/Call Coverage To answer a call 1. Press flashing ringing your Multiple Directory Number). Directory Number/Call Coverage key: To place a call to a 1. Multiple Directory Number: 2.

(Multiple

(Multiple Directory Number). OR Dial virtual extension number.

89

0893400_09.qxd

8/3/06

10:43 AM

Page 90

Music on Hold When you place a call on Hold or in a Park orbit, Music on Hold (MOH) can be provided to the caller so they know their call is waiting. Without Music on Hold, the caller only hears silence. The Music on Hold source can be from a customer-provided source or it can be an internal (synthesized) selection provided by the system. When the internal source is used, you can choose from 3 difference options: 00 = No tone/music 01 = General music 02 = Holiday music This option should be used only by the system . When changing the internal music source with this option, you are changing the selection for everyone on the phone system.

+ . To change the internal 1. Music on Hold 2. Enter the code for the desired selection: selection: 00, 01, or 02. You hear the MOH selected. 3.

90

to hang up.

0893400_09.qxd

8/3/06

10:43 AM

Page 91

Name Storing You can program a name for your extension. The name can be up to 12 digits long. When you call a co-worker that has a display telephone, they see your name instead of your extension number. Your co-worker knows who's calling without having to look up your extension number. Use the following chart when entering or editing your name. When using the One-Touch (DSS) keys, press the key once for the first character, twice for the second character, etc. For example, to enter a C, press DSS1 three times. Use this keypad digit . . . 1 2 3 4 5 6 7 8 9 0 * # CONF CLEAR

When you want to. . . Enter characters: 1 @ [ ¥ ] ^ _ ` { | } → ← Á À Â Ã Ç É Ê ì ó Enter characters A-C, a-c, 2. Enter characters D-F, d-f, 3. Enter characters G-I, g-i, 4. Enter characters J-L, j-l, 5. Enter characters M-O, m-o, 6. Enter characters P-S, p-s, 7. Enter characters T-V, t-v, 8. Enter characters W-Z, w-z, 9. Enter characters: 0 ! “ # $ % & ’ ( ) ô Õ ú ä ö ü α ε θ Enter characters: * + , - . / : ; < = > ? π ∑ σ Ω ∞ ¢ £ # = Accepts an entry (only required if two letters on the same key are needed - ex: TOM). Pressing # again = Space. Clear the character entry one character at a time. Clear all the entries from the point of the flashing cursor and to the right.

+ + Dial your To program your 1. extension's name: extension number + Enter name (see the chart above). Your name can be up to 12 digits long. 2.

. You hear confirmation beeps.

3.

to hang up. This feature may be restricted for some s. 91

0893400_09.qxd

8/3/06

10:43 AM

Page 92

Night Service You may be able to activate Night Service for your system. Used after normal working hours, Night Service redirects your system's incoming calls to where they should ring at night. For example, when most of your co-workers have left for home, your system may redirect calls to the security desk. When you activate Night Service, select one of eight modes of operation: G Day Mode - normal working hours. G Night Mode - after hours (usually evening). G Midnight Mode - late at night to early in the morning. G Rest Mode - lunch and early evening (dinner time). G Day Mode 2 - normal working hours. G Night Mode 2 - after hours (usually evening). G Midnight Mode 2 - late at night to early in the morning. G Rest Mode 2 - lunch and early evening (dinner time). There are two types of Night Service ringing for outside calls: Assigned Night Answer (ANA) and Universal Night Answer (UNA). With ANA, specific telephones are programmed to ring at night (like the security desk in the example above). UNA causes incoming calls to ring over the External Paging speakers. If your extension has a line key for the call, just press the line key to pick up the UNA call. In addition, you may be able to dial the Universal Answer Code to pick up calls for which you don't have line keys. Your system may switch Night Service modes automatically. Check with your Communications Manager if this happens, and when the switch-over occurs.

92

0893400_09.qxd

8/3/06

10:43 AM

Page 93

Night Service + + Night Service To activate Night 1. Service by dialing . codes: 2. Dial the Night Service Mode: 1= Day Mode, 2 = Night Mode, 3 = Midnight Mode, 4 = Rest Mode, 5= Day 2 Mode, 6 = Night 2 Mode, 7 = Midnight 2 Mode, 8 = Rest 2 Mode You hear confirmation beeps. 3.

to hang up.

(Night Service). To activate Night 1. You hear a beep and the key lights to Service using proindicate the mode selected: grammable keys: Day Mode Key Night Mode Key Midnight Mode Key Rest Mode Key Day 2 Mode Key Night 2 Mode Key Midnight 2 Mode Key Rest 2 Mode Key To use Universal 1. Answer to pick up a UNA call:

+ . You are connected to the call.

93

0893400_09.qxd

8/3/06

10:43 AM

Page 94

Off Hook Signaling Trying to get in touch with a co-worker who is busy on a handset call? Use Off Hook Signaling to let your co-worker know you're trying to get through. The off hook signal you send to your co-worker is ringing over their idle (second) line appearance or through their speaker, depending on system programming. Your phone system provides four Off Hook Signaling options (see the chart below). Ask your Communications Manager which options you have. Automatic Signaling

Calling a busy extension automatically initiates Off Hook Signaling. You'll find this option helpful if you are someone that must quickly process calls (such as a receptionist or operator). Manual After reaching a busy extension, manual Signaling signaling gives you the choice of using Off Hook Signaling or activating another feature. If you don't have Automatic Signaling, you have Manual Signaling. Selectable Off If your extension has Handsfree, you can have Hook Signaling Off Hook Signaling ring your phone's second Mode channel or voice announce - at your discretion. There are four types of Off Hook Signaling rings you can receive (ask your Communications Manager): - Muted off hook ringing - Normal off hook ringing - Two beeps over the speaker - One beep in the handset Called Your extension may block Off Hook Signaling Extension from other extensions. Use this option if you Block don't like to be interrupted while on a call.

94

0893400_09.qxd

8/3/06

10:43 AM

Page 95

Off Hook Signaling Your co-worker receives Off Hook Signaling ring. They must first place their initial call on Hold before they can respond to you. They cannot just speak toward their phone. You can use other options when you are trying to get through. Use Call Waiting (page 27) to wait in line without hanging up. Or, you can leave a Callback request for a return call (page 28). If you want, send your co-worker a Message Waiting indication (page 85) or a Voice Mail message (page 142). You may also be able to Voice Over (page 146) to your busy co-worker while they stay on their initial call. To send Off Hook 1. Signals to an extension busy on a handset call:

OR (Off Hook Signaling).

95

0893400_09.qxd

8/3/06

10:43 AM

Page 96

One-Touch Calling Use your One-Touch Keys for one button access to co-workers, outside lines and selected system features. You'll find this a great time saver when calling the clients and co-workers you talk to most often. Instead of dialing the codes, just press the One-Touch Key. Your One-Touch Keys give you: G Direct Station Selection - One button access to your co-worker's extensions. G Personal Speed Dial (Outside Calling) - One button access to outside lines, line groups and telephone numbers. (You can also have Personal Speed Dial if your phone doesn't have One-Touch Keys - see page 99). G Abbreviated Dialing - One button access to Common and Group Abbreviated Dialing bins. G Service Codes - One button access to Servicec Codes (e.g., 2 for Callback). G Chain Dialing - Linking two or more One-Touch Keys for lengthy dialing scenarios. One-Touch Calling is the first level of operation on the One-Touch Keys. In other words, One-Touch Calling occurs when you just press the One-Touch Key. + + To program a One- 1. Touch Key for DSS want to program. (extension) calling: 2. Dial extension number you want

you

assigned to that key + . 3. Optional for Display Phones: Enter a name for the One-Touch key (see Name Storing on page 91) + 3.

96

to hang up.

.

0893400_09.qxd

8/3/06

10:43 AM

Page 97

One-Touch Calling + + you To program a One- 1. Touch Key for outside want to program. calling (Personal for Trunk Group Access code. Speed Dial): 2. OR + trunk number (01-200) for a specific trunk. OR + Trunk Group number (e.g., 1) for a Trunk Group. 3. Dial the number you want to call + . To enter a pause, press . 4. Optional for Display Phones: Enter a name for the One-Touch key (see Name Storing on page 91) + 5.

.

to hang up.

+ + you To program a One- 1. Touch Key for want to program. Abbreviated Dialing: 2. for Common or for Group Abbreviated Dialing. 3. Dial Abbreviated Dialing storage code (e.g., 001) + . 4. Optional for Display Phones: Enter a name for the One-Touch key (see Name Storing on page 91) + 5.

.

to hang up. 97

0893400_09.qxd

8/3/06

10:43 AM

Page 98

One-Touch Calling + + you To assign a Service 1. want to program. Code to a One-Touch Key: 2. Dial Service Code you want to store + . For example, store 2 to make a callback key. Refer to the features in this handbook for the appropriate Service Codes. Optional: Display phone s can enter a name + HOLD. 3. To use a One-Touch 1. Key:

to hang up.

If you press a line key before pressing a One-Touch Key for outside calling, the system automatically removes any stored trunk codes.

To chain the functions 1. Let the stored number dial out. of two One-Touch Keys: 2. Press another . The stored digits dial out. To check the function 1. of a One-Touch Key:

+ . The stored function displays. Repeat this step to check additional keys. If you cannot see the entire number stored, dial

2.

98

. .

0893400_09.qxd

8/3/06

10:43 AM

Page 99

One-Touch Calling To clear a One-Touch 1. Key:

+

+

+

. 2.

.

Using Personal Speed Dial without One-Touch Keys + . To program a Personal 1. Speed Dial number if 2. Dial a Personal Speed Dial bin number (1-9 or 0). your phone doesn't have One-Touch Keys: Bins 1-9 correspond to One-Touch Keys 1-9. Bin 0 corresponds to key 10. 3. Dial outside number you want to call. The bin should contain a trunk access code: 9, #9 + Trunk number or 804 + Trunk Group number. To enter a pause, press MIC. 4.

to hang up.

+ . To dial a Personal 1. Speed Dial number if 2. Dial a Personal Speed Dial bin number (1-9 or 0). your phone doesn't have One-Touch Keys: The stored number dials out.

99

0893400_09.qxd

8/3/06

10:43 AM

Page 100

Outside Calls, Answering There are many types of outside calls that you can answer from your phone. You can tell a lot about the call coming in by listening for ringing, watching your phone's keys and checking the display (if you have one). Also use the chart below as a guide. Ask your Communications Manager about the different types of calls you are expected to answer. You may have line and loop keys on your phone. A line key is dedicated to a particular outside line. When you press the line key to answer a call, you always get the same line. A loop key works just like a line key, except that it is for any line in a preset line group. When you press a loop key to answer a call, you get whichever line in the group happens to be ringing. For this type of call...

You hear...

And see...

Outside Call that rings Two quick rings flashing slowly your phone repeated (red) (If you have a line key for it) flashing slowly Direct Inward Line1 (If you have a line key for it)

Two quick rings repeated

flashing slowly (green) flashing slowly

Outside call or DIL that rings your phone (If you don't have a line key for it)

Two quick rings repeated

Outside call that just flashes a line key without ringing

No Ringing

100

flashing slowly

flashing slowly (red)

0893400_09.qxd

8/3/06

10:43 AM

Page 101

Outside Calls, Answering For this type of call... Transferred Call (If you have a line key for it)

You hear...

And see...

Two quick rings flashing slowly repeated (green) flashing fast

Transferred Call (If you don't have a line key for it) 1These

Two quick rings repeated

flashing fast

calls initially ring only at your phone.

To answer an outside 1. call:

or . Depending on how your phone is set up, you may answer the call automatically. You phone's Line Preference (page 79) determines what happens when you lift the handset or press SPK to answer a call.

2. Press flashing or . You may be able to dial #0 at night to pick up calls not ringing your phone.

101

0893400_09.qxd

8/3/06

10:43 AM

Page 102

Outside Calls, Placing Your phone offers you several ways to place outside calls. You can: G Press a line key for one-button access to a specific line. G Press a loop key for one-button access to the first available line in a line group. G Dial a code to select a specific line. G Dial a code to select the first available line in a line group. G Dial 9 to use Trunk Group Routing or Automatic Route Selection (ARS). The method you use depends on how your system and your phone are set up. For example, if you should use only ARS for outgoing calls, don't press line keys or dial up lines and line groups. On the other hand, if your office is set up like a "key system", you and your coworkers will have line keys for the same outside lines. Your Communications Manager can tell you which methods you should use for placing outside calls. To place an outside 1. call using a line key:

. You may have to press SPK or lift the handset before pressing the line key. The line key lights (green). 2. Listen for dial tone. 3. Dial number.

+ + Line number (001To dial a code to 1. select a specific line: 200). 2. Dial number. Check with your Communications Manager to see which lines you can use. + To dial a code to 1. select a line group: number.

102

+ Line group

0893400_09.qxd

8/3/06

10:43 AM

Page 103

Outside Calls, Placing To dial a code to a select line group (Cont’d)

Your line group numbers are 1-9, 0199 or 001-200. Ask your Communications Manager. 2. Dial number.

To use Trunk Group 1. Routing or ARS:

+ . The system automatically routes your call using ARS or Trunk Group Routing - whichever is installed.

Converting from Pulse to Tone Dialing If your company is in a Dial Pulse area, you may need to change the dialing mode of your phone to tone (DTMF) after you place your initial call. This allows you to use dial-up services like electronic banking or a client's Voice Mail. To change your dial- 1. Place outside call normally. Your call dials out as Dial Pulse. ing mode to DTMF: 2.

. The next digits you dial go out as DTMF. Instead of dialing #, the system may automatically convert to DTMF 10 seconds after you dial the last digit of your outside call.

Are You Behind a PBX? Your telephone system may be connected to a Private Branch Exchange (PBX) rather than to the telephone company's lines. This means that when you get dial tone on an outside line, you are really getting dial tone from the PBX. This may affect the way you place outside calls. For example: G After you press a line key, you may have to dial an additional access code (e.g., 9) before you can dial your outside number. 103

0893400_09.qxd

8/3/06

10:43 AM

Page 104

Outside Calls, Placing G G

G

The PBX may restrict you from placing certain types of calls. If you use Automatic Route Selection, your telephone system may automatically insert whatever codes the PBX requires. For example, when you dial 9 926 5400 for an outside call, your system may send 9 9 926 5400 to the PBX. You may be able to Transfer to and Conference with other systems connected to the same PBX.

Ask your Communication's Manager if you are behind a PBX.

You May Have a Private Line A Private Line is simply a line on your phone that nobody else in the system can use. Only you can place and answer calls on your Private Line. Your Communications Manager can tell you if you have a Private Line.

If You Hear a Warning Tone While on an outside call, you may hear occasional beeps through your speaker or handset. These tones remind you that you have been on the call a long time.

How Prime Line Works If you have Prime Line, you can place or answer a call on a specific line just by lifting the handset. With Outgoing Prime Line Preference, you get dial tone on your Prime Line when you lift the handset. This happens even if another call is ringing in. If you usually need to place calls, Outgoing Prime Line Preference may help you. With Incoming Prime Line Preference, lifting the handset answers a ringing call. If you want easy answering of incoming calls, Incoming Prime Line Preference may be for you. If Prime Line sounds helpful to you, your Communications Manager may be able to set it up.

104

0893400_09.qxd

8/3/06

10:43 AM

Page 105

Outside Calls, Placing Did Your Call Go Through? If you dial certain calls and you find that they do not go through, ask your Communications Manager the following questions: G Is my telephone Toll Restricted? If it is, what numbers am I prevented from dialing? G Can I override Toll Restriction? If so, what is my override code? If you need to over- 1. ride Toll Restriction: 2. G G

+

+ .

+ Dial number without restriction.

Do I need to enter Codes (page 14) for outside calls? Does my telephone use Automatic Route Selection? If it does, are there any numbers that I cannot dial?

105

0893400_09.qxd

8/3/06

10:43 AM

Page 106

Paging Internal Paging Need to locate a co-worker or make an announcement? Use Internal Paging. Your system can have All Call Internal Paging and, depending on your system, up to 64 zones of Internal Paging. When you make an All Call Paging announcement, your voice broadcasts to all extensions set to receive All Call Paging. When you make a Zone Paging announcement, your voice broadcasts to all the idle extensions in the zone you called. To make an Internal 1. Page:

(Internal Paging). OR

+ + Zone. Internal Paging zones are 0-9 or 0064 (0 and 00 are All Call Internal Paging). 2. Make announcement + to hang up.

External Paging If you have your own external speaker system installed, you may be able to use it for External Paging. This is particularly helpful in large or noisy areas where the Internal Paging speakers in the telephones are not loud enough. Your system can have All Call External Paging and up to 8 zones of External Zone Paging. To make an External 1. Page:

(External Paging). OR + + Zone. External Paging zones are 0-8, where 0 is All Call External Paging.

2. Make announcement +

106

to hang up.

0893400_09.qxd

8/3/06

10:43 AM

Page 107

Paging Combined Paging Use Combined Paging when you want to simultaneously Page into an internal and corresponding external zone. For example, you can Page your company's warehouse and outside loading dock at the same time. Combined Paging is available for Paging groups 1-9 and All Call. + To make a Combined 1. Page: zone. OR

+ Combined Paging

(All Call External Page). Combined Paging zones are 1-8 or 0 (for internal/external All Call). 2. Make Announcement. 3.

to hang up.

107

0893400_09.qxd

8/3/06

10:43 AM

Page 108

Park Have a call for a co-worker and can't find them? Put their call in a waiting state called Park so they can pick it up. After you Park the call, Page the co-worker you want to receive the call and hang up. When your co-worker hears the Page, they dial the orbit or press a Park key to pick up the call. There are two types of Park: System and Personal. Use System Park when you want to have the call wait in a system orbit. (There can be up to 64 system orbits, depending on your system) Personal Park allows you to Park a call at your extension so a co-worker can pick it up. To Park a call in a 1. Do not hang up. system orbit: 2. (Park). OR + + Park Orbit. Park Orbits are 01-64. If you hear busy, the orbit is busy. Try another orbit. 3. Page your co-worker to pick up the call. 4.

to hang up. If not picked up, the call will recall to you.

To pick up a parked You can only pick up a call parked by a call from a system member of your own Park group. orbit: 1. + (Park). OR +

108

+ Park Orbit.

0893400_09.qxd

8/3/06

10:43 AM

Page 109

Park To Park a call at your 1. Do not hang up. extension: 2. +

or

(Personal Park). 3. Page your co-worker to pick up the call. 4.

to hang up. If not picked up, the call will recall to you.

To pick up a call If parked at your extension: parked at an exten+ or sion (yours or a co- 1. worker's): (Personal Park. OR If parked at a co-worker's extension: 1.

+ extension.

+ Co-worker's

(Park). To display Caller ID 1. Do not lift the handset + If Automatic Handsfree is enabled, for calls in Park: press FLASH then the PARK key.

109

0893400_09.qxd

8/3/06

10:43 AM

Page 110

Park and Page (VRS)

This feature requires the Voice Response System (VRS) provided by the DSP daughter board (DSPDB).

When you are away from your phone, Park and Page can let you know when you have a call waiting to be answered. To enable Park and Page, you record a Personal Greeting along with an additional Paging announcement. Your callers hear your Personal Greeting and automatically wait at your phone. The system then broadcasts your prerecorded Paging announcement. You can go to any co-worker's phone and pick up your waiting call. For example, you could record a Personal Greeting that says, "Hello. I am away from my phone right now but please hold on while I am automatically paged." Your Paging announcement could say, "(your name), you have a call waiting on your line." Your caller hears your Personal Greeting - and you hear the Paging broadcast. To have the system 1. Page you when you have a call: 1. 2.

+ OR

. (Call Forward to Device).

+ When you hear, "Please start recording", record your Personal Greeting. If you already have Park and Page or Personal Greeting set up, you can dial: 7 to re-record 5 to listen (then # to listen again) 3 to erase (then optionally HOLD to cancel the erase)

3. . 4. When you hear, "Please start recording", record your Page. 110

0893400_09.qxd

8/3/06

10:43 AM

Page 111

Park and Page (VRS) + Dial Page Zone that should To have the system 5. Page you when you broadcast your announcement. For example, for Internal Zone 1 dial have a call 801 + 1. Or, for Combined Paging Zone (Cont’d): 1, dial *1 + 1. 6. Dial Park and Page type: 2 = All calls 3 = Outside calls only 7.

to hang up when you are done. Your DND or Call Forwarding (Device) Programmable Function Key flashes when Call Forwarding is activated.

+ To pickup up your 1. Park and Page: number. To cancel your Park 1. and Page: 2.

+

+ Your extension

+

.

to hang up when you are done.

111

0893400_09.qxd

8/3/06

10:43 AM

Page 112

Personal Greeting

This feature requires the Voice Response System (VRS) provided by the DSP daughter board (DSPDB).

Use Personal Greeting to forward your calls and automatically play a recorded message to your callers. This lets you add a personal touch to your Call Forwards. For example, you can record, "Hi, this is (your name). I'll be out of the office today. In my absence, Mary Jones can answer all your questions. Please hold on for Mary." Your callers hear this message and then are forwarded to Mary Jones' phone. To activate Personal 1. Greeting for your phone: 1. 2.

3.

+ OR

. (Call Forward to Device).

+ When you hear, "Please start recording," record your Personal Greeting. If you already have Personal Greeting or Park and Page set up, you can dial: 7 to re-record 5 to listen (then # to listen again) 3 to erase (then optionally HOLD to cancel the erase)

+ Personal Greeting condition: 2 = Busy or not answered 4 = Immediate 6 = Not answered 3 = Cancel 4. Dial the destination to receive your calls. The destination can be: G A co-worker's extension. G Your Voice Mailbox (by dialing the Voice Mail master number). 112

0893400_09.qxd

8/3/06

10:43 AM

Page 113

Personal Greeting To activate Personal Greeting for your phone (Cont’d):

Off-premise via Common Abbreviated Dialing (by entering #2 + bin). G Greeting without forwarding so caller hears busy (by entering your extension number). You cannot forward to a Department Group pilot number. 5. Dial Personal Greeting type: 2 = All calls 3 = Outside calls only G

6.

To cancel your 1. Personal Greeting: 2.

to hang up. Your DND or Call Forwarding (Device) Programmable Function Key flashes when Call Forwarding is activated. +

+

.

to hang up when you are done.

113

0893400_09.qxd

8/3/06

10:43 AM

Page 114

Programmable Function Keys Customize your phone by storing features or outside lines under your Programmable Function Keys. For example, to return a Message Waiting, just press your Message Waiting function key instead of dialing

.

+ + you To program a function 1. key: want to program. 2. Select the 2-digit key code from the following chart. OR 1.

+ + you want to program. 2. Select the 3-digit key code (*xx) from the following chart. A key previously programmed with 3 digits (*xx) must first be undefined before it can be programmed with a 2digit code using the 851 service code. To check a stored 1. function:

+ you want to check. The programmed function displays.

To clear a stored 1. If programmed with a 2-digit code: function: + + you want to clear. 2. Dial 00 or 000 if programmed with a *xx code. OR 1. If programmed with a 3-digit code (*xx): + + you want to clear. 2. Dial 00 if programmed with a 2-digit code or 000 if programmed with a *xx code. 114

0893400_09.qxd

8/3/06

10:43 AM

Page 115

Programmable Function Keys Programmable Function Key Codes For this feature Abbreviated Dialing

Use key code 27 28

Barge In

34

Call Forwarding Call Forwarding Off-Premise Call Forwarding / Do Not Disturb Override Call Redirect

16 17

When you are

Or dial

Dialing a stored Common #2 + bin Abbreviated Dialing number Dialing a stored Group #4 + bin Abbreviated Dialing number Barging In on a co-worker's conversation Forwarding your calls (station) *2 Forwarding your calls (device) *4

37

Overriding an extension's Call Forwarding or Do Not Disturb 49 + Redirecting an incoming call Dest. Ext. Callback / Camp On / 35 Leaving a Callback request at a 2 Trunk Queuing busy extension, Camping On to a busy extension, or Queuing for a busy trunk Caller ID Log History 08 Checking incoming Caller ID history Central Office Calls 0001- Pressing a line key to place or #9 0200 answer a trunk call (where trunks can range from 0001-0200) *05 + Pressing a loop key to place or Type + answer a call. Type = 0 Group (Incoming), 1 (Outgoing) or 2 (Both ways), Group = 000 (All groups in or ARS out) or 001-100 (Trunk Group) Conference 07 Setting up a Conference or a #1 Meet Me Conference Conference, Voice Call 32 Setting up a Voice Call Conference Data Communications 66 Placing a data call -

115

0893400_09.qxd

8/3/06

10:43 AM

Page 116

Programmable Function Keys Programmable Function Key Codes For this feature Department Step Calling Group Call Pickup

Hotline

Headset Operation Hold

Meet Me Conference and Meet Me Paging Memo Dial Message Waiting Microphone Cutoff Multiple Directory Numbers

116

Use key code 36

When you are

Or dial

Step Calling through a Department # Group for an idle member 24 Answering a call ringing another *# phone in your Pickup Group 25 Answering a call ringing a phone 869 in another Pickup Group-if you don't know the group number 26 + Answering a call ringing a phone 868 Group in a specific Pickup Group Number 01 + Placing a call to your Hotline ext. partner number + Hold 05 Enabling or disabling Headset Operation 44 Putting a call on System Hold (if your phone's Hold key is reassigned) 45 Putting a call on Exclusive Hold 23 ing a Meet Me Conference 863 or Page 31 Storing, using or checking a Memo Dial number 38 Leaving or answering a Message 0 or Waiting *0 40 Using Microphone Cutoff *03 + Placing a call or covering your ext. + virtual (phantom) extension / Call Hold + Coverage Mode # (Set modes for immediate and delayed Hold + ringing.) Mode #

0893400_09.qxd

8/3/06

10:43 AM

Page 117

Programmable Function Keys Programmable Function Key Codes For this feature Night Service

Off Hook Signaling Paging, External

Paging, Internal

Park

Personal Park Repeat Redial

Use key code 09 + mode mode

When you are Toggle thru modes = 0 Activating the Night Mode = 1 Activating the Night Mode = 2 Activating the Midnight Mode =3 Activating the Rest Mode = 4 Activating the Day 2 Mode = 5 Activating the Night 2 Mode = 6 Activating the Midnight 2 Mode = 7 Activating the Rest 2 Mode = 8 Signaling a busy extension Making an external zone page

Or dial 818 + 0 818 + 1 818 + 2 818 + 3 818 + 4 818 + 5 818 + 6 818 + 7

818 + 8 7 803 + zone Making a Combined All Call 803 page +0 21 + Broadcasting to an Internal 801 zone Paging Zone + zone 22 Broadcasting an Internal All 801 + Call Page 0 or 00 *04 + Placing a call into or retrieving #6 orbit a call from a Park Orbit (Park) (1-9 or *6 01-64) (Pickup) *07 Placing a call into a personal 857 Park Orbit 29 Activating Repeat Redial DIAL + LND 33 19 + zone 20

117

0893400_09.qxd

8/3/06

10:43 AM

Page 118

Programmable Function Keys Programmable Function Key Codes For this feature Reverse Voice Over

Use key code

When you are

Or dial

47 + Initiating Reverse Voice Over dest. ext. Room Monitor 39 Activating room Monitor Save Number Dialed 30 Saving, redialing or checking a saved number Secretary Call (Buzzer) 41 + Calling your secretary (using the sec. ext. buzzer) Secretary Call Pickup 42 + Activating Secretary Call Pickup boss ext. Selectable Display 17 Forwarding your calls (device) *4 Messaging (message # is determined when set) 18 Forwarding your calls (device) *4 (displaying a pre-determined message) Serial Call 43 Placing a Serial Call to a co-worker Tandem Ringing 80 Setting Tandem Ringing Transfer 06 Transferring a call (if CONF[TRF] is not set for Transfer) Trunk Group Routing *05 Accessing a trunk using Trunk Group Routing Trunk Groups *02 + Accessing a Trunk Group 804 group (Groups are 1-9, 01-99 or 001-100) Trunk Queuing 35 Camping On or Queuing for a 2 trunk17 VRS Park and 1081 Forwarding your calls (device) *4 Page/Personal Greeting Voice Mail 77 + Calling Voice Mail or leaving *8 or 8 ext. a message 78 Using Voice Mail Record Voice Over 48 Initiating to Voice Over 6 48 Responding to Voice Over -

118

0893400_09.qxd

8/3/06

10:43 AM

Page 119

Repeat Redial Trying to get in touch with a customer and their phone is always busy or unanswered? Don't keep redialing it manually - have Repeat Redial do it for you. Repeat Redial will retry your call automatically (up to 255 times) so you can go back to work. You can also quickly redial your last call using Last Number Redial (page 77) and Save Number Dialed (page 123). To use Repeat Redial: 1. Place outside call. Listen for busy or no answer. 2.

+ OR

.

(Repeat Redial). Your Repeat Redial key flashes while you wait for the system to redial. 3.

to hang up. Your phone periodically redials the call.

4.

or answers.

when party you call

To cancel Repeat 1. Do not lift handset. Redial: 2. + . OR (Repeat Redial). Lifting the handset during a callout cycle will also cancel Repeat Redial.

119

0893400_09.qxd

8/3/06

10:43 AM

Page 120

Reverse Voice Over While you are busy on a handset call, Reverse Voice Over allows you to make a private Intercom call to an idle co-worker. Just press your Reverse Voice Over function key to call your co-worker. Your initial caller cannot hear your voice, but you can keep talking to your coworker as long as you hold down your key. Reverse Voice Over is great, for example, if you're busy on the phone and you need an associate to get you a file. While your caller is talking: G Press the Reverse Voice Over key. G Request the file. G Return to the call without the caller even knowing you were gone. If you're not busy on the phone, your Reverse Voice Over key works the same as a Hotline key. Just press the key to call the assigned co-worker. The Reverse Voice Over key even shows you the status of your co-worker: When the key is . . . Off On Steady Fast Flash

Your co-worker's phone is . . . Idle Busy or has a call ringing In Do Not Disturb

When You're On a Call (Reverse Voice To place a Reverse 1. Press and hold Voice Over Call: Over). Your Reverse Voice Over key lights (green). To return to your 1. Release initial caller:

(Reverse Voice Over).

When Your Phone is Idle (Reverse Voice Over). To place a call to your 1. You can optionally lift the handset for Reverse Voice Over privacy. destination: 120

0893400_09.qxd

8/3/06

10:43 AM

Page 121

Ringdown Call a co-worker or outside party by just lifting the handset on your telephone. The call goes through automatically - there is no need to dial digits or lift the handset. There are two types of Ringdown: Ringdown Extension and External Hotline. With Ringdown Extension, you reach another extension (typically a lobby or service phone) when you lift the handset. If your phone has External Hotline, your phone automatically dials a specified Common Abbreviated Dialing number instead. If you want either of these Ringdown options on your phone, talk to your Communications Manager. When a lifts the handset on a Ringdown Extension, the ringdown occurs after an interval that is set in system programming. Try to monitor this operation. If the interval is too long, unauthorized s may have time to call your co-workers or use system features. (External Hotline always occurs as soon as you lift the handset.) To use Ringdown: 1. To by Ringdown 1. Do not lift handset. (for Ringdown + Place Intercom or outside call. Extension only): 2. OR Press OR

for outside call +

+ Place Intercom call before Ringdown goes through. To answer a call if you 1. Speak toward your phone if the call are a Ringdown voice-announces. Destination: OR if call rings. 121

0893400_09.qxd

8/3/06

10:43 AM

Page 122

Room Monitor Use Room Monitor when you want to listen to the sounds in another work area. For example, Room Monitor could let you listen to the sounds in the warehouse when it's left unattended. You just set up a Room Monitor with a phone in the warehouse area. You must activate Room Monitor at your phone and at the phone you want to monitor. You can only monitor one phone at a time. In addition, Room Monitor is for listening only (i.e., you cannot talk to the monitored extension). . To activate Room 1. Do not lift handset or press Monitor (at your own (Room Monitor) + Extension phone): 2. you want to monitor. The Room Monitor key flashes. . To activate Room 1. Do not lift handset or press Monitor (at the phone (Room Monitor) + Your own you want to monitor): 2. extension number. The Room Monitor key flashes. To cancel Room 1. Monitor (at both phones):

122

(Room Monitor). The Room Monitor key goes out. If the monitored phone is left active, the feature can be reactivated by the monitoring phone by simply pressing the Room Monitor key and dialing the extension number.

0893400_09.qxd

8/3/06

10:43 AM

Page 123

Save Number Dialed While on an outside call, you can save the number you just dialed and easily dial it later. This lets you quickly redial a busy or unanswered number without manually dialing any digits. Your system re your saved number until you save a new one in its place. You can also quickly redial your last call using Last Number Redial (page 77) and Repeat Redial (page 119). To save the outside Use the following procedure before number you just hanging up. dialed: 1. (Save Number Dialed). The number you save can be up to 24 digits long, using 0-9, # and *. To redial a Saved 1. Number:

+ (Save Number Dialed). This selects a specific line for the call. The stored number dials out. OR

1. 2.

. OR (Save Number Dialed). Save Number Dialed selects a line from the same group as your original call. The stored number dials out.

123

0893400_09.qxd

8/3/06

10:43 AM

Page 124

Save Number Dialed To see the number 1. you saved:

(Save Number Dialed). The stored number displays for six seconds. The stored number dials out if you: - Lift the handset - Press an idle line key - Press an idle CALL key - Press SPK

2. To clear your saved 1. number: up.

124

+

+

to hang

0893400_09.qxd

8/3/06

10:43 AM

Page 125

Secretary Call Secretary Call Buzzer lets you alert a co-worker without disturbing their work. They can then call you on the Intercom when it's convenient. To use this feature, both you and your co-worker must have Secretary Call Buzzer keys. When you press your buzzer key, your coworker phone rings and their buzzer key starts to flash. Your own buzzer key lights. The buzzer keys continue to indicate until you or your co-worker cancels the feature. You might want to use this feature, for example, if you need to talk to an associate who is having a meeting in their office. After being alerted, your associate can call you back when they're available. You can have Secretary Call Buzzer keys for many extensions. To buzz your 1. Do not lift the handset. (Secretary Call Buzzer). secretary or boss: 2. Your boss or secretary hears ringing. Your buzzer key lights steadily. Your boss or secretary's buzzer key flashes fast. 3. Press the buzzer key to stop the ringing. To check to see who 1. Do not lift the handset. left you a Secretary + (Secretary Call Buzzer). Call: 2. 3. To answer your 1. Place an Intercom call to the extension Secretary Call that called you. indication:

125

0893400_09.qxd

8/3/06

10:43 AM

Page 126

Secretary Call (Secretary Call Buzzer). To cancel a Secretary 1. Press lit Both the boss and secretary buzzer Call you left at keys go out. another extension: To cancel a Secretary 1. Do not lift your handset. Call left at your 2. Press flashing (Secretary Call extension: Buzzer). Both the boss and secretary buzzer keys go out.

Secretary Call Pickup Press your Secretary Call Pickup key to have calls intended for a coworker go to you instead. This gives you a simplified type of Call Forwarding for an associate with whom you work closely. For example, if you and a co-worker handle all your company's service calls, Secretary Call Pickup lets you easily answer your co-worker's calls if they leave their desk. You can have Secretary Call Pickup keys for many extensions. To activate Secretary 1. Call Pickup:

(Secretary Call Pickup). You hear a beep and your key lights.

(Secretary Call Pickup). To cancel Secretary 1. Press lit You hear a beep and your key goes Call Pickup: out. To check the 1. Secretary Call key assignment: 2.

126

+

(Secretary Call Pickup).

0893400_09.qxd

8/3/06

10:43 AM

Page 127

Secure Set Relocation Need to swap your phone’s programming with another phone? Using Secure Set Relocation, you can swap most of your phone’s programming. However, -defined programming, such as Call Forward set up, Selectable Display Messaging, etc.) will not be swapped. In addition, the following items are cleared: Camp On, Last Number Redial, Saved Number Clear, Incoming History, and Common Cancelling of Service Codes. This feature will not work for virtual extensions. To swap your extension data using Secure Set Relocation:

The extensions to be swapped must be idle while the swap is performed, or an "Invalid" error message will be received. 1. From one of the telephones which is to be swapped, dial the Extension Data Swap service code. Ask your Communications Manager for this code. If a warning tone or error message is heard, the for this feature is not set - check with your Communications Manager. 2. Dial the 4 digit . If an incorrect is entered, a warning tone is heard. 3. Dial the extension number which is to be swapped. A confirmation tone is heard if the swap is completed. If it is not possible to swap the extension data, a warning tone is heard.

127

0893400_09.qxd

8/3/06

10:43 AM

Page 128

Selectable Display Messages Activate a Selectable Display Message when you leave your desk. A co-worker calling your extension will see the message you activated on their telephone's display and may hear a DND signal (depending on proramming). For example, when you leave for lunch, activate the "OUT FOR LUNCH BACK AT" message and enter the time when you will return. Your callers will know where you have gone and when you will be back. The chart below shows the standard Selectable Display Messages. You'll notice that you can add additional information to messages 1-8 and 10. Your callers will appreciate this information since they will know where to call you or when you will return. No. 1 2 3 4 5 6 7 8 9 10 11-20

128

Message IN MEETING UNTIL MEETING ROOM COME BACK xx:xx PLEASE CALL BUSY CALL AFTER OUT FOR LUNCH BACK BUSINESS TRIP BACK BUSINESS TRIP GONE FOR THE DAY ON VACATION UNTIL MESSAGE 11-20

Appended with . . . Time (when meeting done) 8 characters Time (when returning) 11 digits (phone number) Time (when returning) Time (when returning) Date (when returning) 10 digits (where reached) Date (when returning)

0893400_09.qxd

8/3/06

10:43 AM

Page 129

Selectable Display Messages To select a message: 1.

+ OR

. (Call Forward to Device).

2.

+ Message number (01-20).

Use and to scroll through the messages. 3. (Optional for messages 1-8 and 10) Dial the digits you want to append to the message. You can append messages 1-8 and 10 with digits (e.g., the time when you will be back). You enter the time in 24-hour format, but it displays in 12-hour format. 4.

To cancel a message: 1.

to select message and hang up (if you dialed *4 in step 1). Depending on system programming, DND may be activated with this feature. You can allow calls to ring thru (displaying the message to ICM callers) by cancelling DND (press DND + 0). + OR

. (Call Forward to Device).

2. 3.

to hang up (if you dialed in step 1). 129

0893400_09.qxd

8/3/06

10:43 AM

Page 130

Selectable Ring Tones If you work in an area where your extension is close to others, you may want to customize the way calls ring your phone. This will help you differentiate calls to your extension from calls to other extensions. To change your 1. extension's incoming ring tones: 2.

+

.

to set Intercom ring or to set outside line ring. Transferred calls use the Intercom ring tone you select. 3. Dial code for the ring pattern you want (tones 1-8). 4.

To listen to the 1. incoming ring choices: 2.

to hang up. +

.

to listen to Intercom ring or to listen to outside line ring. For outside line ring, enter the tone you want to listen. 3. Dial code for the ring pattern you want to hear (tones 1-8). 4.

130

to hang up.

0893400_09.qxd

8/3/06

10:43 AM

Page 131

Serial Call Do you have a caller that wants to talk to a co-worker, but needs to consult with you when they are done? If so, use Serial Call. When you Transfer a call with Serial Call, it automatically returns to you as soon as the conversation with the Transfer destination ends. Assume for a moment that you are a Customer Service Representative talking to a customer that needs technical help. Since you want to be sure that the problem is solved, you need to talk to the customer when they are done with Tech Service. With Serial Call, you can send the call to your technical department and be assured that it will come back to you when they are through. For other Transfer options, refer to the Transfer feature on page 136. To place a Serial Call: 1. Place or answer outside call. 2.

+ Co-worker's extension number. Your co-worker must lift the handset to respond to your announcement.

3.

(Serial Call) but do not hang up. When your co-worker hangs up the call, it returns as a live Transfer back to you.

131

0893400_09.qxd

8/3/06

10:43 AM

Page 132

Tandem Ringing Tandem Ringing allows a keyset to have two telephones with one phone number. For example, extension 305 (the main phone) sets Tandem Ringing with extension 306. When extension 305 receives an incoming clal, both extension 305 and 306 ring. Callers dial the main extension number (extension 305 in this example). When either the main phone or paired phone is in use, the other phone cannot be used for outgoing calls - incoming calls, however, will ring the available phone. The paired phone can only be a single line telephone or Aspire Wireless phone. 1. To set up Tandem 2. Ringing:

3. 1. To cancel Tandem 2. Ringing:

132

on the main phone. (Tandem Ringing) + 1 + extension number of the paired extension. A confirmation tone is heard. to hang up. on the main phone. (Tandem Ringing) + 0.

0893400_09.qxd

8/3/06

10:43 AM

Page 133

Tandem Trunking Tandem Trunking lets you set up a Conference with two or more outside callers and then drop out of the call - leaving the callers talking in an Unsupervised Conference. Once you drop out you are not part of the conversation. The Unsupervised Conference continues until either outside caller hangs up. Optionally, you can re the Conference and end it whenever you choose. If you are a dispatcher for outside service people, for example, you can use Tandem Trunking to put two of your service people in touch: G Answer a call from one service person. G Place a call to the second service person. G Set up the line-to-line Conference. G Drop out of the call. There are two methods for setting up Tandem Trunking. Your Communications Manager can tell you which method is available to you.

Method A To make a line-to-line 1. Set up first outside call. This can be a call you placed or Conference: answered. 2. Press . 3. Set up second outside call. 4. Press twice. You now have a Conference between you and the two outside parties. Repeat steps 2-4 to add more lines. 5. (Transfer). OR + . You drop out of the call and leave the outside callers talking to each other. The line keys for the calls blink (green) as long as the Unsupervised 133

0893400_09.qxd

8/3/06

10:43 AM

Page 134

Tandem Trunking Conference continues. If one of your outside callers hangs up, the Conference call ends. Split (separate) the Conference calls by pressing HOLD + 894.

To make a line-to-line Conference (Cont’d):

. To return to the 1. Flashing You must have a line key to be able to tandem call: re the Conference. Press Transfer key or HOLD + #8 to reinstate the Conference. If one of the callers hangs up, you continue talking to the remaining caller. To end the line-to-line 1. Press flashing Conference. Conference: 2.

Method B (Requires a

to return to the

to hang up.

[Transfer] key)

To make a line-to-line 1. Set up first outside call. This can be a call you placed or Conference: answered. 2. Press . 3. Set up second outside call. 4. Press (Transfer). You drop out of the call and leave the outside callers talking to each other. The line keys light steadily for both outside parties. + . To end the line-to-line 1. Press This immediately disconnects the Conference: Conference. 134

0893400_09.qxd

8/3/06

10:43 AM

Page 135

Time You see the Time and Date on your telephone's display when it is idle. If you notice that the Time is incorrect, you may be able to change it (the date must be changed in system programming). Use some caution, however, since the Time affects how your system routes calls and handles other features. + . To set the Time: 1. 2. Dial two digits for the hour (24 hour). For example, 13=1:00 PM. 3. Dial two digits for the minutes (00-59). You hear confirmation beeps. 4.

to hang up.

135

0893400_09.qxd

8/3/06

10:43 AM

Page 136

Transfer Transfer lets you quickly send the call you are on to a co-worker. You can Transfer both Intercom and outside calls. You can use the following types of Transfer: Screened Transfer

Announce the call to your co-worker before hanging up. Use Screened Transfer when you're not sure your co-worker is in, or you think they might not want the call.

Unscreened Transfer

Transfer the call and hang up without announcing it. This is the quickest way to Transfer. Don't worry, the call will ring back to you if your co-worker doesn't pick it up.

Extension (Department Send the call to a Department Group Group) Transfer instead of a co-worker's extension. Any idle extension within the group will get the call. Transfer Without Holding

A co-worker presses a busy line key and waits for you to be done with the caller. They automatically get the call when you hang up. This is a fast way to Transfer if you share an office and you know who's on the line.

Meet Me Paging Transfer

Transfer a call to a Page zone rather than a co-worker's extension or Department Group. Use Meet Me Paging Transfer when you're not sure where your co-worker is.

136

0893400_09.qxd

8/3/06

10:43 AM

Page 137

Transfer If you want your transferred call to automatically come back to you when your co-worker hangs up, use Serial Call (page 131).

Transferring Outside Calls To Transfer a call to a 1. You hear Transfer dial tone. co-worker's extension: 2. Dial co-worker's extension number. If the extension is busy or doesn't answer, you can dial another extension number or press the flashing line key to return to the call. In addition, you may be able to hang up and have the call Camp-On. 3. Announce call and hang up. If you don't have Automatic On Hook Transfer, you must press your Transfer Programmable Function Key to Transfer the call. If your co-worker doesn't want the call, press the flashing line key to return to the call. If you don't want to screen the call, hang up without making an announcement. or when a co-worker To answer a call trans- 1. ferred to your announces the call. extension:

Transferring Without Holding To Transfer Without 1. Holding:

(or ) + Busy . When original caller hangs up, you connect. 137

0893400_09.qxd

8/3/06

10:43 AM

Page 138

Transfer Transferring Intercom Calls To Transfer your 1. Intercom Call:

+ Extension to receive your call. If the extension is busy or doesn't answer, you can dial another extension number or press the flashing CALL key to return to the call. In addition, you may be able to hang up and have the call Camp-On. 2. Announce call and hang up. If your co-worker doesn't want the call, press the flashing CALL key to return to it. With Automatic On Hook Transfer The call is transferred when you hang up. Without Automatic On Hook Transfer You must press your Transfer Key to Transfer the call. To Transfer the call unscreened, press your Transfer key and hang up without making an announcement.

138

0893400_09.qxd

8/3/06

11:10 AM

Page 139

Transfer Meet Me External Paging Transfer To make a Meet Me 1. External Paging Transfer: 2.

+ External Paging code (1-8 or 0 for All Call). OR (External Paging Zone). OR

Combined Paging Zone code ( + 0-8). 3. Announce Call. 4. When Paged party answers, Transfer call to them.

to

+ + Announced To a Meet Me 1. External Paging External Paging code (1-8 or 0 for All Transfer: Call). You connect to the Paging party. 2. Stay on the line. After the paging party hangs up, you connect to the transferred call.

139

0893400_09.qxd

8/3/06

10:43 AM

Page 140

Transfer Meet Me Internal Paging Transfer To make a Meet Me 1. Internal Paging Transfer: 2.

+ Internal Paging code (0-9 or 00-64). OR (Internal Paging Zone). OR

Combined Paging Zone code ( + 0-8). 3. Announce Call. 4. When Paged party answers, Transfer call to them.

to

+ (if your extenTo a Meet Me 1. Internal Paging sion is in the zone called). Transfer: OR + + Zone number (0-9 or 00-64) (if your extension is not in the zone called). OR + (Internal Paging Zone Answer) (if your extension is in the zone called). 2. Stay on the line. After the Paging party hangs up, you connect to the transferred call.

140

0893400_09.qxd

8/3/06

10:43 AM

Page 141

Trunk Queuing and Camp On When you try to place an outside call and hear busy tone from your own phone system, you don't have to hang up and try again later. Use Trunk Queuing to leave a request for the busy line to call you when it's free. Just answer when Trunk Queuing rings you back and dial your call again. If you prefer, use Trunk Camp On to wait for the busy line without hanging up. With Trunk Camp On, you'll be able to use the line the moment it's available. To queue for a busy 1. Try to access outside line. Listen for busy tone. line: 2. or (Trunk Queuing). 3. Hang up to leave a Trunk Queuing request. OR Wait without hanging up for the line to become free. To answer when Trunk 1. Queuing calls you back: To cancel a Trunk 1. Queuing request: up.

or

+

.

+

to hang

141

0893400_09.qxd

8/3/06

10:43 AM

Page 142

Voice Mail

This feature requires either an optional NVM-Series Voice Mail system or an AspireMail PCB installed in the system.

Tired and frustrated by missed calls, inaccurately written messages and telephone tag? End these hassles with Integrated Voice Mail. Ask your Communications Manager if you have this type of Voice Mail system installed. Integrated Voice Mail enhances your phone by giving you: Call Forwarding to To have your incoming calls Voice Mail automatically go to your mailbox, forward your calls to Voice Mail. Your callers can leave a message instead of calling back later. You can have forwarding for all calls immediately, for unanswered calls, or for both unanswered calls and when your extension is busy. You can even have your phone emulate an answering machine (called Personal Answering Machine Emulation). Leaving a Message When you call a co-worker and their phone is unanswered, busy or in Do Not Disturb, you can easily leave a message in their mailbox. You don't have to call back later. Transferring to Voice Mail

Transfer a call to your own or a co-worker's mailbox. After the Transfer goes through, your caller can leave a message in the mailbox.

Conversation Record

While on a call, press your Record key to record the conversation in your mailbox. Voice Mail stores the conversation like any other voice message. You can then save, edit or delete the recorded conversation.

142

0893400_09.qxd

8/3/06

10:43 AM

Page 143

Voice Mail Calling Your Mailbox To call your mailbox: 1.

(Voice Mail). OR

+ . 2. (Optional) After answer, dial security code. Ask your Communications Manager for your security code. Press the MSG key to display the number of voice mail messages.

Leaving a Message To leave a message in The extension you call can be busy, in DND the mailbox of an or unanswered. unanswered 1. (Voice Mail). extension: OR

The Voice Mail system will prompt you to leave a message.

Forwarding Calls to Your Mailbox To activate or cancel 1. Call Forwarding:

+ OR

.

1. (Call Forward to Station). 2. Dial Call Forwarding condition: 2 = Busy or not answered 4 = Immediate 6 = Not answered 0 = Cancel 143

0893400_09.qxd

8/3/06

10:43 AM

Page 144

Voice Mail To activate or cancel 3. Dial Voice Mail master number or press Call Forwarding Voice Mail key. (Cont’d): 4. Dial Call Forwarding type: 2 = All calls 3 = Outside calls only 4 = Intercom calls only 5.

to hang up (if you dialed in step 1). Your DND or Call Forwarding Programmable Function Key flashes when Call Forwarding is activated.

Emulating a Personal Answering Machine To have your phone 1. emulate a personal answering machine: 1. 2.

3.

+ OR

.

(Call Forward to Station). To cancel, dial 0 and skip to step 3. + Dial Call Forwarding type: 2 = All calls 3 = Outside calls only 4 = Intercom calls only to hang up (if you dialed in step 1). Your DND or Call Forwarding (Station) Programmable Function Key flashes when Call Forwarding is activated.

144

0893400_09.qxd

8/3/06

10:43 AM

Page 145

Voice Mail When Personal 1. Do nothing and have Voice Mail autoAnswering Machine matically record your caller's message. Emulation broadcasts OR your caller's voice, Lift the handset to listen to the message you can: in private. OR Press flashing OR Press idle

to intercept the call. or

for a new call.

Transferring Calls to a Mailbox To Transfer your 1. active call to a mailbox: 2.

(Voice Mail). OR Dial Voice Mail master number. 3. Number of mailbox to receive Transfer. This number can be your mailbox number or a co-worker's mailbox number. 4.

to hang up.

Recording Your Call To record your active 1. call in your mailbox:

(Conversation Record). You hear two beeps and your Record key flashes. The beeps periodically remind you that you are recording.

145

0893400_09.qxd

8/3/06

10:43 AM

Page 146

Voice Over If you need to get through to a co-worker busy on another call, press your Voice Over key. After the Voice Over alert tone ends you can talk to your busy associate. They can respond to you without their initial caller hearing. Your co-worker can even switch back and forth between you and their initial call. Your Voice Over key shows the feature's status: When the key is . . . You are . . . Off Not using Voice Over Flashing (red) Listening to the interrupting party On (green) Responding to the interrupting party For other ways to get through to a busy co-worker, see Call Waiting (page 27), Callback (page 28), Off Hook Signaling (page 94), Message Waiting (page 85) and Voice Mail (page 142). Bleed over (the outside caller hears the Voice Over) can occur with the handset, speakerphone, or headset. To initiate a Voice You can only leave a Voice Over if you hear Over to a busy two Off Hook Signaling tones or ring-busy. co-worker: 1. (Voice Over) or . You hear the Voice Over alert tone and your Voice Over Key flashes. You can talk to your co-worker after the alert tone ends. (Voice To answer a Voice 1. Press and hold flashing Over you receive: Over). The Voice Over key lights (green) and then you can talk to the interrupting party. Note that you cannot respond by dialing the Voice Over feature code (6). (Voice Over). To return to your 1. Release You can press your Voice Over key initial call: repeatedly to switch between your initial call and the interrupting party. 146

0893400_09.qxd

8/3/06

10:43 AM

Page 147

Voice Prompting Messages

This feature requires the Voice Response System (VRS) provided by the DSP daughter board (DSPDB).

The voice prompts tell you about your system, your extension and the status of your call. The table below lists the most common voice prompts you may hear. Ask your Communications Manager if you need explanation of any other prompts.

Message

Voice Prompting Messages This message will play when . . .

This is station The time is . . . is busy, for callback dial . . . All lines are busy, for callback dial Please do not disturb The lowest cost line is busy, please wait for the next one The number you have dialed is not in service You have a message Your call cannot go through, please call the operator Your calls have been forwarded Vacant number

You dial 6 for your extension number. You dial 8 for the time and date. You call a busy extension. You try to place an outside call when all lines are busy. You call a co-worker that has enabled Do Not Disturb. ARS tries to reroute your call and the least costly route is busy. You dial a Service Code that Class of Service prevents. A co-worker has left you a Message Waiting. Toll Restriction has denied your call. You have enabled Call Forwarding. You dial an extension that does not exist.

147

0893400_09.qxd

8/3/06

10:43 AM

Page 148

Voice Prompting Messages Message

Voice Prompting Messages This message will play when . . .

Is unavailable Please start recording Recording finished

Audio file is full To listen dial To erase dial To re-record dial

An outside caller dials an extension through the Automated Attendant and the extension is busy. You dial the code to record a VRS message or Personal Greeting. You are recording a VRS message or Personal Greeting and have exceeded the maximum allowed recording length or have pressed # to end recording. There is no more space available in the VRS for storing messages. You are trying to record a VRS message or Personal Greeting and the recording already exists.

To check the system 1. Do not lift the handset or press time and date from (for Time). your 2. extension:

.

To check your 1. Do not lift the handset or press extension number: 2. (for Number).

.

148

0893400_09.qxd

8/3/06

10:43 AM

Page 149

Voice Response System (VRS)

This feature requires the Voice Response System (VRS) provided by the DSP daughter board (DSPDB).

You can record the Voice Response System (VRS) messages your system uses for Automated Attendant greetings (page 16) and the General Message (page 67). If your system has incoming 900 service, you can also record the message that plays to those callers before automatic billing occurs. You can record up to 48 messages. + To record, listen to or 1. erase a VRS Message: 2. To record, dial OR To listen, dial OR

. . .

To erase, dial . 3. Dial the VRS message number (01-48) you want to record, listen to or erase. If recording, begin when you hear the announcement, "Please start recording." When done, press # to end recording. When listening to a message, press # to hear the message again. If erasing, you can cancel erasing by pressing HOLD before hanging up. 4.

to hang up.

149

0893400_09.qxd

8/3/06

10:43 AM

Page 150

Volume Control You can control the volume of incoming ringing, splash tone, Paging, Background Music, Handsfree and your handset. Keysets consolidate all adjustments into the volume buttons. Pressing the volume buttons when the phone is idle will adjust the contrast level of the telephone’s display. Set the specific feature volume for its most comfortable level. MSG

FLASH

CONF N2IP-8

VOL

Volume Down

Volume Up

Volume control for Handsfree, Handset, Page, BGM and Riging, as well as LCD Display Adjustment

To adjust the volume 1. Press the of incoming ringing and splash tone:

or

keys.

or . To adjust volume for 1. You must press these keys while on a incoming Paging, call. BGM, Handsfree and Note: The volume must be set while the the handset: feature is in use (for example, on an idle telephone with no BGM, pressing either volume key adjusts the LCD display). You can, however, press the CALL key + 829 + VOL UP or VOL DOWN to adjust ringing at an idle phone.

150

0893400_09.qxd

8/3/06

10:43 AM

Page 151

Charts and Illustrations This section contains handy charts and illustrations for your reference. G The dialing plan (the numbers you dial) - see the following chart. G Super Display Telephone key layout (inside back cover). G Multibutton Telephone key layout (inside front cover). G DSS Console key layout (page 153). Your System's Dialing Plan Due to the flexibility built into the system, your dialing codes or feature capacities may differ from those in this guide. Check with your Communications Manager and note differences in the Revised Codes column on the following pages.

151

0893400_09.qxd

8/3/06

10:43 AM

Page 152

Charts and Illustrations

152

0893400_09.qxd

8/3/06

10:43 AM

Page 153

Charts and Illustrations Your DSS Console

0893400 - 3

1

2

3

4

5

6

7

8

9

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

43

44

45

46

47

48

49

50

51

52

53

54

55

56

57

58

59

60

61

62

63

64

65

66

67

68

69

70

71

72

73

74

75

76

77

78

79

80

81

82

83

84

85

86

87

88

89

90

91

92

93

94

95

96

97

98

99

100

ALT.

NIG HT

DAY

BREAK

Alternate Answering Key Night Service Keys

NITE2

PAGE

GRO UP

DOO R

10

EXT.1

EXT.2

Door Boxes

External Page Internal Page

2nd 100 Extensions

1st 100 Extensions

153

0893400_09.qxd

8/3/06

10:43 AM

Page 154

Charts and Illustrations

- For Your Notes -

154

0893400_09.qxd

8/3/06

10:43 AM

Page 155

Charts and Illustrations

- For Your Notes -

155

0893400_09.qxd

8/3/06

10:43 AM

Page 156

Charts and Illustrations

- For Your Notes -

156

0893400_09.qxd

8/3/06

10:43 AM

Page 1

Soft Keys guide you through your features. While your phone is idle, the Soft Keys can be used as One Touch Keys.

Alphanumeric Display

Message Waiting Lamp '03 MO TU WE TH FR SA SU 1 | 30

31

1

2

3

4

5

6

7

8

9

10

11

12

3 | 13

14

15

16

17

18

19

4 | 20

21

22

23

24

25

26

2| 0893200 - 2

OneT 5-22

THU

3:43PM

302

STA 302

List

Dir

ICM

Prog

CHECK

1

CLEAR

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

MSG

1

2

3

4

5

6

7

8

9

FLASH

CONF

DIAL

CALL 1

LND

CALL 2

MIC

DND

SPK

HOLD

0

Programmable Function Keys Abbreviated Dialing Dual Line Appearance Keys Last Number Redial Do Not Disturb

VOL

Microphone Cutoff Speakerphone Handsfree, Handset, Page, BGM and Ringing Volume Control, as well as LCD Display Adjustment

Microphone

0893400cvr8.QXD (with binding)

1/25/06

2:57 PM

Page 1

NEC Unified Solutions, Inc. 4 Forest Parkway, Shelton, CT 06484 TEL: 203-926-5400 FAX: 203-929-0535 www.necunifiedsolutions.com

Multibutton Telephone Feature Handbook

(0893400)

August 3, 2006 Printed in U.S.A.