Catia V5r17 Dmu Kinematic Trace 3971o

BND TechSource Creating Trace elements using CATIA DMU Kinematics

Website = http://bndtechsource.ucoz.com

Prepared by: Bill Harbin –Technical Director 12-Sep-09

BND TechSource

The following licenses are required to create Trace elements:

Digital Mockup Kinematics Mechanical Part Design

Prepared by: Bill Harbin –Technical Director 12-Sep-09

BND TechSource

Step 1: Create a Kinematic Product.

Prepared by: Bill Harbin –Technical Director 12-Sep-09

BND TechSource

Step 2: Create a Law Sketch.

The Law curve represents angular or distance moved over a time period.

Make the base line a Construction element. Output the base line.

The base line represents time.

Prepared by: Bill Harbin –Technical Director 12-Sep-09

BND TechSource

Step 3: Attach the Law to the Driving Command.

c) Select the Law Sketch

a) Double pick the Driving Command.

d) Pick OK b) Pick Link

Prepared by: Bill Harbin –Technical Director 12-Sep-09

BND TechSource

Step 4: Run a Simulation with Laws. Select the Simulation with Laws icon.

Prepared by: Bill Harbin –Technical Director 12-Sep-09

BND TechSource

Step 5: Create a Simulation using Laws.

a) Select the Simulation icon. c) Pick Automatic insert. b) Pick Use Laws

e) Pick OK to save.

d) Run the Simulation

Prepared by: Bill Harbin –Technical Director 12-Sep-09

BND TechSource

Step 6: Create Trace elements.

a) Select the Trace icon. b) Select the element(s) to be Traced c) If you have created a part to store the Trace elements, select it as Reference product. Else CATIA will create a new Part for you.

d) Pick OK to save.

Prepared by: Bill Harbin –Technical Director 12-Sep-09

BND TechSource

Resulting Trace elements.

Prepared by: Bill Harbin –Technical Director 12-Sep-09