Ts4u Electrics All 4z5h6u
This document was ed by and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this report form. Report 3i3n4
Overview 26281t
& View Ts4u Electrics All as PDF for free.
More details 6y5l6z
- Words: 7,047
- Pages: 20
Where we are
P
Priestly Way
P
Bays 1,3,4,5 only1,3,4,5 only P Bays
P
Rutherford Centre Rutherford Centre
P
Bus Stop Bus no.10
Metana House
P
Priestly Way
Way Priestly WayPriestlyRutherford Rutherford Way Way Priestly Way
Priestly Way
M23
M23
11 J9 2011 J9 A e A20 ley Av awley Ave Craw Cr
11 11 e A20 e A20 ley Av Craw
ley Av
Craw
Gatwick Road
Gatwick Road
A23 London Rd
A23 London Rd
Fleming WayFleming Way
Manor RoyalManor Royal
P
3 Metana House 3 Metana House
The best place to get the skills you need Electrical Courses
Gatwick Road
P
Rutherford Way Gatwick Road
Radar
Rd d ondon 3 London R A23 L A2
Rutherford Way
Radar
Bus Stop Bus no.10
Rd A23 London
A23 London
Rd
We are located just ten minutes’ walk from Gatwick airport and very near the town of Crawley – both of which have excellent rail, bus and taxi connections. The nearest bus stop is at the end of our street, just 100 yards from our door. We are also easily accessible by road via the M25 and M23. We are always very happy to help arrange lodging and accommodation for customers travelling long distances to reach us.
Bus Stop Bus no.10
Fleming WayFleming Way
Bus Stop Bus no.10
Rutherford Centre
Trade Skills 4U, Unit 3, Metana House, Priestley Way, Crawley RH10 9NT 0800 856 444 8 www.tradeskills4u.co.uk [email protected]
Plug in with TS4U
“I needed the Part P and 16th edition for my job as a kitchen fitter quickly or I faced being laid off. I got exactly what I paid for with no fuss – I even enjoyed it!” Steve Camber “I’m in The Military, just going through retraining with TS4U: fantastic facility, fantastic istration and instruction. I will be going back to my resettlement officer and will onto them the high standards you guys acheive.”
Hundreds of people from all over the UK have used our electrical courses to get up to speed on the latest developments in the electrical trade. By providing the most up-to-date skills and knowledge – and the essential qualifications that go with them – we offer an unbeatable opportunity to begin or further your career as a fully qualified, practising electrician.
Ken Dickson
Our courses
Get qualifed
We offer a comprehensive range of electrical courses, from a 2-day introductory foundation course, right up to a 13-day multi-package.
To be a successful, practicing electrician, it’s essential, by law, that you have the relevant qualifications to prove your abilities. At TS4U, we can help you get exactly the qualifications you need, with the minimum of fuss.
Our courses cater to all levels of experience and ability. Whether you’re a newcomer to the electrical trade looking for basic training, or an experienced tradesperson needing to update your skills in line with recent developments – we’ve got the course for you. With practical, hands-on training in a ‘real-life’ environment from experienced instructors – we guarantee you’ll learn everything you need to take the next step in your career.
We know that a lot of busy working people don’t have the time or inclination to attend a full-time college course. That’s we offer intensive courses that enable you to get the qualifications you need as quickly as possible. Perhaps you’re just starting out in the industry and looking for that crucial first City & Guilds certificate, or maybe you need to update the qualifications you gained years ago when you were starting out – wherever you are on your career path, we can make sure you’ve got the certificate to prove it.
Call us now on 0800 856 4448 or go to www.tradeskills4u.co.uk to book your course.
“I’m a plumber and I needed this course to compliment my Corgi qualification. Thankfully I chose the right place!” Ben Grant “Best course Ive ever attended. The learning curve was spot on!.” P Marsh
“The course was recommended by a friend and I arrived knowing nothing about electrics. I now have very good skills and look forward to putting them into practice.” David Dodds
Electrical Training Courses
10-day Electrical Multi-Course This discounted multi-course package combines three essential courses, enabling anyone with previous electrical installation experience to become a competent and fully qualified Domestic Electrical Installer. Course Content
Duration
This course package includes 3 separate courses:
Three courses in 10 days. If you are unable to commit to 10 days’ training in one continuous session, you may attend the three courses separately. All three courses must be booked together to qualify for the discounted rate.
2-day Electrical Foundation Many experienced electrical installers have gaps in their skills and expertise. This practical workshop based Foundation Course aims to bridge those gaps, preparing you for the crucial Part P examination. The course includes: • Practical training of electrical theory • Basic calculations • Three phase systems • Testing 5-day Part P VRQ Qualification This classroom and workshop based course enables you to gain the essential Part P VRQ Qualification. When you as a Domestic Electrical Installer and start to self-certify your installations, this qualification certificate will be proof of your competency. 3-day City & Guilds 2382 (17th Edition) This short 17th Edition Wiring Regulations Course is classroombased with an online test that will enable you to obtain your City & Guilds Certificate 2382 – something that every practicing electrician must have.
Prerequisite Previous experience of electrical installation required. If you have little or no experience or are unsure we recommend the 13-day Electrical Multi-Course. Bookings • Call 0800 856 4448 • Visit www.tradeskills4u.co.uk • Courses start every week
“Great centre, great location, sured expectation.” Dean Shelly
Electrical Training Courses
13-day Electrical Multi-Course This discounted multi-course package combines three essential courses, enabling anyone with little or no previous electrical installation experience to become a competent and fully qualified Domestic Electrical Installer. Course Content
Duration
This course package includes 3 separate courses:
Three courses in 13 days. If you are unable to commit to 13 days’ training in one continuous session, you may attend the three courses separately. All three courses must be booked together to qualify for the discounted rate.
5-day Electrical Foundation This practical workshop Foundation Course gives you all the basic knowledge you need for the crucial Part P course. The course includes: • Ring main circuits • Basic lighting circuits • 2-way lighting circuits • 2-way lighting and intermediate circuits • Radial power circuits • Earthing and bonding procedures • Calculating cable sizes and load demands • Introduction to electrical regulations • Health and Safety • Safe isolation procedures • Three phase systems • Basic electrical calculus 5-day Part P VRQ Qualification This classroom and workshop based course enables you to gain the essential Part P VRQ Qualification. When you as a Domestic Electrical Installer and start to self-certify your installations, this qualification certificate will be proof of your competency. 3-day City & Guilds 2382 (17th edition) This short 17th Edition Wiring Regulations Course is classroombased with an online test that will enable you to obtain your City & Guilds Certificate 2382 – something that every practicing electrician must have.
Prerequisite No previous experience required. If you have some experience of electrical installation we recommend the 10-day Electrical Multi-Course. Bookings • Call 0800 856 4448 • Visit www.tradeskills4u.co.uk • Courses start every week
Electrical Training Courses
2-day Skills Update Electrical Course This course is designed to help anyone with previous electrical installation experience to fill the gaps in their working knowledge and prepare to sit the all-important Part P VRQ Qualification – a crucial part of becoming a fully qualified Domestic Electrical Installer. Course Content
Duration
Many experienced electrical installers have gaps in their skills and expertise. This course aims to bridge the gaps we most commonly encounter.
2 days’ practical and theory based intensive training.
The course offers practical training under close supervision and expert guidance plus workshop-based theory learning. It will ensure you have all the knowledge required to sit the Part P VRQ Examination – something that every practising electrician must do.
Prerequisite
The course includes: • Health and Safety • Safe isolation procedures • Three phase systems • Testing procedures • Special locations • Earthing and bonding requirements • Electrical calculus
Previous experience of electrical installation required. If you have little or no experience or unsure we recommend the 5-day Foundation Electrical Course. Bookings • Call 0800 856 4448 • Visit www.tradeskills4u.co.uk • Courses start every week
“This course more than met my expectation. Very thorough!” John Shaw
Electrical Training Courses
5-day Electrical Foundation Course This course includes all the essential training and basic knowledge needed to gain the all-important Part P VRQ Qualification – a crucial part of becoming a fully qualified Domestic Electrical Installer. Course Content
Duration
This Foundation Course offers practical installation, basic testing and inspection training under close supervision and expert guidance plus workshop-based electrical theory learning. It covers all the knowledge required to sit the Part P VRQ Examination – something that every practising electrician must do.
5 days’ intensive training.
The course includes: • Ring main circuits • Basic lighting circuits • 2-way lighting circuits • 2-way lighting and intermediate circuits • Radial power circuits • Earthing and bonding procedures • Calculating cable sizes and load demands • Introduction to electrical regulations • Health and Safety • Safe isolation procedures • Three phase systems • Electrical calculus • Practical training
Prerequisite No previous experience required. If you already have some previous experience of electrical installation we recommend the 2-day Skills Update Electrical Course. Bookings • Call 0800 856 4448 • Visit www.tradeskills4u.co.uk • Courses start every week
“The instructor was excellent – put things across well and was always patient with me.” Steve Filewood
Electrical Training Courses
Part P Domestic Installers Course, Vocationally Related Qualification This course enables anyone training as a Domestic Electrical Installer to the Part P course and obtain the VRQ Certificate – one of the essential qualifications you will need to have to professionally carrying out domestic electrical installation work. Course Content
Duration
Part P Building Regulations were introduced in 2005 as a way of ensuring that electrical installations in domestic systems are safely and properly installed. By law, anyone carrying out this kind of work must be fully competent. The Part P VRQ Certificate is your proof that you are competent to do the work.
5 days’ practical and theory based training, including online assessment.
This 5-day course will bring you up to the required safety legal standards, compliant with Part P Building Regulations. On completing the course, you will be able to as a Domestic Electrical Installer with the ability to install, inspect, test and certify your work. Put simply, it’s an essential qualification you need to do the job.
The course tests and assesses your current electrical skills and knowledge. To take this course, you must first be competent in all the skills needed to complete either the 2-day Skills Update Electrical Course or the 5-day Electrical Foundation Course. Please look at the course content on these courses. If you do not have the required skills, we strongly recommend whichever of these two courses best suits your level of experience before taking the Part P Domestic Installers Course.
The Part P VRQ Domestic Electrical Installers Level 2 Course includes: • Applicable Building Regulations • Electrical Safety legislation, regulations, standards and terminology • Pre-work survey/inspection • Safe isolation procedures • Identification of unsafe electrical situations • Earthing and bonding requirements • Electrical test procedures • Cable and component selection • Installation and replacement of electrical components • Checking the correct and safe operation of installed electrical components • Recording of electrical test results and completion of certification • Installing and/or rerouting cables • Special locations • New circuit requirements • Installing domestic lighting circuits • Maintaining domestic electrical installations • Basic understanding of 3 Phase supplies.
over
% 9pa0 ss rate
“My instructor’s down to earth manner and simple kindness immediately put me at ease. I couldn’t have done it without his patience.” Pat Walshe
Prerequisite
Bookings • Call 0800 856 4448 • Visit www.tradeskills4u.co.uk • Courses start every week
Electrical Training Courses
City & Guilds 2382, 17th Edition Course This course is designed to enable practising electricians, domestic electrical installers and other allied professionals to ensure they are competent and fully qualified in the latest IEE Wiring Regulations. Course Content
Duration
On this course, you will study the format, content and application of the Requirements for Electrical Installations BS 7671: 2008 (17th Edition).
3 days’ instruction and training, including online assessment.
The course is made up of eight units, relating to parts 1 to 7 of BS 7671, plus the 2008 Appendices. These units are: • Definitions • Assessment of general characteristics • Protection for safety • Selection and erection of equipment • Inspection and testing • Special installations or locations • Scope, object and fundamental principles • Appendices
Prerequisite
The course takes the form of classroom instruction, ending in a two-hour multiple-choice online exam. The exam is ‘open book’ meaning that you will be able to refer to the 17th edition book throughout. There is no practical training on this course.
There are no formal entry requirements needed to take this course. However, it is expected that you will have some relevant experience and basic knowledge of electrical science. If you have already completed the 16th Edition Course (since June 2001) you do not need to take this 3-day course in order to obtain the 17th Edition qualification. Instead, we recommend the City & Guilds 2382, 17th Edition Update. Bookings
“Good facility. And the instructors are in the real world” Andy McDonald
% 5 9 rate
• Call 0800 856 4448 • Visit www.tradeskills4u.co.uk • Courses start every week
Electrical Training Courses
City & Guilds 2382, 17th Edition Update This course is designed to enable practising electricians, domestic electrical installers and other allied professionals who hold their City & Guilds 16th Edition to update and enhance their understanding of IEE Wiring Regulations and ensure they are fully qualified up to the new standards of the 17th Edition. Course Content
Duration
On this course, you will upgrade your existing knowledge of IEE Wiring Regulations by studying the form, content and application of the requirements for Electrical Installations BS 7671: 2008 (17th Edition).
1 day’s instruction and training, including online assessment.
The course is made up of eight units, relating to parts 1 to 7 of BS 7671, plus the 2008 Appendices. These units are: • Definitions • Assessment of general characteristics • Protection for safety • Selection and erection of equipment • Inspection and testing • Special installations or locations • Scope, object and fundamental principles • Appendices The course aims to update you on the significant differences between the 16th and 17th editions. To do that, it will focus on the main additions and alterations that have been incorporated in the 17th Edition. There will be very little basic training involved. The course takes the form of classroom instruction, ending in a one-hour 30 question multiple-choice online exam. The exam is ‘open book’ meaning that you will be able to refer to the 17th edition book throughout. There is no practical training on this course.
99ra%te
Prerequisite To take this qualification, you must have one of the following qualifications: • City & Guilds Level 3 Certificate in the Requirements for Electrical Installations BS 7671: (2381), 16th edition • City & Guilds Level 3 Certificate in Electrotechnical Technology Installation (Building and Structures) (2330-07) • City & Guilds Level 3 Certificate in Electrotechnical Technology Electrical Maintenance (2330-08) • City & Guilds Level 3 Certificate in Electrical Installation Part Two (2360) (from January 1st 2004 onwards only) To sit this exam, you must provide evidence of your qualifications. Make sure to bring your City & Guilds Certificate with you (not a copy). You will not be able to sit the exam without it. If you have not already gained your City & Guilds 16th Edition 2318 (or recognised equivalent) you will need to take the 3-day City & Guilds 2382, 17th Edition Course. If you gained your City & Guilds 16th Edition 2318 (or recognised equivalent) before June 2001 you will need to take the 3-day City & Guilds 2382, 17th Edition Course. Bookings
“I did my 16th and it was a pleasure to come back for the 17th edition update.” Michael Marshall
• Call 0800 856 4448 • Visit www.tradeskills4u.co.uk • Courses start every week
Electrical Training Courses
City & Guilds 2392 Inspection and Testing Level 2 This qualification has been developed in conjunction with the electrical industry to provide less experienced candidates with an introduction of how to inspect and test (conduct the initial verification) of electrical installations before progressing onto the 2391-10 Level 3 Certificate in Inspection, Testing and Certification of Electrical Installations. It enables anyone new to electrical testing and inspection to obtain the qualification and skills they will need before carrying out domestic and commercial installations. Course Content
Duration
Commercial electrical testing and inspection can be a difficult subject even for experienced electricians. This course allows you to grasp the basics in a clear and straightforward way and provides you with the essential qualification you need to prove you are competent to do the job.
4 days’ instruction and training, including online assessment.
The course includes: • Preparation for initial inspection and testing • Electrical Testing
There are no formal entry requirements to take this course. It is also particularly suitable for practicing electricians or domestic installers who have not carried out inspection and testing since qualifying or who require some updated training before going onto achieve the City & Guilds 2391-10. It is expected that you will have basic knowledge of electrics and some professional experience of electrical installation. You must be aged 18 or above to sit this course.
The course includes both practical and theoretical electrical training. Assessment will be by: • A multiple choice online test covering the underpinning knowledge relating to the fundamental inspection, testing and initial verification of electrical installations, as required by BS 7671:2008 • A practical test covering the range of inspections, tests, verification and recording of information and results for a new electrical installation, as required by BS 7671:2008
Prerequisite
The course is suitable for: • Electrical installers who are new to the industry i.e. domestic Installers • Electrical installers who have not carried out inspection and testing since qualifying • Electrical installers who need extra training before sitting City & Guilds 2391 Inspection and Testing Level 3 • Professionals working in allied trades such as plumbers, kitchen fitters and landscape gardeners If you already have some experience of electrical testing and inspection, we recommend City & Guilds 2391 Inspection and Testing Level 3. Bookings • Call 0800 856 4448 • Visit www.tradeskills4u.co.uk • Courses start every week
Electrical Training Courses
City & Guilds 2391 Inspection and Testing Level 3 This course enables experienced electrical installers to obtain the qualification and skills they will need to have before carrying out commercial installations, testing and inspection. Course Content
Duration
This course provides you with the essential skills and the qualification you need to prove you are competent to carry out commercial electrical installations.
4 days’ instruction plus a half day exam and a half day assessment.
The classroom based course includes: • Introduction to inspection and testing • Testing equipment • Order of tests • Continuity of protective conductors • Insulation resistance tests • Polarity and earth electrode tests • Earth fault loop impedance tests • RCD tests • Rarely used tests & IP ratings • Recording of results • Using Guidance Note 3 • Exam preparation
Prerequisite
The course include theoretical electrical training only, if you need practical training the City & Guilds 2392 Inspection and Testing Level 2 course may be more suitable for you.
“Challenging! I ed with solid instruction from credible real world instructors.” Paul Ingles
There are no formal entry requirements to take this course. However, it is expected that you will have professional experience of electrical installation. You must be aged 18 or above to sit this course. If you have little or no experience of electrical testing and inspection, we recommend you take City & Guilds 2392 Inspection and Testing Level 2 before taking this qualification. Bookings • Call 0800 856 4448 • Visit www.tradeskills4u.co.uk • Courses start every week
Electrical Training Courses
City & Guilds 2330 Electrotechnical Training Level 2 If you want to be an electrician, this course is for you. It enables you to gain the practical skills and knowledge – and the qualification – you need to get started. Course Content
Duration
This course introduces you to the basic and fundamental aspects of an electrician’s work in a clear and straightforward way, and provides you with the essential qualification that you need to get started – the Level 2 Certificate in Electrical Technology 2330.
Intensive 10-week course, held over a 20-week period. To enable you to fit this demanding course into your busy schedule, course sessions are held on a ‘two weeks on, two weeks off’ basis.
To gain the qualification, you must successfully assessments in a series of basic courses, split into four units. The courses are: Unit 1: Working effectively and safely in the electrotechnical environment • Safety • Legal duties • PPE • Electrical specialisms • Fire extinguishers and warning signs • Electric shock and isolation • Accident and emergency procedures Unit 2: Principles of electrotechnology • Identify SI units • Basic mechanics • Resistance • Power generation • Conductors and insulators • Electrons and charge • Series and parallel circuits • Transformers • Shock protection • Electrical systems Unit 3: Application of health principles • Risk control • Dealing with information • Resistance • Delta connections • Earth fault
and safety and electrical • Emergency switching • Relays • Three phase systems • Protective devices • Over currents
Unit 4: Installation (Buildings & Structures) • Electricity at work regulations • Structure of BS7671 • Codes of practice • Wiring systems • Cable calculations • Special locations • Work planning If you are keen to specialise, you can also choose to focus on one of a range of relevant topics, including: • Installation • Maintenance • Instrumentation • building This course is open to any age. If you are aged 16 to 25, it can form part of an apprenticeship that allows you to earn as you learn. Alternatively, once you have understood the basics, gained your qualification and found a job as an electrician, you’re ready to take an NVQ relevant to our chosen specialist area. However you choose to use this course, it’s an essential stepping-stone to your new career as a fully qualified electrician. The course content features practical and theory learning, with online exams and practical assessments.
Although designed to cater for people of all ages, the flexibility of the course makes it especially useful for mature students with family, work and other commitments who are unable or unwilling to attend college for the duration of a full academic year. Prerequisite There are no formal entry requirements to take this course and no previous experience or qualifications are needed. The course is suitable for: • Anyone wishing to begin a career as an electrician • Anyone currently following the Electrical Modern Apprenticeship programmes • Anyone wishing to go on to study for an N/SVQ in Electrical Technology Bookings • Call 0800 856 4448 • Visit www.tradeskills4u.co.uk • Courses start every week
Electrical Training Courses
City & Guilds 2330 Electrotechnical Training Level 3 This course enables anyone with previous electrical experience to gain the City & Guilds 2330 Level 3 Certificate in electrotechnical technology – crucial proof that you are fully qualified and competent to do the job. Course Content
Duration
This course is the next step for any experienced electrician wishing to improve their qualifications – and the logical progression for anyone who has already gained the City & Guilds 2330 Level 2 or 2360 Part 1 qualifications.
Intensive 6-week course, held over a 12-week period. To enable you to fit this demanding course into your busy schedule, course sessions are held on a ‘two weeks on, two weeks off’ basis.
The course covers the following: • Level 3 Certificate in electrotechnical technology – installation (buildings and structures) • Theory and practical based training, including an online, multiple-choice exam and two practical assessments Alternatively, you can use this course to add to the knowledge and understanding you will need in order to go on to take an electrotechnical NVQ. However you choose to use this course, it’s an essential steppingstone to furthering your career as a fully qualified electrician.
Although designed to cater for people of all ages, the flexibility of the course makes it especially useful for mature students with family, work and other commitments who are unable or unwilling to attend college for the duration of a full academic year. Prerequisite To take this course, you will need to have relevant electrical experience. That may be any of the following: • You may have practical experience from your current or previous job, for example as an electrical maintenance engineer • You may have the City & Guilds 2330 Level 2 qualification or 2360 Part 1 qualification • If you are aged 16 to 25, this course can form part of an Modern Electrical Apprenticeship programme that allows you to earn as you learn Bookings • Call 0800 856 4448 • Visit www.tradeskills4u.co.uk • Courses start every week
Electrical Training Courses
City & Guilds 2377 PAT Testing This package of two courses enables practicing electrical professionals to obtain the qualification and skills they will need before carrying out PAT testing on commercial electrical appliances. Course Content
Duration
Every item of electrical equipment in a commercial environment – from kettles to computers – must be PAT tested for safety and marked as safe.
• City & Guilds 2377-12 only: 1 day, including online assessment • City & Guilds 2377-11 only: 1 day, including online assessment • Both courses taken together: 2 days, including online assessment
This package consists of two City & Guilds courses that will provide you with the essential skills and qualifications you need to prove that you are competent to carry out PAT testing. The courses may be taken individually or together.
Courses can be taken separately or together, depending on your requirements.
The courses are: City & Guilds 2377-11 Management of Electrical Equipment Maintenance This course includes: • Law and scope of relevant legislation • Types, use and testing of electrical equipment • Categories, frequency and practicalities of PAT testing • Procedures, documentation and responsibility • Identify training required for PAT testing • Appropriate test instruments and how they are used City & Guilds 2377-12 Inspection and Testing of electrical Equipment This course includes: • Electrical safety • Regulations role and responsibilities • Insulation and earthing • Classification of appliances • Preliminary inspection, test precautions • Using a portable appliance tester • Essential tests • Optional tests • Labelling tests • Reporting and recording results • Implementing a test programme • Practical assessment Each course includes practical training and a one-hour exam of 30 questions.
“My PAT testing qualification has turned out to be a nice little earner.” Richard Yorke
Prerequisite There are no formal entry requirements to take this course. However, it is expected that you will have some experience of electrical installation. If you do not the 5 day Foundation Course will be useful to you. Before taking this course you will need to read the reference book Codes of Practice for In-Service Inspection and testing of Electrical Equipment 3rd edition (ISBN 978 0 86341 833 4) – available from us, from www.theeit.org or from good electrical suppliers. Bookings • Call 0800 856 4448 • Visit www.tradeskills4u.co.uk • Courses start every week
Price List Our wide range of fantastic courses means we’re bound to have the one you need. Courses start every week and your place can be secured with a small deposit. Our very reasonable prices include VAT and the use of all tools and materials. Call 0800 856 4448 or visit www.tradeskills4u.co.uk to book your place online now. 10-day Electrical Multi-Course 13-day Electrical Multi-Course 2-day Skills Update Electrical Course 5-day Electrical Foundation Course Part P Domestic Installers Course
Plastering
Bricklaying
Electrical
City & Guilds 2382, 17th Edition Course City & Guilds 2382, 17th Edition Update City & Guilds 2392 Inspection and Testing Level 2 City & Guilds 2391 Inspection and Testing Level 3 City & Guilds 2377 PAT Testing – City & Guilds 2377-12 only – City & Guilds 2377-11 only – Both courses booked together City & Guilds 2330 Electrotechnical Training Level 2 City & Guilds 2330 Electrotechnical Training Level 3 5-day Foundation Bricklaying Course 5-day House Construction Course 5-day Hard Landscaping Course City & Guilds 6217 Bricklaying Course
2 Weekends Bricklaying Course 5-day Foundation Plastering Course 10-day Intermediate Plastering Course City & Guilds 6217 Plastering Course
2 Weekends Plastering Course 5-day Foundation Tiling Course 10-day Intermediate Tiling Course
Tiling
4-week Advanced Tiling Course Weekend Tiling Course DIY Plastering Course
DIY
DIY Bricklaying Course DIY Electrical Course DIY Tiling Course
£1,485 Discounted rate, applies if all three courses are booked together. £1,699 Discounted rate, applies if all three courses are booked together. £225 £449 £785 Includes registration, assessments and certification. An initial deposit of just £500 secures your place on the course. £495 Includes instruction and exam fees. An initial deposit of just £150 secures your place on the course. £175 Includes instruction and exam fees. £525 Includes registration, assessments and certification. £595 Includes registration, assessments and certification.
£225 £199 £300 £3,995 Ask us to find out more about pay as you go options. £2,995 Ask us to find out more about pay as you go options. £350 Includes use of all tools and materials. An initial deposit of just £150 secures your place on the course. £350 Includes use of all tools and materials. £350 £2,295 An initial deposit of just £500 secures your place on the course. This is followed by six weekly instalments of approximately £299 during the course – an easy way to spread the cost. £350 Includes use of all tools and materials. £325 Includes use of all plastering tools and materials. An initial deposit of just £150 secures your place on the course. £350 Includes use of all plastering tools and materials. £2,295 An initial deposit of just £500 secures your place on the course. This is followed by six weekly instalments of approximately £299 during the course – an easy way to spread the cost. £325 Includes use of all plastering tools and materials. £350 Includes use of all tiling tools and materials. An initial deposit of just £150 secures your place on the course. £750 Includes use of all tiling tools and materials. An initial deposit of just £150 secures your place on the course. £1,500 Includes use of all tiling tools and materials. An initial deposit of just £500 secures your place on the course. £350 Includes use of all tiling tools and materials. £325 Includes use of all plastering tools and materials. An initial deposit of just £150 secures your place on the course. £350 Includes use of all bricklaying tools and materials. An initial deposit of just £150 secures your place on the course. £449 £350 Includes use of all tiling tools and materials. An initial deposit of just £150 secures your place on the course.
Prices correct at time of printing and are subject to amendment.
Other courses
DIY
Tiling
Plastering
Bricklaying
Our wide range of fantastic courses means we’re bound to have the one you need. Courses start every week and your place can be secured with a small deposit. Our very reasonable prices include VAT and the use of all tools and materials. Call 0800 856 4448 or visit www.tradeskills4u.co.uk to book your place online now. 5-day Foundation Bricklaying Course
This course includes the essential training and knowledge needed to learn the basics of bricklaying.
5-day House Construction Course
This course includes the essential training and knowledge needed to learn the basics of house construction bricklaying.
5-day Hard Landscaping Course
This course includes the essential training and knowledge needed to learn the basics of bricklaying for outdoor projects.
City & Guilds 6217 Bricklaying Course
This course enables anyone who wishes to become a bricklayer to obtain the qualification and skills they will need in order to begin bricklaying professionally.
2 Weekends Bricklaying Course
This course includes all the essential training and knowledge needed to learn the basics of bricklaying.
5-day Foundation Plastering Course
This course includes all the essential training and knowledge needed to learn the basics of plastering.
10-day Intermediate Plastering Course
This course enables anyone with a basic knowledge of plastering to boost their skills to professional level easily and quickly.
City & Guilds 6217 Plastering Course
This course enables anyone who wishes to become a plasterer to obtain the qualification and skills they will need in order to begin plastering professionally.
2 Weekends Plastering Course
This course includes all the essential training and knowledge needed to learn the basics of plastering. Or add plastering to your DIY skills.
5-day Foundation Tiling Course
This course includes all the essential training and knowledge needed to learn the basics of tiling.
10-day Intermediate Tiling Course
This course enables anyone with a basic knowledge of tiling to boost their skills to professional level easily and quickly.
4-week Advanced Tiling Course
This course provides the whole skills-package needed to begin a career in tiling.
Weekend Tiling Course
This course includes all the essential training and knowledge needed to learn the basics of tiling.
DIY Plastering Course
This course is the perfect place to start if you want to gain all the expertise needed to carry out your own plastering projects around the home.
DIY Bricklaying Course
This course is the perfect place to start if you want to gain all the expertise needed to carry out your own bricklaying projects around the home.
DIY Electrical Course
This course is the perfect place to start if you want to gain all the expertise needed to carry out your own electrical projects around the home.
DIY Tiling Course
This course is the perfect place to start if you want to gain all the expertise needed to carry out your own tiling projects around the home.
The best place to get the skills you need
Trade Skills 4U, Unit 3, Metana House, Priestley Way, Crawley RH10 9NT 0800 856 444 8 www.tradeskills4u.co.uk [email protected]
Corporate Customers
Your customers expect your workforce to have the most up to date skills and qualifications. Trade Skills 4U can help make sure every member of your team has all the know-how they need to do the job right. Perhaps your team are highly experienced but simply lack the formal qualifications that are required by law. We can fix that in just a few days by helping them gain the relevant certificates they need to prove their competence. Or maybe you’d like your employees to gain new skills and expand the service you offer your customers. Our flexible training courses can help your team to learn vital new skills up to the highest standards. Our intensive courses last from two days to two weeks and ensure that your employees get the skills they need fast, without having to take long breaks from work commitments. And we get results, too. All our instructors are hugely experienced in their fields and operate from the biggest and best equipped training facility in the UK. It all adds up to an unbeatable package that consistently out-performs all competitors. Whatever your requirements, no job is too tough for us. To find out more call Trade Skills 4U on 0800 856 4448. We’ll be happy to hear from you.
“Very good course, full of relevant information in a relaxed atmosphere.”
“Best Course I’ve ever attended, learning curve spot on!”
Terry Ward
P Marsh
“Trade Skills 4U continues to perform well, delivering excellent quality EAL electrical qualifications.”” EAL Inspector (EV)
Accommodation Our customers come to use from all corners of the country. Some even come from the Scottish Isles or Europe. Being so close to Gatwick Airport, not only is air travel easy but there are many providers of short term accommodation to choose from. We have linked up with many suitable, sensibly priced providers of accommodation for you. We have personally inspected them and constantly monitor on the quality of service they offer. Also, many offer a free door to door shuttle service – check out the listings below. If you need any assistance booking, give us a call – we’ll be happy to help. The Corner House Hotel
Travel Lodge Hotel
72 Massetts Road, Horley Tel: 01293 784574
Church Road, Lowfield Heath Tel: 0870 191 1531
Hotel/B&B. Transport to and from the end of our road for free (max 10 mins). Breakfast included. Lovely old Edwardian house. Restaurant/bar/parking facilities. Standard single room will full English breakfast – £34. Single en suite room – £42. Double standard room – £52. Double en suite room – £62
5 minutes away. No breakfast. Booking in advance can be as little as £26 per night rising to £45. If booking on the day, ask.
Oakhurst B&B Oakhurst, Radford Road, Tinsley Green, Crawley Tel: 01293 882425
Thetford B&B Brookhill Road, Copthorne Tel: 01342 719809/07949 261221 Full English £35 per night. Transport included.
Used by airline staff. Ask about rates when you call. Free transport to and from training centre.
Masslink Guest House
Single room – £30. Single en suite room – £35
70 Massetts Road, Horley Tel: 01293 785798
Oaklands Farm House
Single room – £27 (£29.50 with breakfast). Twin room – £29-£31.
Oaklands Farm, Radford Road Tel: 01293 887863 5 minutes away. From £36 per night. Deals available if staying for a few nights – ask.
Gatwick Gable End Guest House 23 Church Road, Horley Tel: 01293 783679 Single room – £45
The Manor House B&B Tel: 01293 512298 Family run B&B. Single room not en suite – £30. Single en suite – £40. Double or twin room en suite – £50.
Castle Lodge Guest House 28 Massetts Road, Horley Tel: 01293 783200 Single room with en suite facilities – £35.
and Conditions •A non-refundable deposit of £150 for each course week is required to reserve your space, with the balance due 14 days before the start date of your course. •F or Electrical VRQ Domestic Installers course (Part P) or City & Guild courses a deposit of £500 is payable. •F or City and Guilds 2330 Level 2 Certificate in Electrotechnical Technology a deposit of £1000 is required, the 2330 Level 3 a £750 deposit applies. •P ayment can be made by cheque, credit/debit card or BACS transfer. Cheques to be made payable to Trade Skills 4U.
• It is your responsibility to attend and complete the course. If you fail to attend all the days of your course or are consistently late, Trade Skills 4U reserves the right to ask you to leave the course with no refund of course fees. • Please ensure that you are able to attend the complete course, as once your course has started, it cannot be completed at a later date. • Trade Skills 4U reserves the right to alter booking arrangements if necessary and has the right to refuse any application.
•A letter confirming the start date of your course will be sent on receipt of your booking form.
• Trade Skills 4U cannot be held responsible for accommodation. Any information provided is to assist in your search for accommodation. You are responsible for your own booking and payment.
•T he fee covers the use of all tools and materials required for your course. It does not include text books, note books or writing materials.
• If you lose your original and require a copy of an invoice/ receipt/confirmation letter, a £10 istration fee will be charged.
• You will be required to bring protective hard boots and work wear on the all bricklaying and City & Guilds Plastering Courses.
• Candidates agree to comply with relevant Trade Skills 4U health and safety policies and procedures at all times during the course.
•P rotective boots are advised for electrical practical workshop courses.
• Where any candidate does not comply with a specific request, that candidate will be asked to leave the course immediately with no refund of course fees.
•P rotective gloves, glasses and ear protection, if required, will be provided by Trade Skills 4U to use free of charge during the course. •C ancellation of your course: fees excluding deposits are refundable if written cancellation is received at least 21 days prior to your course start date, otherwise the full fee becomes payable. • If you are unable to attend due to exceptional unavoidable circumstances, a new date may be offered at the discretion of Trade Skills 4U. •S hould you have to change your course date you will be charged an istration Fee of £25, provided we have at least 21 days notice. The deposit remains non-refundable. You can only request to move your course once.
Complaints •W e ask that you notify us immediately of any complaint and every effort will be made to address this in a timely manner. •A t the end of each course you will be provided with a form – we encourage you to complete this. • If you fail to notify us of any problem it may seriously affect any right you may have to compensation.
• Any candidate misbehaving, or acting in a way that would be an impediment to other course candidates will be asked to leave the course immediately with no refund of course fees. • Any candidate not complying with Trade Skills 4U equal opportunities policy will be asked to leave the course immediately with no refund of course fees. • All candidates attending any course with Trade Skills 4U agree to be bound by these .
P
Priestly Way
P
Bays 1,3,4,5 only1,3,4,5 only P Bays
P
Rutherford Centre Rutherford Centre
P
Bus Stop Bus no.10
Metana House
P
Priestly Way
Way Priestly WayPriestlyRutherford Rutherford Way Way Priestly Way
Priestly Way
M23
M23
11 J9 2011 J9 A e A20 ley Av awley Ave Craw Cr
11 11 e A20 e A20 ley Av Craw
ley Av
Craw
Gatwick Road
Gatwick Road
A23 London Rd
A23 London Rd
Fleming WayFleming Way
Manor RoyalManor Royal
P
3 Metana House 3 Metana House
The best place to get the skills you need Electrical Courses
Gatwick Road
P
Rutherford Way Gatwick Road
Radar
Rd d ondon 3 London R A23 L A2
Rutherford Way
Radar
Bus Stop Bus no.10
Rd A23 London
A23 London
Rd
We are located just ten minutes’ walk from Gatwick airport and very near the town of Crawley – both of which have excellent rail, bus and taxi connections. The nearest bus stop is at the end of our street, just 100 yards from our door. We are also easily accessible by road via the M25 and M23. We are always very happy to help arrange lodging and accommodation for customers travelling long distances to reach us.
Bus Stop Bus no.10
Fleming WayFleming Way
Bus Stop Bus no.10
Rutherford Centre
Trade Skills 4U, Unit 3, Metana House, Priestley Way, Crawley RH10 9NT 0800 856 444 8 www.tradeskills4u.co.uk [email protected]
Plug in with TS4U
“I needed the Part P and 16th edition for my job as a kitchen fitter quickly or I faced being laid off. I got exactly what I paid for with no fuss – I even enjoyed it!” Steve Camber “I’m in The Military, just going through retraining with TS4U: fantastic facility, fantastic istration and instruction. I will be going back to my resettlement officer and will onto them the high standards you guys acheive.”
Hundreds of people from all over the UK have used our electrical courses to get up to speed on the latest developments in the electrical trade. By providing the most up-to-date skills and knowledge – and the essential qualifications that go with them – we offer an unbeatable opportunity to begin or further your career as a fully qualified, practising electrician.
Ken Dickson
Our courses
Get qualifed
We offer a comprehensive range of electrical courses, from a 2-day introductory foundation course, right up to a 13-day multi-package.
To be a successful, practicing electrician, it’s essential, by law, that you have the relevant qualifications to prove your abilities. At TS4U, we can help you get exactly the qualifications you need, with the minimum of fuss.
Our courses cater to all levels of experience and ability. Whether you’re a newcomer to the electrical trade looking for basic training, or an experienced tradesperson needing to update your skills in line with recent developments – we’ve got the course for you. With practical, hands-on training in a ‘real-life’ environment from experienced instructors – we guarantee you’ll learn everything you need to take the next step in your career.
We know that a lot of busy working people don’t have the time or inclination to attend a full-time college course. That’s we offer intensive courses that enable you to get the qualifications you need as quickly as possible. Perhaps you’re just starting out in the industry and looking for that crucial first City & Guilds certificate, or maybe you need to update the qualifications you gained years ago when you were starting out – wherever you are on your career path, we can make sure you’ve got the certificate to prove it.
Call us now on 0800 856 4448 or go to www.tradeskills4u.co.uk to book your course.
“I’m a plumber and I needed this course to compliment my Corgi qualification. Thankfully I chose the right place!” Ben Grant “Best course Ive ever attended. The learning curve was spot on!.” P Marsh
“The course was recommended by a friend and I arrived knowing nothing about electrics. I now have very good skills and look forward to putting them into practice.” David Dodds
Electrical Training Courses
10-day Electrical Multi-Course This discounted multi-course package combines three essential courses, enabling anyone with previous electrical installation experience to become a competent and fully qualified Domestic Electrical Installer. Course Content
Duration
This course package includes 3 separate courses:
Three courses in 10 days. If you are unable to commit to 10 days’ training in one continuous session, you may attend the three courses separately. All three courses must be booked together to qualify for the discounted rate.
2-day Electrical Foundation Many experienced electrical installers have gaps in their skills and expertise. This practical workshop based Foundation Course aims to bridge those gaps, preparing you for the crucial Part P examination. The course includes: • Practical training of electrical theory • Basic calculations • Three phase systems • Testing 5-day Part P VRQ Qualification This classroom and workshop based course enables you to gain the essential Part P VRQ Qualification. When you as a Domestic Electrical Installer and start to self-certify your installations, this qualification certificate will be proof of your competency. 3-day City & Guilds 2382 (17th Edition) This short 17th Edition Wiring Regulations Course is classroombased with an online test that will enable you to obtain your City & Guilds Certificate 2382 – something that every practicing electrician must have.
Prerequisite Previous experience of electrical installation required. If you have little or no experience or are unsure we recommend the 13-day Electrical Multi-Course. Bookings • Call 0800 856 4448 • Visit www.tradeskills4u.co.uk • Courses start every week
“Great centre, great location, sured expectation.” Dean Shelly
Electrical Training Courses
13-day Electrical Multi-Course This discounted multi-course package combines three essential courses, enabling anyone with little or no previous electrical installation experience to become a competent and fully qualified Domestic Electrical Installer. Course Content
Duration
This course package includes 3 separate courses:
Three courses in 13 days. If you are unable to commit to 13 days’ training in one continuous session, you may attend the three courses separately. All three courses must be booked together to qualify for the discounted rate.
5-day Electrical Foundation This practical workshop Foundation Course gives you all the basic knowledge you need for the crucial Part P course. The course includes: • Ring main circuits • Basic lighting circuits • 2-way lighting circuits • 2-way lighting and intermediate circuits • Radial power circuits • Earthing and bonding procedures • Calculating cable sizes and load demands • Introduction to electrical regulations • Health and Safety • Safe isolation procedures • Three phase systems • Basic electrical calculus 5-day Part P VRQ Qualification This classroom and workshop based course enables you to gain the essential Part P VRQ Qualification. When you as a Domestic Electrical Installer and start to self-certify your installations, this qualification certificate will be proof of your competency. 3-day City & Guilds 2382 (17th edition) This short 17th Edition Wiring Regulations Course is classroombased with an online test that will enable you to obtain your City & Guilds Certificate 2382 – something that every practicing electrician must have.
Prerequisite No previous experience required. If you have some experience of electrical installation we recommend the 10-day Electrical Multi-Course. Bookings • Call 0800 856 4448 • Visit www.tradeskills4u.co.uk • Courses start every week
Electrical Training Courses
2-day Skills Update Electrical Course This course is designed to help anyone with previous electrical installation experience to fill the gaps in their working knowledge and prepare to sit the all-important Part P VRQ Qualification – a crucial part of becoming a fully qualified Domestic Electrical Installer. Course Content
Duration
Many experienced electrical installers have gaps in their skills and expertise. This course aims to bridge the gaps we most commonly encounter.
2 days’ practical and theory based intensive training.
The course offers practical training under close supervision and expert guidance plus workshop-based theory learning. It will ensure you have all the knowledge required to sit the Part P VRQ Examination – something that every practising electrician must do.
Prerequisite
The course includes: • Health and Safety • Safe isolation procedures • Three phase systems • Testing procedures • Special locations • Earthing and bonding requirements • Electrical calculus
Previous experience of electrical installation required. If you have little or no experience or unsure we recommend the 5-day Foundation Electrical Course. Bookings • Call 0800 856 4448 • Visit www.tradeskills4u.co.uk • Courses start every week
“This course more than met my expectation. Very thorough!” John Shaw
Electrical Training Courses
5-day Electrical Foundation Course This course includes all the essential training and basic knowledge needed to gain the all-important Part P VRQ Qualification – a crucial part of becoming a fully qualified Domestic Electrical Installer. Course Content
Duration
This Foundation Course offers practical installation, basic testing and inspection training under close supervision and expert guidance plus workshop-based electrical theory learning. It covers all the knowledge required to sit the Part P VRQ Examination – something that every practising electrician must do.
5 days’ intensive training.
The course includes: • Ring main circuits • Basic lighting circuits • 2-way lighting circuits • 2-way lighting and intermediate circuits • Radial power circuits • Earthing and bonding procedures • Calculating cable sizes and load demands • Introduction to electrical regulations • Health and Safety • Safe isolation procedures • Three phase systems • Electrical calculus • Practical training
Prerequisite No previous experience required. If you already have some previous experience of electrical installation we recommend the 2-day Skills Update Electrical Course. Bookings • Call 0800 856 4448 • Visit www.tradeskills4u.co.uk • Courses start every week
“The instructor was excellent – put things across well and was always patient with me.” Steve Filewood
Electrical Training Courses
Part P Domestic Installers Course, Vocationally Related Qualification This course enables anyone training as a Domestic Electrical Installer to the Part P course and obtain the VRQ Certificate – one of the essential qualifications you will need to have to professionally carrying out domestic electrical installation work. Course Content
Duration
Part P Building Regulations were introduced in 2005 as a way of ensuring that electrical installations in domestic systems are safely and properly installed. By law, anyone carrying out this kind of work must be fully competent. The Part P VRQ Certificate is your proof that you are competent to do the work.
5 days’ practical and theory based training, including online assessment.
This 5-day course will bring you up to the required safety legal standards, compliant with Part P Building Regulations. On completing the course, you will be able to as a Domestic Electrical Installer with the ability to install, inspect, test and certify your work. Put simply, it’s an essential qualification you need to do the job.
The course tests and assesses your current electrical skills and knowledge. To take this course, you must first be competent in all the skills needed to complete either the 2-day Skills Update Electrical Course or the 5-day Electrical Foundation Course. Please look at the course content on these courses. If you do not have the required skills, we strongly recommend whichever of these two courses best suits your level of experience before taking the Part P Domestic Installers Course.
The Part P VRQ Domestic Electrical Installers Level 2 Course includes: • Applicable Building Regulations • Electrical Safety legislation, regulations, standards and terminology • Pre-work survey/inspection • Safe isolation procedures • Identification of unsafe electrical situations • Earthing and bonding requirements • Electrical test procedures • Cable and component selection • Installation and replacement of electrical components • Checking the correct and safe operation of installed electrical components • Recording of electrical test results and completion of certification • Installing and/or rerouting cables • Special locations • New circuit requirements • Installing domestic lighting circuits • Maintaining domestic electrical installations • Basic understanding of 3 Phase supplies.
over
% 9pa0 ss rate
“My instructor’s down to earth manner and simple kindness immediately put me at ease. I couldn’t have done it without his patience.” Pat Walshe
Prerequisite
Bookings • Call 0800 856 4448 • Visit www.tradeskills4u.co.uk • Courses start every week
Electrical Training Courses
City & Guilds 2382, 17th Edition Course This course is designed to enable practising electricians, domestic electrical installers and other allied professionals to ensure they are competent and fully qualified in the latest IEE Wiring Regulations. Course Content
Duration
On this course, you will study the format, content and application of the Requirements for Electrical Installations BS 7671: 2008 (17th Edition).
3 days’ instruction and training, including online assessment.
The course is made up of eight units, relating to parts 1 to 7 of BS 7671, plus the 2008 Appendices. These units are: • Definitions • Assessment of general characteristics • Protection for safety • Selection and erection of equipment • Inspection and testing • Special installations or locations • Scope, object and fundamental principles • Appendices
Prerequisite
The course takes the form of classroom instruction, ending in a two-hour multiple-choice online exam. The exam is ‘open book’ meaning that you will be able to refer to the 17th edition book throughout. There is no practical training on this course.
There are no formal entry requirements needed to take this course. However, it is expected that you will have some relevant experience and basic knowledge of electrical science. If you have already completed the 16th Edition Course (since June 2001) you do not need to take this 3-day course in order to obtain the 17th Edition qualification. Instead, we recommend the City & Guilds 2382, 17th Edition Update. Bookings
“Good facility. And the instructors are in the real world” Andy McDonald
% 5 9 rate
• Call 0800 856 4448 • Visit www.tradeskills4u.co.uk • Courses start every week
Electrical Training Courses
City & Guilds 2382, 17th Edition Update This course is designed to enable practising electricians, domestic electrical installers and other allied professionals who hold their City & Guilds 16th Edition to update and enhance their understanding of IEE Wiring Regulations and ensure they are fully qualified up to the new standards of the 17th Edition. Course Content
Duration
On this course, you will upgrade your existing knowledge of IEE Wiring Regulations by studying the form, content and application of the requirements for Electrical Installations BS 7671: 2008 (17th Edition).
1 day’s instruction and training, including online assessment.
The course is made up of eight units, relating to parts 1 to 7 of BS 7671, plus the 2008 Appendices. These units are: • Definitions • Assessment of general characteristics • Protection for safety • Selection and erection of equipment • Inspection and testing • Special installations or locations • Scope, object and fundamental principles • Appendices The course aims to update you on the significant differences between the 16th and 17th editions. To do that, it will focus on the main additions and alterations that have been incorporated in the 17th Edition. There will be very little basic training involved. The course takes the form of classroom instruction, ending in a one-hour 30 question multiple-choice online exam. The exam is ‘open book’ meaning that you will be able to refer to the 17th edition book throughout. There is no practical training on this course.
99ra%te
Prerequisite To take this qualification, you must have one of the following qualifications: • City & Guilds Level 3 Certificate in the Requirements for Electrical Installations BS 7671: (2381), 16th edition • City & Guilds Level 3 Certificate in Electrotechnical Technology Installation (Building and Structures) (2330-07) • City & Guilds Level 3 Certificate in Electrotechnical Technology Electrical Maintenance (2330-08) • City & Guilds Level 3 Certificate in Electrical Installation Part Two (2360) (from January 1st 2004 onwards only) To sit this exam, you must provide evidence of your qualifications. Make sure to bring your City & Guilds Certificate with you (not a copy). You will not be able to sit the exam without it. If you have not already gained your City & Guilds 16th Edition 2318 (or recognised equivalent) you will need to take the 3-day City & Guilds 2382, 17th Edition Course. If you gained your City & Guilds 16th Edition 2318 (or recognised equivalent) before June 2001 you will need to take the 3-day City & Guilds 2382, 17th Edition Course. Bookings
“I did my 16th and it was a pleasure to come back for the 17th edition update.” Michael Marshall
• Call 0800 856 4448 • Visit www.tradeskills4u.co.uk • Courses start every week
Electrical Training Courses
City & Guilds 2392 Inspection and Testing Level 2 This qualification has been developed in conjunction with the electrical industry to provide less experienced candidates with an introduction of how to inspect and test (conduct the initial verification) of electrical installations before progressing onto the 2391-10 Level 3 Certificate in Inspection, Testing and Certification of Electrical Installations. It enables anyone new to electrical testing and inspection to obtain the qualification and skills they will need before carrying out domestic and commercial installations. Course Content
Duration
Commercial electrical testing and inspection can be a difficult subject even for experienced electricians. This course allows you to grasp the basics in a clear and straightforward way and provides you with the essential qualification you need to prove you are competent to do the job.
4 days’ instruction and training, including online assessment.
The course includes: • Preparation for initial inspection and testing • Electrical Testing
There are no formal entry requirements to take this course. It is also particularly suitable for practicing electricians or domestic installers who have not carried out inspection and testing since qualifying or who require some updated training before going onto achieve the City & Guilds 2391-10. It is expected that you will have basic knowledge of electrics and some professional experience of electrical installation. You must be aged 18 or above to sit this course.
The course includes both practical and theoretical electrical training. Assessment will be by: • A multiple choice online test covering the underpinning knowledge relating to the fundamental inspection, testing and initial verification of electrical installations, as required by BS 7671:2008 • A practical test covering the range of inspections, tests, verification and recording of information and results for a new electrical installation, as required by BS 7671:2008
Prerequisite
The course is suitable for: • Electrical installers who are new to the industry i.e. domestic Installers • Electrical installers who have not carried out inspection and testing since qualifying • Electrical installers who need extra training before sitting City & Guilds 2391 Inspection and Testing Level 3 • Professionals working in allied trades such as plumbers, kitchen fitters and landscape gardeners If you already have some experience of electrical testing and inspection, we recommend City & Guilds 2391 Inspection and Testing Level 3. Bookings • Call 0800 856 4448 • Visit www.tradeskills4u.co.uk • Courses start every week
Electrical Training Courses
City & Guilds 2391 Inspection and Testing Level 3 This course enables experienced electrical installers to obtain the qualification and skills they will need to have before carrying out commercial installations, testing and inspection. Course Content
Duration
This course provides you with the essential skills and the qualification you need to prove you are competent to carry out commercial electrical installations.
4 days’ instruction plus a half day exam and a half day assessment.
The classroom based course includes: • Introduction to inspection and testing • Testing equipment • Order of tests • Continuity of protective conductors • Insulation resistance tests • Polarity and earth electrode tests • Earth fault loop impedance tests • RCD tests • Rarely used tests & IP ratings • Recording of results • Using Guidance Note 3 • Exam preparation
Prerequisite
The course include theoretical electrical training only, if you need practical training the City & Guilds 2392 Inspection and Testing Level 2 course may be more suitable for you.
“Challenging! I ed with solid instruction from credible real world instructors.” Paul Ingles
There are no formal entry requirements to take this course. However, it is expected that you will have professional experience of electrical installation. You must be aged 18 or above to sit this course. If you have little or no experience of electrical testing and inspection, we recommend you take City & Guilds 2392 Inspection and Testing Level 2 before taking this qualification. Bookings • Call 0800 856 4448 • Visit www.tradeskills4u.co.uk • Courses start every week
Electrical Training Courses
City & Guilds 2330 Electrotechnical Training Level 2 If you want to be an electrician, this course is for you. It enables you to gain the practical skills and knowledge – and the qualification – you need to get started. Course Content
Duration
This course introduces you to the basic and fundamental aspects of an electrician’s work in a clear and straightforward way, and provides you with the essential qualification that you need to get started – the Level 2 Certificate in Electrical Technology 2330.
Intensive 10-week course, held over a 20-week period. To enable you to fit this demanding course into your busy schedule, course sessions are held on a ‘two weeks on, two weeks off’ basis.
To gain the qualification, you must successfully assessments in a series of basic courses, split into four units. The courses are: Unit 1: Working effectively and safely in the electrotechnical environment • Safety • Legal duties • PPE • Electrical specialisms • Fire extinguishers and warning signs • Electric shock and isolation • Accident and emergency procedures Unit 2: Principles of electrotechnology • Identify SI units • Basic mechanics • Resistance • Power generation • Conductors and insulators • Electrons and charge • Series and parallel circuits • Transformers • Shock protection • Electrical systems Unit 3: Application of health principles • Risk control • Dealing with information • Resistance • Delta connections • Earth fault
and safety and electrical • Emergency switching • Relays • Three phase systems • Protective devices • Over currents
Unit 4: Installation (Buildings & Structures) • Electricity at work regulations • Structure of BS7671 • Codes of practice • Wiring systems • Cable calculations • Special locations • Work planning If you are keen to specialise, you can also choose to focus on one of a range of relevant topics, including: • Installation • Maintenance • Instrumentation • building This course is open to any age. If you are aged 16 to 25, it can form part of an apprenticeship that allows you to earn as you learn. Alternatively, once you have understood the basics, gained your qualification and found a job as an electrician, you’re ready to take an NVQ relevant to our chosen specialist area. However you choose to use this course, it’s an essential stepping-stone to your new career as a fully qualified electrician. The course content features practical and theory learning, with online exams and practical assessments.
Although designed to cater for people of all ages, the flexibility of the course makes it especially useful for mature students with family, work and other commitments who are unable or unwilling to attend college for the duration of a full academic year. Prerequisite There are no formal entry requirements to take this course and no previous experience or qualifications are needed. The course is suitable for: • Anyone wishing to begin a career as an electrician • Anyone currently following the Electrical Modern Apprenticeship programmes • Anyone wishing to go on to study for an N/SVQ in Electrical Technology Bookings • Call 0800 856 4448 • Visit www.tradeskills4u.co.uk • Courses start every week
Electrical Training Courses
City & Guilds 2330 Electrotechnical Training Level 3 This course enables anyone with previous electrical experience to gain the City & Guilds 2330 Level 3 Certificate in electrotechnical technology – crucial proof that you are fully qualified and competent to do the job. Course Content
Duration
This course is the next step for any experienced electrician wishing to improve their qualifications – and the logical progression for anyone who has already gained the City & Guilds 2330 Level 2 or 2360 Part 1 qualifications.
Intensive 6-week course, held over a 12-week period. To enable you to fit this demanding course into your busy schedule, course sessions are held on a ‘two weeks on, two weeks off’ basis.
The course covers the following: • Level 3 Certificate in electrotechnical technology – installation (buildings and structures) • Theory and practical based training, including an online, multiple-choice exam and two practical assessments Alternatively, you can use this course to add to the knowledge and understanding you will need in order to go on to take an electrotechnical NVQ. However you choose to use this course, it’s an essential steppingstone to furthering your career as a fully qualified electrician.
Although designed to cater for people of all ages, the flexibility of the course makes it especially useful for mature students with family, work and other commitments who are unable or unwilling to attend college for the duration of a full academic year. Prerequisite To take this course, you will need to have relevant electrical experience. That may be any of the following: • You may have practical experience from your current or previous job, for example as an electrical maintenance engineer • You may have the City & Guilds 2330 Level 2 qualification or 2360 Part 1 qualification • If you are aged 16 to 25, this course can form part of an Modern Electrical Apprenticeship programme that allows you to earn as you learn Bookings • Call 0800 856 4448 • Visit www.tradeskills4u.co.uk • Courses start every week
Electrical Training Courses
City & Guilds 2377 PAT Testing This package of two courses enables practicing electrical professionals to obtain the qualification and skills they will need before carrying out PAT testing on commercial electrical appliances. Course Content
Duration
Every item of electrical equipment in a commercial environment – from kettles to computers – must be PAT tested for safety and marked as safe.
• City & Guilds 2377-12 only: 1 day, including online assessment • City & Guilds 2377-11 only: 1 day, including online assessment • Both courses taken together: 2 days, including online assessment
This package consists of two City & Guilds courses that will provide you with the essential skills and qualifications you need to prove that you are competent to carry out PAT testing. The courses may be taken individually or together.
Courses can be taken separately or together, depending on your requirements.
The courses are: City & Guilds 2377-11 Management of Electrical Equipment Maintenance This course includes: • Law and scope of relevant legislation • Types, use and testing of electrical equipment • Categories, frequency and practicalities of PAT testing • Procedures, documentation and responsibility • Identify training required for PAT testing • Appropriate test instruments and how they are used City & Guilds 2377-12 Inspection and Testing of electrical Equipment This course includes: • Electrical safety • Regulations role and responsibilities • Insulation and earthing • Classification of appliances • Preliminary inspection, test precautions • Using a portable appliance tester • Essential tests • Optional tests • Labelling tests • Reporting and recording results • Implementing a test programme • Practical assessment Each course includes practical training and a one-hour exam of 30 questions.
“My PAT testing qualification has turned out to be a nice little earner.” Richard Yorke
Prerequisite There are no formal entry requirements to take this course. However, it is expected that you will have some experience of electrical installation. If you do not the 5 day Foundation Course will be useful to you. Before taking this course you will need to read the reference book Codes of Practice for In-Service Inspection and testing of Electrical Equipment 3rd edition (ISBN 978 0 86341 833 4) – available from us, from www.theeit.org or from good electrical suppliers. Bookings • Call 0800 856 4448 • Visit www.tradeskills4u.co.uk • Courses start every week
Price List Our wide range of fantastic courses means we’re bound to have the one you need. Courses start every week and your place can be secured with a small deposit. Our very reasonable prices include VAT and the use of all tools and materials. Call 0800 856 4448 or visit www.tradeskills4u.co.uk to book your place online now. 10-day Electrical Multi-Course 13-day Electrical Multi-Course 2-day Skills Update Electrical Course 5-day Electrical Foundation Course Part P Domestic Installers Course
Plastering
Bricklaying
Electrical
City & Guilds 2382, 17th Edition Course City & Guilds 2382, 17th Edition Update City & Guilds 2392 Inspection and Testing Level 2 City & Guilds 2391 Inspection and Testing Level 3 City & Guilds 2377 PAT Testing – City & Guilds 2377-12 only – City & Guilds 2377-11 only – Both courses booked together City & Guilds 2330 Electrotechnical Training Level 2 City & Guilds 2330 Electrotechnical Training Level 3 5-day Foundation Bricklaying Course 5-day House Construction Course 5-day Hard Landscaping Course City & Guilds 6217 Bricklaying Course
2 Weekends Bricklaying Course 5-day Foundation Plastering Course 10-day Intermediate Plastering Course City & Guilds 6217 Plastering Course
2 Weekends Plastering Course 5-day Foundation Tiling Course 10-day Intermediate Tiling Course
Tiling
4-week Advanced Tiling Course Weekend Tiling Course DIY Plastering Course
DIY
DIY Bricklaying Course DIY Electrical Course DIY Tiling Course
£1,485 Discounted rate, applies if all three courses are booked together. £1,699 Discounted rate, applies if all three courses are booked together. £225 £449 £785 Includes registration, assessments and certification. An initial deposit of just £500 secures your place on the course. £495 Includes instruction and exam fees. An initial deposit of just £150 secures your place on the course. £175 Includes instruction and exam fees. £525 Includes registration, assessments and certification. £595 Includes registration, assessments and certification.
£225 £199 £300 £3,995 Ask us to find out more about pay as you go options. £2,995 Ask us to find out more about pay as you go options. £350 Includes use of all tools and materials. An initial deposit of just £150 secures your place on the course. £350 Includes use of all tools and materials. £350 £2,295 An initial deposit of just £500 secures your place on the course. This is followed by six weekly instalments of approximately £299 during the course – an easy way to spread the cost. £350 Includes use of all tools and materials. £325 Includes use of all plastering tools and materials. An initial deposit of just £150 secures your place on the course. £350 Includes use of all plastering tools and materials. £2,295 An initial deposit of just £500 secures your place on the course. This is followed by six weekly instalments of approximately £299 during the course – an easy way to spread the cost. £325 Includes use of all plastering tools and materials. £350 Includes use of all tiling tools and materials. An initial deposit of just £150 secures your place on the course. £750 Includes use of all tiling tools and materials. An initial deposit of just £150 secures your place on the course. £1,500 Includes use of all tiling tools and materials. An initial deposit of just £500 secures your place on the course. £350 Includes use of all tiling tools and materials. £325 Includes use of all plastering tools and materials. An initial deposit of just £150 secures your place on the course. £350 Includes use of all bricklaying tools and materials. An initial deposit of just £150 secures your place on the course. £449 £350 Includes use of all tiling tools and materials. An initial deposit of just £150 secures your place on the course.
Prices correct at time of printing and are subject to amendment.
Other courses
DIY
Tiling
Plastering
Bricklaying
Our wide range of fantastic courses means we’re bound to have the one you need. Courses start every week and your place can be secured with a small deposit. Our very reasonable prices include VAT and the use of all tools and materials. Call 0800 856 4448 or visit www.tradeskills4u.co.uk to book your place online now. 5-day Foundation Bricklaying Course
This course includes the essential training and knowledge needed to learn the basics of bricklaying.
5-day House Construction Course
This course includes the essential training and knowledge needed to learn the basics of house construction bricklaying.
5-day Hard Landscaping Course
This course includes the essential training and knowledge needed to learn the basics of bricklaying for outdoor projects.
City & Guilds 6217 Bricklaying Course
This course enables anyone who wishes to become a bricklayer to obtain the qualification and skills they will need in order to begin bricklaying professionally.
2 Weekends Bricklaying Course
This course includes all the essential training and knowledge needed to learn the basics of bricklaying.
5-day Foundation Plastering Course
This course includes all the essential training and knowledge needed to learn the basics of plastering.
10-day Intermediate Plastering Course
This course enables anyone with a basic knowledge of plastering to boost their skills to professional level easily and quickly.
City & Guilds 6217 Plastering Course
This course enables anyone who wishes to become a plasterer to obtain the qualification and skills they will need in order to begin plastering professionally.
2 Weekends Plastering Course
This course includes all the essential training and knowledge needed to learn the basics of plastering. Or add plastering to your DIY skills.
5-day Foundation Tiling Course
This course includes all the essential training and knowledge needed to learn the basics of tiling.
10-day Intermediate Tiling Course
This course enables anyone with a basic knowledge of tiling to boost their skills to professional level easily and quickly.
4-week Advanced Tiling Course
This course provides the whole skills-package needed to begin a career in tiling.
Weekend Tiling Course
This course includes all the essential training and knowledge needed to learn the basics of tiling.
DIY Plastering Course
This course is the perfect place to start if you want to gain all the expertise needed to carry out your own plastering projects around the home.
DIY Bricklaying Course
This course is the perfect place to start if you want to gain all the expertise needed to carry out your own bricklaying projects around the home.
DIY Electrical Course
This course is the perfect place to start if you want to gain all the expertise needed to carry out your own electrical projects around the home.
DIY Tiling Course
This course is the perfect place to start if you want to gain all the expertise needed to carry out your own tiling projects around the home.
The best place to get the skills you need
Trade Skills 4U, Unit 3, Metana House, Priestley Way, Crawley RH10 9NT 0800 856 444 8 www.tradeskills4u.co.uk [email protected]
Corporate Customers
Your customers expect your workforce to have the most up to date skills and qualifications. Trade Skills 4U can help make sure every member of your team has all the know-how they need to do the job right. Perhaps your team are highly experienced but simply lack the formal qualifications that are required by law. We can fix that in just a few days by helping them gain the relevant certificates they need to prove their competence. Or maybe you’d like your employees to gain new skills and expand the service you offer your customers. Our flexible training courses can help your team to learn vital new skills up to the highest standards. Our intensive courses last from two days to two weeks and ensure that your employees get the skills they need fast, without having to take long breaks from work commitments. And we get results, too. All our instructors are hugely experienced in their fields and operate from the biggest and best equipped training facility in the UK. It all adds up to an unbeatable package that consistently out-performs all competitors. Whatever your requirements, no job is too tough for us. To find out more call Trade Skills 4U on 0800 856 4448. We’ll be happy to hear from you.
“Very good course, full of relevant information in a relaxed atmosphere.”
“Best Course I’ve ever attended, learning curve spot on!”
Terry Ward
P Marsh
“Trade Skills 4U continues to perform well, delivering excellent quality EAL electrical qualifications.”” EAL Inspector (EV)
Accommodation Our customers come to use from all corners of the country. Some even come from the Scottish Isles or Europe. Being so close to Gatwick Airport, not only is air travel easy but there are many providers of short term accommodation to choose from. We have linked up with many suitable, sensibly priced providers of accommodation for you. We have personally inspected them and constantly monitor on the quality of service they offer. Also, many offer a free door to door shuttle service – check out the listings below. If you need any assistance booking, give us a call – we’ll be happy to help. The Corner House Hotel
Travel Lodge Hotel
72 Massetts Road, Horley Tel: 01293 784574
Church Road, Lowfield Heath Tel: 0870 191 1531
Hotel/B&B. Transport to and from the end of our road for free (max 10 mins). Breakfast included. Lovely old Edwardian house. Restaurant/bar/parking facilities. Standard single room will full English breakfast – £34. Single en suite room – £42. Double standard room – £52. Double en suite room – £62
5 minutes away. No breakfast. Booking in advance can be as little as £26 per night rising to £45. If booking on the day, ask.
Oakhurst B&B Oakhurst, Radford Road, Tinsley Green, Crawley Tel: 01293 882425
Thetford B&B Brookhill Road, Copthorne Tel: 01342 719809/07949 261221 Full English £35 per night. Transport included.
Used by airline staff. Ask about rates when you call. Free transport to and from training centre.
Masslink Guest House
Single room – £30. Single en suite room – £35
70 Massetts Road, Horley Tel: 01293 785798
Oaklands Farm House
Single room – £27 (£29.50 with breakfast). Twin room – £29-£31.
Oaklands Farm, Radford Road Tel: 01293 887863 5 minutes away. From £36 per night. Deals available if staying for a few nights – ask.
Gatwick Gable End Guest House 23 Church Road, Horley Tel: 01293 783679 Single room – £45
The Manor House B&B Tel: 01293 512298 Family run B&B. Single room not en suite – £30. Single en suite – £40. Double or twin room en suite – £50.
Castle Lodge Guest House 28 Massetts Road, Horley Tel: 01293 783200 Single room with en suite facilities – £35.
and Conditions •A non-refundable deposit of £150 for each course week is required to reserve your space, with the balance due 14 days before the start date of your course. •F or Electrical VRQ Domestic Installers course (Part P) or City & Guild courses a deposit of £500 is payable. •F or City and Guilds 2330 Level 2 Certificate in Electrotechnical Technology a deposit of £1000 is required, the 2330 Level 3 a £750 deposit applies. •P ayment can be made by cheque, credit/debit card or BACS transfer. Cheques to be made payable to Trade Skills 4U.
• It is your responsibility to attend and complete the course. If you fail to attend all the days of your course or are consistently late, Trade Skills 4U reserves the right to ask you to leave the course with no refund of course fees. • Please ensure that you are able to attend the complete course, as once your course has started, it cannot be completed at a later date. • Trade Skills 4U reserves the right to alter booking arrangements if necessary and has the right to refuse any application.
•A letter confirming the start date of your course will be sent on receipt of your booking form.
• Trade Skills 4U cannot be held responsible for accommodation. Any information provided is to assist in your search for accommodation. You are responsible for your own booking and payment.
•T he fee covers the use of all tools and materials required for your course. It does not include text books, note books or writing materials.
• If you lose your original and require a copy of an invoice/ receipt/confirmation letter, a £10 istration fee will be charged.
• You will be required to bring protective hard boots and work wear on the all bricklaying and City & Guilds Plastering Courses.
• Candidates agree to comply with relevant Trade Skills 4U health and safety policies and procedures at all times during the course.
•P rotective boots are advised for electrical practical workshop courses.
• Where any candidate does not comply with a specific request, that candidate will be asked to leave the course immediately with no refund of course fees.
•P rotective gloves, glasses and ear protection, if required, will be provided by Trade Skills 4U to use free of charge during the course. •C ancellation of your course: fees excluding deposits are refundable if written cancellation is received at least 21 days prior to your course start date, otherwise the full fee becomes payable. • If you are unable to attend due to exceptional unavoidable circumstances, a new date may be offered at the discretion of Trade Skills 4U. •S hould you have to change your course date you will be charged an istration Fee of £25, provided we have at least 21 days notice. The deposit remains non-refundable. You can only request to move your course once.
Complaints •W e ask that you notify us immediately of any complaint and every effort will be made to address this in a timely manner. •A t the end of each course you will be provided with a form – we encourage you to complete this. • If you fail to notify us of any problem it may seriously affect any right you may have to compensation.
• Any candidate misbehaving, or acting in a way that would be an impediment to other course candidates will be asked to leave the course immediately with no refund of course fees. • Any candidate not complying with Trade Skills 4U equal opportunities policy will be asked to leave the course immediately with no refund of course fees. • All candidates attending any course with Trade Skills 4U agree to be bound by these .
Related Documents 3h463d
Ts4u Electrics All 4z5h6u
December 2019 11
Electrics Training 2w5c8
November 2020 0
B737 Electrics 3r53i
April 2020 33
July 2020 0
Scania Bodybuilder Electrics 592f2h
March 2023 0