Wireless Stepper Motor Control Using Rf Communication qi3m

WK309

Title of the project

:

Wireless Stepper motor control using RF Communication

Software

:

Embedded C, Keil, Proload

Microcontroller

:

AT89S52

Power Supply

:

+5V, 500mA Regulated Power Supply

Display

:

LED 5mm, 16 X 2 LCD

Crystal

:

11.0592MHz

Controls

:

Stop, CLK, Counter CLK

Communication Device

:

RF Module

Applications

:

Computer peripherals, business machines, Process control, machine tools and robotics

Developed By

:

M/S Wine Yard Technologies

Phone

:

040-6464 6363

Hyderabad: Tarakarama Estates, 2nd Left Lane Opp RS Brothers, Ameerpet, Hyderabad – 500073 Vijayawada: 4th Floor, White House, Opp All India Radio, MG Road, Vijayawada – 520010

www.WineYardProjects.com   Ph: 040 – 6464 6363, 6625 6695, 888 5555 212

 

Wireless Stepper Motor Control using RF Communication

WK309

ABSTRACT: Stepper motor is found with finds lot applications in computer peripherals, business machines, process control, machine tools and robotics. Especially in robotics and process control like silicon processing, I.C Bonding and Laser trimming applications, it is necessary to control the stepper motor from remote places. This project is to control the stepper motor from remote place using RF modules. This deals with the design and development of hardware and software for Wireless Stepper motor control system. Three switches are used to control the direction of the stepper motor at the transmitter side. The status of these switches is transmitted using RF transmitter and received by the RF receiver. The microcontroller at the receiver will be continuously monitoring the status of these switches received from the decoder and performs the corresponding action. The RF modules used here are STT-433 MHz Transmitter, STR-433 MHz Receiver, HT640 RF Encoder and HT648 RF Decoder. The three switches are interfaced to the RF transmitter through RF Encoder. The encoder continuously reads the status of the switches, es the data to the RF transmitter and the transmitter transmits the data.

At the receiving end, the RF receiver receives this data, gives it to RF decoder. This decoder converts the single bit data into 8-bit data and presents it to the microcontroller. Now, it is the job of the controller to read the data and perform the corresponding action i.e., to rotate the stepper motor clockwise, anticlockwise or entirely stop it.

Hyderabad: Tarakarama Estates, 2nd Left Lane Opp RS Brothers, Ameerpet, Hyderabad – 500073 Vijayawada: 4th Floor, White House, Opp All India Radio, MG Road, Vijayawada – 520010

www.WineYardProjects.com   Ph: 040 – 6464 6363, 6625 6695, 888 5555 212

Communication

 

Wireless Stepper Motor Control using RF

16 X 2 Liquid Crystal display (LCD) is provided at the receiver side to display the status of the stepper motor. ULN driver is used to drive the stepper motor.

This project uses regulated 5V, 500mA power supply. 7805 three terminal voltage regulator is used for voltage regulation. Bridge type full wave rectifier is used to rectify the ac out put of secondary of 230/12V step down transformer.

Hyderabad: Tarakarama Estates, 2nd Left Lane Opp RS Brothers, Ameerpet, Hyderabad – 500073 Vijayawada: 4th Floor, White House, Opp All India Radio, MG Road, Vijayawada – 520010

www.WineYardProjects.com   Ph: 040 – 6464 6363, 6625 6695, 888 5555 212

 

WK309

WK309

Block diagram: Transmitter

Clock-wise

RF Encoder

STOP

RF Transmitter

Counter Clock-wise

Step down T/F

Bridge Rectifier

Filter Circuit

Regulator Power supply to all sections

Hyderabad: Tarakarama Estates, 2nd Left Lane Opp RS Brothers, Ameerpet, Hyderabad – 500073 Vijayawada: 4th Floor, White House, Opp All India Radio, MG Road, Vijayawada – 520010

www.WineYardProjects.com   Ph: 040 – 6464 6363, 6625 6695, 888 5555 212

 

BLOCK DIAGRAM:

WK309

16X2 LCD

RF Receiver

RF Decoder

89S52 MCU ULN Driver

Stepper Motor

11.0592MHz Crystal Oscillator

Power – On Reset

Step down T/F

Bridge Rectifier

Filter Circuit

Regulator Power supply to all sections

Hyderabad: Tarakarama Estates, 2nd Left Lane Opp RS Brothers, Ameerpet, Hyderabad – 500073 Vijayawada: 4th Floor, White House, Opp All India Radio, MG Road, Vijayawada – 520010

www.WineYardProjects.com   Ph: 040 – 6464 6363, 6625 6695, 888 5555 212

 

Block diagram: Receiver

WK309

Advantages:

Simple operation Less Power Consumption Disadvantages: Limited coverage area

Scopes for Advancements: ƒ

Range can be increased using high power RF transmitter and receiver

Applications ƒ

Robotics and Wireless Robot Arm

ƒ

Industries are using RF solutions for monitoring, process, control, inventory tracking, data links and bar code reading devices.

ƒ

Commercial wireless applications such as door announcers, security and access systems, gate control, remote activation, score board and paging systems.

ƒ

Automotive companies employing RF for wireless remote control, remote keyless entry and safety applications.

ƒ

Consumer products including electronic toys, home security, gate and garage door openers, intercom, fire and safety systems and irrigation controllers

ƒ

Medical products like patient call and monitoring, handicap assistance device, surgery communication system, remote patient data logging and ECG monitor

Hyderabad: Tarakarama Estates, 2nd Left Lane Opp RS Brothers, Ameerpet, Hyderabad – 500073 Vijayawada: 4th Floor, White House, Opp All India Radio, MG Road, Vijayawada – 520010

www.WineYardProjects.com   Ph: 040 – 6464 6363, 6625 6695, 888 5555 212

 

Remote controlled