Pendo Power Router Manual 43v5j

Contents

1.Overview

1. Overview

3G Wi-Fi Router & USB Power Bank: Pendo_3GWPR 3 in 1: Power Bank, Wi-Fi Router & Access Point

2. Charging the Pendo_3GWPR Router (USB Cable supplied) Up to 4 hours battery life per charge

R: On

3. Using your Pendo_3GWPR Router to charge another device Charge mobile phones, tablets and other devices via USB

Status Light

DC Power Micro USB

C: Charge O: Off

Charge Light

4. Using the Pendo_3GWPR Router as a Wi-Fi Access Point Plug in an Ethernet cable or 3G modem and create an instant Wireless Hotspot in your Hotel/Office/Home.

Battery Indicator Light

4.1 Connect via 3G USB Modem Connect the Power Router to the Dodo 3G USB Modem to create a wireless hotspot 4.2 Connect via Cable/ADSL/DH Modem Connect the Power Router to an Ethernet connection to create a wireless hotspot

Reset

5. Using the Pendo_3GWPR Router as a Wireless Extender Extend an existing Wireless Network in your Hotel/Office/Home and share your broadband connection on multiple devices 6. PC Network Settings Network: Pendo_3GWPR_XXXX : a1b2c3d4e5

RJ45 port (Recognition of WAN/LAN automatically)

3G Modem USB port/Charging port

Quick Installation Guide



2. Charging the Pendo_3GWPR Router

If you have a problem with this device, please check our website at www.pendo.com.au for Frequently Asked Questions (FAQ) and product updates. If these resources do not resolve the problem, please Technical .

There are only two sources of power for Pendo_3GWPR Router:

Steps to charge the batttery as below:

• Via Battery

Step 1: Turn off the Pendo_3GWPR Router.

• Via External Power.

Step 2: Connect the Micro-USB end of the USB Charge Cable to the Pendo_3GWPR Router’s DC power Micro-USB port

Pendo Technical Email:

[email protected]

Web:

www.pendo.com.au

Phone:

1300 275 645, Monday-Friday (9:00AM-5:00PM EST)

Moblie phone Power Adapter

Step 3: Connect the USB end of the USB Charge Cable to a power source such as a PC/Laptop USB Port, Power Adapter USB port, Mobile Phone Charger, Car Lighter Adapter, etc. NOTE:

US

BC

ab

While charging, the Pendo_3GWPR Router’s Battery Light will turn Blue. le

USB Cable

US

BC

ab

le

Car charger

When fully charged, the Pendo_3GWPR Router’s Battery Light will turn OFF. Charging will take approximately 3 hours to complete. The battery can usually last approximately 3-4 hours of usage per full charge. To check the battery level, press the ‘T’ battery indicator button.

3. Using your Pendo_3GWPR Router to charge another device The Pendo_3GWPR Router’s USB port can be used to charge the battery of other devices such as mobile phones, MP3 players and tablets. Step 1: Connect your device with a USB cable to the Pendo_3GWPR Router’s USB port Step 2: Switch the Pendo_3GWPR Router Power Switch to ‘C’ NOTE: When the Pendo_3GWPR Router Power Switch is switched to ‘C’, the Pendo_3GWPR Router will power OFF and start charging the connected device.

iPhone

iPad

Digital Camera

PSP

iPod

4. Using the Pendo_3GWPR Router as a Wi-Fi Access Port 4.1 Connect via 3G USB Modem

4.2 Connect via Cable/ADSL/DH Modem

Before you begin, please make sure you have these items:

Before you begin, please make sure you have these items:

1. Pendo_3GWPR Router

1. Pendo_3GWPR Router

2. Dodo 3G USB Modem 3. Dodo SIM Card (activated and with a data plan)

2. Switch, Router, ADSL Modem or Ethernet Port with Internet access ready (eg: existing office LAN, hotel LAN, etc which has a ready Internet connection)

Hardware Installation Steps:

3. RJ45 Cable

Step 1: Insert the Dodo 3G SIM Card into the Dodo 3G USB Modem

Hardware Installation Steps:

Step 2: Connect the Dodo 3G USB Modem to the Pendo_3GWPR Router’s USB port

Step 1: Connect the Ethernet Port, Switch, Router or ADSL Modem LAN port to one-end of the RJ45 cable

Step 3: Switch the Pendo_3GWPR Router Power Switch to ‘R’

Step 3: Switch the Pendo_3GWPR Router Power Switch to ‘R’

Step 4: Open your PC/phone/tablet Wireless Network settings and connect to the network Wi-Fi SSID: Pendo_3GWPR

Step 4: Open your PC/phone/tablet Wireless Network settings and connect to the network Wi-Fi SSID: Pendo_3GWPR

Step 5: Enter the as “a1b2c3d4e5”

Step 6: Connect and surf the Internet

Step 6: Connect and surf the Internet

NOTE:

Step 2: Connect the other end of the RJ45 cable to the Pendo_3GWPR Router’s WAN/LAN port

Step 5: Enter the as “a1b2c3d4e5” Computer

If you cannot surf, please do the following operations: Open a browser and enter http://192.168.169.1 at the address bar

iPhone

W

Select ‘WiFi’

iFi

Enter the as “a1b2c3d4e5”

Tablets/iPad

Select: Internet > WAN Network

iPad

Select “DH” as the ‘WAN Connection Type’ WiFi

Wi

Select ‘Apply’

Fi

Smartphones

Computer

6. PC Network Settings

5. Using Pendo_3GWPR Router as a Wireless Extender Before you begin, please make sure you have these items:

Make sure that the PC has the Wi-Fi function activated.

1. Pendo_3GWPR Router

When Wi-Fi is ON, refresh the wireless network list and select the Wi-Fi SSID: Pendo_3GWPR_XXXX

2. Wi-Fi network

Note: XXXX is the 8th to 11th characters of the MAC Address and Router.

Hardware Installation Steps: Step 1: Switch the Pendo_3GWPR Router Power Switch to ‘R’

Make sure the Wi-Fi is connected and there is internet access.

Step 2: Open your PC/phone/tablet Wireless Network settings and connect to the network Wi-Fi SSID: Pendo_3GWPR

This means you are ready to use the Internet.

Step 3: Enter the as “a1b2c3d4e5” Step 5: Select and enter the as “a1b2c3d4e5”

If your computer or device does not have a Wi-Fi function, please use a RJ45 cable to connect your Wi-Fi device or PC with the Pendo_3GWPR Router through the LAN port.

Step 6: Select the ‘Internet’ tab on the top and set the WAN connection type as Wi-Fi

Changing your :

Step 7: You will need to click on ‘Select all API’s’ to scan all the Wi-Fi networks in your location

The Pendo_3GWPR Router Wi-Fi is recommended to be changed. If in any case the has been lost or forgotten, reset the modem to Factory Default Settings by pressing the hard reset button for more than 5 seconds. This will reset the back to: “a1b2c3d4e5”

Step 4: Open a browser and enter http://192.168.169.1 at the address bar

Step 8: Select your desired network and enter the Wi-Fi if there is one and then click 'Apply’ Step 9: Connect and surf the Internet

Smartphones

Computer

Tablets/iPad