Sony Dsc-h1 Service Manual 2b3o6m

DSC-H1 SERVICE MANUAL

LEVEL

2

DSC-H1

Ver 1.0 2005. 04

US Model Canadian Model AEP Model UK Model E Model Hong Kong Model Australian Model Chinese Model Japanese Model Korea Model Tourist Model

Revision History How to use Acrobat Reader

Internal memory ON BOARD

Link SPECIFICATIONS

BLOCK DIAGRAMS

PRINTED WIRING BOARDS

SERVICE NOTE

FRAME SCHEMATIC DIAGRAMS

REPAIR PARTS LIST

DISASSEMBLY

SCHEMATIC DIAGRAMS

• For ADJUSTMENTS (SECTION 6), refer to SERVICE MANUAL, ADJ (9-876-880-51). • For INSTRUCTION MANUAL, refer to SERVICE MANUAL, LEVEL 1 (9-876-880-41). • Reference number search on printed wiring boards is available. On the CH-169 and SY-127 board This service manual provides the information that is premised the circuit board replacement service and not intended repair inside the SY-127 board. Therefore, schematic diagram, printed wiring board, mounted parts location and electrical parts list of the SY-127 board are not shown. The following pages are not shown. Mounted parts location ............................. Page 4-64 Schematic diagram ............................. Pages 4-21 to 4-44 Electrical parts list ................................... Pages 5-14 to 5-18 Printed wiring board ............................ Pages 4-55 to 4-60 Waveforms ........................................... Page 4-62

DIGITAL STILL CAMERA

DSC-H1 9-876-880-31

Sony EMCS Co.

2005D1600-1 ©2005.4 Published by DI Technical Section

SPECIFICATIONS

Camera

LCD

[System] Image device

BC-CS2A/CS2B Ni-MH battery charger

[LCD screen] 7.19 mm (1/2.5 type) color CCD, Primary color filter

6.2 cm (2.5 type) TFT drive

Total number of dots 115 200 (480x240) dots

Output voltage

Total pixel number of camera Approx. 5 255 000 pixels

[Finder]

Effective pixel number of camera Approx. 5 127 000 pixels

Total number of dots 115 200 (480x240) dots

Lens

[Power, general]

12 zoom lens f = 6.0 - 72.0 mm (36 - 432 mm when converted to a 35 mm still camera) F2.8 - 3.7

LCD

Power

Exposure control Automatic exposure, Shutter speed priority, Aperture priority, Manual exposure, Scene Selection (7 modes) White balance

Automatic, Daylight, Cloudy, Fluorescent, Incandescent, Flash, One push

File format (DCF compliant) Still images: Exif Ver. 2.2 JPEG compliant, DPOF compatible Movies: MPEG1 compliant (Monaural) Recording media Internal memory 32 MB “Memory Stick” Flash

Viewfinder

Recommended distance (ISO set to Auto): 0.3 m to 6.8 m (11 26/32 inches to 22 feet 3 23/32 inches) (W)/0.9 m to 5.2 m (2 feet 11 14/32 inches to 17 feet 23/32 inches) (T)

[Input and Output connectors] A/V OUT (MONO) jack (Monaural) Minijack Video: 1 Vp-p, 75 , unbalanced, sync negative Audio: 327 mV (at a 47 k load) Output impedance 2.2 k USB jack

0.75 cm (0.3 type) TFT drive

HR 15/51:HR6 (size AA) Nickel-Metal Hydride batteries (2), 2.4 V ZR6 (size AA) Oxy Nickel Primary Battery (2, not supplied), 3 V AC-LS5K AC Adaptor (not supplied), 4.2 V

Power consumption (during shooting with the LCD screen) 1.8 W Operating temperature 0°C to +40°C (+32°F to +104°F) Storage temperature –20°C to +60°C (–4°F to +140°F) Dimensions

108x81.4x91.2 mm (4 1/4x 31/4x 35/8 inches) (W/H/D, excluding maximum protrusions)

Mass

Approx. 590.8 g (1 lb 20.8 oz) (including two batterries, shoulder strap, adaptor ring, lens hood, lens cap, etc.)

Microphone

Electret condenser microphone

Electric viewfinder (color) Speaker

Dynamic speaker

Exif Print

Compatible

PRINT Image Matching III Compatible PictBridge

Power requirements AC 100 to 240 V, 50/60 Hz, 3W

Compatible

mini-B

USB communication Hi-Speed USB (USB 2.0 compliant)

DSC-H1

—2—

AA: DC 1.4V 400 mAx2 AAA: DC 1.4 V 160 mAx2

Operating temperature 0°C to +40°C (+32°F to +104°F) Storage temperature –20°C to +60°C (–4°F to +140°F) Dimensions

Approx. 71x30x91 mm (2 7/8x 13/16x 35/8 inches) (W/H/D)

Mass

Approx. 90 g (3 oz)

Design and specifications are subject to change without notice.

SAFETY CHECK-OUT After correcting the original service problem, perform the following safety checks before releasing the set to the customer. 1.

2. 3.

4.

5. 6.

Check the area of your repair for unsoldered or poorly-soldered connections. Check the entire board surface for solder splashes and bridges. Check the interboard wiring to ensure that no wires are "pinched" or high-wattage resistors. Look for unauthorized replacement parts, particularly transistors, that were installed during a previous repair. Point them out to the customer and recommend their replacement. Look for parts which, through functioning, show obvious signs of deterioration. Point them out to the customer and recommend their replacement. Check the B+ voltage to see it is at the values specified. Flexible Circuit Board Repairing • Keep the temperature of the soldering iron around 270˚C during repairing. • Do not touch the soldering iron on the same conductor of the circuit board (within 3 times). • Be careful not to apply force on the conductor when soldering or unsoldering.

SAFETY-RELATED COMPONENT WARNING!! COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.

Unleaded solder Boards requiring use of unleaded solder are printed with the leadfree mark (LF) indicating the solder contains no lead. (Caution: Some printed circuit boards may not come printed with the lead free mark due to their particular size.)

: LEAD FREE MARK Unleaded solder has the following characteristics. • Unleaded solder melts at a temperature about 40°C higher than ordinary solder. Ordinary soldering irons can be used but the iron tip has to be applied to the solder t for a slightly longer time. Soldering irons using a temperature regulator should be set to about 350°C. Caution: The printed pattern (copper foil) may peel away if the heated tip is applied for too long, so be careful! • Strong viscosity Unleaded solder is more viscous (sticky, less prone to flow) than ordinary solder so use caution not to let solder bridges occur such as on IC pins, etc. • Usable with ordinary solder It is best to use only unleaded solder but unleaded solder may also be added to ordinary solder.

ATTENTION AU COMPOSANT AYANT RAPPORT À LA SÉCURITÉ! LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE 0 SUR LES DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.

CAUTION : Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

DSC-H1

—3—

1.

TABLE OF CONTENTS 4-3. PRINTED WIRING BOARDS SERVICE NOTE ........................................................ 1-1

2.

DISASSEMBLY

• CD-576 (CCD IMAGER) PRINTED WIRING BOARD ······················· 4-49 • MS-275 (MEMORY STICK, LI BATTERY) PRINTED WIRING BOARD ······················· 4-47 • ST-123 (FLASH DRIVE) PRINTED WIRING BOARD ······················· 4-51 • ST-124 (FLASH) PRINTED WIRING BOARD ······················· 4-52 • PL-039 (PLUNGER) PRINTED WIRING BOARD ······················· 4-51 • SW-447 (FUNCTION SW, PITCH/YAW SENSOR AMP) PRINTED WIRING BOARD ······················· 4-53 • EV-016 (EVF, BACK LIGHT) PRINTED WIRING BOARD ······················· 4-49 • AF-102 FLEXIBLE (AF LED, LENS COVER SW) PRINTED WIRING BOARD ······················· 4-47

2-1. DISASSEMBLY ······························································ 2-1 2-2. SERVICE POSITION ····················································· 2-5 2-3. CIRCUIT BOARDS LOCATION ··································· 2-7 2-4. FLEXIBLE BOARDS LOCATION ································ 2-8 HELP (List of caution points is shown here.)

3.

BLOCK DIAGRAMS

3-1. 3-2. 3-3. 3-4.

OVERALL BLOCK DIAGRAM (1/2) ··························· 3-1 OVERALL BLOCK DIAGRAM (2/2) ··························· 3-3 POWER BLOCK DIAGRAM (1/2) ································ 3-5 POWER BLOCK DIAGRAM (2/2) ································ 3-7

4.

PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS

4-1. FRAME SCHEMATIC DIAGRAM ································ 4-1 4-2. SCHEMATIC DIAGRAMS • CD-576 (CCD IMAGER) SCHEMATIC DIAGRAM ······························ 4-5 • MS-275 (MEMORY STICK, LI BATTERY) SCHEMATIC DIAGRAM ······························ 4-7 • ST-123 (FLASH DRIVE) SCHEMATIC DIAGRAM ······························ 4-9 • ST-124 (FLASH) SCHEMATIC DIAGRAM ···························· 4-17 • PL-039 (PLUNGER) SCHEMATIC DIAGRAM ······························ 4-8 • SW-447 (1/2) (FUNCTION SW) SCHEMATIC DIAGRAM ···························· 4-11 • SW-447 (2/2) (PITCH/YAW SENSOR AMP) SCHEMATIC DIAGRAM ···························· 4-13 • EV-016 (EVF, BACK LIGHT) SCHEMATIC DIAGRAM ······························ 4-7 • AF-102 FLEXIBLE (AF LED, LENS COVER SW) SCHEMATIC DIAGRAM ···························· 4-15 • SW-006 FLEXIBLE (SY-SW RELAY) SCHEMATIC DIAGRAM ···························· 4-18 • MS-029 FLEXIBLE (SY-MS RELAY) SCHEMATIC DIAGRAM ···························· 4-15 • ST-001 FLEXIBLE (SY-ST RELAY) SCHEMATIC DIAGRAM ···························· 4-17 • FP-224 FLEXIBLE (SY-CD RELAY) SCHEMATIC DIAGRAM ···························· 4-16 • CONTROL SWITCH BLOCK (SW51780) SCHEMATIC DIAGRAM ···························· 4-19

Printed wiring board of the CH-169 and SY-127 board are not shown. Pages from 4-55 to 4-60 are not shown. 4-4. WAVEFORMS ······························································ 4-61 Waveforms of the SY-127 board are not shown. Page 4-62 is not shown. 4-5. MOUNTED PARTS LOCATION ································· 4-63 Mounted parts location of the SY-127 board is not shown. Page 4-64 is not shown.

5.

REPAIR PARTS LIST

5-1. EXPLODED VIEWS ······················································ 5-3 5-1-1. OVERALL SECTION ···················································· 5-3 5-1-2. LED SECTION, CABINET(REAR) SECTION ············ 5-4 5-1-3. MAIN SECTION ··························································· 5-5 5-1-4. EVF SECTON ······························································· 5-6 5-1-5. LENS SECTION ··························································· 5-7 5-1-6. CABINET(FRONT) SECTION ····································· 5-8 5-1-7. ST SECTION ································································· 5-9 Checking supplied accessories ················································ 5-10 5-2. ELECTRICAL PARTS LIST ········································ 5-11

Shematic diagram of the CH-169 and SY-127 board are not shown. Pages from 4-21 to 4-44 are not shown.

DSC-H1

—4—

Electrical parts list of the SY-127 board are not shown. Pages from 5-14 to 5-18 are not shown.

1. SERVICE NOTE • NOTE FOR REPAIR Make sure that the flat cable and flexible board are not cracked of bent at the terminal. Do not insert the cable insufficiently nor crookedly.

When remove a connector, don't pull at wire of connector. Be in danger of the snapping of a wire.

When installing a connector, don't press down at wire of connector. Be in danger of the snapping of a wire.

Cut and remove the part of gilt which comes off at the point. (Take care that there are some pieces of gilt left inside)

[Discharging of the FLASH unit’s charging capacitor] 1 kΩ/1 W

The charging capacitor of the FLASH unit is charged up to the maximum 300 V potential. There is a danger of electric shock by this high voltage when the capacitor is handled by hand. The electric shock is caused by the charged voltage which is kept without discharging when the main power of the DSC-H1 is simply turned off. Therefore, the remaining voltage must be discharged as described below.

Wrap insulating tape.

Preparing the Short Jig To preparing the short jig. a small clip is attached to each end of a resistor of 1 kΩ /1 W (1-215-869-11) Wrap insulating tape fully around the leads of the resistor to prevent electrical shock. Discharging the Capacitor 1 Remove the main section. 2 Discharge the capacitor on the ST-123 board for about 10 seconds by using the short jig.

Caution 1 Discharging the capacitor

Capacitor

Short jig (1kΩ/1W)

ST-123 board

DSC-H1 1-1

[Description on Self-diagnosis Display]

Self-diagnosis display • C: ss: ss The contents which can be handled by customer, are displayed. • E: ss: ss The contents which can be handled by engineer, are displayed.

Display Code

Countermeasure

Cause

Caution Display During Error

C:32:01

Turn off the main power then back on.

Trouble with hardware.

SYSTEM ERROR

C:13:01

Replace the memory stick. Format the memory stick with the DSC-H1.

• The type of memory stick that cannot be used by this machine, is inserted. • Data is damaged. • Unformatted memory stick is inserted.

MS ERROR

E:91:01

Checking of flash unit or replacement of flash unit.

Abnormality when flash is being charged.

Flash LED Flash display Flashing at 3.2 Hz

Checking of lens drive circuit

When failed in the focus initialization.

E:01:XX E:61:00 *1 E:61:10 *1 Note : The error code is cleared if the battery is removed, except defective flash unit. *1: The error display is given in two ways.

DSC-H1 1-2

—

• METHOD FOR COPYING OR ERASING THE DATA IN INTERNAL MEMORY The data can be copied/erased by the operations on the Setup screen. (When erasing the data, execute formatting the internal memory.) Note: 1 When replacing the SY-127 board, erase the data in internal memory of the board before replacement. Note: 2 When replacing the SY-127 board or the IC381 on the SY-127 board, execute formatting and initialize the internal memory after replacement.

Method for Copying the Data in Internal Memory Copy Copies all images in the internal memory to a “Memory Stick”. OK

See the following procedure.

Cancel

Cancels the copying.

1 Insert a “Memory Stick” having 32 MB or larger capacity. 2 Select [OK] with v on the control button, then press z. The message “All data in internal memory will be copied Ready?” appears. 3 Select [OK] with v , then press z. Copying starts.

Copying 102_COPY

Use batteries with enough capacity or the AC Adaptor (not supplied). If you attempt to copy image files using batteries with little remaining capacity, the batteries may run out, causing copying to fail or possibly corrupting the data. You cannot copy individual images. The original images in the internal memory are retained even after copying. To delete the contents of the internal memory, remove the “Memory Stick” after copying, then execute the [Format] command in Internal Memory Tool. You cannot select a folder copied on a “Memory Stick”. The setting of (Print order) marks is not copied even when you copy data.

Method for Formatting the Internal Memory Format Formats the internal memory. Note that formatting irrevocably erases all data in the internal memory, including even protected images.

OK


Cancel

Cancels the formatting.

1 Select [OK] with v on the control button, then press z. The message “All data in internal memory will be erased Ready?” appears. 2 Select [OK] with v, then press z. The format is complete.

• PROCESS AFTER FIXING FLASH ERROR When “FLASH error” (Self-diagnosis Code E : 91 : ** ) occurs, to prevent any abnormal situation caused by high voltage, setting of the flash is changed automatically to disabling charge and flash setting. After fixing, this setting needs to be deactivated. Flash error code can be initialized by the operations on the Setup screen.

Method for Initializing the Flash Error Code Initialize Initializes the setting to the default setting. OK


Cancel

Cancels the resetting.

1 Select [OK] with v on the control button, then press z. The message “Initialize all settings Ready?” appears. 2 Select [OK] with v, then press z. The settings are reset to the default setting. Make sure that the power is not disconnected during resetting.

DSC-H1 1-3E

2. DISASSEMBLY The following flow chart shows the disassembly procedure.

2-1. DISASSEMBLY 2

2 4

2 1 7

-12 SY

3

5 5 4

1 Three screws (M2x4) silver

3

2 Three screws (M2x4) silver

1

3 Remove the JK lid in the

4

1 Light guide plate (2.5) block

direction of the arrow.

3

4 Claw

2 Two claws 1 Tapping screw (M1.7x4) black

3 Remove the LCD, Light guide plate (2.5) block

1

5 Cabinet (rear) section

2 Three claws

in the direction of the arrow. 4 LCD unit

3 Claw

5 LCD unit, Light guide plate (2.5) block

4 LCD frame assembly

3 1

Note: Be very careful not to damage the flexible board.

6 1 EV-016 board 2 Two claws 3 EVF section

5 7 -12 SY

9

2

3

4 3

7

2 Y-1

7

-44 SW

S 2

7

1

1 2 Y-1

2 Battery connector

4

S

2

3 From the loudspeaker

1 Flexible flat cable (SW-006) 2 Four tapping screws (M1.7x4) black

8

4 Three tapping screws (M1.7x4) black

3 Claw

6

5 Fuse replacement caution label

4 SW-447 board

7 -12 SY

6 SY-127 board

1 From the lens flexible board

5

3

7 6

2 FP-224 flexible board 3 From the lens flexible board

4 5 6

4 Flexible flat cable (ST-001) 5 Control switch block (SW51780) 6 AF-102 flexible board

1 Flexible flat cable (MS-029) 2 Tapping screw (M1.7x4) black 3 Two claws

SY-127

3

4

7 From the microphone 8 Tapping screw (M1.7x4) black

5 SY -12

9 Main section

7

4 MS-275 board

1

2

3

7

5 Battery connector

4

6 Three claws 7 Battery terminal board

1

5 -27 MS

ST section 2

(See page 2-3.)

DSC-H1 2-1

2

1 7

1 Flexible flat cable (MS-029)

2-2

2. DISASSEMBLY

2


Capacitor 2 1

Short jig (1kΩ/1W) 1 Two tapping screws (M1.7x4) black 1

2 Lens section

ST-123 board 1 Tapping screw (M1.7x4) black 2 Control switch block (SW51780), Microphone unit

1

5

6 HELP 01 4 1 Tapping screw (M1.7x4) black

3

HELP 02

2 Claw 3 ST-123 board 3

4 Three harnesses (HA-001) (Red, White, Blue) 5 Open the ST cover in the direction of the arrow. 6 ST section 2 1 4

2

1 Remove the AF-102 flexible board

in the direction of the arrow. 2 Three claws 3 Three claws 4 AF-102 flexible board

DSC-H1 2-3

2-4

2-2. SERVICE POSITION

2

[SERVICE POSITION TO CHECK THE SY-127 BOARD] 1

From the lens section

SW-447 board

FP-224 flexible board 2

Flexible flat cable (SW-006)

2

SW -44

4

Lens section

Monitor TV

7

5

3

1

1

Audio/Video jack

CN401

2 S

1

Y -1

CN101

2

7

CN502

5

CN513


4

Capacitor

3 Short jig (1kΩ/1W)

From the lens section Flexible flat cable (MS-029)

CN509

Battery terminal board

5

7

-2

S

M

ST-123 board

CN506 CN514

SY-127 board

MS-275 board 1

-12 SY

7

2

3 2

6 7 -12 SY

5

3

1 4

Battery section

4

3 1

Control switch block (SW51780)

Insert the batteries (size AA). Nickel Metal Hydride batteries (x2).

3 -12 SY

7

-44 SW

7

7 -12 SY

2

1

2

4

6

MS-275 board 5 9 4 3 2

7 1

-12 SY

7

8

Flexible flat cable (MS-029)

DSC-H1 2-5

2-6

2. DISASSEMBLY

2-3. CIRCUIT BOARDS LOCATION ST-123

AF-102 ST-124

MS-275 PL-039

CD-576

SW-447 CH-169 SY-127 EV-016

NAME AF-102 CD-576 CH-169 EV-016 MS-275 PL-039 ST-123 ST-124 SW-447 SY-127

FUNCTION AF LED, LENS COVER SW CCD IMAGER CCD SIGNAL PROCESS EVF, BACK LIGHT MEMORY STICK, LI BATTERY PLUNGER FLASH DRIVE FLASH FUNCTION SW, PITCH/YAW SENSOR AMP LENS DRIVE, CAMERA A/D CONV., TIMING GENERATOR, CAMERA DSP, SYSTEM CONTROL, 256Mbit SDRAM, FLASH MEMORY, SUPER AND FLASH MEMORY, A/V AMP, USB/AV JACK, SP, MIC, DRIVE, STEADY SHOT CONTROL, LENS SERVO, CONNECTOR, DC/DC CONVERTER

DSC-H1 2-7

2. DISASSEMBLY

2-4. FLEXIBLE BOARDS LOCATION The flexible boards contained in the optical unit are not shown.

CONTROL SWITCH BLOCK (SW51780)

MS-029

SW-006

ST-001

FP-224

DSC-H1 2-8E

HELP Disassembling and assembling procedures that require attention are described here. HELP 01

Harness (HA-001) (Blue)

Harness (HA-001) (White) Harness (HA-001) (Red)

HELP 02 6 7 1 Harness (H-001) (Red)

2White

2 Harness (H-001) (White) 8

3 Harness (H-001) (Blue) 4 Apply the soldering in three points. 5 ST-123 board 6 ST-124 board 7 Four claws 8 ST cover

1Red

9

3Blue

Blue

9 Tapping screw (M1.7x4) black 0 ST section

0

Red 4

White 5

DSC-H1

HELP

3. BLOCK DIAGRAMS Link

DSC-H1

OVERALL BLOCK DIAGRAM (1/2)

POWER BLOCK DIAGRAM (1/2)

OVERALL BLOCK DIAGRAM (2/2)

POWER BLOCK DIAGRAM (2/2)

3. BLOCK DIAGRAMS ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located.

3-1. OVERALL BLOCK DIAGRAM (1/2)

LENS UNIT

FP-224 FLEXIBLE BOARD

CD-576 BOARD IRIS SHUTER

IC101 CCD IMAGER

15

3

27,28 19-17

1-14

V1A,B V2 V3A,B V4 V5A,B V6 V7A,B V8, DST, VHLD

12 10 8 6 18

12 10 8 6 18

CN101

1 | 5

F2 E2 D2 B1

SHUTTER MOTOR

M

SHUTTER + SHUTTER-

8 5

9

M

ZOOM + ZOOM -

36

M

IRIS DRIVE

D6 E6 B7 C6

16

ZOOM MOTOR

(1/2)

F3 F4

FOCUS A FOCUS XA FOCUS B FOCUS XB

FOCUS MOTOR

IC401

F3 F4

39

F5 E5 D3 F1

SHUTTER DRIVE

G1 E4

FOCUS MOTOR DRIVE

D5 A6 B6 C5

40 41

MSHUT DIR MSHUT EN

D0-D31

IC353 256Mbit SDRAM

22

ZOOM RESET SENSOR 1ST

24

ZOOM RESET SENSOR 2ND

25

D8,D7,E8 E7,D6,D5 E6,B4

B3,A3,B4 B5,A5,B6 A7,B7

LCD D0-D7 LCD HD LCD VD

E9 B8

B9 A10

ZM DC FG 1A ZM DC FG 1B

VR VG VB

IC602

U5 V4

EVF BL ON EVF BL LEV

V5 W4

XSHIFT ON

7

PITCH

6

7 6

IC103

3

1

PITCH DRIVE

8

Y DRIVE A Y DRIVE B

9

7 6

3

YAW DRIVE

7

(8/11)

1

IC901

3

SE402

YAW SENSOR

12

IC401 PITCH/YAW SENSOR AMP

18

7 CN451

PITCH AD

YAW AD

4

8

IC381

IC351

SUPER AND FLASH MEMORY

FLASH MEMORY

IC107 12

L26 A20,A21,A25 D0-D15

12

STEADY SHOT CONTROL

AB13,AA13,AE13,AF13,AF12 AE12,AA12,AC12,AC11,AB12 AE11,AF11,AE10,AB11,AC10 AB10

D0-D15

AF21,AF20,AE20,AB18,AB19 AC19,AB16,AE19,AF19,AF18 AE18,AA15,AC18,AC17,AB15 AE17,AF17,AE16,AB14,AC16 AC15,AE14,

130

AUIN

184

V LINE OUT EVF BL ON EVF BL LEV

5

E6

IC801 MIC AMP

IC802

SPEAKER AMP

K26

AUOUT

E5

EV-016 FLEXIBLE BOARD

15 | 5

1

1 ST 5V

EVF BL H

D001 (EVF BACK LIGHT)

2

CN510 2

B6

MIC SIG

MIC901

MIC

1 2

A5 A2

SP+ SP-

SP901 SPEAKER

D1 AU OUT AMP

C2

3,2 AC1 AD1

CN751

USB DPP, USB DMM (USB) USB VBUS 1

3

V OUT

U25

XAV JACK IN V LINE OUT

H26

J751 A/V OUT

VIDEO AMP AU LINE OUT

XDD RST OUT SAN1 SO, SI, SCK XSHIFT ON

SW-447 BOARD (1/2) SW-006 FLEXIBLE FLAT CABLE (1/2)

DSC-H1 3-1

20

CN511

T5

(6/11)

SAN1 SO, SI, SCK

63

F3 E3

C1

Q301

9 8

CN513

PITCH PWM YAW PWM

66 65

37 38

129

14

95 96

7 21 | 17 14 | 10 6

21 19

(PAGE 3-4)

D0-D15

2

17 18 16

A01-A21

YAW PWM 4

EVF BACK LIGHT DRIVE

REF VST VCK,EN DWN,XSTB E PCG,HST HCK2,HCK1 RGT EVF BL L

5 8 9 3 4

(6/11) SAN1 SO, SCK

2

(9/11)

LPF

132

SE401

9

3

(9/11)

IC106 9

PITCH PWM

A01-A21,A25

YAW POS AD

2

7

131

X902 20MHz

8

6

LPF 8

CN101

PITCH SENSOR

(9/11)

IC105 6

PITCH POS AD

4

7

PRE DRIVE

IC102

2

2

IC104

(9/11)

YAW

(9/11)

XDD RST OUT USB VBUS

IC101

CN001

EVF COM/CS

Q602,603

TO OVERALL BLOCK DIAGRAM (2/2)

XMS IN

(9/11) P DRIVE A P DRIVE B

CN508

(7/11)

(4/11)

LCD901 2.5 INCH COLOR LCD

22 | 19 14 | 11 8 | 6 2

PSIG N6 N2

ZM DC FG 1A ZM DC FG 1B

(5/11)

6 REF VST VCK,EN DWN,XSTB M PCG,HST HCK2,HCK1 RGT

J7

31

(9/11)

24 23

COM/CS

C10

U4

ZM SENS 2ND

4 5 3

PSIG REF XSTB E VST VCK,EN DWN,XSTB M J4,H1 PCG,HST H2,G1 HCK2,HCK1 G2,F1 RGT F2,E2 D1,D2 C2,B1

L2 N5 L4

FC SENS ZM SENS 1ST ZM SENS 2ND

CN505

K4

A2 SAN1 SO, SCK

VR VG VB

R25 R5

FC DIR A FC DIR B FC EN

ZM SENS 1ST

J6

RGB DRVE TIMING GENERATOR

A9 C9

LCD CK

CN401

ACTIVE LENS ACTUATOR

K2 K3 K1

IC601

U2 T2 SAN1 SO, SI, SCK R6 XSAN RST OUT AF4

N4 P6 P4 R2

FC SENS

32

ZOOM DC FG

MS-275 BOARD (1/2)

D9

MSHUT DIR MSHUT EN

ZM DIR A ZM BRK A

5

CAMERA DSP

D17,D18,D16,B18,A19 B19,E16,D19,E19,E17 B20,A20

A0-A11

ZM DIR A ZM BRK A FOCUS RESET SENSOR

IC301 (1/2)

D21,D22,D20,B22,A22,A23 B23,E20,E21,B24,A24,A25 B25,C25,C26,B26,E10,A10 D10,E11,B10,A11,B11,E12 D11,D12,F12,B12,A12,E13 D13,D14

DIR2A BRK2A DIR2B BRK2B

FC DIR A FC DIR B FC EN

A2 B2

ZOOM MOTOR DRIVE

(4/11)

DIR2A BRK2A DIR2B BRK2B

6 8 CN506

H5 J5

7 | 20

(1/11)

4

E1

CA HDCA FD

SAN1 SO,SCK

M

XMS IN

(7/11) CN502

1

CLK TGO

47 45 46

25-38

IRIS MOTOR

TIMING GENERATOR

CN502

CN101

25-38

IRIS A IRIS XA IRIS B IRIS XB

A6

4,3,5,7,2,8

CN251 7,8,6, 4,9,3

6,5,7, 9,4,10

MS D0-MS D3, MS BS, MS CLK

(3/11) EXTAL

201 H1A,B H2A,B RG

AC4,AE4 AE5,AC5 AB6,AF6

X301 12MHz XTAL OSC

(2/11)

BUFFER

K5,G4,H4,L5 H2,H1,J1,J2 M5,J4,K4,M6 K2,K1

CA AD0 - CA AD13

6

22

22

22 | 35

S/H A/D CONV.

CCD OUT

IC102

1

MS-029 FLEXIBLE BOARD (1/2)

SY-127 BOARD (1/2)

3-2

LCD902 COLOR EVF UNIT

CN252 MEMORY STICK CONNECTOR

( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located.

3-2. OVERALL BLOCK DIAGRAM (2/2)

SY-127 BOARD (2/2) ST-001 FLEXIBLE FLAT CABLE

MS-275 BOARD (2/2)

IC301 (2/2)

MS-029 FLEXIBLE FLAT CABLE (2/2)

CN251

FLASH UNIT (ST-124 FLEXIBLE BOARD)

ST UNREG D001 (RECT)

T001

XE H 15 STRB CHG R22

4

9

10

XSTRB FULL V23

5

8

9

STRB CHG CONT AB22

6

7

6

STRB ON R4

6

7

HIGH VOLTAGE CHAGER

C004

1 2

L001 TRIGGER COIL

IC001

Q001

IGBT DRIVE

4

CN501

CN506

VL 3V 2

BT251 BATTERY (SECONDARY)

SYSTEM CONTROL

1 | 3

12 | 10

(3/11)

ST-123 BOARD

XE L

FLASH DRIVE

7

D001

CN001

2

(1/11)

A1

STRB PLUNGER ON AA25

IC401 (2/2)

AF-102 FLEXIBLE BOARD

CN507

STRB PLUNGER

8 7

B3

RY301 PLUNGER

4 3

STRB PLUNGER DRIVE XSTRB POPUP V22 XLENS COVER SENS AC23

1

4

BATTERY TERMINAL

UNREG

2 1

REG GND

CN001

S001 (LENS COVER OPEN)

VL 3V

4 3

S301 (STRB POP UP)

1

5

XAF LED

D001 (AF LED)

PL-039 BOARD

ST UNREG F001

CN514 SAN0 SO C5 SAN0 SI C6 XSAN0 SCK B6

CN509

SAN0 SO, SI, SCK

BATT SENS G5 XDD RST OUT

(11/11)

XPWR OFF

A7

UNREG

EVER 3.1V EVER 2.8V D 3.2V D 3.2V (TO CAM)

DC/DC CONVERTER REAL TIME CLOCK

F002

X001 32.768KHz

A8

OSC I

A9

OSC O

B8

D 3.2V (TO SP) A 3.2V MS VCC CAM 2.9V (TO CAM) CAM 2.9V (TO ) D 1.8V

VL 3V

C7

XPWR ON

C9

USB VBUS

SAN0 SO SAN0 SI XSAN0 SCK

XAE LOCK SW XSHUTTER SW

K25

BATT SENS

MODE DIAL 0 MODE DIAL 1

Y4 R26

XDD RST OUT

A23

B7

IC001

AB5 AA5 Y5

XPWR OFF

SHUTTER

L22 L25

14 12

MODE DIAL

AB23 W22

10 9

G25

11

E22

1

D101 (FLASH)

D23

3

D102 (POWER)

S105 JOG A JOG B

XSTRB LED XPWR LED

EXEC

EVF/LCD, FOCUS, BRK

S104 4

XPWR ON

POWER S107

1

BL H BL L XAF LED

JOG DIAL S106,101,102

KEY AD2

8.5V

A4

CONTROL SWITCH BLOCK(SW51780)

8 7

M 5V ST 5V D 1.2V

B10 XMS IN

S103

N21 P23

TO OVERALL BLOCK DIAGRAM (1/2)

XMS IN

(PAGE 3-2)

XDD RST OUT

XSHIFT ON

6

XSHIFT ON

STEADY SHOT

USB VBUS

DOWN, RIGHT, UP, LEFT, SET, DUST S458,460,456,454,457,453

CN513 KEY AD0 K23

20

1

DOWN, RIGHT, UP, LEFT, SET, DUST

KEY AD1 L23

19

2

ZOOM WIDE, ZOOM TELE, MENU, DISPLAY

1

20

S459,455,452,451

(11/11)

IC005

CAM 15V

-7,5V/15V REG

CAM -7.5V

(11/11)

XACCESS LED E4

5 4 3 2

BL H BL L

STEADY 5V

DC/DC CONV.

SW-006 FLEXIBLE FLAT CABLE (1/2)

16 17 18 19

6 4 CN452

SW-447 BOARD (2/2)

DSC-H1 3-3

LCD BACK LIGHT

D455 (ACCESS)

CN451

IC004

LED901

3-4

XENON TUBE


3-3. POWER BLOCK DIAGRAM (1/2)

4 3 BATTERY TERMINAL

UNREG

ST-123 BOARD

ST-001 FLEXIBLE FLAT CABLE

SY-127 BOARD (1/2) F001

ST UNREG

IC004

4

9

10

XSTRB FULL

5

8

9

6

7

6

4

3

ST 5V

STEADY 5V

L010

2

MS VCC

9

15

L001

IC001

C004

1 2

HIGH VOLTAGE CHAGER IGBT DRIVE

FLASH UNIT (ST-124 FLEXIBLE BOARD)

CN001

CN501

DC/DC CONV.

9

F002

STRB CHG

STRB CHG CONT

(11/11)

6 8

1

UNREG

MT 5V

(6/11)

(11/11)

MEMORY STICK CONNECTOR

9

CN251 MS VCC

EVER 3.1V

11

H1

R002

BT251 LITHIUM BATTERY (SECONDARY)

VL 3V

VL 3V

2 CN506 STRB CHG XSTRB FULL

X001 32.768KHz

R22

(3/11)

V23

STRB CHG CONT

AB22

CAMERA DSP SYSTEM CONTROL

R26

Y4

BATT SENS

B8 RTC BAT

MS PWR

A8 OSC I

LDO3IN

A9 OSC O

XDD RST OUT XPWR OFF

A23

MS PWR ON

XCS DD SAN0 SO SAN0 SI XSAN0 SCK

A7 XRESET B7 XPWR OFF MS PWR ON D3

AA5 Y5

D23

D101 (FLASH)

1

E22

D 3.2V

UNREG2

A 3.2V

MS VCC

POWER

XPWR ON

CAM 2.9V L803

VI 3.2V D 1.8V

J6 K6

XPWR LED XSTRB LED

LX5-1 LX5-2 LX5-3 LX5-4

K10

VO5

H10

(11/11)

L006

J9 J10 K9

7 Q004 SWITCHING & RECT

D003 (RECT)

15V REG

CAM 15V

6

IC005

VFB5 H9

-7.5V REG L009

GT6 H6

3

CAM -7.5V

4

TO POWER BLOCK DIAGRAM (2/2)

1

(PAGE 3-7)

1 -7.5V ON

VFB6 H7

M 5V

AU 3.2V VI 3.2V D 1.2V

PWR2

D10

L003

D 1.2V

LX2 C10

13

XPWR ON 4

C7 XPWRON1

LX3

D 3.2V

(5/11)

(4/11)

LV3

IC353

RS3


D 1.8V

F9

L008

IC351

TG4

F10

3

BL L

BL L

Q003 SWITCH M 5V ST 5V

8.5V

Q002 RECT

VFB4 F7

D3.2V

BL H

ST 5V

BG4 G9

FLASH MEMORY

BL H

F8

Q001 SWITCHING

(4/11)

D 1.2V

F003

D002 (RECT)

256Mbit SDRAM

IC381 SUPER AND FLASH MEMORY

STEADY 5V L005

E10

VO3 E9

XAF LED

CAM 2.9V

2.9V

B3

CN514

D001 (AF LED)

AU 3.2V

1

3.2V REG

B2

VFB2 D8 S104

IC803

4 3

G2

PWR56 OUT J7 K7

A 3.2V

MODE DIAL

G1

A3

D 3.2V

2

A 3.2V

(6/11)

LDO2

P25

3

D 3.2V

1.8V REG

-7.5V ON

D102 (POWER)

L001

L011

A2

LDO2IN

A6

AB5

D 3.2V A 3.2V

2.9V REG

G5 UNREGMON

XCS DD C5 SAN0 SO C6 SAN0 SI B6 XSAN0 SCK

W23

MIC AMP SPEAKER AMP AU OUT AMP

D 3.2V (TO CAM)

VFB1 H2 MS PWR IN

LDO3

IC301

K25

T25


3.1V REG.

LDO1

D 3.2V (TO CAM)

VO1-1 F1 VO1-2 F2

J1 UNREG1-1,2 K1

D001

D 3.2V (TO SP)

PWR1-1 A1 PWR1-2 B1 PWR1-3 C2

DC/DC CONVERTER REAL TIME CLOCK EVER 2.8V

IC801

AU 3.2V

IC001

MS-275 BOARD

CN252

D001 (RECT) XE H

1 | 3

ST UNREG

2 REG GND 1 CN509

T001

12 | 10

CAM 2.9V (TO )

PSG4 G8 A4

4

XAF LED

CN507

VO7 K4

8.5V

(6/11)

IC802

CAM 3.2V D821

-7.5V ON D 3.2V A 3.2V, AU 3.2V, VI 3.2V, D 1.8V, D 1.2V

DSC-H1 3-5

3-6

VIDEO AMP

XENON TUBE

3-4. POWER BLOCK DIAGRAM (2/2)


SY-127 BOARD (2/2) 201

D 3.2V

CD-576 BOARD


(2/11) D 3.2V

S/H A/D CONV. TIMING GENERATOR

A 3.2V CAM 2.9V

IC102 BUFFER

L201

CAM 15V

16

16

IC101

14

14

CCD IMAGER

CAM 15V CD CAM -7.5V

CAM -7.5V

CN101

CN502

D 3.2V

(1/11)

21

FC RST VCC

FOCUS RESET SENSOR

ZM RST VCC

ZOOM RESET SENSOR

IC401 M 5V

IRIS DRIVE SHUTTER DRIVE FOCUS MOTOR DRIVE ZOOM MOTOR DRIVE PLUNGER DRIVE

(9/11)

IC110 STEADY 5V

27 28

Q107,110

CURRENT LIMITER

ZM FG VCC

VCC

33

TO POWER BLOCK DIAGRAM (1/2)

ZOOM DC FG

CN401

FULL PWR LIM PWR

1

LENS UNIT

(9/11)

(9/11)

(9/11)

IC101 IC107

IC105 IC106

IC104

INVERTER

LPF

(9/11)

IC102 IC103

PRE DRIVE

L101

ACTIVE LENS ACTUATOR

A 4.6V 3

PITCH DRIVE YAW DRIVE

CN101

(9/11)

IC108

(PAGE 3-6) 3

A 4.6V

1

4.6V REG

L103

SW-006 FLEXIBLE FLAT CABLE

4

SW-447 BOARD IC401 PITCH/YAW SENSOR AMP

XFE ON / VAP DD ON

XFE ON / VAP DD ON

10

A 3.2V

9

11

A 3.2V

8

D 3.2V 18

D 3.2V

BL H

5

BL H

BL L

4 3 2

BL L

CN513

Q401,402

12 13

D455

3

ACCESS LED

16 17 18 19 CN451

CN452 4

FULL PWR LIM PWR

154 155

(8/11)

IC901

XFE ON / VAP DD ON 170

VDD 18

STEADY SHOT CONTROL D_1.2V

(7/11)

79

37

36

38

IC601

EVF BL ON EVF BL LEV

LCD901 2.5 INCH COLOR LCD

LED901 LCD BACK LIGHT

CN505

(7/11)

RGB DRIVE TIMING GENERATOR

IC602 EVF BL ON EVF BL LEV

BACK LIGHT DRIVE

Q602, 603 EVF BL L

ST 5V

L603

EVF BL H

8.5V

L602

VDD

D001 (EVF BACK LIGHT) 1

CN001

2 16

2

CAM_ 2.9V(TO ) CN508


DSC-H1 3-7

6

3-8E


SE401, 402 PITCH/YAW SENSOR

N

4-1 LENS UNIT

CD-576 BOARD CN101 A_4.6V Y_OUT REG_GND P_DRIV_B P_DRIV_A

3 4 5 6 7

39P

N.C.

CN507 10P


EVF,BACK LIGHT

F

G USB

20P

SY-127 BOARD

(1/11) LENS DRIVE

(2/11) CAMERA A/D CONV. TIMING GENERATOR

(3/11) CAMERA DSP,SYSTEM CONTROL

CN505 24P

(9/11) LENS SERVO

(10/11) CONNECTOR

(11/11) DC/DC CONVERTER

(CH-169 board) CCD SIGNAL PROCESS

CN101 10P

7 6 5 4 3 2 1

REG_GND XSTRB_POPUP XAF_LED D_3.2V REG_GND XLENS_COVER_SENSE

3 2 1

UNREG REG_GND REG_GND

4

8 STRB_PLUNGER

UNREG

9 REG_GND STRB_PLUNGER

10

1 MIC_GND

REG_GND

2 MIC_SIG

BL_H BL_L BL_L XACCESS_LED

18 19 20

STRB_PLUNGER REG_GND XSTRB_POPUP

1

STRB_PLUNGER

2

REG_GND 4 3

REG_GND 5

CN451 20P 6

17

CN509 4P MODE_DIAL0 A_3.2V 13

MODE_DIAL1

14

12

KEY_AD2 11

JOG_A 10

JOG_B 9

XAE_LOCK_SW 8

XSHUTTER_SW 7

XSHIFT_ON REG_GND 5

XPWR_ON

6

4

XPWR_LED 3

D_3.2V 2

XSTRB_LED 1

MS_D3

REG_GND

VL_3V

9

XMS_IN 8

MS_D2 7

MS_D0 6

MS_D1 5

MS_BS 4

REG_GND 3

2

ST_5V 9

REG_GND 8

STRB_ON 7

STRB_CHG_CONT 6

XSTRB_FULL 5

STRB_CHG 4

REG_GND 3

REG_GND

REG_GND

ST_UNREG 12 1 ST_UNREG



4 ST_5V

5 REG_GND

6 STRB_ON

7 STRB_CHG_CONT

9 STRB_CHG

10

8 XSTRB_FULL

REG_GND

2 11 REG_GND

1 12 REG_GND

DSC-H1 4-2

SY-ST RELAY

20

KEY_AD0

BL_H 17

16

MS-029 FLEXIBLE FLAT CABLE

19

KEY_AD1

REG_GND

16

15

ST-001 FLEXIBLE FLAT CABLE

18

D_3.2V

CN510 2P

Y_DRIV_B

17

REG_GND

SY-SW RELAY

9

16

VST_C_RESET

A_3.2V

REG_GND

15

LENS COVER SW

10

15

REG_GND

A_3.2V

14

13

REG_GND

8

12

YAW_AD

7

PITCH_AD

REG_GND

6

VAP_DD_ON

VST_C_RESET

5

11

REG_GND

4

REG_GND

D_3.2V

3

10

KEY_AD1

2

9

KEY_AD0

1

14

Y_DRIV_A

P_OUT

2

14

YAW_AD

1

13

8

LENS_VC

1

V3B

V7A

REG_GND

34

33

V3A

V4

33

V7A

32

V6

V8

32

V3A

31

V2

VHLD

V1B

39

31

V6

30

V5B

39

30

V2

29

V1A

REG_GND

29

VHLD

28

V5A

VST

28

V1B

27

REG_GND

38

27

V5B

26

REG_GND

37

26

V1A

25

CCD_OUT

REG_GND

REG_GND

36

25

V5A

24

23

22

38

24

REG_GND


37

23

REG_GND

SY-CD RELAY

36

22

CCD_OUT

REG_GND

CN502

21

13

REG_GND

E

V4

21

REG_GND

RG

CN401 39P

20

12

PITCH_AD


V8

20

REG_GND

REG_GND

2.5 INCH LCD UNIT

19

11

REG_GND

2 N.C.

PLUNGER

VST

19

REG_GND

CAM_15V_CD

LCD BACK LIGHT

18

POWER_SAVE

10

VAP_DD_ON

3 VDD

(1/2) FUNCTION SWITCH (2/2) PITCH/YAW SENSOR AMP

V7B

18

RG

17

16

15

9

A_3.2V

4 REG_GND

SW-447 BOARD

35

17

REG_GND

8

A_3.2V

5 EVF_VSSG

CN452 6P

34

16

CAM_15V_CD

7

REG_GND

6 HST

A

35

15

POWER_SAVE

CAM_-7.5V_CD

REG_GND

14

13

6

REG_GND

7 HCK2

12

V7B

14

H1A

REG_GND

12

11

5

BL_H

8 HCK1

11

V3B

13

L

REG_GND

12

H1A

H1B

8

H2A

REG_GND

7

REG_GND

H2B

6

9

REG_GND

5

10

RAMDOM_TRIGGER

4

4

BL_H

9 RGT

10

CAM_-7.5V_CD

11

REG_GND

8

H1B 9

7

REG_GND

10

6

3

CN513

H2A

5

VSUB

2

3

BL_L

10 DWN

9

REG_GND

4

H2B

CSUB

1

CN508 22P

REG_GND

REG_GND

2

BL_L

CN001 21P

RAMDOM_TRIGGER

ZM_DC_MOTOR_-

39

1

XACCESS_LED

11 REF

COLOR EVF UNIT

3

ZM_DC_MOTOR_-

SPEAKER

38

22

REG_GND

12 XSTB

BL_H

XZM_FG_TR

21

HST

13 VST

N.C.

6

ZM_DC_MOTOR_+

20

HCK1

14 VCK

BL_L

5

ZM_DC_MOTOR_+

19

DWN

15 EN

4

37

34

18

XSTB_E

16 PCG

N.C.

36

XZM_FG_LED

33

17

VCK

17 B

3

35

ZM_DC_FG_1A ZM_FG_VCC

32

16

_VDD

18 R

N.C.

2

ZM_RST_VCC2

28

15

EVF_VSSG

19 G

N.C.

2

VSUB

ZM_RST_VCC1

27

24

23

22

21

14

20 CS

B 1

CSUB

XZM_RST_LED1

26

COM

CS

VST

VCK

20

13

12

RGT

11

VST _REF

HCK2

9 10

8

VG

EN

7

VB

6

PCG

5

PSIG

4

CS VR

21

COM PSIG

8

1

ZM_SENS_2ND

25

XZM_RST_LED2

ZM_SENS_1ST

24

ZM_DC_FG_1B

XZM_RST_TR1

23

XZM_RST_TR2

FC_SENS

22

31

FC_RST_VCC

21

EN

19

18

17

16

15

14

13

12

11

3

7

REG_GND

M 30

XFC_RST_TR

20

DWN

_VDD

REG_GND

N.C.

_VSSG

XSTB_M

PCG

HST

2

COM

6

29

XFC_RST_LED

CN511 2P

19

LENS_TMP

FOCUS_XA

15

18

FOCUS_B

14

FOCUS_XA

FOCUS_B

13

J _REF

1

EVF_BL_L EVF_BL_H

AV

REG_GND

FOCUS_A

12

10

9

8

7

6

5

C

17

FOCUS_A

11

TEST1

N.C.

HCK2

HCK1

4

5

16

FOCUS_XB

SHUTTER_+

8

FOCUS_XB

SHUTTER_+

7

PSIG

3

2

1

D

9

SHUTTER_-

6

VG

VR

VB

RGT

TEST2

4

10

SHUTTER_-

5

SP_+ IRIS_XA

1

4

SP_-

IRIS_XB

2

IRIS_A

K IRIS_B

I 3

3

H 2

2

1

1

4. PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS

4-1. FRAME SCHEMATIC DIAGRAM 18 19

REG_GND 12 1 REG_GND

MS_VCC

CN506 12P

11 2 MS_VCC

MS_CLK 10 3 MS_CLK

1

CN501 12P

4 MS_D3

5 XMS_IN

6 MS_D2

7 MS_D0

8 MS_D1

9 MS_BS

10 REG_GND

11 VL_3V

12 REG_GND

20 21

MS-275 BOARD

MEMORY STICK, LI BATTERY

(LITHIUM BATTERY) (SECONDARY)

22

PL-039 BOARD CN301 6P

AF BATTERY

AF-102 FLEXIBLE BOARD AF LED,LENS COVER SW

MIC

CN514 14P


CN251 12P

VSS 1

MS_BS

10P

2

DATA1 3

SDIO/DATA0 4

DATA2 5

INT 6

DATA3 SCLK VCC

7

9

VSS 10


CN252

8

(4/11) 256Mbit SDRAM,FLASH MEMORY

(5/11) SUPER AND FLASH MEMORY

(6/11) A/V AND,USB/AV JACK,SP,MIC

(7/11) DRIVE

(8/11) STEADY SHOT CONTROL CN001 12P

ST-124 FLEXIBLE BOARD FLASH

FLASH DRIVE

ST-123 BOARD

39P

CCD IMAGER CCD IMAGER

16

FRAME SCHEMATIC DIAGRAM

4-2. SCHEMATIC DIAGRAMS Link CD-576 BOARD (CCD IMAGER)

EV-016 FLEXIBLE BOARD (EVF, BACK LIGHT)

MS-275 BOARD (MEMORY STICK, LI BATTERY)


ST-123 BOARD (FLASH DRIVE)

SW-006 FLEXIBLE BOARD (SY-SW RELAY)

ST-124 FLEXIBLE BOARD (FLASH)

MS-029 FLEXIBLE BOARD (SY-MS RELAY)

PL-039 BOARD (PLUNGER)

ST-001 FLEXIBLE BOARD (SY-ST RELAY)

SW-447 BOARD (1/2) (FUNCTION SW)

FP-224 FLEXIBLE BOARD (SY-CD RELAY)

SW-447 BOARD (2/2)

(PITCH/YAW SENSOR AMP)

COMMON NOTE FOR SCHEMATIC DIAGRAMS

DSC-H1

(AF LED, LENS COVER SW)


WAVEFORMS

4-2. SCHEMATIC DIAGRAMS THIS NOTE IS COMMON FOR SCHEMATIC DIAGRAMS (In addition to this, the necessary note is printed in each block) (For schematic diagrams) • All capacitors are in µF unless otherwise noted. pF : µ Link µF. 50 V or less are not indicated except for electrolytics and tantalums. • Chip resistors are 1/10 W unless otherwise noted. kΩ=1000 Ω, MΩ=1000 kΩ. • Caution when replacing chip parts. New parts must be attached after removal of chip. Be careful not to heat the minus side of tantalum capacitor, Because it is damaged by the heat. • Some chip part will be indicated as follows. Example C541 L452 22U 10UH TA A 2520

1. Connection Pattern box

Color bar chart For PTB-450: J-6020-250-A

Pattern box PTB-450 J-6082-200-A or Small pattern box PTB-1450 J-6082-557-A

For PTB-1450: J-6082-559-A

Pattern box

Kinds of capacitor

100 cm (PTB-450) 40 cm (PTB-1450)

Temperature characteristics External dimensions (mm) • Constants of resistors, capacitors, ICs and etc with XX indicate that they are not used. In such cases, the unused circuits may be indicated. • Parts with * differ according to the model/destination. Refer to the mount table for each function. • All variable and adjustable resistors have characteristic curve B, unless otherwise noted. • Signal name XEDIT → EDIT PB/XREC → PB/REC • 2: non flammable resistor • 5: fusible resistor • C: designation • A: B+ Line • B: B– Line • J : IN/OUT direction of (+,–) B LINE. • C: adjustment for repair. • A: VIDEO SIGNAL (ANALOG) • A: AUDIO SIGNAL (ANALOG) • A: VIDEO/AUDIO SIGNAL (ANALOG) • A: VIDEO/AUDIO/SERVO SIGNAL • A: SERVO SIGNAL • Circled numbers refer to waveforms. (Measuring conditions voltage and waveform) • Voltages and waveforms are measured between the measurement points and ground when camera shoots color bar chart of pattern box. They are reference values and reference waveforms. (VOM of DC 10 MΩ input impedance is used) • Voltage values change depending upon input impedance of VOM used.)

Front of the lens

A B

Red Blue

White Magenta

H

Cyan Green

Yellow

2. Adjust the distance so that the output waveform of Fig. a and the Fig. b can be obtain.

A=B

B A

Fig. a (Video output terminal output waveform)

Electronic beam scanning frame CRT picture frame

Fig.b (Picture on monitor TV)

Precautions Upon Replacing CCD imager • The CD-576 board mounted as a repair part is not equipped with a CCD imager. When replacing this board, remove the CCD imager from the old one and mount it onto the new one. • If the CCD imager has been replaced, carry out all the adjustments for the camera section. • As the CCD imager may be damaged by static electricity from its structure, handle it carefully like for the MOS IC. In addition, ensure that the receiver is not covered with dusts nor exposed to strong light.

When indicating parts by reference number, please include the board name. Note : The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified.

DSC-H1 4-3

Note : Les composants identifiés par une marque 0 sont critiques pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifié.

For Schematic Diagram • Refer to page 4-49 for printed wiring board.

4-2. SCHEMATIC DIAGRAMS

3

2

1

• Refer to page 4-61 for waveforms

4

5

6

7

CD-576 BOARD

A

9

8

V1A V1B

CCD IMAGER

V2

XX MARK:NO MOUNT

V3A V3B

NO MARK:REC/PB MODE R :REC MODE P :PB MODE

VST

1

V4 V5A CN101 39P

25

V5A

REG_GND

24

REG_GND

23

CCD_OUT

22

REG_GND

21

REG_GND

20

REG_GND

19

RG

18

REG_GND

17

CAM_15V_CD

16

POWER_SAVE

15

F

13

H1A

12

REG_GND

11

H2A

10

REG_GND

9

H1B

8

REG_GND

7

H2B

6

REG_GND

5

RAMDOM_TRIGGER

4

VSUB

3

CSUB

2

REG_GND

1

VHLD

V5B

R-6.6/P0 V8 R-6.5/P0 V7B R-6.5/P0 V7A R11.7/P0 CCD_OUT R15.1/P0 VDD

2 7

6

GND

VCC

OUT

IDRV

R15.1 P0 R4.1 P0

C101 0.01u

1

R108 0

2 Q104 DTC144EMT2L VSUB

1

R109 270k 0

R104 1500 0

R106 220k

R2.9 P0

C103 XX

R3.5 P0

2

Q102 3 DTC144EMT2L SWITCH

R105 1200

7

CL124

R-7.6 P0 R2.0 P0.1 R1.2 P0.1

R11.0 P0 R11.3 P0 CL123

R13.3 P0.3 R2.0 P0.1 R1.2 P0.1

R11.7 P0

ISF

IN

C102 0.1u 16V B 6

R11.7 P0

IC101 ICX495BQF

15 16 17 18 19 20 21 22 23 24 25 26 27 28

IC102 CXA3691EN-T9

14

REG_GND

5

BUFFER

3

C109 0.1u 16V B

CAM_-7.5V_CD

IC102

CL101

V5A

CCD IMAGER Note

V1A

V1A

1

V1B

26

2

H2A

V1A

IC101

3

H1A

V5B

CL104

27

4

V2

V5B

5

VL

V1B

V1B

6

V3A

VHLD

28

7

N.C.

29

Note:IC101 is not included in this complete board of CD-576 board.

8

V3B

VHLD

9

CSUB

V2

14 13 12 11 10

VST

30

4

SUB

31

V2

CL108

V6

V6

V4

V3A

GND

32

CL109

33

V3A

V5A

V7A

GND

V8

V7A

GND

V3B

H2B

34

CL113

V7B

1

R-0.3 P0 R-7.3 P0 R-0.3 P0 R-0.3 P0 R-0.3 P0 R-6.2 P0 R-0.4 P0 R-0.4 P0 R-0.3 P0 R-0.5 P0 R-0.5 P0

V3B

V7B

V6

35

V7A

H1B

V7B

VST

C105 0.1u 16V B

E

36

5

(PAGE 4-16)

VST

V6

4

TO FP-224 FLEXIBLE BOARD

37

1

D

V8

VHLD

V8

2

C

38

RG

V4

V4

3

B

V5B

39

C107 0.1u

REG_GND

C108 XX

R110 1M 3

G 16

DSC-H1 4-5

4-6

CD-576



2

1

3

EV-016 FLEXIBLE BOARD EVF,BACK LIGHT

22P 1

EVF_BL_H

2

COM

3

CS

4

VR

5

PCG

6

PSIG

7

LND002

A

6 2

1

D001 NSCW455T-TC9 (EVF BACK LIGHT)

LND001

EVF_BL_L

5

4

CN001 21P

LND003

21

COM

20

PSIG

19

CS

18

G

17

R

16

B

15

PCG

14

EN

13

VCK

12

VST

11

XSTB

PL-039 BOARD

LND004 LND005

A

LND006

PLUNGER XX MARK:NO MOUNT CN301 6P

LND007 LND008 8

VG

TO AF-102 FLEXIBLE BOARD

LND009 VB

9

EN

10

VST

11

_REF

12

LND010

B

TO SY-127 BOARD(7/11) CN508

(PAGE 4-15)


LND011 LND012

(PAGE 4-34 OF LEVEL3)

LND013 RGT

13

B

LND014 HCK2

14

EVF_VSSG

15

10

REF

9

DWN

8

RGT

7

HCK1

6

HCK2

5

HST

4

EVF_VSSG

3

REG_GND

2

VDD

1

N.C.

REG_GND

6

REG_GND

5

STRB_PLUNGER

4

STRB_PLUNGER

3

REG_GND

2

XSTRB_POPUP

1

16 17

D302 1SS355TE-17

2 RY301 (PLUNGER) 1

S301 (FLASH POP UP) LND301 STATIC_GND

LND016 VCK

C301 1u

D301 XX

LND015 _VDD

4

3

16

LND017 LND018

C

XSTB_E

18

DWN

19

HCK1

20

HST

21

REG_GND

22

LND019 LND020 LND021

16

LND022


1

2

3

4

5

6

MS-275 BOARD MEMORY STICK,LI BATTERY

A

XX MARK:NO MOUNT CN251 12P REG_GND

B

12

VL_3V

11

REG_GND

10

MS_BS

9

TO MS-029 FLEXIBLE FLAT CABLE

MS_D1

8

MS_D0

7

(PAGE 4-15)

MS_D2

6

XMS_IN

5

MS_D3

4

MS_CLK

BT251 (LITHIUM BATTERY) (SECONDARY)

10P 1

VSS

2

MS_BS

3

DATA1

4

SDIO

5

DATA2

6

INT

7

DATA3

3

8

SCLK

MS_VCC

2

9

VCC

REG_GND

1

10

VSS

CL251

CL257 FB251

0uH

FB252

0uH

FB253

0uH

FB254

0uH

R253 1k CL256

R251 0

C251 XX

CL262

C252 0.1u B

C LND251 STATIC_GND

16

D251 XX

CN252


Note : The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified.


DSC-H1 4-7

4-8

EV-016/MS-275/PL-039


1 ST-123 BOARD FLASH DRIVE

A

2

4

3

5


ST_UNREG

1

ST_UNREG

2

ST_UNREG

3

ST_5V

4

REG_GND

5

STRB_ON

6

STRB_CHG_CONT

7

XSTRB_FULL

8

STRB_CHG

9

REG_GND

10

REG_GND

11

REG_GND

12

9

8

10

T001 CONVERTER TRANSFORMER

XX MARK:NO MOUNT CN001 12P

7

6

L001 4.7uH

D001 FT02P80TP C001 22u 6.3V

LND003

6

2

C005 22u 6.3V

XE_H

1 TO ST-001 FLEXIBLE FLAT CABLE

B

(PAGE 4-17)

4

3

5

C004 205u 330V

3.1

TO ST-124 BOARD

C

(PAGE 4-17)

N.C

XFULL

7

6 0

5

REG_GND 3.2

5

N.C

G_IGBT

F_ON

10 11 12

CHG

LND004 0

9

VCC

IC001 TPS65552RGTR

8

0

4

C002 1u C

PGND SW

I_PEAK

0

D

PGND SW

N.C

3

5.1

R004 XX

N.C

3.1 1 2

R001 0

N.C

IC001 HIGHT VOLTAGE CHARGE, IGBT DRIVE

VBATT

HGND

17 16 15 14 13

0

E

6

2

7

3

8

R002 4.7M R003 33

1

LND005 R280.0 P13.0

XE_L

4 Q001 CY25BAJ-8F-T23 FLASH DRIVE

C003 XX

16


DSC-H1 4-9

4-10


ST-123


2

1

3

5

4

SW-447 BOARD(1/2)

A_3.2V

FUNCTION SWITCH

A

6

A_3.2V

VST_C_RESET

XX MARK:NO MOUNT

VST_C_RESET

YAW_AD

YAW_AD

PITCH_AD

R457 5600

ZOOM W

ZOOM T

S452

VAP_DD_ON

MENU 2

7 5 3 1

CN452 6P

2 NO

1 1st

2 NO

1 1st

1

N.C.

3

4 2nd

3

4 2nd

2

N.C.

3

N.C.

4

BL_L

6

5

6

5

1

4

3

S456

2

KEY_AD1

3

D_3.2V

4

REG_GND

5

VST_C_RESET

6

REG_GND

7

YAW_AD

8

REG_GND

9

PITCH_AD

10

REG_GND

11

VAP_DD_ON

12

A_3.2V

13

A_3.2V

14

REG_GND

S453

15

REG_GND

DUST

16

BL_H

17

BL_H

18

BL_L

19

BL_L

20

XACCESS_LED

D452 MAZW068H0LS0 3

3

8 6 4 2

4

2

R453 RB451 2200X4

1

VST_C_RESET

YAW_AD

R454 5600 1

S457

2

1

SET 4

D

S454

2

1

4

3

S460

PITCH_AD

RIGHT 4

3

3

R455 27k

LEFT

2

1

S458 DOWN

4

E

2

1

4

3

D451 1SS387-TPL3

2

VAP_DD_ON A_3.2V

3

REG_GND

LND451 STATIC_GND

16

BL_H

2

3

DISP 2

6

KEY_AD0

7 5 3 1

C

N.C.

1

1

4

5

330

TO SW-006 FLEXIBLE FLAT CABLE

(PAGE 4-18)

D455 SML-310LTT86 (ACCESS)

DSC-H1 4-11

LED901 LCD BACK LIGHT

CN451 20P

1

UP S451

(2/2)

8 6 4 2

S455

@W01

PITCH_AD

VAP_DD_ON

RB452 2200X4

B

R456 27k

S459

8

7

4-12

SW-447(1/2)


2

1

3

SW-447 BOARD(2/2)

5

6


PITCH/YAW SENSOR AMP

A

4

XX MARK:NO MOUNT

7

Q401,402 3.2V SWITCH L401 10uH

R3.2 P0.5 1

Q401 2SA2029T2LQ/R R2.5 P3.2

3.2

3

2

R0.1 P3.2 1

B

8

R412 47k R411 1k 2

IC401

A_3.2V

R3.2 P0

VAP_DD_ON

Q402 DTC144EMT2L

PITCH/YAW SENSOR AMP

@W01

(1/2)

3 PITCH_AD

IC0401

R1.3 P0

SE401 (PITCH SENSOR) 3

C

R403 15k C404 0.33u

R404 1M

R1.3 P0

R405 10k

R1.3 P0

1

C401 22u 6.3V TA A

2

4

R1.3 P0.2 C406 10u

C408 10u

R401 22k R402 22k

R1.3 P0 R1.3 P0

C405 0.047u

D

R0.9 P0 R0.7 P0

C403 0.1u

1

R3.2/P0.5 VCC

2

OUT1

C_RESET

3 4

AM1

OUT2

Vref1

AM2

C411 0.1u 20 19 18 17

5

HO1

Vref2

16

6

HI1

HO2

15

7

LO1

HI2

14

8

LIA1

LO2

13

9

LIB1

LIA2

12

10

GND

LIB2

11

R0 P3.1

VST_C_RESET

R1.2 P0 R1.3 P0

R406 1M

R1.3 P0

R407 10k

3

1 2

SE402 (YAW SENSOR)

YAW_AD

R408 15k C414 0.33u

R1.3 P0.2 R1.3 P0

C409 10u

C412 10u

R1.3 P0 R0.8 P0

C413 0.047u

R409 22k

R410 22k

R0.6 P0 C410 0.047u

4

C402 22u 6.3V TA A

C407 0.047u

NJM3230V(TE2)

C416 22u 6.3V TA A

C415 0.1u

E

REG_GND

16

DSC-H1 4-13

4-14

SW-447(2/2)

For Schematic Diagram • Refer to page 4-47for printed wiring board.

2

1

3

4

AF-102 FLEXIBLE BOARD 10P XLENS_COVER_SENSE

1

REG_GND

2

2

1

D001 DOR5073 (AF LED)

AF LED,LENS COVER SW

A

5

D_3.2V

3

XAF_LED

4

1

6

LND001

2

5

XSTRB_POPUP

5

LND002

3

4

39P

REG_GND

6

STRB_PLUNGER

7

STRB_PLUNGER

8

REG_GND

9

REG_GND

10

LND006

16

V8

VST

36

36

VST

V7B

35

35

V7B

V3B

34

34

V3B

REG_GND

V7A

33

33

V7A

6

REG_GND

V3A

32

32

V3A

V6

31

31

V6

V2

30

30

V2

VHLD

29

29

VHLD

V1B

28

28

V1B

V5B

27

27

V5B

V1A

26

26

V1A

V5A

25

25

V5A

REG_GND

24

24

REG_GND

REG_GND

23

23

REG_GND

CCD_OUT

22

22

CCD_OUT

REG_GND

21

21

REG_GND

(PAGE 4-8)

B


5

REG_GND

20

20

REG_GND

REG_GND

19

19

REG_GND

RG

18

18

RG

MS-029 FLEXIBLE FLAT CABLE

REG_GND

17

17

REG_GND

CAM_15V_CD

16

16

CAM_15V_CD

SY-MS RELAY

POWER_SAVE

15

15

POWER_SAVE

CAM_-7.5V_CD

14

14

CAM_-7.5V_CD

REG_GND

13

13

REG_GND

H1A

12

12

H1A

REG_GND

11

11

REG_GND

H2A

10

10

H2A

REG_GND

9

9

REG_GND

H1B

8

8

H1B

REG_GND

7

7

REG_GND

H2B

6

6

H2B

REG_GND

5

5

REG_GND

RANDOM_TRIGGER

4

4

RANDOM_TRIGGER

VSUB

3

3

VSUB

CSUB

2

2

CSUB

REG_GND

1

1

REG_GND

12P

REG_GND

12

12

REG_GND

MS_VCC

11

11

MS_VCC

MS_CLK TO SY-127 BOARD(10/11) CN506


MS_D3

10 9

10 9

MS_CLK

8

8

XMS_IN

MS_D2

7

7

MS_D2

MS_D0

6

6

MS_D0

MS_D1

5

5

MS_D1

REG_GND

4 3

4 3

E

MS_D3

XMS_IN

MS_BS

C

37

5

4

12P

B

37

STRB_PLUNGER

D A

V4

V8

4 LND021

3

38

STRB_PLUNGER

TO SY-127 BOARD (2/11) CN502

2

38

3

TO PL-039 BOARD CN301

C

1

REG_GND

V4

REG_GND

LND020

LND010

39

2 LND011

LND009

39

XSTRB_POPUP

LND016

LND008

39P

REG_GND

1 LND013

LND007

B

6P

LND012

LND005

5

SY-CD RELAY

A

LND004


4


S001 (LENS COVER OPEN)

LND003 TO SY-127 BOARD(10/11) CN507

3

TO MS-275 BOARD CN251

(PAGE 4-7)

MS_BS REG_GND

VL_3V

2

2

VL_3V

REG_GND

1

1

REG_GND

MS-029 FLEXIBLE FLAT CABLE is replaced as a block. So that this PRINTED WIRING BOARD is omitted.

F 16

TO CD-576 BOARD CN101

(PAGE 4-5)

FP-224 FLEXIBLE BOARD is replaced as a block. So that this PRINTED WIRING BOARD is omitted.

16

DSC-H1 4-15

4-16

AF-102/FP-224/MS-029

3

2

1

4

SY-ST RELAY

B

XX MARK:NO MOUNT 20P

20P

12

ST_UNREG

ST_UNREG

11

11

ST_UNREG

KEY_AD0

20

20

KEY_AD0

ST_UNREG

KEY_AD1

19

19

KEY_AD1

D_3.2V

18

18

D_3.2V

REG_GND

17

17

REG_GND

VST_C_RESET

16

16

VST_C_RESET

REG_GND

15

15

REG_GND

YAW_AD

14

14

YAW_AD

REG_GND

13

13

REG_GND

PITCH_AD

12

12

PITCH_AD

10

10

ST_5V

9

9

ST_5V

REG_GND

8

8

REG_GND

STRB_ON

7

7

STRB_ON

XSTRB_FULL

5

SY-SW RELAY

12

STRB_CHG_CONT

16

4

ST_UNREG

ST_UNREG


A

12P

12P

TO SY-127 BOARD (10/11) CN501

3


ST-001 FLEXIBLE FLAT CABLE A

2

1

5

6

6

5

5

TO ST-123 BOARD CN001

(PAGE 4-9)

STRB_CHG_CONT XSTRB_FULL

STRB_CHG

4

4

STRB_CHG

REG_GND

3

3

REG_GND

REG_GND

2

2

REG_GND

REG_GND

1

1

REG_GND

B

TO SY-127 BOARD (10/11) CN513


ST-001 FLEXIBLE FLAT CABLE is replaced as a block. So that this PRINTED WIRING BOARD is omitted.

C

16


REG_GND

11

11

REG_GND

XFE_ON/VAP_DD_ON

10

10

XFE_ON/VAP_DD_ON

A_3.2V

9

9

A_3.2V

A_3.2V

8

8

A_3.2V

REG_GND

7

7

REG_GND

REG_GND

6

6

REG_GND

BL_H

5

5

BL_H

BL_H

4

4

BL_H

BL_L

3

3

BL_L

BL_L

2

2

BL_L

XACCESS_LED

1

1

XACCESS_LED

TO SW-447 BOARD (1/2) CN451

(PAGE 4-12)

SW-006 FLEXIBLE FLAT CABLE is replaced as a block. So that this PRINTED WIRING BOARD is omitted.

1

2

3

4

5

ST-124 FLEXIBLE BOARD FLASH

A

XX MARK:NO MOUNT LND005 LND001 XE_H

XE_+ R001 1M C002 0.047u 250V

B

L001 TRIGGER COIL

LND004

XENON TUBE

TRIGGER TO ST-123 BOARD C003 0.01u 250V

(PAGE 4-10) LND002 XE_L

XE_D001 RR255L-400TE25

C

LND003 REG_GND

R002 100k 1/10W



16

DSC-H1 4-17

4-18

ST-001/ST-124/SW-006

1

2

3

5

4

R111 2K


A

S101

S102

AF/MF

BRK

R106 2K

B

R113 2K

6

R105 2K

R107 2K

7

14

13

5

12

4

11

3

10

2

1

8

R110 2K

R101 49003

8

R112 2K

R109 2K R104 2K

7

6

9

R115 2K

R116 2K R117 2K

S106 EVF/LCD

S107 STEADY SHOT

R118 2K

R114 2K

R108 10K

C

S103 SHUTTER 1

3

S104 POWER S105 JOG DIAL

4

2

D

D102 (POWER) D101 (FLASH)

E

LND115

10

9

8

7

6

5

4

3

REG_GND

XSHIFT_ON

XSHUTTER_SW

XAE_LOCK_SW

JOG_B

JOG_A

KEY_AD2

MODE_DIAL1

1

11 XPWR_ON

2

12 XPWR_LED

A_3.2V

13 D_3.2V

MODE_DIAL0

14 XSTRB_LED

CONTROL SWITCH BLOCK(SW51780) is replaced as a block. So that this PRINTED WIRING BOARD is omitted.

14P

STATIC_GND

16

TO SY-127 BOARD(10/11) CN514


Schematic diagram of the CH-169 and SY-127 board are not shown. Pages from 4-21 to 4-44 are not shown.

DSC-H1 4-19

4-20

SW51780

4-3. PRINTED WIRING BOARDS Link CD-576 BOARD

PL-039 BOARD

MS-275 BOARD

SW-447 BOARD

ST-123 BOARD


ST-124 FLEXIBLE BOARD


COMMON NOTE FOR PRINTED WIRING BOARDS MOUNTED PARTS LOCATION

NAME AF-102 CD-576 CH-169 EV-016 MS-275 PL-039 ST-123 ST-124 SW-447 SY-127

DSC-H1

CIRCUIT BOARDS LOCATION

WAVEFORMS FLEXIBLE BOARDS LOCATION

FUNCTION AF LED, LENS COVER SW CCD IMAGER CCD SIGNAL PROCESS EVF, BACK LIGHT MEMORY STICK, LI BATTERY PLUNGER FLASH DRIVE FLASH FUNCTION SW, PITCH/YAW SENSOR AMP LENS DRIVE, CAMERA A/D CONV., TIMING GENERATOR, CAMERA DSP, SYSTEM CONTROL, 256Mbit SDRAM, FLASH MEMORY, SUPER AND FLASH MEMORY, A/V AMP, USB/AV JACK, SP, MIC, DRIVE, STEADY SHOT CONTROL, LENS SERVO, CONNECTOR, DC/DC CONVERTER

4-3. PRINTED WIRING BOARDS THIS NOTE IS COMMON FOR WIRING BOARDS (In addition to this, the necessary note is printed in each block) (For printed wiring boards) • : Uses unleaded solder. : Pattern from the side which enables seeing. • (The other layers’ patterns are not indicated) • Through hole is omitted. • Circled numbers refer to waveforms. • There are a few cases that the part printed on diagram isn’t mounted in this model. • C: designation

• Chip parts. Transistor

6 5 4 4 5 6 5

C

B

E

4 4

waveforms

parts location

4-61 – – – – – – – 4-62

2 2 2 1 2 2 1 1 8

DSC-H1 4-45

3

3

1 23

2

1 2

1 2

1 6 54

1

2 3

4

3

3

4

1 1 2 4 3

2

1

2 2

1 3

4

5 4 3 3 4 5 2

1

pattern

4-63 – – – – 4-63 – – 4-64

3

1

(shown on page) (shown on page) number of layers layers not shown CD-576 MS-275 ST-123 ST-124 PL-039 SW-447 EV-016 AF-102 SY-127

Diode

1 2 3 3 2 1 1 2 3 3 2 1

BOARD INFORMATION board name

5

– – – – – – – – 2 to 7

4

3 2

5

4

1

3 1

6

3

4

1

2

4-3. PRINTED WIRING BOARDS •

• Refer to page 4-45 for common note for printed wiring board.

: Uses unleaded solder.


LND010 LND009 LND008 LND007 LND006 LND005 LND004 LND003 LND002 LND001

1

K

6

10

LND021 LND020 LND011 LND016 LND013 LND012

A

1-867-129D001

3

2

>PI<

1

16

1-867-129-

AF-102

1

AF LED

B

S001

(LENS COVER OPEN)

3

1

11 1

4

2

6

3

4

MS-275 BOARD(SIDE A)

5

LND251

MS-275 BOARD(SIDE B)

12

CN251 1

1

C252 R253 FB252

11

D251

+

CL262 + CL256

FB254 FB253 FB251

BT251

LITHIUM BATTERY (SECONDARY)

CL257 CL251

R251


1-867-122-

MS-275 >EP GW < 1-867-122-

CN252

A C251

10

12

11

1-867-122-

11


DSC-H1 4-47

4-48

AF-102/MS-275

•



CD-576 BOARD(SIDE A) 7

7 6 5

A

1

14

C101 R106 6

C102

A

CD-576 BOARD(SIDE B)

Note:IC101 is not included in this COMPLETE of CD-576 board

IC101

4

C103

IC102 1

3

C107 28

15

2

B

1

1

3

B

4 C105 C109 R110 C108

312

11

1-867-121-

R109 R104 R105

Q102

2

Q104 312

38

CN101 1

R108

39

1-867-12116

1

2

3

3

2

1

11 16


K 1

22

11

1-867-128-

1

16

>PI< EV-016 1-867-128-

D001

CN001 2

A

20

LND001 LND002 LND003 LND004 LND005 LND006 LND007 LND008 LND009 LND010 LND011 LND012 LND013 LND014 LND015 LND016 LND017 LND018 LND019 LND020 LND021 LND022

21

1

2

3

4

DSC-H1 4-49

4-50

CD-576/EV-016

•



ST-123 BOARD(SIDE B) C002

K 5

A 1

L001

12

A

D001

C003

2

1

4

12 13

2

8 9

6

R001

17

T001

5

4

1 16

1

4

3

R004

LND003 R002 R003

8

LND005

Q001

C004 IC001 5

C001

C005

A

1

ST-123 >EP GW< 1-867-123-

LND004

ST-123 BOARD(SIDE A)

CN001

11

1-867-12311

16

1

2

3

4

4

PL-039 BOARD (SIDE B)

PL-039 BOARD (SIDE A)

3

2

(FLASH POP UP)

2

RY301

11

>PI<

R001

1

LND006 2 1

>EP GW<

1-867-124-

C002

R002 LND003

LND001

C301 1-867124-

S301

D301

C003

D302

PL-039

PL-039

1-867-124-

LND002

6

CN301

L001

LND005

3

1-867-127-

11

LND004

1-867-124-

11

DSC-H1 4-51

16

ST-124 FLEXIBLE BOARD D001

1

1

ST-124-

1-867-123-

4-52

ST-123/PL-039/ST-124

•



SW-447 BOARD

CN451 1

20

A

S457

S460 2

1

2

C407

C410

ZOOM W 11

IC0401

ZOOM T 5

1 1

10

R405

C405 R401

2

S455

3 2

6

4

8

RB452 1 7

CN452

C408

7

8 RB451 2

K A

16

SE401

1

Q401

D455

C

312

4

6

3

4

R411

20

1

2

C402

2

3 12

1

A

R412

4

+

(PITCH SENSOR)

R453

+

2

S453

1

A

A

R408

S456 2

3

R455

4

4

3

C401

RIGHT D451

D452 312

R457

3

1

2 R456 R454

1

DUST

3

2

C403 R402

S458

4

C416 +

4

2

S459

R410 R409 C413

3

4

B

UP

SET

DOWN 3

2

2

C415

1

1

L401

2

(YAW SENSOR)

C412

S454

5

1

SE402

S452

Q402

1

4

C411

S451

3

4

C409

3

1

C406

4

3

6

1

1-867-125-

1

3

MENU

LEFT

C414 R403R404 R407 C404 R406

DISP

3

11

4 Printed wiring board of the CH-169 and SY-127 board are not shown. Pages from 4-55 to 4-60 are not shown.

DSC-H1 4-53

4-54

SW-447

4-3. PRINTED WIRING BOARDS

4-4. WAVEFORMS

CD-576 BOARD (CAMERA MODE) 1 IC101 1-5,7-9,qa

6 IC101 qj

4.6 Vp-p

7.7 Vp-p 265 us

74 ns

2 IC101 6

7 IC101 qk,ql,wj,wk

7.7 Vp-p 4.4 Vp-p 265 us

74 ns

3 IC101 q;

7.7 Vp-p

265 us

4 IC101 qs-qf

7.7 Vp-p 265 us

5 IC101 qg

1.8 Vp-p 265 us

Waveforms of the SY-127 board are not shown. Page 4-62 is not shown.

DSC-H1 4-61

CD-576

4-3. PRINTED WIRING BOARDS no mark : side A * mark : side B

4-5. MOUNTED PARTS LOCATION CD-576 BOARD * C101 * C102 * C103 * C105 * C107 * C108 * C109

A-1 A-1 A-1 B-3 B-1 B-3 B-3

* CN101 B-1 IC101 * IC102

A-3 A-1

* Q102 * Q104

B-3 B-2

R104 R105 R106 R108 R109 R110

B-3 B-3 A-1 B-2 B-2 B-3

* * * * * *

SW-447 BOARD C401 C402 C403 C404 C405 C406 C407 C408 C409 C410 C411 C412 C413 C414 C415 C416

B-3 B-3 C-4 B-3 B-4 C-3 B-4 C-3 C-3 B-4 B-3 C-4 B-4 B-3 B-4 B-3

CN451 A-3 CN452 C-4 D451 D452 D455

B-1 B-1 C-1

IC0401 B-4 L401

B-3

Q401 Q402

C-3 C-2

R401 R402 R403 R404 R405 R406 R407 R408 R409 R410 R411 R412 R453 R454 R455 R456 R457

C-4 C-4 B-3 B-3 B-3 B-3 B-3 B-3 B-4 B-4 B-2 B-3 C-1 B-1 C-1 B-1 C-1

RB451 C-2 RB452 C-4 S451 S452 S453 S454 S455 S456 S457 S458 S459 S460

A-1 A-3 C-1 A-2 B-4 B-2 B-2 B-1 A-4 C-2

SE401 SE402

C-3 A-3

Mounted parts location of the SY-127 board are not shown. Page 4-64 is not shown.

DSC-H1 4-63E

CD-576/SW-447

NOTE

5. REPAIR PARTS LIST NOTE: Characters A to Z of the electrical parts list indicate location of exploded views in which the desired part is shown.

EXPLODED VIEWS

Link

D I

H

OVERALL SECTION

LCD/CABINET(REAR) SECTION

B

LENS SECTION

Link

DSC-H1

EVF SECTION

MAIN SECTION

E F G

A

CABINET(FRONT) SECTION

C

ST SECTION

ELECTRICAL PARTS LIST

ACCESSORIES

AF-102 Flexible BOARD

A

CD-576 BOARD

B

EV-016 Flexible BOARD

C

MS-275 BOARD

D

PL-039 BOARD

E

ST-123 BOARD

F

ST-124 Flexible BOARD

G

SW-447 BOARD

H

SY-127 BOARD

I

5. REPAIR PARTS LIST

NOTE: • -XX, -X mean standardized parts, so they may have some differences from the original one. • Items marked “*” are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items. • The mechanical parts with no reference number in the exploded views are not supplied. • Due to standardization, replacements in the parts list may be different from the parts specified in the diagrams or the components used on the set. • CAPACITORS: uF: µF • COILS uH: µH • RESISTORS All resistors are in ohms. METAL: metal-film resistor METAL OXIDE: Metal Oxide-film resistor F: nonflammable • SEMICONDUCTORS In each case, u: µ, for example: uA...: µA... , uPA... , µPA... , uPB... , µPB... , uPC... , µPC... , uPD..., µPD...

When indicating parts by reference number, please include the board name. The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. Les composants identifiés par une marque 0 sont critiques pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifié.

• Abbreviation CND : Canadian model HK : Hong Kong model AUS : Australian model CH : Chinese model KR : Korea model JE : Tourist model J : Japanese model

Swedish Korean

Russian

Arabic Dutch

Simplified Chinese Traditional Chinese

Portugal

Italian

Spanish

German

French

Japanese

English

Area

Language that can be selected about SY-127 board

z

GP1

J

GP2

US CND AUS Vietnam

z z

GP3

AEP UK

z z z z z z

GP4

E AR BR TW

z

z

z

z

z

GP5

JE HK CH KR

z

z

z

z

z

z z

z

z

z z z

z

z

DSC-H1 5-1

5. REPAIR PARTS LIST 5-1. EXPLODED VIEWS 5-1-1. OVERALL SECTION

Cabinet (front) section (See page 5-8) E

1

D A

B

Lens section (See page 5-7)

C A

3

B C

2

D

LCD section, Cabinet (rear) section (See page 5-4)

4 7

-12 SY

1

2 2

2

Main section (See page 5-5) E

1

1

Ref. No. 1 2 3 4

Part No.

Description

3-056-233-21 3-080-204-11 A-1119-330-A 1-830-604-11

SCREW (M2), LOCK ACE, P2 SCREW, TAPPING, P2 SW-447 BOARD, COMPLETE CABLE, FLEXIBLE FLAT (SW-006)

DSC-H1 5-3

5. REPAIR PARTS LIST 5-1-2. LCD SECTION, CABINET(REAR) SECTION ns : not supplied

51 60 58

55 LED901

52 ns

53 LCD901

59

ns

56

54

57

Ref. No. 51 52 53 54 55

Part No.

Description

3-080-204-11 2-629-828-01 2-629-831-01 2-629-769-01 2-629-767-01

SCREW, TAPPING, P2 SHEET METAL (L), STRAP LID, DC WINDOW, LCD EYE CUP

Ref. No. 56 57 58 59 60

Part No.

Description

2-629-833-01 2-629-834-01 X-2055-957-1 X-2055-956-1 2-629-835-01

SHEET, LCD ADHESIVE LID, JK FRAME ASSY, LCD CABINET (REAR) ASSY BRACKET (L), STRAP

LCD901 8-753-229-36 ACX336AK-3 LED901 1-479-015-11 BLOCK, LIGHT GUIDE PLATE (2.5)

DSC-H1 5-4

5. REPAIR PARTS LIST 5-1-3. MAIN SECTION EVF section (See page 5-6)

ns : not supplied

102 ns

BT251

103

BT901

MS

-27

5

107 108

ns

104 110 109 7

-12 SY

101

(Note)

103

SP901

106

105 : BT251 (Lithium battery) MS-275 board on the mount position. (See page 4-48)

Note : Refer to the table of page 5-1 about language of SY-127 board. Ref. No.

Part No.

Description

101 102 103 104 105

X-2055-945-1 A-1119-327-A 3-080-204-11 1-830-602-11 2-629-768-01

HOLDER ASSY, BATTERY MS-275 BOARD, COMPLETE SCREW, TAPPING, P2 CABLE, FLEXIBLE FLAT (MS-029) RETAINER, SP

106 107 108 109 109

2-630-230-01 2-629-759-01 2-629-760-01 A-1127-774-A A-1127-775-A

LABEL, FUSE REPLACEMENT CAUTION SHAFT, BT SPRING, BT, OPEN SY-127 BOARD, COMPLETE (SERVICE) (GP1) SY-127 BOARD, COMPLETE (SERVICE) (GP2)


Ref. No. 109 109 109 110 SP901 0 BT251 BT901


Part No.

Description

A-1127-776-A A-1127-777-A A-1127-778-A X-2059-858-1 1-825-923-41

SY-127 BOARD, COMPLETE (SERVICE) (GP3) SY-127 BOARD, COMPLETE (SERVICE) (GP4) SY-127 BOARD, COMPLETE (SERVICE) (GP5) LID ASSY (SERVICE), BT LOUDSPEAKER (1.3CM)

1-528-999-61 BATTERY, LITHIUM SECONDARY 1-780-267-11 TERMINAL BOARD, BATTERY


DSC-H1 5-5

5. REPAIR PARTS LIST 5-1-4. EVF SECTION

156 157

LCD902

155

154

153

152 151

Ref. No. 151 152 153 154 155

Part No.

Description

A-1119-332-A 3-089-447-01 3-089-448-01 3-089-445-01 3-089-446-01

EV-016 BOARD, COMPLETE GUIDE, LAMP CUSHION, LB ILLUMINATOR SHEET, PRISM

Ref. No.

Part No.

Description

156 X-2055-959-1 HOLDER ASSY, LCD 157 X-2055-958-1 LENS ASSY, VF LCD902 8-753-233-08 LCX067AKEB-1

DSC-H1 5-6

5. REPAIR PARTS LIST 5-1-5. LENS SECTION

207 201

208 IC101

209

206

76

204

-5

CD

210

202 205

203

Ref. No. 201 202 203 204 205

Part No.

Description

A-1127-773-A 2-631-861-01 2-629-774-01 2-629-773-01 3-078-890-21

OPTICAL UNIT (B173A) (SERVICE) SHEET (CD) HEAT SINK, CCD FRAME, LENS SCREW, TAPPING

Ref. No. 206 207 208 209 210 IC101

Part No.

205

Description

2-592-605-01 1-788-298-11 2-592-693-01 A-1119-326-A

RUBBER (TM), SEAL OPTICAL FILTER BLOCK PLATE (T), LIGHT INTERCEPTION CD-576 BOARD, COMPLETE (IC101 is not included in this COMPLETE board.) 1-867-126-11 FP-224 FLEXIBLE BOARD A-1122-935-A CCD BLOCK ASSY (CCD IMAGER) (IC101 is not included in this COMPLETE board of CD-576.)

Be sure to read “Precautions upon replacing CCD imager” on page 4-1 when changing the CCD imager.

DSC-H1 5-7

5. REPAIR PARTS LIST 5-1-6. CABINET(FRONT) SECTION ns : not supplied

ST section (See page 5-9) B

259 A

256 260

253

ns

258

ns

B

259 MIC901

261 259

ns

252

254 259

251

259

257

ns A

255 259

262 Ref. No. 251 252 253 254 255

Part No.

Description

X-2055-951-1 2-629-813-01 2-629-815-01 2-629-812-01 2-629-783-01

CABINET (FRONT) ASSY PLATE, ORNAMENTAL GRIP SHEET METAL (R), STRAP SCREW, TRIPOD

Ref. No. 256 257 258 259 260

Part No.

Description

1-830-603-11 2-629-781-01 1-479-260-11 3-080-204-11 2-629-820-01

CABLE, FLEXIBLE FLAT (ST-001) PLATE (LENS), FRONT GROUND SWITCH BLOCK, CONTROL (SW51780) SCREW, TAPPING, P2 RING (W), LENS

261 2-629-817-01 HOLDER, MICROPHONE 262 A-1119-333-A AF-102 FLEXIBLE BOARD, COMPLETE MIC901 1-542-446-81 MICROPHONE

DSC-H1 5-8

5. REPAIR PARTS LIST 5-1-7. ST SECTION 306 303

304 Blue White

301

309

Red

308

310

RY301

305

307

302

ns

PRECAUTION DURING SOLENOID PLUNGER INSTALLATION 6 5

301

3 4 2 1

Ref. No. 301 302 303 304 305

Part No.

Description

3-080-204-11 A-1119-329-A X-2055-955-1 A-1119-331-A A-1119-328-A

SCREW, TAPPING, P2 PL-039 BOARD, COMPLETE BASE ASSY, ST ST-124 BOARD, COMPLETE ST-123 BOARD, COMPLETE

1 Plunger solenoid

4 PL-039 board

2 Two claws

5 Apply the soldering in two points.

3 Solenoid retainer

6 Tapping screw (M1.7x4) black

Ref. No.

DSC-H1 5-9

Part No.

Description

306 307 308 309 310

2-629-816-01 2-629-818-01 1-963-811-11 1-963-811-21 1-963-811-31

COVER, ST RETAINER, SOLENOID HARNESS (HA-001) (RED) HARNESS (HA-001) (WHITE) HARNESS (HA-001) (BLUE)

RY301

1-455-038-11 SOLENOID, PLUNGER

5. REPAIR PARTS LIST Checking supplied accessories. Make sure that the following accessories are supplied with your camcorder.

CHARGER, BATTERY (US,CND,J) (1) 1-479-378-11 BATTERY CHARGER (BC-CS2) (1) (AEP,UK,E,AUS,HK,JE) (1) 1-479-378-21 BATTERY CHARGER (BC-CS2) (1) (KR,CH) 1-479-378-31

CORD, POWER (1) (US,CND) 1-790-107-42 CORD, POWER (1) (AEP,E) 1-823-946-12 CORD, POWER (1) (AUS) 1-827-945-12 POWER-SUPPLY CORD (1) (KR) 1-823-947-12 CORD, POWER (1) (UK,HK) 1-783-374-12 CORD, POWER (1) (CH) 1-782-476-51 CORD, POWER (1) (JE,J) 1-790-732-12

CASE, BATTERY CARRYING (1) 3-074-757-01

CORD WITH CONNECTOR (1) (USB 5P) 1-827-038-11

RING, ATTACHMENT (1) 2-629-861-01

CAP ASSY, LENS (1) X-2055-960-1 STRING, CAP 3-979-194-31

CORD, CONNECTION (1) 1-824-519-11 C-S APPLI SOFT V1.6 (1) 2-583-853-01

BELT, SHOULDER (1) 2-629-892-01 ADAPTOR, CONVERSION 2P (1) (JE,E) 1-573-856-12

• Abbreviation CND : Canadian model HK : Hong Kong model AUS : Australian model CH : Chinese model KR : Korea model JE : Tourist model J : Japanese model

HOOD, LENS (1) 2-629-860-01

Other accessories 2-629-893-01 INSTRUCTION (READ THIS FIRST) (JAPANESE)(J) 2-629-893-11 INSTRUCTION (READ THIS FIRST)(ENGLISH) (US,CND,AEP,UK,E,HK,AUS,JE) 2-629-893-21 INSTRUCTION (READ THIS FIRST) (FRENCH/ITALIAN) (CND,AEP) 2-629-893-31 INSTRUCTION (READ THIS FIRST) (SPANISH/PORTUGUESE)(AEP,E,JE) 2-629-893-41 INSTRUCTION (READ THIS FIRST) (GERMAN/DUTCH) (AEP) 2-629-893-51 INSTRUCTION (READ THIS FIRST) (TRADITIONAL CHINESE/SIMPLIEIED CHINESE)(E,HK,JE,CH) 2-629-893-61 INSTRUCTION (READ THIS FIRST) (RUSSIAN/SWEDISH) (AEP) 2-629-893-71 INSTRUCTION (READ THIS FIRST) (ARABIC/PERSIAN)(E) 2-629-893-81 INSTRUCTION (READ THIS FIRST) (KOREAN)(KR,JE) 2-629-893-91 INSTRUCTION (READ THIS FIRST) (POLISH/CZECH) (AEP) 2-629-894-11 INSTRUCTION (READ THIS FIRST) (HUNGARIAN/SLOVAK)(AEP)

DSC-H1 5-10

2-629-895-01 INSTRUCTION ('S GUIDE) (JAPANESE)(J) 2-629-895-11 INSTRUCTION ('S GUIDE) (ENGLISH) (US,CND,AEP,UK,E,HK,AUS,JE) 2-629-895-21 INSTRUCTION ('S GUIDE) (FRENCH/ITALIAN) (CND,AEP) 2-629-895-31 INSTRUCTION ('S GUIDE) (SPANISH/PORTUGUESE)(AEP,E,JE) 2-629-895-41 INSTRUCTION ('S GUIDE) (GERMAN/DUTCH)(AEP) 2-629-895-51 INSTRUCTION ('S GUIDE) (TRADITIONAL CHINESE/SIMPLIEIED CHINESE)(E,HK,JE,CH) 2-629-895-61 INSTRUCTION ('S GUIDE) (RUSSIAN/SWEDISH) (AEP) 2-629-895-71 INSTRUCTION ('S GUIDE) (ARABIC/PERSIAN)(E) 2-629-895-81 INSTRUCTION ('S GUIDE) (KOREAN)(KR) 2-629-895-91 INSTRUCTION ('S GUIDE) (POLISH/CZECH)(AEP) 2-629-943-11 INSTRUCTION ('S GUIDE) (HUNGARIAN/SLOVAK) (AEP)

AF-102

CD-576

EV-016

MS-275

PL-039

5-2. ELECTRICAL PARTS LIST Ref. No.

Part No.

Description

Ref. No.

A-1119-333-A AF-102 FLEXIBLE BOARD, COMPLETE *********************** (D001 and S001 are included in this COMPLETE board.)

Part No.

Description

A-1119-327-A MS-275 BOARD, COMPLETE *********************** < BATTERY >

< DIODE > 0 BT251 D001

not supplied

1-756-539-21 BATTERY, LITHIUM SECONDARY

DIODE DOR5073 < CAPACITOR > < SWITCH > C252

1-125-777-11 CERAMIC CHIP

S001 not supplied SWITCH, PUSH (1 KEY) ************************************************************

0.1uF

10%

10V

< CONNECTOR >

A-1119-326-A CD-576 BOARD, COMPLETE ********************** (IC101 is not included in this COMPLETE board.)

CN251 CN252

1-816-644-31 FFC/FPC CONNECTOR (LIF) 12P 1-815-572-71 CONNECTOR, MEMORY STICK < FERRITE BEAD >

< CAPACITOR > C101 C102 C105 C107 C109

1-164-943-81 1-107-826-11 1-107-826-11 1-107-826-11 1-107-826-11

CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP

0.01uF 0.1uF 0.1uF 0.1uF 0.1uF

10% 10% 10% 10% 10%

FB251 FB252 FB253 FB254

16V 16V 16V 16V 16V

R251 1-218-990-81 SHORT CHIP 0 R253 1-218-953-11 RES-CHIP 1K 5% 1/16W ************************************************************

1-817-544-31 CONNECTOR, FPC (ZIF) 39P < IC >

IC101

IC102

A-1119-329-A PL-039 BOARD, COMPLETE **********************

A-1122-935-A CCD BLOCK ASSY (CCD IMAGER) (IC101 is not included in this COMPLETE of CD-576 board.)

< CAPACITOR >

8-753-230-85 IC CXA3691EN-T9

C301

< TRANSISTOR > Q102 Q104

6-550-119-01 TRANSISTOR 6-550-119-01 TRANSISTOR

BEAD, FERRITE (1005) BEAD, FERRITE (1005) BEAD, FERRITE (1005) BEAD, FERRITE (1005) < RESISTOR >

< CONNECTOR > CN101

1-400-807-21 1-400-807-21 1-400-807-21 1-400-807-21

1-165-908-11 CERAMIC CHIP

1uF

10%

10V

< CONNECTOR > DTC144EMT2L DTC144EMT2L

CN301

1-816-654-31 FFC/FPC CONNECTOR (LIF) 6P < DIODE >

< RESISTOR > D302 R104 R105 R106 R108 R109

1-218-955-11 1-218-954-11 1-218-981-11 1-218-990-81 1-218-982-11

RES-CHIP RES-CHIP RES-CHIP SHORT CHIP RES-CHIP

1.5K 1.2K 220K 0 270K

5% 5% 5%

1/16W 1/16W 1/16W

5%

1/16W

8-719-988-61 DIODE 1SS355TE-17 < RELAY >

RY301

1-455-038-11 SOLENOID, PLUNGER < SWITCH >

R110 1-218-989-11 RES-CHIP 1M 5% 1/16W ************************************************************

S301 1-786-179-31 SWITCH, PUSH (1KEY) ************************************************************

A-1119-332-A EV-016 FLEXIBLE BOARD, COMPLETE **********************


< CONNECTOR > CN001

1-817-560-31 CONNECTOR, FPC (ZIP) 21P


< DIODE > D001 6-501-154-01 DIODE NSCW455AT-TY5 ************************************************************

Be sure to read “Precautions upon replacing CCD imager” on page 4-1 when changing the CCD imager.

DSC-H1 5-11


ST-123 Ref. No.

Part No.

Description

Ref. No.

A-1119-328-A ST-123 BOARD, COMPLETE **********************

Part No.

1-100-611-91 1-100-506-91 1-112-468-11 1-100-611-91

CERAMIC CHIP CERAMIC CHIP ELECT CERAMIC CHIP

SW-447

Description

A-1119-330-A SW-447 BOARD, COMPLETE ***********************

< CAPACITOR > C001 C002 0 C004 C005

ST-124

< CAPACITOR > 22uF 1uF 205uF 22uF

20% 20% 99% 20%

6.3V 6.3V 330V 6.3V

C401 C402 C403 C404 C405

1-119-750-11 1-119-750-11 1-125-777-11 1-128-934-61 1-119-923-11

TANTAL. CHIP TANTAL. CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP

22uF 22uF 0.1uF 0.33uF 0.047uF

20% 20% 10% 10% 10%

6.3V 6.3V 10V 10V 10V

C406 C407 C408 C409 C410

1-137-710-11 1-119-923-11 1-137-710-11 1-137-710-11 1-119-923-11


10uF 0.047uF 10uF 10uF 0.047uF

20% 10% 20% 20% 10%

6.3V 10V 6.3V 6.3V 10V

C411 C412 C413 C414 C415

1-125-777-11 1-137-710-11 1-119-923-11 1-128-934-61 1-125-777-11


0.1uF 10uF 0.047uF 0.33uF 0.1uF

10% 20% 10% 10% 10%

10V 6.3V 10V 10V 10V

C416

1-119-750-11 TANTAL. CHIP

22uF

20%

6.3V

< CONNECTOR > CN001

1-816-644-31 FFC/FPC CONNECTOR (LIF) 12P < DIODE >

0 D001

6-501-141-01 DIODE FT02P80TP < IC >

0 IC001

6-707-555-01 IC TPS65552RGTR < COIL >

L001

1-456-499-11 INDUCTOR

4.7uH < CONNECTOR >

< TRANSISTOR > 0 Q001

6-550-656-01 TRANSISTOR

CN451 CN452

CY25BAJ-8F-T23

1-818-046-11 FFC/CONNECTOR, FPC (LIF (NON-ZIF)) 20P 1-818-619-21 CONNECTOR, FFC/FPC (ZIF) 6P < DIODE >

< RESISTOR > R001 R002 R003

1-216-864-11 SHORT CHIP 1-243-975-81 METAL CHIP 1-218-935-11 RES-CHIP

0 4.7M 33

5% 5%

D451 D452 D455

1/16W 1/16W

8-719-056-23 DIODE MA2S111-(K8).SO 6-500-776-01 DIODE MAZW068H0LS0 8-719-064-07 DIODE SML-310LTT86 < IC >

< TRANSFORMER > 0 T001 1-443-689-11 TRANSFORMER, D.C.-D.C.CONVERTER ************************************************************

IC0401

8-759-489-19 IC uPC6756GR-8JG-E2 < COIL >

A-1119-331-A ST-124 FLEXIBLE BOARD, COMPLETE ********************** 0

L401

1-469-757-21 INDUCTOR < TRANSISTOR >

1-479-261-11 FLASH UNIT Q401 Q402

< CAPACITOR > C002 C003

1-100-758-11 CERAMIC CHIP 1-100-761-21 CERAMIC CHIP

0.047uF 0.01uF

10% 10%

2SA2029T2LQ/R DTC144EMT2L

< RESISTOR >

6-500-811-01 DIODE RR255L-400TE25 < COIL >

L001

6-550-232-01 TRANSISTOR 6-550-119-01 TRANSISTOR

250V 250V

< DIODE > D001

10uH

1-456-193-11 COIL, TRIGGER < RESISTOR >

R001 1-216-121-11 RES-CHIP 1M 5% 1/10W R002 1-216-097-11 RES-CHIP 100K 5% 1/10W ************************************************************

R401 R402 R403 R404 R405

1-218-969-11 1-218-969-11 1-218-967-11 1-218-989-11 1-218-965-11

RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP

22K 22K 15K 1M 10K

5% 5% 5% 5% 5%

1/16W 1/16W 1/16W 1/16W 1/16W

R406 R407 R408 R409 R410

1-218-989-11 1-218-965-11 1-218-967-11 1-218-969-11 1-218-969-11

RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP

1M 10K 15K 22K 22K

5% 5% 5% 5% 5%

1/16W 1/16W 1/16W 1/16W 1/16W


DSC-H1 5-12


SW-447 Ref. No.

Part No.

Description

R411 R412 R453 R454 R455

1-218-953-11 1-218-973-11 1-208-671-11 1-218-962-11 1-218-970-11

RES-CHIP RES-CHIP METAL CHIP RES-CHIP RES-CHIP

R456 R457

1-218-970-11 RES-CHIP 1-218-962-11 RES-CHIP

1K 47K 330 5.6K 27K

5% 5% 0.5% 5% 5%

1/16W 1/16W 1/16W 1/16W 1/16W

27K 5.6K

5% 5%

1/16W 1/16W

< COMPOSITION CIRCUIT BLOCK > RB451 RB452

1-234-376-21 RES, NETWORK 1-234-376-21 RES, NETWORK

2.2K (1005X4) 2.2K (1005X4)

< SWITCH > S451 S452 S453 S454 S455

1-786-157-11 1-786-157-11 1-786-157-11 1-786-157-11 1-786-525-31

SWITCH, TACTILE (DISP) SWITCH, TACTILE (MENU) SWITCH, TACTILE (DUST) SWITCH, TACTILE (LEFT) TACTILE SWITCH (ZOOM T)

S456 S457 S458 S459 S460

1-786-157-11 1-786-157-11 1-786-157-11 1-786-525-31 1-786-157-11

SWITCH, TACTILE (UP) SWITCH, TACTILE (SET) SWITCH, TACTILE (DOWN) TACTILE SWITCH (ZOOM W) SWITCH, TACTILE (RIGHT) < SENSOR >

SE401 1-476-807-31 SENSOR, ANGULAR VELOCITY (PITCH) SE402 1-476-807-41 SENSOR, ANGULAR VELOCITY (YAW) ************************************************************ SY-127 BOARD, COMPLETE **********************

Electrical parts list of the SY-127 board are not shown. Pages from 5-14 to 5-18 are not shown.

DSC-H1 5-13E

SY-127

[Description of main button functions on toolbar of the Adobe Acrobat Reader Ver5.0 (for Windows)]

Toolbar Printing a text

Reversing the screens displayed once

1. Click the Print button . 2. Specify a printer, print range, number of copies, and other options, and then click [OK].

• To reverse the previous screens (operation) one by one, click . the • To advance the reversed screens (operation) one by one, click the

.

Application of printing: To set a range to be printed within a page, select the graphic and drag on the page to enclose a range to selection tool be printed, and then click the Print button.

Application to the Service Manual: This function allows you to go and back between circuit diagram and printed circuit board diagram, and accordingly it will be convenient for the voltage check.

Finding a text 1. Click the Find button . 2. Enter a character string to be found into a text box, and click the [Find]. (Specify the find options as necessary)

Application to the Service Manual: To execute “find” from current page toward the previous pages, select the check box “Find Backward” and then click the “Find”.

Moving with link 1. Select either palm tool

, zoom tool

, text selection tool

, or graphic selection tool . 2. Place the pointer in the position in a text where the link exists (such as a button on cover and the table of contents page, or blue characters on the removal flowchart page or drawing page), and the pointer will change to the forefinger form . 3. Then, click the link. (You will go to the link destination.)

Moving with bookmark: Click an item (text) on the bookmark pallet, and you can move can display the to the link destination. Also, clicking hidden items. (To go back to original state, click ) 3. Open the find dialog box again, and click the [Find Again] and you can find the matched character strings displayed next. (Character strings entered previously are displayed as they are in the text box.)

Application to the Service Manual: The parts on the drawing pages (block diagrams, circuit diagrams, printed circuit boards) and parts list pages in a text can be found using this find function. For example, find a Ref. No. of IC on the block diagram, and click the [Find Again] continuously, so that you can move to the Ref. No. of IC on the circuit diagram or printed circuit board diagram successively. Note: The find function may not be applied to the Service Manual depending on the date of issue.

Zooming or rotating the screen display “Zoom in/out” • Click the triangle button in the zoom control box to select the display magnification. Or, you may click ing in or out.

or

for zoom-

Switching a page • To move to the first page, click the

.

• To move to the last page, click the

.

• To move to the previous page, click the • To move to the next page, click the

.

.

“Rotate” • Click rotate tool

, and the page then rotates 90 degrees each.

Application to the Service Manual: The printed circuit board diagram you see now can be changed to the same direction as the set.

Reverse

987688031.pdf

Revision History Ver.

Date

1.0

2005.04

DSC-H1

History Official Release

Contents —

S.M. Rev. issued —

Sony Dsc-h1 Service Manual 2b3o6m

Overview 26281t

More details 6y5l6z

Related Documents 3h463d

Sony Bravia Service Manual 3t3k10

Sony+hvr-hd1000 Service Manual 2u33t

Sony Ericsson W395 Service Manual 4j153m

Sony Cdx-gt300mp Service Manual 3j1j3n

Sony Mz-r900 Service Manual 166h2t

Sony Dsc-f828 Service Manual 4q6c1j

More Documents from "Vlad PANAIT" 682c1y

Sony Dsc-h1 Service Manual 2b3o6m

2013 Lp2-office365 R 6x1l68

Hirens Bootcd 10.4 384x15

Power Burst Royal Led Jump Starter Manual 6sk4s

4p345f

The-road-to-wealth-by-robert-g.-allen.pdf 5w4f1y