Wolfnoir Mask 1n392d
This document was ed by and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this report form. Report 3i3n4
Overview 26281t
& View Wolfnoir Mask as PDF for free.
More details 6y5l6z
- Words: 902
- Pages: 16
#BECOMEWOLFNOIR Materials list - Printing device - Paper sheets for printing / A4 or US Letter paper - Thick paper or thin cardboard. 160-300g. You need 10 pages - Spray mount or Glue stick to glue the paper patterns on your cardboard if you use method A - Scissors and a craft knife. - Adhesive tape. (transparent) - Thick needle and ruler to scold the folds
- (Optional!) Wood Glue and a small brush if you prefer to use the glue flaps.
Printing - The templates should not be scaled. In your printer settings do not select to fit the paper. The patterns fit to A4 paper (210 mm x 297 mm) or US Letter paper (8½" X 11").
PAGE 1/15
A How to print and fold thick paper/ numbers hidden The numbers will be inside of your mask
(1) Print out your patterns on thin paper. (Do not scale the pattern) (2) Glue your patterns on the backside of your cardboard you would like to use. We recommend Spray Glue or a glue stick. Dont use glue that wets the paper too much. Your printed pattern lines will be on the inside of your final mask. (3) Cut out the patterns along the solid
cutting lines for each piece. The dashed lines are the folding lines so make sure not to cut them. (If you want to use adhesive tape you can cut away the glue flaps) (4) Score the outward and inward folding lines with a thick needle or a stencil pen, then crease and fold along the lines. The dashed lines are either valley or mountain folds. Make sure to fold the patterns in the right direction.
IMPORTANT
Mountain fold line
Valley fold line
Cut line
Glue flap
PAGE 2/15
B How to print and fold thin paper/ numbers visible The numbers will be outside of your mask
(1) Print out your patterns on your final paper.(Do not scale the pattern) (2) Cut out the patterns along the solid cutting lines for each piece. The dashed lines are the folding lines so make sure not to cut them. (If you want to use adhesive tape you can cut away the glue flaps)
(4) Score the outward and inward folding lines with a thick needle or a stencil pen, then crease and fold along the lines. The dashed lines are either valley or mountain folds. Make sure to fold the patterns in the right direction.
IMPORTANT
Mountain fold line
Valley fold line
Cut line
Glue flap
PAGE 3/15
How to assemble Assembly (5) Find the matching numbers and glue the corresponding sides together. We recommend two options.
(6) After completing the mask we recommend to glue the headband together on the final page. Tape it to the inside to get an optimal fit of the mask. (7) Let your creativity flow. You can decorate and color your mask anyway you like.
Option 1 / Easy Adhesive tape Use adhesive tape to fix the corresponding sides from the outside. pro: easy and fast contra: tape is visible from the outside
Have fun we woulD lovE to See yOur CreatioNs. Option 2 / Advanced Glue We recommend wood glue express to glue the flaps together. Just use a thin layer otherwise the paper gets too soggy. Use a small brush to apply the glue on the flap. After drying the woodglue gets invisible. You can also use a glue stick but the connection is not very durable.
viSit uS on faCebooK or etsy To seE morE desIgns wWw.FaceboOk.cOm/WemakEawesOmepaTternS
wWw.etSy.cOm/shOp/awEsomepaTternS
pro: invisible contra: time consuming Glue all parts together to complete the model.
PAGE 4/15
yoU havE queStions? uS [email protected]
If you printed this pattern 1:1 the line should be 100mm
100mm 1
55
gluE flapS 35
32
31
34
30
33
48
37
#BECOMEWOLFNOIR PAGE 5/15
24
34
29 24
26 23
21
19
glue TogetheR
27
27
46 23
25
25
28
52
28
glue TogetheR
22
53
26
22
21 29
PAGE 6/15
35
47
46 44
45 7
39
41
2
40
42
43
PAGE 7/15
41
40
45 52
54
glUe toGetheR 53
42
54 58
10
58
55 56
glUe toGetheR
57
PAGE 8/15
56
16
12
15 9
11 3 43 9
10
12
13
13
PAGE 9/15
8
6 5
8
39
2
5
3
6
11 50
4 7
PAGE 10/15
16 15
14
18
51
4
17
33 30
50 14
17
PAGE 11/15
48 31
20 49
51 44
PAGE 12/15
18
38 38
32
57 37
36 36
1
PAGE 13/15
19 47 49
20
PAGE 14/15
The Head Band The Head Band is an additional fix to make sure that the mask fits you well. Follow the instructions below and glue it to the inside of the mask. (1) Cut 3 Stripes out of A4/US letter paper.
(3) Cut out two more stripes and glue them to the sides of the ring (see drawing below).
(2) Glue the stripes together with tape and wrap the band around your head. Make sure the band fits well. Then glue it together so you have a closed ring.
(4) Place the head band inside of the mask and fix it to the mask.
A4 papeR / us leTter papeR
30mm 30mm 30mm
30mm Glue to the inside of the mask
60mm
Tape together
Tape together
60mm
Tape together
Tape together
PAGE 15/15
- (Optional!) Wood Glue and a small brush if you prefer to use the glue flaps.
Printing - The templates should not be scaled. In your printer settings do not select to fit the paper. The patterns fit to A4 paper (210 mm x 297 mm) or US Letter paper (8½" X 11").
PAGE 1/15
A How to print and fold thick paper/ numbers hidden The numbers will be inside of your mask
(1) Print out your patterns on thin paper. (Do not scale the pattern) (2) Glue your patterns on the backside of your cardboard you would like to use. We recommend Spray Glue or a glue stick. Dont use glue that wets the paper too much. Your printed pattern lines will be on the inside of your final mask. (3) Cut out the patterns along the solid
cutting lines for each piece. The dashed lines are the folding lines so make sure not to cut them. (If you want to use adhesive tape you can cut away the glue flaps) (4) Score the outward and inward folding lines with a thick needle or a stencil pen, then crease and fold along the lines. The dashed lines are either valley or mountain folds. Make sure to fold the patterns in the right direction.
IMPORTANT
Mountain fold line
Valley fold line
Cut line
Glue flap
PAGE 2/15
B How to print and fold thin paper/ numbers visible The numbers will be outside of your mask
(1) Print out your patterns on your final paper.(Do not scale the pattern) (2) Cut out the patterns along the solid cutting lines for each piece. The dashed lines are the folding lines so make sure not to cut them. (If you want to use adhesive tape you can cut away the glue flaps)
(4) Score the outward and inward folding lines with a thick needle or a stencil pen, then crease and fold along the lines. The dashed lines are either valley or mountain folds. Make sure to fold the patterns in the right direction.
IMPORTANT
Mountain fold line
Valley fold line
Cut line
Glue flap
PAGE 3/15
How to assemble Assembly (5) Find the matching numbers and glue the corresponding sides together. We recommend two options.
(6) After completing the mask we recommend to glue the headband together on the final page. Tape it to the inside to get an optimal fit of the mask. (7) Let your creativity flow. You can decorate and color your mask anyway you like.
Option 1 / Easy Adhesive tape Use adhesive tape to fix the corresponding sides from the outside. pro: easy and fast contra: tape is visible from the outside
Have fun we woulD lovE to See yOur CreatioNs. Option 2 / Advanced Glue We recommend wood glue express to glue the flaps together. Just use a thin layer otherwise the paper gets too soggy. Use a small brush to apply the glue on the flap. After drying the woodglue gets invisible. You can also use a glue stick but the connection is not very durable.
viSit uS on faCebooK or etsy To seE morE desIgns wWw.FaceboOk.cOm/WemakEawesOmepaTternS
wWw.etSy.cOm/shOp/awEsomepaTternS
pro: invisible contra: time consuming Glue all parts together to complete the model.
PAGE 4/15
yoU havE queStions? uS [email protected]
If you printed this pattern 1:1 the line should be 100mm
100mm 1
55
gluE flapS 35
32
31
34
30
33
48
37
#BECOMEWOLFNOIR PAGE 5/15
24
34
29 24
26 23
21
19
glue TogetheR
27
27
46 23
25
25
28
52
28
glue TogetheR
22
53
26
22
21 29
PAGE 6/15
35
47
46 44
45 7
39
41
2
40
42
43
PAGE 7/15
41
40
45 52
54
glUe toGetheR 53
42
54 58
10
58
55 56
glUe toGetheR
57
PAGE 8/15
56
16
12
15 9
11 3 43 9
10
12
13
13
PAGE 9/15
8
6 5
8
39
2
5
3
6
11 50
4 7
PAGE 10/15
16 15
14
18
51
4
17
33 30
50 14
17
PAGE 11/15
48 31
20 49
51 44
PAGE 12/15
18
38 38
32
57 37
36 36
1
PAGE 13/15
19 47 49
20
PAGE 14/15
The Head Band The Head Band is an additional fix to make sure that the mask fits you well. Follow the instructions below and glue it to the inside of the mask. (1) Cut 3 Stripes out of A4/US letter paper.
(3) Cut out two more stripes and glue them to the sides of the ring (see drawing below).
(2) Glue the stripes together with tape and wrap the band around your head. Make sure the band fits well. Then glue it together so you have a closed ring.
(4) Place the head band inside of the mask and fix it to the mask.
A4 papeR / us leTter papeR
30mm 30mm 30mm
30mm Glue to the inside of the mask
60mm
Tape together
Tape together
60mm
Tape together
Tape together
PAGE 15/15
Related Documents 3h463d
Wolfnoir Mask 1n392d
May 2020 7
Mask Activity 496r54
January 2022 0
Wildcard Mask 214z1z
October 2022 0
Bagheera Mask j202g
May 2023 0
Exchange Ticket Mask 3im4o
October 2019 37
Mask Agua Potable Huancane 4r3f2d
July 2020 0More Documents from "EvaristoFernandez" 93eg