Stk412-150 546o2s
This document was ed by and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this report form. Report 3i3n4
Overview 26281t
& View Stk412-150 as PDF for free.
More details 6y5l6z
- Words: 1,600
- Pages: 4
Ordering number : ENN7250
Thick-Film Hybrid IC
STK412-150 Two-Channel Shift Power Supply Audio Power Amplifier ICs 150W + 150 W
Overview
Package Dimensions
The STK412-000 series are class H audio power amplifier hybrid ICs that feature a built-in shift power supply circuit. These ICs provide high efficiency audio power amplification by controlling (switching) the supply voltage supplied to the power transistors according to the detected level of the input audio signal.
unit: mm 4086A-SIP22 [STK412-150]
78.0 9.0
70.0
22 2.54
2.9 4.0
1
26.5
3.6 21.5
• Pin compatible IC series that covers power ratings from 50 W × 2 channels to 180 W × 2 channels at 0.7 or 0.8% THD, 20 Hz to 20 kHz. This allows the use of a common PCB for all output classes. • The pin arrangement is also unified with that of the three-channel STK413-000 series. This means that PCBs designed for three-channel models can also be used for two-channel models. • Miniature package — 50 W/ch to 120 W/ch (THD = 0.8%, f = 20 Hz to 20 kHz): 64 × 36.5× 8.5 mm* — 150 W/ch to 180 W/ch (THD = 0.7%, f = 20 Hz to 20 kHz): 78 × 44× 9 mm* * Not including the IC pins. • Allowable load shorted time: 0.3 s
44.0
Features
0.5
(8.33)
0.4 5.5
SANYO: SIP22
Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life- systems, aircraft’s control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein.
SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 20703AS (OT) No. 7250-1/4
STK412-150 Series Organization These products are organized into a series based on their output power. Parameter Output (20 Hz to 20 kHz) [THD]
Type No. STK412-090
STK412-000
STK412-010
STK412-020
50 W + 50 W [0.8 %]
60 W + 60 W 70 W + 70 W [0.8 %] [0.8 %]
STK412-030
STK412-040
STK412-150
STK412-170
80 W +80 W 100 W + 100 W 120 W + 120 W 150 W + 150 W 180 W + 180 W [0.8 %] [0.8 %] [0.8 %] [0.7 %] [0.7 %]
Maximum supply voltage, VH (No signal)
±60 V
±65 V
±69 V
±73 V
±80 V
±84 V
±95 V
±95 V
Maximum supply voltage, VL (No signal)
±41 V
±42 V
±44 V
±45 V
±46 V
±51 V
±61 V
±60 V
Recommended supply voltage, VH
±37 V
±39 V
±43 V
±45 V
±51 V
±54 V
±57 V
±54 V
Recommended supply voltage, VL
±27 V
±29 V
±30 V
±32 V
±34 V
±36 V
±38 V
±37 V
6Ω
4Ω
Recommended load impedance
8Ω
Package
64 mm × 36.5 mm × 8.5 mm
78 mm × 44 mm × 9 mm
Specifications Maximum Ratings at Ta = 25°C Parameter
Symbol
VH: Maximum supply voltage 1 (no signal)
Conditions
Ratings
VH max(1)
VH: Maximum supply voltage 2 (signal present) VH max(2)
Unit
±95 RL = 6 Ω or greater, 150W, 50 ms
V
±85
V
±61
V
±55
V
VL: Maximum supply voltage 1 (no signal)
VL max(1)
VL: Maximum supply voltage 2 (signal present)
VL max(2)
RL = 6 Ω or greater, 150W, 50 ms
VH-VL: Maximum supply voltage *4
VH-L max
No load
60
V
Per power transistor
1.4
°C/W
θj-c
Thermal resistance Junction temperature
Tj max
Operating IC substrate temperature
Tc max
Storage temperature
Tstg
Allowable load shorted time *3
ts
150
°C
125
°C
–30 to +125
°C
Both the Tjmax and Tcmax conditions must be met.
VH = ±57 V, VL = ±38 V, RL = 6 Ω, f = 50 Hz, PO = 150 W, one channel operating
0.3
s
Operating Characteristics at Ta = 25°C, RL = 6 Ω, Rg = 600 Ω, VG = 30 dB, VZ = 18 V, RL must be a noninductive load. Parameter
Output power
Symbol
PO
Total harmonic distortion
THD
Frequency characteristics
fL, fH
Input impedance
ri
Output noise voltage *2
VNO
Quiescent current
ICCO
Midpoint voltage
VN
Test conditions *1 VCC (V) VH = ±57 VL = ±38 VH = ±57 VL = ±38
f (Hz) 20 to 20 k
20 to 20 k
VH = ±57
VL = ±38 VH = ±68 VL = ±46
1k
Standard value
THD (%)
min
0.7
typ
max
150
150
1.0
VL = ±38 VH = ±57
PO (W)
+0 –3 dB
1.0
Unit
W
0.4
%
20 to 50 k
Hz
55
kΩ
Rg = 2.2 kΩ
1.0
mVrms
VH = ±68
No load
70
mA
VL = ±46
No load
100
mA
+70
mV
VH = ±68 VL = ±46
–70
0
Notes: *1. Unless otherwise specified, a constant-voltage power supply must be used during inspection. *2. The output noise voltage rating gives the peak value read by an averaging VTVM. However, to eliminate the influence of flicker noise from the AC primary side line, use an AC stabilized power supply (50 Hz). *3. Use the transformer power supply specified in the figure below for allowable load shorted time and output noise voltage measurements. *4. Design circuits so that (|VH| - |VL|) is always less than 40 V when switching the power supply with the load connected. *5. Set up the VL power supply with an offset voltage at power supply switching (VL - LO) of about 11V as an initial target.
No. 7250-2/4
STK412-150 DBA40C
DBA40C
10000µF
10000µF
+VH
+
+VL
+
500Ω
500Ω
+
+ 500Ω
500Ω --VH
--VL
10000µF
10000µF
Specified Transformer Power Supply (MG-250 equivalent)
Specified Transformer Power Supply (MG-200 equivalent)
Internal Equivalent Circuit 21
22
TR31 1 R31
13
Comparator TR1
TR2
D6
TR9
R4 TR6
TR21
TR11 R20
R14
TR23 R24
14
R2
C3 TR20
TR8
R6
Current Limiter for RL-Short
R23
R3
TR7 D1
D33
R12
TR22 TR24
TR10 TR12
2
D31
TR15
D32
D3
R7 TR5
R15 TR16
R16
R27
D2
16
3
C4
Current Limiter for RL-Short
15
TR13 D35
R26
R22 TR4 R5
TR14
TR18
C2 C1 TR3
D7
D34
R17 TR19 R18
R8
5
TR17 D36
R13
4
12 Comparator TR32 7 R32 SUB
6
9
8
11 10
19 N.C.
20
17
18
No. 7250-3/4
STK412-150 Sample Application Circuit
STK412-000 Series
1
2
3
4
5
6
7
8
*1
9
*1
10
*1
11
*1
12
56kΩ
13
14
15
16
17
220pF
18
N.C. 19 20
3pF
+VH +VL
100Ω /1W 100µF /100V 100µF /63V
GND 100µF /63V --VL --VH
100µF /100V
GZA 18Y 3.3kΩ /1W
GZA 18Y
22
220pF
56kΩ
2.2µF /50V
33kΩ
3pF
21
1.8kΩ 100µF /10V
1.8kΩ
1kΩ Ch.2 IN
56kΩ
100µF /10V 56kΩ
470pF 2.2µF /50V
GND 470pF Ch.1 IN
1kΩ 100µF /100V
3.3kΩ /1W
3µH Ch.2 OUT 4.7Ω
100µF /100V
100Ω /1W
3µH
0.1µF 4.7Ω /1W 4.7Ω /1W 0.1µF
GND Ch.1 OUT
4.7Ω *1:
Cement resistor, 0.1Ω, ±10% (5 W)
SUB.GND
Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer’s products or equipment. To symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer’s products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When deg equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products (including technical data, services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When deg equipment, refer to the “Delivery Specification” for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of February, 2003. Specifications and information herein are subject to change without notice. PS No. 7250-4/4
Thick-Film Hybrid IC
STK412-150 Two-Channel Shift Power Supply Audio Power Amplifier ICs 150W + 150 W
Overview
Package Dimensions
The STK412-000 series are class H audio power amplifier hybrid ICs that feature a built-in shift power supply circuit. These ICs provide high efficiency audio power amplification by controlling (switching) the supply voltage supplied to the power transistors according to the detected level of the input audio signal.
unit: mm 4086A-SIP22 [STK412-150]
78.0 9.0
70.0
22 2.54
2.9 4.0
1
26.5
3.6 21.5
• Pin compatible IC series that covers power ratings from 50 W × 2 channels to 180 W × 2 channels at 0.7 or 0.8% THD, 20 Hz to 20 kHz. This allows the use of a common PCB for all output classes. • The pin arrangement is also unified with that of the three-channel STK413-000 series. This means that PCBs designed for three-channel models can also be used for two-channel models. • Miniature package — 50 W/ch to 120 W/ch (THD = 0.8%, f = 20 Hz to 20 kHz): 64 × 36.5× 8.5 mm* — 150 W/ch to 180 W/ch (THD = 0.7%, f = 20 Hz to 20 kHz): 78 × 44× 9 mm* * Not including the IC pins. • Allowable load shorted time: 0.3 s
44.0
Features
0.5
(8.33)
0.4 5.5
SANYO: SIP22
Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life- systems, aircraft’s control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein.
SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 20703AS (OT) No. 7250-1/4
STK412-150 Series Organization These products are organized into a series based on their output power. Parameter Output (20 Hz to 20 kHz) [THD]
Type No. STK412-090
STK412-000
STK412-010
STK412-020
50 W + 50 W [0.8 %]
60 W + 60 W 70 W + 70 W [0.8 %] [0.8 %]
STK412-030
STK412-040
STK412-150
STK412-170
80 W +80 W 100 W + 100 W 120 W + 120 W 150 W + 150 W 180 W + 180 W [0.8 %] [0.8 %] [0.8 %] [0.7 %] [0.7 %]
Maximum supply voltage, VH (No signal)
±60 V
±65 V
±69 V
±73 V
±80 V
±84 V
±95 V
±95 V
Maximum supply voltage, VL (No signal)
±41 V
±42 V
±44 V
±45 V
±46 V
±51 V
±61 V
±60 V
Recommended supply voltage, VH
±37 V
±39 V
±43 V
±45 V
±51 V
±54 V
±57 V
±54 V
Recommended supply voltage, VL
±27 V
±29 V
±30 V
±32 V
±34 V
±36 V
±38 V
±37 V
6Ω
4Ω
Recommended load impedance
8Ω
Package
64 mm × 36.5 mm × 8.5 mm
78 mm × 44 mm × 9 mm
Specifications Maximum Ratings at Ta = 25°C Parameter
Symbol
VH: Maximum supply voltage 1 (no signal)
Conditions
Ratings
VH max(1)
VH: Maximum supply voltage 2 (signal present) VH max(2)
Unit
±95 RL = 6 Ω or greater, 150W, 50 ms
V
±85
V
±61
V
±55
V
VL: Maximum supply voltage 1 (no signal)
VL max(1)
VL: Maximum supply voltage 2 (signal present)
VL max(2)
RL = 6 Ω or greater, 150W, 50 ms
VH-VL: Maximum supply voltage *4
VH-L max
No load
60
V
Per power transistor
1.4
°C/W
θj-c
Thermal resistance Junction temperature
Tj max
Operating IC substrate temperature
Tc max
Storage temperature
Tstg
Allowable load shorted time *3
ts
150
°C
125
°C
–30 to +125
°C
Both the Tjmax and Tcmax conditions must be met.
VH = ±57 V, VL = ±38 V, RL = 6 Ω, f = 50 Hz, PO = 150 W, one channel operating
0.3
s
Operating Characteristics at Ta = 25°C, RL = 6 Ω, Rg = 600 Ω, VG = 30 dB, VZ = 18 V, RL must be a noninductive load. Parameter
Output power
Symbol
PO
Total harmonic distortion
THD
Frequency characteristics
fL, fH
Input impedance
ri
Output noise voltage *2
VNO
Quiescent current
ICCO
Midpoint voltage
VN
Test conditions *1 VCC (V) VH = ±57 VL = ±38 VH = ±57 VL = ±38
f (Hz) 20 to 20 k
20 to 20 k
VH = ±57
VL = ±38 VH = ±68 VL = ±46
1k
Standard value
THD (%)
min
0.7
typ
max
150
150
1.0
VL = ±38 VH = ±57
PO (W)
+0 –3 dB
1.0
Unit
W
0.4
%
20 to 50 k
Hz
55
kΩ
Rg = 2.2 kΩ
1.0
mVrms
VH = ±68
No load
70
mA
VL = ±46
No load
100
mA
+70
mV
VH = ±68 VL = ±46
–70
0
Notes: *1. Unless otherwise specified, a constant-voltage power supply must be used during inspection. *2. The output noise voltage rating gives the peak value read by an averaging VTVM. However, to eliminate the influence of flicker noise from the AC primary side line, use an AC stabilized power supply (50 Hz). *3. Use the transformer power supply specified in the figure below for allowable load shorted time and output noise voltage measurements. *4. Design circuits so that (|VH| - |VL|) is always less than 40 V when switching the power supply with the load connected. *5. Set up the VL power supply with an offset voltage at power supply switching (VL - LO) of about 11V as an initial target.
No. 7250-2/4
STK412-150 DBA40C
DBA40C
10000µF
10000µF
+VH
+
+VL
+
500Ω
500Ω
+
+ 500Ω
500Ω --VH
--VL
10000µF
10000µF
Specified Transformer Power Supply (MG-250 equivalent)
Specified Transformer Power Supply (MG-200 equivalent)
Internal Equivalent Circuit 21
22
TR31 1 R31
13
Comparator TR1
TR2
D6
TR9
R4 TR6
TR21
TR11 R20
R14
TR23 R24
14
R2
C3 TR20
TR8
R6
Current Limiter for RL-Short
R23
R3
TR7 D1
D33
R12
TR22 TR24
TR10 TR12
2
D31
TR15
D32
D3
R7 TR5
R15 TR16
R16
R27
D2
16
3
C4
Current Limiter for RL-Short
15
TR13 D35
R26
R22 TR4 R5
TR14
TR18
C2 C1 TR3
D7
D34
R17 TR19 R18
R8
5
TR17 D36
R13
4
12 Comparator TR32 7 R32 SUB
6
9
8
11 10
19 N.C.
20
17
18
No. 7250-3/4
STK412-150 Sample Application Circuit
STK412-000 Series
1
2
3
4
5
6
7
8
*1
9
*1
10
*1
11
*1
12
56kΩ
13
14
15
16
17
220pF
18
N.C. 19 20
3pF
+VH +VL
100Ω /1W 100µF /100V 100µF /63V
GND 100µF /63V --VL --VH
100µF /100V
GZA 18Y 3.3kΩ /1W
GZA 18Y
22
220pF
56kΩ
2.2µF /50V
33kΩ
3pF
21
1.8kΩ 100µF /10V
1.8kΩ
1kΩ Ch.2 IN
56kΩ
100µF /10V 56kΩ
470pF 2.2µF /50V
GND 470pF Ch.1 IN
1kΩ 100µF /100V
3.3kΩ /1W
3µH Ch.2 OUT 4.7Ω
100µF /100V
100Ω /1W
3µH
0.1µF 4.7Ω /1W 4.7Ω /1W 0.1µF
GND Ch.1 OUT
4.7Ω *1:
Cement resistor, 0.1Ω, ±10% (5 W)
SUB.GND
Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer’s products or equipment. To symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer’s products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When deg equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products (including technical data, services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When deg equipment, refer to the “Delivery Specification” for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of February, 2003. Specifications and information herein are subject to change without notice. PS No. 7250-4/4
More Documents from "Souvik Pramanick" q6d6m
Stk412-150 546o2s
December 2021 0
The Modern Review 1935 January 2n3x4w
June 2020 5
Marine Notes - Mmd Exams India And Baiscs_ Meo Class 4 Oral Questions 35k5x
December 2019 57
Netaji Dead Or Alive _ India's Biggest Cover Up Exposed 133q5o
December 2019 38
Gujarat University-t.y.bca Syllabus 6p7342
November 2019 55