Transformer Oil Testing Report.docx 361k1s

Transformer oil testing From Wikipedia, the free encyclopedia

Jump to navigationJump to search This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. Find sources: "Transformer oil testing" – news · newspapers · books · scholar · JSTOR (September 2014) (Learn how and when to remove this template message)

Transformer oil, a type of insulating and cooling oil used in transformers and other electrical equipment, needs to be tested periodically to ensure that it is still fit for purpose. This is because it tends to deteriorate over time. Testing sequences and procedures are defined by various international standards, many of them set by ASTM.[1] Testing consists of measuring breakdown voltage and other physical and chemical properties of samples of the oil, either in a laboratory or using portable test equipment on site[2].

Contents      

1Motivation for testing 2On-site testing 3Breakdown voltage testing procedure 4Types of test o 4.1International transformer oil testing standards 5See also 6References

Motivation for testing[edit] The transformer oil (insulation oil) of voltage- and current-transformers fulfills the purpose of insulating as well as cooling. Thus, the dielectric quality of transformer oil is essential to secure operation of a transformer.[3][4] As transformer oil deteriorates through aging and moisture ingress, transformer oil should, depending on economics, transformer duty and other factors, be tested periodically.[5] Power utility companies have a vested interest in periodic oil testing since transformers represent a large proportion of their total assets. Through such testing, transformers' life can be substantially increased, thus delaying new investment of replacement transformer assets.

Voltage breakdown during oil test

On-site testing[edit] Recently time-consuming testing procedures in test labs have been replaced by on-site oil testing procedures. There are various manufacturers of portable oil testers. With low weight devices in the range of 20 to 40 kg, tests up to 100 kV rms can be performed and reported on-site automatically. Some of them are even battery-powered and come with accessories.

Breakdown voltage testing procedure[edit] To assess the insulating property of dielectric transformer oil, a sample of the transformer oil is taken and its breakdown voltage is measured. The lower the resulting breakdown voltage, the poorer the quality of the transformer oil.    

 



The transformer oil is filled in the vessel of the testing device. Two standard-compliant test electrodes with a typical clearance of 2.5 mm are surrounded by the dielectric oil. A test voltage is applied to the electrodes and is continuously increased up to the breakdown voltage with a constant, standard-compliant slew rate of e.g. 2 kV/s. At a certain voltage level breakdown occurs in an electric arc, leading to a collapse of the test voltage. An instant after ignition of the arc, the test voltage is switched off automatically by the testing device. Ultra fast switch off is highly desirable, as the carbonisation due to the electric arc must be limited to keep the additional pollution as low as possible. The transformer oil testing device measures and reports the root mean square value of the breakdown voltage. After the transformer oil test is completed, the insulation oil is stirred automatically and the test sequence is performed repeatedly: typically 5 repetitions, depending on the standard. As a result the breakdown voltage is calculated as mean value of the individual measurements.

Types of test[edit]  

Color; e.g., ASTM D1500. Dielectric breakdown voltage; e.g., D 877, ASTM D1816

            

Dissolved gas analysis; e.g., ASTM D3612 Dissolved metals; e.g., ASTM D7151 Flash point, fire point; e.g., ASTM D92 Interfacial tension; e.g. D 971 Furanic compounds; e.g., ASTM D5837 Karl Fischer moisture; e.g., ASTM D1533 Liquid power factor; e.g., ASTM D924 Neutralization number; e.g., ASTM D974 Oxidation inhibitor content; e.g., ASTM D2668 Polychlorinated biphenyls content; e.g., ASTM D4059 Relative density (specific gravity); e.g., D 1298, ASTM D1524 Resistivity; e.g., ASTM D1169 Visual examination; e.g., D1524

International transformer oil testing standards[edit]               

VDE370-5/96 OVE EN60156 IEC 60156/97, ASTM1816-04-1 ASTM1816-04-2 ASTM877-02A ASTM877-02B AS1767.2.1 BS EN60156 NEN 10 156 NF EN60156 PA SEV EN60156 SABS EN60156 UNE EN60156 IS:6792 of 1972

See also[edit]  

Severity factor Electrical measurements

References[edit] 1. ^ Gill, Paul (1998). Electrical power equipment maintenance and testing. New York, NY [u.a.]: Dekker. ISBN 9780824799076. 2. ^ "Loss tangent meter in dielectric oil". www.amperis.com. 3. ^ "Transformer Oil Detoriation - Why is transformer oil purification essential?". 4. ^ Rouse, T.O. (May 1998). "Mineral insulating oil in transformers". IEEE Electrical Insulation Magazine. 14 (3): 6–16. doi:10.1109/57.675572.

5. ^ Gill, Paul (1998). Electrical power equipment maintenance and testing. New York, NY [u.a.]: Dekker. ISBN 9780824799076.

hide 

v



t e



Transformer           

Types

           

Amorphous metal transformer Austin transformer Autotransformer Buck–boost transformer Capacitor voltage transformer Distribution transformer Delta-wye transformer Energy efficient transformer Flyback transformer Grounding transformer Instrument transformer o Current transformer o Potential transformer Isolation transformer Linear variable differential transformer Pad-mounted transformer Parametric transformer Planar transformers Rotary transformer Rotary variable differential transformer Scott-T transformer Solid-state transformer Trigger transformer Variable-frequency transformer Zigzag transformer





Hybrid coil Induction coil Oudin coil Polyphase coil Repeating coil Tesla coil Trembler coil



Agbioeletric



Balun Buchholz relay Bushing Center tap Circle diagram Condition monitoring of transformers Copper loss Dissolved gas analysis Electrical insulation paper

 

Coils

  

          

Topics

             

Growler High-leg delta Induction regulator Leakage inductance Magnet wire Metadyne Open-circuit test Polarity Polychlorinated biphenyl Quadrature booster Resolver Resonant inductive coupling Severity factor Short-circuit test Stacking factor Synchro Tap changer

    

 

Manufacturers

 

Toroidal inductors and transformers Transformer oil Transformer oil testing Transformer utilization factor Vector group ABB Prolec GE Siemens TBEA

Retrieved from "https://en.wikipedia.org/w/index.php?title=Transformer_oil_testing&oldid=866495273" Categories:  

Electric transformers Electrical tests

Hidden categories:  

Articles needing additional references from September 2014 All articles needing additional references

Navigation menu Personal tools     

Not logged in Talk Contributions Create

Namespaces  

Article Talk

Variants Views   

Read Edit View history

More Search Special:Search

Go

Navigation       

Main page Contents Featured content Current events Random article Donate to Wikipedia Wikipedia store

Interaction     

Help About Wikipedia Community portal Recent changes page

Tools        

What links here Related changes file Special pages Permanent link Page information Wikidata item Cite this page

Print/export   

Create a book as PDF Printable version

Languages Add links  

This page was last edited on 30 October 2018, at 17:56 (UTC). Text is available under the Creative Commons Attribution-ShareAlike License; additional may apply. By using this site, you agree to the of Use and . Wikipedia® is a ed trademark of the Wikimedia Foundation, Inc., a nonprofit organization.

      

About Wikipedia Disclaimers Wikipedia Developers Cookie statement Mobile view

 