Soot Sticks-soot Remover 4w1c3a
This document was ed by and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this report form. Report 3i3n4
Overview 26281t
& View Soot Sticks-soot Remover as PDF for free.
More details 6y5l6z
- Words: 419
- Pages: 2
SOOT STICKS / SOOT REMOVER 1. DESCRIPTION Active blend of mineral based salts, containing slag modifiers and carbon oxidation catalyst. Each stick contains approximately 0.5 kg. of SOOT REMOVER.
IMPROVES THE CONDITION OF COMBUSTION GAS ES IN BOILERS BURNING HEAVY FUEL OIL OR COAL
2. APPLICATIONS To remove unburned carbon slag deposits from: •
Boiler furnaces, superheaters, economizers, air heaters and exhaust path / stacks.
3. DIRECTIONS FOR USE Determine the quantity of SOOT STICKS / SOOT REMOVER required by quantity of fuel consumed per boiler per day. See PRODUCT DOSE.
Product Highlights • • • • • • •
Reduces soot and slag deposits. Reduces cold end corrosion. Improves heat transfer and aids soot blowing. Increases boiler efficiency. Reduces cleaning costs. No need to shut down boiler or plant when dosing. Available in easy-to-use stick form.
Introduce the appropriate amount of SOOT STICKS / SOOT REMOVER into the hottest part of the boiler furnace by adopting any of the following methods: • •
•
Open a boiler peephole or furnace door and throw in the required number of sticks. Remove the burner and shoot the required number of sticks through the body of the burner housing into the furnace and replace the burner. If the boiler is equipped with dosing injector simply pour the contents of the stick into the injectors and direct the nozzle towards the hottest area of the flame.
This information is not to be taken as a warranty or representation for which we assume any legal responsibility. The information is offered solely for your consideration, investigation and verification
4. INITIAL DOSAGE For oil-fired boilers, the daily dosage depends on the fuel oil consumption per boiler, per day. Consult your local UNIAMERICAS Service Engineer for recommendations of the dosage rate based on specific problems and requirements onboard. Note: for best results apply SOOT STICKS / SOOT REMOVER daily, immediately after soot blowing. 5. OTHER INFORMATION • •
• • • •
Reduces soot and slag deposits by transforming them into dry, powdery ashes, which are easily removed. Reduces cold end corrosion by neutralizing sulphuric acid deposits on surfaces where the temperature is lower than the dew point of the exhaust gas. Improves heat transfer and aids soot blowing due to reduction in deposits. Increases boiler efficiency. Reduces cleaning costs by decreasing maintenance and frequency of cleaning. No need to shut down boiler or plant when dosing. Page 1 of 1
SOOT STICKS / SOOT REMOVER •
Available in easy-to-use stick form.
Page 2 of 2
IMPROVES THE CONDITION OF COMBUSTION GAS ES IN BOILERS BURNING HEAVY FUEL OIL OR COAL
2. APPLICATIONS To remove unburned carbon slag deposits from: •
Boiler furnaces, superheaters, economizers, air heaters and exhaust path / stacks.
3. DIRECTIONS FOR USE Determine the quantity of SOOT STICKS / SOOT REMOVER required by quantity of fuel consumed per boiler per day. See PRODUCT DOSE.
Product Highlights • • • • • • •
Reduces soot and slag deposits. Reduces cold end corrosion. Improves heat transfer and aids soot blowing. Increases boiler efficiency. Reduces cleaning costs. No need to shut down boiler or plant when dosing. Available in easy-to-use stick form.
Introduce the appropriate amount of SOOT STICKS / SOOT REMOVER into the hottest part of the boiler furnace by adopting any of the following methods: • •
•
Open a boiler peephole or furnace door and throw in the required number of sticks. Remove the burner and shoot the required number of sticks through the body of the burner housing into the furnace and replace the burner. If the boiler is equipped with dosing injector simply pour the contents of the stick into the injectors and direct the nozzle towards the hottest area of the flame.
This information is not to be taken as a warranty or representation for which we assume any legal responsibility. The information is offered solely for your consideration, investigation and verification
4. INITIAL DOSAGE For oil-fired boilers, the daily dosage depends on the fuel oil consumption per boiler, per day. Consult your local UNIAMERICAS Service Engineer for recommendations of the dosage rate based on specific problems and requirements onboard. Note: for best results apply SOOT STICKS / SOOT REMOVER daily, immediately after soot blowing. 5. OTHER INFORMATION • •
• • • •
Reduces soot and slag deposits by transforming them into dry, powdery ashes, which are easily removed. Reduces cold end corrosion by neutralizing sulphuric acid deposits on surfaces where the temperature is lower than the dew point of the exhaust gas. Improves heat transfer and aids soot blowing due to reduction in deposits. Increases boiler efficiency. Reduces cleaning costs by decreasing maintenance and frequency of cleaning. No need to shut down boiler or plant when dosing. Page 1 of 1
SOOT STICKS / SOOT REMOVER •
Available in easy-to-use stick form.
Page 2 of 2
Related Documents 3h463d
Soot Sticks-soot Remover 4w1c3a
November 2022 0
Soot Blower.pdf 5h4r6p
October 2019 100
Remover Toco 6p2g30
August 2022 0
Remover Gbuster 405d28
September 2022 0
Animated Soot Blower 3z221l
March 2023 0