Ccna 1 Exam Networking Answers_ Ccna Discovery 2 - Final Exam Answers Versio 1g5g2q

CCNA 1 Exam Networking Answers: CCNA Discovery 2 - FINAL Exam Answers Version 4.0

CCNA 1 Exam Networking Answers Ads by Google   CCNA Wireless   CCNA Exam   Cisco CCNA   CCNA Basics

CCNA Exploration 4    [Show]   [Hidden] CCNA Discovery 4    [Show]   [Hidden] But if you find the same answers for all the Module anywhere in the internet. And if you have an Answers are correct 100% or if you find an answer, What is wrong in this blog. please send me. (Post in blog or Send Email ) Because,I will update the blog…

Search

Tuesday, December 16, 2008

CCNA Discovery 2 - FINAL Exam Answers Version 4.0 Center Parcs Vossemeren www.centerparcs.de/DeVossemeren Aqua Mundo & Piratenwelt. Neu renovierte VIP Ferienhä! Bent u CRM specialist ? www.netcare.nl Bekijk onze aanvragen en schrijf u gratis in op ons portaal Exam Software www.iSpringSolutions.com Create Rich Media Exams in PowerPoint. Learn More... Cisco Switches For Sale www.MemoryDealers.com/Switches Find New & Refurb Cisco Switches Free Shipping & Tech ! 1 . A company is developing an Internet store for its website. Which protocol should be used to transfer credit card information from customers to the company web server? • FTPS • HTTP • HTTPS • WEP2

http://ccna-answers.blogspot.be/2008/12/ccna-discovery-2-final-exam-answers_16.html[02.06.2012 00:40:08]


• TFTP 2.

Refer to the exhibit. A new branch office has been added to the corporate network and a new router is to be installed to allow branch office s to access the database server at headquarters. How should the serial 0/0/0 interface of the new branch office router be configured to connect to the headquarters router? • branch_23(config-if)# ip address 192.168.5.19 255.255.255.240    branch_23(config-if)# no shutdown • branch_23(config-if)# encapsulation hdlc    branch_23(config-if)# ip address 192.168.5.25 255.255.255.240    branch_23(config-if)# no shutdown • branch_23(config-if)# encapsulation ppp    branch_23(config-if)# no shutdown • branch_23(config-if)# encapsulation ppp    branch_23(config-if)# ip address 192.168.5.33 255.255.255.240 • branch_23(config-if)# encapsulation ppp    branch_23(config-if)# ip address 192.168.5.21 255.255.255.240    branch_23(config-if)# no shutdown 3. Which two commands ensure that any that permits access to the privileged EXEC mode is not shown in plain text when the configuration files are displayed? (Choose two.) • Router(config)# enable secret cisco • Router(config)# enable cisco • Router(config)# encryption- all • Router(config)# enable encrypted • Router(config)# enable encryption • Router(config)# service -encryption 4. A new network is to be configured on a router. Which of the following tasks must be completed to configure this interface and implement dynamic IP routing for the new network? (Choose three.) • Select the routing protocol to be configured. • Assign an IP address and subnet mask to the interface • Update the ip host configuration information with the device name and new interface IP address. • Configure the routing protocol with the new network IP address. • Configure the routing protocol with the new interface IP address and subnet mask. • Configure the routing protocol in use on all other enterprise routers with the new network information. 5. How does T ensure the reliable transfer of data? • if data segments are not received from the source, the destination requests that the segments be resent. • If an acknowledgment of the transmitted segments is not received from the destination in a predetermined amount of the time, the source resends the data. • T uses the SYN-ACK portion of the three-way handshake to ensure that all data has been received. • The T Protocol Interpreter process verifies the transmitted data at source and destination. 6. A network is asked to design a system to allow simultaneous access to



the Internet for 250 s. The ISP for this network can only supply five public IPs. What can be used to accomplish this task? • routable translation • dynamic translation • static translation • port address translation 7. What is the most commonly used exterior routing protocol? • BGP • RIP • OSPF • EIGRP 8.

Refer to the exhibit. The network needs to configure the router with a name. Which command will the use to configure the router name? • Router# ip hostname Boise • Router# enable hostname Boise • Router(config-line)# name Boise • Router(config)# hostname Boise • Router(config)# ip hostname Boise 9. Why are port numbers included in the T header of a segment? • to indicate the correct router interface that should be used to forward a segment • to identify which switch ports should receive or forward the segment • to determine which Layer 3 protocol should be used to encapsulate the data • to enable a receiving host to forward the data to the appropriate application • to allow the receiving host to assemble the packet in the proper order 10. What is the purpose of the routing process? • to encapsulate data that is used to communicate across a network • to select the paths that are used to direct traffic to destination networks • to convert a URL name into an IP address • to provide secure Internet file transfer • to forward traffic on the basis of MAC addresses 11. Which two statements are true about the use of the debug ip rip command on a Cisco router? (Choose two.) • The debug ip rip command displays RIP routing activity in real time. • The debug ip rip command can be issued at the EXEC configuration mode. • The debug ip rip command displays a combination of the information that is displayed by the show ip route and show ip protocols commands. • Because of router processor usage, the debug ip rip command should be used only when necessary. • The debug ip rip command should be used instead of the show ip route command whenever possible. 12. What minimum configurations must be set on a host to allow a request to be sent to http://www.cisco.com/? (Choose four.) • DNS server • WINS server • IP address • NetBIOS • subnet mask



• default gateway 13. A Catalyst 2960 switch has been taken out of storage to be used as a temporary replacement for another switch that needs to be repaired. About a minute after the switch has started, the SYST LED on the front of the switch transitions from blinking green to amber. What is the meaning of the amber SYST LED? • The switch has no configuration file in NVRAM. • The switch has failed POST and must be sent for service. • The switch is functioning properly. • The switch is in half-duplex mode. 14.

Refer to the exhibit. Which combination of cables and symbols is correct? • A - crossover, B - straight-through, C - straight-through • A - crossover, B - rollover, C - straight-through • A - straight-through, B -crossover, C - straight-through • A - straight-through, B -straight-through, C - straight-through • A - straight-through, B - straight-through, C - crossover • A - rollover, B - straight-through, C - straight-through 15. After an unsuccessful ping to the local router, the technician decides to investigate the router. The technician observes that the lights and fan on the router are not operational. In which layer of the OSI model is the problem most likely occurring? • transport • network • data link • physical 16. What are three characteristics of the T protocol? (Choose three.) • exchanges datagrams unreliably • is used to send IP error messages • forces the retransmission of unacknowledged packets • creates a virtual session between end- applications • carries the IP address of the destination host in the T header • is responsible for breaking messages into segments and reassembling them at their destination 17.

Refer to the exhibit. The network shown is connected using services from the same ISP. How will the Fohi router dynamically learn routes to the 192.168.16.16/28,



192.168.16.32/28, and 192.168.16.64/28 subnetworks? • with BGP • with a static route • with a directly connected route • with an interior routing protocol 18.

Refer to the exhibit. Which type of UTP cable should be used to connect Host A to Switch1? • rollover • console • crossover • straight-through 19When customers use credit cards to make purchases at a small business, a modem is heard dialing a telephone number to transfer the transaction data to the central office. What type of WAN serial connection is in use? • leased line • packet switched • circuit switched • point-to-point 20. A reports being unable to access the Internet. The help desk technician employs a bottom-up approach to troubleshooting. The technician first has the check the patch cable connection from the PC to the wall, and then has the that the NIC has a green link light. What will the technician have the do next? • Enter an IP address into the WWW browser address bar to see if DNS is at fault. • Use traceroute to identify the device along the path to the ISP that may be at fault. • the IP address, subnet, and gateway settings using ipconfig on the PC . • Connect to the home router to check firewall settings for blocked T ports. 21.

A ping 192.1.1.20 command is issued on workstation A to determine if workstation B can be reached. What events will occur if this command is successful? (Choose two.) • The router will block the ping request message. • The router will reply to the echo request with a proxy ping response. • Workstation A will send a UDP ping request message to workstation B. • Workstation B will send a UDP ping reply message to workstation A. • Workstation A will send an ICMP echo request message to workstation B. • Workstation B will send an ICMP echo reply message to workstation A. 22. How does a router know of paths to destination networks? (Choose two.) • inspection of the destination IP address in data packets • ARP requests from connected routers • manual configuration of routes • updates from other routers • DH information broadcasts • updates from the SMTP management information base 23.



Refer to the exhibit. Which two statements describe the data conversation shown? (Choose two.) • The data conversation was started by the HTTP application process running on the client. • The data conversation is identified by T port 80 on the client. • The started the data conversation by sending an e-mail. • The IP address of the Internet server is 192.168.17.43 . • The Internet server will send data to port 8547 on the client. 24. What is one purpose of the T three-way handshake? • sending echo requests from the source to the destination host to establish the presence of the destination • determining the IP address of the destination host in preparation for data transfer • requesting the destination to transfer a binary file to the source • synchronizing sequence numbers between source and destination in preparation for data transfer 25. Which type of address is 192.168.17.111/28? • host address • network address • broadcast address • multicast address 26. A customer reports connectivity problems to an ISP technician. Upon questioning the customer, the technician discovers that all network applications are functioning except for FTP. What should the technician suspect is the problem? • misconfigured firewall • bad port on switch or hub • misconfigured IP addressing on the customer's workstation • wrong DNS server configured on the customer's workstation • wrong default gateway configured on the customer's workstation 27.

The show ip route command was executed on one of the routers shown in the graphic and the following output was displayed:



C 192.168.4.0/24 is directly connected, Serial0/0 R 192.168.5.0/24 [120/1] via 192.168.4.2, 00:00:19, Serial0/0 R 192.168.1.0/24 [120/2] via 192.168.3.1, 00:00:20, Serial0/1 R 192.168.2.0/24 [120/2] via 192.168.3.1, 00:00:20, Serial0/1 C 192.168.3.0/24 is directly connected, Serial0/1 From which router was this command executed? •A •B •C •D 28. Refer to the exhibit. Which two sets of commands are required to configure s for all management ports on a Catalyst 2960 switch? (Choose two.) • ALSwitch(config)# interface vlan 1    ALSwitch(config-if)# cisco    ALSwitch(config-if)# • ALSwitch(config)# line vty 0 4    ALSwitch(config-line)# cisco    ALSwitch(config-line)# • ALSwitch(config)# line vty 0 15    ALSwitch(config-line)# cisco    ALSwitch(config-line)# • ALSwitch(config)# enable secret class    ALSwitch(config)# enable cisco • ALSwitch(config)# interface fa0/1    ALSwitch(config-if)# cisco    ALSwitch(config-if)# no shutdown • ALSwitch(config)# line cons 0    ALSwitch(config-line)# cisco    ALSwitch(config-line)# 29. A reports being able to access the Internet but not being able to email from the mail server at the ISP. What should the check on the workstation? • the POP3 and SMTP server settings in the e-mail application • the patch cable connections at the back of the workstation and at the wall plate • the DH settings in the operating system • the IP address, mask, and default gateway values • the NIC drivers 30.

Refer to the graphic. Which command will configure a static route on Router A to direct traffic from LAN A that is destined for LAN C? • RouterA(config)# ip route 192.168.4.0 255.255.255.0 192.168.5.2 • RouterA(config)# ip route 192.168.4.0 255.255.255.0 192.168.3.2 • RouterA(config)# ip route 192.168.5.0 255.255.255.0 192.168.3.2 • RouterA(config)# ip route 192.168.3.0 255.255.255.0 192.168.3.1 • RouterA(config)# ip route 192.168.3.2 255.255.255.0 192.168.4.0 31. Which subnet masks could be used when subnetting a Class B IP address? (Choose two.) • 255.255.255.240 • 255.255.192.0



• • • •

255.255.0.0 255.192.0.0 240.0.0.0 255.0.0.0

32.

Refer to the exhibit. The network has configured the RTA and RTB interfaces. In order to allow hosts that are attached to RTA to reach the server that is attached to RTB, a static route from RTA to the server LAN and a default route from RTB back to RTA need to be configured. Which two commands will the use to accomplish these tasks on the two routers? (Choose two.) • RTA(config)# ip route 10.16.10.5 255.255.255.252 10.16.10.6 • RTA(config)# ip route 0.0.0.0 0.0.0.0 10.16.10.6 • RTA(config)# ip route 10.16.10.96 255.255.255.252 10.16.10.6 • RTB(config)# ip route 10.16.10.6 255.255.255.248 10.16.10.6 • RTB(config)# ip route 0.0.0.0 0.0.0.0 S0/0/1 • RTB(config)# ip route 0.0.0.0 0.0.0.0 10.16.10.6 33. How do port filtering and access lists help provide network security? • They prevent specified types of traffic from reaching specified network destinations. • They alert network s to various type of denial of service attacks as they occur. • They prevent viruses, worms, and Trojans from infecting host computers and servers. • They enable encryption and authentication of confidential data communications. 34.

Refer to the exhibit. The network of the building in the graphic needs to choose the type of cable best suited to add ServerB to the network. Which cable type is the best choice? • STP • UTP • coaxial • fiber optic 35. What is used by a routing protocol to determine the best path to include in the routing table? • Convergence time • Default distance • Metric • Type of router



36.

Refer to the exhibit. Which IP addresses could be assigned to the hosts in the diagram? (Choose two.) • 192.168.65.31 • 192.168.65.32 • 192.168.65.35 • 192.168.65.60 • 192.168.65.63 • 192.168.65.64 37.

Given the network 192.168.25.0 shown in the graphic, which subnet mask would accommodate the number of hosts in each subnet? • 255.255.0.0 • 255.255.224.0 • 255.255.255.0 • 255.255.255.224 • 255.255.255.240 • 255.255.255.248 38. Which two protocols allow network devices to report their status and events to a centralized network management device? (Choose two.) • Syslog • Telnet • HTTP • HTTPS • SNMP 39. What is true regarding the differences between NAT and PAT? • PAT uses the word "overload" at the end of the access-list statement to share a single ed address. • Static NAT allows an uned address to map to multiple ed addresses. • Dynamic NAT allows hosts to receive the same global address each time external access is required. • PAT uses unique source port numbers to distinguish between translations.



40.

Refer to the exhibit. The graphic shows the output of a command issued on router RTB. According to the output, what two statements are true of router RTB? (Choose two.) • The router is connected to a router named Boise. • Router RTB is connected to a Cisco 1841 router. • Router RTB is directly connected to two other routers. • The IP address of the router interface connected to router RTB is 192.168.2.6 . • The RTB router is connected to two Cisco devices by Fast Ethernet links. 41.

Refer to the exhibit. The network uses the command below to configure a default route to the ISP network : RTB(config)# ip route 0.0.0.0 0.0.0.0 10.1.1.6 A ping issued from the ISP is successful to router RTB. However, ping echo request packets arrive at a host that is attached to the Fa0/0 interface of RTB, and the replies do not make it back to the ISP router. What will fix this problem? • The ISP must be configured to forward packets from the 192.168.1.0 network. • The ip route command needs to be edited so that the next hop address is 10.1.1.5. • The ip route command needs to be edited so that the 192.168.1.1 address is the next hop address. • The ip route command should be removed from the RTB router configuration. 42. A network technician is using a network management station to gather data about the performance of devices and links within the ISP. Which application layer protocol makes this possible? • SNMP • FTP • DH • SMTP



43. What are two purposes of DNS? (Choose two.) • to dynamically assign IP addressing information to network hosts • to simplify the istration of host and default gateway addressing on client computers • to assign T port numbers to hosts as part of the data transfer process • to resolve human-readable domain names to numeric IP addresses • to replace the static HOSTS file with a more practical dynamic system 44. A hacker attempts to reach confidential information that is stored on a server inside the corporate network. A network security solution inspects the entire packet, determines that it is a threat, and blocks the packet from entering the inside network. Which security measure protected the network? • an IDS • an IPS • a host-based firewall • Anti-X software 45. How many host addresses may be assigned on each subnetwork when using the 130.68.0.0 network address with a subnet mask of 255.255.248.0? • 30 • 256 • 2046 • 2048 • 4094 • 4096 46. In an IPv4 environment, what information is used by the router to forward data packets from one interface of a router to another? • destination network address • source network address • source MAC address • well known port destination address 47. A small tire retailer requires a low-cost WAN connection to its headquarters in order to manage its inventory and process customer sales in real time. Which WAN connection type is best suited to its needs? • Sonet • T3 • dialup • DSL • leased line 48. The command copy tftp running-config has been entered on the router. What will this command do? • copy the configuration in RAM to a server • copy the configuration file from a server to RAM • copy the configuration file in NVRAM to RAM • copy the configuration file in NVRAM to a server • copy the configuration file from a server to NVRAM 49.

Refer to the exhibit. The network needs to configure the Fa0/0 interface of RTB so that hosts from RTA can connect to the server that is attached to RTB. Which two commands will the use to accomplish this task? (Choose two.)



• • • • • •

RTB# ip address 192.168.102.98 255.255.255.248 RTB(config-if)# ip address 192.168.102.99 255.255.255.252 RTB(config)# ip address 192.168.102.97 255.255.255.252 RTB(config)# no shutdown RTB(config-if)# no shutdown RTB(config-if)# ip address 192.168.102.97 255.255.255.252

50.

Refer to the exhibit. A NOC technician at an ISP enters the command shown. What are two reasons to use this command? (Choose two.) • to map the path to 192.168.1.7 • to test reachability to 192.168.1.7 • to locate connectivity problems along the route to 192.168.1.7 • to identify the ISPs that interconnect the NOC with the remote host with the address 192.168.1.7 • to measure the time that packets take to reach 192.168.1.7 and return to the technician's workstation Posted by CuEiHzO at 12:18 PM Labels: CCNA Discovery 2 Version 4.0 , Small -to -Medium Business , Working at a ISP

0 COMMENTS: Post a Comment Newer Post

Home

Older Post

Subscribe to: Post Comments (Atom)

Amazon.com Kindle Fire, Full Color 7" Multi-touch Display, WiFi Amazon Digital Ser... New $199.00

iPhone 4 / 4S AntiGlare, Anti-Scratch, Anti-Fingerpri... Generic New $1.07

3 pcs Aqua Blue/Black/Red Capacitive Stylus/styli Touc... Generic New $1.47

Kindle US Power Adapter Foxlink (US) New $14.99

Kindle Touch, Wi-Fi, 6" E Ink Display - includes Speci... Amazon Digital Ser... New $99.00

Kindle, Wi-Fi, 6" E Ink Display - includes Special Off... Amazon Digital Ser... New $79.00

3 Pack of Universal Touch Screen Stylus Pen Bargaincell New $0.92

USB Sync and Charging Cable Compatible with Apple iPho... Generic

Certified Refurbished Kindle, Wi-Fi, 6" E Ink Display ... Amazon Digital Ser...



DVI Gear HDMI Cable 2M DVI Gear New $1.60

New $0.93

New $69.00

Transcend 16 GB SDHC Class 10 Flash Memory Card TS16GS... Tristan Pub New $13.91

3 Pack of Crystal Clear Screen Protectors for ... MiniSuit New $2.00

Privacy Information

Cisco Networking Academy Program CCNA Study Center


Ccna 1 Exam Networking Answers_ Ccna Discovery 2 - Final Exam Answers Versio 1g5g2q

Overview 26281t

More details 6y5l6z

Related Documents 3h463d

Ccna 1 Exam Networking Answers_ Ccna Discovery 2 - Final Exam Answers Versio 1g5g2q

Ccna 2 - Final Exam Answers 491n2z

Ccna 1 Final Exam Answers 1mf6z

Ccna 2 Final Exam V4.0 Answers - Ccna Answers - Ccna Exam - Ccna Exams 3c5i44

Ccna Network Fundamentals Chapter 9 Exam Answers - Ccna Exam Answers 3p5r9

Ccna 3 Final Exam V4.0 Answers - Ccna Answers - Ccna Exam - Ccna Exams 5v262o

More Documents from "Miguel Lopez" u3o38

Tarea 2 Gestion Humana Silbania v3m1o

Tarea 5 Psicologia Educativa Yokasta 71hs

Tarea 2-3-4 Terapia Familiar 5q1z3b

Ccna 1 Exam Networking Answers_ Ccna Discovery 2 - Final Exam Answers Versio 1g5g2q

Tarea 1 Cultura Latin Luis o564y

Libro Bio Seduccion Animal 4k142v