Caproni Hydraulic Cartridge Valves-en 3a4m1k
This document was ed by and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this report form. Report 3i3n4
Overview 26281t
& View Caproni Hydraulic Cartridge Valves-en as PDF for free.
More details 6y5l6z
- Words: 9,845
- Pages: 60
SOLENOID VALVE EV06-2A
DESCRIPTION
Ø42
A solenoid-operated, 2-way, piloted, poppet-type, normally open, screw-in, hydraulic cartridge valve designed for low leakage in load-holding applications.
92
OPERATION
S24
28
2 1
30Nm±10%
When de-energized, the EV06-2A allows flow from 2 to 1. Flow from 1 to 2 is severely restricted in this mode. When energized, the valve's poppet closes on its seat, blocking flow from 2 to 1. In this mode the cartridge will allow 1 to 2 flow after overcoming the solenoid force.
Ø12.7
RATINGS
3/4-16UNF-2A
Operating Pressure: 250 bar Flow: See Performance Chart Internal Leakage: 0.25 cc/minute max. at 250 bar Temperature: -20 to 90°C with standard Buna N seals Coil Duty Rating: Continuous from 85 % to 115 % of nominal voltage Minimum Pull-in Voltage: 85 % of nominal at 250 bar Filtration: Recommend 25 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC06-2; See page 8.2.01
SYMBOL
2
1 CAVITY
PERFORMANCE (Carttridge Only)
See page 8.2.01 From 2 to 1
TO ORDER
32cSt oil at 40°C
EV06-2A
Voltage 0 12 24 11 22
-
Without coil 12 V DC 24 V DC 110V RAC 220V RAC
Seals N - Buna N V - Viton A
PRESSURE DROP bar
10.2
Terminations DIN 43650 See page 8.1.01
8.5 6.8 5.1 3.4 1.7 7.5
15.1 FLOW L/min.
1.1.01
22.7
SOLENOID VALVE EV08-2A
DESCRIPTION Ø42
A solenoid-operated, 2-way, piloted, poppet-type, normally open, screw-in, hydraulic cartridge valve designed for low leakage in load-holding applications.
OPERATION 92
When de-energized, the EV08-2A allows flow from 2 to 1. Flow from 1 to 2 is severely restricted in this mode. When energized, the valve's poppet closes on its seat, blocking flow from 2 to 1. In this mode the cartridge will allow 1 to 2 flow after overcoming the solenoid force.
S24 30Nm±10%
28
2
RATINGS
1
Operating Pressure: 250 bar Flow: See Performance Chart Internal Leakage: 0.25 cc/minute max. at 250 bar Temperature: -20 to 90°C with standard Buna N seals Coil Duty Rating: Continuous from 85 % to 115 % of nominal voltage Minimum Pull-in Voltage: 85 % of nominal at 250 bar Filtration: Recommend 25 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC08-2; See page 8.2.01
Ø15.87 3/4-16UNF-2A
SYMBOL
2
1 CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.01 From 2 to 1
TO ORDER
32cSt oil at 40°C
EV08-2A
Voltage 0 12 24 11 22
-
Without coil 12 V DC 24 V DC 110V RAC 220V RAC
Seals N - Buna N V - Viton A
PRESSURE DROP bar
10.2
Terminations DIN 43650 See page 8.1.01
8.5 6.8 5.1 3.4 1.7 7.5
15.1 FLOW L/min.
1.1.02
22.7
SOLENOID VALVE EV10-2A
DESCRIPTION
Ø42
A solenoid-operated, 2-way, piloted, poppet-type, normally open, screw-in, hydraulic cartridge valve designed for low leakage in load-holding applications.
OPERATION
Ø15.87
RATINGS
101
2
When de-energized, the EV10-2A allows flow from 2 to 1. Flow from 1 to 2 is severely restricted in this mode. If the 1 to 2 path is required, see model EV10-2F, page 1.6.03 When energized, the valve's poppet closes on its seat, blocking flow in the 2 to 1 direction. In this mode the cartridge will allow 1 to 2 flow after overcoming the solenoid force
S27 31.8
30Nm±10%
1
7/8-14UNF-2A
SYMBOL
2
Operating Pressure: 210 bar Flow: See Performance Chart Internal Leakage: 0.25 cc/minute max. at 210 bar Temperature: -20 to 90°C with standard Buna seals Coil Duty Rating: Continuous from 85 % to 115 % of nominal voltage Minimum Pull-in Voltage: 85 % of nominal at 210 bar Filtration: Recommend 25 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC10-2; See page 8.2.04
1 CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.04 1 to 2(e)
TO ORDER
2 to 1(d)
32cSt oil at 40°C
Voltage 0 12 24 11 22
-
Without coil 12 V DC 24 V DC 110V RAC 220V RAC
Seals N - Buna N V - Viton A
PRESSURE DROP bar
EV10-2A 8.6 6.9 5.2 3.4 1.7 11.4
Terminations DIN 43650 See page 8.1.01
22.7
34.1
FLOW L/min.
1.1.03
45.4
56.8
SOLENOID VALVE EV06-2B
DESCRIPTION Ø42
A solenoid-operated, 2-way, normally closed, piloted poppet-type, screw-in hydraulic cartridge valve, intended to act as a blocking or load-holding device for low flow circuits.
83
OPERATION
S24
28
2 1
30Nm±10%
When de-energized, the EV06-2B acts as a check valve, allowing flow from 1 to 2, while blocking flow from 2 to 1. When energized, the cartridge's poppet lifts to open the 2 to 1 flow path. In this mode, flow from 1 to 2 is severely restricted.
Ø12.7
RATINGS
3/4-16UNF-2A
Operating Pressure: 250 bar Flow: See Performance Chart Internal Leakage: 0.25 cc/minute max. at 250 bar Temperature: -20 to 90°C with standard Buna N seals Coil Duty Rating: Continuous from 85 % to 115 % of nominal voltage Minimum Pull-in Voltage: 85 % of nominal at 250 bar Filtration: Recommend 25 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC06-2; See page 8.2.01
SYMBOL
2
1 CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.01 From 2 to 1
TO ORDER
32cSt oil at 40°C
EV06-2B
Voltage 0 12 24 11 22
-
Without coil 12 V DC 24 V DC 110V RAC 220V RAC
Seals N - Buna N V - Viton A
PRESSURE DROP bar
10.3 8.6 6.9 5.2 3.4 1.7
Terminations DIN 43650 See page 8.1.01
11.4 FLOW L/min.
1.2.01
22.7
SOLENOID VALVE EV56-2B
DESCRIPTION Ø32
A solenoid-operated, 2-way, normally closed, piloted poppet-type, screw-in hydraulic cartridge valve, intended to act as a blocking or load-holding device for low flow circuits.
87
OPERATION
S24 30Nm±10%
28
2 Ø12.7
1
When de-energized, the EV56-2B acts as a check valve, allowing flow from 1 to 2, while blocking flow from 2 to 1. When energized, the cartridge's poppet lifts to open the 2 to 1 flow path. In this mode, flow from 1 to 2 is severely restricted.
RATINGS
3/4-16UNF-2A
SYMBOL
2
Operating Pressure: 200 bar Flow: See Performance Chart Internal Leakage: 0.25 cc/minute max. at 200 bar Temperature: -20 to 90°C with standard Buna N seals Coil Duty Rating: Continuous from 85 % to 115 % of nominal voltage Minimum Pull-in Voltage: 85 % of nominal at 200 bar Filtration: Recommend 25 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC06-2; See page 8.2.01
1 CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.01 From 2 to 1
TO ORDER
32cSt oil at 40°C
EV56-2B
Voltage 0 12 24 11 22
-
Without coil 12 V DC 24 V DC 110V RAC 220V RAC
Seals N - Buna N V - Viton A
PRESSURE DROP bar
10.3 8.6 6.9 5.2 3.4 1.7
Terminations DIN 43650 See page 8.1.01
11.4 FLOW L/min.
1.2.02
22.7
SOLENOID VALVE EV08-2B
DESCRIPTION Ø42
A solenoid-operated, 2-way, normally closed, piloted poppet-type, screw-in hydraulic cartridge valve, intended to act as a blocking or load-holding device for low flow circuits.
83
OPERATION
S24 30Nm±10%
28
2 1
Ø15.87
When de-energized, the EV08-2B acts as a check valve, allowing flow from 1 to 2, while blocking flow from 2 to 1. When energized, the cartridge's poppet lifts to open the 2 to 1 flow path. In this mode, flow from 1 to 2 is severely restricted. If this path is required, see model EV08-2E, page 1.5.03
RATINGS
3/4-16UNF-2A
Operating Pressure: 250 bar Flow: See Performance Chart Internal Leakage: 0.25 cc/minute max. at 250 bar Temperature: -20 to 90°C with standard Buna seals Coil Duty Rating: Continuous from 85 % to 115 % of nominal voltage Minimum Pull-in Voltage: 85 % of nominal at 250 bar Filtration: Recommend 25 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC08-2; See page 8.2.01
SYMBOL
2
1 CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.01 From 2 to 1
TO ORDER
32cSt oil at 40°C
EV08-2B
Voltage 0 12 24 11 22
-
Without coil 12 V DC 24 V DC 110V RAC 220V RAC
Seals N - Buna N V - Viton A
PRESSURE DROP bar
10.3 8.6 6.9 5.2 3.4 1.7 11.4
Terminations DIN 43650 See page 8.1.01
FLOW L/min.
1.2.03
22.7
SOLENOID VALVE EV10-2B
Ø42
DESCRIPTION A solenoid-operated, 2-way, normally closed, poppet-type, screw-in hydraulic cartridge valve, designed to function as a load holding or blocking valve in applications requiring low internal leakage.
97
OPERATION
S27
31.8
30Nm±10%
When de-energized, the EV10-2B acts as a check valve, allowing flow to from 1 to 2, while blocking flow in the reverse direction. When energized, the poppet lifts to open the 2 to 1 flow path. In this mode, flow from 1 to 2 is severely restricted. If this path is required, see model EV10-2E, page 1.5.04
2 RATINGS
1
Ø15.87 7/8-14UNF-2A
SYMBOL
2
Operating Pressure: 210 bar Flow: See Performance Chart Internal Leakage: 0.25 cc/minute max. at 210 bar Temperature: -20 to 90°C with standard Buna seals Coil Duty Rating: Continuous from 85 % to 115 % of nominal voltage Minimum Pull-in Voltage: 85 % of nominal at 210 bar Filtration: Recommend 25 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC10-2; See page 8.2.04
1 CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.04 1 to 2
TO ORDER
2 to 1
32cSt oil at 40°C
Voltage 0 12 24 11 22
-
Without coil 12 V DC 24 V DC 110V RAC 220V RAC
Seals N - Buna N V - Viton A
PRESSURE DROP bar
EV10-2B 8.6 6.9 5.2 3.4 1.7 11.4
Terminations DIN 43650 See page 8.1.01
22.7 FLOW L/min.
1.2.04
34.1
45.4
56.8
SOLENOID VALVE EV08-2C
DESCRIPTION
Ø42
A solenoid-operated, 2-way, normally open, piloted poppet-type, screw-in hydraulic cartridge valve, designed for low leakage in load-holding applications.
95
OPERATION
S24 30Nm±10%
33
2 1
When de-energized, the EV08-2C allows flow from 2 to 1. Flow from 1 to 2 is always blocking. When energized, the valve's poppet closes on its seat, blocking flow from 2 to 1. In this mode cartridge will also blocking flow from 1 to 2.
RATINGS Ø15.87
Operating Pressure: 250 bar Flow: See Performance Chart Internal Leakage: 0.25 cc/minute max. at 250 bar Temperature: -20 to 90°C with standard Buna seals Coil Duty Rating: Continuous from 85 % to 115 % of nominal voltage Minimum Pull-in Voltage: 85 % of nominal at 250 bar Filtration: Recommend 25 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC08-2A; See page 8.2.02
3/4-16UNF-2A
SYMBOL
2
1 CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.02 From 2 to 1 32cSt oil at 40°C
TO ORDER EV08-2C
Voltage 0 12 24 11 22
-
Without coil 12 V DC 24 V DC 110V RAC 220V RAC
Seals N - Buna N V - Viton A
PRESSURE DROP bar
10.2 8.5 6.8 5.1 3.4 1.7 7.5
Terminations DIN 43650 See page 8.1.01
15.1 FLOW L/min.
1.3.01
22.7
SOLENOID VALVE EV08-2D
DESCRIPTION Ø42
A solenoid-operated, 2-way, normally closed, piloted poppet-type, screw-in hydraulic cartridge valve, intended to act as a blocking or load-holding device for low flow circuits.
88
OPERATION
S24 30Nm±10%
2
33
When de-energized, the EV08-2D blocks flow in both directions. When energized, the cartridge's poppet lifts to open the 2 to 1 flow path. In this mode, flow from 1 to 2 is blocked.
RATINGS
1
Ø15.87
Operating Pressure: 250 bar Flow: See Performance Chart Internal Leakage: 0.25 cc/minute max. at 250 bar Temperature: -20 to 90°C with standard Buna seals Coil Duty Rating: Continuous from 85 % to 115 % of nominal voltage Minimum Pull-in Voltage: 85 % of nominal at 250 bar Filtration: Recommend 25 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC08-2A; See page 8.2.02
3/4-16UNF-2A
SYMBOL
2
1 CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.02 From 2 to 1
TO ORDER
32cSt oil at 40°C
EV08-2D
Voltage 0 12 24 11 22
-
Without coil 12 V DC 24 V DC 110V RAC 220V RAC
Seals N - Buna N V - Viton A
PRESSURE DROP bar
10.3 8.6 6.9 5.2 3.4 1.7 11.4
Terminations DIN 43650 See page 8.1.01
FLOW L/min.
1.4.01
22.7
SOLENOID VALVE EV06-2E
DESCRIPTION A solenoid-operated, 2-way, normally closed, poppet-type, screw-in hydraulic cartridge valve, designed for low leakage blocking and load holding applications.
Ø42
OPERATION 83
When de-energized, the EV06-2E acts as a check valve, allowing flow from 1 to 2, while blocking flow from 2 to 1. When energized, the poppet lifts to open the 2 to 1 flow path. In this mode, bidirectional flow is allowed.
S24
28
2
30Nm±10%
RATINGS
Ø12.7
1
Operating Pressure: 250 bar Flow: See Performance Chart Internal Leakage: 0.25 cc/minute max. at 250 bar Temperature: -20 to 90°C with standard Buna seals Coil Duty Rating: Continuous from 85 % to 115 % of nominal voltage
3/4-16UNF-2A
Minimum Pull-in Voltage: 85 % of nominal at 250 bar Filtration: Recommend 25 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC06-2; See page 8.2.01
SYMBOL
2
1 CAVITY
PERFORMANCE(Cartridge Only)
See page 8.2.01 1 to 2
TO ORDER
2 to 1
32cSt oil at 40°C
EV06-2E
Voltage 0 12 24 11 22
-
Without coil 12 V DC 24 V DC 110V RAC 220V RAC
Seals N - Buna N V - Viton A
PRESSURE DROP bar
10.3 8.6 6.9 5.2 3.4 1.7 11.4
Terminations DIN 43650 See page 8.1.01
FLOW L/min.
1.5.01
22.7
SOLENOID VALVE EV56-2E
DESCRIPTION
Ø32
A solenoid-operated, 2-way, normally closed, piloted poppet-type, screw-in hydraulic cartridge valve, intended to act as a blocking or load-holding device for low flow circuits.
87
OPERATION
S24 30Nm±10%
28
2 Ø12.7
1
When de-energized, the EV56-2E acts as a check valve, allowing flow from 1 to 2, while blocking flow from 2 to 1. When energized, the poppet lifts to open the 2 to 1 flow path. In this mode, bidirectional flow is allowed.
RATINGS
3/4-16UNF-2A
SYMBOL
2
Operating Pressure: 200 bar Flow: See Performance Chart Internal Leakage: 0.25 cc/minute max. at 200 bar Temperature: -20 to 90°C with standard Buna N seals Coil Duty Rating: Continuous from 85 % to 115 % of nominal voltage Minimum Pull-in Voltage: 85 % of nominal at 200 bar Filtration: Recommend 25 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC06-2; See page 8.2.01
1 CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.01 1 to 2
TO ORDER
2 to 1
32cSt oil at 40°C
EV56-2E
Voltage 0 12 24 11 22
-
Without coil 12 V DC 24 V DC 110V RAC 220V RAC
Seals N - Buna N V - Viton A
PRESSURE DROP bar
10.3 8.6 6.9 5.2 3.4 1.7 11.4
Terminations DIN 43650 See page 8.1.01
FLOW L/min.
1.5.02
22.7
SOLENOID VALVE EV08-2E
DESCRIPTION
Ø42
A solenoid-operated, 2-way, normally closed, poppet-type, screw-in hydraulic cartridge valve, designed for low leakage blocking and load holding applications.
OPERATION 83
When de-energized, the EV08-2E acts as a check valve, allowing flow from 1 to 2, while blocking flow from 2 to 1. When energized, the poppet lifts to open the 2 to 1 flow path. In this mode, bidirectional flow is allowed.
S24 30Nm±10%
28
2
RATINGS
1
Ø15.87
Operating Pressure: 250 bar Flow: See Performance Chart Internal Leakage: 0.25 cc/minute max. at 250 bar Temperature: -20 to 90°C with standard Buna seals Coil Duty Rating: Continuous from 85 % to 115 % of nominal voltage
3/4-16UNF-2A
Minimum Pull-in Voltage: 85 % of nominal at 250 bar Filtration: Recommend 25 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC08-2; See page 8.2.01
SYMBOL
2
1 CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.01 1 to 2
TO ORDER
2 to 1
32cSt oil at 40°C
EV08-2E
Voltage 0 12 24 11 22
-
Without coil 12 V DC 24 V DC 110V RAC 220V RAC
Seals N - Buna N V - Viton A
PRESSURE DROP bar
10.3 8.6 6.9 5.2 3.4 1.7 11.4
Terminations DIN 43650 See page 8.1.01
FLOW L/min.
1.5.03
22.7
SOLENOID VALVE EV10-2E
DESCRIPTION
Ø42
A solenoid-operated, 2-way, normally closed, poppet-type, screw-in hydraulic cartridge valve, designed for low leakage blocking and load holding applications.
OPERATION
97
When de-energized, the EV10-2E acts as a check valve, allowing flow to from 1 to 2, while blocking flow from 2 to 1. When energized, the poppet lifts to open the 2 to 1 flow path. In this mode, flow is also allowed from 1 to 2.
S27
31.8
30Nm±10%
RATINGS
2 1
Ø15.87 7/8-14UNF-2A
SYMBOL
2
Operating Pressure: 210 bar Flow: See Performance Chart Internal Leakage: 0.25 cc/minute max. at 210 bar Temperature: -20 to 90°C with standard Buna seals Coil Duty Rating: Continuous from 85 % to 115 % of nominal voltage Minimum Pull-in Voltage: 85 % of nominal at 210 bar Filtration: Recommend 25 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC10-2; See page 8.2.04
1 CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.04
TO ORDER
1 to 2
EV10-2E
0 12 24 11 22
-
Without coil 12 V DC 24 V DC 110V RAC 220V RAC
32cSt oil at 40°C
Seals N - Buna N V - Viton A
PRESSURE DROP bar
Voltage
2 to 1
8.6 6.9 5.2 3.4 1.7
Terminations DIN 43650 See page 8.1.01
11.4
22.7
34.1
FLOW L/min.
1.5.04
45.4
56.8
SOLENOID VALVE EV06-2F
DESCRIPTION Ø42 A solenoid-operated, 2-way, normally open, poppet-type, screw-in hydraulic cartridge valve, designed to function as a load holding or blocking valve in applications requiring low internal leakage at high pressure.
OPERATION 92
When de-energized, the EV06-2F poppet lifts to open flow from 2 to 1. Flow is also open from 1 to 2. When energized, the cartridge acts as a check valve, allowing flow from 1 to 2, while blocking flow from 2 to 1.
S24
28
2
30Nm±10%
RATINGS
Ø12.7
1
Operating Pressure: 250 bar Flow: See Performance Chart Internal Leakage: 0.25 cc/minute max. at 250 bar Temperature: -20 to 90°C with standard Buna seals Coil Duty Rating: Continuous from 85 % to 115 % of nominal voltage
3/4-16UNF-2A
Minimum Pull-in Voltage: 85 % of nominal at 250 bar Filtration: Recommend 5 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC06-2; See page 8.2.01
SYMBOL
2
1 CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.01 From 2 to 1 32cSt oil at 40°C
TO ORDER EV06-2F
Voltage 0 12 24 11 22
-
Without coil 12 V DC 24 V DC 110V RAC 220V RAC
Seals N - Buna N V - Viton A
PRESSURE DROP bar
10.2 8.5 6.8 5.1 3.4 1.7 7.5
Terminations DIN 43650 See page 8.1.01
15.1 FLOW L/min.
1.6.01
22.7
SOLENOID VALVE EV08-2F
DESCRIPTION Ø42
A solenoid-operated, 2-way, normally open, poppet-type, screw-in hydraulic cartridge valve, designed to function as a load holding or blocking valve in applications requiring low internal leakage at high pressure.
OPERATION 92
When de-energized, the EV08-2F poppet lifts to open flow from 2 to 1. Flow is also open from 1 to 2. When energized, the cartridge acts as a check valve, allowing flow from 1 to 2, while blocking flow from 2 to 1.
S24 30Nm±10%
28
2
RATINGS
1
Operating Pressure: 250 bar Flow: See Performance Chart Internal Leakage: 0.25 cc/minute max. at 250 bar Temperature: -20 to 90°C with standard Buna seals Coil Duty Rating: Continuous from 85 % to 115 % of nominal voltage
Ø15.87 3/4-16UNF-2A
Minimum Pull-in Voltage: 85 % of nominal at 250 bar Filtration: Recommend 5 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC08-2; See page 8.2.01
SYMBOL
2
1 CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.01 From 2 to 1 32cSt oil at 40°C
TO ORDER EV08-2F
0 12 24 11 22
-
Without coil 12 V DC 24 V DC 110V RAC 220V RAC
Seals N - Buna N V - Viton A
PRESSURE DROP bar
Voltage
10.2 8.5 6.8 5.1 3.4 1.7 7.5
Terminations DIN 43650 See page 8.1.01
15.1 FLOW L/min.
1.6.02
22.7
SOLENOID VALVE EV10-2F
DESCRIPTION
Ø42
A solenoid-operated, 2-way, poppet-type, normally open, screw-in, hydraulic cartridge valve.
101
OPERATION
S27
When de-energized, the EV10-2F allows bidirectional flow from 2 to 1. When energized, the valve's poppet closes to block flow from 2 to 1. In this mode, the cartridge allows free reverse flow from 1 to 2 after overcoming the solenoid force
31.8
30Nm±10%
2 1
RATINGS
Ø15.87 7/8-14UNF-2A
SYMBOL
2
Operating Pressure: 210 bar Flow: See Performance Chart Internal Leakage: 0.25 cc/minute max. at 210 bar Temperature: -20 to 90°C with standard Buna seals Coil Duty Rating: Continuous from 85 % to 115 % of nominal voltage Minimum Pull-in Voltage: 85 % of nominal at 210 bar Filtration: Recommend 25 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC10-2; See page 8.2.04
1 CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.04 1 to 2
TO ORDER
2 to 1
32cSt oil at 40°C
Voltage 0 12 24 11 22
-
Without coil 12 V DC 24 V DC 110V RAC 220V RAC
Seals N - Buna N V - Viton A
PRESSURE DROP bar
EV10-2F 8.6 6.9 5.2 3.4 1.7 11.4
Terminations DIN 43650 See page 8.1.01
22.7 FLOW L/min.
1.6.03
34.1
45.4
56.8
SOLENOID VALVE EV06-2K
DESCRIPTION
Ø42
A solenoid-operated, 2-way, normally open, direct-acting, spool-type, screw-in hydraulic cartridge valve designed to function as a bidirectional blocking valve in low flow circuits.
9
OPERATION S24
28
2 1
When de-energized, the EV06-2K allows flow in both directions. When energized, the valve's spool shifts to close bidirectionally.
30Nm±10%
Ø12.7
RATINGS
3/4-16UNF-2A
Operating Pressure: 250 bar Flow: 8 L/min max. Internal Leakage: 82 cc/minute max. at 250 bar Temperature: -20 to 90°C with standard Buna seals Coil Duty Rating: Continuous from 85 % to 115 % of nominal voltage Minimum Pull-in Voltage: 85 % of nominal at 250 bar Filtration: Recommend 10 µm nominal Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC06-2; See page 8.2.01
SYMBOL
2
1 CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.01
De-energized 32 cSt oil at 40°C
TO ORDER
8.6
Voltage 0 12 24 11 22
-
Without coil 12 V DC 24 V DC 110V RAC 220V RAC
Seals N - Buna N V - Viton A
PRESSURE DROP bar
EV06-2K
6.9 5.2 3.4 1.7
3.8
Terminations DIN 43650 See page 8.1.01
7.5 FLOW L/min.
1.7.01
11.4
SOLENOID VALVE EV56-2K
DESCRIPTION Ø32
A solenoid-operated, 2-way, normally open, direct-acting, spool-type, screw-in hydraulic cartridge valve designed to function as a bidirectional blocking valve in low flow circuits.
87
OPERATION When de-energized, the EV56-2K allows flow in both directions. When energized, the valve's spool shifts to close bidirectionally.
S24 30Nm±10%
28
2
RATINGS
Ø12.7
1
3/4-16UNF-2A
SYMBOL
Operating Pressure: 200 bar Flow: 8l/min max Internal Leakage: 82 cc/minute max. at 200 bar Temperature: -20 to 90°C with standard Buna N seals Coil Duty Rating: Continuous from 85 % to 115 % of nominal voltage Minimum Pull-in Voltage: 85 % of nominal at 200 bar Filtration: Recommend 10 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC06-2; See page 8.2.01
2
1 CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.01 De-energized 32 cSt oil at 40°C
TO ORDER 8.6
Voltage 0 12 24 11 22
-
Without coil 12 V DC 24 V DC 110V RAC 220V RAC
Seals N - Buna N V - Viton A
PRESSURE DROP bar
EV56-2E
6.9 5.2 3.4 1.7
Terminations DIN 43650 See page 8.1.01
3.8
7.5 FLOW L/min.
1.7.02
11.4
SOLENOID VALVE EV08-2K
DESCRIPTION
Ø42
A solenoid-operated, 2-way, normally open, direct-acting, spool-type, screw-in hydraulic cartridge valve designed to function as a bidirectional blocking valve in low flow circuits.
9
OPERATION When de-energized, the EV08-2K allows flow in both directions. When energized, the valve's spool shifts to close bidirectionally.
S24 30Nm±10%
28
2
RATINGS
1
Ø15.87 3/4-16UNF-2A
SYMBOL
2
Operating Pressure: 250 bar Flow: 8 L/min max. Internal Leakage: 82 cc/minute max. at 250 bar Temperature: -20 to 90°C with standard Buna seals Coil Duty Rating: Continuous from 85 % to 115 % of nominal voltage Minimum Pull-in Voltage: 85 % of nominal at 250 bar Filtration: Recommend 10 µm nominal Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC08-2; See page 8.2.01
1 CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.01
De-energized 32 cSt oil at 40°C
TO ORDER
8.6
Voltage 0 12 24 11 22
-
Without coil 12 V DC 24 V DC 110V RAC 220V RAC
Seals N - Buna N V - Viton A
PRESSURE DROP bar
EV08-2K
6.9 5.2 3.4 1.7
3.8
Terminations DIN 43650 See page 8.1.01
7.5 FLOW L/min.
1.7.03
11.4
SOLENOID VALVE EV10-2K
Ø42
DESCRIPTION A solenoid-operated, 2-way, normally open, direct-acting, spool-type, screw-in hydraulic cartridge valve, designed to function as a bidirectional blocking valve.
97
OPERATION When de-energized, the EV10-2K allows flow in both directions. When energized, the cartridge's spool shifts to close the bidirectional flow path.
S27
31.8
30Nm±10%
2 RATINGS
1
Ø15.87 7/8-14UNF-2A
SYMBOL
2
Operating Pressure: 210 bar Flow: See Performance Chart Internal Leakage: 80 cc/minute max. at 210 bar Temperature: -20 to 90°C with standard Buna seals Coil Duty Rating: Continuous from 85 % to 115 % of nominal voltage Minimum Pull-in Voltage: 85 % of nominal at 210 bar Filtration: Recommend 25 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC10-2; See page 8.2.04
1 CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.04 De-energized
TO ORDER
32cSt oil at 40°C
Voltage 0 12 24 11 22
-
Without coil 12 V DC 24 V DC 110V RAC 220V RAC
Seals N - Buna N V - Viton A
PRESSURE DROP bar
EV10-2K
6.9 5.5 4.1 2.8 1.4 7.5
15.1
FLOW L/min.
Terminations DIN 43650 See page 8.1.01
1.7.04
22.7
SOLENOID VALVE EV06-2L
DESCRIPTION Ø42 A solenoid-operated, 2-way, normally closed, direct-acting, spool-type, screw-in hydraulic cartridge valve, designed to operate as a bidirectional blocking valve in low flow circuits.
9
OPERATION
S24
28
2
30Nm±10%
Ø12.7
1
3/4-16UNF-2A
SYMBOL
When de-energized, the EV06-2L blocks flow in both directions. When energized, the cartridge’s spool shifts to open the bidirectional flow path.
RATINGS Operating Pressure: 250 bar Flow: 10 L/min max. Internal Leakage: 82 cc/minute max. at 250 bar Temperature: -20 to 90°C with standard Buna seals Coil Duty Rating: Continuous from 85 % to 115 % of nominal voltage Minimum Pull-in Voltage: 85 % of nominal at 250 bar Filtration: Recommend 10 µm nominal Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC06-2; See page 8.2.01
2
1 CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.01 Energized
TO ORDER
32 cSt oil at 40°C 8.6
Voltage 0 12 24 11 22
-
Without coil 12 V DC 24 V DC 110V RAC 220V RAC
Seals N - Buna N V - Viton A
PRESSURE DROP bar
EV06-2L
6.9 5.2 3.4 1.7
Terminations DIN 43650 See page 8.1.01
3.8
7.5 FLOW L/min.
1.8.01
11.4
SOLENOID VALVE EV56-2L
DESCRIPTION Ø32
A solenoid-operated, 2-way, normally closed, direct-acting, spool-type, screw-in hydraulic cartridge valve, designed to operate as a bidirectional blocking valve in low flow circuits.
87
OPERATION When de-energized, the EV56-2L blocks flow in both directions. When energized, the cartridge’s spool shifts to open the bidirectional flow path.
S24 30Nm±10%
28
2
RATINGS
Ø12.7
1
3/4-16UNF-2A
SYMBOL
Operating Pressure: 200 bar Flow: 10 L/min max Internal Leakage: 82 cc/minute max. at 200 bar Temperature: -20 to 90°C with standard Buna N seals Coil Duty Rating: Continuous from 85 % to 115 % of nominal voltage Minimum Pull-in Voltage: 85 % of nominal at 200 bar Filtration: Recommend 10 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC06-2; See page 8.2.01
2
1 CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.01
Energized 32 cSt oil at 40°C
TO ORDER
8.6
Voltage 0 12 24 11 22
-
Without coil 12 V DC 24 V DC 110V RAC 220V RAC
Seals N - Buna N V - Viton A
PRESSURE DROP bar
EV56-2L
Terminations DIN 43650 See page 8.1.01
6.9 5.2 3.4 1.7
3.8
7.5 FLOW L/min.
1.8.02
11.4
SOLENOID VALVE EV08-2L
DESCRIPTION
Ø42
A solenoid-operated, 2-way, normally closed, direct-acting, spool-type, screw-in hydraulic cartridge valve, designed to operate as a bidirectional blocking valve in low flow circuits.
OPERATION 9
When de-energized, the EV08-2L blocks flow in both directions. When energized, the cartridge’s spool shifts to open the bidirectional flow path. S24 30Nm±10%
28
2 1
Ø15.87 3/4-16UNF-2A
SYMBOL
RATINGS Operating Pressure: 250 bar Flow: 10 L/min max. Internal Leakage: 82 cc/minute max. at 250 bar Temperature: -20 to 90°C with standard Buna seals Coil Duty Rating: Continuous from 85 % to 115 % of nominal voltage Minimum Pull-in Voltage: 85 % of nominal at 250 bar Filtration: Recommend 10 µm nominal Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC08-2; See page 8.2.01
2
1 CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.01 Energized
TO ORDER
32 cSt oil at 40°C 8.6
Voltage 0 12 24 11 22
-
Without coil 12 V DC 24 V DC 110V RAC 220V RAC
Seals N - Buna N V - Viton A
PRESSURE DROP bar
EV08-2L
6.9 5.2 3.4 1.7
Terminations DIN 43650 See page 8.1.01
3.8
7.5 FLOW L/min.
1.8.03
11.4
SOLENOID VALVE EV10-2L
Ø42
DESCRIPTION A solenoid-operated, 2-way, normally closed, direct-acting, spool-type, screw-in hydraulic cartridge valve, designed to operate as a bidirectional blocking valve.
97
OPERATION When de-energized, the EV10-2L blocks flow in both directions. When energized, the cartridge's spool shifts to open the bidirectional flow path.
S27
31.8
30Nm±10%
2 RATINGS
1
Ø15.87 7/8-14UNF-2A
SYMBOL
2
Operating Pressure: 210 bar Flow: See Performance Chart Internal Leakage: 80 cc/minute max. at 210 bar Temperature: -20 to 90°C with standard Buna seals Coil Duty Rating: Continuous from 85 % to 115 % of nominal voltage Minimum Pull-in Voltage: 85 % of nominal at 210 bar Filtration: Recommend 25 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC10-2; See page 8.2.04
1 CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.04 Energized 32cSt oil at 40°C
TO ORDER 8.3
Voltage 0 12 24 11 22
-
Without coil 12 V DC 24 V DC 110V RAC 220V RAC
Seals N - Buna N V - Viton A
PRESSURE DROP bar
EV10-2L
6.9 5.5 4.1 2.8 1.4 15.1
30.2
FLOW L/min.
Terminations DIN 43650 See page 8.1.01
1.8.04
45.4
60.6
SOLENOID VALVE EV08-3A
Ø42
DESCRIPTION A solenoid-operated, 3-way, direct-acting, spool-type, screw-in hydraulic cartridge valve.
106.5
OPERATION When de-energized, the EV08-3A allows flow from 2 to 1, while blocking flow at 3. When energized, the cartridge's spool shifts to open from 2 to 3, while blocking at 1.
S24 30Nm±10%
43.5
3 2 1
RATINGS
Ø14.3 Ø15.87 3/4-16UNF-2A
SYMBOL
2
3
Operating Pressure: 210 bar Flow: 8 L/min. max. Internal Leakage: 82 cc/minute max. at 210 bar Temperature: -20 to 90°C with standard Buna seals Coil Duty Rating: Continuous from 85 % to 115 % of nominal voltage Minimum Pull-in Voltage: 85 % of nominal at 210 bar Filtration: Recommend 10 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC08-3A; See page 8.2.02
1
CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.02 2 to 1
TO ORDER
32cSt oil at 40°C
EV08-3A
0 12 24 11 22
-
Without coil 12 V DC 24 V DC 110V RAC 220V RAC
8.6
Seals N - Buna N V - Viton A
PRESSURE DROP bar
Voltage
3 to 2
6.9 5.2 3.4 1.7
Terminations DIN 43650 See page 8.1.01 3.8
7.5 FLOW L/min.
1.9.01
11.4
SOLENOID VALVE EV58-3A
Ø32
DESCRIPTION A solenoid-operated, 3-way, direct-acting, spool-type, screw-in hydraulic cartridge valve.
102.5
OPERATION When de-energized, the EV58-3A allows flow from 2 to 1, while blocking flow at 3. When energized, the cartridge's spool shifts to open from 2 to 3, while blocking at 1.
S24 30Nm±10%
43.5
3 2 1
RATINGS
Ø14.3 Ø15.87 3/4-16UNF-2A
SYMBOL
2
3
Operating Pressure: 210 bar Flow: 8 L/min. max. Internal Leakage: 82 cc/minute max. at 210 bar Temperature: -20 to 90°C with standard Buna seals Coil Duty Rating: Continuous from 85 % to 115 % of nominal voltage Minimum Pull-in Voltage: 85 % of nominal at 210 bar Filtration: Recommend 10 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC08-3A; See page 8.2.03
1
CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.03 2 to 1
TO ORDER
32cSt oil at 40°C
EV58-3A
0 12 24 11 22
-
Without coil 12 V DC 24 V DC 110V RAC 220V RAC
8.6
Seals N - Buna N V - Viton A
PRESSURE DROP bar
Voltage
3 to 2
6.9 5.2 3.4 1.7
Terminations DIN 43650 See page 8.1.01 3.8
7.5 FLOW L/min.
1.9.02
11.4
SOLENOID VALVE EV10-3A
Ø42
DESCRIPTION A solenoid-operated, 3-way, direct-acting, spool-type, screw-in hydraulic cartridge valve.
107
OPERATION
46
S27
When de-energized, the EV10-3A allows flow from 2 to 1, while blocking flow at 3. When energized, the cartridge's spool shifts to open from 2 to 3, while blocking at 1.
30Nm±10%
3 2
RATINGS
1
Ø15.87
Ø17.5 7/8-14UNF-2A
SYMBOL
2
3
Operating Pressure: 210 bar Flow: 23L/min. max. Internal Leakage: 110 cc/minute max. at 210 bar Temperature: -20 to 90°C with standard Buna seals Coil Duty Rating: Continuous from 85 % to 115 % of nominal voltage Minimum Pull-in Voltage: 85 % of nominal at 210 bar Filtration: Recommend 10 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC10-3; See page 8.2.04
1
CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.04 2 to 3
TO ORDER
32cSt oil at 40°C
EV10-3A
0 12 24 11 22
-
Without coil 12 V DC 24 V DC 110V RAC 220V RAC
10.3
Seals N - Buna N V - Viton A
PRESSURE DROP bar
Voltage
2 to 1
8.3 6.2 4.1 2.1
Terminations DIN 43650 See page 8.1.01 7.5
15.1 FLOW L/min.
1.9.03
22.7
SOLENOID VALVE EV08-3C
Ø42
DESCRIPTION A solenoid-operated, 3-way, direct-acting, spool-type, screw-in hydraulic cartridge valve.
103.8
OPERATION When de-energized, the EV08-3C allows flow from 2 to 1, while blocking flow at 3. When energized, the cartridge's spool shifts to open from 1 to 3, while blocking at 2.
S24 30Nm±10%
40.8
3 2 1
RATINGS
Ø14.3 Ø15.87 3/4-16UNF-2A
SYMBOL
2
3
Operating Pressure: 210 bar Flow: 8 L/min. max. Internal Leakage: 82 cc/minute max. at 210 bar Temperature: -20 to 90°C with standard Buna seals Coil Duty Rating: Continuous from 85 % to 115 % of nominal voltage Minimum Pull-in Voltage: 85 % of nominal at 210 bar Filtration: Recommend 10 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC08-3; See page 8.2.03
1
CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.03 2 to 1
TO ORDER
32cSt oil at 40°C
EV08-3C
0 12 24 11 22
-
Without coil 12 V DC 24 V DC 110V RAC 220V RAC
8.6
Seals N - Buna N V - Viton A
PRESSURE DROP bar
Voltage
3 to 1
6.9 5.2 3.4 1.7
Terminations DIN 43650 See page 8.1.01 3.8
7.5 FLOW L/min.
1.10.01
11.4
SOLENOID VALVE EV58-3C
DESCRIPTION
Ø32
A solenoid-operated, 3-way, direct-acting, spool-type, screw-in hydraulic cartridge valve.
99.8
OPERATION When de-energized, the EV58-3C allows flow from 2 to 1, while blocking flow at 3. When energized, the cartridge's spool shifts to open from 1 to 3, while blocking at 2.
S24 30Nm±10%
40.8
3 2 1
RATINGS
Ø14.3 Ø15.87 3/4-16UNF-2A
SYMBOL
2
3
Operating Pressure: 210 bar Flow: 8 L/min. max. Internal Leakage: 82 cc/minute max. at 210 bar Temperature: -20 to 90°C with standard Buna seals Coil Duty Rating: Continuous from 85 % to 115 % of nominal voltage Minimum Pull-in Voltage: 85 % of nominal at 210 bar Filtration: Recommend 10 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC08-3; See page 8.2.03
1
CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.03 2 to 1
TO ORDER
32cSt oil at 40°C
EV58-3C
0 12 24 11 22
-
Without coil 12 V DC 24 V DC 110V RAC 220V RAC
8.6
Seals N - Buna N V - Viton A
PRESSURE DROP bar
Voltage
3 to 1
6.9 5.2 3.4 1.7
Terminations DIN 43650 See page 8.1.01 3.8
7.5 FLOW L/min.
1.10.02
11.4
SOLENOID VALVE EV10-3C
Ø42
DESCRIPTION A solenoid-operated, 3-way, direct-acting, spool-type, screw-in hydraulic cartridge valve.
OPERATION 107
When de-energized, the EV10-3C allows flow from 2 to 1, while blocking flow at 3. When energized, the cartridge's spool shifts to open from 1 to 3, while blocking at 2.
46
S27 30Nm±10%
3 2 1
Ø15.87
Ø17.5 7/8-14UNF-2A
SYMBOL
RATINGS Operating Pressure: 210 bar Flow: 23L/min. max. Internal Leakage: 80 cc/minute max. at 210 bar Temperature: -20 to 90°C with standard Buna seals Coil Duty Rating: Continuous from 85 % to 115 % of nominal voltage Minimum Pull-in Voltage: 85 % of nominal at 210 bar Filtration: Recommend 10 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC10-3; See page 8.2.04
2 PERFORMANCE (Cartridge Only) 2 to 1 (d) 1 to 3 (e) 32cSt oil at 40°C
1 PRESSURE DROP bar
3 CAVITY
See page 8.2.04
TO ORDER
8.6 6.9 5.2 3.4 1.7
EV10-3C
0 12 24 11 22
-
Without coil 12 V DC 24 V DC 110V RAC 220V RAC
Seals N - Buna N V - Viton A
Terminations DIN 43650 See page 8.1.01
OPERATING PRESSURE bar
Voltage
7.5
15.1 FLOW L/min.
22.7
Performance Range inlet at 1 inlet at 3 or 2 280 210 140 70 3.8
1.10.03
7.5 11.4 15.1 18.9 OPERATING FLOW L/min.
22.7
26.5
SOLENOID VALVE EV08-3D
Ø42
DESCRIPTION A solenoid-operated, 3-way, direct-acting, spool-type, screw-in hydraulic cartridge valve.
103.8
OPERATION When de-energized, the EV08-3D allows flow from 3 to 1, while blocking flow at 2. When energized, the cartridge's spool shifts to open from 2 to 3, while blocking at 1.
S24 30Nm±10%
40.8
3 2 1
RATINGS
Ø14.3 Ø15.87 3/4-16UNF-2A
SYMBOL
2
3
Operating Pressure: 210 bar Flow: 8 L/min. max. Internal Leakage: 82 cc/minute max. at 210 bar Temperature: -20 to 90°C with standard Buna seals Coil Duty Rating: Continuous from 85 % to 115 % of nominal voltage Minimum Pull-in Voltage: 85 % of nominal at 210 bar Filtration: Recommend 10 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC08-3; See page 8.2.03
1
CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.03 3 to 1
TO ORDER
32cSt oil at 40°C
EV08-3D
0 12 24 11 22
-
Without coil 12 V DC 24 V DC 110V RAC 220V RAC
Seals N - Buna N V - Viton A
PRESSURE DROP bar
Voltage
8.6 6.9 5.2 3.4 1.7
Terminations DIN 43650 See page 8.1.01 3.8
7.5 FLOW L/min.
1.11.01
11.4
SOLENOID VALVE EV58-3D
DESCRIPTION
Ø32
A solenoid-operated, 3-way, direct-acting, spool-type, screw-in hydraulic cartridge valve.
99.8
OPERATION When de-energized, the EV58-3D allows flow from 3 to 1, while blocking flow at 2. When energized, the cartridge's spool shifts to open from 2 to 3, while blocking at 1.
S24 30Nm±10%
40.8
3 2 1
RATINGS
Ø14.3 Ø15.87 3/4-16UNF-2A
SYMBOL
2
3
Operating Pressure: 210 bar Flow: 8 L/min. max. Internal Leakage: 82 cc/minute max. at 210 bar Temperature: -20 to 90°C with standard Buna seals Coil Duty Rating: Continuous from 85 % to 115 % of nominal voltage Minimum Pull-in Voltage: 85 % of nominal at 210 bar Filtration: Recommend 10 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC08-3; See page 8.2.03
1
CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.03 3 to 1
TO ORDER
32cSt oil at 40°C
EV58-3D
0 12 24 11 22
-
Without coil 12 V DC 24 V DC 110V RAC 220V RAC
Seals N - Buna N V - Viton A
PRESSURE DROP bar
Voltage
8.6 6.9 5.2 3.4 1.7
Terminations DIN 43650 See page 8.1.01 3.8
7.5 FLOW L/min.
1.11.02
11.4
SOLENOID VALVE EV10-3D
Ø42
DESCRIPTION A solenoid-operated, 3-way, direct-acting, spool-type, screw-in hydraulic cartridge valve.
OPERATION 107
When de-energized, the EV10-3D allows flow from 3 to 1, while blocking flow at 2. When energized, the cartridge's spool shifts to open from 1 to 2, while blocking at 3.
46
S27 30Nm±10%
3 2 1
Ø15.87
Ø17.5 7/8-14UNF-2A
SYMBOL
RATINGS Operating Pressure: 210 bar Flow: 23L/min. max. Internal Leakage: 80 cc/minute max. at 210 bar Temperature: -20 to 90°C with standard Buna seals Coil Duty Rating: Continuous from 85 % to 115 % of nominal voltage Minimum Pull-in Voltage: 85 % of nominal at 210 bar Filtration: Recommend 25 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC10-3; See page 8.2.04
2
3
1
CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.04 3 to 1 (d)
TO ORDER
0 12 24 11 22
-
Without coil 12 V DC 24 V DC 110V RAC 220V RAC
Seals N - Buna N V - Viton A
PRESSURE DROP bar
EV10-3D
Voltage
1 to 2 (e)
32cSt oil at 40°C 8.6 6.9 5.2 3.4 1.7 3.8
Terminations DIN 43650 See page 8.1.01
1.11.03
7.5 11.4 FLOW L/min.
15.1
18.9
SOLENOID VALVE EV08-4A
Ø42
DESCRIPTION A solenoid-operated, 4-way, 2-position, direct-acting spool-type, screw-in hydraulic cartridge valve.
118.5
OPERATION S24
When de-energized, the EV08-4A flow paths are 3 to 2, and 4 to 1. When energized, the valve's spool shifts to open 3 to 4, and 2 to 1. All ports are open at cross-over.
30Nm±10%
55.5
4 3
RATINGS
2
Operating Pressure: 210 bar Flow: 8 L/min max Internal Leakage: 82 cc/minute max. at 210 bar Temperature: -20 to 90°C with standard Buna seals Coil Duty Rating: Continuous from 85 % to 115 % of nominal voltage
Ø12.7
1
Ø14.3 Ø15.87 3/4-16UNF-2A
Minimum Pull-in Voltage: 85 % of nominal at 210 bar Filtration: Recommend 10 µm nominal Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: VC08-4; See page 8.2.03
SYMBOL
2
4
3
1
CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.03 3 to 4
TO ORDER
32cSt oil at 40°C
0 12 24 11 22
-
Without coil 12 V DC 24 V DC 110V RAC 220V RAC
Seals N - Buna N V - Viton A
PRESSURE DROP bar
10
EV08-4A
Voltage
; 2 to 1 --
8 6 4 2
Terminations DIN 43650 See page 8.1.01
2
4 FLOW L/min.
1.12.01
6
8
SOLENOID VALVE EV58-4A
Ø32
DESCRIPTION A solenoid-operated, 4-way, 2-position, direct-acting spool-type, screw-in hydraulic cartridge valve.
OPERATION 115.5
S24
When de-energized, the EV58-4A flow paths are 3 to 2, and 4 to 1. When energized, the valve's spool shifts to open 3 to 4, and 2 to 1. All ports are open at cross-over.
30Nm±10%
55.5
4 3
RATINGS
2
Operating Pressure: 210 bar Flow: 8 L/min max Internal Leakage: 82 cc/minute max. at 210 bar Temperature: -20 to 90°C with standard Buna seals Coil Duty Rating: Continuous from 85 % to 115 % of nominal voltage
Ø12.7
1
Ø14.3 Ø15.87 3/4-16UNF-2A
Minimum Pull-in Voltage: 85 % of nominal at 210 bar Filtration: Recommend 10 µm nominal Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: VC08-4; See page 8.2.03
SYMBOL
2
4
3
1
CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.03 3 to 4
TO ORDER
32cSt oil at 40°C
0 12 24 11 22
-
Without coil 12 V DC 24 V DC 110V RAC 220V RAC
Seals N - Buna N V - Viton A
PRESSURE DROP bar
10
EV58-4A
Voltage
; 2 to 1 --
8 6 4 2
Terminations DIN 43650 See page 8.1.01
2
4 FLOW L/min.
1.12.02
6
8
SOLENOID VALVE EV10-4A
Ø42
DESCRIPTION A solenoid-operated, 4-way, 2-position, direct-acting, spool-type, screw-in hydraulic cartridge valve.
119
S27 30Nm±10%
62
4
OPERATION When de-energized, the EV10-4A allows flow from 3 to 2, as well as from 4 to 1. When energized, the cartridge's spool shifts to open 3 to 4, and 2 to 1.
3 2
RATINGS
1
Operating Pressure: 210 bar Flow: 23L/min. max. Internal Leakage: 60 cc/minute max. at 210 bar Temperature: -20 to 90°C with standard Buna seals Coil Duty Rating: Continuous from 85 % to 115 % of nominal voltage Minimum Pull-in Voltage: 85 % of nominal at 210 bar Filtration: Recommend 25 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC10-4; See page 8.2.05
Ø15.87 Ø17.5
Ø19.05 7/8-14UNF-2A
SYMBOL
2
4
3
1
CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.05
4 to 1
32cSt oil at 40°C
TO ORDER 8.6
0 12 24 11 22
-
Without coil 12 V DC 24 V DC 110V RAC 220V RAC
Seals N - Buna N V - Viton A
PRESSURE DROP bar
EV10-4A
Voltage
3 to 2
6.9 5.2 3.4 1.7
7.5
Terminations DIN 43650 See page 8.1.01
15.1 FLOW L/min.
1.12.03
22.7
RELIEF VALVE RV06-2A
DESCRIPTION
S3
A screw-in, cartridge-style, direct-acting, poppet-type, hydraulic relief valve intended
S17
for lower flow circuits requiring low internal leakage.
71 max.
OPERATION S24
28
30Nm±10%
2
The RV06-2A blocks flow from 1 to 2 until sufficient pressure is present at 1 to force the spring-opposed poppet from its seat.
RATINGS Operating Pressure: 250 bar
1
Flow: The Performance Chart illustrates flow handling capacity at max. setting for
12.7 3/4-16UNF-2A
each spring range option. Pressure rise will vary with spring (range) and with setting within range due to flow forces. Internal Leakage: 0.25 cc/minute at 200 bar max. to 75
% of nominal setting
Standard Spring Range: 10 to 80 bar 40 to 160 bar 80 to 250 bar
SYMBOL
Temperature: -20 to 90°C with standard Buna seals Filtration: Recommend 25 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt
1
Installation: No restrictions Cavity: CC06-2; See page 8.2.01
2 CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.01 Flow Characteristic
TO ORDER
32cSt oil at 40°C
RV06-2A
Seals 8 - 10...80bar
N - Buna N
16 - 40...160bar
V - Viton A
25 - 80...250bar
PRESSURE DROP bar
250 200 150 100 50
5
10 FLOW L/min.
2.1.01
15
20
RELIEF VALVE RV08-2A
2.1.02
CHECK VALVE CV08-2A
Ø24
S6 30Nm±10%
DESCRIPTION A screw-in, cartridge-style, hydraulic check valve for use as a blocking or load-holding device.
OPERATION
28
45
3/4-16UNF-2A
2
The CV08-2A allows flow age from 2 to 1, while normally blocking oil flow in the opposite direction. The cartridge has a fully guided poppet which is spring-biased closed until sufficient pressure is applied at 2 to open to 1.
RATINGS
1 Ø15.87
Operating Pressure: 250 bar Flow: See Performance Chart Internal Leakage: 0.25 cc/minute max. at 250 bar Standard Bias Spring: 1.2 bar Temperature: -20 to 90°C Filtration: Recommend 25 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC08-2; See page 8.2.01
SYMBOL
2
1 CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.01
TO ORDER
1 to 2 32 cSt oil at 40°C
CV08-2A 6.9 PRESSURE DROP bar
Seals N - Buna N V - Viton A
5.2 3.4 1.7 7.5
15.1 FLOW L/min.
3.1.01
22.7
CHECK VALVE CV08-2B
DESCRIPTION S24
A screw-in, cartridge-style, hydraulic check valve for use as a blocking or load-holding device.
30Nm±10%
28
36
OPERATION
2
1 Ø15.87 3/4-16UNF-2A
SYMBOL
1
The CV08-2B allows flow age from 1 to 2, while normally blocking oil flow in the opposite direction. The cartridge has a fully guided poppet which is spring-biased closed until sufficient pressure is applied at 1 to open to 2.
RATINGS Operating Pressure: 250 bar Flow: See Performance Chart Internal Leakage: 0.25 cc/minute max. at 250 bar Standard Bias Spring: 1.2 bar Temperature: -20 to 90°C Filtration: Recommend 25 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC08-2; See page 8.2.01
2 CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.01
TO ORDER
1 to 2 32 cSt oil at 40°C
CV08-2B
N - Buna N V - Viton A
PRESSURE DROP bar
6.9 Seals
5.2 3.4 1.7 7.5
15.1 FLOW L/min.
3.2.01
22.7
30.2
CHECK VALVE CV10-2B
S27 30Nm±10%
DESCRIPTION A screw-in, cartridge-style, hydraulic check valve for use as a blocking or load-holding device.
31.8
4
OPERATION
2 1
7/8-14UNF-2A
The CV10-2B allows flow age from 1 to 2, while normally blocking oil flow in the opposite direction. The cartridge has a fully guided poppet which is spring-biased closed until sufficient pressure is applied at 1 to open to 2.
Ø15.87
RATINGS
SYMBOL
1
Operating Pressure: 250 bar Flow: See Performance Chart Internal Leakage: 0.25 cc/minute max. at 250 bar Standard Bias Spring: 2.1 bar Temperature: -20 to 90°C Filtration: Recommend 25 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC10-2; See page 8.2.04
2 CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.04 1 to 2 32 cSt oil at 40°C
TO ORDER 8.6
CV10-2B
6.9 PRESSURE DROP bar
Seals N - Buna N V - Viton A
5.2 3.4 1.7 18.9
37.9 FLOW L/min.
3.2.02
56.8
75.8
CHECK PILOT-TO-OPEN V08-3A
S24 30Nm±10%
DESCRIPTION A screw-in, cartridge-style, pilot-operated, hydraulic check valve for use in blocking or load-holding circuits.
53.5
OPERATION 41.5
3 2
The V08-3A allows flow from 2 to 3, while normally blocking flow from 3 to 2. Flow will be allowed from 3 to 2 when sufficient pressure is applied at 1. The cartridge has a 3:1 pilot ratio, meaning that at least one-third of the load pressure held at 3 is required at 1 to open the valve. The check is spring-biased to assure holding in static or no-load conditions. A sealed pilot piston option is available.
1 ø14.3
RATINGS
ø15.87
Operating Pressure: 250 bar Flow: See Performance Chart Internal Leakage: 1 to 2: 0.25 cc/minute max. at 250 bar 2 to 1 (without sealed piston): 115 cc/minute max. at 250 bar Pilot Ratio: 3:1 Check Spring Bias: 2 bar Temperature: -20 to 90°C with standard Buna seals Filtration: Recommend 25 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to
3/4-16UNF-2A
SYMBOL
3
420 cSt Installation: No restrictions Cavity: CC08-3; See page 8.2.02
1
2 CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.02
3 to
2
2 to
3
32cSt oil at 40°C
TO ORDER 8.6
Seals N - Buna N V - Viton A
PRESSURE DROP bar
V08-3A
6.9 5.2 3.4 1.7
7.5
15.4 FLOW L/min.
3.3.01
22.7
30
CHECK PILOT-TO-OPEN V08-3B
S24
DESCRIPTION
30Nm±10%
A screw-in, cartridge-style, pilot-operated, hydraulic check valve for use in blocking or load-holding circuits.
3 41.5
49.7
OPERATION The V08-3B allows flow from 2 to 1, while normally blocking flow from 1 to 2. Flow will be allowed from 1 to 2 when sufficient pressure is applied at 3. The cartridge has a 3:1 pilot ratio, meaning that at least one-third of the load pressure held at 1 is required at 3 to open the valve.
2 1
RATINGS
Ø14.3
Operating Pressure: 210 bar Flow: See Performance Chart Internal Leakage: 1 to 2: 0.25 cc/minute max. at 210 bar Pilot Ratio: 3:1 Check Spring Bias: 4.8 bar Temperature: -20 to 90°C with standard Buna seals Filtration: Recommend 25 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to
Ø15.87 3/4-16UNF-2A
SYMBOL
420 cSt Installation: No restrictions Cavity: CC08-3; See page 8.2.02
1
3
2 CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.02 free flow;
TO ORDER
piloted open
32cSt oil at 40°C
V08-3B
8.6
N - Buna N V - Viton A
6.9 PRESSURE DROP bar
Seals
5.2 3.4 1.7
7.5
15.4 FLOW L/min.
3.4.01
22.7
30
LOAD SHUTTLE LSV10-3A
DESCRIPTION
S27
60
30Nm±10%
OPERATION The LSV10-3A will allow flow from the higher pressure 1 or 2 port to the 2 port. The valve is commonly used to direct oil from the pressure side of a bidirectional hydraulic motor to a pressure-released hydraulic brake.
3
45.8
A load-shuttling, screw-in, cartridge-style hydraulic check valve, for use in blocking circuits where a priority of flow/direction is given to a higher pressure circuit over a lower one.
2 1
Ø15.87
Ø17.5 7/8-14UNF-2A
SYMBOL
2 1
3
CAVITY
RATINGS Operating Pressure: 210 bar Flow: See Performance Chart Internal Leakage: 0.25 cc/minute max. at 210 bar Temperature: -20 to 90°C with standard Buna seals Filtration: Recommend 25 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC10-3; See page 8.2.04
PERFORMANCE (Cartridge Only)
See page 8.2.04 1 or 3 to 2 32 cSt oil at 40°C
TO ORDER LSV10-3A
Seals N - Buna N V - Viton A
PRESSURE DROP bar
17.2 13.8 10.3 6.9 3.4
7.5
15.1 FLOW L/min.
3.5.01
22.7
30.2
PILOTED 2-WAY SPOOL, EXTERNAL VENT HV10-3A
V
DESCRIPTION A screw-in, cartridge-style, pilot-operated, spool-type, normally open hydraulic directional valve for two-way circuits requiring remote pilot actuation. S27
72.5
30Nm±10%
In neutral (unpiloted), the HV10-3A allows flow from 3 to 2 bidirectionally. V is a spring chamber vent-to-atmosphere, which is internally O-ring sealed from the cartridge flow paths. On remote pilot signal at 1, the valve shifts to block 3 to 2 bidirectionally.
45.8
3 2 1
OPERATION
Ø15.87
Ø17.5 7/8-14UNF-2A
SYMBOL
3 1
V 2 CAVITY
RATINGS Operating Pressure: 240 bar Flow: See Performance Chart Internal Leakage: 82 cc/minute max. at 210 bar Pilot Pressure Required: To Full Spool Shift: for 4.1 bar spring: 4.7 bar for 7.6 bar spring: 8.6 bar Temperature: -20 to 90°C with standard Buna seals Filtration: Recommend 25 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC10-3; See page 8.2.04
PERFORMANCE (Cartridge Only)
See page 8.2.04 3 to 2
TO ORDER
32 cSt oil at 40°C
Seals N - Buna N V - Viton A
PRESSURE DROP bar
HV10-3A
6.9 5.2 3.4 1.7
7.5
15.1 FLOW L/min.
3.6.01
22.7
30.2
38
PLOTED LOGIC VALVE PLV10-SA
3.7.01
PRESSURE SEQUENCE VALVE PSV10-3A
4.1.01
PRESSURE SEQUENCE VALVE PSV10-3D
4.1.02
PRESSURE SEQUENCE VALVE PSV10-3D
4.1.03
NEEDLE VILVE NV06-2A
5.1.01
FLOW CONTROL VALVE FC08-2A
S4
DESCRIPTION A screw-in, cartridge-style, variable orifice, hydraulic flow control valve with reverse flow check.
(78)
OPERATION S24
The FC08-2A increases its orifice value from fully closed to fully open with counterclockwise adjustment rotation.
28
30Nm±10%
2 RATINGS
1 Ø15.87 3/4-16UNF-2A
SYMBOL
2
Operating Pressure: 240 bar Flow: 45 lpm nominal at 10 bar at full open Internal Leakage: 0.5 cc/minute max. at shut-off Temperature: -20 to 90°C Filtration: Recommend 25 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC08-2; See page 8.2.01
1 CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.01 Full Open
TO ORDER
Rev. Flow
32 cSt oil at 40°C 6.9
Seals N - Buna N V - Viton A
PRESSURE DROP bar
FC08-2A
5.2 3.4 1.7
7.5
11.4 FLOW L/min.
5.1.02
15.1
22.7
MANUAL SPRING RETURN VALVE MV08-2B
DESCRIPTION
Ø36
A manual, 2-way, pull-to-open, screw-in hydraulic directional valve.
75
OPERATION S24 30Nm±10% 28
2
The MP08-2B blocks flow from 2 to 1 until an operator pulls the shaft outward. Note: Pressure at port 1 will directly act on the spool and spring. Port 1 is intended to be a tank port only. The bias spring allows for up to 12.4 bar back-pressure at 1 before the valve will open.
1 Ø15.87 3/4-16UNF-2A
SYMBOL
2
RATINGS Operating Pressure: Port 2: 250 bar Port 1: 14 bar max. Flow: See Performance Chart Internal Leakage 2 to 1: 0.25 cc/minute max. at 250 bar Mechanical Pull Effort Required at Rated Pressure: 4.5 kg. initial; 7kg full shift Temperature: -40 to 120°C Filtration: Recommend 25 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC08-2; See page 8.2.01
1 CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.01
TO ORDER
2 to 1
MV08-2B
32cSt oil at 40°C
N - Buna N V - Viton A
PRESSURE DROP bar
Seals
6.9 5.2 3.4 1.7
7.5
15.1
22.7
30
FLOW L/min.
6.1.01
38
45
PRESSURE REDUCING VALVE PRV10-3A
7.1.01
SOLENOIDS FOR CARTRIDGE VALVES
EMA 100 46
A solenoid for hidraulic valves
4
30
50
DESCRIPTION
SOLENOID SPECIFICATIONS Push or pull as required Max. static pressure 400 bar Splash and dust-proof to IP65 DIN 40050 Power consumtion: EMA 100 - 18 or 20 W EMA 50 - 12, 14 or 19W Duty cycle ED 100%
ø16
Ø42
28
Hirschmann DIN43650
Warning: Normally closed valves (except for double locking valve) operate with DC and for AC coils. Normally open valves and double locking valves operate with DC coils only should a normally open solenoid valve be fitted
EMA 50
in a circuit fed by AC power a rectifier and a RAC coil
40
39
30
50
must be used.
Ø32
Ø13
28
Hirschmann DIN43650
VOLTAGE
Code
Solenoid
0
Without coil
12
12V DC
24
24V DC
11
110V RAC
22
220V RAC
8.1.01
CARTRIDGE CAVITIES
8.2.01
CARTRIDGE CAVITIES
8.2.02
CARTRIDGE CAVITIES
8.2.03
CARTRIDGE CAVITIES
8.2.04
CARTRIDGE CAVITIES
8.2.05
DESCRIPTION
Ø42
A solenoid-operated, 2-way, piloted, poppet-type, normally open, screw-in, hydraulic cartridge valve designed for low leakage in load-holding applications.
92
OPERATION
S24
28
2 1
30Nm±10%
When de-energized, the EV06-2A allows flow from 2 to 1. Flow from 1 to 2 is severely restricted in this mode. When energized, the valve's poppet closes on its seat, blocking flow from 2 to 1. In this mode the cartridge will allow 1 to 2 flow after overcoming the solenoid force.
Ø12.7
RATINGS
3/4-16UNF-2A
Operating Pressure: 250 bar Flow: See Performance Chart Internal Leakage: 0.25 cc/minute max. at 250 bar Temperature: -20 to 90°C with standard Buna N seals Coil Duty Rating: Continuous from 85 % to 115 % of nominal voltage Minimum Pull-in Voltage: 85 % of nominal at 250 bar Filtration: Recommend 25 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC06-2; See page 8.2.01
SYMBOL
2
1 CAVITY
PERFORMANCE (Carttridge Only)
See page 8.2.01 From 2 to 1
TO ORDER
32cSt oil at 40°C
EV06-2A
Voltage 0 12 24 11 22
-
Without coil 12 V DC 24 V DC 110V RAC 220V RAC
Seals N - Buna N V - Viton A
PRESSURE DROP bar
10.2
Terminations DIN 43650 See page 8.1.01
8.5 6.8 5.1 3.4 1.7 7.5
15.1 FLOW L/min.
1.1.01
22.7
SOLENOID VALVE EV08-2A
DESCRIPTION Ø42
A solenoid-operated, 2-way, piloted, poppet-type, normally open, screw-in, hydraulic cartridge valve designed for low leakage in load-holding applications.
OPERATION 92
When de-energized, the EV08-2A allows flow from 2 to 1. Flow from 1 to 2 is severely restricted in this mode. When energized, the valve's poppet closes on its seat, blocking flow from 2 to 1. In this mode the cartridge will allow 1 to 2 flow after overcoming the solenoid force.
S24 30Nm±10%
28
2
RATINGS
1
Operating Pressure: 250 bar Flow: See Performance Chart Internal Leakage: 0.25 cc/minute max. at 250 bar Temperature: -20 to 90°C with standard Buna N seals Coil Duty Rating: Continuous from 85 % to 115 % of nominal voltage Minimum Pull-in Voltage: 85 % of nominal at 250 bar Filtration: Recommend 25 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC08-2; See page 8.2.01
Ø15.87 3/4-16UNF-2A
SYMBOL
2
1 CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.01 From 2 to 1
TO ORDER
32cSt oil at 40°C
EV08-2A
Voltage 0 12 24 11 22
-
Without coil 12 V DC 24 V DC 110V RAC 220V RAC
Seals N - Buna N V - Viton A
PRESSURE DROP bar
10.2
Terminations DIN 43650 See page 8.1.01
8.5 6.8 5.1 3.4 1.7 7.5
15.1 FLOW L/min.
1.1.02
22.7
SOLENOID VALVE EV10-2A
DESCRIPTION
Ø42
A solenoid-operated, 2-way, piloted, poppet-type, normally open, screw-in, hydraulic cartridge valve designed for low leakage in load-holding applications.
OPERATION
Ø15.87
RATINGS
101
2
When de-energized, the EV10-2A allows flow from 2 to 1. Flow from 1 to 2 is severely restricted in this mode. If the 1 to 2 path is required, see model EV10-2F, page 1.6.03 When energized, the valve's poppet closes on its seat, blocking flow in the 2 to 1 direction. In this mode the cartridge will allow 1 to 2 flow after overcoming the solenoid force
S27 31.8
30Nm±10%
1
7/8-14UNF-2A
SYMBOL
2
Operating Pressure: 210 bar Flow: See Performance Chart Internal Leakage: 0.25 cc/minute max. at 210 bar Temperature: -20 to 90°C with standard Buna seals Coil Duty Rating: Continuous from 85 % to 115 % of nominal voltage Minimum Pull-in Voltage: 85 % of nominal at 210 bar Filtration: Recommend 25 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC10-2; See page 8.2.04
1 CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.04 1 to 2(e)
TO ORDER
2 to 1(d)
32cSt oil at 40°C
Voltage 0 12 24 11 22
-
Without coil 12 V DC 24 V DC 110V RAC 220V RAC
Seals N - Buna N V - Viton A
PRESSURE DROP bar
EV10-2A 8.6 6.9 5.2 3.4 1.7 11.4
Terminations DIN 43650 See page 8.1.01
22.7
34.1
FLOW L/min.
1.1.03
45.4
56.8
SOLENOID VALVE EV06-2B
DESCRIPTION Ø42
A solenoid-operated, 2-way, normally closed, piloted poppet-type, screw-in hydraulic cartridge valve, intended to act as a blocking or load-holding device for low flow circuits.
83
OPERATION
S24
28
2 1
30Nm±10%
When de-energized, the EV06-2B acts as a check valve, allowing flow from 1 to 2, while blocking flow from 2 to 1. When energized, the cartridge's poppet lifts to open the 2 to 1 flow path. In this mode, flow from 1 to 2 is severely restricted.
Ø12.7
RATINGS
3/4-16UNF-2A
Operating Pressure: 250 bar Flow: See Performance Chart Internal Leakage: 0.25 cc/minute max. at 250 bar Temperature: -20 to 90°C with standard Buna N seals Coil Duty Rating: Continuous from 85 % to 115 % of nominal voltage Minimum Pull-in Voltage: 85 % of nominal at 250 bar Filtration: Recommend 25 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC06-2; See page 8.2.01
SYMBOL
2
1 CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.01 From 2 to 1
TO ORDER
32cSt oil at 40°C
EV06-2B
Voltage 0 12 24 11 22
-
Without coil 12 V DC 24 V DC 110V RAC 220V RAC
Seals N - Buna N V - Viton A
PRESSURE DROP bar
10.3 8.6 6.9 5.2 3.4 1.7
Terminations DIN 43650 See page 8.1.01
11.4 FLOW L/min.
1.2.01
22.7
SOLENOID VALVE EV56-2B
DESCRIPTION Ø32
A solenoid-operated, 2-way, normally closed, piloted poppet-type, screw-in hydraulic cartridge valve, intended to act as a blocking or load-holding device for low flow circuits.
87
OPERATION
S24 30Nm±10%
28
2 Ø12.7
1
When de-energized, the EV56-2B acts as a check valve, allowing flow from 1 to 2, while blocking flow from 2 to 1. When energized, the cartridge's poppet lifts to open the 2 to 1 flow path. In this mode, flow from 1 to 2 is severely restricted.
RATINGS
3/4-16UNF-2A
SYMBOL
2
Operating Pressure: 200 bar Flow: See Performance Chart Internal Leakage: 0.25 cc/minute max. at 200 bar Temperature: -20 to 90°C with standard Buna N seals Coil Duty Rating: Continuous from 85 % to 115 % of nominal voltage Minimum Pull-in Voltage: 85 % of nominal at 200 bar Filtration: Recommend 25 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC06-2; See page 8.2.01
1 CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.01 From 2 to 1
TO ORDER
32cSt oil at 40°C
EV56-2B
Voltage 0 12 24 11 22
-
Without coil 12 V DC 24 V DC 110V RAC 220V RAC
Seals N - Buna N V - Viton A
PRESSURE DROP bar
10.3 8.6 6.9 5.2 3.4 1.7
Terminations DIN 43650 See page 8.1.01
11.4 FLOW L/min.
1.2.02
22.7
SOLENOID VALVE EV08-2B
DESCRIPTION Ø42
A solenoid-operated, 2-way, normally closed, piloted poppet-type, screw-in hydraulic cartridge valve, intended to act as a blocking or load-holding device for low flow circuits.
83
OPERATION
S24 30Nm±10%
28
2 1
Ø15.87
When de-energized, the EV08-2B acts as a check valve, allowing flow from 1 to 2, while blocking flow from 2 to 1. When energized, the cartridge's poppet lifts to open the 2 to 1 flow path. In this mode, flow from 1 to 2 is severely restricted. If this path is required, see model EV08-2E, page 1.5.03
RATINGS
3/4-16UNF-2A
Operating Pressure: 250 bar Flow: See Performance Chart Internal Leakage: 0.25 cc/minute max. at 250 bar Temperature: -20 to 90°C with standard Buna seals Coil Duty Rating: Continuous from 85 % to 115 % of nominal voltage Minimum Pull-in Voltage: 85 % of nominal at 250 bar Filtration: Recommend 25 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC08-2; See page 8.2.01
SYMBOL
2
1 CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.01 From 2 to 1
TO ORDER
32cSt oil at 40°C
EV08-2B
Voltage 0 12 24 11 22
-
Without coil 12 V DC 24 V DC 110V RAC 220V RAC
Seals N - Buna N V - Viton A
PRESSURE DROP bar
10.3 8.6 6.9 5.2 3.4 1.7 11.4
Terminations DIN 43650 See page 8.1.01
FLOW L/min.
1.2.03
22.7
SOLENOID VALVE EV10-2B
Ø42
DESCRIPTION A solenoid-operated, 2-way, normally closed, poppet-type, screw-in hydraulic cartridge valve, designed to function as a load holding or blocking valve in applications requiring low internal leakage.
97
OPERATION
S27
31.8
30Nm±10%
When de-energized, the EV10-2B acts as a check valve, allowing flow to from 1 to 2, while blocking flow in the reverse direction. When energized, the poppet lifts to open the 2 to 1 flow path. In this mode, flow from 1 to 2 is severely restricted. If this path is required, see model EV10-2E, page 1.5.04
2 RATINGS
1
Ø15.87 7/8-14UNF-2A
SYMBOL
2
Operating Pressure: 210 bar Flow: See Performance Chart Internal Leakage: 0.25 cc/minute max. at 210 bar Temperature: -20 to 90°C with standard Buna seals Coil Duty Rating: Continuous from 85 % to 115 % of nominal voltage Minimum Pull-in Voltage: 85 % of nominal at 210 bar Filtration: Recommend 25 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC10-2; See page 8.2.04
1 CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.04 1 to 2
TO ORDER
2 to 1
32cSt oil at 40°C
Voltage 0 12 24 11 22
-
Without coil 12 V DC 24 V DC 110V RAC 220V RAC
Seals N - Buna N V - Viton A
PRESSURE DROP bar
EV10-2B 8.6 6.9 5.2 3.4 1.7 11.4
Terminations DIN 43650 See page 8.1.01
22.7 FLOW L/min.
1.2.04
34.1
45.4
56.8
SOLENOID VALVE EV08-2C
DESCRIPTION
Ø42
A solenoid-operated, 2-way, normally open, piloted poppet-type, screw-in hydraulic cartridge valve, designed for low leakage in load-holding applications.
95
OPERATION
S24 30Nm±10%
33
2 1
When de-energized, the EV08-2C allows flow from 2 to 1. Flow from 1 to 2 is always blocking. When energized, the valve's poppet closes on its seat, blocking flow from 2 to 1. In this mode cartridge will also blocking flow from 1 to 2.
RATINGS Ø15.87
Operating Pressure: 250 bar Flow: See Performance Chart Internal Leakage: 0.25 cc/minute max. at 250 bar Temperature: -20 to 90°C with standard Buna seals Coil Duty Rating: Continuous from 85 % to 115 % of nominal voltage Minimum Pull-in Voltage: 85 % of nominal at 250 bar Filtration: Recommend 25 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC08-2A; See page 8.2.02
3/4-16UNF-2A
SYMBOL
2
1 CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.02 From 2 to 1 32cSt oil at 40°C
TO ORDER EV08-2C
Voltage 0 12 24 11 22
-
Without coil 12 V DC 24 V DC 110V RAC 220V RAC
Seals N - Buna N V - Viton A
PRESSURE DROP bar
10.2 8.5 6.8 5.1 3.4 1.7 7.5
Terminations DIN 43650 See page 8.1.01
15.1 FLOW L/min.
1.3.01
22.7
SOLENOID VALVE EV08-2D
DESCRIPTION Ø42
A solenoid-operated, 2-way, normally closed, piloted poppet-type, screw-in hydraulic cartridge valve, intended to act as a blocking or load-holding device for low flow circuits.
88
OPERATION
S24 30Nm±10%
2
33
When de-energized, the EV08-2D blocks flow in both directions. When energized, the cartridge's poppet lifts to open the 2 to 1 flow path. In this mode, flow from 1 to 2 is blocked.
RATINGS
1
Ø15.87
Operating Pressure: 250 bar Flow: See Performance Chart Internal Leakage: 0.25 cc/minute max. at 250 bar Temperature: -20 to 90°C with standard Buna seals Coil Duty Rating: Continuous from 85 % to 115 % of nominal voltage Minimum Pull-in Voltage: 85 % of nominal at 250 bar Filtration: Recommend 25 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC08-2A; See page 8.2.02
3/4-16UNF-2A
SYMBOL
2
1 CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.02 From 2 to 1
TO ORDER
32cSt oil at 40°C
EV08-2D
Voltage 0 12 24 11 22
-
Without coil 12 V DC 24 V DC 110V RAC 220V RAC
Seals N - Buna N V - Viton A
PRESSURE DROP bar
10.3 8.6 6.9 5.2 3.4 1.7 11.4
Terminations DIN 43650 See page 8.1.01
FLOW L/min.
1.4.01
22.7
SOLENOID VALVE EV06-2E
DESCRIPTION A solenoid-operated, 2-way, normally closed, poppet-type, screw-in hydraulic cartridge valve, designed for low leakage blocking and load holding applications.
Ø42
OPERATION 83
When de-energized, the EV06-2E acts as a check valve, allowing flow from 1 to 2, while blocking flow from 2 to 1. When energized, the poppet lifts to open the 2 to 1 flow path. In this mode, bidirectional flow is allowed.
S24
28
2
30Nm±10%
RATINGS
Ø12.7
1
Operating Pressure: 250 bar Flow: See Performance Chart Internal Leakage: 0.25 cc/minute max. at 250 bar Temperature: -20 to 90°C with standard Buna seals Coil Duty Rating: Continuous from 85 % to 115 % of nominal voltage
3/4-16UNF-2A
Minimum Pull-in Voltage: 85 % of nominal at 250 bar Filtration: Recommend 25 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC06-2; See page 8.2.01
SYMBOL
2
1 CAVITY
PERFORMANCE(Cartridge Only)
See page 8.2.01 1 to 2
TO ORDER
2 to 1
32cSt oil at 40°C
EV06-2E
Voltage 0 12 24 11 22
-
Without coil 12 V DC 24 V DC 110V RAC 220V RAC
Seals N - Buna N V - Viton A
PRESSURE DROP bar
10.3 8.6 6.9 5.2 3.4 1.7 11.4
Terminations DIN 43650 See page 8.1.01
FLOW L/min.
1.5.01
22.7
SOLENOID VALVE EV56-2E
DESCRIPTION
Ø32
A solenoid-operated, 2-way, normally closed, piloted poppet-type, screw-in hydraulic cartridge valve, intended to act as a blocking or load-holding device for low flow circuits.
87
OPERATION
S24 30Nm±10%
28
2 Ø12.7
1
When de-energized, the EV56-2E acts as a check valve, allowing flow from 1 to 2, while blocking flow from 2 to 1. When energized, the poppet lifts to open the 2 to 1 flow path. In this mode, bidirectional flow is allowed.
RATINGS
3/4-16UNF-2A
SYMBOL
2
Operating Pressure: 200 bar Flow: See Performance Chart Internal Leakage: 0.25 cc/minute max. at 200 bar Temperature: -20 to 90°C with standard Buna N seals Coil Duty Rating: Continuous from 85 % to 115 % of nominal voltage Minimum Pull-in Voltage: 85 % of nominal at 200 bar Filtration: Recommend 25 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC06-2; See page 8.2.01
1 CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.01 1 to 2
TO ORDER
2 to 1
32cSt oil at 40°C
EV56-2E
Voltage 0 12 24 11 22
-
Without coil 12 V DC 24 V DC 110V RAC 220V RAC
Seals N - Buna N V - Viton A
PRESSURE DROP bar
10.3 8.6 6.9 5.2 3.4 1.7 11.4
Terminations DIN 43650 See page 8.1.01
FLOW L/min.
1.5.02
22.7
SOLENOID VALVE EV08-2E
DESCRIPTION
Ø42
A solenoid-operated, 2-way, normally closed, poppet-type, screw-in hydraulic cartridge valve, designed for low leakage blocking and load holding applications.
OPERATION 83
When de-energized, the EV08-2E acts as a check valve, allowing flow from 1 to 2, while blocking flow from 2 to 1. When energized, the poppet lifts to open the 2 to 1 flow path. In this mode, bidirectional flow is allowed.
S24 30Nm±10%
28
2
RATINGS
1
Ø15.87
Operating Pressure: 250 bar Flow: See Performance Chart Internal Leakage: 0.25 cc/minute max. at 250 bar Temperature: -20 to 90°C with standard Buna seals Coil Duty Rating: Continuous from 85 % to 115 % of nominal voltage
3/4-16UNF-2A
Minimum Pull-in Voltage: 85 % of nominal at 250 bar Filtration: Recommend 25 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC08-2; See page 8.2.01
SYMBOL
2
1 CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.01 1 to 2
TO ORDER
2 to 1
32cSt oil at 40°C
EV08-2E
Voltage 0 12 24 11 22
-
Without coil 12 V DC 24 V DC 110V RAC 220V RAC
Seals N - Buna N V - Viton A
PRESSURE DROP bar
10.3 8.6 6.9 5.2 3.4 1.7 11.4
Terminations DIN 43650 See page 8.1.01
FLOW L/min.
1.5.03
22.7
SOLENOID VALVE EV10-2E
DESCRIPTION
Ø42
A solenoid-operated, 2-way, normally closed, poppet-type, screw-in hydraulic cartridge valve, designed for low leakage blocking and load holding applications.
OPERATION
97
When de-energized, the EV10-2E acts as a check valve, allowing flow to from 1 to 2, while blocking flow from 2 to 1. When energized, the poppet lifts to open the 2 to 1 flow path. In this mode, flow is also allowed from 1 to 2.
S27
31.8
30Nm±10%
RATINGS
2 1
Ø15.87 7/8-14UNF-2A
SYMBOL
2
Operating Pressure: 210 bar Flow: See Performance Chart Internal Leakage: 0.25 cc/minute max. at 210 bar Temperature: -20 to 90°C with standard Buna seals Coil Duty Rating: Continuous from 85 % to 115 % of nominal voltage Minimum Pull-in Voltage: 85 % of nominal at 210 bar Filtration: Recommend 25 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC10-2; See page 8.2.04
1 CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.04
TO ORDER
1 to 2
EV10-2E
0 12 24 11 22
-
Without coil 12 V DC 24 V DC 110V RAC 220V RAC
32cSt oil at 40°C
Seals N - Buna N V - Viton A
PRESSURE DROP bar
Voltage
2 to 1
8.6 6.9 5.2 3.4 1.7
Terminations DIN 43650 See page 8.1.01
11.4
22.7
34.1
FLOW L/min.
1.5.04
45.4
56.8
SOLENOID VALVE EV06-2F
DESCRIPTION Ø42 A solenoid-operated, 2-way, normally open, poppet-type, screw-in hydraulic cartridge valve, designed to function as a load holding or blocking valve in applications requiring low internal leakage at high pressure.
OPERATION 92
When de-energized, the EV06-2F poppet lifts to open flow from 2 to 1. Flow is also open from 1 to 2. When energized, the cartridge acts as a check valve, allowing flow from 1 to 2, while blocking flow from 2 to 1.
S24
28
2
30Nm±10%
RATINGS
Ø12.7
1
Operating Pressure: 250 bar Flow: See Performance Chart Internal Leakage: 0.25 cc/minute max. at 250 bar Temperature: -20 to 90°C with standard Buna seals Coil Duty Rating: Continuous from 85 % to 115 % of nominal voltage
3/4-16UNF-2A
Minimum Pull-in Voltage: 85 % of nominal at 250 bar Filtration: Recommend 5 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC06-2; See page 8.2.01
SYMBOL
2
1 CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.01 From 2 to 1 32cSt oil at 40°C
TO ORDER EV06-2F
Voltage 0 12 24 11 22
-
Without coil 12 V DC 24 V DC 110V RAC 220V RAC
Seals N - Buna N V - Viton A
PRESSURE DROP bar
10.2 8.5 6.8 5.1 3.4 1.7 7.5
Terminations DIN 43650 See page 8.1.01
15.1 FLOW L/min.
1.6.01
22.7
SOLENOID VALVE EV08-2F
DESCRIPTION Ø42
A solenoid-operated, 2-way, normally open, poppet-type, screw-in hydraulic cartridge valve, designed to function as a load holding or blocking valve in applications requiring low internal leakage at high pressure.
OPERATION 92
When de-energized, the EV08-2F poppet lifts to open flow from 2 to 1. Flow is also open from 1 to 2. When energized, the cartridge acts as a check valve, allowing flow from 1 to 2, while blocking flow from 2 to 1.
S24 30Nm±10%
28
2
RATINGS
1
Operating Pressure: 250 bar Flow: See Performance Chart Internal Leakage: 0.25 cc/minute max. at 250 bar Temperature: -20 to 90°C with standard Buna seals Coil Duty Rating: Continuous from 85 % to 115 % of nominal voltage
Ø15.87 3/4-16UNF-2A
Minimum Pull-in Voltage: 85 % of nominal at 250 bar Filtration: Recommend 5 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC08-2; See page 8.2.01
SYMBOL
2
1 CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.01 From 2 to 1 32cSt oil at 40°C
TO ORDER EV08-2F
0 12 24 11 22
-
Without coil 12 V DC 24 V DC 110V RAC 220V RAC
Seals N - Buna N V - Viton A
PRESSURE DROP bar
Voltage
10.2 8.5 6.8 5.1 3.4 1.7 7.5
Terminations DIN 43650 See page 8.1.01
15.1 FLOW L/min.
1.6.02
22.7
SOLENOID VALVE EV10-2F
DESCRIPTION
Ø42
A solenoid-operated, 2-way, poppet-type, normally open, screw-in, hydraulic cartridge valve.
101
OPERATION
S27
When de-energized, the EV10-2F allows bidirectional flow from 2 to 1. When energized, the valve's poppet closes to block flow from 2 to 1. In this mode, the cartridge allows free reverse flow from 1 to 2 after overcoming the solenoid force
31.8
30Nm±10%
2 1
RATINGS
Ø15.87 7/8-14UNF-2A
SYMBOL
2
Operating Pressure: 210 bar Flow: See Performance Chart Internal Leakage: 0.25 cc/minute max. at 210 bar Temperature: -20 to 90°C with standard Buna seals Coil Duty Rating: Continuous from 85 % to 115 % of nominal voltage Minimum Pull-in Voltage: 85 % of nominal at 210 bar Filtration: Recommend 25 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC10-2; See page 8.2.04
1 CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.04 1 to 2
TO ORDER
2 to 1
32cSt oil at 40°C
Voltage 0 12 24 11 22
-
Without coil 12 V DC 24 V DC 110V RAC 220V RAC
Seals N - Buna N V - Viton A
PRESSURE DROP bar
EV10-2F 8.6 6.9 5.2 3.4 1.7 11.4
Terminations DIN 43650 See page 8.1.01
22.7 FLOW L/min.
1.6.03
34.1
45.4
56.8
SOLENOID VALVE EV06-2K
DESCRIPTION
Ø42
A solenoid-operated, 2-way, normally open, direct-acting, spool-type, screw-in hydraulic cartridge valve designed to function as a bidirectional blocking valve in low flow circuits.
9
OPERATION S24
28
2 1
When de-energized, the EV06-2K allows flow in both directions. When energized, the valve's spool shifts to close bidirectionally.
30Nm±10%
Ø12.7
RATINGS
3/4-16UNF-2A
Operating Pressure: 250 bar Flow: 8 L/min max. Internal Leakage: 82 cc/minute max. at 250 bar Temperature: -20 to 90°C with standard Buna seals Coil Duty Rating: Continuous from 85 % to 115 % of nominal voltage Minimum Pull-in Voltage: 85 % of nominal at 250 bar Filtration: Recommend 10 µm nominal Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC06-2; See page 8.2.01
SYMBOL
2
1 CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.01
De-energized 32 cSt oil at 40°C
TO ORDER
8.6
Voltage 0 12 24 11 22
-
Without coil 12 V DC 24 V DC 110V RAC 220V RAC
Seals N - Buna N V - Viton A
PRESSURE DROP bar
EV06-2K
6.9 5.2 3.4 1.7
3.8
Terminations DIN 43650 See page 8.1.01
7.5 FLOW L/min.
1.7.01
11.4
SOLENOID VALVE EV56-2K
DESCRIPTION Ø32
A solenoid-operated, 2-way, normally open, direct-acting, spool-type, screw-in hydraulic cartridge valve designed to function as a bidirectional blocking valve in low flow circuits.
87
OPERATION When de-energized, the EV56-2K allows flow in both directions. When energized, the valve's spool shifts to close bidirectionally.
S24 30Nm±10%
28
2
RATINGS
Ø12.7
1
3/4-16UNF-2A
SYMBOL
Operating Pressure: 200 bar Flow: 8l/min max Internal Leakage: 82 cc/minute max. at 200 bar Temperature: -20 to 90°C with standard Buna N seals Coil Duty Rating: Continuous from 85 % to 115 % of nominal voltage Minimum Pull-in Voltage: 85 % of nominal at 200 bar Filtration: Recommend 10 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC06-2; See page 8.2.01
2
1 CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.01 De-energized 32 cSt oil at 40°C
TO ORDER 8.6
Voltage 0 12 24 11 22
-
Without coil 12 V DC 24 V DC 110V RAC 220V RAC
Seals N - Buna N V - Viton A
PRESSURE DROP bar
EV56-2E
6.9 5.2 3.4 1.7
Terminations DIN 43650 See page 8.1.01
3.8
7.5 FLOW L/min.
1.7.02
11.4
SOLENOID VALVE EV08-2K
DESCRIPTION
Ø42
A solenoid-operated, 2-way, normally open, direct-acting, spool-type, screw-in hydraulic cartridge valve designed to function as a bidirectional blocking valve in low flow circuits.
9
OPERATION When de-energized, the EV08-2K allows flow in both directions. When energized, the valve's spool shifts to close bidirectionally.
S24 30Nm±10%
28
2
RATINGS
1
Ø15.87 3/4-16UNF-2A
SYMBOL
2
Operating Pressure: 250 bar Flow: 8 L/min max. Internal Leakage: 82 cc/minute max. at 250 bar Temperature: -20 to 90°C with standard Buna seals Coil Duty Rating: Continuous from 85 % to 115 % of nominal voltage Minimum Pull-in Voltage: 85 % of nominal at 250 bar Filtration: Recommend 10 µm nominal Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC08-2; See page 8.2.01
1 CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.01
De-energized 32 cSt oil at 40°C
TO ORDER
8.6
Voltage 0 12 24 11 22
-
Without coil 12 V DC 24 V DC 110V RAC 220V RAC
Seals N - Buna N V - Viton A
PRESSURE DROP bar
EV08-2K
6.9 5.2 3.4 1.7
3.8
Terminations DIN 43650 See page 8.1.01
7.5 FLOW L/min.
1.7.03
11.4
SOLENOID VALVE EV10-2K
Ø42
DESCRIPTION A solenoid-operated, 2-way, normally open, direct-acting, spool-type, screw-in hydraulic cartridge valve, designed to function as a bidirectional blocking valve.
97
OPERATION When de-energized, the EV10-2K allows flow in both directions. When energized, the cartridge's spool shifts to close the bidirectional flow path.
S27
31.8
30Nm±10%
2 RATINGS
1
Ø15.87 7/8-14UNF-2A
SYMBOL
2
Operating Pressure: 210 bar Flow: See Performance Chart Internal Leakage: 80 cc/minute max. at 210 bar Temperature: -20 to 90°C with standard Buna seals Coil Duty Rating: Continuous from 85 % to 115 % of nominal voltage Minimum Pull-in Voltage: 85 % of nominal at 210 bar Filtration: Recommend 25 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC10-2; See page 8.2.04
1 CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.04 De-energized
TO ORDER
32cSt oil at 40°C
Voltage 0 12 24 11 22
-
Without coil 12 V DC 24 V DC 110V RAC 220V RAC
Seals N - Buna N V - Viton A
PRESSURE DROP bar
EV10-2K
6.9 5.5 4.1 2.8 1.4 7.5
15.1
FLOW L/min.
Terminations DIN 43650 See page 8.1.01
1.7.04
22.7
SOLENOID VALVE EV06-2L
DESCRIPTION Ø42 A solenoid-operated, 2-way, normally closed, direct-acting, spool-type, screw-in hydraulic cartridge valve, designed to operate as a bidirectional blocking valve in low flow circuits.
9
OPERATION
S24
28
2
30Nm±10%
Ø12.7
1
3/4-16UNF-2A
SYMBOL
When de-energized, the EV06-2L blocks flow in both directions. When energized, the cartridge’s spool shifts to open the bidirectional flow path.
RATINGS Operating Pressure: 250 bar Flow: 10 L/min max. Internal Leakage: 82 cc/minute max. at 250 bar Temperature: -20 to 90°C with standard Buna seals Coil Duty Rating: Continuous from 85 % to 115 % of nominal voltage Minimum Pull-in Voltage: 85 % of nominal at 250 bar Filtration: Recommend 10 µm nominal Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC06-2; See page 8.2.01
2
1 CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.01 Energized
TO ORDER
32 cSt oil at 40°C 8.6
Voltage 0 12 24 11 22
-
Without coil 12 V DC 24 V DC 110V RAC 220V RAC
Seals N - Buna N V - Viton A
PRESSURE DROP bar
EV06-2L
6.9 5.2 3.4 1.7
Terminations DIN 43650 See page 8.1.01
3.8
7.5 FLOW L/min.
1.8.01
11.4
SOLENOID VALVE EV56-2L
DESCRIPTION Ø32
A solenoid-operated, 2-way, normally closed, direct-acting, spool-type, screw-in hydraulic cartridge valve, designed to operate as a bidirectional blocking valve in low flow circuits.
87
OPERATION When de-energized, the EV56-2L blocks flow in both directions. When energized, the cartridge’s spool shifts to open the bidirectional flow path.
S24 30Nm±10%
28
2
RATINGS
Ø12.7
1
3/4-16UNF-2A
SYMBOL
Operating Pressure: 200 bar Flow: 10 L/min max Internal Leakage: 82 cc/minute max. at 200 bar Temperature: -20 to 90°C with standard Buna N seals Coil Duty Rating: Continuous from 85 % to 115 % of nominal voltage Minimum Pull-in Voltage: 85 % of nominal at 200 bar Filtration: Recommend 10 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC06-2; See page 8.2.01
2
1 CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.01
Energized 32 cSt oil at 40°C
TO ORDER
8.6
Voltage 0 12 24 11 22
-
Without coil 12 V DC 24 V DC 110V RAC 220V RAC
Seals N - Buna N V - Viton A
PRESSURE DROP bar
EV56-2L
Terminations DIN 43650 See page 8.1.01
6.9 5.2 3.4 1.7
3.8
7.5 FLOW L/min.
1.8.02
11.4
SOLENOID VALVE EV08-2L
DESCRIPTION
Ø42
A solenoid-operated, 2-way, normally closed, direct-acting, spool-type, screw-in hydraulic cartridge valve, designed to operate as a bidirectional blocking valve in low flow circuits.
OPERATION 9
When de-energized, the EV08-2L blocks flow in both directions. When energized, the cartridge’s spool shifts to open the bidirectional flow path. S24 30Nm±10%
28
2 1
Ø15.87 3/4-16UNF-2A
SYMBOL
RATINGS Operating Pressure: 250 bar Flow: 10 L/min max. Internal Leakage: 82 cc/minute max. at 250 bar Temperature: -20 to 90°C with standard Buna seals Coil Duty Rating: Continuous from 85 % to 115 % of nominal voltage Minimum Pull-in Voltage: 85 % of nominal at 250 bar Filtration: Recommend 10 µm nominal Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC08-2; See page 8.2.01
2
1 CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.01 Energized
TO ORDER
32 cSt oil at 40°C 8.6
Voltage 0 12 24 11 22
-
Without coil 12 V DC 24 V DC 110V RAC 220V RAC
Seals N - Buna N V - Viton A
PRESSURE DROP bar
EV08-2L
6.9 5.2 3.4 1.7
Terminations DIN 43650 See page 8.1.01
3.8
7.5 FLOW L/min.
1.8.03
11.4
SOLENOID VALVE EV10-2L
Ø42
DESCRIPTION A solenoid-operated, 2-way, normally closed, direct-acting, spool-type, screw-in hydraulic cartridge valve, designed to operate as a bidirectional blocking valve.
97
OPERATION When de-energized, the EV10-2L blocks flow in both directions. When energized, the cartridge's spool shifts to open the bidirectional flow path.
S27
31.8
30Nm±10%
2 RATINGS
1
Ø15.87 7/8-14UNF-2A
SYMBOL
2
Operating Pressure: 210 bar Flow: See Performance Chart Internal Leakage: 80 cc/minute max. at 210 bar Temperature: -20 to 90°C with standard Buna seals Coil Duty Rating: Continuous from 85 % to 115 % of nominal voltage Minimum Pull-in Voltage: 85 % of nominal at 210 bar Filtration: Recommend 25 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC10-2; See page 8.2.04
1 CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.04 Energized 32cSt oil at 40°C
TO ORDER 8.3
Voltage 0 12 24 11 22
-
Without coil 12 V DC 24 V DC 110V RAC 220V RAC
Seals N - Buna N V - Viton A
PRESSURE DROP bar
EV10-2L
6.9 5.5 4.1 2.8 1.4 15.1
30.2
FLOW L/min.
Terminations DIN 43650 See page 8.1.01
1.8.04
45.4
60.6
SOLENOID VALVE EV08-3A
Ø42
DESCRIPTION A solenoid-operated, 3-way, direct-acting, spool-type, screw-in hydraulic cartridge valve.
106.5
OPERATION When de-energized, the EV08-3A allows flow from 2 to 1, while blocking flow at 3. When energized, the cartridge's spool shifts to open from 2 to 3, while blocking at 1.
S24 30Nm±10%
43.5
3 2 1
RATINGS
Ø14.3 Ø15.87 3/4-16UNF-2A
SYMBOL
2
3
Operating Pressure: 210 bar Flow: 8 L/min. max. Internal Leakage: 82 cc/minute max. at 210 bar Temperature: -20 to 90°C with standard Buna seals Coil Duty Rating: Continuous from 85 % to 115 % of nominal voltage Minimum Pull-in Voltage: 85 % of nominal at 210 bar Filtration: Recommend 10 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC08-3A; See page 8.2.02
1
CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.02 2 to 1
TO ORDER
32cSt oil at 40°C
EV08-3A
0 12 24 11 22
-
Without coil 12 V DC 24 V DC 110V RAC 220V RAC
8.6
Seals N - Buna N V - Viton A
PRESSURE DROP bar
Voltage
3 to 2
6.9 5.2 3.4 1.7
Terminations DIN 43650 See page 8.1.01 3.8
7.5 FLOW L/min.
1.9.01
11.4
SOLENOID VALVE EV58-3A
Ø32
DESCRIPTION A solenoid-operated, 3-way, direct-acting, spool-type, screw-in hydraulic cartridge valve.
102.5
OPERATION When de-energized, the EV58-3A allows flow from 2 to 1, while blocking flow at 3. When energized, the cartridge's spool shifts to open from 2 to 3, while blocking at 1.
S24 30Nm±10%
43.5
3 2 1
RATINGS
Ø14.3 Ø15.87 3/4-16UNF-2A
SYMBOL
2
3
Operating Pressure: 210 bar Flow: 8 L/min. max. Internal Leakage: 82 cc/minute max. at 210 bar Temperature: -20 to 90°C with standard Buna seals Coil Duty Rating: Continuous from 85 % to 115 % of nominal voltage Minimum Pull-in Voltage: 85 % of nominal at 210 bar Filtration: Recommend 10 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC08-3A; See page 8.2.03
1
CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.03 2 to 1
TO ORDER
32cSt oil at 40°C
EV58-3A
0 12 24 11 22
-
Without coil 12 V DC 24 V DC 110V RAC 220V RAC
8.6
Seals N - Buna N V - Viton A
PRESSURE DROP bar
Voltage
3 to 2
6.9 5.2 3.4 1.7
Terminations DIN 43650 See page 8.1.01 3.8
7.5 FLOW L/min.
1.9.02
11.4
SOLENOID VALVE EV10-3A
Ø42
DESCRIPTION A solenoid-operated, 3-way, direct-acting, spool-type, screw-in hydraulic cartridge valve.
107
OPERATION
46
S27
When de-energized, the EV10-3A allows flow from 2 to 1, while blocking flow at 3. When energized, the cartridge's spool shifts to open from 2 to 3, while blocking at 1.
30Nm±10%
3 2
RATINGS
1
Ø15.87
Ø17.5 7/8-14UNF-2A
SYMBOL
2
3
Operating Pressure: 210 bar Flow: 23L/min. max. Internal Leakage: 110 cc/minute max. at 210 bar Temperature: -20 to 90°C with standard Buna seals Coil Duty Rating: Continuous from 85 % to 115 % of nominal voltage Minimum Pull-in Voltage: 85 % of nominal at 210 bar Filtration: Recommend 10 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC10-3; See page 8.2.04
1
CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.04 2 to 3
TO ORDER
32cSt oil at 40°C
EV10-3A
0 12 24 11 22
-
Without coil 12 V DC 24 V DC 110V RAC 220V RAC
10.3
Seals N - Buna N V - Viton A
PRESSURE DROP bar
Voltage
2 to 1
8.3 6.2 4.1 2.1
Terminations DIN 43650 See page 8.1.01 7.5
15.1 FLOW L/min.
1.9.03
22.7
SOLENOID VALVE EV08-3C
Ø42
DESCRIPTION A solenoid-operated, 3-way, direct-acting, spool-type, screw-in hydraulic cartridge valve.
103.8
OPERATION When de-energized, the EV08-3C allows flow from 2 to 1, while blocking flow at 3. When energized, the cartridge's spool shifts to open from 1 to 3, while blocking at 2.
S24 30Nm±10%
40.8
3 2 1
RATINGS
Ø14.3 Ø15.87 3/4-16UNF-2A
SYMBOL
2
3
Operating Pressure: 210 bar Flow: 8 L/min. max. Internal Leakage: 82 cc/minute max. at 210 bar Temperature: -20 to 90°C with standard Buna seals Coil Duty Rating: Continuous from 85 % to 115 % of nominal voltage Minimum Pull-in Voltage: 85 % of nominal at 210 bar Filtration: Recommend 10 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC08-3; See page 8.2.03
1
CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.03 2 to 1
TO ORDER
32cSt oil at 40°C
EV08-3C
0 12 24 11 22
-
Without coil 12 V DC 24 V DC 110V RAC 220V RAC
8.6
Seals N - Buna N V - Viton A
PRESSURE DROP bar
Voltage
3 to 1
6.9 5.2 3.4 1.7
Terminations DIN 43650 See page 8.1.01 3.8
7.5 FLOW L/min.
1.10.01
11.4
SOLENOID VALVE EV58-3C
DESCRIPTION
Ø32
A solenoid-operated, 3-way, direct-acting, spool-type, screw-in hydraulic cartridge valve.
99.8
OPERATION When de-energized, the EV58-3C allows flow from 2 to 1, while blocking flow at 3. When energized, the cartridge's spool shifts to open from 1 to 3, while blocking at 2.
S24 30Nm±10%
40.8
3 2 1
RATINGS
Ø14.3 Ø15.87 3/4-16UNF-2A
SYMBOL
2
3
Operating Pressure: 210 bar Flow: 8 L/min. max. Internal Leakage: 82 cc/minute max. at 210 bar Temperature: -20 to 90°C with standard Buna seals Coil Duty Rating: Continuous from 85 % to 115 % of nominal voltage Minimum Pull-in Voltage: 85 % of nominal at 210 bar Filtration: Recommend 10 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC08-3; See page 8.2.03
1
CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.03 2 to 1
TO ORDER
32cSt oil at 40°C
EV58-3C
0 12 24 11 22
-
Without coil 12 V DC 24 V DC 110V RAC 220V RAC
8.6
Seals N - Buna N V - Viton A
PRESSURE DROP bar
Voltage
3 to 1
6.9 5.2 3.4 1.7
Terminations DIN 43650 See page 8.1.01 3.8
7.5 FLOW L/min.
1.10.02
11.4
SOLENOID VALVE EV10-3C
Ø42
DESCRIPTION A solenoid-operated, 3-way, direct-acting, spool-type, screw-in hydraulic cartridge valve.
OPERATION 107
When de-energized, the EV10-3C allows flow from 2 to 1, while blocking flow at 3. When energized, the cartridge's spool shifts to open from 1 to 3, while blocking at 2.
46
S27 30Nm±10%
3 2 1
Ø15.87
Ø17.5 7/8-14UNF-2A
SYMBOL
RATINGS Operating Pressure: 210 bar Flow: 23L/min. max. Internal Leakage: 80 cc/minute max. at 210 bar Temperature: -20 to 90°C with standard Buna seals Coil Duty Rating: Continuous from 85 % to 115 % of nominal voltage Minimum Pull-in Voltage: 85 % of nominal at 210 bar Filtration: Recommend 10 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC10-3; See page 8.2.04
2 PERFORMANCE (Cartridge Only) 2 to 1 (d) 1 to 3 (e) 32cSt oil at 40°C
1 PRESSURE DROP bar
3 CAVITY
See page 8.2.04
TO ORDER
8.6 6.9 5.2 3.4 1.7
EV10-3C
0 12 24 11 22
-
Without coil 12 V DC 24 V DC 110V RAC 220V RAC
Seals N - Buna N V - Viton A
Terminations DIN 43650 See page 8.1.01
OPERATING PRESSURE bar
Voltage
7.5
15.1 FLOW L/min.
22.7
Performance Range inlet at 1 inlet at 3 or 2 280 210 140 70 3.8
1.10.03
7.5 11.4 15.1 18.9 OPERATING FLOW L/min.
22.7
26.5
SOLENOID VALVE EV08-3D
Ø42
DESCRIPTION A solenoid-operated, 3-way, direct-acting, spool-type, screw-in hydraulic cartridge valve.
103.8
OPERATION When de-energized, the EV08-3D allows flow from 3 to 1, while blocking flow at 2. When energized, the cartridge's spool shifts to open from 2 to 3, while blocking at 1.
S24 30Nm±10%
40.8
3 2 1
RATINGS
Ø14.3 Ø15.87 3/4-16UNF-2A
SYMBOL
2
3
Operating Pressure: 210 bar Flow: 8 L/min. max. Internal Leakage: 82 cc/minute max. at 210 bar Temperature: -20 to 90°C with standard Buna seals Coil Duty Rating: Continuous from 85 % to 115 % of nominal voltage Minimum Pull-in Voltage: 85 % of nominal at 210 bar Filtration: Recommend 10 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC08-3; See page 8.2.03
1
CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.03 3 to 1
TO ORDER
32cSt oil at 40°C
EV08-3D
0 12 24 11 22
-
Without coil 12 V DC 24 V DC 110V RAC 220V RAC
Seals N - Buna N V - Viton A
PRESSURE DROP bar
Voltage
8.6 6.9 5.2 3.4 1.7
Terminations DIN 43650 See page 8.1.01 3.8
7.5 FLOW L/min.
1.11.01
11.4
SOLENOID VALVE EV58-3D
DESCRIPTION
Ø32
A solenoid-operated, 3-way, direct-acting, spool-type, screw-in hydraulic cartridge valve.
99.8
OPERATION When de-energized, the EV58-3D allows flow from 3 to 1, while blocking flow at 2. When energized, the cartridge's spool shifts to open from 2 to 3, while blocking at 1.
S24 30Nm±10%
40.8
3 2 1
RATINGS
Ø14.3 Ø15.87 3/4-16UNF-2A
SYMBOL
2
3
Operating Pressure: 210 bar Flow: 8 L/min. max. Internal Leakage: 82 cc/minute max. at 210 bar Temperature: -20 to 90°C with standard Buna seals Coil Duty Rating: Continuous from 85 % to 115 % of nominal voltage Minimum Pull-in Voltage: 85 % of nominal at 210 bar Filtration: Recommend 10 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC08-3; See page 8.2.03
1
CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.03 3 to 1
TO ORDER
32cSt oil at 40°C
EV58-3D
0 12 24 11 22
-
Without coil 12 V DC 24 V DC 110V RAC 220V RAC
Seals N - Buna N V - Viton A
PRESSURE DROP bar
Voltage
8.6 6.9 5.2 3.4 1.7
Terminations DIN 43650 See page 8.1.01 3.8
7.5 FLOW L/min.
1.11.02
11.4
SOLENOID VALVE EV10-3D
Ø42
DESCRIPTION A solenoid-operated, 3-way, direct-acting, spool-type, screw-in hydraulic cartridge valve.
OPERATION 107
When de-energized, the EV10-3D allows flow from 3 to 1, while blocking flow at 2. When energized, the cartridge's spool shifts to open from 1 to 2, while blocking at 3.
46
S27 30Nm±10%
3 2 1
Ø15.87
Ø17.5 7/8-14UNF-2A
SYMBOL
RATINGS Operating Pressure: 210 bar Flow: 23L/min. max. Internal Leakage: 80 cc/minute max. at 210 bar Temperature: -20 to 90°C with standard Buna seals Coil Duty Rating: Continuous from 85 % to 115 % of nominal voltage Minimum Pull-in Voltage: 85 % of nominal at 210 bar Filtration: Recommend 25 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC10-3; See page 8.2.04
2
3
1
CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.04 3 to 1 (d)
TO ORDER
0 12 24 11 22
-
Without coil 12 V DC 24 V DC 110V RAC 220V RAC
Seals N - Buna N V - Viton A
PRESSURE DROP bar
EV10-3D
Voltage
1 to 2 (e)
32cSt oil at 40°C 8.6 6.9 5.2 3.4 1.7 3.8
Terminations DIN 43650 See page 8.1.01
1.11.03
7.5 11.4 FLOW L/min.
15.1
18.9
SOLENOID VALVE EV08-4A
Ø42
DESCRIPTION A solenoid-operated, 4-way, 2-position, direct-acting spool-type, screw-in hydraulic cartridge valve.
118.5
OPERATION S24
When de-energized, the EV08-4A flow paths are 3 to 2, and 4 to 1. When energized, the valve's spool shifts to open 3 to 4, and 2 to 1. All ports are open at cross-over.
30Nm±10%
55.5
4 3
RATINGS
2
Operating Pressure: 210 bar Flow: 8 L/min max Internal Leakage: 82 cc/minute max. at 210 bar Temperature: -20 to 90°C with standard Buna seals Coil Duty Rating: Continuous from 85 % to 115 % of nominal voltage
Ø12.7
1
Ø14.3 Ø15.87 3/4-16UNF-2A
Minimum Pull-in Voltage: 85 % of nominal at 210 bar Filtration: Recommend 10 µm nominal Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: VC08-4; See page 8.2.03
SYMBOL
2
4
3
1
CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.03 3 to 4
TO ORDER
32cSt oil at 40°C
0 12 24 11 22
-
Without coil 12 V DC 24 V DC 110V RAC 220V RAC
Seals N - Buna N V - Viton A
PRESSURE DROP bar
10
EV08-4A
Voltage
; 2 to 1 --
8 6 4 2
Terminations DIN 43650 See page 8.1.01
2
4 FLOW L/min.
1.12.01
6
8
SOLENOID VALVE EV58-4A
Ø32
DESCRIPTION A solenoid-operated, 4-way, 2-position, direct-acting spool-type, screw-in hydraulic cartridge valve.
OPERATION 115.5
S24
When de-energized, the EV58-4A flow paths are 3 to 2, and 4 to 1. When energized, the valve's spool shifts to open 3 to 4, and 2 to 1. All ports are open at cross-over.
30Nm±10%
55.5
4 3
RATINGS
2
Operating Pressure: 210 bar Flow: 8 L/min max Internal Leakage: 82 cc/minute max. at 210 bar Temperature: -20 to 90°C with standard Buna seals Coil Duty Rating: Continuous from 85 % to 115 % of nominal voltage
Ø12.7
1
Ø14.3 Ø15.87 3/4-16UNF-2A
Minimum Pull-in Voltage: 85 % of nominal at 210 bar Filtration: Recommend 10 µm nominal Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: VC08-4; See page 8.2.03
SYMBOL
2
4
3
1
CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.03 3 to 4
TO ORDER
32cSt oil at 40°C
0 12 24 11 22
-
Without coil 12 V DC 24 V DC 110V RAC 220V RAC
Seals N - Buna N V - Viton A
PRESSURE DROP bar
10
EV58-4A
Voltage
; 2 to 1 --
8 6 4 2
Terminations DIN 43650 See page 8.1.01
2
4 FLOW L/min.
1.12.02
6
8
SOLENOID VALVE EV10-4A
Ø42
DESCRIPTION A solenoid-operated, 4-way, 2-position, direct-acting, spool-type, screw-in hydraulic cartridge valve.
119
S27 30Nm±10%
62
4
OPERATION When de-energized, the EV10-4A allows flow from 3 to 2, as well as from 4 to 1. When energized, the cartridge's spool shifts to open 3 to 4, and 2 to 1.
3 2
RATINGS
1
Operating Pressure: 210 bar Flow: 23L/min. max. Internal Leakage: 60 cc/minute max. at 210 bar Temperature: -20 to 90°C with standard Buna seals Coil Duty Rating: Continuous from 85 % to 115 % of nominal voltage Minimum Pull-in Voltage: 85 % of nominal at 210 bar Filtration: Recommend 25 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC10-4; See page 8.2.05
Ø15.87 Ø17.5
Ø19.05 7/8-14UNF-2A
SYMBOL
2
4
3
1
CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.05
4 to 1
32cSt oil at 40°C
TO ORDER 8.6
0 12 24 11 22
-
Without coil 12 V DC 24 V DC 110V RAC 220V RAC
Seals N - Buna N V - Viton A
PRESSURE DROP bar
EV10-4A
Voltage
3 to 2
6.9 5.2 3.4 1.7
7.5
Terminations DIN 43650 See page 8.1.01
15.1 FLOW L/min.
1.12.03
22.7
RELIEF VALVE RV06-2A
DESCRIPTION
S3
A screw-in, cartridge-style, direct-acting, poppet-type, hydraulic relief valve intended
S17
for lower flow circuits requiring low internal leakage.
71 max.
OPERATION S24
28
30Nm±10%
2
The RV06-2A blocks flow from 1 to 2 until sufficient pressure is present at 1 to force the spring-opposed poppet from its seat.
RATINGS Operating Pressure: 250 bar
1
Flow: The Performance Chart illustrates flow handling capacity at max. setting for
12.7 3/4-16UNF-2A
each spring range option. Pressure rise will vary with spring (range) and with setting within range due to flow forces. Internal Leakage: 0.25 cc/minute at 200 bar max. to 75
% of nominal setting
Standard Spring Range: 10 to 80 bar 40 to 160 bar 80 to 250 bar
SYMBOL
Temperature: -20 to 90°C with standard Buna seals Filtration: Recommend 25 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt
1
Installation: No restrictions Cavity: CC06-2; See page 8.2.01
2 CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.01 Flow Characteristic
TO ORDER
32cSt oil at 40°C
RV06-2A
Seals 8 - 10...80bar
N - Buna N
16 - 40...160bar
V - Viton A
25 - 80...250bar
PRESSURE DROP bar
250 200 150 100 50
5
10 FLOW L/min.
2.1.01
15
20
RELIEF VALVE RV08-2A
2.1.02
CHECK VALVE CV08-2A
Ø24
S6 30Nm±10%
DESCRIPTION A screw-in, cartridge-style, hydraulic check valve for use as a blocking or load-holding device.
OPERATION
28
45
3/4-16UNF-2A
2
The CV08-2A allows flow age from 2 to 1, while normally blocking oil flow in the opposite direction. The cartridge has a fully guided poppet which is spring-biased closed until sufficient pressure is applied at 2 to open to 1.
RATINGS
1 Ø15.87
Operating Pressure: 250 bar Flow: See Performance Chart Internal Leakage: 0.25 cc/minute max. at 250 bar Standard Bias Spring: 1.2 bar Temperature: -20 to 90°C Filtration: Recommend 25 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC08-2; See page 8.2.01
SYMBOL
2
1 CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.01
TO ORDER
1 to 2 32 cSt oil at 40°C
CV08-2A 6.9 PRESSURE DROP bar
Seals N - Buna N V - Viton A
5.2 3.4 1.7 7.5
15.1 FLOW L/min.
3.1.01
22.7
CHECK VALVE CV08-2B
DESCRIPTION S24
A screw-in, cartridge-style, hydraulic check valve for use as a blocking or load-holding device.
30Nm±10%
28
36
OPERATION
2
1 Ø15.87 3/4-16UNF-2A
SYMBOL
1
The CV08-2B allows flow age from 1 to 2, while normally blocking oil flow in the opposite direction. The cartridge has a fully guided poppet which is spring-biased closed until sufficient pressure is applied at 1 to open to 2.
RATINGS Operating Pressure: 250 bar Flow: See Performance Chart Internal Leakage: 0.25 cc/minute max. at 250 bar Standard Bias Spring: 1.2 bar Temperature: -20 to 90°C Filtration: Recommend 25 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC08-2; See page 8.2.01
2 CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.01
TO ORDER
1 to 2 32 cSt oil at 40°C
CV08-2B
N - Buna N V - Viton A
PRESSURE DROP bar
6.9 Seals
5.2 3.4 1.7 7.5
15.1 FLOW L/min.
3.2.01
22.7
30.2
CHECK VALVE CV10-2B
S27 30Nm±10%
DESCRIPTION A screw-in, cartridge-style, hydraulic check valve for use as a blocking or load-holding device.
31.8
4
OPERATION
2 1
7/8-14UNF-2A
The CV10-2B allows flow age from 1 to 2, while normally blocking oil flow in the opposite direction. The cartridge has a fully guided poppet which is spring-biased closed until sufficient pressure is applied at 1 to open to 2.
Ø15.87
RATINGS
SYMBOL
1
Operating Pressure: 250 bar Flow: See Performance Chart Internal Leakage: 0.25 cc/minute max. at 250 bar Standard Bias Spring: 2.1 bar Temperature: -20 to 90°C Filtration: Recommend 25 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC10-2; See page 8.2.04
2 CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.04 1 to 2 32 cSt oil at 40°C
TO ORDER 8.6
CV10-2B
6.9 PRESSURE DROP bar
Seals N - Buna N V - Viton A
5.2 3.4 1.7 18.9
37.9 FLOW L/min.
3.2.02
56.8
75.8
CHECK PILOT-TO-OPEN V08-3A
S24 30Nm±10%
DESCRIPTION A screw-in, cartridge-style, pilot-operated, hydraulic check valve for use in blocking or load-holding circuits.
53.5
OPERATION 41.5
3 2
The V08-3A allows flow from 2 to 3, while normally blocking flow from 3 to 2. Flow will be allowed from 3 to 2 when sufficient pressure is applied at 1. The cartridge has a 3:1 pilot ratio, meaning that at least one-third of the load pressure held at 3 is required at 1 to open the valve. The check is spring-biased to assure holding in static or no-load conditions. A sealed pilot piston option is available.
1 ø14.3
RATINGS
ø15.87
Operating Pressure: 250 bar Flow: See Performance Chart Internal Leakage: 1 to 2: 0.25 cc/minute max. at 250 bar 2 to 1 (without sealed piston): 115 cc/minute max. at 250 bar Pilot Ratio: 3:1 Check Spring Bias: 2 bar Temperature: -20 to 90°C with standard Buna seals Filtration: Recommend 25 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to
3/4-16UNF-2A
SYMBOL
3
420 cSt Installation: No restrictions Cavity: CC08-3; See page 8.2.02
1
2 CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.02
3 to
2
2 to
3
32cSt oil at 40°C
TO ORDER 8.6
Seals N - Buna N V - Viton A
PRESSURE DROP bar
V08-3A
6.9 5.2 3.4 1.7
7.5
15.4 FLOW L/min.
3.3.01
22.7
30
CHECK PILOT-TO-OPEN V08-3B
S24
DESCRIPTION
30Nm±10%
A screw-in, cartridge-style, pilot-operated, hydraulic check valve for use in blocking or load-holding circuits.
3 41.5
49.7
OPERATION The V08-3B allows flow from 2 to 1, while normally blocking flow from 1 to 2. Flow will be allowed from 1 to 2 when sufficient pressure is applied at 3. The cartridge has a 3:1 pilot ratio, meaning that at least one-third of the load pressure held at 1 is required at 3 to open the valve.
2 1
RATINGS
Ø14.3
Operating Pressure: 210 bar Flow: See Performance Chart Internal Leakage: 1 to 2: 0.25 cc/minute max. at 210 bar Pilot Ratio: 3:1 Check Spring Bias: 4.8 bar Temperature: -20 to 90°C with standard Buna seals Filtration: Recommend 25 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to
Ø15.87 3/4-16UNF-2A
SYMBOL
420 cSt Installation: No restrictions Cavity: CC08-3; See page 8.2.02
1
3
2 CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.02 free flow;
TO ORDER
piloted open
32cSt oil at 40°C
V08-3B
8.6
N - Buna N V - Viton A
6.9 PRESSURE DROP bar
Seals
5.2 3.4 1.7
7.5
15.4 FLOW L/min.
3.4.01
22.7
30
LOAD SHUTTLE LSV10-3A
DESCRIPTION
S27
60
30Nm±10%
OPERATION The LSV10-3A will allow flow from the higher pressure 1 or 2 port to the 2 port. The valve is commonly used to direct oil from the pressure side of a bidirectional hydraulic motor to a pressure-released hydraulic brake.
3
45.8
A load-shuttling, screw-in, cartridge-style hydraulic check valve, for use in blocking circuits where a priority of flow/direction is given to a higher pressure circuit over a lower one.
2 1
Ø15.87
Ø17.5 7/8-14UNF-2A
SYMBOL
2 1
3
CAVITY
RATINGS Operating Pressure: 210 bar Flow: See Performance Chart Internal Leakage: 0.25 cc/minute max. at 210 bar Temperature: -20 to 90°C with standard Buna seals Filtration: Recommend 25 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC10-3; See page 8.2.04
PERFORMANCE (Cartridge Only)
See page 8.2.04 1 or 3 to 2 32 cSt oil at 40°C
TO ORDER LSV10-3A
Seals N - Buna N V - Viton A
PRESSURE DROP bar
17.2 13.8 10.3 6.9 3.4
7.5
15.1 FLOW L/min.
3.5.01
22.7
30.2
PILOTED 2-WAY SPOOL, EXTERNAL VENT HV10-3A
V
DESCRIPTION A screw-in, cartridge-style, pilot-operated, spool-type, normally open hydraulic directional valve for two-way circuits requiring remote pilot actuation. S27
72.5
30Nm±10%
In neutral (unpiloted), the HV10-3A allows flow from 3 to 2 bidirectionally. V is a spring chamber vent-to-atmosphere, which is internally O-ring sealed from the cartridge flow paths. On remote pilot signal at 1, the valve shifts to block 3 to 2 bidirectionally.
45.8
3 2 1
OPERATION
Ø15.87
Ø17.5 7/8-14UNF-2A
SYMBOL
3 1
V 2 CAVITY
RATINGS Operating Pressure: 240 bar Flow: See Performance Chart Internal Leakage: 82 cc/minute max. at 210 bar Pilot Pressure Required: To Full Spool Shift: for 4.1 bar spring: 4.7 bar for 7.6 bar spring: 8.6 bar Temperature: -20 to 90°C with standard Buna seals Filtration: Recommend 25 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC10-3; See page 8.2.04
PERFORMANCE (Cartridge Only)
See page 8.2.04 3 to 2
TO ORDER
32 cSt oil at 40°C
Seals N - Buna N V - Viton A
PRESSURE DROP bar
HV10-3A
6.9 5.2 3.4 1.7
7.5
15.1 FLOW L/min.
3.6.01
22.7
30.2
38
PLOTED LOGIC VALVE PLV10-SA
3.7.01
PRESSURE SEQUENCE VALVE PSV10-3A
4.1.01
PRESSURE SEQUENCE VALVE PSV10-3D
4.1.02
PRESSURE SEQUENCE VALVE PSV10-3D
4.1.03
NEEDLE VILVE NV06-2A
5.1.01
FLOW CONTROL VALVE FC08-2A
S4
DESCRIPTION A screw-in, cartridge-style, variable orifice, hydraulic flow control valve with reverse flow check.
(78)
OPERATION S24
The FC08-2A increases its orifice value from fully closed to fully open with counterclockwise adjustment rotation.
28
30Nm±10%
2 RATINGS
1 Ø15.87 3/4-16UNF-2A
SYMBOL
2
Operating Pressure: 240 bar Flow: 45 lpm nominal at 10 bar at full open Internal Leakage: 0.5 cc/minute max. at shut-off Temperature: -20 to 90°C Filtration: Recommend 25 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC08-2; See page 8.2.01
1 CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.01 Full Open
TO ORDER
Rev. Flow
32 cSt oil at 40°C 6.9
Seals N - Buna N V - Viton A
PRESSURE DROP bar
FC08-2A
5.2 3.4 1.7
7.5
11.4 FLOW L/min.
5.1.02
15.1
22.7
MANUAL SPRING RETURN VALVE MV08-2B
DESCRIPTION
Ø36
A manual, 2-way, pull-to-open, screw-in hydraulic directional valve.
75
OPERATION S24 30Nm±10% 28
2
The MP08-2B blocks flow from 2 to 1 until an operator pulls the shaft outward. Note: Pressure at port 1 will directly act on the spool and spring. Port 1 is intended to be a tank port only. The bias spring allows for up to 12.4 bar back-pressure at 1 before the valve will open.
1 Ø15.87 3/4-16UNF-2A
SYMBOL
2
RATINGS Operating Pressure: Port 2: 250 bar Port 1: 14 bar max. Flow: See Performance Chart Internal Leakage 2 to 1: 0.25 cc/minute max. at 250 bar Mechanical Pull Effort Required at Rated Pressure: 4.5 kg. initial; 7kg full shift Temperature: -40 to 120°C Filtration: Recommend 25 µm nominal or better Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt Installation: No restrictions Cavity: CC08-2; See page 8.2.01
1 CAVITY
PERFORMANCE (Cartridge Only)
See page 8.2.01
TO ORDER
2 to 1
MV08-2B
32cSt oil at 40°C
N - Buna N V - Viton A
PRESSURE DROP bar
Seals
6.9 5.2 3.4 1.7
7.5
15.1
22.7
30
FLOW L/min.
6.1.01
38
45
PRESSURE REDUCING VALVE PRV10-3A
7.1.01
SOLENOIDS FOR CARTRIDGE VALVES
EMA 100 46
A solenoid for hidraulic valves
4
30
50
DESCRIPTION
SOLENOID SPECIFICATIONS Push or pull as required Max. static pressure 400 bar Splash and dust-proof to IP65 DIN 40050 Power consumtion: EMA 100 - 18 or 20 W EMA 50 - 12, 14 or 19W Duty cycle ED 100%
ø16
Ø42
28
Hirschmann DIN43650
Warning: Normally closed valves (except for double locking valve) operate with DC and for AC coils. Normally open valves and double locking valves operate with DC coils only should a normally open solenoid valve be fitted
EMA 50
in a circuit fed by AC power a rectifier and a RAC coil
40
39
30
50
must be used.
Ø32
Ø13
28
Hirschmann DIN43650
VOLTAGE
Code
Solenoid
0
Without coil
12
12V DC
24
24V DC
11
110V RAC
22
220V RAC
8.1.01
CARTRIDGE CAVITIES
8.2.01
CARTRIDGE CAVITIES
8.2.02
CARTRIDGE CAVITIES
8.2.03
CARTRIDGE CAVITIES
8.2.04
CARTRIDGE CAVITIES
8.2.05
Related Documents 3h463d
Caproni Hydraulic Cartridge Valves-en 3a4m1k
December 2019 39
Hydraulic Cartridge System_parker_hy15-3502-us 4wo36
November 2019 58
Parker Hydraulic Cartridge Systems Selection Guide 4041s
November 2022 0
Hydraulic 215q1v
April 2020 47
Hydraulic 215q1v
April 2022 0
The 223 Remington Cartridge 4k1k5
November 2019 84More Documents from "Georgi Mirchev" 284e5a
Caproni Hydraulic Cartridge Valves-en 3a4m1k
December 2019 39
Olivia Steer Retete Idei 3s5ac
October 2019 191
4p345f
November 2019 54
Supereyes B008 Guide 6x4vo
December 2019 51
Ficha Tecnica Peugeot 308 34213g
June 2022 0