Solaris 10 Installation Screenshots Step By Step 2o2zq

Select Keyboard Layout : [x] US – English Press F2 to continue

Select Language English : [0] and Press F2 to continue

Read & Press F2 to continue

Press F2 to continue

Select Network [yes] Press F2 to continue

Select

Use DH for e1000g0 [NO]

Press Esc -2 to continue

Host name for e1000g0 : write Host name Press Esc -2 to continue

IP address for e1000g0 : 192.168.1.195 select any available IP on Network Press Esc -2 to continue

Subnet for e1000g0 : [yes] Press Esc -2 to continue

Netmask for e1000g0 : 255.255.255.0 Press Esc -2 to continue

IPV6 for e1000g0 – [no] Press Esc -2 to continue

Select Default route for e1000g0 [Detect one upon Reboot]

Press Esc -2 to continue

Confirm Information for e1000g0 – Summary of your selection. Read & if its ok then continue Press Esc -2 to continue

Specify if system use kerberos security - [NO] Because it will block all ports for no communication for security reasons like Firewall Press Esc -2 to continue

Confirmation for Kerberos selection Press Esc -2 to continue

Name Services [None] Press Esc -2 to continue

Confirm Information Press Esc -2 to continue

[x] Use the NFS domain derived by system Press F2 to continue

Confirm Information for NFS domain Press Esc -2 to continue

Time zone [x] Asia Press Esc -2 to continue

Country & Region [x] India Press Esc -2 to continue

Date and Time select accordingly Press Esc -2 to continue

Confirm Information about Time zone Press Esc -2 to continue

Root : Enter 2 times

Press Esc -2 to continue

Enabling Remote Services [x] yes Press Esc -2 to continue

Select F2 standard

Select Default

Select Auto Reboot

License Agree [ok]

Select none Select F2 To continue

Select Posix C (c )

Additional Product [none]

Chose File System Type [x] UFS Continue

Select Software default [x] Entire Distribution Continue

Select Disk Press F4 [Edit]

Select Default

Create / root with 12 + Gb Size Create SWAP double of your Allotted RAM size Here – 2024

ZFS Installation on x86

Connect Putty with Solaris 10 1. IF YOU WANT TO AS ROOT WITH "PUTTY" ? OPEN THE PUTTY THEN ENTER THE IP OF SOLARIS THEN OPEN

2. AS : ROOT : IF YOU ENTER THE WD AND GETTING THE ERROR " ACCESS DENIED " 3. GOTO THE SOLARIS AS ROOT IN SYSTEM OR VMWARE HERE I AM USING VMWARE 4. open the shell then vi /etc/ssh/sshd_config

:/PermitRoot (This will search for PermitRoot)

Change no to yes then Esc key :wq! (this will save and quit) then restart the ssh service

5. svc restart svc:/network/ssh 6. Now with root wd from putty